diff mbox series

[6/7] netdev: octeon-ethernet: Add Cavium Octeon III support.

Message ID 20171102003606.19913-7-david.daney@cavium.com
State Changes Requested, archived
Delegated to: David Miller
Headers show
Series Cavium OCTEON-III network driver. | expand

Commit Message

David Daney Nov. 2, 2017, 12:36 a.m. UTC 
From: Carlos Munoz <cmunoz@cavium.com>

The Cavium OCTEON cn78xx and cn73xx SoCs have network packet I/O
hardware that is significantly different from previous generations of
the family.

Add a new driver for this hardware.  The Ethernet MAC is called BGX on
these devices.  Common code for the MAC is in octeon3-bgx-port.c.
Four of these BGX MACs are grouped together and managed as a group by
octeon3-bgx-nexus.c.  Ingress packet classification is done by the PKI
unit initialized in octeon3-pki.c.  Queue management is done in the
SSO, initialized by octeon3-sso.c.  Egress is handled by the PKO,
initialized in octeon3-pko.c.

Signed-off-by: Carlos Munoz <cmunoz@cavium.com>
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
 drivers/net/ethernet/cavium/Kconfig                |   28 +-
 drivers/net/ethernet/cavium/octeon/Makefile        |    6 +
 .../net/ethernet/cavium/octeon/octeon3-bgx-nexus.c |  698 +++++++
 .../net/ethernet/cavium/octeon/octeon3-bgx-port.c  | 2023 +++++++++++++++++++
 drivers/net/ethernet/cavium/octeon/octeon3-core.c  | 2075 ++++++++++++++++++++
 drivers/net/ethernet/cavium/octeon/octeon3-pki.c   |  833 ++++++++
 drivers/net/ethernet/cavium/octeon/octeon3-pko.c   | 1719 ++++++++++++++++
 drivers/net/ethernet/cavium/octeon/octeon3-sso.c   |  309 +++
 drivers/net/ethernet/cavium/octeon/octeon3.h       |  411 ++++
 9 files changed, 8101 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c
 create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c
 create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-core.c
 create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-pki.c
 create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-pko.c
 create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-sso.c
 create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3.h

Comments

Andrew Lunn Nov. 2, 2017, 12:43 p.m. UTC | #1 
> +static int bgx_probe(struct platform_device *pdev)
> +{
> +	struct mac_platform_data platform_data;
> +	const __be32 *reg;
> +	u32 port;
> +	u64 addr;
> +	struct device_node *child;
> +	struct platform_device *new_dev;
> +	struct platform_device *pki_dev;
> +	int numa_node, interface;
> +	int i;
> +	int r = 0;
> +	char id[64];
> +	u64 data;
> +
> +	reg = of_get_property(pdev->dev.of_node, "reg", NULL);
> +	addr = of_translate_address(pdev->dev.of_node, reg);
> +	interface = (addr >> 24) & 0xf;
> +	numa_node = (addr >> 36) & 0x7;
> +
> +	/* Assign 8 CAM entries per LMAC */
> +	for (i = 0; i < 32; i++) {
> +		data = i >> 3;
> +		oct_csr_write(data, BGX_CMR_RX_ADRX_CAM(numa_node, interface, i));
> +	}
> +
> +	for_each_available_child_of_node(pdev->dev.of_node, child) {
> +		snprintf(id, sizeof(id), "%llx.%u.ethernet-mac",
> +			 (unsigned long long)addr, port);
> +		new_dev = of_platform_device_create(child, id, &pdev->dev);
> +		if (!new_dev) {
> +			dev_err(&pdev->dev, "Error creating %s\n", id);
> +			continue;
> +		}
> +		platform_data.mac_type = BGX_MAC;
> +		platform_data.numa_node = numa_node;
> +		platform_data.interface = interface;
> +		platform_data.port = port;
> +		if (is_xcv)
> +			platform_data.src_type = XCV;
> +		else
> +			platform_data.src_type = QLM;
> +
> +		/* Add device to the list of created devices so we can remove it
> +		 * on exit.
> +		 */
> +		pdev_item = kmalloc(sizeof(*pdev_item), GFP_KERNEL);
> +		pdev_item->pdev = new_dev;
> +		mutex_lock(&pdev_list_lock);
> +		list_add(&pdev_item->list, &pdev_list);
> +		mutex_unlock(&pdev_list_lock);
> +
> +		i = atomic_inc_return(&pki_id);
> +		pki_dev = platform_device_register_data(&new_dev->dev,
> +							is_mix ? "octeon_mgmt" : "ethernet-mac-pki",
> +							i, &platform_data, sizeof(platform_data));
> +		dev_info(&pdev->dev, "Created %s %u: %p\n",
> +			 is_mix ? "MIX" : "PKI", pki_dev->id, pki_dev);

Is there any change of these ethernet ports being used to connect to
an Ethernet switch. We have had issues in the past with these sort of
platform devices combined with DSA.

	 Andrew
David Daney Nov. 2, 2017, 3:55 p.m. UTC | #2 
On 11/02/2017 05:43 AM, Andrew Lunn wrote:
[...]
>> +
>> +		i = atomic_inc_return(&pki_id);
>> +		pki_dev = platform_device_register_data(&new_dev->dev,
>> +							is_mix ? "octeon_mgmt" : "ethernet-mac-pki",
>> +							i, &platform_data, sizeof(platform_data));
>> +		dev_info(&pdev->dev, "Created %s %u: %p\n",
>> +			 is_mix ? "MIX" : "PKI", pki_dev->id, pki_dev);
> 
> Is there any change of these ethernet ports being used to connect to
> an Ethernet switch. We have had issues in the past with these sort of
> platform devices combined with DSA.
> 

There are only two possibilities.  The BGX MACs have a multiplexer that 
allows them to be connected to either the "octeon_mgmt" MIX packet 
processor, or to the "ethernet-mac-pki" PKI/PKO packet processor.  The 
SoCs supported by these drivers do not contain any hardware that would 
be considered an "Ethernet switch".

I'm not sure I fully understand what your question is though, so I may 
not have answered it.

David Daney
Andrew Lunn Nov. 2, 2017, 4:10 p.m. UTC | #3 
On Thu, Nov 02, 2017 at 08:55:33AM -0700, David Daney wrote:
> On 11/02/2017 05:43 AM, Andrew Lunn wrote:
> [...]
> >>+
> >>+		i = atomic_inc_return(&pki_id);
> >>+		pki_dev = platform_device_register_data(&new_dev->dev,
> >>+							is_mix ? "octeon_mgmt" : "ethernet-mac-pki",
> >>+							i, &platform_data, sizeof(platform_data));
> >>+		dev_info(&pdev->dev, "Created %s %u: %p\n",
> >>+			 is_mix ? "MIX" : "PKI", pki_dev->id, pki_dev);
> >
> >Is there any change of these ethernet ports being used to connect to
> >an Ethernet switch. We have had issues in the past with these sort of
> >platform devices combined with DSA.
> >
> 
> There are only two possibilities.  The BGX MACs have a multiplexer that
> allows them to be connected to either the "octeon_mgmt" MIX packet
> processor, or to the "ethernet-mac-pki" PKI/PKO packet processor.  The SoCs
> supported by these drivers do not contain any hardware that would be
> considered an "Ethernet switch".

Hi David

I was thinking of an external Ethernet switch. You generally connect
via RGMII to a port of the switch.

http://elixir.free-electrons.com/linux/v4.9.60/source/Documentation/networking/dsa/dsa.txt

	Andrew
David Daney Nov. 2, 2017, 4:37 p.m. UTC | #4 
On 11/02/2017 09:10 AM, Andrew Lunn wrote:
> On Thu, Nov 02, 2017 at 08:55:33AM -0700, David Daney wrote:
>> On 11/02/2017 05:43 AM, Andrew Lunn wrote:
>> [...]
>>>> +
>>>> +		i = atomic_inc_return(&pki_id);
>>>> +		pki_dev = platform_device_register_data(&new_dev->dev,
>>>> +							is_mix ? "octeon_mgmt" : "ethernet-mac-pki",
>>>> +							i, &platform_data, sizeof(platform_data));
>>>> +		dev_info(&pdev->dev, "Created %s %u: %p\n",
>>>> +			 is_mix ? "MIX" : "PKI", pki_dev->id, pki_dev);
>>>
>>> Is there any change of these ethernet ports being used to connect to
>>> an Ethernet switch. We have had issues in the past with these sort of
>>> platform devices combined with DSA.
>>>
>>
>> There are only two possibilities.  The BGX MACs have a multiplexer that
>> allows them to be connected to either the "octeon_mgmt" MIX packet
>> processor, or to the "ethernet-mac-pki" PKI/PKO packet processor.  The SoCs
>> supported by these drivers do not contain any hardware that would be
>> considered an "Ethernet switch".
> 
> Hi David
> 
> I was thinking of an external Ethernet switch. You generally connect
> via RGMII to a port of the switch.
> 

OK, now I think I understand.  Yes, the MAC can be hardwired to a 
switch.  In fact, there are system designs that do exactly that.

We try to handle this case by not having a "phy-handle" property in the 
device tree.  The link to the remote device (switch IC in this case) is 
brought up on ndo_open()

There may be opportunities to improve how this works in the future, but 
the current code is serviceable.

> http://elixir.free-electrons.com/linux/v4.9.60/source/Documentation/networking/dsa/dsa.txt
> 
> 	Andrew
>
Andrew Lunn Nov. 2, 2017, 4:56 p.m. UTC | #5 
> OK, now I think I understand.  Yes, the MAC can be hardwired to a switch.
> In fact, there are system designs that do exactly that.
> 
> We try to handle this case by not having a "phy-handle" property in the
> device tree.  The link to the remote device (switch IC in this case) is
> brought up on ndo_open()

O.K, so you totally ignore the Linux way of doing this and hack
together your own proprietary solution.
 
> There may be opportunities to improve how this works in the future, but the
> current code is serviceable.

It might be serviceable, but it will never get into mainline. For
mainline, you need to use DSA.

http://elixir.free-electrons.com/linux/v4.9.60/source/Documentation/networking/dsa/dsa.txt

Getting back to my original point, having these platform devices can
cause issues for DSA. Freescale FMAN has a similar architecture, and
it took a while to restructure it to make DSA work.

https://www.spinics.net/lists/netdev/msg459394.html

	Andrew
David Daney Nov. 2, 2017, 6:31 p.m. UTC | #6 
On 11/02/2017 09:56 AM, Andrew Lunn wrote:
>> OK, now I think I understand.  Yes, the MAC can be hardwired to a switch.
>> In fact, there are system designs that do exactly that.
>>
>> We try to handle this case by not having a "phy-handle" property in the
>> device tree.  The link to the remote device (switch IC in this case) is
>> brought up on ndo_open()
> 
> O.K, so you totally ignore the Linux way of doing this and hack
> together your own proprietary solution.

I am going to add handling of the "phy-mode" property, but other than 
that I don't know what the "Linux way" of specifying a hard MAC-to-MAC 
connection with no intervening phy devices is.  Wether the remote MAC is 
a switch, or something else, would seem to be irrelevant.  All we are 
concerned about in this code is putting the thing into a state where 
data flows in both directions through the MAC.

A pointer to an existing device tree binding for an Ethernet device that 
has no (or an optional) phy device would be useful, we can try to do the 
same.


>   
>> There may be opportunities to improve how this works in the future, but the
>> current code is serviceable.
> 
> It might be serviceable, but it will never get into mainline. For
> mainline, you need to use DSA.
> 
> http://elixir.free-electrons.com/linux/v4.9.60/source/Documentation/networking/dsa/dsa.txt


I am truly at a loss here.  That DSA document states:

      Master network devices are regular, unmodified Linux
      network device drivers for the CPU/management Ethernet
      interface.

What modification do you suggest I make?


> 
> Getting back to my original point, having these platform devices can
> cause issues for DSA. Freescale FMAN has a similar architecture, and
> it took a while to restructure it to make DSA work.
> 
> https://www.spinics.net/lists/netdev/msg459394.html
> 
> 	Andrew
>
Florian Fainelli Nov. 2, 2017, 6:53 p.m. UTC | #7 
On 11/02/2017 11:31 AM, David Daney wrote:
> On 11/02/2017 09:56 AM, Andrew Lunn wrote:
>>> OK, now I think I understand.  Yes, the MAC can be hardwired to a
>>> switch.
>>> In fact, there are system designs that do exactly that.
>>>
>>> We try to handle this case by not having a "phy-handle" property in the
>>> device tree.  The link to the remote device (switch IC in this case) is
>>> brought up on ndo_open()
>>
>> O.K, so you totally ignore the Linux way of doing this and hack
>> together your own proprietary solution.
> 
> I am going to add handling of the "phy-mode" property, but other than
> that I don't know what the "Linux way" of specifying a hard MAC-to-MAC
> connection with no intervening phy devices is.  Wether the remote MAC is
> a switch, or something else, would seem to be irrelevant.  All we are
> concerned about in this code is putting the thing into a state where
> data flows in both directions through the MAC.

The canonical way to support that type of connections is to use use a
fixed-link property describing the link between the two MACs, ideally
putting the same fixed-link property on both sides.

> 
> A pointer to an existing device tree binding for an Ethernet device that
> has no (or an optional) phy device would be useful, we can try to do the
> same.
> 
> 
>>  
>>> There may be opportunities to improve how this works in the future,
>>> but the
>>> current code is serviceable.
>>
>> It might be serviceable, but it will never get into mainline. For
>> mainline, you need to use DSA.
>>
>> http://elixir.free-electrons.com/linux/v4.9.60/source/Documentation/networking/dsa/dsa.txt
>>
> 
> 
> I am truly at a loss here.  That DSA document states:
> 
>      Master network devices are regular, unmodified Linux
>      network device drivers for the CPU/management Ethernet
>      interface.
> 
> What modification do you suggest I make?

If you support normal phy_device and fixed-link devices, you should be
good as far as using PHYLIB and interfacing with Ethernet switchses
using DSA for instance. What Andrew is asking you though is to make sure
that the platform device dance between the bgx drivers and the other
modules preserves the Device Tree parenting, of_node pointers such that
a DSA switch, which needs to reference a CPU/management port, has a
chance to successfully look up that node via of_find_net_device_by_node().

> 
> 
>>
>> Getting back to my original point, having these platform devices can
>> cause issues for DSA. Freescale FMAN has a similar architecture, and
>> it took a while to restructure it to make DSA work.
>>
>> https://www.spinics.net/lists/netdev/msg459394.html
>>
>>     Andrew
>>
> 
> -- 
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Florian Fainelli Nov. 2, 2017, 7:13 p.m. UTC | #8 
On 11/01/2017 05:36 PM, David Daney wrote:
> From: Carlos Munoz <cmunoz@cavium.com>
> 
> The Cavium OCTEON cn78xx and cn73xx SoCs have network packet I/O
> hardware that is significantly different from previous generations of
> the family.
> 
> Add a new driver for this hardware.  The Ethernet MAC is called BGX on
> these devices.  Common code for the MAC is in octeon3-bgx-port.c.
> Four of these BGX MACs are grouped together and managed as a group by
> octeon3-bgx-nexus.c.  Ingress packet classification is done by the PKI
> unit initialized in octeon3-pki.c.  Queue management is done in the
> SSO, initialized by octeon3-sso.c.  Egress is handled by the PKO,
> initialized in octeon3-pko.c.
> 
> Signed-off-by: Carlos Munoz <cmunoz@cavium.com>
> Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
> Signed-off-by: David Daney <david.daney@cavium.com>
> ---

> +static char *mix_port;
> +module_param(mix_port, charp, 0444);
> +MODULE_PARM_DESC(mix_port, "Specifies which ports connect to MIX interfaces.");

Can you derive this from Device Tree /platform data configuration?

> +
> +static char *pki_port;
> +module_param(pki_port, charp, 0444);
> +MODULE_PARM_DESC(pki_port, "Specifies which ports connect to the PKI.");

Likewise

> +
> +#define MAX_MIX_PER_NODE	2
> +
> +#define MAX_MIX			(MAX_NODES * MAX_MIX_PER_NODE)
> +
> +/**
> + * struct mix_port_lmac - Describes a lmac that connects to a mix
> + *			  port. The lmac must be on the same node as
> + *			  the mix.
> + * @node:	Node of the lmac.
> + * @bgx:	Bgx of the lmac.
> + * @lmac:	Lmac index.
> + */
> +struct mix_port_lmac {
> +	int	node;
> +	int	bgx;
> +	int	lmac;
> +};
> +
> +/* mix_ports_lmacs contains all the lmacs connected to mix ports */
> +static struct mix_port_lmac mix_port_lmacs[MAX_MIX];
> +
> +/* pki_ports keeps track of the lmacs connected to the pki */
> +static bool pki_ports[MAX_NODES][MAX_BGX_PER_NODE][MAX_LMAC_PER_BGX];
> +
> +/* Created platform devices get added to this list */
> +static struct list_head pdev_list;
> +static struct mutex pdev_list_lock;
> +
> +/* Created platform device use this structure to add themselves to the list */
> +struct pdev_list_item {
> +	struct list_head	list;
> +	struct platform_device	*pdev;
> +};

Don't you have a top-level platform device that you could use which
would hold this data instead of having it here?

[snip]

> +/* Registers are accessed via xkphys */
> +#define SSO_BASE			0x1670000000000ull
> +#define SSO_ADDR(node)			(SET_XKPHYS + NODE_OFFSET(node) +      \
> +					 SSO_BASE)
> +#define GRP_OFFSET(grp)			((grp) << 16)
> +#define GRP_ADDR(n, g)			(SSO_ADDR(n) + GRP_OFFSET(g))
> +#define SSO_GRP_AQ_CNT(n, g)		(GRP_ADDR(n, g)		   + 0x20000700)
> +
> +#define MIO_PTP_BASE			0x1070000000000ull
> +#define MIO_PTP_ADDR(node)		(SET_XKPHYS + NODE_OFFSET(node) +      \
> +					 MIO_PTP_BASE)
> +#define MIO_PTP_CLOCK_CFG(node)		(MIO_PTP_ADDR(node)		+ 0xf00)
> +#define MIO_PTP_CLOCK_HI(node)		(MIO_PTP_ADDR(node)		+ 0xf10)
> +#define MIO_PTP_CLOCK_COMP(node)	(MIO_PTP_ADDR(node)		+ 0xf18)

I am sure this will work great on anything but MIPS64 ;)

> +
> +struct octeon3_ethernet;
> +
> +struct octeon3_rx {
> +	struct napi_struct	napi;
> +	struct octeon3_ethernet *parent;
> +	int rx_grp;
> +	int rx_irq;
> +	cpumask_t rx_affinity_hint;
> +} ____cacheline_aligned_in_smp;
> +
> +struct octeon3_ethernet {
> +	struct bgx_port_netdev_priv bgx_priv; /* Must be first element. */
> +	struct list_head list;
> +	struct net_device *netdev;
> +	enum octeon3_mac_type mac_type;
> +	struct octeon3_rx rx_cxt[MAX_RX_QUEUES];
> +	struct ptp_clock_info ptp_info;
> +	struct ptp_clock *ptp_clock;
> +	struct cyclecounter cc;
> +	struct timecounter tc;
> +	spinlock_t ptp_lock;		/* Serialize ptp clock adjustments */
> +	int num_rx_cxt;
> +	int pki_aura;
> +	int pknd;
> +	int pko_queue;
> +	int node;
> +	int interface;
> +	int index;
> +	int rx_buf_count;
> +	int tx_complete_grp;
> +	int rx_timestamp_hw:1;
> +	int tx_timestamp_hw:1;
> +	spinlock_t stat_lock;		/* Protects stats counters */
> +	u64 last_packets;
> +	u64 last_octets;
> +	u64 last_dropped;
> +	atomic64_t rx_packets;
> +	atomic64_t rx_octets;
> +	atomic64_t rx_dropped;
> +	atomic64_t rx_errors;
> +	atomic64_t rx_length_errors;
> +	atomic64_t rx_crc_errors;
> +	atomic64_t tx_packets;
> +	atomic64_t tx_octets;
> +	atomic64_t tx_dropped;

Do you really need those to be truly atomic64_t types, can't you use u64
and use the helpers from u64_stats_sync.h? That should be good enough?

