diff mbox series

ahci: qoriq: refine port register configuration

Message ID 20171204090120.2142-1-andy.tang@nxp.com
State Not Applicable
Delegated to: David Miller
Headers show
Series ahci: qoriq: refine port register configuration | expand

Commit Message

Andy Tang Dec. 4, 2017, 9:01 a.m. UTC 
From: Yuantian Tang <andy.tang@nxp.com>

These PP2C and PP3C registers control the configuration of the PHY
control OOB timing for the COMINIT/COMWAKE parameters respectively
for sata port. Overwrite default values with calculated ones to get
better OOB timing.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
---
 drivers/ata/ahci_qoriq.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Tejun Heo Dec. 4, 2017, 8:19 p.m. UTC | #1 
On Mon, Dec 04, 2017 at 05:01:20PM +0800, andy.tang@nxp.com wrote:
> From: Yuantian Tang <andy.tang@nxp.com>
> 
> These PP2C and PP3C registers control the configuration of the PHY
> control OOB timing for the COMINIT/COMWAKE parameters respectively
> for sata port. Overwrite default values with calculated ones to get
> better OOB timing.
> 
> Signed-off-by: Tang Yuantian <andy.tang@nxp.com>

Applied to libata/for-4.15-fixes.

Thanks.
diff mbox series

Patch

diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index b6b0bf76dfc7..2685f28160f7 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -35,6 +35,8 @@ 
 
 /* port register default value */
 #define AHCI_PORT_PHY_1_CFG	0xa003fffe
+#define AHCI_PORT_PHY2_CFG	0x28184d1f
+#define AHCI_PORT_PHY3_CFG	0x0e081509
 #define AHCI_PORT_TRANS_CFG	0x08000029
 #define AHCI_PORT_AXICC_CFG	0x3fffffff
 
@@ -183,6 +185,8 @@  static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
 				qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -190,6 +194,8 @@  static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 
 	case AHCI_LS2080A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -201,6 +207,8 @@  static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
 				qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -212,6 +220,8 @@  static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
 		       qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -219,6 +229,8 @@  static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 
 	case AHCI_LS2088A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);