diff mbox series

[U-Boot,4/9] arm: zynq: Sync location of DT properties with Linux

Message ID df839276af848d10710cef09c83d92742a57f95c.1509648620.git.michal.simek@xilinx.com
State Accepted
Commit 534f7e0235ae95a7325e418d77a1dd661eee0d11
Delegated to: Michal Simek
Headers show
Series [U-Boot,1/9] arm: zynq: Add SCL & SDA GPIO entries for recovery | expand

Commit Message

Michal Simek Nov. 2, 2017, 6:50 p.m. UTC 
This is trival change which only ensures the same location with Linux
kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/dts/zynq-7000.dtsi | 2 +-
 arch/arm/dts/zynq-zybo.dts  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index f993e19ef280..d9774d85d10b 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -105,10 +105,10 @@ 
 		gpio0: gpio@e000a000 {
 			compatible = "xlnx,zynq-gpio-1.0";
 			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
 			clocks = <&clkc 42>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupts = <0 20 4>;
 			reg = <0xe000a000 0x1000>;
diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
index f3eebb088287..52ec5a45667a 100644
--- a/arch/arm/dts/zynq-zybo.dts
+++ b/arch/arm/dts/zynq-zybo.dts
@@ -31,8 +31,8 @@ 
 	};
 
 	usb_phy0: phy0 {
-		compatible = "usb-nop-xceiv";
 		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio0 46 1>;
 	};
 };