Message ID | 20171110194320.12812-1-alexandre.esse.dev@gmail.com |
---|---|
State | Accepted |
Headers | show |
Series | [1/1] gst1-imx: bump version to 0.13.0 | expand |
Hello, On Fri, 10 Nov 2017 20:43:20 +0100, Alexandre Esse wrote: > Changelog: > > ==== version 0.13.0 (2017-11-01) ==== > > * New imxv4l2videosink element > Currently only supports input physically contiguous memory blocks > as input (so, for example, no videotestsrc) > > * New Pango-based overlay elements using G2D for rendering > > * gstimxcommon library is now public > Necessary when implementing external sinks to retrieve the mapped > physical memory address from gstreamer buffers > (NOTE: ABI may change in the next few releases until this is stabilized) > > * New optional ability to use GstPhysMemory from gst-plugins-bad > > * imxv4l2videosrc: > * Fix compile prior to Gstreamer 1.3.1 > * v4l2_buffer_pool: Add special case for tw6869 driver > The tw6869 driver requires a different physical address to allow > DMA'able buffers for decreasing latency between chip and display > * v4l2src: add fractional "fps" property > (obsoletes the "fps-n" property) > * Add GstImxV4l2Meta init function > This avoids the g_assert() that was caused by the missing init > function > * Add num-additional-buffers property > This can be useful if capturing video isn't smooth; it sets the > number of internal additional buffers, so if downstream consumes > too many buffers, imxv4l2videosrc might end up doing a blocking > wait until buffers are returned > > * imxv4l2src plugin is now called imxv4l2video, because it also > contains imxv4l2videosink > Also, the v4l2 elements can be enabled/disabled in the build > configuration individually now > > * compositor: > * Only copy compositor input buffers to DMA memory once > If a single input frame is used for multiple output frames, we would > otherwise copy multiple times which can easily go to the limit of the > memory bandwidth > > * vpu: > * Handle releasing of buffers without assigned framebuffer > This can happen if the buffer is released before it was actually > used, e.g. when renegotiating at the very beginning; prevents > a crash that would otherwise occur > * Add parameter check to avoid encoder crash on flush > > * g2d: > * Add build configuration switches to explicitely specify G2D include > and library paths > * Disable cacheable memory allocation > Several issues were reported with cacheable DMA memory, so it is > turned off, at least for now > > * blitter: > * Add property to clear screen to black in blitter sinks > * Add output-rotation property to videotransform base class > > * audio: > * Fix reference counting for caps > * Mark static codec caps as may be leaked > This gets rid of the false positive in the leak tracer > > Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com> > --- > package/gstreamer1/gst1-imx/gst1-imx.hash | 2 +- > package/gstreamer1/gst1-imx/gst1-imx.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to next, thanks. Thomas
==== version 0.13.0 (2017-11-01) ==== * New imxv4l2videosink element Currently only supports input physically contiguous memory blocks as input (so, for example, no videotestsrc) * New Pango-based overlay elements using G2D for rendering * gstimxcommon library is now public Necessary when implementing external sinks to retrieve the mapped physical memory address from gstreamer buffers (NOTE: ABI may change in the next few releases until this is stabilized) * New optional ability to use GstPhysMemory from gst-plugins-bad * imxv4l2videosrc: * Fix compile prior to Gstreamer 1.3.1 * v4l2_buffer_pool: Add special case for tw6869 driver The tw6869 driver requires a different physical address to allow DMA'able buffers for decreasing latency between chip and display * v4l2src: add fractional "fps" property (obsoletes the "fps-n" property) * Add GstImxV4l2Meta init function This avoids the g_assert() that was caused by the missing init function * Add num-additional-buffers property This can be useful if capturing video isn't smooth; it sets the number of internal additional buffers, so if downstream consumes too many buffers, imxv4l2videosrc might end up doing a blocking wait until buffers are returned * imxv4l2src plugin is now called imxv4l2video, because it also contains imxv4l2videosink Also, the v4l2 elements can be enabled/disabled in the build configuration individually now * compositor: * Only copy compositor input buffers to DMA memory once If a single input frame is used for multiple output frames, we would otherwise copy multiple times which can easily go to the limit of the memory bandwidth * vpu: * Handle releasing of buffers without assigned framebuffer This can happen if the buffer is released before it was actually used, e.g. when renegotiating at the very beginning; prevents a crash that would otherwise occur * Add parameter check to avoid encoder crash on flush * g2d: * Add build configuration switches to explicitely specify G2D include and library paths * Disable cacheable memory allocation Several issues were reported with cacheable DMA memory, so it is turned off, at least for now * blitter: * Add property to clear screen to black in blitter sinks * Add output-rotation property to videotransform base class * audio: * Fix reference counting for caps * Mark static codec caps as may be leaked This gets rid of the false positive in the leak tracer Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com> --- package/gstreamer1/gst1-imx/gst1-imx.hash | 2 +- package/gstreamer1/gst1-imx/gst1-imx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/gstreamer1/gst1-imx/gst1-imx.hash b/package/gstreamer1/gst1-imx/gst1-imx.hash index e2e3971a2a..58ff4be225 100644 --- a/package/gstreamer1/gst1-imx/gst1-imx.hash +++ b/package/gstreamer1/gst1-imx/gst1-imx.hash @@ -1,2 +1,2 @@ # locally computed hash -sha256 999c093e38768e51d14abbe7836c09b666bcb89f03f34dd3697a6e5b5e4a4086 gst1-imx-0.12.3.tar.gz +sha256 3fcf1046ab8c6c7cd94218f4d2bc31ad7b5efa8a6b8f9fd5d93dc182f98ce026 gst1-imx-0.13.0.tar.gz diff --git a/package/gstreamer1/gst1-imx/gst1-imx.mk b/package/gstreamer1/gst1-imx/gst1-imx.mk index a21e2829be..c621c360f4 100644 --- a/package/gstreamer1/gst1-imx/gst1-imx.mk +++ b/package/gstreamer1/gst1-imx/gst1-imx.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_IMX_VERSION = 0.12.3 +GST1_IMX_VERSION = 0.13.0 GST1_IMX_SITE = $(call github,Freescale,gstreamer-imx,$(GST1_IMX_VERSION)) GST1_IMX_LICENSE = LGPL-2.0+