@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* ethtool.h: Defines for Linux ethtool.
*
@@ -1236,6 +1237,47 @@ struct ethtool_per_queue_op {
char data[];
};
+/**
+ * struct ethtool_fecparam - Ethernet forward error correction(fec) parameters
+ * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM
+ * @active_fec: FEC mode which is active on porte
+ * @fec: Bitmask of supported/configured FEC modes
+ * @rsvd: Reserved for future extensions. i.e FEC bypass feature.
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ */
+struct ethtool_fecparam {
+ __u32 cmd;
+ /* bitmask of FEC modes */
+ __u32 active_fec;
+ __u32 fec;
+ __u32 reserved;
+};
+
+/**
+ * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration
+ * @ETHTOOL_FEC_NONE: FEC mode configuration is not supported
+ * @ETHTOOL_FEC_AUTO: Default/Best FEC mode provided by driver
+ * @ETHTOOL_FEC_OFF: No FEC Mode
+ * @ETHTOOL_FEC_RS: Reed-Solomon Forward Error Detection mode
+ * @ETHTOOL_FEC_BASER: Base-R/Reed-Solomon Forward Error Detection mode
+ */
+enum ethtool_fec_config_bits {
+ ETHTOOL_FEC_NONE_BIT,
+ ETHTOOL_FEC_AUTO_BIT,
+ ETHTOOL_FEC_OFF_BIT,
+ ETHTOOL_FEC_RS_BIT,
+ ETHTOOL_FEC_BASER_BIT,
+};
+
+#define ETHTOOL_FEC_NONE (1 << ETHTOOL_FEC_NONE_BIT)
+#define ETHTOOL_FEC_AUTO (1 << ETHTOOL_FEC_AUTO_BIT)
+#define ETHTOOL_FEC_OFF (1 << ETHTOOL_FEC_OFF_BIT)
+#define ETHTOOL_FEC_RS (1 << ETHTOOL_FEC_RS_BIT)
+#define ETHTOOL_FEC_BASER (1 << ETHTOOL_FEC_BASER_BIT)
+
/* CMDs currently supported */
#define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings.
* Please use ETHTOOL_GLINKSETTINGS
@@ -1328,6 +1370,8 @@ struct ethtool_per_queue_op {
#define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */
#define ETHTOOL_PHY_GTUNABLE 0x0000004e /* Get PHY tunable configuration */
#define ETHTOOL_PHY_STUNABLE 0x0000004f /* Set PHY tunable configuration */
+#define ETHTOOL_GFECPARAM 0x00000050 /* Get FEC settings */
+#define ETHTOOL_SFECPARAM 0x00000051 /* Set FEC settings */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
@@ -1382,9 +1426,12 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_10000baseLR_Full_BIT = 44,
ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT = 45,
ETHTOOL_LINK_MODE_10000baseER_Full_BIT = 46,
- ETHTOOL_LINK_MODE_2500baseT_Full_BIT = 47,
- ETHTOOL_LINK_MODE_5000baseT_Full_BIT = 48,
+ ETHTOOL_LINK_MODE_2500baseT_Full_BIT = 47,
+ ETHTOOL_LINK_MODE_5000baseT_Full_BIT = 48,
+ ETHTOOL_LINK_MODE_FEC_NONE_BIT = 49,
+ ETHTOOL_LINK_MODE_FEC_RS_BIT = 50,
+ ETHTOOL_LINK_MODE_FEC_BASER_BIT = 51,
/* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
* 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
@@ -1393,7 +1440,7 @@ enum ethtool_link_mode_bit_indices {
*/
__ETHTOOL_LINK_MODE_LAST
- = ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+ = ETHTOOL_LINK_MODE_FEC_BASER_BIT,
};
#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \
@@ -1484,13 +1531,17 @@ enum ethtool_link_mode_bit_indices {
* it was forced up into this mode or autonegotiated.
*/
-/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal. */
+/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal.
+ * Update drivers/net/phy/phy.c:phy_speed_to_str() and
+ * drivers/net/bonding/bond_3ad.c:__get_link_speed() when adding new values.
+ */
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
#define SPEED_2500 2500
#define SPEED_5000 5000
#define SPEED_10000 10000
+#define SPEED_14000 14000
#define SPEED_20000 20000
#define SPEED_25000 25000
#define SPEED_40000 40000
@@ -1633,6 +1684,7 @@ enum ethtool_reset_flags {
ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
ETH_RESET_RAM = 1 << 7, /* RAM shared between
* multiple components */
+ ETH_RESET_AP = 1 << 8, /* Application processor */
ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
* this interface */
@@ -1701,6 +1753,8 @@ enum ethtool_reset_flags {
* %ethtool_link_mode_bit_indices for the link modes, and other
* link features that the link partner advertised through
* autonegotiation; 0 if unknown or not applicable. Read-only.
+ * @transceiver: Used to distinguish different possible PHY types,
+ * reported consistently by PHYLIB. Read-only.
*
* If autonegotiation is disabled, the speed and @duplex represent the
* fixed link mode and are writable if the driver supports multiple
@@ -1752,7 +1806,9 @@ struct ethtool_link_settings {
__u8 eth_tp_mdix;
__u8 eth_tp_mdix_ctrl;
__s8 link_mode_masks_nwords;
- __u32 reserved[8];
+ __u8 transceiver;
+ __u8 reserved1[3];
+ __u32 reserved[7];
__u32 link_mode_masks[0];
/* layout of link_mode_masks fields:
* __u32 map_supported[link_mode_masks_nwords];
This covers kernel changes up to: commit 40e44a1e669d078946f46853808a60d29e6f0885 Author: Scott Branden <scott.branden@broadcom.com> Date: Thu Nov 30 11:35:59 2017 -0800 net: ethtool: add support for reset of AP inside NIC interface. Add ETH_RESET_AP to reset the application processor(s) inside the NIC interface. Current ETH_RESET_MGMT supports a management processor inside this NIC. This is typically used for remote NIC management purposes. Application processors exist inside some SmartNICs to run various applications inside the NIC processor - be it a simple algorithm without an OS to as complex as hosting multiple VMs. Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Scott Branden <scott.branden@broadcom.com> --- ethtool-copy.h | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 61 insertions(+), 5 deletions(-)