[v2,2/3] i2c: at91: split driver into core and master file

Message ID 1e9144ae3896d3cb5faa9d0fbdf8ea83db24200b.1510247114.git.me@jue.yt
State New
Headers show
Series
  • i2c: at91: slave mode support
Related show

Commit Message

Juergen Fitschen Nov. 9, 2017, 5:22 p.m.
The single file i2c-at91.c has been split into core code (i2c-at91-core.c)
and master mode specific code (i2c-at91-master.c). This should enhance
maintainability and reduce ifdeffery for slave mode related code.

The code itself hasn't been touched. Shared functions only had to be made
non-static. Furthermore, includes have been cleaned up.

Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Juergen Fitschen <me@jue.yt>
---
 MAINTAINERS                          |    3 +-
 drivers/i2c/busses/Makefile          |    1 +
 drivers/i2c/busses/i2c-at91-core.c   |  373 ++++++++++
 drivers/i2c/busses/i2c-at91-master.c |  806 ++++++++++++++++++++++
 drivers/i2c/busses/i2c-at91.c        | 1265 ----------------------------------
 drivers/i2c/busses/i2c-at91.h        |  151 ++++
 6 files changed, 1333 insertions(+), 1266 deletions(-)
 create mode 100644 drivers/i2c/busses/i2c-at91-core.c
 create mode 100644 drivers/i2c/busses/i2c-at91-master.c
 delete mode 100644 drivers/i2c/busses/i2c-at91.c
 create mode 100644 drivers/i2c/busses/i2c-at91.h

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index e021587..c15cccd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2341,7 +2341,8 @@  ATMEL I2C DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
-F:	drivers/i2c/busses/i2c-at91.c
+F:	drivers/i2c/busses/i2c-at91.h
+F:	drivers/i2c/busses/i2c-at91-*.c
 
 ATMEL ISI DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 47f3ac9..2a79c3d 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,6 +33,7 @@  obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 obj-$(CONFIG_I2C_ALTERA)	+= i2c-altera.o
 obj-$(CONFIG_I2C_ASPEED)	+= i2c-aspeed.o
 obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
+i2c-at91-objs			:= i2c-at91-core.o i2c-at91-master.o
 obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_AXXIA)		+= i2c-axxia.o
 obj-$(CONFIG_I2C_BCM2835)	+= i2c-bcm2835.o
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
new file mode 100644
index 0000000..4fed72d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -0,0 +1,373 @@ 
+/*
+ *  i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+ *
+ *  Copyright (C) 2011 Weinmann Medical GmbH
+ *  Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ *  Evolved from original work by:
+ *  Copyright (C) 2004 Rick Bronson
+ *  Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+ *
+ *  Borrowed heavily from original work by:
+ *  Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+#include "i2c-at91.h"
+
+unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
+{
+	return readl_relaxed(dev->base + reg);
+}
+
+void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
+{
+	writel_relaxed(val, dev->base + reg);
+}
+
+void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
+{
+	at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_INT_MASK);
+}
+
+void at91_twi_irq_save(struct at91_twi_dev *dev)
+{
+	dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & AT91_TWI_INT_MASK;
+	at91_disable_twi_interrupts(dev);
+}
+
+void at91_twi_irq_restore(struct at91_twi_dev *dev)
+{
+	at91_twi_write(dev, AT91_TWI_IER, dev->imr);
+}
+
+void at91_init_twi_bus(struct at91_twi_dev *dev)
+{
+	at91_disable_twi_interrupts(dev);
+	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
+
+	at91_init_twi_bus_master(dev);
+}
+
+static struct at91_twi_pdata at91rm9200_config = {
+	.clk_max_div = 5,
+	.clk_offset = 3,
+	.has_unre_flag = true,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9261_config = {
+	.clk_max_div = 5,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9260_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9g20_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9g10_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static const struct platform_device_id at91_twi_devtypes[] = {
+	{
+		.name = "i2c-at91rm9200",
+		.driver_data = (unsigned long) &at91rm9200_config,
+	}, {
+		.name = "i2c-at91sam9261",
+		.driver_data = (unsigned long) &at91sam9261_config,
+	}, {
+		.name = "i2c-at91sam9260",
+		.driver_data = (unsigned long) &at91sam9260_config,
+	}, {
+		.name = "i2c-at91sam9g20",
+		.driver_data = (unsigned long) &at91sam9g20_config,
+	}, {
+		.name = "i2c-at91sam9g10",
+		.driver_data = (unsigned long) &at91sam9g10_config,
+	}, {
+		/* sentinel */
+	}
+};
+
+#if defined(CONFIG_OF)
+static struct at91_twi_pdata at91sam9x5_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata sama5d4_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = true,
+};
+
+static struct at91_twi_pdata sama5d2_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = true,
+	.has_alt_cmd = true,
+	.has_hold_field = true,
+};
+
+static const struct of_device_id atmel_twi_dt_ids[] = {
+	{
+		.compatible = "atmel,at91rm9200-i2c",
+		.data = &at91rm9200_config,
+	} , {
+		.compatible = "atmel,at91sam9260-i2c",
+		.data = &at91sam9260_config,
+	} , {
+		.compatible = "atmel,at91sam9261-i2c",
+		.data = &at91sam9261_config,
+	} , {
+		.compatible = "atmel,at91sam9g20-i2c",
+		.data = &at91sam9g20_config,
+	} , {
+		.compatible = "atmel,at91sam9g10-i2c",
+		.data = &at91sam9g10_config,
+	}, {
+		.compatible = "atmel,at91sam9x5-i2c",
+		.data = &at91sam9x5_config,
+	}, {
+		.compatible = "atmel,sama5d4-i2c",
+		.data = &sama5d4_config,
+	}, {
+		.compatible = "atmel,sama5d2-i2c",
+		.data = &sama5d2_config,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
+#endif
+
+static struct at91_twi_pdata *at91_twi_get_driver_data(
+					struct platform_device *pdev)
+{
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
+		if (!match)
+			return NULL;
+		return (struct at91_twi_pdata *)match->data;
+	}
+	return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
+}
+
+static int at91_twi_probe(struct platform_device *pdev)
+{
+	struct at91_twi_dev *dev;
+	struct resource *mem;
+	int rc;
+	u32 phy_addr;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->dev = &pdev->dev;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -ENODEV;
+	phy_addr = mem->start;
+
+	dev->pdata = at91_twi_get_driver_data(pdev);
+	if (!dev->pdata)
+		return -ENODEV;
+
+	dev->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(dev->base))
+		return PTR_ERR(dev->base);
+
+	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq < 0)
+		return dev->irq;
+
+	platform_set_drvdata(pdev, dev);
+
+	dev->clk = devm_clk_get(dev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		dev_err(dev->dev, "no clock defined\n");
+		return -ENODEV;
+	}
+	clk_prepare_enable(dev->clk);
+
+	snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
+	i2c_set_adapdata(&dev->adapter, dev);
+	dev->adapter.owner = THIS_MODULE;
+	dev->adapter.class = I2C_CLASS_DEPRECATED;
+	dev->adapter.dev.parent = dev->dev;
+	dev->adapter.nr = pdev->id;
+	dev->adapter.timeout = AT91_I2C_TIMEOUT;
+	dev->adapter.dev.of_node = pdev->dev.of_node;
+
+	rc = at91_twi_probe_master(pdev, phy_addr, dev);
+	if (rc)
+		return rc;
+
+	at91_init_twi_bus(dev);
+
+	pm_runtime_set_autosuspend_delay(dev->dev, AUTOSUSPEND_TIMEOUT);
+	pm_runtime_use_autosuspend(dev->dev);
+	pm_runtime_set_active(dev->dev);
+	pm_runtime_enable(dev->dev);
+
+	rc = i2c_add_numbered_adapter(&dev->adapter);
+	if (rc) {
+		clk_disable_unprepare(dev->clk);
+
+		pm_runtime_disable(dev->dev);
+		pm_runtime_set_suspended(dev->dev);
+
+		return rc;
+	}
+
+	dev_info(dev->dev, "AT91 i2c bus driver (hw version: %#x).\n",
+		 at91_twi_read(dev, AT91_TWI_VER));
+	return 0;
+}
+
+static int at91_twi_remove(struct platform_device *pdev)
+{
+	struct at91_twi_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+	clk_disable_unprepare(dev->clk);
+
+	pm_runtime_disable(dev->dev);
+	pm_runtime_set_suspended(dev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int at91_twi_runtime_suspend(struct device *dev)
+{
+	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(twi_dev->clk);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int at91_twi_runtime_resume(struct device *dev)
+{
+	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+	pinctrl_pm_select_default_state(dev);
+
+	return clk_prepare_enable(twi_dev->clk);
+}
+
+static int at91_twi_suspend_noirq(struct device *dev)
+{
+	if (!pm_runtime_status_suspended(dev))
+		at91_twi_runtime_suspend(dev);
+
+	return 0;
+}
+
+static int at91_twi_resume_noirq(struct device *dev)
+{
+	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+	int ret;
+
+	if (!pm_runtime_status_suspended(dev)) {
+		ret = at91_twi_runtime_resume(dev);
+		if (ret)
+			return ret;
+	}
+
+	pm_runtime_mark_last_busy(dev);
+	pm_request_autosuspend(dev);
+
+	at91_init_twi_bus(twi_dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops at91_twi_pm = {
+	.suspend_noirq	= at91_twi_suspend_noirq,
+	.resume_noirq	= at91_twi_resume_noirq,
+	.runtime_suspend	= at91_twi_runtime_suspend,
+	.runtime_resume		= at91_twi_runtime_resume,
+};
+
+#define at91_twi_pm_ops (&at91_twi_pm)
+#else
+#define at91_twi_pm_ops NULL
+#endif
+
+static struct platform_driver at91_twi_driver = {
+	.probe		= at91_twi_probe,
+	.remove		= at91_twi_remove,
+	.id_table	= at91_twi_devtypes,
+	.driver		= {
+		.name	= "at91_i2c",
+		.of_match_table = of_match_ptr(atmel_twi_dt_ids),
+		.pm	= at91_twi_pm_ops,
+	},
+};
+
+static int __init at91_twi_init(void)
+{
+	return platform_driver_register(&at91_twi_driver);
+}
+
+static void __exit at91_twi_exit(void)
+{
+	platform_driver_unregister(&at91_twi_driver);
+}
+
+subsys_initcall(at91_twi_init);
+module_exit(at91_twi_exit);
+
+MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>");
+MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_i2c");
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
new file mode 100644
index 0000000..81a072f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -0,0 +1,806 @@ 
+/*
+ *  i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+ *
+ *  Copyright (C) 2011 Weinmann Medical GmbH
+ *  Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ *  Evolved from original work by:
+ *  Copyright (C) 2004 Rick Bronson
+ *  Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+ *
+ *  Borrowed heavily from original work by:
+ *  Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-at91.h"
+
+void at91_init_twi_bus_master(struct at91_twi_dev *dev)
+{
+	/* FIFO should be enabled immediately after the software reset */
+	if (dev->fifo_size)
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_FIFOEN);
+	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN);
+	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS);
+	at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
+}
+
+/*
+ * Calculate symmetric clock as stated in datasheet:
+ * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
+ */
+static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
+{
+	int ckdiv, cdiv, div, hold = 0;
+	struct at91_twi_pdata *pdata = dev->pdata;
+	int offset = pdata->clk_offset;
+	int max_ckdiv = pdata->clk_max_div;
+	u32 twd_hold_time_ns = 0;
+
+	div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk),
+				       2 * twi_clk) - offset);
+	ckdiv = fls(div >> 8);
+	cdiv = div >> ckdiv;
+
+	if (ckdiv > max_ckdiv) {
+		dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n",
+			 ckdiv, max_ckdiv);
+		ckdiv = max_ckdiv;
+		cdiv = 255;
+	}
+
+	if (pdata->has_hold_field) {
+		of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns",
+				     &twd_hold_time_ns);
+
+		/*
+		 * hold time = HOLD + 3 x T_peripheral_clock
+		 * Use clk rate in kHz to prevent overflows when computing
+		 * hold.
