diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index cd540e99ea..d459755904 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -381,6 +381,8 @@ dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
 
 dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
 
+dtb-$(CONFIG_ARCH_MX8M) += fsl-imx8mq-evk.dtb
+
 dtb-$(CONFIG_RCAR_GEN3) += \
 	r8a7795-h3ulcb.dtb \
 	r8a7795-salvator-x.dtb \
diff --git a/arch/arm/dts/fsl-imx8mq-evk.dts b/arch/arm/dts/fsl-imx8mq-evk.dts
new file mode 100644
index 0000000000..f0aa3485e6
--- /dev/null
+++ b/arch/arm/dts/fsl-imx8mq-evk.dts
@@ -0,0 +1,424 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+/* First 128KB is for PSCI ATF. */
+/memreserve/ 0x40000000 0x00020000;
+
+#include "fsl-imx8mq.dtsi"
+
+/ {
+	model = "Freescale i.MX8MQ EVK";
+	compatible = "fsl,imx8mq-evk", "fsl,imx8mq";
+
+	chosen {
+		bootargs = "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usdhc2_vmmc: usdhc2_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		ledpwm2 {
+			label = "PWM2";
+			pwms = <&pwm2 0 50000>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx8mq-evk {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+				MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO	0x23
+				MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+				MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+				MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+				MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+				MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+				MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+				MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+				MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+				MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+				MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+				MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+				MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+				MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL	0x4000007f
+				MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA	0x4000007f
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL	0x4000007f
+				MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA	0x4000007f
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x16
+			>;
+		};
+
+		pinctrl_qspi: qspigrp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x82
+				MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+				MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+				MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+				MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+				MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x83
+				MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc3
+				MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0	0xc3
+				MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1	0xc3
+				MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2	0xc3
+				MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3	0xc3
+				MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4	0xc3
+				MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5	0xc3
+				MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6	0xc3
+				MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7	0xc3
+				MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x83
+				MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x85
+				MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc5
+				MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0	0xc5
+				MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1	0xc5
+				MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2	0xc5
+				MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3	0xc5
+				MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4	0xc5
+				MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5	0xc5
+				MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6	0xc5
+				MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7	0xc5
+				MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x85
+				MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x87
+				MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc7
+				MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0	0xc7
+				MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1	0xc7
+				MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2	0xc7
+				MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3	0xc7
+				MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4	0xc7
+				MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5	0xc7
+				MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6	0xc7
+				MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7	0xc7
+				MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x87
+				MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1
+			>;
+		};
+
+		pinctrl_usdhc2_gpio: usdhc2grpgpio {
+			fsl,pins = <
+				MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+				MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83
+				MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3
+				MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc3
+				MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc3
+				MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc3
+				MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc3
+				MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x85
+				MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc5
+				MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc5
+				MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc5
