| Message ID | 20171116092231.27740-8-maxime.ripard@free-electrons.com |
|---|---|
| State | RFC |
| Delegated to: | Tom Rini |
| Headers | show |
| Series | env: Multiple env support and env transition for sunxi | expand |
On Thu, 16 Nov 2017 10:22:28 +0100 Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > Now that we have everything in place in the code, let's allow to build > multiple environments backend through Kconfig. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > env/Kconfig | 65 > ++++++++++++++++++++++++++++++------------------------------- 1 file > changed, 32 insertions(+), 33 deletions(-) > > diff --git a/env/Kconfig b/env/Kconfig > index 8c9d800f485f..bf6eab6b4ace 100644 > --- a/env/Kconfig > +++ b/env/Kconfig > @@ -1,38 +1,18 @@ > menu "Environment" > > -choice > - prompt "Select the location of the environment" > - default ENV_IS_IN_MMC if ARCH_SUNXI > - default ENV_IS_IN_MMC if ARCH_EXYNOS4 > - default ENV_IS_IN_MMC if MX6SX || MX7D > - default ENV_IS_IN_MMC if TEGRA30 || TEGRA124 > - default ENV_IS_IN_MMC if TEGRA_ARMV8_COMMON > - default ENV_IS_IN_FLASH if ARCH_CINTEGRATOR > - default ENV_IS_IN_FLASH if ARCH_INTEGRATOR_CP > - default ENV_IS_IN_FLASH if M548x || M547x || M5282 || > MCF547x_8x > - default ENV_IS_IN_FLASH if MCF532x || MCF52x2 > - default ENV_IS_IN_FLASH if MPC86xx || MPC83xx > - default ENV_IS_IN_FLASH if ARCH_MPC8572 || ARCH_MPC8548 || > ARCH_MPC8641 > - default ENV_IS_IN_FLASH if SH && !CPU_SH4 > - default ENV_IS_IN_SPI_FLASH if ARMADA_XP > - default ENV_IS_IN_SPI_FLASH if INTEL_BAYTRAIL > - default ENV_IS_IN_SPI_FLASH if INTEL_BRASWELL > - default ENV_IS_IN_SPI_FLASH if INTEL_BROADWELL > - default ENV_IS_IN_SPI_FLASH if NORTHBRIDGE_INTEL_IVYBRIDGE > - default ENV_IS_IN_SPI_FLASH if INTEL_QUARK > - default ENV_IS_IN_SPI_FLASH if INTEL_QUEENSBAY > - default ENV_IS_IN_FAT if ARCH_BCM283X > - default ENV_IS_IN_FAT if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS > - default ENV_IS_NOWHERE > - help > - At present the environment can be stored in only one > place. Use this > - option to select the location. This is either a device > (where the > - environemnt information is simply written to a fixed > location or > - partition on the device) or a filesystem (where the > environment > - information is written to a file). > - > config ENV_IS_NOWHERE > bool "Environment is not stored" > + depends on !ENV_IS_IN_EEPROM > + depends on !ENV_IS_IN_FAT > + depends on !ENV_IS_IN_FLASH > + depends on !ENV_IS_IN_MMC > + depends on !ENV_IS_IN_NAND > + depends on !ENV_IS_IN_NVRAM > + depends on !ENV_IS_IN_ONENAND > + depends on !ENV_IS_IN_REMOTE > + depends on !ENV_IS_IN_SPI_FLASH > + depends on !ENV_IS_IN_UBI > + default y > help > Define this if you don't want to or can't have an > environment stored on a storage medium. In this case the environemnt > will still exist @@ -74,6 +54,8 @@ config ENV_IS_IN_EEPROM > config ENV_IS_IN_FAT > bool "Environment is in a FAT filesystem" > depends on !CHAIN_OF_TRUST > + default y if ARCH_BCM283X > + default y if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS > select FAT_WRITE > help > Define this if you want to use the FAT file system for the > environment. @@ -84,6 +66,13 @@ config ENV_IS_IN_FAT > config ENV_IS_IN_FLASH > bool "Environment in flash memory" > depends on !CHAIN_OF_TRUST > + default y if ARCH_CINTEGRATOR > + default y if ARCH_INTEGRATOR_CP > + default y if M548x || M547x || M5282 || MCF547x_8x > + default y if MCF532x || MCF52x2 > + default y if MPC86xx || MPC83xx > + default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641 > + default y if SH && !CPU_SH4 > help > Define this if you have a flash device which you want to > use for the environment. > @@ -156,6 +145,11 @@ config ENV_IS_IN_FLASH > config ENV_IS_IN_MMC > bool "Environment in an MMC device" > depends on !CHAIN_OF_TRUST > + default y if ARCH_SUNXI > + default y if ARCH_EXYNOS4 > + default y if MX6SX || MX7D > + default y if TEGRA30 || TEGRA124 > + default y if TEGRA_ARMV8_COMMON > help > Define this if you have an MMC device which you want to > use for the environment. > @@ -293,6 +287,13 @@ config ENV_IS_IN_REMOTE > config ENV_IS_IN_SPI_FLASH > bool "Environment is in SPI flash" > depends on !CHAIN_OF_TRUST > + default y if ARMADA_XP > + default y if INTEL_BAYTRAIL > + default y if INTEL_BRASWELL > + default y if INTEL_BROADWELL > + default y if NORTHBRIDGE_INTEL_IVYBRIDGE > + default y if INTEL_QUARK > + default y if INTEL_QUEENSBAY > help > Define this if you have a SPI Flash memory device which you > want to use for the environment. > @@ -358,8 +359,6 @@ config ENV_IS_IN_UBI > You will probably want to define these to avoid a really > noisy system when storing the env in UBI. > > -endchoice > - > config ENV_AES > bool "AES-128 encryption for stored environment (DEPRECATED)" > help Reviewed-by: Lukasz Majewski <lukma@denx.de> Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