> +	/* The following two fields need to be on a different cache line as
> +	 * they are updated by pko which invalidates the cache every time it
> +	 * updates them. The idea is to prevent other fields from being
> +	 * invalidated unnecessarily.
> +	 */
> +	char cacheline_pad1[CVMX_CACHE_LINE_SIZE];
> +	atomic64_t buffers_needed;
> +	atomic64_t tx_backlog;
> +	char cacheline_pad2[CVMX_CACHE_LINE_SIZE];
> +};
> +
> +static DEFINE_MUTEX(octeon3_eth_init_mutex);
> +
> +struct octeon3_ethernet_node;
> +
> +struct octeon3_ethernet_worker {
> +	wait_queue_head_t queue;
> +	struct task_struct *task;
> +	struct octeon3_ethernet_node *oen;
> +	atomic_t kick;
> +	int order;
> +};
> +
> +struct octeon3_ethernet_node {
> +	bool init_done;
> +	int next_cpu_irq_affinity;
> +	int node;
> +	int pki_packet_pool;
> +	int sso_pool;
> +	int pko_pool;
> +	void *sso_pool_stack;
> +	void *pko_pool_stack;
> +	void *pki_packet_pool_stack;
> +	int sso_aura;
> +	int pko_aura;
> +	int tx_complete_grp;
> +	int tx_irq;
> +	cpumask_t tx_affinity_hint;
> +	struct octeon3_ethernet_worker workers[8];
> +	struct mutex device_list_lock;	/* Protects the device list */
> +	struct list_head device_list;
> +	spinlock_t napi_alloc_lock;	/* Protects napi allocations */
> +};
> +
> +static int wait_pko_response;
> +module_param(wait_pko_response, int, 0644);
> +MODULE_PARM_DESC(wait_pko_response, "Wait for response after each pko command.");

Under which circumstances is this used?

> +
> +static int num_packet_buffers = 768;
> +module_param(num_packet_buffers, int, 0444);
> +MODULE_PARM_DESC(num_packet_buffers,
> +		 "Number of packet buffers to allocate per port.");

Consider implementing ethtool -g/G for this.

> +
> +static int packet_buffer_size = 2048;
> +module_param(packet_buffer_size, int, 0444);
> +MODULE_PARM_DESC(packet_buffer_size, "Size of each RX packet buffer.");

How is that different from adjusting the network device's MTU?

> +
> +static int rx_queues = 1;
> +module_param(rx_queues, int, 0444);
> +MODULE_PARM_DESC(rx_queues, "Number of RX threads per port.");

Same thing, can you consider using an ethtool knob for that?

> +
> +int ilk0_lanes = 1;
> +module_param(ilk0_lanes, int, 0444);
> +MODULE_PARM_DESC(ilk0_lanes, "Number of SerDes lanes used by ILK link 0.");
> +
> +int ilk1_lanes = 1;
> +module_param(ilk1_lanes, int, 0444);
> +MODULE_PARM_DESC(ilk1_lanes, "Number of SerDes lanes used by ILK link 1.");
> +
> +static struct octeon3_ethernet_node octeon3_eth_node[MAX_NODES];
> +static struct kmem_cache *octeon3_eth_sso_pko_cache;
> +
> +/**
> + * Reads a 64 bit value from the processor local scratchpad memory.
> + *
> + * @param offset byte offset into scratch pad to read
> + *
> + * @return value read
> + */
> +static inline u64 scratch_read64(u64 offset)
> +{
> +	return *(u64 *)((long)SCRATCH_BASE + offset);
> +}

No barriers needed whatsoever?

> +
> +/**
> + * Write a 64 bit value to the processor local scratchpad memory.
> + *
> + * @param offset byte offset into scratch pad to write
> + @ @praram value to write
> + */
> +static inline void scratch_write64(u64 offset, u64 value)
> +{
> +	*(u64 *)((long)SCRATCH_BASE + offset) = value;
> +}
> +
> +static int get_pki_chan(int node, int interface, int index)
> +{
> +	int	pki_chan;
> +
> +	pki_chan = node << 12;
> +
> +	if (OCTEON_IS_MODEL(OCTEON_CNF75XX) &&
> +	    (interface == 1 || interface == 2)) {
> +		/* SRIO */
> +		pki_chan |= 0x240 + (2 * (interface - 1)) + index;
> +	} else {
> +		/* BGX */
> +		pki_chan |= 0x800 + (0x100 * interface) + (0x10 * index);
> +	}
> +
> +	return pki_chan;
> +}
> +
> +/* Map auras to the field priv->buffers_needed. Used to speed up packet
> + * transmission.
> + */
> +static void *aura2bufs_needed[MAX_NODES][FPA3_NUM_AURAS];
> +
> +static int octeon3_eth_lgrp_to_ggrp(int node, int grp)
> +{
> +	return (node << 8) | grp;
> +}
> +
> +static void octeon3_eth_gen_affinity(int node, cpumask_t *mask)
> +{
> +	int cpu;
> +
> +	do {
> +		cpu = cpumask_next(octeon3_eth_node[node].next_cpu_irq_affinity, cpu_online_mask);
> +		octeon3_eth_node[node].next_cpu_irq_affinity++;
> +		if (cpu >= nr_cpu_ids) {
> +			octeon3_eth_node[node].next_cpu_irq_affinity = -1;
> +			continue;
> +		}
> +	} while (false);
> +	cpumask_clear(mask);
> +	cpumask_set_cpu(cpu, mask);
> +}
> +
> +struct wr_ret {
> +	void *work;
> +	u16 grp;
> +};
> +
> +static inline struct wr_ret octeon3_core_get_work_sync(int grp)
> +{
> +	u64		node = cvmx_get_node_num();
> +	u64		addr;
> +	u64		response;
> +	struct wr_ret	r;
> +
> +	/* See SSO_GET_WORK_LD_S for the address to read */
> +	addr = 1ull << 63;
> +	addr |= BIT(48);
> +	addr |= DID_TAG_SWTAG << 40;
> +	addr |= node << 36;
> +	addr |= BIT(30);
> +	addr |= BIT(29);
> +	addr |= octeon3_eth_lgrp_to_ggrp(node, grp) << 4;
> +	addr |= SSO_NO_WAIT << 3;
> +	response = __raw_readq((void __iomem *)addr);
> +
> +	/* See SSO_GET_WORK_RTN_S for the format of the response */
> +	r.grp = (response & GENMASK_ULL(57, 48)) >> 48;
> +	if (response & BIT(63))
> +		r.work = NULL;
> +	else
> +		r.work = phys_to_virt(response & GENMASK_ULL(41, 0));

There are quite a lot of phys_to_virt() and virt_to_phys() uses
throughout this driver, this will likely not work on anything but
MIPS64, so there should be a better way, abstracted to do this, see below.

> +
> +	return r;
> +}
> +
> +/**
> + * octeon3_core_get_work_async - Request work via a iobdma command. Doesn't wait
> + *				 for the response.
> + *
> + * @grp: Group to request work for.
> + */
> +static inline void octeon3_core_get_work_async(unsigned int grp)
> +{
> +	u64	data;
> +	u64	node = cvmx_get_node_num();
> +
> +	/* See SSO_GET_WORK_DMA_S for the command structure */
> +	data = SCR_SCRATCH << 56;
> +	data |= 1ull << 48;
> +	data |= DID_TAG_SWTAG << 40;
> +	data |= node << 36;
> +	data |= 1ull << 30;
> +	data |= 1ull << 29;
> +	data |= octeon3_eth_lgrp_to_ggrp(node, grp) << 4;
> +	data |= SSO_NO_WAIT << 3;
> +
> +	__raw_writeq(data, (void __iomem *)IOBDMA_SENDSINGLE);
> +}
> +
> +/**
> + * octeon3_core_get_response_async - Read the request work response. Must be
> + *				     called after calling
> + *				     octeon3_core_get_work_async().
> + *
> + * Returns work queue entry.
> + */
> +static inline struct wr_ret octeon3_core_get_response_async(void)
> +{
> +	struct wr_ret	r;
> +	u64		response;
> +
> +	CVMX_SYNCIOBDMA;
> +	response = scratch_read64(SCR_SCRATCH);
> +
> +	/* See SSO_GET_WORK_RTN_S for the format of the response */
> +	r.grp = (response & GENMASK_ULL(57, 48)) >> 48;
> +	if (response & BIT(63))
> +		r.work = NULL;
> +	else
> +		r.work = phys_to_virt(response & GENMASK_ULL(41, 0));
> +
> +	return r;
> +}
> +
> +static void octeon3_eth_replenish_rx(struct octeon3_ethernet *priv, int count)
> +{
> +	struct sk_buff *skb;
> +	int i;
> +
> +	for (i = 0; i < count; i++) {
> +		void **buf;
> +
> +		skb = __alloc_skb(packet_buffer_size, GFP_ATOMIC, 0, priv->node);
> +		if (!skb)
> +			break;
> +		buf = (void **)PTR_ALIGN(skb->head, 128);
> +		buf[SKB_PTR_OFFSET] = skb;

Can you use build_skb()?

> +		octeon_fpa3_free(priv->node, priv->pki_aura, buf);
> +	}
> +}
> +

[snip]

> +static int octeon3_eth_tx_complete_worker(void *data)
> +{
> +	struct octeon3_ethernet_worker *worker = data;
> +	struct octeon3_ethernet_node *oen = worker->oen;
> +	int backlog;
> +	int order = worker->order;
> +	int tx_complete_stop_thresh = order * 100;
> +	int backlog_stop_thresh = order == 0 ? 31 : order * 80;
> +	u64 aq_cnt;
> +	int i;
> +
> +	while (!kthread_should_stop()) {
> +		wait_event_interruptible(worker->queue, octeon3_eth_tx_complete_runnable(worker));
> +		atomic_dec_if_positive(&worker->kick); /* clear the flag */
> +
> +		do {
> +			backlog = octeon3_eth_replenish_all(oen);
> +			for (i = 0; i < 100; i++) {

Do you really want to bound your TX reclamation worker, all other
network drivers never bound their napi TX completion task and instead
reclaim every transmitted buffers.

> +				void **work;
> +				struct net_device *tx_netdev;
> +				struct octeon3_ethernet *tx_priv;
> +				struct sk_buff *skb;
> +				struct wr_ret r;
> +
> +				r = octeon3_core_get_work_sync(oen->tx_complete_grp);
> +				work = r.work;
> +				if (!work)
> +					break;
> +				tx_netdev = work[0];
> +				tx_priv = netdev_priv(tx_netdev);
> +				if (unlikely(netif_queue_stopped(tx_netdev)) &&
> +				    atomic64_read(&tx_priv->tx_backlog) < MAX_TX_QUEUE_DEPTH)
> +					netif_wake_queue(tx_netdev);
> +				skb = container_of((void *)work, struct sk_buff, cb);
> +				if (unlikely(tx_priv->tx_timestamp_hw) &&
> +				    unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
> +					octeon3_eth_tx_complete_hwtstamp(tx_priv, skb);

This is where you should be incremeting the TX bytes and packets
statistcs, not in your ndo_start_xmit() like you are currently doing.

> +				dev_kfree_skb(skb);

Consider using dev_consume_skb() to be drop-monitor friendly.

> +			}
> +
> +			aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(oen->node, oen->tx_complete_grp));
> +			aq_cnt &= GENMASK_ULL(32, 0);
> +			if ((backlog > backlog_stop_thresh || aq_cnt > tx_complete_stop_thresh) &&
> +			    order < ARRAY_SIZE(oen->workers) - 1) {
> +				atomic_set(&oen->workers[order + 1].kick, 1);
> +				wake_up(&oen->workers[order + 1].queue);
> +			}
> +		} while (!need_resched() &&
> +			 (backlog > backlog_stop_thresh ||
> +			  aq_cnt > tx_complete_stop_thresh));
> +
> +		cond_resched();
> +
> +		if (!octeon3_eth_tx_complete_runnable(worker))
> +			octeon3_sso_irq_set(oen->node, oen->tx_complete_grp, true);
> +	}
> +
> +	return 0;
> +}
> +
> +static irqreturn_t octeon3_eth_tx_handler(int irq, void *info)
> +{
> +	struct octeon3_ethernet_node *oen = info;
> +	/* Disarm the irq. */
> +	octeon3_sso_irq_set(oen->node, oen->tx_complete_grp, false);
> +	atomic_set(&oen->workers[0].kick, 1);
> +	wake_up(&oen->workers[0].queue);

Can you move the whole worker to a NAPI context/softirq context?