+		 */
+		hold = DIV_ROUND_UP(twd_hold_time_ns
+				    * (clk_get_rate(dev->clk) / 1000), 1000000);
+		hold -= 3;
+		if (hold < 0)
+			hold = 0;
+		if (hold > AT91_TWI_CWGR_HOLD_MAX) {
+			dev_warn(dev->dev,
+				 "HOLD field set to its maximum value (%d instead of %d)\n",
+				 AT91_TWI_CWGR_HOLD_MAX, hold);
+			hold = AT91_TWI_CWGR_HOLD_MAX;
+		}
+	}
+
+	dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv
+			    | AT91_TWI_CWGR_HOLD(hold);
+
+	dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n",
+		cdiv, ckdiv, hold, twd_hold_time_ns);
+}
+
+static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
+{
+	struct at91_twi_dma *dma = &dev->dma;
+
+	at91_twi_irq_save(dev);
+
+	if (dma->xfer_in_progress) {
+		if (dma->direction == DMA_FROM_DEVICE)
+			dmaengine_terminate_all(dma->chan_rx);
+		else
+			dmaengine_terminate_all(dma->chan_tx);
+		dma->xfer_in_progress = false;
+	}
+	if (dma->buf_mapped) {
+		dma_unmap_single(dev->dev, sg_dma_address(&dma->sg[0]),
+				 dev->buf_len, dma->direction);
+		dma->buf_mapped = false;
+	}
+
+	at91_twi_irq_restore(dev);
+}
+
+static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
+{
+	if (!dev->buf_len)
+		return;
+
+	/* 8bit write works with and without FIFO */
+	writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR);
+
+	/* send stop when last byte has been written */
+	if (--dev->buf_len == 0)
+		if (!dev->use_alt_cmd)
+			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+
+	dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
+
+	++dev->buf;
+}
+
+static void at91_twi_write_data_dma_callback(void *data)
+{
+	struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
+
+	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
+			 dev->buf_len, DMA_TO_DEVICE);
+
+	/*
+	 * When this callback is called, THR/TX FIFO is likely not to be empty
+	 * yet. So we have to wait for TXCOMP or NACK bits to be set into the
+	 * Status Register to be sure that the STOP bit has been sent and the
+	 * transfer is completed. The NACK interrupt has already been enabled,
+	 * we just have to enable TXCOMP one.
+	 */
+	at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+	if (!dev->use_alt_cmd)
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+}
+
+static void at91_twi_write_data_dma(struct at91_twi_dev *dev)
+{
+	dma_addr_t dma_addr;
+	struct dma_async_tx_descriptor *txdesc;
+	struct at91_twi_dma *dma = &dev->dma;
+	struct dma_chan *chan_tx = dma->chan_tx;
+	unsigned int sg_len = 1;
+
+	if (!dev->buf_len)
+		return;
+
+	dma->direction = DMA_TO_DEVICE;
+
+	at91_twi_irq_save(dev);
+	dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len,
+				  DMA_TO_DEVICE);
+	if (dma_mapping_error(dev->dev, dma_addr)) {
+		dev_err(dev->dev, "dma map failed\n");
+		return;
+	}
+	dma->buf_mapped = true;
+	at91_twi_irq_restore(dev);
+
+	if (dev->fifo_size) {
+		size_t part1_len, part2_len;
+		struct scatterlist *sg;
+		unsigned fifo_mr;
+
+		sg_len = 0;
+
+		part1_len = dev->buf_len & ~0x3;
+		if (part1_len) {
+			sg = &dma->sg[sg_len++];
+			sg_dma_len(sg) = part1_len;
+			sg_dma_address(sg) = dma_addr;
+		}
+
+		part2_len = dev->buf_len & 0x3;
+		if (part2_len) {
+			sg = &dma->sg[sg_len++];
+			sg_dma_len(sg) = part2_len;
+			sg_dma_address(sg) = dma_addr + part1_len;
+		}
+
+		/*
+		 * DMA controller is triggered when at least 4 data can be
+		 * written into the TX FIFO
+		 */
+		fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
+		fifo_mr &= ~AT91_TWI_FMR_TXRDYM_MASK;
+		fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_FOUR_DATA);
+		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
+	} else {
+		sg_dma_len(&dma->sg[0]) = dev->buf_len;
+		sg_dma_address(&dma->sg[0]) = dma_addr;
+	}
+
+	txdesc = dmaengine_prep_slave_sg(chan_tx, dma->sg, sg_len,
+					 DMA_MEM_TO_DEV,
+					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!txdesc) {
+		dev_err(dev->dev, "dma prep slave sg failed\n");
+		goto error;
+	}
+
+	txdesc->callback = at91_twi_write_data_dma_callback;
+	txdesc->callback_param = dev;
+
+	dma->xfer_in_progress = true;
+	dmaengine_submit(txdesc);
+	dma_async_issue_pending(chan_tx);
+
+	return;
+
+error:
+	at91_twi_dma_cleanup(dev);
+}
+
+static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
+{
+	/*
+	 * If we are in this case, it means there is garbage data in RHR, so
+	 * delete them.
+	 */
+	if (!dev->buf_len) {
+		at91_twi_read(dev, AT91_TWI_RHR);
+		return;
+	}
+
+	/* 8bit read works with and without FIFO */
+	*dev->buf = readb_relaxed(dev->base + AT91_TWI_RHR);
+	--dev->buf_len;
+
+	/* return if aborting, we only needed to read RHR to clear RXRDY*/
+	if (dev->recv_len_abort)
+		return;
+
+	/* handle I2C_SMBUS_BLOCK_DATA */
+	if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
+		/* ensure length byte is a valid value */
+		if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
+			dev->msg->flags &= ~I2C_M_RECV_LEN;
+			dev->buf_len += *dev->buf;
+			dev->msg->len = dev->buf_len + 1;
+			dev_dbg(dev->dev, "received block length %zu\n",
+					 dev->buf_len);
+		} else {
+			/* abort and send the stop by reading one more byte */
+			dev->recv_len_abort = true;
+			dev->buf_len = 1;
+		}
+	}
+
+	/* send stop if second but last byte has been read */
+	if (!dev->use_alt_cmd && dev->buf_len == 1)
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+
+	dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
+
+	++dev->buf;
+}
+
+static void at91_twi_read_data_dma_callback(void *data)
+{
+	struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
+	unsigned ier = AT91_TWI_TXCOMP;
+
+	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
+			 dev->buf_len, DMA_FROM_DEVICE);
+
+	if (!dev->use_alt_cmd) {
+		/* The last two bytes have to be read without using dma */
+		dev->buf += dev->buf_len - 2;
+		dev->buf_len = 2;
+		ier |= AT91_TWI_RXRDY;
+	}
+	at91_twi_write(dev, AT91_TWI_IER, ier);
+}
+
+static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
+{
+	dma_addr_t dma_addr;
+	struct dma_async_tx_descriptor *rxdesc;
+	struct at91_twi_dma *dma = &dev->dma;
+	struct dma_chan *chan_rx = dma->chan_rx;
+	size_t buf_len;
+
+	buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
+	dma->direction = DMA_FROM_DEVICE;
+
+	/* Keep in mind that we won't use dma to read the last two bytes */
+	at91_twi_irq_save(dev);
+	dma_addr = dma_map_single(dev->dev, dev->buf, buf_len, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dev->dev, dma_addr)) {
+		dev_err(dev->dev, "dma map failed\n");
+		return;
+	}
+	dma->buf_mapped = true;
+	at91_twi_irq_restore(dev);
+
+	if (dev->fifo_size && IS_ALIGNED(buf_len, 4)) {
+		unsigned fifo_mr;
+
+		/*
+		 * DMA controller is triggered when at least 4 data can be
+		 * read from the RX FIFO
+		 */
+		fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
+		fifo_mr &= ~AT91_TWI_FMR_RXRDYM_MASK;
+		fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_FOUR_DATA);
+		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
+	}
+
+	sg_dma_len(&dma->sg[0]) = buf_len;
+	sg_dma_address(&dma->sg[0]) = dma_addr;
+
+	rxdesc = dmaengine_prep_slave_sg(chan_rx, dma->sg, 1, DMA_DEV_TO_MEM,
+					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!rxdesc) {
+		dev_err(dev->dev, "dma prep slave sg failed\n");
+		goto error;
+	}
+
+	rxdesc->callback = at91_twi_read_data_dma_callback;
+	rxdesc->callback_param = dev;
+
+	dma->xfer_in_progress = true;
+	dmaengine_submit(rxdesc);
+	dma_async_issue_pending(dma->chan_rx);
+
+	return;
+
+error:
+	at91_twi_dma_cleanup(dev);
+}
+
+static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
+{
+	struct at91_twi_dev *dev = dev_id;
+	const unsigned status = at91_twi_read(dev, AT91_TWI_SR);
+	const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR);
+
+	if (!irqstatus)
+		return IRQ_NONE;
+	/*
+	 * In reception, the behavior of the twi device (before sama5d2) is
+	 * weird. There is some magic about RXRDY flag! When a data has been
+	 * almost received, the reception of a new one is anticipated if there
+	 * is no stop command to send. That is the reason why ask for sending
+	 * the stop command not on the last data but on the second last one.
+	 *
+	 * Unfortunately, we could still have the RXRDY flag set even if the
+	 * transfer is done and we have read the last data. It might happen
+	 * when the i2c slave device sends too quickly data after receiving the
+	 * ack from the master. The data has been almost received before having
+	 * the order to send stop. In this case, sending the stop command could
+	 * cause a RXRDY interrupt with a TXCOMP one. It is better to manage
+	 * the RXRDY interrupt first in order to not keep garbage data in the
+	 * Receive Holding Register for the next transfer.
+	 */
+	if (irqstatus & AT91_TWI_RXRDY)
+		at91_twi_read_next_byte(dev);
+
+	/*
+	 * When a NACK condition is detected, the I2C controller sets the NACK,
+	 * TXCOMP and TXRDY bits all together in the Status Register (SR).
