[next,S82-V4,9/9] i40e: restore promiscuous after reset

Message ID 20171114120052.86665-9-alice.michael@intel.com
State Under Review
Delegated to: Jeff Kirsher
Headers show
Series
  • [next,S82-V4,1/9] i40evf: Do not clear MSI-X PBA manually
Related show

Commit Message

Alice Michael Nov. 14, 2017, noon
From: Alan Brady <alan.brady@intel.com>

After a reset we rebuild the VSIs which is going to clobber any
promiscuous settings we had before reset.  This makes it so that we
restore the promiscuous settings we had before reset.

Signed-off-by: Alan Brady <alan.brady@intel.com>
---
Testing-hints:
Set promiscuous mode, force a reset (ethtool -K <iface> ntuple off/on
should work), check if promiscuous traffic is still received after
reset.

v2:
- Fix whitespace on i40e_aq_str lines
- Add error message if i40e_set_promiscuous fails after reset

 drivers/net/ethernet/intel/i40e/i40e_main.c | 155 +++++++++++++++-------------
 1 file changed, 83 insertions(+), 72 deletions(-)

Comments

Bowers, AndrewX Nov. 16, 2017, 10:25 p.m. | #1
> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces@osuosl.org] On
> Behalf Of Alice Michael
> Sent: Tuesday, November 14, 2017 4:01 AM
> To: Michael, Alice <alice.michael@intel.com>; intel-wired-
> lan@lists.osuosl.org
> Subject: [Intel-wired-lan] [next PATCH S82-V4 9/9] i40e: restore promiscuous
> after reset
> 
> From: Alan Brady <alan.brady@intel.com>
> 
> After a reset we rebuild the VSIs which is going to clobber any promiscuous
> settings we had before reset.  This makes it so that we restore the
> promiscuous settings we had before reset.
> 
> Signed-off-by: Alan Brady <alan.brady@intel.com>
> ---
> Testing-hints:
> Set promiscuous mode, force a reset (ethtool -K <iface> ntuple off/on
> should work), check if promiscuous traffic is still received after reset.
> 
> v2:
> - Fix whitespace on i40e_aq_str lines
> - Add error message if i40e_set_promiscuous fails after reset
> 
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 155 +++++++++++++++-------
> ------
>  1 file changed, 83 insertions(+), 72 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

Patch

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 813f71a..906598c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2167,6 +2167,73 @@  i40e_aqc_broadcast_filter(struct i40e_vsi *vsi, const char *vsi_name,
 }
 