+				MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc5
+				MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc5
+				MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x87
+				MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc7
+				MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc7
+				MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc7
+				MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc7
+				MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc7
+				MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+				MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+				MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+				MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+				MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8	0xd6
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+			>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			at803x,led-act-blind-workaround;
+			at803x,eee-disabled;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+	disp-dev = "mipi_dsi_northwest";
+	display = <&display0>;
+
+	display0: display@0 {
+		bits-per-pixel = <24>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+			clock-frequency = <9200000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: n25q256a@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		spi-nor,ddr-quad-read-dummy = <6>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/mach-imx/mx8m/Kconfig b/arch/arm/mach-imx/mx8m/Kconfig
index 3a84c2f2b0..e3b57b7915 100644
--- a/arch/arm/mach-imx/mx8m/Kconfig
+++ b/arch/arm/mach-imx/mx8m/Kconfig
@@ -7,4 +7,16 @@ config MX8M
 config SYS_SOC
 	default "mx8m"
 
+choice
+	prompt  "NXP i.MX8M board select"
+	optional
+
+config TARGET_MX8MQ_EVK
+	bool "mx8mq_evk"
+	select MX8M
+
+endchoice
+
+source "board/freescale/mx8mq_evk/Kconfig"
+
 endif
diff --git a/board/freescale/mx8mq_evk/Kconfig b/board/freescale/mx8mq_evk/Kconfig
new file mode 100644
index 0000000000..4e23002803
--- /dev/null
+++ b/board/freescale/mx8mq_evk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MX8MQ_EVK
+
+config SYS_BOARD
+	default "mx8mq_evk"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_CONFIG_NAME
+	default "mx8mq_evk"
+
+endif
diff --git a/board/freescale/mx8mq_evk/Makefile b/board/freescale/mx8mq_evk/Makefile
new file mode 100644
index 0000000000..60c99d4194
--- /dev/null
+++ b/board/freescale/mx8mq_evk/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright 2017 NXP
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += mx8mq_evk.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+endif
diff --git a/board/freescale/mx8mq_evk/README b/board/freescale/mx8mq_evk/README
new file mode 100644
index 0000000000..6be5f51a22
--- /dev/null
+++ b/board/freescale/mx8mq_evk/README
@@ -0,0 +1,38 @@
+U-Boot for the NXP i.MX8MQ EVK board
+
+Quick Start
+====================
+- Build the ARM Trusted firmware binary
+- Build U-Boot
+- Generate flash.bin using imx-mkimage
+- Boot
+
+Build the ARM Trusted firmware
+====================
+$ make PLAT=imx8mq bl31
+
+Build U-Boot
+====================
+$ export ARCH=arm64
+$ export CROSS_COMPILE=aarch64-poky-linux-
+$ make mx8mq_evk_defconfig
+$ make
+
+Generate flash.bin using imx-mkimage
+====================
+Copy bl31.bin u-boot-nodtb.bin u-boot-spl.bin fsl-imx8mq-evk.dtb to
+     imx-mkimage/iMX8M
+Copy lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_imem.bin
+     lpddr4_pmu_train_2d_dmem.bin lpddr4_pmu_train_2d_imem.bin to
+     imx-mkimage/iMX8M
+If you want to run with HDMI, copy signed_hdmi_imx8m.bin to imx-mkimage/iMX8M
+
+make SOC=iMX8M flash_spl_uboot or make SOC=iMX8M flash_hdmi_spl_uboot to
+generate flash.bin.
+
+Burn the flash.bin to MicroSD card offset 33KB
+$sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33
+
+Boot
+====================
+Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
diff --git a/board/freescale/mx8mq_evk/mx8mq_evk.c b/board/freescale/mx8mq_evk/mx8mq_evk.c
new file mode 100644
index 0000000000..e31678efb7
--- /dev/null
+++ b/board/freescale/mx8mq_evk/mx8mq_evk.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm-generic/gpio.h>
+#include <fsl_esdhc.h>
+#include <mmc.h>
+#include <asm/arch/mx8mq_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/gpio.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/arch/clock.h>
+#include <spl.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define QSPI_PAD_CTRL	(PAD_CTL_DSE2 | PAD_CTL_HYS)
+
+#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
+
+#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+	IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
+};
+
+#ifdef CONFIG_FSL_QSPI
+static iomux_v3_cfg_t const qspi_pads[] = {
+	IMX8MQ_PAD_NAND_ALE__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	IMX8MQ_PAD_NAND_CE0_B__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+
+	IMX8MQ_PAD_NAND_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	IMX8MQ_PAD_NAND_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	IMX8MQ_PAD_NAND_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	IMX8MQ_PAD_NAND_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+};
+
+int board_qspi_init(void)
+{
+	imx_iomux_v3_setup_multiple_pads(qspi_pads, ARRAY_SIZE(qspi_pads));
+
+	set_clk_qspi();
+
+	return 0;
+}
+#endif
+
+static iomux_v3_cfg_t const uart_pads[] = {
+	IMX8MQ_PAD_UART1_RXD__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	IMX8MQ_PAD_UART1_TXD__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+	set_wdog_reset(wdog);
+
+	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	/* rom_pointer[1] contains the size of TEE occupies */