+	 *
+	 * 1 - Handling NACK errors with CPU write transfer.
+	 *
+	 * In such case, we should not write the next byte into the Transmit
+	 * Holding Register (THR) otherwise the I2C controller would start a new
+	 * transfer and the I2C slave is likely to reply by another NACK.
+	 *
+	 * 2 - Handling NACK errors with DMA write transfer.
+	 *
+	 * By setting the TXRDY bit in the SR, the I2C controller also triggers
+	 * the DMA controller to write the next data into the THR. Then the
+	 * result depends on the hardware version of the I2C controller.
+	 *
+	 * 2a - Without support of the Alternative Command mode.
+	 *
+	 * This is the worst case: the DMA controller is triggered to write the
+	 * next data into the THR, hence starting a new transfer: the I2C slave
+	 * is likely to reply by another NACK.
+	 * Concurrently, this interrupt handler is likely to be called to manage
+	 * the first NACK before the I2C controller detects the second NACK and
+	 * sets once again the NACK bit into the SR.
+	 * When handling the first NACK, this interrupt handler disables the I2C
+	 * controller interruptions, especially the NACK interrupt.
+	 * Hence, the NACK bit is pending into the SR. This is why we should
+	 * read the SR to clear all pending interrupts at the beginning of
+	 * at91_do_twi_transfer() before actually starting a new transfer.
+	 *
+	 * 2b - With support of the Alternative Command mode.
+	 *
+	 * When a NACK condition is detected, the I2C controller also locks the
+	 * THR (and sets the LOCK bit in the SR): even though the DMA controller
+	 * is triggered by the TXRDY bit to write the next data into the THR,
+	 * this data actually won't go on the I2C bus hence a second NACK is not
+	 * generated.
+	 */
+	if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) {
+		at91_disable_twi_interrupts(dev);
+		complete(&dev->cmd_complete);
+	} else if (irqstatus & AT91_TWI_TXRDY) {
+		at91_twi_write_next_byte(dev);
+	}
+
+	/* catch error flags */
+	dev->transfer_status |= status;
+
+	return IRQ_HANDLED;
+}
+
+static int at91_do_twi_transfer(struct at91_twi_dev *dev)
+{
+	int ret;
+	unsigned long time_left;
+	bool has_unre_flag = dev->pdata->has_unre_flag;
+	bool has_alt_cmd = dev->pdata->has_alt_cmd;
+
+	/*
+	 * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
+	 * read flag but shows the state of the transmission at the time the
+	 * Status Register is read. According to the programmer datasheet,
+	 * TXCOMP is set when both holding register and internal shifter are
+	 * empty and STOP condition has been sent.
+	 * Consequently, we should enable NACK interrupt rather than TXCOMP to
+	 * detect transmission failure.
+	 * Indeed let's take the case of an i2c write command using DMA.
+	 * Whenever the slave doesn't acknowledge a byte, the LOCK, NACK and
+	 * TXCOMP bits are set together into the Status Register.
+	 * LOCK is a clear on write bit, which is set to prevent the DMA
+	 * controller from sending new data on the i2c bus after a NACK
+	 * condition has happened. Once locked, this i2c peripheral stops
+	 * triggering the DMA controller for new data but it is more than
+	 * likely that a new DMA transaction is already in progress, writing
+	 * into the Transmit Holding Register. Since the peripheral is locked,
+	 * these new data won't be sent to the i2c bus but they will remain
+	 * into the Transmit Holding Register, so TXCOMP bit is cleared.
+	 * Then when the interrupt handler is called, the Status Register is
+	 * read: the TXCOMP bit is clear but NACK bit is still set. The driver
+	 * manage the error properly, without waiting for timeout.
+	 * This case can be reproduced easyly when writing into an at24 eeprom.
+	 *
+	 * Besides, the TXCOMP bit is already set before the i2c transaction
+	 * has been started. For read transactions, this bit is cleared when
+	 * writing the START bit into the Control Register. So the
+	 * corresponding interrupt can safely be enabled just after.
+	 * However for write transactions managed by the CPU, we first write
+	 * into THR, so TXCOMP is cleared. Then we can safely enable TXCOMP
+	 * interrupt. If TXCOMP interrupt were enabled before writing into THR,
+	 * the interrupt handler would be called immediately and the i2c command
+	 * would be reported as completed.
+	 * Also when a write transaction is managed by the DMA controller,
+	 * enabling the TXCOMP interrupt in this function may lead to a race
+	 * condition since we don't know whether the TXCOMP interrupt is enabled
+	 * before or after the DMA has started to write into THR. So the TXCOMP
+	 * interrupt is enabled later by at91_twi_write_data_dma_callback().
+	 * Immediately after in that DMA callback, if the alternative command
+	 * mode is not used, we still need to send the STOP condition manually
+	 * writing the corresponding bit into the Control Register.
+	 */
+
+	dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
+		(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
+
+	reinit_completion(&dev->cmd_complete);
+	dev->transfer_status = 0;
+
+	/* Clear pending interrupts, such as NACK. */
+	at91_twi_read(dev, AT91_TWI_SR);
+
+	if (dev->fifo_size) {
+		unsigned fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
+
+		/* Reset FIFO mode register */
+		fifo_mr &= ~(AT91_TWI_FMR_TXRDYM_MASK |
+			     AT91_TWI_FMR_RXRDYM_MASK);
+		fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_ONE_DATA);
+		fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_ONE_DATA);
+		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
+
+		/* Flush FIFOs */
+		at91_twi_write(dev, AT91_TWI_CR,
+			       AT91_TWI_THRCLR | AT91_TWI_RHRCLR);
+	}
+
+	if (!dev->buf_len) {
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+		at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+	} else if (dev->msg->flags & I2C_M_RD) {
+		unsigned start_flags = AT91_TWI_START;
+
+		/* if only one byte is to be read, immediately stop transfer */
+		if (!dev->use_alt_cmd && dev->buf_len <= 1 &&
+		    !(dev->msg->flags & I2C_M_RECV_LEN))
+			start_flags |= AT91_TWI_STOP;
+		at91_twi_write(dev, AT91_TWI_CR, start_flags);
+		/*
+		 * When using dma without alternative command mode, the last
+		 * byte has to be read manually in order to not send the stop
+		 * command too late and then to receive extra data.
+		 * In practice, there are some issues if you use the dma to
+		 * read n-1 bytes because of latency.
+		 * Reading n-2 bytes with dma and the two last ones manually
+		 * seems to be the best solution.
+		 */
+		if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
+			at91_twi_read_data_dma(dev);
+		} else {
+			at91_twi_write(dev, AT91_TWI_IER,
+				       AT91_TWI_TXCOMP |
+				       AT91_TWI_NACK |
+				       AT91_TWI_RXRDY);
+		}
+	} else {
+		if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
+			at91_twi_write_data_dma(dev);
+		} else {
+			at91_twi_write_next_byte(dev);
+			at91_twi_write(dev, AT91_TWI_IER,
+				       AT91_TWI_TXCOMP |
+				       AT91_TWI_NACK |
+				       AT91_TWI_TXRDY);
+		}
+	}
+
+	time_left = wait_for_completion_timeout(&dev->cmd_complete,
+					      dev->adapter.timeout);
+	if (time_left == 0) {
+		dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
+		dev_err(dev->dev, "controller timed out\n");
+		at91_init_twi_bus(dev);
+		ret = -ETIMEDOUT;
+		goto error;
+	}
+	if (dev->transfer_status & AT91_TWI_NACK) {
+		dev_dbg(dev->dev, "received nack\n");
+		ret = -EREMOTEIO;
+		goto error;
+	}
+	if (dev->transfer_status & AT91_TWI_OVRE) {
+		dev_err(dev->dev, "overrun while reading\n");
+		ret = -EIO;
+		goto error;
+	}
+	if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) {
+		dev_err(dev->dev, "underrun while writing\n");
+		ret = -EIO;
+		goto error;
+	}
+	if ((has_alt_cmd || dev->fifo_size) &&
+	    (dev->transfer_status & AT91_TWI_LOCK)) {
+		dev_err(dev->dev, "tx locked\n");
+		ret = -EIO;
+		goto error;
+	}
+	if (dev->recv_len_abort) {
+		dev_err(dev->dev, "invalid smbus block length recvd\n");
+		ret = -EPROTO;
+		goto error;
+	}
+
+	dev_dbg(dev->dev, "transfer complete\n");
+
+	return 0;
+
+error:
+	/* first stop DMA transfer if still in progress */
+	at91_twi_dma_cleanup(dev);
+	/* then flush THR/FIFO and unlock TX if locked */
+	if ((has_alt_cmd || dev->fifo_size) &&
+	    (dev->transfer_status & AT91_TWI_LOCK)) {
+		dev_dbg(dev->dev, "unlock tx\n");
+		at91_twi_write(dev, AT91_TWI_CR,
+			       AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
+	}
+	return ret;
+}
+
+static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
+{
+	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+	int ret;
+	unsigned int_addr_flag = 0;
+	struct i2c_msg *m_start = msg;
+	bool is_read;
+
+	dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
+
+	ret = pm_runtime_get_sync(dev->dev);
+	if (ret < 0)
+		goto out;
+
+	if (num == 2) {
+		int internal_address = 0;
+		int i;
+
+		/* 1st msg is put into the internal address, start with 2nd */
+		m_start = &msg[1];
+		for (i = 0; i < msg->len; ++i) {
+			const unsigned addr = msg->buf[msg->len - 1 - i];
+
+			internal_address |= addr << (8 * i);
+			int_addr_flag += AT91_TWI_IADRSZ_1;
+		}
+		at91_twi_write(dev, AT91_TWI_IADR, internal_address);
+	}
+
+	dev->use_alt_cmd = false;
+	is_read = (m_start->flags & I2C_M_RD);
+	if (dev->pdata->has_alt_cmd) {
+		if (m_start->len > 0 &&
+		    m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) {
+			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN);
+			at91_twi_write(dev, AT91_TWI_ACR,
+				       AT91_TWI_ACR_DATAL(m_start->len) |
+				       ((is_read) ? AT91_TWI_ACR_DIR : 0));
+			dev->use_alt_cmd = true;
+		} else {
+			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS);
+		}
+	}
+
+	at91_twi_write(dev, AT91_TWI_MMR,
+		       (m_start->addr << 16) |
+		       int_addr_flag |
+		       ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
+
+	dev->buf_len = m_start->len;
+	dev->buf = m_start->buf;
+	dev->msg = m_start;
+	dev->recv_len_abort = false;
+
+	ret = at91_do_twi_transfer(dev);
+
+	ret = (ret < 0) ? ret : num;
+out:
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
+
+	return ret;
+}
+
+/*
+ * The hardware can handle at most two messages concatenated by a
+ * repeated start via it's internal address feature.