> +	return IRQ_HANDLED;
> +}
> +
> +static int octeon3_eth_global_init(unsigned int node,
> +				   struct platform_device *pdev)
> +{
> +	int i;
> +	int rv = 0;
> +	unsigned int sso_intsn;
> +	struct octeon3_ethernet_node *oen;
> +
> +	mutex_lock(&octeon3_eth_init_mutex);
> +
> +	oen = octeon3_eth_node + node;
> +
> +	if (oen->init_done)
> +		goto done;
> +
> +	/* CN78XX-P1.0 cannot un-initialize PKO, so get a module
> +	 * reference to prevent it from being unloaded.
> +	 */
> +	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_0))
> +		if (!try_module_get(THIS_MODULE))
> +			dev_err(&pdev->dev,
> +				"ERROR: Could not obtain module reference for CN78XX-P1.0\n");
> +
> +	INIT_LIST_HEAD(&oen->device_list);
> +	mutex_init(&oen->device_list_lock);
> +	spin_lock_init(&oen->napi_alloc_lock);
> +
> +	oen->node = node;
> +
> +	octeon_fpa3_init(node);
> +	rv = octeon_fpa3_pool_init(node, -1, &oen->sso_pool,
> +				   &oen->sso_pool_stack, 40960);
> +	if (rv)
> +		goto done;
> +
> +	rv = octeon_fpa3_pool_init(node, -1, &oen->pko_pool,
> +				   &oen->pko_pool_stack, 40960);
> +	if (rv)
> +		goto done;
> +
> +	rv = octeon_fpa3_pool_init(node, -1, &oen->pki_packet_pool,
> +				   &oen->pki_packet_pool_stack, 64 * num_packet_buffers);
> +	if (rv)
> +		goto done;
> +
> +	rv = octeon_fpa3_aura_init(node, oen->sso_pool, -1,
> +				   &oen->sso_aura, num_packet_buffers, 20480);
> +	if (rv)
> +		goto done;
> +
> +	rv = octeon_fpa3_aura_init(node, oen->pko_pool, -1,
> +				   &oen->pko_aura, num_packet_buffers, 20480);
> +	if (rv)
> +		goto done;
> +
> +	dev_info(&pdev->dev, "SSO:%d:%d, PKO:%d:%d\n", oen->sso_pool,
> +		 oen->sso_aura, oen->pko_pool, oen->pko_aura);
> +
> +	if (!octeon3_eth_sso_pko_cache) {
> +		octeon3_eth_sso_pko_cache = kmem_cache_create("sso_pko", 4096, 128, 0, NULL);
> +		if (!octeon3_eth_sso_pko_cache) {
> +			rv = -ENOMEM;
> +			goto done;
> +		}
> +	}
> +
> +	rv = octeon_fpa3_mem_fill(node, octeon3_eth_sso_pko_cache,
> +				  oen->sso_aura, 1024);
> +	if (rv)
> +		goto done;
> +
> +	rv = octeon_fpa3_mem_fill(node, octeon3_eth_sso_pko_cache,
> +				  oen->pko_aura, 1024);
> +	if (rv)
> +		goto done;
> +
> +	rv = octeon3_sso_init(node, oen->sso_aura);
> +	if (rv)
> +		goto done;
> +
> +	oen->tx_complete_grp = octeon3_sso_alloc_grp(node, -1);
> +	if (oen->tx_complete_grp < 0)
> +		goto done;
> +
> +	sso_intsn = SSO_INTSN_EXE << 12 | oen->tx_complete_grp;
> +	oen->tx_irq = irq_create_mapping(NULL, sso_intsn);
> +	if (!oen->tx_irq) {
> +		rv = -ENODEV;
> +		goto done;
> +	}
> +
> +	rv = octeon3_pko_init_global(node, oen->pko_aura);
> +	if (rv) {
> +		rv = -ENODEV;
> +		goto done;
> +	}
> +
> +	octeon3_pki_vlan_init(node);
> +	octeon3_pki_cluster_init(node, pdev);
> +	octeon3_pki_ltype_init(node);
> +	octeon3_pki_enable(node);
> +
> +	for (i = 0; i < ARRAY_SIZE(oen->workers); i++) {
> +		oen->workers[i].oen = oen;
> +		init_waitqueue_head(&oen->workers[i].queue);
> +		oen->workers[i].order = i;
> +	}
> +	for (i = 0; i < ARRAY_SIZE(oen->workers); i++) {
> +		oen->workers[i].task = kthread_create_on_node(octeon3_eth_tx_complete_worker,
> +							      oen->workers + i, node,
> +							      "oct3_eth/%d:%d", node, i);
> +		if (IS_ERR(oen->workers[i].task)) {
> +			rv = PTR_ERR(oen->workers[i].task);
> +			goto done;
> +		} else {
> +#ifdef CONFIG_NUMA
> +			set_cpus_allowed_ptr(oen->workers[i].task, cpumask_of_node(node));
> +#endif
> +			wake_up_process(oen->workers[i].task);
> +		}
> +	}
> +
> +	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
> +		octeon3_sso_pass1_limit(node, oen->tx_complete_grp);
> +
> +	rv = request_irq(oen->tx_irq, octeon3_eth_tx_handler,
> +			 IRQ_TYPE_EDGE_RISING, "oct3_eth_tx_done", oen);
> +	if (rv)
> +		goto done;
> +	octeon3_eth_gen_affinity(node, &oen->tx_affinity_hint);
> +	irq_set_affinity_hint(oen->tx_irq, &oen->tx_affinity_hint);
> +
> +	octeon3_sso_irq_set(node, oen->tx_complete_grp, true);
> +
> +	oen->init_done = true;
> +done:
> +	mutex_unlock(&octeon3_eth_init_mutex);
> +	return rv;
> +}
> +
> +static struct sk_buff *octeon3_eth_work_to_skb(void *w)
> +{
> +	struct sk_buff *skb;
> +	void **f = w;
> +
> +	skb = f[-16];
> +	return skb;
> +}
> +
> +/* Receive one packet.
> + * returns the number of RX buffers consumed.
> + */
> +static int octeon3_eth_rx_one(struct octeon3_rx *rx, bool is_async, bool req_next)
> +{
> +	int segments;
> +	int ret;
> +	unsigned int packet_len;
> +	struct wqe *work;
> +	u8 *data;
> +	int len_remaining;
> +	struct sk_buff *skb;
> +	union buf_ptr packet_ptr;
> +	struct wr_ret r;
> +	struct octeon3_ethernet *priv = rx->parent;
> +
> +	if (is_async)
> +		r = octeon3_core_get_response_async();
> +	else
> +		r = octeon3_core_get_work_sync(rx->rx_grp);
> +	work = r.work;
> +	if (!work)
> +		return 0;
> +
> +	/* Request the next work so it'll be ready when we need it */
> +	if (is_async && req_next)
> +		octeon3_core_get_work_async(rx->rx_grp);
> +
> +	skb = octeon3_eth_work_to_skb(work);
> +
> +	segments = work->word0.bufs;
> +	ret = segments;
> +	packet_ptr = work->packet_ptr;
> +	if (unlikely(work->word2.err_level <= PKI_ERRLEV_LA &&
> +		     work->word2.err_code != PKI_OPCODE_NONE)) {
> +		atomic64_inc(&priv->rx_errors);
> +		switch (work->word2.err_code) {
> +		case PKI_OPCODE_JABBER:
> +			atomic64_inc(&priv->rx_length_errors);
> +			break;
> +		case PKI_OPCODE_FCS:
> +			atomic64_inc(&priv->rx_crc_errors);
> +			break;
> +		}
> +		data = phys_to_virt(packet_ptr.addr);
> +		for (;;) {
> +			dev_kfree_skb_any(skb);
> +			segments--;
> +			if (segments <= 0)
> +				break;
> +			packet_ptr.u64 = *(u64 *)(data - 8);
> +#ifndef __LITTLE_ENDIAN
> +			if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
> +				/* PKI_BUFLINK_S's are endian-swapped */
> +				packet_ptr.u64 = swab64(packet_ptr.u64);
> +			}
> +#endif
> +			data = phys_to_virt(packet_ptr.addr);
> +			skb = octeon3_eth_work_to_skb((void *)round_down((unsigned long)data, 128ull));
> +		}
> +		goto out;
> +	}
> +
> +	packet_len = work->word1.len;
> +	data = phys_to_virt(packet_ptr.addr);
> +	skb->data = data;
> +	skb->len = packet_len;
> +	len_remaining = packet_len;
> +	if (segments == 1) {
> +		/* Strip the ethernet fcs */
> +		skb->len -= 4;
> +		skb_set_tail_pointer(skb, skb->len);
> +	} else {
> +		bool first_frag = true;
> +		struct sk_buff *current_skb = skb;
> +		struct sk_buff *next_skb = NULL;
> +		unsigned int segment_size;
> +
> +		skb_frag_list_init(skb);
> +		for (;;) {
> +			segment_size = (segments == 1) ? len_remaining : packet_ptr.size;
> +			len_remaining -= segment_size;
> +			if (!first_frag) {
> +				current_skb->len = segment_size;
> +				skb->data_len += segment_size;
> +				skb->truesize += current_skb->truesize;
> +			}
> +			skb_set_tail_pointer(current_skb, segment_size);
> +			segments--;
> +			if (segments == 0)
> +				break;
> +			packet_ptr.u64 = *(u64 *)(data - 8);
> +#ifndef __LITTLE_ENDIAN
> +			if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
> +				/* PKI_BUFLINK_S's are endian-swapped */
> +				packet_ptr.u64 = swab64(packet_ptr.u64);
> +			}
> +#endif
> +			data = phys_to_virt(packet_ptr.addr);
> +			next_skb = octeon3_eth_work_to_skb((void *)round_down((unsigned long)data, 128ull));
> +			if (first_frag) {
> +				next_skb->next = skb_shinfo(current_skb)->frag_list;
> +				skb_shinfo(current_skb)->frag_list = next_skb;
> +			} else {
> +				current_skb->next = next_skb;
> +				next_skb->next = NULL;
> +			}
> +			current_skb = next_skb;
> +			first_frag = false;
> +			current_skb->data = data;
> +		}
> +
> +		/* Strip the ethernet fcs */
> +		pskb_trim(skb, skb->len - 4);
> +	}
> +
> +	if (likely(priv->netdev->flags & IFF_UP)) {
> +		skb_checksum_none_assert(skb);
> +		if (unlikely(priv->rx_timestamp_hw)) {
> +			/* The first 8 bytes are the timestamp */
> +			u64 hwts = *(u64 *)skb->data;
> +			u64 ns;
> +			struct skb_shared_hwtstamps *shts;
> +
> +			ns = timecounter_cyc2time(&priv->tc, hwts);
> +			shts = skb_hwtstamps(skb);
> +			memset(shts, 0, sizeof(*shts));
> +			shts->hwtstamp = ns_to_ktime(ns);
> +			__skb_pull(skb, 8);
> +		}
> +
> +		skb->protocol = eth_type_trans(skb, priv->netdev);
> +		skb->dev = priv->netdev;
> +		if (priv->netdev->features & NETIF_F_RXCSUM) {
> +			if ((work->word2.lc_hdr_type == PKI_LTYPE_IP4 ||
> +			     work->word2.lc_hdr_type == PKI_LTYPE_IP6) &&
> +			    (work->word2.lf_hdr_type == PKI_LTYPE_TCP ||
> +			     work->word2.lf_hdr_type == PKI_LTYPE_UDP ||
> +			     work->word2.lf_hdr_type == PKI_LTYPE_SCTP))
> +				if (work->word2.err_code == 0)
> +					skb->ip_summed = CHECKSUM_UNNECESSARY;
> +		}
> +
> +		napi_gro_receive(&rx->napi, skb);
> +	} else {
> +		/* Drop any packet received for a device that isn't up */

If that happens, is not that a blatant indication that there is a bug in
how the interface is brought down?

> +		atomic64_inc(&priv->rx_dropped);
> +		dev_kfree_skb_any(skb);
> +	}
> +out:
> +	return ret;
> +}
> +
> +static int octeon3_eth_napi(struct napi_struct *napi, int budget)
> +{
> +	int rx_count = 0;
> +	struct octeon3_rx *cxt;
> +	struct octeon3_ethernet *priv;
> +	u64 aq_cnt;
> +	int n = 0;
> +	int n_bufs = 0;
> +	u64 old_scratch;
> +
> +	cxt = container_of(napi, struct octeon3_rx, napi);
> +	priv = cxt->parent;
> +
> +	/* Get the amount of work pending */
> +	aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(priv->node, cxt->rx_grp));
> +	aq_cnt &= GENMASK_ULL(32, 0);
> +
> +	if (likely(USE_ASYNC_IOBDMA)) {
> +		/* Save scratch in case userspace is using it */
> +		CVMX_SYNCIOBDMA;
> +		old_scratch = scratch_read64(SCR_SCRATCH);
> +
> +		octeon3_core_get_work_async(cxt->rx_grp);
> +	}
> +
> +	while (rx_count < budget) {
> +		n = 0;
> +
> +		if (likely(USE_ASYNC_IOBDMA)) {
> +			bool req_next = rx_count < (budget - 1) ? true : false;
> +
> +			n = octeon3_eth_rx_one(cxt, true, req_next);
> +		} else {
> +			n = octeon3_eth_rx_one(cxt, false, false);
> +		}
> +
> +		if (n == 0)
> +			break;
> +
> +		n_bufs += n;
> +		rx_count++;
> +	}
> +
> +	/* Wake up worker threads */
> +	n_bufs = atomic64_add_return(n_bufs, &priv->buffers_needed);
> +	if (n_bufs >= 32) {
> +		struct octeon3_ethernet_node *oen;
> +
> +		oen = octeon3_eth_node + priv->node;
> +		atomic_set(&oen->workers[0].kick, 1);
> +		wake_up(&oen->workers[0].queue);
> +	}
> +
> +	/* Stop the thread when no work is pending */
> +	if (rx_count < budget) {
> +		napi_complete(napi);
> +		octeon3_sso_irq_set(cxt->parent->node, cxt->rx_grp, true);
> +	}
> +
> +	if (likely(USE_ASYNC_IOBDMA)) {
> +		/* Restore the scratch area */
> +		scratch_write64(SCR_SCRATCH, old_scratch);
> +	}
> +
> +	return rx_count;
> +}
> +
> +#undef BROKEN_SIMULATOR_CSUM
> +
> +static void ethtool_get_drvinfo(struct net_device *netdev,
> +				struct ethtool_drvinfo *info)
> +{
> +	strcpy(info->driver, "octeon3-ethernet");
> +	strcpy(info->version, "1.0");
> +	strcpy(info->bus_info, "Builtin");

I believe the correct way to specify that type of bus is to use "platform".

[snip]

> +static int octeon3_eth_common_ndo_stop(struct net_device *netdev)
> +{
> +	struct octeon3_ethernet *priv = netdev_priv(netdev);
> +	void **w;
> +	struct sk_buff *skb;
> +	struct octeon3_rx *rx;
> +	int i;
> +
> +	/* Allow enough time for ingress in transit packets to be drained */
> +	msleep(20);

Can you find a better way to do that? You can put a hard disable on the
hardware, and then wait until a particular condition to indicate full
drainage?

[snip]

> +static int octeon3_eth_ndo_start_xmit(struct sk_buff *skb,
> +				      struct net_device *netdev)
> +{
> +	struct sk_buff *skb_tmp;
> +	struct octeon3_ethernet *priv = netdev_priv(netdev);
> +	u64 scr_off = LMTDMA_SCR_OFFSET;
> +	u64 pko_send_desc;
> +	u64 lmtdma_data;
> +	u64 aq_cnt = 0;
> +	struct octeon3_ethernet_node *oen;
> +	long backlog;
> +	int frag_count;
> +	u64 head_len;
> +	int i;
> +	u64 *dma_addr;

dma_addr_t?

> +	void **work;
> +	unsigned int mss;
> +	int grp;
> +
> +	frag_count = 0;
> +	if (skb_has_frag_list(skb))
> +		skb_walk_frags(skb, skb_tmp)
> +			frag_count++;
> +
> +	/* Stop the queue if pko or sso are not keeping up */
> +	oen = octeon3_eth_node + priv->node;
> +	aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(oen->node, oen->tx_complete_grp));
> +	aq_cnt &= GENMASK_ULL(32, 0);
> +	backlog = atomic64_inc_return(&priv->tx_backlog);
> +	if (unlikely(backlog > MAX_TX_QUEUE_DEPTH || aq_cnt > 100000))
> +		netif_stop_queue(netdev);
> +
> +	/* We have space for 11 segment pointers, If there will be
> +	 * more than that, we must linearize.  The count is: 1 (base
> +	 * SKB) + frag_count + nr_frags.
> +	 */
> +	if (unlikely(skb_shinfo(skb)->nr_frags + frag_count > 10)) {
> +		if (unlikely(__skb_linearize(skb)))
> +			goto skip_xmit;
> +		frag_count = 0;
> +	}

What's so special about 10? The maximum the network stack could pass is
SKB_MAX_FRAGS, what would happen in that case?

> +
> +	work = (void **)skb->cb;
> +	work[0] = netdev;
> +	work[1] = NULL;
> +
> +	/* Adjust the port statistics. */
> +	atomic64_inc(&priv->tx_packets);
> +	atomic64_add(skb->len, &priv->tx_octets);

Do this in the TX completion worker, there is no guarantee the packet
will be transmitted that early in this function.

> +
> +	/* Make sure packet data writes are committed before
> +	 * submitting the command below
> +	 */
> +	wmb();

That seems just wrong here, if your goal is to make sure that e.g:
skb_linearize() did finish its pending writes to DRAM, you need to use
DMA-API towards that goal. If the device is cache coherent, DMA-API will
know that and do nothing.

> +
> +	/* Build the pko command */
> +	pko_send_desc = build_pko_send_hdr_desc(skb);
> +	preempt_disable();

Why do you disable preemption here?

> +	scratch_write64(scr_off, pko_send_desc);
> +	scr_off += sizeof(pko_send_desc);
> +
> +	/* Request packet to be ptp timestamped */
> +	if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
> +	    unlikely(priv->tx_timestamp_hw)) {
> +		pko_send_desc = build_pko_send_ext_desc(skb);
> +		scratch_write64(scr_off, pko_send_desc);
> +		scr_off += sizeof(pko_send_desc);
> +	}
> +
> +	/* Add the tso descriptor if needed */
> +	mss = skb_shinfo(skb)->gso_size;
> +	if (unlikely(mss)) {
> +		pko_send_desc = build_pko_send_tso(skb, netdev->mtu);
> +		scratch_write64(scr_off, pko_send_desc);
> +		scr_off += sizeof(pko_send_desc);
> +	}
> +
> +	/* Add a gather descriptor for each segment. See PKO_SEND_GATHER_S for
> +	 * the send gather descriptor format.
> +	 */
> +	pko_send_desc = 0;
> +	pko_send_desc |= (u64)PKO_SENDSUBDC_GATHER << 45;
> +	head_len = skb_headlen(skb);
> +	if (head_len > 0) {
> +		pko_send_desc |= head_len << 48;
> +		pko_send_desc |= virt_to_phys(skb->data);
> +		scratch_write64(scr_off, pko_send_desc);
> +		scr_off += sizeof(pko_send_desc);
> +	}
> +	for (i = 1; i <= skb_shinfo(skb)->nr_frags; i++) {
> +		struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i - 1;
> +
> +		pko_send_desc &= ~(GENMASK_ULL(63, 48) | GENMASK_ULL(41, 0));
> +		pko_send_desc |= (u64)fs->size << 48;
> +		pko_send_desc |= virt_to_phys((u8 *)page_address(fs->page.p) + fs->page_offset);
> +		scratch_write64(scr_off, pko_send_desc);
> +		scr_off += sizeof(pko_send_desc);
> +	}
> +	skb_walk_frags(skb, skb_tmp) {
> +		pko_send_desc &= ~(GENMASK_ULL(63, 48) | GENMASK_ULL(41, 0));
> +		pko_send_desc |= (u64)skb_tmp->len << 48;
> +		pko_send_desc |= virt_to_phys(skb_tmp->data);
> +		scratch_write64(scr_off, pko_send_desc);
> +		scr_off += sizeof(pko_send_desc);
> +	}
> +
> +	/* Subtract 1 from the tx_backlog. */
> +	pko_send_desc = build_pko_send_mem_sub(virt_to_phys(&priv->tx_backlog));
> +	scratch_write64(scr_off, pko_send_desc);
> +	scr_off += sizeof(pko_send_desc);
> +
> +	/* Write the ptp timestamp in the skb itself */
> +	if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
> +	    unlikely(priv->tx_timestamp_hw)) {
> +		pko_send_desc = build_pko_send_mem_ts(virt_to_phys(&work[1]));
> +		scratch_write64(scr_off, pko_send_desc);
> +		scr_off += sizeof(pko_send_desc);
> +	}
> +
> +	/* Send work when finished with the packet. */
> +	grp = octeon3_eth_lgrp_to_ggrp(priv->node, priv->tx_complete_grp);
> +	pko_send_desc = build_pko_send_work(grp, virt_to_phys(work));
> +	scratch_write64(scr_off, pko_send_desc);
> +	scr_off += sizeof(pko_send_desc);
> +
> +	/* See PKO_SEND_DMA_S in the HRM for the lmtdam data format */
> +	lmtdma_data = 0;
> +	lmtdma_data |= (u64)(LMTDMA_SCR_OFFSET >> 3) << 56;
> +	if (wait_pko_response)
> +		lmtdma_data |= 1ull << 48;
> +	lmtdma_data |= 0x51ull << 40;
> +	lmtdma_data |= (u64)priv->node << 36;
> +	lmtdma_data |= priv->pko_queue << 16;
> +
> +	dma_addr = (u64 *)(LMTDMA_ORDERED_IO_ADDR | ((scr_off & 0x78) - 8));
> +	*dma_addr = lmtdma_data;
> +
> +	preempt_enable();
> +
> +	if (wait_pko_response) {
> +		u64	query_rtn;
> +
> +		CVMX_SYNCIOBDMA;
> +
> +		/* See PKO_QUERY_RTN_S in the HRM for the return format */
> +		query_rtn = scratch_read64(LMTDMA_SCR_OFFSET);
> +		query_rtn >>= 60;
> +		if (unlikely(query_rtn != PKO_DQSTATUS_PASS)) {
> +			netdev_err(netdev, "PKO enqueue failed %llx\n",
> +				   (unsigned long long)query_rtn);
> +			dev_kfree_skb_any(skb);
> +		}
> +	}

So I am not sure I fully understand how sending packets works, although
it seems to be like you are building a work element (pko_send_desc)
which references either a full-size Ethernet frame, or that frame and
its fragments (multiple pko_send_desc). In that case, I don't see why
you can't juse dma_map_single()/dma_unmap_single() against skb->data and
its potential fragments instead of using virt_to_phys() like you
currently do, which is absolutely not portable.

dma_map_single() on the kernel linear address space should be equivalent
to virt_to_phys() anyway, and you would get the nice things about
DMA-API like its portability.

I could imagine that, for coherency purposes, there may be a requirement
to keep tskb->data and frieds to be within XKSEG0/1, if that's the case,
DMA-API should know that too.

I might be completely off, but using virt_to_phys() sure does sound non
portable here.

> +
> +	return NETDEV_TX_OK;
> +skip_xmit:
> +	atomic64_inc(&priv->tx_dropped);
> +	dev_kfree_skb_any(skb);
> +	return NETDEV_TX_OK;
> +}
> +
> +static void octeon3_eth_ndo_get_stats64(struct net_device *netdev,
> +					struct rtnl_link_stats64 *s)
> +{
> +	struct octeon3_ethernet *priv = netdev_priv(netdev);
> +	u64 packets, octets, dropped;
> +	u64 delta_packets, delta_octets, delta_dropped;
> +
> +	spin_lock(&priv->stat_lock);

Consider using u64_stats_sync to get rid of this lock...