diff --git a/env/Kconfig b/env/Kconfig index 8c9d800f485f..bf6eab6b4ace 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -1,38 +1,18 @@ menu "Environment" -choice - prompt "Select the location of the environment" - default ENV_IS_IN_MMC if ARCH_SUNXI - default ENV_IS_IN_MMC if ARCH_EXYNOS4 - default ENV_IS_IN_MMC if MX6SX || MX7D - default ENV_IS_IN_MMC if TEGRA30 || TEGRA124 - default ENV_IS_IN_MMC if TEGRA_ARMV8_COMMON - default ENV_IS_IN_FLASH if ARCH_CINTEGRATOR - default ENV_IS_IN_FLASH if ARCH_INTEGRATOR_CP - default ENV_IS_IN_FLASH if M548x || M547x || M5282 || MCF547x_8x - default ENV_IS_IN_FLASH if MCF532x || MCF52x2 - default ENV_IS_IN_FLASH if MPC86xx || MPC83xx - default ENV_IS_IN_FLASH if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641 - default ENV_IS_IN_FLASH if SH && !CPU_SH4 - default ENV_IS_IN_SPI_FLASH if ARMADA_XP - default ENV_IS_IN_SPI_FLASH if INTEL_BAYTRAIL - default ENV_IS_IN_SPI_FLASH if INTEL_BRASWELL - default ENV_IS_IN_SPI_FLASH if INTEL_BROADWELL - default ENV_IS_IN_SPI_FLASH if NORTHBRIDGE_INTEL_IVYBRIDGE - default ENV_IS_IN_SPI_FLASH if INTEL_QUARK - default ENV_IS_IN_SPI_FLASH if INTEL_QUEENSBAY - default ENV_IS_IN_FAT if ARCH_BCM283X - default ENV_IS_IN_FAT if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS - default ENV_IS_NOWHERE - help - At present the environment can be stored in only one place. Use this - option to select the location. This is either a device (where the - environemnt information is simply written to a fixed location or - partition on the device) or a filesystem (where the environment - information is written to a file). - config ENV_IS_NOWHERE bool "Environment is not stored" + depends on !ENV_IS_IN_EEPROM + depends on !ENV_IS_IN_FAT + depends on !ENV_IS_IN_FLASH + depends on !ENV_IS_IN_MMC + depends on !ENV_IS_IN_NAND + depends on !ENV_IS_IN_NVRAM + depends on !ENV_IS_IN_ONENAND + depends on !ENV_IS_IN_REMOTE + depends on !ENV_IS_IN_SPI_FLASH + depends on !ENV_IS_IN_UBI + default y help Define this if you don't want to or can't have an environment stored on a storage medium. In this case the environemnt will still exist @@ -74,6 +54,8 @@ config ENV_IS_IN_EEPROM config ENV_IS_IN_FAT bool "Environment is in a FAT filesystem" depends on !CHAIN_OF_TRUST + default y if ARCH_BCM283X + default y if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS select FAT_WRITE help Define this if you want to use the FAT file system for the environment. @@ -84,6 +66,13 @@ config ENV_IS_IN_FAT config ENV_IS_IN_FLASH bool "Environment in flash memory" depends on !CHAIN_OF_TRUST + default y if ARCH_CINTEGRATOR + default y if ARCH_INTEGRATOR_CP + default y if M548x || M547x || M5282 || MCF547x_8x + default y if MCF532x || MCF52x2 + default y if MPC86xx || MPC83xx + default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641 + default y if SH && !CPU_SH4 help Define this if you have a flash device which you want to use for the environment. @@ -156,6 +145,11 @@ config ENV_IS_IN_FLASH config ENV_IS_IN_MMC bool "Environment in an MMC device" depends on !CHAIN_OF_TRUST + default y if ARCH_SUNXI + default y if ARCH_EXYNOS4 + default y if MX6SX || MX7D + default y if TEGRA30 || TEGRA124 + default y if TEGRA_ARMV8_COMMON help Define this if you have an MMC device which you want to use for the environment. @@ -293,6 +287,13 @@ config ENV_IS_IN_REMOTE config ENV_IS_IN_SPI_FLASH bool "Environment is in SPI flash" depends on !CHAIN_OF_TRUST + default y if ARMADA_XP + default y if INTEL_BAYTRAIL + default y if INTEL_BRASWELL + default y if INTEL_BROADWELL + default y if NORTHBRIDGE_INTEL_IVYBRIDGE + default y if INTEL_QUARK + default y if INTEL_QUEENSBAY help Define this if you have a SPI Flash memory device which you want to use for the environment. @@ -358,8 +359,6 @@ config ENV_IS_IN_UBI You will probably want to define these to avoid a really noisy system when storing the env in UBI. -endchoice - config ENV_AES bool "AES-128 encryption for stored environment (DEPRECATED)" help
Now that we have everything in place in the code, let's allow to build multiple environments backend through Kconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- env/Kconfig | 65 ++++++++++++++++++++++++++++++------------------------------- 1 file changed, 32 insertions(+), 33 deletions(-)