+ */
+static const struct i2c_adapter_quirks at91_twi_quirks = {
+	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
+	.max_comb_1st_msg_len = 3,
+};
+
+static u32 at91_twi_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+		| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm at91_twi_algorithm = {
+	.master_xfer	= at91_twi_xfer,
+	.functionality	= at91_twi_func,
+};
+
+static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
+{
+	int ret = 0;
+	struct dma_slave_config slave_config;
+	struct at91_twi_dma *dma = &dev->dma;
+	enum dma_slave_buswidth addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+
+	/*
+	 * The actual width of the access will be chosen in
+	 * dmaengine_prep_slave_sg():
+	 * for each buffer in the scatter-gather list, if its size is aligned
+	 * to addr_width then addr_width accesses will be performed to transfer
+	 * the buffer. On the other hand, if the buffer size is not aligned to
+	 * addr_width then the buffer is transferred using single byte accesses.
+	 * Please refer to the Atmel eXtended DMA controller driver.
+	 * When FIFOs are used, the TXRDYM threshold can always be set to
+	 * trigger the XDMAC when at least 4 data can be written into the TX
+	 * FIFO, even if single byte accesses are performed.
+	 * However the RXRDYM threshold must be set to fit the access width,
+	 * deduced from buffer length, so the XDMAC is triggered properly to
+	 * read data from the RX FIFO.
+	 */
+	if (dev->fifo_size)
+		addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	memset(&slave_config, 0, sizeof(slave_config));
+	slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
+	slave_config.src_addr_width = addr_width;
+	slave_config.src_maxburst = 1;
+	slave_config.dst_addr = (dma_addr_t)phy_addr + AT91_TWI_THR;
+	slave_config.dst_addr_width = addr_width;
+	slave_config.dst_maxburst = 1;
+	slave_config.device_fc = false;
+
+	dma->chan_tx = dma_request_slave_channel_reason(dev->dev, "tx");
+	if (IS_ERR(dma->chan_tx)) {
+		ret = PTR_ERR(dma->chan_tx);
+		dma->chan_tx = NULL;
+		goto error;
+	}
+
+	dma->chan_rx = dma_request_slave_channel_reason(dev->dev, "rx");
+	if (IS_ERR(dma->chan_rx)) {
+		ret = PTR_ERR(dma->chan_rx);
+		dma->chan_rx = NULL;
+		goto error;
+	}
+
+	slave_config.direction = DMA_MEM_TO_DEV;
+	if (dmaengine_slave_config(dma->chan_tx, &slave_config)) {
+		dev_err(dev->dev, "failed to configure tx channel\n");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	slave_config.direction = DMA_DEV_TO_MEM;
+	if (dmaengine_slave_config(dma->chan_rx, &slave_config)) {
+		dev_err(dev->dev, "failed to configure rx channel\n");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	sg_init_table(dma->sg, 2);
+	dma->buf_mapped = false;
+	dma->xfer_in_progress = false;
+	dev->use_dma = true;
+
+	dev_info(dev->dev, "using %s (tx) and %s (rx) for DMA transfers\n",
+		 dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
+
+	return ret;
+
+error:
+	if (ret != -EPROBE_DEFER)
+		dev_info(dev->dev, "can't get DMA channel, continue without DMA support\n");
+	if (dma->chan_rx)
+		dma_release_channel(dma->chan_rx);
+	if (dma->chan_tx)
+		dma_release_channel(dma->chan_tx);
+	return ret;
+}
+
+int at91_twi_probe_master(struct platform_device *pdev,
+			  u32 phy_addr, struct at91_twi_dev *dev)
+{
+	int rc;
+	u32 bus_clk_rate;
+
+	init_completion(&dev->cmd_complete);
+
+	rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0,
+			      dev_name(dev->dev), dev);
+	if (rc) {
+		dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc);
+		return rc;
+	}
+
+	if (dev->dev->of_node) {
+		rc = at91_twi_configure_dma(dev, phy_addr);
+		if (rc == -EPROBE_DEFER) {
+			clk_disable_unprepare(dev->clk);
+			return rc;
+		}
+	}
+
+	if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
+				  &dev->fifo_size)) {
+		dev_info(dev->dev, "Using FIFO (%u data)\n", dev->fifo_size);
+	}
+
+	rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
+				  &bus_clk_rate);
+	if (rc)
+		bus_clk_rate = DEFAULT_TWI_CLK_HZ;
+
+	at91_calc_twi_clock(dev, bus_clk_rate);
+
+	dev->adapter.algo = &at91_twi_algorithm;
+	dev->adapter.quirks = &at91_twi_quirks;
+
+	return 0;
+}
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
deleted file mode 100644
index af979b1..0000000
--- a/drivers/i2c/busses/i2c-at91.c
+++ /dev/null
@@ -1,1265 +0,0 @@ 
-/*
- *  i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
- *
- *  Copyright (C) 2011 Weinmann Medical GmbH
- *  Author: Nikolaus Voss <n.voss@weinmann.de>
- *
- *  Evolved from original work by:
- *  Copyright (C) 2004 Rick Bronson
- *  Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
- *
- *  Borrowed heavily from original work by:
- *  Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/platform_data/dma-atmel.h>
-#include <linux/pm_runtime.h>
-#include <linux/pinctrl/consumer.h>
-
-#define DEFAULT_TWI_CLK_HZ		100000		/* max 400 Kbits/s */
-#define AT91_I2C_TIMEOUT	msecs_to_jiffies(100)	/* transfer timeout */
-#define AT91_I2C_DMA_THRESHOLD	8			/* enable DMA if transfer size is bigger than this threshold */
-#define AUTOSUSPEND_TIMEOUT		2000
-#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE	256
-
-/* AT91 TWI register definitions */
-#define	AT91_TWI_CR		0x0000	/* Control Register */
-#define	AT91_TWI_START		BIT(0)	/* Send a Start Condition */
-#define	AT91_TWI_STOP		BIT(1)	/* Send a Stop Condition */
-#define	AT91_TWI_MSEN		BIT(2)	/* Master Transfer Enable */
-#define	AT91_TWI_MSDIS		BIT(3)	/* Master Transfer Disable */
-#define	AT91_TWI_SVEN		BIT(4)	/* Slave Transfer Enable */
-#define	AT91_TWI_SVDIS		BIT(5)	/* Slave Transfer Disable */
-#define	AT91_TWI_QUICK		BIT(6)	/* SMBus quick command */
-#define	AT91_TWI_SWRST		BIT(7)	/* Software Reset */
-#define	AT91_TWI_ACMEN		BIT(16) /* Alternative Command Mode Enable */
-#define	AT91_TWI_ACMDIS		BIT(17) /* Alternative Command Mode Disable */
-#define	AT91_TWI_THRCLR		BIT(24) /* Transmit Holding Register Clear */
-#define	AT91_TWI_RHRCLR		BIT(25) /* Receive Holding Register Clear */
-#define	AT91_TWI_LOCKCLR	BIT(26) /* Lock Clear */
-#define	AT91_TWI_FIFOEN		BIT(28) /* FIFO Enable */
-#define	AT91_TWI_FIFODIS	BIT(29) /* FIFO Disable */
-
-#define	AT91_TWI_MMR		0x0004	/* Master Mode Register */
-#define	AT91_TWI_IADRSZ_1	0x0100	/* Internal Device Address Size */
-#define	AT91_TWI_MREAD		BIT(12)	/* Master Read Direction */
-
-#define	AT91_TWI_IADR		0x000c	/* Internal Address Register */
-
-#define	AT91_TWI_CWGR		0x0010	/* Clock Waveform Generator Reg */
-#define	AT91_TWI_CWGR_HOLD_MAX	0x1f
-#define	AT91_TWI_CWGR_HOLD(x)	(((x) & AT91_TWI_CWGR_HOLD_MAX) << 24)
-
-#define	AT91_TWI_SR		0x0020	/* Status Register */
-#define	AT91_TWI_TXCOMP		BIT(0)	/* Transmission Complete */
-#define	AT91_TWI_RXRDY		BIT(1)	/* Receive Holding Register Ready */
-#define	AT91_TWI_TXRDY		BIT(2)	/* Transmit Holding Register Ready */
-#define	AT91_TWI_OVRE		BIT(6)	/* Overrun Error */
-#define	AT91_TWI_UNRE		BIT(7)	/* Underrun Error */
-#define	AT91_TWI_NACK		BIT(8)	/* Not Acknowledged */
-#define	AT91_TWI_LOCK		BIT(23) /* TWI Lock due to Frame Errors */
-
-#define	AT91_TWI_INT_MASK \
-	(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
-
-#define	AT91_TWI_IER		0x0024	/* Interrupt Enable Register */
-#define	AT91_TWI_IDR		0x0028	/* Interrupt Disable Register */
-#define	AT91_TWI_IMR		0x002c	/* Interrupt Mask Register */
-#define	AT91_TWI_RHR		0x0030	/* Receive Holding Register */
-#define	AT91_TWI_THR		0x0034	/* Transmit Holding Register */
-
-#define	AT91_TWI_ACR		0x0040	/* Alternative Command Register */
-#define	AT91_TWI_ACR_DATAL(len)	((len) & 0xff)
-#define	AT91_TWI_ACR_DIR	BIT(8)
-
-#define	AT91_TWI_FMR		0x0050	/* FIFO Mode Register */
-#define	AT91_TWI_FMR_TXRDYM(mode)	(((mode) & 0x3) << 0)
-#define	AT91_TWI_FMR_TXRDYM_MASK	(0x3 << 0)
-#define	AT91_TWI_FMR_RXRDYM(mode)	(((mode) & 0x3) << 4)
-#define	AT91_TWI_FMR_RXRDYM_MASK	(0x3 << 4)
-#define	AT91_TWI_ONE_DATA	0x0
-#define	AT91_TWI_TWO_DATA	0x1
-#define	AT91_TWI_FOUR_DATA	0x2
-
-#define	AT91_TWI_FLR		0x0054	/* FIFO Level Register */
-
-#define	AT91_TWI_FSR		0x0060	/* FIFO Status Register */
-#define	AT91_TWI_FIER		0x0064	/* FIFO Interrupt Enable Register */
-#define	AT91_TWI_FIDR		0x0068	/* FIFO Interrupt Disable Register */
-#define	AT91_TWI_FIMR		0x006c	/* FIFO Interrupt Mask Register */
-
-#define	AT91_TWI_VER		0x00fc	/* Version Register */
-
-struct at91_twi_pdata {
-	unsigned clk_max_div;
-	unsigned clk_offset;
-	bool has_unre_flag;
-	bool has_alt_cmd;
-	bool has_hold_field;
-	struct at_dma_slave dma_slave;
-};
-
-struct at91_twi_dma {
-	struct dma_chan *chan_rx;
-	struct dma_chan *chan_tx;
-	struct scatterlist sg[2];
-	struct dma_async_tx_descriptor *data_desc;
-	enum dma_data_direction direction;
-	bool buf_mapped;
-	bool xfer_in_progress;
-};
-
-struct at91_twi_dev {
-	struct device *dev;
-	void __iomem *base;
-	struct completion cmd_complete;
-	struct clk *clk;
-	u8 *buf;
-	size_t buf_len;
-	struct i2c_msg *msg;
-	int irq;
-	unsigned imr;
-	unsigned transfer_status;
-	struct i2c_adapter adapter;
-	unsigned twi_cwgr_reg;
-	struct at91_twi_pdata *pdata;
-	bool use_dma;
-	bool use_alt_cmd;
-	bool recv_len_abort;
-	u32 fifo_size;
-	struct at91_twi_dma dma;
-};
-
-static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
-{
-	return readl_relaxed(dev->base + reg);
-}
-
-static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
-{
-	writel_relaxed(val, dev->base + reg);
-}
-
-static void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
-{
-	at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_INT_MASK);
-}
-
-static void at91_twi_irq_save(struct at91_twi_dev *dev)
-{
-	dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & AT91_TWI_INT_MASK;
-	at91_disable_twi_interrupts(dev);
-}
-
-static void at91_twi_irq_restore(struct at91_twi_dev *dev)
-{
-	at91_twi_write(dev, AT91_TWI_IER, dev->imr);
-}
-
-static void at91_init_twi_bus_master(struct at91_twi_dev *dev)
-{
-	/* FIFO should be enabled immediately after the software reset */
-	if (dev->fifo_size)
-		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_FIFOEN);
-	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN);
-	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS);
-	at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
-}
-
-static void at91_init_twi_bus(struct at91_twi_dev *dev)
-{
-	at91_disable_twi_interrupts(dev);
-	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
-
-	at91_init_twi_bus_master(dev);
-}
-
-/*
- * Calculate symmetric clock as stated in datasheet:
- * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
- */
-static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
-{
-	int ckdiv, cdiv, div, hold = 0;
-	struct at91_twi_pdata *pdata = dev->pdata;
-	int offset = pdata->clk_offset;
-	int max_ckdiv = pdata->clk_max_div;
-	u32 twd_hold_time_ns = 0;
-
-	div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk),
-				       2 * twi_clk) - offset);
-	ckdiv = fls(div >> 8);
-	cdiv = div >> ckdiv;
-
-	if (ckdiv > max_ckdiv) {
-		dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n",
-			 ckdiv, max_ckdiv);
-		ckdiv = max_ckdiv;
-		cdiv = 255;
-	}
-
-	if (pdata->has_hold_field) {
-		of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns",
-				     &twd_hold_time_ns);
-
-		/*
-		 * hold time = HOLD + 3 x T_peripheral_clock
-		 * Use clk rate in kHz to prevent overflows when computing
-		 * hold.