> +
> +	octeon3_pki_get_stats(priv->node, priv->pknd, &packets, &octets, &dropped);
> +
> +	delta_packets = (packets - priv->last_packets) & ((1ull << 48) - 1);
> +	delta_octets = (octets - priv->last_octets) & ((1ull << 48) - 1);
> +	delta_dropped = (dropped - priv->last_dropped) & ((1ull << 48) - 1);
> +
> +	priv->last_packets = packets;
> +	priv->last_octets = octets;
> +	priv->last_dropped = dropped;
> +
> +	spin_unlock(&priv->stat_lock);
> +
> +	atomic64_add(delta_packets, &priv->rx_packets);
> +	atomic64_add(delta_octets, &priv->rx_octets);
> +	atomic64_add(delta_dropped, &priv->rx_dropped);

and summing up these things as well.

> +
> +	s->rx_packets = atomic64_read(&priv->rx_packets);
> +	s->rx_bytes = atomic64_read(&priv->rx_octets);
> +	s->rx_dropped = atomic64_read(&priv->rx_dropped);
> +	s->rx_errors = atomic64_read(&priv->rx_errors);
> +	s->rx_length_errors = atomic64_read(&priv->rx_length_errors);
> +	s->rx_crc_errors = atomic64_read(&priv->rx_crc_errors);
> +
> +	s->tx_packets = atomic64_read(&priv->tx_packets);
> +	s->tx_bytes = atomic64_read(&priv->tx_octets);
> +	s->tx_dropped = atomic64_read(&priv->tx_dropped);
> +}

[snip]

> +enum port_mode {
> +	PORT_MODE_DISABLED,
> +	PORT_MODE_SGMII,
> +	PORT_MODE_RGMII,
> +	PORT_MODE_XAUI,
> +	PORT_MODE_RXAUI,
> +	PORT_MODE_XLAUI,
> +	PORT_MODE_XFI,
> +	PORT_MODE_10G_KR,
> +	PORT_MODE_40G_KR4
> +};

Can you use phy_interface_t values for this?

> +
> +enum lane_mode {
> +	R_25G_REFCLK100,
> +	R_5G_REFCLK100,
> +	R_8G_REFCLK100,
> +	R_125G_REFCLK15625_KX,
> +	R_3125G_REFCLK15625_XAUI,
> +	R_103125G_REFCLK15625_KR,
> +	R_125G_REFCLK15625_SGMII,
> +	R_5G_REFCLK15625_QSGMII,
> +	R_625G_REFCLK15625_RXAUI,
> +	R_25G_REFCLK125,
> +	R_5G_REFCLK125,
> +	R_8G_REFCLK125
> +};
> +
> +struct port_status {
> +	int	link;
> +	int	duplex;
> +	int	speed;
> +};

Likewise, using phy_device would give you this information.
David Daney Nov. 2, 2017, 10:45 p.m. UTC | #9 
On 11/02/2017 12:13 PM, Florian Fainelli wrote:
> On 11/01/2017 05:36 PM, David Daney wrote:
>> From: Carlos Munoz <cmunoz@cavium.com>
>>
>> The Cavium OCTEON cn78xx and cn73xx SoCs have network packet I/O
>> hardware that is significantly different from previous generations of
>> the family.
>>
>> Add a new driver for this hardware.  The Ethernet MAC is called BGX on
>> these devices.  Common code for the MAC is in octeon3-bgx-port.c.
>> Four of these BGX MACs are grouped together and managed as a group by
>> octeon3-bgx-nexus.c.  Ingress packet classification is done by the PKI
>> unit initialized in octeon3-pki.c.  Queue management is done in the
>> SSO, initialized by octeon3-sso.c.  Egress is handled by the PKO,
>> initialized in octeon3-pko.c.
>>
>> Signed-off-by: Carlos Munoz <cmunoz@cavium.com>
>> Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
>> Signed-off-by: David Daney <david.daney@cavium.com>
>> ---
> 
>> +static char *mix_port;
>> +module_param(mix_port, charp, 0444);
>> +MODULE_PARM_DESC(mix_port, "Specifies which ports connect to MIX interfaces.");
> 
> Can you derive this from Device Tree /platform data configuration?
> 
>> +
>> +static char *pki_port;
>> +module_param(pki_port, charp, 0444);
>> +MODULE_PARM_DESC(pki_port, "Specifies which ports connect to the PKI.");
> 
> Likewise

The SoC is flexible in how it is configured.  Technically the device 
tree should only be used to specify information about the physical 
configuration of the system that cannot be probed for, and this is about 
policy rather that physical wiring.  That said, we do take the default 
configuration from the device tree, but give the option here to override 
via the module command line.

> 
>> +
>> +#define MAX_MIX_PER_NODE	2
>> +
>> +#define MAX_MIX			(MAX_NODES * MAX_MIX_PER_NODE)
>> +
>> +/**
>> + * struct mix_port_lmac - Describes a lmac that connects to a mix
>> + *			  port. The lmac must be on the same node as
>> + *			  the mix.
>> + * @node:	Node of the lmac.
>> + * @bgx:	Bgx of the lmac.
>> + * @lmac:	Lmac index.
>> + */
>> +struct mix_port_lmac {
>> +	int	node;
>> +	int	bgx;
>> +	int	lmac;
>> +};
>> +
>> +/* mix_ports_lmacs contains all the lmacs connected to mix ports */
>> +static struct mix_port_lmac mix_port_lmacs[MAX_MIX];
>> +
>> +/* pki_ports keeps track of the lmacs connected to the pki */
>> +static bool pki_ports[MAX_NODES][MAX_BGX_PER_NODE][MAX_LMAC_PER_BGX];
>> +
>> +/* Created platform devices get added to this list */
>> +static struct list_head pdev_list;
>> +static struct mutex pdev_list_lock;
>> +
>> +/* Created platform device use this structure to add themselves to the list */
>> +struct pdev_list_item {
>> +	struct list_head	list;
>> +	struct platform_device	*pdev;
>> +};
> 
> Don't you have a top-level platform device that you could use which
> would hold this data instead of having it here?

This is the top-level platform device.


> 
> [snip]
> 
>> +/* Registers are accessed via xkphys */
>> +#define SSO_BASE			0x1670000000000ull
>> +#define SSO_ADDR(node)			(SET_XKPHYS + NODE_OFFSET(node) +      \
>> +					 SSO_BASE)
>> +#define GRP_OFFSET(grp)			((grp) << 16)
>> +#define GRP_ADDR(n, g)			(SSO_ADDR(n) + GRP_OFFSET(g))
>> +#define SSO_GRP_AQ_CNT(n, g)		(GRP_ADDR(n, g)		   + 0x20000700)
>> +
>> +#define MIO_PTP_BASE			0x1070000000000ull
>> +#define MIO_PTP_ADDR(node)		(SET_XKPHYS + NODE_OFFSET(node) +      \
>> +					 MIO_PTP_BASE)
>> +#define MIO_PTP_CLOCK_CFG(node)		(MIO_PTP_ADDR(node)		+ 0xf00)
>> +#define MIO_PTP_CLOCK_HI(node)		(MIO_PTP_ADDR(node)		+ 0xf10)
>> +#define MIO_PTP_CLOCK_COMP(node)	(MIO_PTP_ADDR(node)		+ 0xf18)
> 
> I am sure this will work great on anything but MIPS64 ;)

Sarcasm duly noted.

That said, by definition it is exactly an OCTEON-III/MIPS64, and can 
never be anything else.  It is known a priori that the hardware and this 
driver will never be used anywhere else.

> 
>> +
>> +struct octeon3_ethernet;
>> +
>> +struct octeon3_rx {
>> +	struct napi_struct	napi;
>> +	struct octeon3_ethernet *parent;
>> +	int rx_grp;
>> +	int rx_irq;
>> +	cpumask_t rx_affinity_hint;
>> +} ____cacheline_aligned_in_smp;
>> +
>> +struct octeon3_ethernet {
>> +	struct bgx_port_netdev_priv bgx_priv; /* Must be first element. */
>> +	struct list_head list;
>> +	struct net_device *netdev;
>> +	enum octeon3_mac_type mac_type;
>> +	struct octeon3_rx rx_cxt[MAX_RX_QUEUES];
>> +	struct ptp_clock_info ptp_info;
>> +	struct ptp_clock *ptp_clock;
>> +	struct cyclecounter cc;
>> +	struct timecounter tc;
>> +	spinlock_t ptp_lock;		/* Serialize ptp clock adjustments */
>> +	int num_rx_cxt;
>> +	int pki_aura;
>> +	int pknd;
>> +	int pko_queue;
>> +	int node;
>> +	int interface;
>> +	int index;
>> +	int rx_buf_count;
>> +	int tx_complete_grp;
>> +	int rx_timestamp_hw:1;
>> +	int tx_timestamp_hw:1;
>> +	spinlock_t stat_lock;		/* Protects stats counters */
>> +	u64 last_packets;
>> +	u64 last_octets;
>> +	u64 last_dropped;
>> +	atomic64_t rx_packets;
>> +	atomic64_t rx_octets;
>> +	atomic64_t rx_dropped;
>> +	atomic64_t rx_errors;
>> +	atomic64_t rx_length_errors;
>> +	atomic64_t rx_crc_errors;
>> +	atomic64_t tx_packets;
>> +	atomic64_t tx_octets;
>> +	atomic64_t tx_dropped;
> 
> Do you really need those to be truly atomic64_t types, can't you use u64
> and use the helpers from u64_stats_sync.h? That should be good enough?

There is room for improvement here.  We probably need to keep statistics 
per queue, and then the atomic business would be unnecessary.


> 
>> +	/* The following two fields need to be on a different cache line as
>> +	 * they are updated by pko which invalidates the cache every time it
>> +	 * updates them. The idea is to prevent other fields from being
>> +	 * invalidated unnecessarily.
>> +	 */
>> +	char cacheline_pad1[CVMX_CACHE_LINE_SIZE];
>> +	atomic64_t buffers_needed;
>> +	atomic64_t tx_backlog;
>> +	char cacheline_pad2[CVMX_CACHE_LINE_SIZE];
>> +};
>> +
>> +static DEFINE_MUTEX(octeon3_eth_init_mutex);
>> +
>> +struct octeon3_ethernet_node;
>> +
>> +struct octeon3_ethernet_worker {
>> +	wait_queue_head_t queue;
>> +	struct task_struct *task;
>> +	struct octeon3_ethernet_node *oen;
>> +	atomic_t kick;
>> +	int order;
>> +};
>> +
>> +struct octeon3_ethernet_node {
>> +	bool init_done;
>> +	int next_cpu_irq_affinity;
>> +	int node;
>> +	int pki_packet_pool;
>> +	int sso_pool;
>> +	int pko_pool;
>> +	void *sso_pool_stack;
>> +	void *pko_pool_stack;
>> +	void *pki_packet_pool_stack;
>> +	int sso_aura;
>> +	int pko_aura;
>> +	int tx_complete_grp;
>> +	int tx_irq;
>> +	cpumask_t tx_affinity_hint;
>> +	struct octeon3_ethernet_worker workers[8];
>> +	struct mutex device_list_lock;	/* Protects the device list */
>> +	struct list_head device_list;
>> +	spinlock_t napi_alloc_lock;	/* Protects napi allocations */
>> +};
>> +
>> +static int wait_pko_response;
>> +module_param(wait_pko_response, int, 0644);
>> +MODULE_PARM_DESC(wait_pko_response, "Wait for response after each pko command.");
> 
> Under which circumstances is this used?

Rarely if ever, I think I will remove it.

> 
>> +
>> +static int num_packet_buffers = 768;
>> +module_param(num_packet_buffers, int, 0444);
>> +MODULE_PARM_DESC(num_packet_buffers,
>> +		 "Number of packet buffers to allocate per port.");
> 
> Consider implementing ethtool -g/G for this.

That may be work for a follow-on patch.

> 
>> +
>> +static int packet_buffer_size = 2048;
>> +module_param(packet_buffer_size, int, 0444);
>> +MODULE_PARM_DESC(packet_buffer_size, "Size of each RX packet buffer.");
> 
> How is that different from adjusting the network device's MTU?

Multiple buffers may be linked together creating a fragmented packet for 
MTU greater than packet_buffer_size.

MTU controls which packets are rejected because they are too large.
packet_buffer_size is the size of the RX buffers.


> 
>> +
>> +static int rx_queues = 1;
>> +module_param(rx_queues, int, 0444);
>> +MODULE_PARM_DESC(rx_queues, "Number of RX threads per port.");
> 
> Same thing, can you consider using an ethtool knob for that?

Also may be work for a follow-on patch.

> 
>> +
>> +int ilk0_lanes = 1;
>> +module_param(ilk0_lanes, int, 0444);
>> +MODULE_PARM_DESC(ilk0_lanes, "Number of SerDes lanes used by ILK link 0.");
>> +
>> +int ilk1_lanes = 1;
>> +module_param(ilk1_lanes, int, 0444);
>> +MODULE_PARM_DESC(ilk1_lanes, "Number of SerDes lanes used by ILK link 1.");
>> +
>> +static struct octeon3_ethernet_node octeon3_eth_node[MAX_NODES];
>> +static struct kmem_cache *octeon3_eth_sso_pko_cache;
>> +
>> +/**
>> + * Reads a 64 bit value from the processor local scratchpad memory.
>> + *
>> + * @param offset byte offset into scratch pad to read
>> + *
>> + * @return value read
>> + */
>> +static inline u64 scratch_read64(u64 offset)
>> +{
>> +	return *(u64 *)((long)SCRATCH_BASE + offset);
>> +}
> 
> No barriers needed whatsoever?

Nope.

> 
>> +
>> +/**
>> + * Write a 64 bit value to the processor local scratchpad memory.
>> + *
>> + * @param offset byte offset into scratch pad to write
>> + @ @praram value to write
>> + */
>> +static inline void scratch_write64(u64 offset, u64 value)
>> +{
>> +	*(u64 *)((long)SCRATCH_BASE + offset) = value;
>> +}
>> +
>> +static int get_pki_chan(int node, int interface, int index)
>> +{
>> +	int	pki_chan;
>> +
>> +	pki_chan = node << 12;
>> +
>> +	if (OCTEON_IS_MODEL(OCTEON_CNF75XX) &&
>> +	    (interface == 1 || interface == 2)) {
>> +		/* SRIO */
>> +		pki_chan |= 0x240 + (2 * (interface - 1)) + index;
>> +	} else {
>> +		/* BGX */
>> +		pki_chan |= 0x800 + (0x100 * interface) + (0x10 * index);
>> +	}
>> +
>> +	return pki_chan;
>> +}
>> +
>> +/* Map auras to the field priv->buffers_needed. Used to speed up packet
>> + * transmission.
>> + */
>> +static void *aura2bufs_needed[MAX_NODES][FPA3_NUM_AURAS];
>> +
>> +static int octeon3_eth_lgrp_to_ggrp(int node, int grp)
>> +{
>> +	return (node << 8) | grp;
>> +}
>> +
>> +static void octeon3_eth_gen_affinity(int node, cpumask_t *mask)
>> +{
>> +	int cpu;
>> +
>> +	do {
>> +		cpu = cpumask_next(octeon3_eth_node[node].next_cpu_irq_affinity, cpu_online_mask);
>> +		octeon3_eth_node[node].next_cpu_irq_affinity++;
>> +		if (cpu >= nr_cpu_ids) {
>> +			octeon3_eth_node[node].next_cpu_irq_affinity = -1;
>> +			continue;
>> +		}
>> +	} while (false);
>> +	cpumask_clear(mask);
>> +	cpumask_set_cpu(cpu, mask);
>> +}
>> +
>> +struct wr_ret {
>> +	void *work;
>> +	u16 grp;
>> +};
>> +
>> +static inline struct wr_ret octeon3_core_get_work_sync(int grp)
>> +{
>> +	u64		node = cvmx_get_node_num();
>> +	u64		addr;
>> +	u64		response;
>> +	struct wr_ret	r;
>> +
>> +	/* See SSO_GET_WORK_LD_S for the address to read */
>> +	addr = 1ull << 63;
>> +	addr |= BIT(48);
>> +	addr |= DID_TAG_SWTAG << 40;
>> +	addr |= node << 36;
>> +	addr |= BIT(30);
>> +	addr |= BIT(29);
>> +	addr |= octeon3_eth_lgrp_to_ggrp(node, grp) << 4;
>> +	addr |= SSO_NO_WAIT << 3;
>> +	response = __raw_readq((void __iomem *)addr);
>> +
>> +	/* See SSO_GET_WORK_RTN_S for the format of the response */
>> +	r.grp = (response & GENMASK_ULL(57, 48)) >> 48;
>> +	if (response & BIT(63))
>> +		r.work = NULL;
>> +	else
>> +		r.work = phys_to_virt(response & GENMASK_ULL(41, 0));
> 
> There are quite a lot of phys_to_virt() and virt_to_phys() uses
> throughout this driver, this will likely not work on anything but
> MIPS64, so there should be a better way, abstracted to do this, see below.

See above, this is OCTEON-III/MIPS64 only.  More abstractions don't 
solve any problems, and may introduce function calls in the hot path 
with their associated pipeline stalls and branch mispredictions.


> 
>> +
>> +	return r;
>> +}
>> +
>> +/**
>> + * octeon3_core_get_work_async - Request work via a iobdma command. Doesn't wait
>> + *				 for the response.
>> + *
>> + * @grp: Group to request work for.
>> + */
>> +static inline void octeon3_core_get_work_async(unsigned int grp)
>> +{
>> +	u64	data;
>> +	u64	node = cvmx_get_node_num();
>> +
>> +	/* See SSO_GET_WORK_DMA_S for the command structure */
>> +	data = SCR_SCRATCH << 56;
>> +	data |= 1ull << 48;
>> +	data |= DID_TAG_SWTAG << 40;
>> +	data |= node << 36;
>> +	data |= 1ull << 30;
>> +	data |= 1ull << 29;
>> +	data |= octeon3_eth_lgrp_to_ggrp(node, grp) << 4;
>> +	data |= SSO_NO_WAIT << 3;
>> +
>> +	__raw_writeq(data, (void __iomem *)IOBDMA_SENDSINGLE);
>> +}
>> +
>> +/**
>> + * octeon3_core_get_response_async - Read the request work response. Must be
>> + *				     called after calling
>> + *				     octeon3_core_get_work_async().
>> + *
>> + * Returns work queue entry.
>> + */
>> +static inline struct wr_ret octeon3_core_get_response_async(void)
>> +{
>> +	struct wr_ret	r;
>> +	u64		response;
>> +
>> +	CVMX_SYNCIOBDMA;
>> +	response = scratch_read64(SCR_SCRATCH);
>> +
>> +	/* See SSO_GET_WORK_RTN_S for the format of the response */
>> +	r.grp = (response & GENMASK_ULL(57, 48)) >> 48;
>> +	if (response & BIT(63))
>> +		r.work = NULL;
>> +	else
>> +		r.work = phys_to_virt(response & GENMASK_ULL(41, 0));
>> +
>> +	return r;
>> +}
>> +
>> +static void octeon3_eth_replenish_rx(struct octeon3_ethernet *priv, int count)
>> +{
>> +	struct sk_buff *skb;
>> +	int i;
>> +
>> +	for (i = 0; i < count; i++) {
>> +		void **buf;
>> +
>> +		skb = __alloc_skb(packet_buffer_size, GFP_ATOMIC, 0, priv->node);
>> +		if (!skb)
>> +			break;
>> +		buf = (void **)PTR_ALIGN(skb->head, 128);
>> +		buf[SKB_PTR_OFFSET] = skb;
> 
> Can you use build_skb()?

