@@ -2482,8 +2482,7 @@ static void bnx2x_bz_fp(struct bnx2x *bp, int index)
*/
if (bp->dev->features & NETIF_F_LRO)
fp->mode = TPA_MODE_LRO;
- else if (bp->dev->features & NETIF_F_GRO &&
- bnx2x_mtu_allows_gro(bp->dev->mtu))
+ else if (bp->dev->features & NETIF_F_GRO_HW)
fp->mode = TPA_MODE_GRO;
else
fp->mode = TPA_MODE_DISABLED;
@@ -4874,6 +4873,9 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
*/
dev->mtu = new_mtu;
+ if (!bnx2x_mtu_allows_gro(new_mtu))
+ dev->features &= ~NETIF_F_GRO_HW;
+
if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
@@ -4907,6 +4909,8 @@ netdev_features_t bnx2x_fix_features(struct net_device *dev,
features &= ~NETIF_F_LRO;
features &= ~NETIF_F_GRO;
}
+ if (!bnx2x_mtu_allows_gro(dev->mtu))
+ features &= ~NETIF_F_GRO_HW;
return features;
}
@@ -4933,13 +4937,12 @@ int bnx2x_set_features(struct net_device *dev, netdev_features_t features)
}
}
- /* if GRO is changed while LRO is enabled, don't force a reload */
- if ((changes & NETIF_F_GRO) && (features & NETIF_F_LRO))
- changes &= ~NETIF_F_GRO;
+ /* Don't care about GRO changes */
+ changes &= ~NETIF_F_GRO;
/* if GRO is changed while HW TPA is off, don't force a reload */
- if ((changes & NETIF_F_GRO) && bp->disable_tpa)
- changes &= ~NETIF_F_GRO;
+ if ((changes & NETIF_F_GRO_HW) && bp->disable_tpa)
+ changes &= ~NETIF_F_GRO_HW;
if (changes)
bnx2x_reload = true;
@@ -13273,7 +13273,7 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
- NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO |
+ NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | NETIF_F_GRO_HW |
NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX;
if (!chip_is_e1x) {
dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM |
@@ -13309,6 +13309,8 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX;
dev->features |= NETIF_F_HIGHDMA;
+ if (dev->features & NETIF_F_GRO_HW)
+ dev->features &= ~NETIF_F_LRO;
/* Add Loopback capability to the device */
dev->hw_features |= NETIF_F_LOOPBACK;
Advertise NETIF_F_GRO_HW and turn on TPA_MODE_GRO when NETIF_F_GRO_HW is set. Disable NETIF_F_GRO_HW in bnx2x_fix_features() if the MTU does not support TPA_MODE_GRO. bnx2x_change_mtu() also needs to disable NETIF_F_GRO_HW if the MTU does not support it. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 17 ++++++++++------- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +++- 2 files changed, 13 insertions(+), 8 deletions(-)