-		 */
-		hold = DIV_ROUND_UP(twd_hold_time_ns
-				    * (clk_get_rate(dev->clk) / 1000), 1000000);
-		hold -= 3;
-		if (hold < 0)
-			hold = 0;
-		if (hold > AT91_TWI_CWGR_HOLD_MAX) {
-			dev_warn(dev->dev,
-				 "HOLD field set to its maximum value (%d instead of %d)\n",
-				 AT91_TWI_CWGR_HOLD_MAX, hold);
-			hold = AT91_TWI_CWGR_HOLD_MAX;
-		}
-	}
-
-	dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv
-			    | AT91_TWI_CWGR_HOLD(hold);
-
-	dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n",
-		cdiv, ckdiv, hold, twd_hold_time_ns);
-}
-
-static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
-{
-	struct at91_twi_dma *dma = &dev->dma;
-
-	at91_twi_irq_save(dev);
-
-	if (dma->xfer_in_progress) {
-		if (dma->direction == DMA_FROM_DEVICE)
-			dmaengine_terminate_all(dma->chan_rx);
-		else
-			dmaengine_terminate_all(dma->chan_tx);
-		dma->xfer_in_progress = false;
-	}
-	if (dma->buf_mapped) {
-		dma_unmap_single(dev->dev, sg_dma_address(&dma->sg[0]),
-				 dev->buf_len, dma->direction);
-		dma->buf_mapped = false;
-	}
-
-	at91_twi_irq_restore(dev);
-}
-
-static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
-{
-	if (!dev->buf_len)
-		return;
-
-	/* 8bit write works with and without FIFO */
-	writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR);
-
-	/* send stop when last byte has been written */
-	if (--dev->buf_len == 0)
-		if (!dev->use_alt_cmd)
-			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
-
-	dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
-
-	++dev->buf;
-}
-
-static void at91_twi_write_data_dma_callback(void *data)
-{
-	struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
-
-	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
-			 dev->buf_len, DMA_TO_DEVICE);
-
-	/*
-	 * When this callback is called, THR/TX FIFO is likely not to be empty
-	 * yet. So we have to wait for TXCOMP or NACK bits to be set into the
-	 * Status Register to be sure that the STOP bit has been sent and the
-	 * transfer is completed. The NACK interrupt has already been enabled,
-	 * we just have to enable TXCOMP one.
-	 */
-	at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
-	if (!dev->use_alt_cmd)
-		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
-}
-
-static void at91_twi_write_data_dma(struct at91_twi_dev *dev)
-{
-	dma_addr_t dma_addr;
-	struct dma_async_tx_descriptor *txdesc;
-	struct at91_twi_dma *dma = &dev->dma;
-	struct dma_chan *chan_tx = dma->chan_tx;
-	unsigned int sg_len = 1;
-
-	if (!dev->buf_len)
-		return;
-
-	dma->direction = DMA_TO_DEVICE;
-
-	at91_twi_irq_save(dev);
-	dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len,
-				  DMA_TO_DEVICE);
-	if (dma_mapping_error(dev->dev, dma_addr)) {
-		dev_err(dev->dev, "dma map failed\n");
-		return;
-	}
-	dma->buf_mapped = true;
-	at91_twi_irq_restore(dev);
-
-	if (dev->fifo_size) {
-		size_t part1_len, part2_len;
-		struct scatterlist *sg;
-		unsigned fifo_mr;
-
-		sg_len = 0;
-
-		part1_len = dev->buf_len & ~0x3;
-		if (part1_len) {
-			sg = &dma->sg[sg_len++];
-			sg_dma_len(sg) = part1_len;
-			sg_dma_address(sg) = dma_addr;
-		}
-
-		part2_len = dev->buf_len & 0x3;
-		if (part2_len) {
-			sg = &dma->sg[sg_len++];
-			sg_dma_len(sg) = part2_len;
-			sg_dma_address(sg) = dma_addr + part1_len;
-		}
-
-		/*
-		 * DMA controller is triggered when at least 4 data can be
-		 * written into the TX FIFO
-		 */
-		fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
-		fifo_mr &= ~AT91_TWI_FMR_TXRDYM_MASK;
-		fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_FOUR_DATA);
-		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
-	} else {
-		sg_dma_len(&dma->sg[0]) = dev->buf_len;
-		sg_dma_address(&dma->sg[0]) = dma_addr;
-	}
-
-	txdesc = dmaengine_prep_slave_sg(chan_tx, dma->sg, sg_len,
-					 DMA_MEM_TO_DEV,
-					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!txdesc) {
-		dev_err(dev->dev, "dma prep slave sg failed\n");
-		goto error;
-	}
-
-	txdesc->callback = at91_twi_write_data_dma_callback;
-	txdesc->callback_param = dev;
-
-	dma->xfer_in_progress = true;
-	dmaengine_submit(txdesc);
-	dma_async_issue_pending(chan_tx);
-
-	return;
-
-error:
-	at91_twi_dma_cleanup(dev);
-}
-
-static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
-{
-	/*
-	 * If we are in this case, it means there is garbage data in RHR, so
-	 * delete them.
-	 */
-	if (!dev->buf_len) {
-		at91_twi_read(dev, AT91_TWI_RHR);
-		return;
-	}
-
-	/* 8bit read works with and without FIFO */
-	*dev->buf = readb_relaxed(dev->base + AT91_TWI_RHR);
-	--dev->buf_len;
-
-	/* return if aborting, we only needed to read RHR to clear RXRDY*/
-	if (dev->recv_len_abort)
-		return;
-
-	/* handle I2C_SMBUS_BLOCK_DATA */
-	if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
-		/* ensure length byte is a valid value */
-		if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
-			dev->msg->flags &= ~I2C_M_RECV_LEN;
-			dev->buf_len += *dev->buf;
-			dev->msg->len = dev->buf_len + 1;
-			dev_dbg(dev->dev, "received block length %zu\n",
-					 dev->buf_len);
-		} else {
-			/* abort and send the stop by reading one more byte */
-			dev->recv_len_abort = true;
-			dev->buf_len = 1;
-		}
-	}
-
-	/* send stop if second but last byte has been read */
-	if (!dev->use_alt_cmd && dev->buf_len == 1)
-		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
-
-	dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
-
-	++dev->buf;
-}
-
-static void at91_twi_read_data_dma_callback(void *data)
-{
-	struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
-	unsigned ier = AT91_TWI_TXCOMP;
-
-	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
-			 dev->buf_len, DMA_FROM_DEVICE);
-
-	if (!dev->use_alt_cmd) {
-		/* The last two bytes have to be read without using dma */
-		dev->buf += dev->buf_len - 2;
-		dev->buf_len = 2;
-		ier |= AT91_TWI_RXRDY;
-	}
-	at91_twi_write(dev, AT91_TWI_IER, ier);
-}
-
-static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
-{
-	dma_addr_t dma_addr;
-	struct dma_async_tx_descriptor *rxdesc;
-	struct at91_twi_dma *dma = &dev->dma;
-	struct dma_chan *chan_rx = dma->chan_rx;
-	size_t buf_len;
-
-	buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
-	dma->direction = DMA_FROM_DEVICE;
-
-	/* Keep in mind that we won't use dma to read the last two bytes */
-	at91_twi_irq_save(dev);
-	dma_addr = dma_map_single(dev->dev, dev->buf, buf_len, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dev->dev, dma_addr)) {
-		dev_err(dev->dev, "dma map failed\n");
-		return;
-	}
-	dma->buf_mapped = true;
-	at91_twi_irq_restore(dev);
-
-	if (dev->fifo_size && IS_ALIGNED(buf_len, 4)) {
-		unsigned fifo_mr;
-
-		/*
-		 * DMA controller is triggered when at least 4 data can be
-		 * read from the RX FIFO
-		 */
-		fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
-		fifo_mr &= ~AT91_TWI_FMR_RXRDYM_MASK;
-		fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_FOUR_DATA);
-		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
-	}
-
-	sg_dma_len(&dma->sg[0]) = buf_len;
-	sg_dma_address(&dma->sg[0]) = dma_addr;
-
-	rxdesc = dmaengine_prep_slave_sg(chan_rx, dma->sg, 1, DMA_DEV_TO_MEM,
-					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!rxdesc) {
-		dev_err(dev->dev, "dma prep slave sg failed\n");
-		goto error;
-	}
-
-	rxdesc->callback = at91_twi_read_data_dma_callback;
-	rxdesc->callback_param = dev;
-
-	dma->xfer_in_progress = true;
-	dmaengine_submit(rxdesc);
-	dma_async_issue_pending(dma->chan_rx);
-
-	return;
-
-error:
-	at91_twi_dma_cleanup(dev);
-}
-
-static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
-{
-	struct at91_twi_dev *dev = dev_id;
-	const unsigned status = at91_twi_read(dev, AT91_TWI_SR);
-	const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR);
-
-	if (!irqstatus)
-		return IRQ_NONE;
-	/*
-	 * In reception, the behavior of the twi device (before sama5d2) is
-	 * weird. There is some magic about RXRDY flag! When a data has been
-	 * almost received, the reception of a new one is anticipated if there
-	 * is no stop command to send. That is the reason why ask for sending
-	 * the stop command not on the last data but on the second last one.