In theory we could, but that would require changing the architecture of 
the driver to use page fragments.  For better or worse, the choice was 
made to use __alloc_skb() instead.


> 
>> +		octeon_fpa3_free(priv->node, priv->pki_aura, buf);
>> +	}
>> +}
>> +
> 
> [snip]
> 
>> +static int octeon3_eth_tx_complete_worker(void *data)
>> +{
>> +	struct octeon3_ethernet_worker *worker = data;
>> +	struct octeon3_ethernet_node *oen = worker->oen;
>> +	int backlog;
>> +	int order = worker->order;
>> +	int tx_complete_stop_thresh = order * 100;
>> +	int backlog_stop_thresh = order == 0 ? 31 : order * 80;
>> +	u64 aq_cnt;
>> +	int i;
>> +
>> +	while (!kthread_should_stop()) {
>> +		wait_event_interruptible(worker->queue, octeon3_eth_tx_complete_runnable(worker));
>> +		atomic_dec_if_positive(&worker->kick); /* clear the flag */
>> +
>> +		do {
>> +			backlog = octeon3_eth_replenish_all(oen);
>> +			for (i = 0; i < 100; i++) {
> 
> Do you really want to bound your TX reclamation worker, all other
> network drivers never bound their napi TX completion task and instead
> reclaim every transmitted buffers.

They are not bounded, just chunked.  Note the outer do loop.

> 
>> +				void **work;
>> +				struct net_device *tx_netdev;
>> +				struct octeon3_ethernet *tx_priv;
>> +				struct sk_buff *skb;
>> +				struct wr_ret r;
>> +
>> +				r = octeon3_core_get_work_sync(oen->tx_complete_grp);
>> +				work = r.work;
>> +				if (!work)
>> +					break;
>> +				tx_netdev = work[0];
>> +				tx_priv = netdev_priv(tx_netdev);
>> +				if (unlikely(netif_queue_stopped(tx_netdev)) &&
>> +				    atomic64_read(&tx_priv->tx_backlog) < MAX_TX_QUEUE_DEPTH)
>> +					netif_wake_queue(tx_netdev);
>> +				skb = container_of((void *)work, struct sk_buff, cb);
>> +				if (unlikely(tx_priv->tx_timestamp_hw) &&
>> +				    unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
>> +					octeon3_eth_tx_complete_hwtstamp(tx_priv, skb);
> 
> This is where you should be incremeting the TX bytes and packets
> statistcs, not in your ndo_start_xmit() like you are currently doing.

See below...

> 
>> +				dev_kfree_skb(skb);
> 
> Consider using dev_consume_skb() to be drop-monitor friendly.

I will look at that.

> 
>> +			}
>> +
>> +			aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(oen->node, oen->tx_complete_grp));
>> +			aq_cnt &= GENMASK_ULL(32, 0);
>> +			if ((backlog > backlog_stop_thresh || aq_cnt > tx_complete_stop_thresh) &&
>> +			    order < ARRAY_SIZE(oen->workers) - 1) {
>> +				atomic_set(&oen->workers[order + 1].kick, 1);
>> +				wake_up(&oen->workers[order + 1].queue);
>> +			}
>> +		} while (!need_resched() &&
>> +			 (backlog > backlog_stop_thresh ||
>> +			  aq_cnt > tx_complete_stop_thresh));
>> +
>> +		cond_resched();
>> +
>> +		if (!octeon3_eth_tx_complete_runnable(worker))
>> +			octeon3_sso_irq_set(oen->node, oen->tx_complete_grp, true);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static irqreturn_t octeon3_eth_tx_handler(int irq, void *info)
>> +{
>> +	struct octeon3_ethernet_node *oen = info;
>> +	/* Disarm the irq. */
>> +	octeon3_sso_irq_set(oen->node, oen->tx_complete_grp, false);
>> +	atomic_set(&oen->workers[0].kick, 1);
>> +	wake_up(&oen->workers[0].queue);
> 
> Can you move the whole worker to a NAPI context/softirq context?

This could be an enhancement.

> 
>> +	return IRQ_HANDLED;
>> +}
>> +
[...]

>> +
>> +		/* Strip the ethernet fcs */
>> +		pskb_trim(skb, skb->len - 4);
>> +	}
>> +
>> +	if (likely(priv->netdev->flags & IFF_UP)) {
>> +		skb_checksum_none_assert(skb);
>> +		if (unlikely(priv->rx_timestamp_hw)) {
>> +			/* The first 8 bytes are the timestamp */
>> +			u64 hwts = *(u64 *)skb->data;
>> +			u64 ns;
>> +			struct skb_shared_hwtstamps *shts;
>> +
>> +			ns = timecounter_cyc2time(&priv->tc, hwts);
>> +			shts = skb_hwtstamps(skb);
>> +			memset(shts, 0, sizeof(*shts));
>> +			shts->hwtstamp = ns_to_ktime(ns);
>> +			__skb_pull(skb, 8);
>> +		}
>> +
>> +		skb->protocol = eth_type_trans(skb, priv->netdev);
>> +		skb->dev = priv->netdev;
>> +		if (priv->netdev->features & NETIF_F_RXCSUM) {
>> +			if ((work->word2.lc_hdr_type == PKI_LTYPE_IP4 ||
>> +			     work->word2.lc_hdr_type == PKI_LTYPE_IP6) &&
>> +			    (work->word2.lf_hdr_type == PKI_LTYPE_TCP ||
>> +			     work->word2.lf_hdr_type == PKI_LTYPE_UDP ||
>> +			     work->word2.lf_hdr_type == PKI_LTYPE_SCTP))
>> +				if (work->word2.err_code == 0)
>> +					skb->ip_summed = CHECKSUM_UNNECESSARY;
>> +		}
>> +
>> +		napi_gro_receive(&rx->napi, skb);
>> +	} else {
>> +		/* Drop any packet received for a device that isn't up */
> 
> If that happens, is not that a blatant indication that there is a bug in
> how the interface is brought down?

Yes.  I think we can remove this bit.

> 
>> +		atomic64_inc(&priv->rx_dropped);
>> +		dev_kfree_skb_any(skb);
>> +	}
>> +out:
>> +	return ret;
>> +}
>> +
>> +static int octeon3_eth_napi(struct napi_struct *napi, int budget)
>> +{
>> +	int rx_count = 0;
>> +	struct octeon3_rx *cxt;
>> +	struct octeon3_ethernet *priv;
>> +	u64 aq_cnt;
>> +	int n = 0;
>> +	int n_bufs = 0;
>> +	u64 old_scratch;
>> +
>> +	cxt = container_of(napi, struct octeon3_rx, napi);
>> +	priv = cxt->parent;
>> +
>> +	/* Get the amount of work pending */
>> +	aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(priv->node, cxt->rx_grp));
>> +	aq_cnt &= GENMASK_ULL(32, 0);
>> +
>> +	if (likely(USE_ASYNC_IOBDMA)) {
>> +		/* Save scratch in case userspace is using it */
>> +		CVMX_SYNCIOBDMA;
>> +		old_scratch = scratch_read64(SCR_SCRATCH);
>> +
>> +		octeon3_core_get_work_async(cxt->rx_grp);
>> +	}
>> +
>> +	while (rx_count < budget) {
>> +		n = 0;
>> +
>> +		if (likely(USE_ASYNC_IOBDMA)) {
>> +			bool req_next = rx_count < (budget - 1) ? true : false;
>> +
>> +			n = octeon3_eth_rx_one(cxt, true, req_next);
>> +		} else {
>> +			n = octeon3_eth_rx_one(cxt, false, false);
>> +		}
>> +
>> +		if (n == 0)
>> +			break;
>> +
>> +		n_bufs += n;
>> +		rx_count++;
>> +	}
>> +
>> +	/* Wake up worker threads */
>> +	n_bufs = atomic64_add_return(n_bufs, &priv->buffers_needed);
>> +	if (n_bufs >= 32) {
>> +		struct octeon3_ethernet_node *oen;
>> +
>> +		oen = octeon3_eth_node + priv->node;
>> +		atomic_set(&oen->workers[0].kick, 1);
>> +		wake_up(&oen->workers[0].queue);
>> +	}
>> +
>> +	/* Stop the thread when no work is pending */
>> +	if (rx_count < budget) {
>> +		napi_complete(napi);
>> +		octeon3_sso_irq_set(cxt->parent->node, cxt->rx_grp, true);
>> +	}
>> +
>> +	if (likely(USE_ASYNC_IOBDMA)) {
>> +		/* Restore the scratch area */
>> +		scratch_write64(SCR_SCRATCH, old_scratch);
>> +	}
>> +
>> +	return rx_count;
>> +}
>> +
>> +#undef BROKEN_SIMULATOR_CSUM
>> +
>> +static void ethtool_get_drvinfo(struct net_device *netdev,
>> +				struct ethtool_drvinfo *info)
>> +{
>> +	strcpy(info->driver, "octeon3-ethernet");
>> +	strcpy(info->version, "1.0");
>> +	strcpy(info->bus_info, "Builtin");
> 
> I believe the correct way to specify that type of bus is to use "platform".

OK.

> 
> [snip]
> 
>> +static int octeon3_eth_common_ndo_stop(struct net_device *netdev)
>> +{
>> +	struct octeon3_ethernet *priv = netdev_priv(netdev);
>> +	void **w;
>> +	struct sk_buff *skb;
>> +	struct octeon3_rx *rx;
>> +	int i;
>> +
>> +	/* Allow enough time for ingress in transit packets to be drained */
>> +	msleep(20);
> 
> Can you find a better way to do that? You can put a hard disable on the
> hardware, and then wait until a particular condition to indicate full
> drainage?

We are doing the "hard disable", we must wait a non-zero (but bounded) 
abount of time before we can reliably do the polling for the backlog to 
reach zero.  Perhaps the comment is all that needs improving.

> 
> [snip]
> 
>> +static int octeon3_eth_ndo_start_xmit(struct sk_buff *skb,
>> +				      struct net_device *netdev)
>> +{
>> +	struct sk_buff *skb_tmp;
>> +	struct octeon3_ethernet *priv = netdev_priv(netdev);
>> +	u64 scr_off = LMTDMA_SCR_OFFSET;
>> +	u64 pko_send_desc;
>> +	u64 lmtdma_data;
>> +	u64 aq_cnt = 0;
>> +	struct octeon3_ethernet_node *oen;
>> +	long backlog;
>> +	int frag_count;
>> +	u64 head_len;
>> +	int i;
>> +	u64 *dma_addr;
> 
> dma_addr_t?

Nope.

Perhaps we should rename the variable to:

    u64 *lmtdma_addr;

It is a very special virtual address that must have the command word 
written into it.

> 
>> +	void **work;
>> +	unsigned int mss;
>> +	int grp;
>> +
>> +	frag_count = 0;
>> +	if (skb_has_frag_list(skb))
>> +		skb_walk_frags(skb, skb_tmp)
>> +			frag_count++;
>> +
>> +	/* Stop the queue if pko or sso are not keeping up */
>> +	oen = octeon3_eth_node + priv->node;
>> +	aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(oen->node, oen->tx_complete_grp));
>> +	aq_cnt &= GENMASK_ULL(32, 0);
>> +	backlog = atomic64_inc_return(&priv->tx_backlog);
>> +	if (unlikely(backlog > MAX_TX_QUEUE_DEPTH || aq_cnt > 100000))
>> +		netif_stop_queue(netdev);
>> +
>> +	/* We have space for 11 segment pointers, If there will be
>> +	 * more than that, we must linearize.  The count is: 1 (base
>> +	 * SKB) + frag_count + nr_frags.
>> +	 */
>> +	if (unlikely(skb_shinfo(skb)->nr_frags + frag_count > 10)) {
>> +		if (unlikely(__skb_linearize(skb)))
>> +			goto skip_xmit;
>> +		frag_count = 0;
>> +	}
> 
> What's so special about 10? The maximum the network stack could pass is
> SKB_MAX_FRAGS, what would happen in that case?


The comment attempts to answer this question.

The command block to the PKO consists of between 1 and 16 64-bit command 
words.  5 of these command words are needed for non-segment-pointer use, 
leaving 11 available for segment pointers.


> 
>> +
>> +	work = (void **)skb->cb;
>> +	work[0] = netdev;
>> +	work[1] = NULL;
>> +
>> +	/* Adjust the port statistics. */
>> +	atomic64_inc(&priv->tx_packets);
>> +	atomic64_add(skb->len, &priv->tx_octets);
> 
> Do this in the TX completion worker, there is no guarantee the packet
> will be transmitted that early in this function.

When we start doing XDP based forwarding, there is no TX completion 
event to software, so the simplest thing to do is account for things here.

> 
>> +
>> +	/* Make sure packet data writes are committed before
>> +	 * submitting the command below
>> +	 */
>> +	wmb();
> 
> That seems just wrong here, if your goal is to make sure that e.g:
> skb_linearize() did finish its pending writes to DRAM, you need to use
> DMA-API towards that goal. If the device is cache coherent, DMA-API will
> know that and do nothing.

It is a problem of write ordering, not cache coherency (OCTEON is fully 
coherent).  That said, the DMA-API does take care of ordering also.

This is really an optimization that skips a bunch of function calls in 
the hot path.

> 
>> +
>> +	/* Build the pko command */
>> +	pko_send_desc = build_pko_send_hdr_desc(skb);
>> +	preempt_disable();
> 
> Why do you disable preemption here?

So we don't have the overhead of having to save and restore the CPU 
local memory on each interrupt and task switch.


> 
>> +	scratch_write64(scr_off, pko_send_desc);
>> +	scr_off += sizeof(pko_send_desc);
>> +
>> +	/* Request packet to be ptp timestamped */
>> +	if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
>> +	    unlikely(priv->tx_timestamp_hw)) {
>> +		pko_send_desc = build_pko_send_ext_desc(skb);
>> +		scratch_write64(scr_off, pko_send_desc);
>> +		scr_off += sizeof(pko_send_desc);
>> +	}
>> +
>> +	/* Add the tso descriptor if needed */
>> +	mss = skb_shinfo(skb)->gso_size;
>> +	if (unlikely(mss)) {
>> +		pko_send_desc = build_pko_send_tso(skb, netdev->mtu);
>> +		scratch_write64(scr_off, pko_send_desc);
>> +		scr_off += sizeof(pko_send_desc);
>> +	}
>> +
>> +	/* Add a gather descriptor for each segment. See PKO_SEND_GATHER_S for
>> +	 * the send gather descriptor format.
>> +	 */
>> +	pko_send_desc = 0;
>> +	pko_send_desc |= (u64)PKO_SENDSUBDC_GATHER << 45;
>> +	head_len = skb_headlen(skb);
>> +	if (head_len > 0) {
>> +		pko_send_desc |= head_len << 48;
>> +		pko_send_desc |= virt_to_phys(skb->data);
>> +		scratch_write64(scr_off, pko_send_desc);
>> +		scr_off += sizeof(pko_send_desc);
>> +	}
>> +	for (i = 1; i <= skb_shinfo(skb)->nr_frags; i++) {
>> +		struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i - 1;
>> +
>> +		pko_send_desc &= ~(GENMASK_ULL(63, 48) | GENMASK_ULL(41, 0));
>> +		pko_send_desc |= (u64)fs->size << 48;
>> +		pko_send_desc |= virt_to_phys((u8 *)page_address(fs->page.p) + fs->page_offset);
>> +		scratch_write64(scr_off, pko_send_desc);
>> +		scr_off += sizeof(pko_send_desc);
>> +	}
>> +	skb_walk_frags(skb, skb_tmp) {
>> +		pko_send_desc &= ~(GENMASK_ULL(63, 48) | GENMASK_ULL(41, 0));
>> +		pko_send_desc |= (u64)skb_tmp->len << 48;
>> +		pko_send_desc |= virt_to_phys(skb_tmp->data);
>> +		scratch_write64(scr_off, pko_send_desc);
>> +		scr_off += sizeof(pko_send_desc);
>> +	}
>> +
>> +	/* Subtract 1 from the tx_backlog. */
>> +	pko_send_desc = build_pko_send_mem_sub(virt_to_phys(&priv->tx_backlog));
>> +	scratch_write64(scr_off, pko_send_desc);
>> +	scr_off += sizeof(pko_send_desc);
>> +
>> +	/* Write the ptp timestamp in the skb itself */
>> +	if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
>> +	    unlikely(priv->tx_timestamp_hw)) {
>> +		pko_send_desc = build_pko_send_mem_ts(virt_to_phys(&work[1]));
>> +		scratch_write64(scr_off, pko_send_desc);
>> +		scr_off += sizeof(pko_send_desc);
>> +	}
>> +
>> +	/* Send work when finished with the packet. */
>> +	grp = octeon3_eth_lgrp_to_ggrp(priv->node, priv->tx_complete_grp);
>> +	pko_send_desc = build_pko_send_work(grp, virt_to_phys(work));
>> +	scratch_write64(scr_off, pko_send_desc);
>> +	scr_off += sizeof(pko_send_desc);
>> +
>> +	/* See PKO_SEND_DMA_S in the HRM for the lmtdam data format */
>> +	lmtdma_data = 0;
>> +	lmtdma_data |= (u64)(LMTDMA_SCR_OFFSET >> 3) << 56;
>> +	if (wait_pko_response)
>> +		lmtdma_data |= 1ull << 48;
>> +	lmtdma_data |= 0x51ull << 40;
>> +	lmtdma_data |= (u64)priv->node << 36;
>> +	lmtdma_data |= priv->pko_queue << 16;
>> +
>> +	dma_addr = (u64 *)(LMTDMA_ORDERED_IO_ADDR | ((scr_off & 0x78) - 8));
>> +	*dma_addr = lmtdma_data;
>> +
>> +	preempt_enable();
>> +
>> +	if (wait_pko_response) {
>> +		u64	query_rtn;
>> +
>> +		CVMX_SYNCIOBDMA;
>> +
>> +		/* See PKO_QUERY_RTN_S in the HRM for the return format */
>> +		query_rtn = scratch_read64(LMTDMA_SCR_OFFSET);
>> +		query_rtn >>= 60;
>> +		if (unlikely(query_rtn != PKO_DQSTATUS_PASS)) {
>> +			netdev_err(netdev, "PKO enqueue failed %llx\n",
>> +				   (unsigned long long)query_rtn);
>> +			dev_kfree_skb_any(skb);
>> +		}
>> +	}
> 
> So I am not sure I fully understand how sending packets works, although
> it seems to be like you are building a work element (pko_send_desc)
> which references either a full-size Ethernet frame, or that frame and
> its fragments (multiple pko_send_desc). In that case, I don't see why
> you can't juse dma_map_single()/dma_unmap_single() against skb->data and
> its potential fragments instead of using virt_to_phys() like you
> currently do, which is absolutely not portable.
> 
> dma_map_single() on the kernel linear address space should be equivalent
> to virt_to_phys() anyway, and you would get the nice things about
> DMA-API like its portability.
> 
> I could imagine that, for coherency purposes, there may be a requirement
> to keep tskb->data and frieds to be within XKSEG0/1, if that's the case,
> DMA-API should know that too.
> 
> I might be completely off, but using virt_to_phys() sure does sound non
> portable here.