+	if (rom_pointer[1])
+		gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
+	else
+		gd->ram_size = PHYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+#ifdef CONFIG_FEC_MXC
+#define FEC_RST_PAD IMX_GPIO_NR(1, 9)
+static iomux_v3_cfg_t const fec1_rst_pads[] = {
+	IMX8MQ_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_fec(void)
+{
+	imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
+					 ARRAY_SIZE(fec1_rst_pads));
+
+	gpio_request(IMX_GPIO_NR(1, 9), "fec1_rst");
+	gpio_direction_output(IMX_GPIO_NR(1, 9), 0);
+	udelay(500);
+	gpio_direction_output(IMX_GPIO_NR(1, 9), 1);
+}
+
+static int setup_fec(void)
+{
+	struct iomuxc_gpr_base_regs *gpr =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	setup_iomux_fec();
+
+	/* Use 125M anatop REF_CLK1 for ENET1, not from external */
+	clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0);
+	return set_clk_enet(ENET_125MHZ);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	/* enable rgmii rxc skew and phy mode select to RGMII copper */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
+
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+	return 0;
+}
+#endif
+
+int board_init(void)
+{
+	board_qspi_init();
+
+#ifdef CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+	return 0;
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	env_set("board_name", "EVK");
+	env_set("board_rev", "iMX8MQ");
+#endif
+
+	return 0;
+}
diff --git a/board/freescale/mx8mq_evk/spl.c b/board/freescale/mx8mq_evk/spl.c
new file mode 100644
index 0000000000..522d076124
--- /dev/null
+++ b/board/freescale/mx8mq_evk/spl.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/arch/mx8mq_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
+#include <asm/arch/clock.h>
+#include <asm/mach-imx/gpio.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <fsl_esdhc.h>
+#include <mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak void ddr_init(void)
+{
+};
+
+void spl_dram_init(void)
+{
+	/* ddr init */
+	ddr_init();
+}
+
+#define I2C_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+struct i2c_pads_info i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode = IMX8MQ_PAD_I2C1_SCL__I2C1_SCL | PC,
+		.gpio_mode = IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14 | PC,
+		.gp = IMX_GPIO_NR(5, 14),
+	},
+	.sda = {
+		.i2c_mode = IMX8MQ_PAD_I2C1_SDA__I2C1_SDA | PC,
+		.gpio_mode = IMX8MQ_PAD_I2C1_SDA__GPIO5_IO15 | PC,
+		.gp = IMX_GPIO_NR(5, 15),
+	},
+};
+
+#define USDHC2_CD_GPIO	IMX_GPIO_NR(2, 12)
+#define USDHC1_PWR_GPIO IMX_GPIO_NR(2, 10)
+#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19)
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		ret = 1;
+		break;
+	case USDHC2_BASE_ADDR:
+		ret = !gpio_get_value(USDHC2_CD_GPIO);
+		return ret;
+	}
+
+	return 1;
+}
+
+#define USDHC_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | \
+			 PAD_CTL_FSEL2)
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	IMX8MQ_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_DATA4__USDHC1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_DATA5__USDHC1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_DATA7__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD1_RESET_B__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+	IMX8MQ_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	IMX8MQ_PAD_SD2_CD_B__GPIO2_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IMX8MQ_PAD_SD2_RESET_B__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
+	{USDHC1_BASE_ADDR, 0, 8},
+	{USDHC2_BASE_ADDR, 0, 4},
+};
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+	/*
+	 * According to the board_mmc_init() the following map is done:
+	 * (U-Boot device node)    (Physical Port)
+	 * mmc0                    USDHC1
+	 * mmc1                    USDHC2
+	 */
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			init_clk_usdhc(0);
+			usdhc_cfg[0].sdhc_clk = mxc_get_clock(USDHC1_CLK_ROOT);
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+			gpio_request(USDHC1_PWR_GPIO, "usdhc1_reset");
+			gpio_direction_output(USDHC1_PWR_GPIO, 0);
+			udelay(500);
+			gpio_direction_output(USDHC1_PWR_GPIO, 1);
+			break;
+		case 1:
+			init_clk_usdhc(1);
+			usdhc_cfg[1].sdhc_clk = mxc_get_clock(USDHC2_CLK_ROOT);
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+			gpio_request(USDHC2_PWR_GPIO, "usdhc2_reset");
+			gpio_direction_output(USDHC2_PWR_GPIO, 0);
+			udelay(500);
+			gpio_direction_output(USDHC2_PWR_GPIO, 1);
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers(%d) than supported by the board\n", i + 1);
+			return -EINVAL;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_POWER
+#define I2C_PMIC	0
+int power_init_board(void)
+{
+	struct pmic *p;
+	int ret;
+	unsigned int reg;
+
+	ret = power_pfuze100_init(I2C_PMIC);
+	if (ret)
+		return -ENODEV;
+
+	p = pmic_get("PFUZE100");
+	ret = pmic_probe(p);
+	if (ret)
+		return -ENODEV;
+
+	pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
+	printf("PMIC:  PFUZE100 ID=0x%02x\n", reg);
+
+	pmic_reg_read(p, PFUZE100_SW3AVOL, &reg);
+	if ((reg & 0x3f) != 0x18) {
+		reg &= ~0x3f;
+		reg |= 0x18;
+		pmic_reg_write(p, PFUZE100_SW3AVOL, reg);
+	}
+
+	ret = pfuze_mode_init(p, APS_PFM);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+#endif
+
+void spl_board_init(void)
+{
+	enable_tzc380();
+
+	/* Adjust pmic voltage to 1.0V for 800M */
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+
+	power_init_board();
+
+	/* DDR initialization */
+	spl_dram_init();
+
+	/* Serial download mode */
+	if (is_usb_boot()) {
+		puts("Back to ROM, SDP\n");
+		restore_boot_params();