-	 *
-	 * Unfortunately, we could still have the RXRDY flag set even if the
-	 * transfer is done and we have read the last data. It might happen
-	 * when the i2c slave device sends too quickly data after receiving the
-	 * ack from the master. The data has been almost received before having
-	 * the order to send stop. In this case, sending the stop command could
-	 * cause a RXRDY interrupt with a TXCOMP one. It is better to manage
-	 * the RXRDY interrupt first in order to not keep garbage data in the
-	 * Receive Holding Register for the next transfer.
-	 */
-	if (irqstatus & AT91_TWI_RXRDY)
-		at91_twi_read_next_byte(dev);
-
-	/*
-	 * When a NACK condition is detected, the I2C controller sets the NACK,
-	 * TXCOMP and TXRDY bits all together in the Status Register (SR).
-	 *
-	 * 1 - Handling NACK errors with CPU write transfer.
-	 *
-	 * In such case, we should not write the next byte into the Transmit
-	 * Holding Register (THR) otherwise the I2C controller would start a new
-	 * transfer and the I2C slave is likely to reply by another NACK.
-	 *
-	 * 2 - Handling NACK errors with DMA write transfer.
-	 *
-	 * By setting the TXRDY bit in the SR, the I2C controller also triggers
-	 * the DMA controller to write the next data into the THR. Then the
-	 * result depends on the hardware version of the I2C controller.
-	 *
-	 * 2a - Without support of the Alternative Command mode.
-	 *
-	 * This is the worst case: the DMA controller is triggered to write the
-	 * next data into the THR, hence starting a new transfer: the I2C slave
-	 * is likely to reply by another NACK.
-	 * Concurrently, this interrupt handler is likely to be called to manage
-	 * the first NACK before the I2C controller detects the second NACK and
-	 * sets once again the NACK bit into the SR.
-	 * When handling the first NACK, this interrupt handler disables the I2C
-	 * controller interruptions, especially the NACK interrupt.
-	 * Hence, the NACK bit is pending into the SR. This is why we should
-	 * read the SR to clear all pending interrupts at the beginning of
-	 * at91_do_twi_transfer() before actually starting a new transfer.
-	 *
-	 * 2b - With support of the Alternative Command mode.
-	 *
-	 * When a NACK condition is detected, the I2C controller also locks the
-	 * THR (and sets the LOCK bit in the SR): even though the DMA controller
-	 * is triggered by the TXRDY bit to write the next data into the THR,
-	 * this data actually won't go on the I2C bus hence a second NACK is not
-	 * generated.
-	 */
-	if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) {
-		at91_disable_twi_interrupts(dev);
-		complete(&dev->cmd_complete);
-	} else if (irqstatus & AT91_TWI_TXRDY) {
-		at91_twi_write_next_byte(dev);
-	}
-
-	/* catch error flags */
-	dev->transfer_status |= status;
-
-	return IRQ_HANDLED;
-}
-
-static int at91_do_twi_transfer(struct at91_twi_dev *dev)
-{
-	int ret;
-	unsigned long time_left;
-	bool has_unre_flag = dev->pdata->has_unre_flag;
-	bool has_alt_cmd = dev->pdata->has_alt_cmd;
-
-	/*
-	 * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
-	 * read flag but shows the state of the transmission at the time the
-	 * Status Register is read. According to the programmer datasheet,
-	 * TXCOMP is set when both holding register and internal shifter are
-	 * empty and STOP condition has been sent.
-	 * Consequently, we should enable NACK interrupt rather than TXCOMP to
-	 * detect transmission failure.
-	 * Indeed let's take the case of an i2c write command using DMA.
-	 * Whenever the slave doesn't acknowledge a byte, the LOCK, NACK and
-	 * TXCOMP bits are set together into the Status Register.
-	 * LOCK is a clear on write bit, which is set to prevent the DMA
-	 * controller from sending new data on the i2c bus after a NACK
-	 * condition has happened. Once locked, this i2c peripheral stops
-	 * triggering the DMA controller for new data but it is more than
-	 * likely that a new DMA transaction is already in progress, writing
-	 * into the Transmit Holding Register. Since the peripheral is locked,
-	 * these new data won't be sent to the i2c bus but they will remain
-	 * into the Transmit Holding Register, so TXCOMP bit is cleared.
-	 * Then when the interrupt handler is called, the Status Register is
-	 * read: the TXCOMP bit is clear but NACK bit is still set. The driver
-	 * manage the error properly, without waiting for timeout.
-	 * This case can be reproduced easyly when writing into an at24 eeprom.
-	 *
-	 * Besides, the TXCOMP bit is already set before the i2c transaction
-	 * has been started. For read transactions, this bit is cleared when
-	 * writing the START bit into the Control Register. So the
-	 * corresponding interrupt can safely be enabled just after.
-	 * However for write transactions managed by the CPU, we first write
-	 * into THR, so TXCOMP is cleared. Then we can safely enable TXCOMP
-	 * interrupt. If TXCOMP interrupt were enabled before writing into THR,
-	 * the interrupt handler would be called immediately and the i2c command
-	 * would be reported as completed.
-	 * Also when a write transaction is managed by the DMA controller,
-	 * enabling the TXCOMP interrupt in this function may lead to a race
-	 * condition since we don't know whether the TXCOMP interrupt is enabled
-	 * before or after the DMA has started to write into THR. So the TXCOMP
-	 * interrupt is enabled later by at91_twi_write_data_dma_callback().
-	 * Immediately after in that DMA callback, if the alternative command
-	 * mode is not used, we still need to send the STOP condition manually
-	 * writing the corresponding bit into the Control Register.
-	 */
-
-	dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
-		(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
-
-	reinit_completion(&dev->cmd_complete);
-	dev->transfer_status = 0;
-
-	/* Clear pending interrupts, such as NACK. */
-	at91_twi_read(dev, AT91_TWI_SR);
-
-	if (dev->fifo_size) {
-		unsigned fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
-
-		/* Reset FIFO mode register */
-		fifo_mr &= ~(AT91_TWI_FMR_TXRDYM_MASK |
-			     AT91_TWI_FMR_RXRDYM_MASK);
-		fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_ONE_DATA);
-		fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_ONE_DATA);
-		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
-
-		/* Flush FIFOs */
-		at91_twi_write(dev, AT91_TWI_CR,
-			       AT91_TWI_THRCLR | AT91_TWI_RHRCLR);
-	}
-
-	if (!dev->buf_len) {
-		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
-		at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
-	} else if (dev->msg->flags & I2C_M_RD) {
-		unsigned start_flags = AT91_TWI_START;
-
-		/* if only one byte is to be read, immediately stop transfer */
-		if (!dev->use_alt_cmd && dev->buf_len <= 1 &&
-		    !(dev->msg->flags & I2C_M_RECV_LEN))
-			start_flags |= AT91_TWI_STOP;
-		at91_twi_write(dev, AT91_TWI_CR, start_flags);
-		/*
-		 * When using dma without alternative command mode, the last
-		 * byte has to be read manually in order to not send the stop
-		 * command too late and then to receive extra data.
-		 * In practice, there are some issues if you use the dma to
-		 * read n-1 bytes because of latency.
-		 * Reading n-2 bytes with dma and the two last ones manually
-		 * seems to be the best solution.
-		 */
-		if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
-			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
-			at91_twi_read_data_dma(dev);
-		} else {
-			at91_twi_write(dev, AT91_TWI_IER,
-				       AT91_TWI_TXCOMP |
-				       AT91_TWI_NACK |
-				       AT91_TWI_RXRDY);
-		}
-	} else {
-		if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
-			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
-			at91_twi_write_data_dma(dev);
-		} else {
-			at91_twi_write_next_byte(dev);
-			at91_twi_write(dev, AT91_TWI_IER,
-				       AT91_TWI_TXCOMP |
-				       AT91_TWI_NACK |
-				       AT91_TWI_TXRDY);
-		}
-	}
-
-	time_left = wait_for_completion_timeout(&dev->cmd_complete,
-					      dev->adapter.timeout);
-	if (time_left == 0) {
-		dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
-		dev_err(dev->dev, "controller timed out\n");
-		at91_init_twi_bus(dev);
-		ret = -ETIMEDOUT;
-		goto error;
-	}
-	if (dev->transfer_status & AT91_TWI_NACK) {
-		dev_dbg(dev->dev, "received nack\n");
-		ret = -EREMOTEIO;
-		goto error;
-	}
-	if (dev->transfer_status & AT91_TWI_OVRE) {
-		dev_err(dev->dev, "overrun while reading\n");
-		ret = -EIO;
-		goto error;
-	}
-	if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) {
-		dev_err(dev->dev, "underrun while writing\n");
-		ret = -EIO;
-		goto error;
-	}
-	if ((has_alt_cmd || dev->fifo_size) &&
-	    (dev->transfer_status & AT91_TWI_LOCK)) {
-		dev_err(dev->dev, "tx locked\n");
-		ret = -EIO;
-		goto error;
-	}
-	if (dev->recv_len_abort) {
-		dev_err(dev->dev, "invalid smbus block length recvd\n");
-		ret = -EPROTO;
-		goto error;
-	}
-
-	dev_dbg(dev->dev, "transfer complete\n");
-
-	return 0;
-
-error:
-	/* first stop DMA transfer if still in progress */
-	at91_twi_dma_cleanup(dev);
-	/* then flush THR/FIFO and unlock TX if locked */
-	if ((has_alt_cmd || dev->fifo_size) &&
-	    (dev->transfer_status & AT91_TWI_LOCK)) {
-		dev_dbg(dev->dev, "unlock tx\n");
-		at91_twi_write(dev, AT91_TWI_CR,
-			       AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
-	}
-	return ret;
-}
-
-static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
-{
-	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
-	int ret;
-	unsigned int_addr_flag = 0;
-	struct i2c_msg *m_start = msg;
-	bool is_read;
-
-	dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
-
-	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
-		goto out;
-
-	if (num == 2) {
-		int internal_address = 0;
-		int i;
-
-		/* 1st msg is put into the internal address, start with 2nd */
-		m_start = &msg[1];
-		for (i = 0; i < msg->len; ++i) {
-			const unsigned addr = msg->buf[msg->len - 1 - i];
-
-			internal_address |= addr << (8 * i);
-			int_addr_flag += AT91_TWI_IADRSZ_1;
-		}
-		at91_twi_write(dev, AT91_TWI_IADR, internal_address);
-	}
-
-	dev->use_alt_cmd = false;
-	is_read = (m_start->flags & I2C_M_RD);
-	if (dev->pdata->has_alt_cmd) {
-		if (m_start->len > 0 &&
-		    m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) {
-			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN);
-			at91_twi_write(dev, AT91_TWI_ACR,
-				       AT91_TWI_ACR_DATAL(m_start->len) |
-				       ((is_read) ? AT91_TWI_ACR_DIR : 0));
-			dev->use_alt_cmd = true;
-		} else {
-			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS);
-		}
-	}
-
-	at91_twi_write(dev, AT91_TWI_MMR,
-		       (m_start->addr << 16) |
-		       int_addr_flag |
-		       ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
-
-	dev->buf_len = m_start->len;
-	dev->buf = m_start->buf;
-	dev->msg = m_start;
-	dev->recv_len_abort = false;
-
-	ret = at91_do_twi_transfer(dev);
-
-	ret = (ret < 0) ? ret : num;
-out:
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
-
-	return ret;
-}
-
-/*
- * The hardware can handle at most two messages concatenated by a
- * repeated start via it's internal address feature.