The PKO command block with all of its gather dma pointers is written 
into a special CPU local memory region.  The whole thing it atomically 
transmitted via a store to a special CPU local address window.

We need to keep everything on a single CPU, thus the preempt disable/enable.

The whole mechanism is highly OCTEON specific, and as such it works to 
use the wmb() and virt_to_phys() macros instead of calling all the 
dma_map_*() funcitons.  Would it be more clear to use dma_map_*()? 
Perhaps.  Would it be slower?  Yes.


> 
>> +
>> +	return NETDEV_TX_OK;
>> +skip_xmit:
>> +	atomic64_inc(&priv->tx_dropped);
>> +	dev_kfree_skb_any(skb);
>> +	return NETDEV_TX_OK;
>> +}
>> +
>> +static void octeon3_eth_ndo_get_stats64(struct net_device *netdev,
>> +					struct rtnl_link_stats64 *s)
>> +{
>> +	struct octeon3_ethernet *priv = netdev_priv(netdev);
>> +	u64 packets, octets, dropped;
>> +	u64 delta_packets, delta_octets, delta_dropped;
>> +
>> +	spin_lock(&priv->stat_lock);
> 
> Consider using u64_stats_sync to get rid of this lock...

My timer went missing.  This also has to be called periodically from a 
timer to catch wraparound in the 48 bit counters.

Locking is still necessary to synchronize between the timer and calls to 
the get_stat function.

I will sort this out.


> 
>> +
>> +	octeon3_pki_get_stats(priv->node, priv->pknd, &packets, &octets, &dropped);
>> +
>> +	delta_packets = (packets - priv->last_packets) & ((1ull << 48) - 1);
>> +	delta_octets = (octets - priv->last_octets) & ((1ull << 48) - 1);
>> +	delta_dropped = (dropped - priv->last_dropped) & ((1ull << 48) - 1);
>> +
>> +	priv->last_packets = packets;
>> +	priv->last_octets = octets;
>> +	priv->last_dropped = dropped;
>> +
>> +	spin_unlock(&priv->stat_lock);
>> +
>> +	atomic64_add(delta_packets, &priv->rx_packets);
>> +	atomic64_add(delta_octets, &priv->rx_octets);
>> +	atomic64_add(delta_dropped, &priv->rx_dropped);
> 
> and summing up these things as well.
> 
>> +
>> +	s->rx_packets = atomic64_read(&priv->rx_packets);
>> +	s->rx_bytes = atomic64_read(&priv->rx_octets);
>> +	s->rx_dropped = atomic64_read(&priv->rx_dropped);
>> +	s->rx_errors = atomic64_read(&priv->rx_errors);
>> +	s->rx_length_errors = atomic64_read(&priv->rx_length_errors);
>> +	s->rx_crc_errors = atomic64_read(&priv->rx_crc_errors);
>> +
>> +	s->tx_packets = atomic64_read(&priv->tx_packets);
>> +	s->tx_bytes = atomic64_read(&priv->tx_octets);
>> +	s->tx_dropped = atomic64_read(&priv->tx_dropped);
>> +}
> 
> [snip]
> 
>> +enum port_mode {
>> +	PORT_MODE_DISABLED,
>> +	PORT_MODE_SGMII,
>> +	PORT_MODE_RGMII,
>> +	PORT_MODE_XAUI,
>> +	PORT_MODE_RXAUI,
>> +	PORT_MODE_XLAUI,
>> +	PORT_MODE_XFI,
>> +	PORT_MODE_10G_KR,
>> +	PORT_MODE_40G_KR4
>> +};
> 
> Can you use phy_interface_t values for this?

They have many of the same names, but this enum contains only things we 
support, and maps to values in register fields.  using phy_interface_t 
might falsly imply we support everything in there.


> 
>> +
>> +enum lane_mode {
>> +	R_25G_REFCLK100,
>> +	R_5G_REFCLK100,
>> +	R_8G_REFCLK100,
>> +	R_125G_REFCLK15625_KX,
>> +	R_3125G_REFCLK15625_XAUI,
>> +	R_103125G_REFCLK15625_KR,
>> +	R_125G_REFCLK15625_SGMII,
>> +	R_5G_REFCLK15625_QSGMII,
>> +	R_625G_REFCLK15625_RXAUI,
>> +	R_25G_REFCLK125,
>> +	R_5G_REFCLK125,
>> +	R_8G_REFCLK125
>> +};
>> +
>> +struct port_status {
>> +	int	link;
>> +	int	duplex;
>> +	int	speed;
>> +};
> 
> Likewise, using phy_device would give you this information.

I will look at doing that.

>
Andrew Lunn Nov. 3, 2017, 3:48 p.m. UTC | #10 
> >>+static char *mix_port;
> >>+module_param(mix_port, charp, 0444);
> >>+MODULE_PARM_DESC(mix_port, "Specifies which ports connect to MIX interfaces.");
> >
> >Can you derive this from Device Tree /platform data configuration?
> >
> >>+
> >>+static char *pki_port;
> >>+module_param(pki_port, charp, 0444);
> >>+MODULE_PARM_DESC(pki_port, "Specifies which ports connect to the PKI.");
> >
> >Likewise
> 
> The SoC is flexible in how it is configured.  Technically the device tree
> should only be used to specify information about the physical configuration
> of the system that cannot be probed for, and this is about policy rather
> that physical wiring.  That said, we do take the default configuration from
> the device tree, but give the option here to override via the module command
> line.

Module parameters are pretty much frowned upon. 

You should really try to remove them all, if possible.

> >>+/* Registers are accessed via xkphys */
> >>+#define SSO_BASE			0x1670000000000ull
> >>+#define SSO_ADDR(node)			(SET_XKPHYS + NODE_OFFSET(node) +      \
> >>+					 SSO_BASE)
> >>+#define GRP_OFFSET(grp)			((grp) << 16)
> >>+#define GRP_ADDR(n, g)			(SSO_ADDR(n) + GRP_OFFSET(g))
> >>+#define SSO_GRP_AQ_CNT(n, g)		(GRP_ADDR(n, g)		   + 0x20000700)
> >>+
> >>+#define MIO_PTP_BASE			0x1070000000000ull
> >>+#define MIO_PTP_ADDR(node)		(SET_XKPHYS + NODE_OFFSET(node) +      \
> >>+					 MIO_PTP_BASE)
> >>+#define MIO_PTP_CLOCK_CFG(node)		(MIO_PTP_ADDR(node)		+ 0xf00)
> >>+#define MIO_PTP_CLOCK_HI(node)		(MIO_PTP_ADDR(node)		+ 0xf10)
> >>+#define MIO_PTP_CLOCK_COMP(node)	(MIO_PTP_ADDR(node)		+ 0xf18)
> >
> >I am sure this will work great on anything but MIPS64 ;)
> 
> Sarcasm duly noted.
> 
> That said, by definition it is exactly an OCTEON-III/MIPS64, and can never
> be anything else.  It is known a priori that the hardware and this driver
> will never be used anywhere else.

Please make sure your Kconfig really enforces this. Generally, we
suggest allowing the driver to be compiled when COMPILE_TEST is set.
That gives you better compiler test coverage. But it seems like this
driver won't compile under such conditions.

> >>+static int num_packet_buffers = 768;
> >>+module_param(num_packet_buffers, int, 0444);
> >>+MODULE_PARM_DESC(num_packet_buffers,
> >>+		 "Number of packet buffers to allocate per port.");
> >
> >Consider implementing ethtool -g/G for this.
> 
> That may be work for a follow-on patch.

Then please remove the module parameter now.

> >>+static int rx_queues = 1;
> >>+module_param(rx_queues, int, 0444);
> >>+MODULE_PARM_DESC(rx_queues, "Number of RX threads per port.");
> >
> >Same thing, can you consider using an ethtool knob for that?
> 
> Also may be work for a follow-on patch.

Ditto

> >>+/**
> >>+ * Reads a 64 bit value from the processor local scratchpad memory.
> >>+ *
> >>+ * @param offset byte offset into scratch pad to read
> >>+ *
> >>+ * @return value read
> >>+ */
> >>+static inline u64 scratch_read64(u64 offset)
> >>+{
> >>+	return *(u64 *)((long)SCRATCH_BASE + offset);
> >>+}
> >
> >No barriers needed whatsoever?
> 
> Nope.

Then it would be good to add a comment about why no barrier is
needed. Otherwise people are going to ask why there is no barrier,
submit patches adding barriers, etc.

       Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig
index 63be75eb34d2..366c0b238b76 100644
--- a/drivers/net/ethernet/cavium/Kconfig
+++ b/drivers/net/ethernet/cavium/Kconfig
@@ -4,7 +4,7 @@ 
 
 config NET_VENDOR_CAVIUM
 	bool "Cavium ethernet drivers"
-	depends on PCI
+	depends on PCI || CAVIUM_OCTEON_SOC
 	default y
 	---help---
 	  Select this option if you want enable Cavium network support.
@@ -87,4 +87,30 @@  config LIQUIDIO_VF
 	  will be called liquidio_vf. MSI-X interrupt support is required
 	  for this driver to work correctly
 
+config OCTEON3_BGX_NEXUS
+	tristate
+	depends on CAVIUM_OCTEON_SOC
+
+config OCTEON3_BGX_PORT
+	tristate "Cavium Octeon III BGX port support"
+	depends on CAVIUM_OCTEON_SOC
+	select OCTEON3_BGX_NEXUS
+	select OCTEON3_COMMON_NEXUS
+	---help---
+	  This driver adds support for Cavium Octeon III BGX ports. BGX ports
+	  support sgmii, rgmii, xaui, rxaui, xlaui, xfi, 10KR and 40KR modes.
+
+	  Say Y to use the management port on Octeon III boards or to use
+	  any other ethernet port.
+
+config OCTEON3_ETHERNET
+	tristate "Cavium OCTEON III PKI/PKO Ethernet support"
+	depends on CAVIUM_OCTEON_SOC
+	select OCTEON_BGX_PORT
+	select OCTEON_FPA3
+	select FW_LOADER
+	---help---
+	  Support for 'BGX' Ethernet via PKI/PKO units.  No support
+	  for cn70xx chips (use OCTEON_ETHERNET for cn70xx).
+
 endif # NET_VENDOR_CAVIUM
diff --git a/drivers/net/ethernet/cavium/octeon/Makefile b/drivers/net/ethernet/cavium/octeon/Makefile
index efa41c1d91c5..1eacab1d8dad 100644
--- a/drivers/net/ethernet/cavium/octeon/Makefile
+++ b/drivers/net/ethernet/cavium/octeon/Makefile
@@ -3,3 +3,9 @@ 
 #
 