+	}
+	puts("Normal Boot\n");
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	/* Just empty function now - can't decide what to choose */
+	debug("%s: %s\n", __func__, name);
+
+	return 0;
+}
+#endif
+
+void board_init_f(ulong dummy)
+{
+	/* Clear global data */
+	memset((void *)gd, 0, sizeof(gd_t));
+
+	arch_cpu_init();
+
+	init_uart_clk(0);
+
+	board_early_init_f();
+
+	timer_init();
+
+	preloader_console_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	board_init_r(NULL, 0);
+}
diff --git a/configs/mx8mq_evk_defconfig b/configs/mx8mq_evk_defconfig
new file mode 100644
index 0000000000..cee339d496
--- /dev/null
+++ b/configs/mx8mq_evk_defconfig
@@ -0,0 +1,28 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX8M=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_MX8MQ_EVK=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8mq-evk"
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_SPL=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_DM_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_THERMAL=y
+CONFIG_FS_FAT=y
diff --git a/include/configs/mx8mq_evk.h b/include/configs/mx8mq_evk.h
new file mode 100644
index 0000000000..0a70733560
--- /dev/null
+++ b/include/configs/mx8mq_evk.h
@@ -0,0 +1,265 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __IMX8M_EVK_H
+#define __IMX8M_EVK_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CSF_SIZE			0x2000 /* 8K region */
+#endif
+
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x7E1000
+#define CONFIG_SPL_MAX_SIZE		(124 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+
+#ifdef CONFIG_SPL_BUILD
+/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_STACK		0x187FF0
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_BSS_START_ADDR      0x00180000
+#define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START    0x00182000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x2000	/* 8 KB */
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#undef CONFIG_DM_MMC
+#undef CONFIG_DM_PMIC
+#undef CONFIG_DM_PMIC_PFUZE100
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#endif
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#undef CONFIG_CMD_EXPORTENV
+#undef CONFIG_CMD_IMPORTENV
+#undef CONFIG_CMD_IMLS
+
+#undef CONFIG_CMD_CRC32
+#undef CONFIG_BOOTM_NETBSD
+
+/* ENET Config */
+/* ENET1 */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_MII
+#define CONFIG_ETHPRIME                 "FEC"
+
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_XCV_TYPE             RGMII
+#define CONFIG_FEC_MXC_PHYADDR          0
+#define FEC_QUIRK_ENET_MAC
+
+#define CONFIG_PHY_GIGE
+#define IMX_FEC_BASE			0x30BE0000
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+#endif
+
+#define CONFIG_MFG_ENV_SETTINGS \
+	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+		"rdinit=/linuxrc " \
+		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+		"g_mass_storage.iSerialNumber=\"\" "\
+		"clk_ignore_unused "\
+		"\0" \
+	"initrd_addr=0x43800000\0" \
+	"initrd_high=0xffffffff\0" \
+	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	CONFIG_MFG_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=Image\0" \
+	"console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200\0" \
+	"fdt_addr=0x43000000\0"			\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"boot_fdt=try\0" \
+	"fdt_file=fsl-imx8mq-evk.dtb\0" \
+	"initrd_addr=0x43800000\0"		\
+	"initrd_high=0xffffffffffffffff\0" \
+	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
+	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"booti ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"echo WARN: Cannot load the DT; " \
+			"fi; " \
+		"else " \
+			"echo wait for boot; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console} " \
+		"root=/dev/nfs " \
+		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs;  " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${loadaddr} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"booti ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"echo WARN: Cannot load the DT; " \
+			"fi; " \
+		"else " \
+			"booti; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else booti ${loadaddr} - ${fdt_addr}; fi"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR			0x40480000
+#define CONFIG_SYS_TEXT_BASE		0x40200000
+
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE        0x80000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET               (64 * SZ_64K)
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE           0x40000000
+#define PHYS_SDRAM                      0x40000000
+#define PHYS_SDRAM_SIZE			0xC0000000 /* 3GB DDR */
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
+
+/* Monitor Command Prompt */
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT		"u-boot=> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_IMX_BOOTAUX
+
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+
+#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+#define CONFIG_FSL_QSPI    /* enable the QUADSPI driver */
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define	CONFIG_SPI_FLASH
+#define	CONFIG_SPI_FLASH_STMICRO
+#define	CONFIG_SPI_FLASH_BAR
+#define	CONFIG_SF_DEFAULT_BUS		0
+#define	CONFIG_SF_DEFAULT_CS		0
+#define	CONFIG_SF_DEFAULT_SPEED		40000000
+#define	CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+
+#define FSL_QSPI_FLASH_SIZE		(SZ_32M)
+#define FSL_QSPI_FLASH_NUM		1
+#endif
+
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_OCOTP
+#define CONFIG_CMD_FUSE
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+#define CONFIG_OF_SYSTEM_SETUP
+
+#endif