- */
-static const struct i2c_adapter_quirks at91_twi_quirks = {
-	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
-	.max_comb_1st_msg_len = 3,
-};
-
-static u32 at91_twi_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
-		| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
-}
-
-static const struct i2c_algorithm at91_twi_algorithm = {
-	.master_xfer	= at91_twi_xfer,
-	.functionality	= at91_twi_func,
-};
-
-static struct at91_twi_pdata at91rm9200_config = {
-	.clk_max_div = 5,
-	.clk_offset = 3,
-	.has_unre_flag = true,
-	.has_alt_cmd = false,
-	.has_hold_field = false,
-};
-
-static struct at91_twi_pdata at91sam9261_config = {
-	.clk_max_div = 5,
-	.clk_offset = 4,
-	.has_unre_flag = false,
-	.has_alt_cmd = false,
-	.has_hold_field = false,
-};
-
-static struct at91_twi_pdata at91sam9260_config = {
-	.clk_max_div = 7,
-	.clk_offset = 4,
-	.has_unre_flag = false,
-	.has_alt_cmd = false,
-	.has_hold_field = false,
-};
-
-static struct at91_twi_pdata at91sam9g20_config = {
-	.clk_max_div = 7,
-	.clk_offset = 4,
-	.has_unre_flag = false,
-	.has_alt_cmd = false,
-	.has_hold_field = false,
-};
-
-static struct at91_twi_pdata at91sam9g10_config = {
-	.clk_max_div = 7,
-	.clk_offset = 4,
-	.has_unre_flag = false,
-	.has_alt_cmd = false,
-	.has_hold_field = false,
-};
-
-static const struct platform_device_id at91_twi_devtypes[] = {
-	{
-		.name = "i2c-at91rm9200",
-		.driver_data = (unsigned long) &at91rm9200_config,
-	}, {
-		.name = "i2c-at91sam9261",
-		.driver_data = (unsigned long) &at91sam9261_config,
-	}, {
-		.name = "i2c-at91sam9260",
-		.driver_data = (unsigned long) &at91sam9260_config,
-	}, {
-		.name = "i2c-at91sam9g20",
-		.driver_data = (unsigned long) &at91sam9g20_config,
-	}, {
-		.name = "i2c-at91sam9g10",
-		.driver_data = (unsigned long) &at91sam9g10_config,
-	}, {
-		/* sentinel */
-	}
-};
-
-#if defined(CONFIG_OF)
-static struct at91_twi_pdata at91sam9x5_config = {
-	.clk_max_div = 7,
-	.clk_offset = 4,
-	.has_unre_flag = false,
-	.has_alt_cmd = false,
-	.has_hold_field = false,
-};
-
-static struct at91_twi_pdata sama5d4_config = {
-	.clk_max_div = 7,
-	.clk_offset = 4,
-	.has_unre_flag = false,
-	.has_alt_cmd = false,
-	.has_hold_field = true,
-};
-
-static struct at91_twi_pdata sama5d2_config = {
-	.clk_max_div = 7,
-	.clk_offset = 4,
-	.has_unre_flag = true,
-	.has_alt_cmd = true,
-	.has_hold_field = true,
-};
-
-static const struct of_device_id atmel_twi_dt_ids[] = {
-	{
-		.compatible = "atmel,at91rm9200-i2c",
-		.data = &at91rm9200_config,
-	} , {
-		.compatible = "atmel,at91sam9260-i2c",
-		.data = &at91sam9260_config,
-	} , {
-		.compatible = "atmel,at91sam9261-i2c",
-		.data = &at91sam9261_config,
-	} , {
-		.compatible = "atmel,at91sam9g20-i2c",
-		.data = &at91sam9g20_config,
-	} , {
-		.compatible = "atmel,at91sam9g10-i2c",
-		.data = &at91sam9g10_config,
-	}, {
-		.compatible = "atmel,at91sam9x5-i2c",
-		.data = &at91sam9x5_config,
-	}, {
-		.compatible = "atmel,sama5d4-i2c",
-		.data = &sama5d4_config,
-	}, {
-		.compatible = "atmel,sama5d2-i2c",
-		.data = &sama5d2_config,
-	}, {
-		/* sentinel */
-	}
-};
-MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
-#endif
-
-static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
-{
-	int ret = 0;
-	struct dma_slave_config slave_config;
-	struct at91_twi_dma *dma = &dev->dma;
-	enum dma_slave_buswidth addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-
-	/*
-	 * The actual width of the access will be chosen in
-	 * dmaengine_prep_slave_sg():
-	 * for each buffer in the scatter-gather list, if its size is aligned
-	 * to addr_width then addr_width accesses will be performed to transfer
-	 * the buffer. On the other hand, if the buffer size is not aligned to
-	 * addr_width then the buffer is transferred using single byte accesses.
-	 * Please refer to the Atmel eXtended DMA controller driver.
-	 * When FIFOs are used, the TXRDYM threshold can always be set to
-	 * trigger the XDMAC when at least 4 data can be written into the TX
-	 * FIFO, even if single byte accesses are performed.
-	 * However the RXRDYM threshold must be set to fit the access width,
-	 * deduced from buffer length, so the XDMAC is triggered properly to
-	 * read data from the RX FIFO.
-	 */
-	if (dev->fifo_size)
-		addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-
-	memset(&slave_config, 0, sizeof(slave_config));
-	slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
-	slave_config.src_addr_width = addr_width;
-	slave_config.src_maxburst = 1;
-	slave_config.dst_addr = (dma_addr_t)phy_addr + AT91_TWI_THR;
-	slave_config.dst_addr_width = addr_width;
-	slave_config.dst_maxburst = 1;
-	slave_config.device_fc = false;
-
-	dma->chan_tx = dma_request_slave_channel_reason(dev->dev, "tx");
-	if (IS_ERR(dma->chan_tx)) {
-		ret = PTR_ERR(dma->chan_tx);
-		dma->chan_tx = NULL;
-		goto error;
-	}
-
-	dma->chan_rx = dma_request_slave_channel_reason(dev->dev, "rx");
-	if (IS_ERR(dma->chan_rx)) {
-		ret = PTR_ERR(dma->chan_rx);
-		dma->chan_rx = NULL;
-		goto error;
-	}
-
-	slave_config.direction = DMA_MEM_TO_DEV;
-	if (dmaengine_slave_config(dma->chan_tx, &slave_config)) {
-		dev_err(dev->dev, "failed to configure tx channel\n");
-		ret = -EINVAL;
-		goto error;
-	}
-
-	slave_config.direction = DMA_DEV_TO_MEM;
-	if (dmaengine_slave_config(dma->chan_rx, &slave_config)) {
-		dev_err(dev->dev, "failed to configure rx channel\n");
-		ret = -EINVAL;
-		goto error;
-	}
-
-	sg_init_table(dma->sg, 2);
-	dma->buf_mapped = false;
-	dma->xfer_in_progress = false;
-	dev->use_dma = true;
-
-	dev_info(dev->dev, "using %s (tx) and %s (rx) for DMA transfers\n",
-		 dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
-
-	return ret;
-
-error:
-	if (ret != -EPROBE_DEFER)
-		dev_info(dev->dev, "can't get DMA channel, continue without DMA support\n");
-	if (dma->chan_rx)
-		dma_release_channel(dma->chan_rx);
-	if (dma->chan_tx)
-		dma_release_channel(dma->chan_tx);
-	return ret;
-}
-
-static struct at91_twi_pdata *at91_twi_get_driver_data(
-					struct platform_device *pdev)
-{
-	if (pdev->dev.of_node) {
-		const struct of_device_id *match;
-		match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
-		if (!match)
-			return NULL;
-		return (struct at91_twi_pdata *)match->data;
-	}
-	return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
-}
-
-static int at91_twi_probe_master(struct platform_device *pdev,
-				 u32 phy_addr, struct at91_twi_dev *dev)
-{
-	int rc;
-	u32 bus_clk_rate;
-
-	init_completion(&dev->cmd_complete);
-
-	rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0,
-			      dev_name(dev->dev), dev);
-	if (rc) {
-		dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc);
-		return rc;
-	}
-
-	if (dev->dev->of_node) {
-		rc = at91_twi_configure_dma(dev, phy_addr);
-		if (rc == -EPROBE_DEFER) {
-			clk_disable_unprepare(dev->clk);
-			return rc;
-		}
-	}
-
-	if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
-				  &dev->fifo_size)) {
-		dev_info(dev->dev, "Using FIFO (%u data)\n", dev->fifo_size);
-	}
-
-	rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
-				  &bus_clk_rate);
-	if (rc)
-		bus_clk_rate = DEFAULT_TWI_CLK_HZ;
-
-	at91_calc_twi_clock(dev, bus_clk_rate);
-
-	dev->adapter.algo = &at91_twi_algorithm;
-	dev->adapter.quirks = &at91_twi_quirks;
-
-	return 0;
-}
-
-static int at91_twi_probe(struct platform_device *pdev)
-{
-	struct at91_twi_dev *dev;
-	struct resource *mem;
-	int rc;
-	u32 phy_addr;
-
-	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->dev = &pdev->dev;
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem)
-		return -ENODEV;
-	phy_addr = mem->start;
-
-	dev->pdata = at91_twi_get_driver_data(pdev);
-	if (!dev->pdata)
-		return -ENODEV;
-
-	dev->base = devm_ioremap_resource(&pdev->dev, mem);
-	if (IS_ERR(dev->base))
-		return PTR_ERR(dev->base);
-
-	dev->irq = platform_get_irq(pdev, 0);
-	if (dev->irq < 0)
-		return dev->irq;
-
-	platform_set_drvdata(pdev, dev);
-
-	dev->clk = devm_clk_get(dev->dev, NULL);
-	if (IS_ERR(dev->clk)) {
-		dev_err(dev->dev, "no clock defined\n");
-		return -ENODEV;
-	}
-	rc = clk_prepare_enable(dev->clk);
-	if (rc)
-		return rc;
-
-	snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
-	i2c_set_adapdata(&dev->adapter, dev);
-	dev->adapter.owner = THIS_MODULE;
-	dev->adapter.class = I2C_CLASS_DEPRECATED;
-	dev->adapter.dev.parent = dev->dev;