 /**
+ * i40e_set_promiscuous - set promiscuous mode
+ * @pf: board private structure
+ * @promisc: promisc on or off
+ *
+ * There are different ways of setting promiscuous mode on a PF depending on
+ * what state/environment we're in.  This identifies and sets it appropriately.
+ * Returns 0 on success.
+ **/
+static int i40e_set_promiscuous(struct i40e_pf *pf, bool promisc)
+{
+	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
+	struct i40e_hw *hw = &pf->hw;
+	i40e_status aq_ret;
+
+	if (vsi->type == I40E_VSI_MAIN &&
+	    pf->lan_veb != I40E_NO_VEB &&
+	    !(pf->flags & I40E_FLAG_MFP_ENABLED)) {
+		/* set defport ON for Main VSI instead of true promisc
+		 * this way we will get all unicast/multicast and VLAN
+		 * promisc behavior but will not get VF or VMDq traffic
+		 * replicated on the Main VSI.
+		 */
+		if (promisc)
+			aq_ret = i40e_aq_set_default_vsi(hw,
+							 vsi->seid,
+							 NULL);
+		else
+			aq_ret = i40e_aq_clear_default_vsi(hw,
+							   vsi->seid,
+							   NULL);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "Set default VSI failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+	} else {
+		aq_ret = i40e_aq_set_vsi_unicast_promiscuous(
+						  hw,
+						  vsi->seid,
+						  promisc, NULL,
+						  true);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "set unicast promisc failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+		aq_ret = i40e_aq_set_vsi_multicast_promiscuous(
+						  hw,
+						  vsi->seid,
+						  promisc, NULL);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "set multicast promisc failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+	}
+
+	if (!aq_ret)
+		pf->cur_promisc = promisc;
+
+	return aq_ret;
+}
+
+/**
  * i40e_sync_vsi_filters - Update the VSI filter list to the HW
  * @vsi: ptr to the VSI
  *
@@ -2467,81 +2534,16 @@  int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
 		cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) ||
 			       test_bit(__I40E_VSI_OVERFLOW_PROMISC,
 					vsi->state));
-		if ((vsi->type == I40E_VSI_MAIN) &&
-		    (pf->lan_veb != I40E_NO_VEB) &&
-		    !(pf->flags & I40E_FLAG_MFP_ENABLED)) {
-			/* set defport ON for Main VSI instead of true promisc
-			 * this way we will get all unicast/multicast and VLAN
-			 * promisc behavior but will not get VF or VMDq traffic
-			 * replicated on the Main VSI.
-			 */
-			if (pf->cur_promisc != cur_promisc) {
-				pf->cur_promisc = cur_promisc;
-				if (cur_promisc)
-					aq_ret =
-					      i40e_aq_set_default_vsi(hw,
-								      vsi->seid,
-								      NULL);
-				else
-					aq_ret =
-					    i40e_aq_clear_default_vsi(hw,
-								      vsi->seid,
-								      NULL);
-				if (aq_ret) {
-					retval = i40e_aq_rc_to_posix(aq_ret,
-							hw->aq.asq_last_status);
-					dev_info(&pf->pdev->dev,
-						 "Set default VSI failed on %s, err %s, aq_err %s\n",
-						 vsi_name,
-						 i40e_stat_str(hw, aq_ret),
-						 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-				}
-			}
-		} else {
-			aq_ret = i40e_aq_set_vsi_unicast_promiscuous(
-							  hw,
-							  vsi->seid,
-							  cur_promisc, NULL,
-							  true);
-			if (aq_ret) {
-				retval =
-				i40e_aq_rc_to_posix(aq_ret,
-						    hw->aq.asq_last_status);
-				dev_info(&pf->pdev->dev,
-					 "set unicast promisc failed on %s, err %s, aq_err %s\n",
-					 vsi_name,
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-			}
-			aq_ret = i40e_aq_set_vsi_multicast_promiscuous(
-							  hw,
-							  vsi->seid,
-							  cur_promisc, NULL);
-			if (aq_ret) {
-				retval =
-				i40e_aq_rc_to_posix(aq_ret,
-						    hw->aq.asq_last_status);
-				dev_info(&pf->pdev->dev,
-					 "set multicast promisc failed on %s, err %s, aq_err %s\n",
-					 vsi_name,
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-			}
-		}
-		aq_ret = i40e_aq_set_vsi_broadcast(&vsi->back->hw,
-						   vsi->seid,
-						   cur_promisc, NULL);
+		aq_ret = i40e_set_promiscuous(pf, cur_promisc);
 		if (aq_ret) {
 			retval = i40e_aq_rc_to_posix(aq_ret,
-						     pf->hw.aq.asq_last_status);
+						     hw->aq.asq_last_status);
 			dev_info(&pf->pdev->dev,
-				 "set brdcast promisc failed, err %s, aq_err %s\n",
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
+				 "Setting promiscuous %s failed on %s, err %s aq_err %s\n",
+				 cur_promisc ? "on" : "off",
+				 vsi_name,
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
 		}
 	}
 out:
@@ -9500,6 +9502,15 @@  static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	if (!lock_acquired)
 		rtnl_unlock();
 
+	/* Restore promiscuous settings */
+	ret = i40e_set_promiscuous(pf, pf->cur_promisc);
+	if (ret)
+		dev_warn(&pf->pdev->dev,
+			 "Failed to restore promiscuous setting: %s, err %s aq_err %s\n",
+			 pf->cur_promisc ? "on" : "off",
+			 i40e_stat_str(&pf->hw, ret),
+			 i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+
 	i40e_reset_all_vfs(pf, true);
 
 	/* tell the firmware that we're starting */