 obj-$(CONFIG_OCTEON_MGMT_ETHERNET)	+= octeon_mgmt.o
+obj-$(CONFIG_OCTEON3_BGX_PORT)		+= octeon3-bgx-port.o
+obj-$(CONFIG_OCTEON3_BGX_NEXUS)		+= octeon3-bgx-nexus.o
+obj-$(CONFIG_OCTEON3_ETHERNET)		+= octeon3-ethernet.o
+
+octeon3-ethernet-objs += octeon3-core.o octeon3-pki.o octeon3-sso.o \
+			 octeon3-pko.o
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c b/drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c
new file mode 100644
index 000000000000..bd6bb0090671
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c
@@ -0,0 +1,698 @@ 
+/*
+ * Copyright (c) 2017 Cavium, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/ctype.h>
+
+#include "octeon3.h"
+
+static atomic_t request_mgmt_once;
+static atomic_t load_driver_once;
+static atomic_t pki_id;
+
+static char *mix_port;
+module_param(mix_port, charp, 0444);
+MODULE_PARM_DESC(mix_port, "Specifies which ports connect to MIX interfaces.");
+
+static char *pki_port;
+module_param(pki_port, charp, 0444);
+MODULE_PARM_DESC(pki_port, "Specifies which ports connect to the PKI.");
+
+#define MAX_MIX_PER_NODE	2
+
+#define MAX_MIX			(MAX_NODES * MAX_MIX_PER_NODE)
+
+/**
+ * struct mix_port_lmac - Describes a lmac that connects to a mix
+ *			  port. The lmac must be on the same node as
+ *			  the mix.
+ * @node:	Node of the lmac.
+ * @bgx:	Bgx of the lmac.
+ * @lmac:	Lmac index.
+ */
+struct mix_port_lmac {
+	int	node;
+	int	bgx;
+	int	lmac;
+};
+
+/* mix_ports_lmacs contains all the lmacs connected to mix ports */
+static struct mix_port_lmac mix_port_lmacs[MAX_MIX];
+
+/* pki_ports keeps track of the lmacs connected to the pki */
+static bool pki_ports[MAX_NODES][MAX_BGX_PER_NODE][MAX_LMAC_PER_BGX];
+
+/* Created platform devices get added to this list */
+static struct list_head pdev_list;
+static struct mutex pdev_list_lock;
+
+/* Created platform device use this structure to add themselves to the list */
+struct pdev_list_item {
+	struct list_head	list;
+	struct platform_device	*pdev;
+};
+
+/**
+ * is_lmac_to_mix - Search the list of lmacs connected to mix'es for a match.
+ * @node: Numa node of lmac to search for.
+ * @bgx: Bgx of lmac to search for.
+ * @lmac: Lmac index to search for.
+ *
+ * Returns true if the lmac is connected to a mix.
+ * Returns false if the lmac is not connected to a mix.
+ */
+static bool is_lmac_to_mix(int node, int bgx, int lmac)
+{
+	int	i;
+
+	for (i = 0; i < MAX_MIX; i++) {
+		if (mix_port_lmacs[i].node == node &&
+		    mix_port_lmacs[i].bgx == bgx &&
+		    mix_port_lmacs[i].lmac == lmac)
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ * is_lmac_to_pki - Search the list of lmacs connected to the pki for a match.
+ * @node: Numa node of lmac to search for.
+ * @bgx: Bgx of lmac to search for.
+ * @lmac: Lmac index to search for.
+ *
+ * Returns true if the lmac is connected to the pki.
+ * Returns false if the lmac is not connected to the pki.
+ */
+static bool is_lmac_to_pki(int node, int bgx, int lmac)
+{
+	return pki_ports[node][bgx][lmac];
+}
+
+/**
+ * is_lmac_to_xcv - Check if this lmac is connected to the xcv block (rgmii).
+ * @of_node: Device node to check.
+ *
+ * Returns true if the lmac is connected to the xcv port.
+ * Returns false if the lmac is not connected to the xcv port.
+ */
+static bool is_lmac_to_xcv(struct device_node *of_node)
+{
+	return of_device_is_compatible(of_node, "cavium,octeon-7360-xcv");
+}
+
+static int bgx_probe(struct platform_device *pdev)
+{
+	struct mac_platform_data platform_data;
+	const __be32 *reg;
+	u32 port;
+	u64 addr;
+	struct device_node *child;
+	struct platform_device *new_dev;
+	struct platform_device *pki_dev;
+	int numa_node, interface;
+	int i;
+	int r = 0;
+	char id[64];
+	u64 data;
+
+	reg = of_get_property(pdev->dev.of_node, "reg", NULL);
+	addr = of_translate_address(pdev->dev.of_node, reg);
+	interface = (addr >> 24) & 0xf;
+	numa_node = (addr >> 36) & 0x7;
+
+	/* Assign 8 CAM entries per LMAC */
+	for (i = 0; i < 32; i++) {
+		data = i >> 3;
+		oct_csr_write(data, BGX_CMR_RX_ADRX_CAM(numa_node, interface, i));
+	}
+
+	for_each_available_child_of_node(pdev->dev.of_node, child) {
+		bool is_mix = false;
+		bool is_pki = false;
+		bool is_xcv = false;
+		struct pdev_list_item *pdev_item;
+
+		if (!of_device_is_compatible(child, "cavium,octeon-7890-bgx-port") &&
+		    !of_device_is_compatible(child, "cavium,octeon-7360-xcv"))
+			continue;
+		r = of_property_read_u32(child, "reg", &port);
+		if (r)
+			return -ENODEV;
+
+		is_mix = is_lmac_to_mix(numa_node, interface, port);
+		is_pki = is_lmac_to_pki(numa_node, interface, port);
+		is_xcv = is_lmac_to_xcv(child);
+
+		/* Check if this port should be configured */
+		if (!is_mix && !is_pki)
+			continue;
+
+		/* Connect to PKI/PKO */
+		data = oct_csr_read(BGX_CMR_CONFIG(numa_node, interface, port));
+		if (is_mix)
+			data |= BIT(11);
+		else
+			data &= ~BIT(11);
+		oct_csr_write(data, BGX_CMR_CONFIG(numa_node, interface, port));
+
+		/* Unreset the mix bgx interface or it will interfare with the
+		 * other ports.
+		 */
+		if (is_mix) {
+			data = oct_csr_read(BGX_CMR_GLOBAL_CONFIG(numa_node, interface));
+			if (!port)
+				data &= ~BIT(3);
+			else if (port == 1)
+				data &= ~BIT(4);
+			oct_csr_write(data, BGX_CMR_GLOBAL_CONFIG(numa_node, interface));
+		}
+
+		snprintf(id, sizeof(id), "%llx.%u.ethernet-mac",
+			 (unsigned long long)addr, port);
+		new_dev = of_platform_device_create(child, id, &pdev->dev);
+		if (!new_dev) {
+			dev_err(&pdev->dev, "Error creating %s\n", id);
+			continue;
+		}
+		platform_data.mac_type = BGX_MAC;
+		platform_data.numa_node = numa_node;
+		platform_data.interface = interface;
+		platform_data.port = port;
+		if (is_xcv)
+			platform_data.src_type = XCV;
+		else
+			platform_data.src_type = QLM;
+
+		/* Add device to the list of created devices so we can remove it
+		 * on exit.
+		 */
+		pdev_item = kmalloc(sizeof(*pdev_item), GFP_KERNEL);
+		pdev_item->pdev = new_dev;
+		mutex_lock(&pdev_list_lock);
+		list_add(&pdev_item->list, &pdev_list);
+		mutex_unlock(&pdev_list_lock);
+
+		i = atomic_inc_return(&pki_id);
+		pki_dev = platform_device_register_data(&new_dev->dev,
+							is_mix ? "octeon_mgmt" : "ethernet-mac-pki",
+							i, &platform_data, sizeof(platform_data));
+		dev_info(&pdev->dev, "Created %s %u: %p\n",
+			 is_mix ? "MIX" : "PKI", pki_dev->id, pki_dev);
+
+		/* Add device to the list of created devices so we can remove it
+		 * on exit.
+		 */
+		pdev_item = kmalloc(sizeof(*pdev_item), GFP_KERNEL);
+		pdev_item->pdev = pki_dev;
+		mutex_lock(&pdev_list_lock);
+		list_add(&pdev_item->list, &pdev_list);
+		mutex_unlock(&pdev_list_lock);
+
+#ifdef CONFIG_NUMA
+		new_dev->dev.numa_node = pdev->dev.numa_node;
+		pki_dev->dev.numa_node = pdev->dev.numa_node;
+#endif
+		/* One time request driver module */
+		if (is_mix) {
+			if (atomic_cmpxchg(&request_mgmt_once, 0, 1) == 0)
+				request_module_nowait("octeon_mgmt");
+		}
+		if (is_pki) {
+			if (atomic_cmpxchg(&load_driver_once, 0, 1) == 0)
+				request_module_nowait("octeon3-ethernet");
+		}
+	}
+
+	dev_info(&pdev->dev, "Probed\n");
+	return 0;
+}
+
+/**
+ * bgx_mix_init_from_fdt - Initialize the list of lmacs that connect to mix
+ *			   ports from information in the device tree.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+static int bgx_mix_init_from_fdt(void)
+{
+	struct device_node	*node;
+	struct device_node	*parent = NULL;
+	int			mix = 0;
+
+	for_each_compatible_node(node, NULL, "cavium,octeon-7890-mix") {
+		struct device_node	*lmac_fdt_node;
+		const __be32		*reg;
+		u64			addr;
+
+		/* Get the fdt node of the lmac connected to this mix */
+		lmac_fdt_node = of_parse_phandle(node, "cavium,mac-handle", 0);
+		if (!lmac_fdt_node)
+			goto err;
+
+		/* Get the numa node and bgx of the lmac */
+		parent = of_get_parent(lmac_fdt_node);
+		if (!parent)
+			goto err;
+		reg = of_get_property(parent, "reg", NULL);
+		if (!reg)
+			goto err;
+		addr = of_translate_address(parent, reg);
+		of_node_put(parent);
+		parent = NULL;
+
+		mix_port_lmacs[mix].node = (addr >> 36) & 0x7;
+		mix_port_lmacs[mix].bgx = (addr >> 24) & 0xf;
+
+		/* Get the lmac index */
+		reg = of_get_property(lmac_fdt_node, "reg", NULL);
+		if (!reg)
+			goto err;
+
+		mix_port_lmacs[mix].lmac = *reg;
+
+		mix++;
+		if (mix >= MAX_MIX)
+			break;
+	}
+
+	return 0;
+ err:
+	pr_warn("Invalid device tree mix port information\n");
+	for (mix = 0; mix < MAX_MIX; mix++) {
+		mix_port_lmacs[mix].node = -1;
+		mix_port_lmacs[mix].bgx = -1;
+		mix_port_lmacs[mix].lmac = -1;
+	}
+	if (parent)
+		of_node_put(parent);
+
+	return -EINVAL;
+}
+
+/**
+ * bgx_mix_init_from_param - Initialize the list of lmacs that connect to mix
+ *			     ports from information in the "mix_port" parameter.
+ *			     The mix_port parameter format is as follows:
+ *			     mix_port=nbl
+ *			     where:
+ *				n = node
+ *				b = bgx
+ *				l = lmac
+ *			     There can be up to 4 lmacs defined separated by
+ *			     commas. For example to select node0, bgx0, lmac0
+ *			     and node0, bgx4, lamc0, the mix_port parameter
+ *			     would be: mix_port=000,040
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+static int bgx_mix_init_from_param(void)
+{
+	char	*p = mix_port;
+	int	mix = 0;
+	int	i;
+
+	while (*p) {
+		int	node = -1;
+		int	bgx = -1;
+		int	lmac = -1;
+
+		if (strlen(p) < 3)
+			goto err;
+
+		/* Get the numa node */
+		if (!isdigit(*p))
+			goto err;
+		node = *p - '0';
+		if (node >= MAX_NODES)
+			goto err;
+
+		/* Get the bgx */
+		p++;
+		if (!isdigit(*p))
+			goto err;
+		bgx = *p - '0';
+		if (bgx >= MAX_BGX_PER_NODE)
+			goto err;
+
+		/* Get the lmac index */
+		p++;
+		if (!isdigit(*p))
+			goto err;
+		lmac = *p - '0';
+		if (lmac >= 2)
+			goto err;
+
+		/* Only one lmac0 and one lmac1 per node is supported */
+		for (i = 0; i < MAX_MIX; i++) {
+			if (mix_port_lmacs[i].node == node &&
+			    mix_port_lmacs[i].lmac == lmac)
+				goto err;
+		}
+
+		mix_port_lmacs[mix].node = node;
+		mix_port_lmacs[mix].bgx = bgx;
+		mix_port_lmacs[mix].lmac = lmac;
+
+		p++;
+		if (*p == ',')
+			p++;
+
+		mix++;
+		if (mix >= MAX_MIX)
+			break;
+	}
+
+	return 0;
+ err:
+	pr_warn("Invalid parameter mix_port=%s\n", mix_port);
+	for (mix = 0; mix < MAX_MIX; mix++) {
+		mix_port_lmacs[mix].node = -1;
+		mix_port_lmacs[mix].bgx = -1;
+		mix_port_lmacs[mix].lmac = -1;
+	}
+	return -EINVAL;
+}
+
+/**
+ * bgx_mix_port_lmacs_init - Initialize the mix_port_lmacs variable with the
+ *			     lmacs that connect to mic ports.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+static int bgx_mix_port_lmacs_init(void)
+{
+	int	mix;
+
+	/* Start with no mix ports configured */
+	for (mix = 0; mix < MAX_MIX; mix++) {
+		mix_port_lmacs[mix].node = -1;
+		mix_port_lmacs[mix].bgx = -1;
+		mix_port_lmacs[mix].lmac = -1;
+	}
+
+	/* Check if no mix port should be configured */
+	if (mix_port && !strcmp(mix_port, "none"))
+		return 0;
+
+	/* Configure the mix ports using information from the device tree if no
+	 * parameter was passed. Otherwise, use the information in the module
+	 * parameter.
+	 */
+	if (!mix_port)
+		bgx_mix_init_from_fdt();
+	else
+		bgx_mix_init_from_param();
+
+	return 0;
+}
+
+/**
+ * bgx_parse_pki_elem - Parse a single element (node, bgx, or lmac) out a pki
+ *			lmac string and set its bitmap accordingly.
+ * @str: Pki lmac string to parse.
+ * @bitmap: Updated with the bits selected by str.
+ * @size: Maximum size of the bitmap.
+ *
+ * Returns number of characters processed from str.
+ * Returns <0 for error codes.
+ */
+static int bgx_parse_pki_elem(const char *str, unsigned long *bitmap, int size)
+{
+	const char	*p = str;
+	int		len = -1;
+	int		bit;
+
+	if (*p == 0) {
+		/* If identifier is missing, the whole subset is allowed */
+		bitmap_set(bitmap, 0, size);
+		len = 0;
+	} else if (*p == '*') {
+		/* If identifier is an asterisk, the whole subset is allowed */
+		bitmap_set(bitmap, 0, size);
+		len = 1;
+	} else if (isdigit(*p)) {
+		/* If identifier is a digit, only the bit corresponding to the
+		 * digit is set.
+		 */
+		bit = *p - '0';
+		if (bit < size) {
+			bitmap_set(bitmap, bit, 1);
+			len = 1;
+		}
+	} else if (*p == '[') {
+		/* If identifier is a bracket, all the bits corresponding to
+		 * the digits inside the bracket are set.
+		 */
+		p++;
+		len = 1;
+		do {
+			if (isdigit(*p)) {
+				bit = *p - '0';
+				if (bit < size)
+					bitmap_set(bitmap, bit, 1);
+				else
+					return -1;
+			} else {
+				return -1;
+			}
+			p++;
+			len++;
+		} while (*p != ']');
+		len++;
+	} else {
+		len = -1;
+	}
+
+	return len;
+}
+
+/**
+ * bgx_pki_bitmap_set - Set the bitmap bits for all elements (node, bgx, and
+ *			lmac) selected by a pki lmac string.
+ * @str: Pki lmac string to process.
+ * @node: Updated with the nodes specified in the pki lmac string.
+ * @bgx: Updated with the bgx's specified in the pki lmac string.
+ * @lmac: Updated with the lmacs specified in the pki lmac string.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+static unsigned long bgx_pki_bitmap_set(const char *str, unsigned long *node,
+					unsigned long *bgx, unsigned long *lmac)
+{
+	const char	*p = str;
+	int		len;
+
+	/* Parse the node */
+	len = bgx_parse_pki_elem(p, node, MAX_NODES);
+	if (len < 0)
+		goto err;
+
+	/* Parse the bgx */
+	p += len;
+	len = bgx_parse_pki_elem(p, bgx, MAX_BGX_PER_NODE);
+	if (len < 0)
+		goto err;
+
+	/* Parse the lmac */
+	p += len;
+	len = bgx_parse_pki_elem(p, lmac, MAX_LMAC_PER_BGX);
+	if (len < 0)
+		goto err;
+
+	return 0;
+ err:
+	bitmap_zero(node, MAX_NODES);
+	bitmap_zero(bgx, MAX_BGX_PER_NODE);
+	bitmap_zero(lmac, MAX_LMAC_PER_BGX);
+	return len;
+}
+
+/**
+ * bgx_pki_init_from_param - Initialize the list of lmacs that connect to the
+ *			     pki from information in the "pki_port" parameter.
+ *
+ *			     The pki_port parameter format is as follows:
+ *			     pki_port=nbl
+ *			     where:
+ *				n = node
+ *				b = bgx
+ *				l = lmac
+ *
+ *			     Commas must be used to separate multiple lmacs:
+ *			     pki_port=000,100,110
+ *
+ *			     Asterisks (*) specify all possible characters in
+ *			     the subset:
+ *			     pki_port=00* (all lmacs of node0 bgx0).
+ *
+ *			     Missing lmacs identifiers default to all
+ *			     possible characters in the subset:
+ *			     pki_port=00 (all lmacs on node0 bgx0)
+ *
+ *			     Brackets ('[' and ']') specify the valid
+ *			     characters in the subset:
+ *			     pki_port=00[01] (lmac0 and lmac1 of node0 bgx0).
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+static int bgx_pki_init_from_param(void)
+{
+	char	*cur;
+	char	*next;
+	DECLARE_BITMAP(node_bitmap, MAX_NODES);
+	DECLARE_BITMAP(bgx_bitmap, MAX_BGX_PER_NODE);
+	DECLARE_BITMAP(lmac_bitmap, MAX_LMAC_PER_BGX);
+
+	/* Parse each comma separated lmac specifier */
+	cur = pki_port;
+	while (cur) {
+		unsigned long	node;
+		unsigned long	bgx;
+		unsigned long	lmac;
+
+		bitmap_zero(node_bitmap, BITS_PER_LONG);
+		bitmap_zero(bgx_bitmap, BITS_PER_LONG);
+		bitmap_zero(lmac_bitmap, BITS_PER_LONG);
+
+		next = strchr(cur, ',');
+		if (next)
+			*next++ = '\0';
+
+		/* Convert the specifier into a bitmap */
+		bgx_pki_bitmap_set(cur, node_bitmap, bgx_bitmap, lmac_bitmap);
+
+		/* Mark the lmacs to be connected to the pki */
+		for_each_set_bit(node, node_bitmap, MAX_NODES) {
+			for_each_set_bit(bgx, bgx_bitmap, MAX_BGX_PER_NODE) {
+				for_each_set_bit(lmac, lmac_bitmap,
+						 MAX_LMAC_PER_BGX)
+					pki_ports[node][bgx][lmac] = true;
+			}
+		}
+
+		cur = next;
+	}
+
+	return 0;
+}
+
+/**
+ * bgx_pki_ports_init - Initialize the pki_ports variable with the lmacs that
+ *			connect to the pki.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+static int bgx_pki_ports_init(void)
+{
+	int	i, j, k;
+	bool	def_val;
+
+	/* Whether all ports default to connect to the pki or not depend on the
+	 * passed module parameter (if any).
+	 */
+	if (pki_port)
+		def_val = false;
+	else
+		def_val = true;
+
+	for (i = 0; i < MAX_NODES; i++) {
+		for (j = 0; j < MAX_BGX_PER_NODE; j++) {
+			for (k = 0; k < MAX_LMAC_PER_BGX; k++)
+				pki_ports[i][j][k] = def_val;
+		}
+	}
+
+	/* Check if ports have to be individually configured */
+	if (pki_port && strcmp(pki_port, "none"))
+		bgx_pki_init_from_param();
+
+	return 0;
+}
+
+static int bgx_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static void bgx_shutdown(struct platform_device *pdev)
+{
+}
+
+static const struct of_device_id bgx_match[] = {
+	{
+		.compatible = "cavium,octeon-7890-bgx",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bgx_match);
+
+static struct platform_driver bgx_driver = {
+	.probe		= bgx_probe,
+	.remove		= bgx_remove,
+	.shutdown       = bgx_shutdown,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= KBUILD_MODNAME,
+		.of_match_table = bgx_match,
+	},
+};
+
+/* Allow bgx_port driver to force this driver to load */
+void bgx_nexus_load(void)
+{
+}
+EXPORT_SYMBOL(bgx_nexus_load);
+
+static int __init bgx_driver_init(void)
+{
+	int r;
+
+	INIT_LIST_HEAD(&pdev_list);
+	mutex_init(&pdev_list_lock);
+
+	bgx_mix_port_lmacs_init();
+	bgx_pki_ports_init();
+
+	r = platform_driver_register(&bgx_driver);
+
+	return r;
+}
+
+static void __exit bgx_driver_exit(void)
+{
+	struct pdev_list_item *pdev_item;
+
+	mutex_lock(&pdev_list_lock);
+	while (!list_empty(&pdev_list)) {
+		pdev_item = list_first_entry(&pdev_list, struct pdev_list_item, list);
+		list_del(&pdev_item->list);
+		platform_device_unregister(pdev_item->pdev);
+		kfree(pdev_item);
+	}
+	mutex_unlock(&pdev_list_lock);
+
+	platform_driver_unregister(&bgx_driver);
+}
+
+module_init(bgx_driver_init);
+module_exit(bgx_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium, Inc. BGX MAC Nexus driver.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c b/drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c
new file mode 100644
index 000000000000..fb801b7f87fe