-	dev->adapter.nr = pdev->id;
-	dev->adapter.timeout = AT91_I2C_TIMEOUT;
-	dev->adapter.dev.of_node = pdev->dev.of_node;
-
-	rc = at91_twi_probe_master(pdev, phy_addr, dev);
-	if (rc)
-		return rc;
-
-	at91_init_twi_bus(dev);
-
-	pm_runtime_set_autosuspend_delay(dev->dev, AUTOSUSPEND_TIMEOUT);
-	pm_runtime_use_autosuspend(dev->dev);
-	pm_runtime_set_active(dev->dev);
-	pm_runtime_enable(dev->dev);
-
-	rc = i2c_add_numbered_adapter(&dev->adapter);
-	if (rc) {
-		clk_disable_unprepare(dev->clk);
-
-		pm_runtime_disable(dev->dev);
-		pm_runtime_set_suspended(dev->dev);
-
-		return rc;
-	}
-
-	dev_info(dev->dev, "AT91 i2c bus driver (hw version: %#x).\n",
-		 at91_twi_read(dev, AT91_TWI_VER));
-	return 0;
-}
-
-static int at91_twi_remove(struct platform_device *pdev)
-{
-	struct at91_twi_dev *dev = platform_get_drvdata(pdev);
-
-	i2c_del_adapter(&dev->adapter);
-	clk_disable_unprepare(dev->clk);
-
-	pm_runtime_disable(dev->dev);
-	pm_runtime_set_suspended(dev->dev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-
-static int at91_twi_runtime_suspend(struct device *dev)
-{
-	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
-
-	clk_disable_unprepare(twi_dev->clk);
-
-	pinctrl_pm_select_sleep_state(dev);
-
-	return 0;
-}
-
-static int at91_twi_runtime_resume(struct device *dev)
-{
-	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
-
-	pinctrl_pm_select_default_state(dev);
-
-	return clk_prepare_enable(twi_dev->clk);
-}
-
-static int at91_twi_suspend_noirq(struct device *dev)
-{
-	if (!pm_runtime_status_suspended(dev))
-		at91_twi_runtime_suspend(dev);
-
-	return 0;
-}
-
-static int at91_twi_resume_noirq(struct device *dev)
-{
-	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
-	int ret;
-
-	if (!pm_runtime_status_suspended(dev)) {
-		ret = at91_twi_runtime_resume(dev);
-		if (ret)
-			return ret;
-	}
-
-	pm_runtime_mark_last_busy(dev);
-	pm_request_autosuspend(dev);
-
-	at91_init_twi_bus(twi_dev);
-
-	return 0;
-}
-
-static const struct dev_pm_ops at91_twi_pm = {
-	.suspend_noirq	= at91_twi_suspend_noirq,
-	.resume_noirq	= at91_twi_resume_noirq,
-	.runtime_suspend	= at91_twi_runtime_suspend,
-	.runtime_resume		= at91_twi_runtime_resume,
-};
-
-#define at91_twi_pm_ops (&at91_twi_pm)
-#else
-#define at91_twi_pm_ops NULL
-#endif
-
-static struct platform_driver at91_twi_driver = {
-	.probe		= at91_twi_probe,
-	.remove		= at91_twi_remove,
-	.id_table	= at91_twi_devtypes,
-	.driver		= {
-		.name	= "at91_i2c",
-		.of_match_table = of_match_ptr(atmel_twi_dt_ids),
-		.pm	= at91_twi_pm_ops,
-	},
-};
-
-static int __init at91_twi_init(void)
-{
-	return platform_driver_register(&at91_twi_driver);
-}
-
-static void __exit at91_twi_exit(void)
-{
-	platform_driver_unregister(&at91_twi_driver);
-}
-
-subsys_initcall(at91_twi_init);
-module_exit(at91_twi_exit);
-
-MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>");
-MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_i2c");
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
new file mode 100644
index 0000000..555b167
--- /dev/null
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -0,0 +1,151 @@ 
+/*
+ *  i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+ *
+ *  Copyright (C) 2011 Weinmann Medical GmbH
+ *  Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ *  Evolved from original work by:
+ *  Copyright (C) 2004 Rick Bronson
+ *  Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+ *
+ *  Borrowed heavily from original work by:
+ *  Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_TWI_CLK_HZ		100000		/* max 400 Kbits/s */
+#define AT91_I2C_TIMEOUT	msecs_to_jiffies(100)	/* transfer timeout */
+#define AT91_I2C_DMA_THRESHOLD	8			/* enable DMA if transfer size is bigger than this threshold */
+#define AUTOSUSPEND_TIMEOUT		2000
+#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE	256
+
+/* AT91 TWI register definitions */
+#define	AT91_TWI_CR		0x0000	/* Control Register */
+#define	AT91_TWI_START		BIT(0)	/* Send a Start Condition */
+#define	AT91_TWI_STOP		BIT(1)	/* Send a Stop Condition */
+#define	AT91_TWI_MSEN		BIT(2)	/* Master Transfer Enable */
+#define	AT91_TWI_MSDIS		BIT(3)	/* Master Transfer Disable */
+#define	AT91_TWI_SVEN		BIT(4)	/* Slave Transfer Enable */
+#define	AT91_TWI_SVDIS		BIT(5)	/* Slave Transfer Disable */
+#define	AT91_TWI_QUICK		BIT(6)	/* SMBus quick command */
+#define	AT91_TWI_SWRST		BIT(7)	/* Software Reset */
+#define	AT91_TWI_ACMEN		BIT(16) /* Alternative Command Mode Enable */
+#define	AT91_TWI_ACMDIS		BIT(17) /* Alternative Command Mode Disable */
+#define	AT91_TWI_THRCLR		BIT(24) /* Transmit Holding Register Clear */
+#define	AT91_TWI_RHRCLR		BIT(25) /* Receive Holding Register Clear */
+#define	AT91_TWI_LOCKCLR	BIT(26) /* Lock Clear */
+#define	AT91_TWI_FIFOEN		BIT(28) /* FIFO Enable */
+#define	AT91_TWI_FIFODIS	BIT(29) /* FIFO Disable */
+
+#define	AT91_TWI_MMR		0x0004	/* Master Mode Register */
+#define	AT91_TWI_IADRSZ_1	0x0100	/* Internal Device Address Size */
+#define	AT91_TWI_MREAD		BIT(12)	/* Master Read Direction */
+
+#define	AT91_TWI_IADR		0x000c	/* Internal Address Register */
+
+#define	AT91_TWI_CWGR		0x0010	/* Clock Waveform Generator Reg */
+#define	AT91_TWI_CWGR_HOLD_MAX	0x1f
+#define	AT91_TWI_CWGR_HOLD(x)	(((x) & AT91_TWI_CWGR_HOLD_MAX) << 24)
+
+#define	AT91_TWI_SR		0x0020	/* Status Register */
+#define	AT91_TWI_TXCOMP		BIT(0)	/* Transmission Complete */
+#define	AT91_TWI_RXRDY		BIT(1)	/* Receive Holding Register Ready */
+#define	AT91_TWI_TXRDY		BIT(2)	/* Transmit Holding Register Ready */
+#define	AT91_TWI_OVRE		BIT(6)	/* Overrun Error */
+#define	AT91_TWI_UNRE		BIT(7)	/* Underrun Error */
+#define	AT91_TWI_NACK		BIT(8)	/* Not Acknowledged */
+#define	AT91_TWI_LOCK		BIT(23) /* TWI Lock due to Frame Errors */
+
+#define	AT91_TWI_INT_MASK \
+	(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
+
+#define	AT91_TWI_IER		0x0024	/* Interrupt Enable Register */
+#define	AT91_TWI_IDR		0x0028	/* Interrupt Disable Register */
+#define	AT91_TWI_IMR		0x002c	/* Interrupt Mask Register */
+#define	AT91_TWI_RHR		0x0030	/* Receive Holding Register */
+#define	AT91_TWI_THR		0x0034	/* Transmit Holding Register */
+
+#define	AT91_TWI_ACR		0x0040	/* Alternative Command Register */
+#define	AT91_TWI_ACR_DATAL(len)	((len) & 0xff)
+#define	AT91_TWI_ACR_DIR	BIT(8)
+
+#define	AT91_TWI_FMR		0x0050	/* FIFO Mode Register */
+#define	AT91_TWI_FMR_TXRDYM(mode)	(((mode) & 0x3) << 0)
+#define	AT91_TWI_FMR_TXRDYM_MASK	(0x3 << 0)
+#define	AT91_TWI_FMR_RXRDYM(mode)	(((mode) & 0x3) << 4)
+#define	AT91_TWI_FMR_RXRDYM_MASK	(0x3 << 4)
+#define	AT91_TWI_ONE_DATA	0x0
+#define	AT91_TWI_TWO_DATA	0x1
+#define	AT91_TWI_FOUR_DATA	0x2
+
+#define	AT91_TWI_FLR		0x0054	/* FIFO Level Register */
+
+#define	AT91_TWI_FSR		0x0060	/* FIFO Status Register */
+#define	AT91_TWI_FIER		0x0064	/* FIFO Interrupt Enable Register */
+#define	AT91_TWI_FIDR		0x0068	/* FIFO Interrupt Disable Register */
+#define	AT91_TWI_FIMR		0x006c	/* FIFO Interrupt Mask Register */
+
+#define	AT91_TWI_VER		0x00fc	/* Version Register */
+
+struct at91_twi_pdata {
+	unsigned clk_max_div;
+	unsigned clk_offset;
+	bool has_unre_flag;
+	bool has_alt_cmd;
+	bool has_hold_field;
+	struct at_dma_slave dma_slave;
+};
+
+struct at91_twi_dma {
+	struct dma_chan *chan_rx;
+	struct dma_chan *chan_tx;
+	struct scatterlist sg[2];
+	struct dma_async_tx_descriptor *data_desc;
+	enum dma_data_direction direction;
+	bool buf_mapped;
+	bool xfer_in_progress;
+};
+
+struct at91_twi_dev {
+	struct device *dev;
+	void __iomem *base;
+	struct completion cmd_complete;
+	struct clk *clk;
+	u8 *buf;
+	size_t buf_len;
+	struct i2c_msg *msg;
+	int irq;
+	unsigned imr;
+	unsigned transfer_status;
+	struct i2c_adapter adapter;
+	unsigned twi_cwgr_reg;
+	struct at91_twi_pdata *pdata;
+	bool use_dma;
+	bool use_alt_cmd;
+	bool recv_len_abort;
+	u32 fifo_size;
+	struct at91_twi_dma dma;
+};
+
+unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg);
+void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val);
+void at91_disable_twi_interrupts(struct at91_twi_dev *dev);
+void at91_twi_irq_save(struct at91_twi_dev *dev);
+void at91_twi_irq_restore(struct at91_twi_dev *dev);
+void at91_init_twi_bus(struct at91_twi_dev *dev);
+
+void at91_init_twi_bus_master(struct at91_twi_dev *dev);
+int at91_twi_probe_master(struct platform_device *pdev, u32 phy_addr,
+			  struct at91_twi_dev *dev);