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c
@@ -0,0 +1,2023 @@ 
+/*
+ * Copyright (c) 2017 Cavium, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+struct bgx_port_priv {
+	int node;
+	int bgx;
+	int index; /* Port index on BGX block*/
+	enum port_mode mode;
+	int pknd;
+	int qlm;
+	const u8 *mac_addr;
+	struct phy_device *phydev;
+	struct device_node *phy_np;
+	bool mode_1000basex;
+	bool bgx_as_phy;
+	struct net_device *netdev;
+	struct mutex lock;	/* Serializes delayed work */
+	struct port_status (*get_link)(struct bgx_port_priv *priv);
+	int (*set_link)(struct bgx_port_priv *priv, struct port_status status);
+	struct port_status last_status;
+	struct delayed_work dwork;
+	bool work_queued;
+};
+
+/* lmac_pknd keeps track of the port kinds assigned to the lmacs */
+static int lmac_pknd[MAX_NODES][MAX_BGX_PER_NODE][MAX_LMAC_PER_BGX];
+
+static struct workqueue_struct *check_state_wq;
+static DEFINE_MUTEX(check_state_wq_mutex);
+
+int bgx_port_get_qlm(int node, int bgx, int index)
+{
+	u64	data;
+	int	qlm = -1;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX)) {
+		if (bgx < 2) {
+			data = oct_csr_read(BGX_CMR_GLOBAL_CONFIG(node, bgx));
+			if (data & 1)
+				qlm = bgx + 2;
+			else
+				qlm = bgx;
+		} else {
+			qlm = bgx + 2;
+		}
+	} else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) {
+		if (bgx < 2) {
+			qlm = bgx + 2;
+		} else {
+			/* Ports on bgx2 can be connected to qlm5 or qlm6 */
+			if (index < 2)
+				qlm = 5;
+			else
+				qlm = 6;
+		}
+	} else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+		/* Ports on bgx0 can be connected to qlm4 or qlm5 */
+		if (index < 2)
+			qlm = 4;
+		else
+			qlm = 5;
+	}
+
+	return qlm;
+}
+EXPORT_SYMBOL(bgx_port_get_qlm);
+
+/* Returns the mode of the bgx port */
+enum port_mode bgx_port_get_mode(int node, int bgx, int index)
+{
+	enum port_mode	mode;
+	u64		data;
+
+	data = oct_csr_read(BGX_CMR_CONFIG(node, bgx, index));
+
+	switch ((data >> 8) & 7) {
+	case 0:
+		mode = PORT_MODE_SGMII;
+		break;
+	case 1:
+		mode = PORT_MODE_XAUI;
+		break;
+	case 2:
+		mode = PORT_MODE_RXAUI;
+		break;
+	case 3:
+		data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(node, bgx, index));
+		/* The use of training differentiates 10G_KR from xfi */
+		if (data & BIT(1))
+			mode = PORT_MODE_10G_KR;
+		else
+			mode = PORT_MODE_XFI;
+		break;
+	case 4:
+		data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(node, bgx, index));
+		/* The use of training differentiates 40G_KR4 from xlaui */
+		if (data & BIT(1))
+			mode = PORT_MODE_40G_KR4;
+		else
+			mode = PORT_MODE_XLAUI;
+		break;
+	case 5:
+		mode = PORT_MODE_RGMII;
+		break;
+	default:
+		mode = PORT_MODE_DISABLED;
+		break;
+	}
+
+	return mode;
+}
+EXPORT_SYMBOL(bgx_port_get_mode);
+
+int bgx_port_allocate_pknd(int node)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+	int				pknd;
+
+	strncpy((char *)&tag.lo, "cvm_pknd", 8);
+	snprintf(buf, 16, "_%d......", node);
+	memcpy(&tag.hi, buf, 8);
+
+	res_mgr_create_resource(tag, 64);
+	pknd = res_mgr_alloc(tag, -1, false);
+	if (pknd < 0) {
+		pr_err("bgx-port: Failed to allocate pknd\n");
+		return -ENODEV;
+	}
+
+	return pknd;
+}
+EXPORT_SYMBOL(bgx_port_allocate_pknd);
+
+int bgx_port_get_pknd(int node, int bgx, int index)
+{
+	return lmac_pknd[node][bgx][index];
+}
+EXPORT_SYMBOL(bgx_port_get_pknd);
+
+/* GSER-20075 */
+static void bgx_port_gser_20075(struct bgx_port_priv	*priv,
+				int			qlm,
+				int			lane)
+{
+	u64	data;
+	u64	addr;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+	    (lane == -1 || lane == 3)) {
+		/* Enable software control */
+		addr = GSER_BR_RX_CTL(priv->node, qlm, 3);
+		data = oct_csr_read(addr);
+		data |= BIT(2);
+		oct_csr_write(data, addr);
+
+		/* Clear the completion flag */
+		addr = GSER_BR_RX_EER(priv->node, qlm, 3);
+		data = oct_csr_read(addr);
+		data &= ~BIT(14);
+		oct_csr_write(data, addr);
+
+		/* Initiate a new request on lane 2 */
+		if (lane == 3) {
+			addr = GSER_BR_RX_EER(priv->node, qlm, 2);
+			data = oct_csr_read(addr);
+			data |= BIT(15);
+			oct_csr_write(data, addr);
+		}
+	}
+}
+
+static void bgx_common_init_pknd(struct bgx_port_priv *priv)
+{
+	u64	data;
+	int	num_ports;
+
+	/* Setup pkind */
+	priv->pknd = bgx_port_allocate_pknd(priv->node);
+	lmac_pknd[priv->node][priv->bgx][priv->index] = priv->pknd;
+	data = oct_csr_read(BGX_CMR_RX_ID_MAP(priv->node, priv->bgx, priv->index));
+	data &= ~GENMASK_ULL(7, 0);
+	data |= priv->pknd;
+	if (OCTEON_IS_MODEL(OCTEON_CN73XX)) {
+		/* Change the default reassembly id (max allowed is 14) */
+		data &= ~GENMASK_ULL(14, 8);
+		data |= ((4 * priv->bgx) + 2 + priv->index) << 8;
+	}
+	oct_csr_write(data, BGX_CMR_RX_ID_MAP(priv->node, priv->bgx, priv->index));
+
+	/* Set backpressure channel mask AND/OR registers */
+	data = oct_csr_read(BGX_CMR_CHAN_MSK_AND(priv->node, priv->bgx));
+	data |= 0xffff << (16 * priv->index);
+	oct_csr_write(data, BGX_CMR_CHAN_MSK_AND(priv->node, priv->bgx));
+
+	data = oct_csr_read(BGX_CMR_CHAN_MSK_OR(priv->node, priv->bgx));
+	data |= 0xffff << (16 * priv->index);
+	oct_csr_write(data, BGX_CMR_CHAN_MSK_OR(priv->node, priv->bgx));
+
+	/* Rx back pressure watermark:
+	 * Set to 1/4 of the available lmacs buffer (in multiple of 16 bytes)
+	 */
+	data = oct_csr_read(BGX_CMR_TX_LMACS(priv->node, priv->bgx));
+	num_ports = data & 7;
+	data = BGX_RX_FIFO_SIZE / (num_ports * 4 * 16);
+	oct_csr_write(data, BGX_CMR_RX_BP_ON(priv->node, priv->bgx, priv->index));
+}
+
+static int bgx_xgmii_hardware_init(struct bgx_port_priv *priv)
+{
+	u64	clock_mhz;
+	u64	data;
+	u64	ctl;
+
+	/* Set TX Threshold */
+	data = 0x20;
+	oct_csr_write(data, BGX_GMP_GMI_TX_THRESH(priv->node, priv->bgx, priv->index));
+
+	data = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+	data &= ~(BIT(8) | BIT(9));
+	if (priv->mode_1000basex)
+		data |= BIT(8);
+	if (priv->bgx_as_phy)
+		data |= BIT(9);
+	oct_csr_write(data, BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+
+	data = oct_csr_read(BGX_GMP_PCS_LINK_TIMER(priv->node, priv->bgx, priv->index));
+	clock_mhz = octeon_get_io_clock_rate() / 1000000;
+	if (priv->mode_1000basex)
+		data = (10000ull * clock_mhz) >> 10;
+	else
+		data = (1600ull * clock_mhz) >> 10;
+	oct_csr_write(data, BGX_GMP_PCS_LINK_TIMER(priv->node, priv->bgx, priv->index));
+
+	if (priv->mode_1000basex) {
+		data = oct_csr_read(BGX_GMP_PCS_AN_ADV(priv->node, priv->bgx, priv->index));
+		data &= ~(GENMASK_ULL(13, 12) | GENMASK_ULL(8, 7));
+		data |= 3 << 7;
+		data |= BIT(6) | BIT(5);
+		oct_csr_write(data, BGX_GMP_PCS_AN_ADV(priv->node, priv->bgx, priv->index));
+	} else if (priv->bgx_as_phy) {
+		data = oct_csr_read(BGX_GMP_PCS_SGM_AN_ADV(priv->node, priv->bgx, priv->index));
+		data |= BIT(12);
+		data &= ~(GENMASK_ULL(11, 10));
+		data |= 2 << 10;
+		oct_csr_write(data, BGX_GMP_PCS_SGM_AN_ADV(priv->node, priv->bgx, priv->index));
+	}
+
+	data = oct_csr_read(BGX_GMP_GMI_TX_APPEND(priv->node, priv->bgx, priv->index));
+	ctl = oct_csr_read(BGX_GMP_GMI_TX_SGMII_CTL(priv->node, priv->bgx, priv->index));
+	ctl &= ~BIT(0);
+	ctl |= (data & BIT(0)) ? 0 : 1;
+	oct_csr_write(ctl, BGX_GMP_GMI_TX_SGMII_CTL(priv->node, priv->bgx, priv->index));
+
+	if (priv->mode == PORT_MODE_RGMII) {
+		/* Disable XCV interface when initialized */
+		data = oct_csr_read(XCV_RESET(priv->node));
+		data &= ~(BIT(63) | BIT(3) | BIT(1));
+		oct_csr_write(data, XCV_RESET(priv->node));
+	}
+
+	return 0;
+}
+
+int bgx_get_tx_fifo_size(struct bgx_port_priv *priv)
+{
+	u64	data;
+	int	num_ports;
+
+	data = oct_csr_read(BGX_CMR_TX_LMACS(priv->node, priv->bgx));
+	num_ports = data & 7;
+
+	switch (num_ports) {
+	case 1:
+		return BGX_TX_FIFO_SIZE;
+	case 2:
+		return BGX_TX_FIFO_SIZE / 2;
+	case 3:
+	case 4:
+		return BGX_TX_FIFO_SIZE / 4;
+	default:
+		return 0;
+	}
+}
+
+static int bgx_xaui_hardware_init(struct bgx_port_priv *priv)
+{
+	u64	data;
+	u64	clock_mhz;
+	u64	tx_fifo_size;
+
+	if (octeon_is_simulation()) {
+		/* Enable the port */
+		data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+		data |= BIT(15);
+		oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	} else {
+		/* Reset the port */
+		data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+		data |= BIT(15);
+		oct_csr_write(data, BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+
+		/* Wait for reset to complete */
+		udelay(1);
+		data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+		if (data & BIT(15)) {
+			netdev_err(priv->netdev,
+				   "BGX%d:%d: SPU stuck in reset\n", priv->bgx, priv->node);
+			return -1;
+		}
+
+		/* Reset the SerDes lanes */
+		data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+		data |= BIT(11);
+		oct_csr_write(data, BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+
+		/* Disable packet reception */
+		data = oct_csr_read(BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+		data |= BIT(12);
+		oct_csr_write(data, BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+
+		/* Clear/disable interrupts */
+		data = oct_csr_read(BGX_SMU_RX_INT(priv->node, priv->bgx, priv->index));
+		oct_csr_write(data, BGX_SMU_RX_INT(priv->node, priv->bgx, priv->index));
+		data = oct_csr_read(BGX_SMU_TX_INT(priv->node, priv->bgx, priv->index));
+		oct_csr_write(data, BGX_SMU_TX_INT(priv->node, priv->bgx, priv->index));
+		data = oct_csr_read(BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+		oct_csr_write(data, BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+
+		if ((priv->mode == PORT_MODE_10G_KR ||
+		     priv->mode == PORT_MODE_40G_KR4) &&
+		    !OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+			oct_csr_write(0, BGX_SPU_BR_PMD_LP_CUP(priv->node, priv->bgx, priv->index));
+			oct_csr_write(0, BGX_SPU_BR_PMD_LD_CUP(priv->node, priv->bgx, priv->index));
+			oct_csr_write(0, BGX_SPU_BR_PMD_LD_REP(priv->node, priv->bgx, priv->index));
+			data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+			data |= BIT(1);
+			oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+		}
+	}
+
+	data = oct_csr_read(BGX_SMU_TX_APPEND(priv->node, priv->bgx, priv->index));
+	data |= BIT(3);
+	oct_csr_write(data, BGX_SMU_TX_APPEND(priv->node, priv->bgx, priv->index));
+
+	if (!octeon_is_simulation()) {
+		/* Disable fec */
+		data = oct_csr_read(BGX_SPU_FEC_CONTROL(priv->node, priv->bgx, priv->index));
+		data &= ~BIT(0);
+		oct_csr_write(data, BGX_SPU_FEC_CONTROL(priv->node, priv->bgx, priv->index));
+
+		/* Disable/configure auto negotiation */
+		data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+		data &= ~(BIT(13) | BIT(12));
+		oct_csr_write(data, BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+
+		data = oct_csr_read(BGX_SPU_AN_ADV(priv->node, priv->bgx, priv->index));
+		data &= ~(BIT(47) | BIT(26) | BIT(25) | BIT(22) | BIT(21) |
+			  BIT(13) | BIT(12));
+		data |= BIT(46);
+		if (priv->mode == PORT_MODE_40G_KR4)
+			data |= BIT(24);
+		else
+			data &= ~BIT(24);
+		if (priv->mode == PORT_MODE_10G_KR)
+			data |= BIT(23);
+		else
+			data &= ~BIT(23);
+		oct_csr_write(data, BGX_SPU_AN_ADV(priv->node, priv->bgx, priv->index));
+
+		data = oct_csr_read(BGX_SPU_DBG_CONTROL(priv->node, priv->bgx));
+		data |= BIT(29);
+		if (priv->mode == PORT_MODE_10G_KR ||
+		    priv->mode == PORT_MODE_40G_KR4)
+			data |= BIT(18);
+		else
+			data &= ~BIT(18);
+		oct_csr_write(data, BGX_SPU_DBG_CONTROL(priv->node, priv->bgx));
+
+		/* Enable the port */
+		data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+		data |= BIT(15);
+		oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && priv->index) {
+			/* BGX-22429 */
+			data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, 0));
+			data |= BIT(15);
+			oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, 0));
+		}
+	}
+
+	data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+	data &= ~BIT(11);
+	oct_csr_write(data, BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+
+	data = oct_csr_read(BGX_SMU_TX_CTL(priv->node, priv->bgx, priv->index));
+	data |= BIT(0);
+	data &= ~BIT(1);
+	oct_csr_write(data, BGX_SMU_TX_CTL(priv->node, priv->bgx, priv->index));
+
+	clock_mhz = octeon_get_io_clock_rate() / 1000000;
+	data = oct_csr_read(BGX_SPU_DBG_CONTROL(priv->node, priv->bgx));
+	data &= ~GENMASK_ULL(43, 32);
+	data |= (clock_mhz - 1) << 32;
+	oct_csr_write(data, BGX_SPU_DBG_CONTROL(priv->node, priv->bgx));
+
+	/* Fifo in 16-byte words */
+	tx_fifo_size = bgx_get_tx_fifo_size(priv);
+	tx_fifo_size >>= 4;
+	oct_csr_write(tx_fifo_size - 10, BGX_SMU_TX_THRESH(priv->node, priv->bgx, priv->index));
+
+	if (priv->mode == PORT_MODE_RXAUI && priv->phy_np) {
+		data = oct_csr_read(BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+		data |= BIT(10);
+		oct_csr_write(data, BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+	}
+
+	/* Some PHYs take up to 250ms to stabilize */
+	if (!octeon_is_simulation())
+		usleep_range(250000, 300000);
+
+	return 0;
+}
+
+/* Configure/initialize a bgx port. */
+static int bgx_port_init(struct bgx_port_priv *priv)
+{
+	u64	data;
+	int	rc = 0;
+
+	/* GSER-20956 */
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+	    (priv->mode == PORT_MODE_10G_KR ||
+	     priv->mode == PORT_MODE_XFI ||
+	     priv->mode == PORT_MODE_40G_KR4 ||
+	     priv->mode == PORT_MODE_XLAUI)) {
+		/* Disable link training */
+		data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+		data &= ~(1 << 1);
+		oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+	}
+
+	bgx_common_init_pknd(priv);
+
+	if (priv->mode == PORT_MODE_SGMII ||
+	    priv->mode == PORT_MODE_RGMII)
+		rc = bgx_xgmii_hardware_init(priv);
+	else
+		rc = bgx_xaui_hardware_init(priv);
+
+	return rc;
+}
+
+static int bgx_port_get_qlm_speed(struct bgx_port_priv	*priv,
+				  int			qlm)
+{
+	enum lane_mode	lmode;
+	u64		data;
+
+	data = oct_csr_read(GSER_LANE_MODE(priv->node, qlm));
+	lmode = data & 0xf;
+
+	switch (lmode) {
+	case R_25G_REFCLK100:
+		return 2500;
+	case R_5G_REFCLK100:
+		return 5000;
+	case R_8G_REFCLK100:
+		return 8000;
+	case R_125G_REFCLK15625_KX:
+		return 1250;
+	case R_3125G_REFCLK15625_XAUI:
+		return 3125;
+	case R_103125G_REFCLK15625_KR:
+		return 10312;
+	case R_125G_REFCLK15625_SGMII:
+		return 1250;
+	case R_5G_REFCLK15625_QSGMII:
+		return 5000;
+	case R_625G_REFCLK15625_RXAUI:
+		return 6250;
+	case R_25G_REFCLK125:
+		return 2500;
+	case R_5G_REFCLK125:
+		return 5000;
+	case R_8G_REFCLK125:
+		return 8000;
+	default:
+		return 0;
+	}
+}
+
+static struct port_status bgx_port_get_sgmii_link(struct bgx_port_priv *priv)
+{
+	struct port_status	status;
+	int			speed;
+
+	/* The simulator always uses a 1Gbps full duplex port */
+	if (octeon_is_simulation()) {
+		status.link = 1;
+		status.duplex = DUPLEX_FULL;
+		status.speed = 1000;
+	} else {
+		/* Use the qlm speed */
+		speed = bgx_port_get_qlm_speed(priv, priv->qlm);
+		status.link = 1;
+		status.duplex = DUPLEX_FULL;
+		status.speed = speed * 8 / 10;
+	}
+
+	return status;
+}
+
+static int bgx_port_xgmii_set_link_up(struct bgx_port_priv *priv)
+{
+	u64	data;
+	int	timeout;
+
+	if (!octeon_is_simulation()) {
+		/* PCS reset sequence */
+		data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+		data |= BIT(15);
+		oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+
+		/* Wait for reset to complete */
+		udelay(1);
+		data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+		if (data & BIT(15)) {
+			netdev_err(priv->netdev,
+				   "BGX%d:%d: PCS stuck in reset\n", priv->bgx, priv->node);
+			return -1;
+		}
+	}
+
+	/* Autonegotiation */
+	if (priv->phy_np) {
+		data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+		data |= BIT(9);
+		if (priv->mode != PORT_MODE_RGMII)
+			data |= BIT(12);
+		else
+			data &= ~BIT(12);
+		data &= ~BIT(11);
+		oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+	} else {
+		data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+		data |= BIT(6);
+		data &= ~(BIT(13) | BIT(12) | BIT(11));
+		oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+	}
+
+	data = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+	data &= ~(BIT(9) | BIT(8));
+	if (priv->mode_1000basex)
+		data |= BIT(8);
+	if (priv->bgx_as_phy)
+		data |= BIT(9);
+	oct_csr_write(data, BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+
+	/* Wait for autonegotiation to complete */
+	if (!octeon_is_simulation() && !priv->bgx_as_phy &&
+	    priv->mode != PORT_MODE_RGMII) {
+		timeout = 10000;
+		do {
+			data = oct_csr_read(BGX_GMP_PCS_MR_STATUS(priv->node, priv->bgx, priv->index));
+			if (data & BIT(5))
+				break;
+			timeout--;
+			udelay(1);
+		} while (timeout);
+		if (!timeout) {
+			netdev_err(priv->netdev, "BGX%d:%d: AN timeout\n", priv->bgx, priv->node);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static void bgx_port_rgmii_set_link_down(struct bgx_port_priv *priv)
+{
+	u64	data;
+	int	rx_fifo_len;
+
+	data = oct_csr_read(XCV_RESET(priv->node));
+	data &= ~BIT(1);
+	oct_csr_write(data, XCV_RESET(priv->node));
+	/* Is this read really needed? TODO */
+	data = oct_csr_read(XCV_RESET(priv->node));
+
+	/* Wait for 2 MTUs */
+	mdelay(10);
+
+	data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	data &= ~BIT(14);
+	oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+	/* Wait for the rx and tx fifos to drain */
+	do {
+		data = oct_csr_read(BGX_CMR_RX_FIFO_LEN(priv->node, priv->bgx, priv->index));
+		rx_fifo_len = data & 0x1fff;
+		data = oct_csr_read(BGX_CMR_TX_FIFO_LEN(priv->node, priv->bgx, priv->index));
+	} while (rx_fifo_len > 0 || !(data & BIT(13)));
+
+	data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	data &= ~BIT(13);
+	oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+	data = oct_csr_read(XCV_RESET(priv->node));
+	data &= ~BIT(3);
+	oct_csr_write(data, XCV_RESET(priv->node));
+
+	data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+	data |= BIT(11);
+	oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+}
+
+static void bgx_port_sgmii_set_link_down(struct bgx_port_priv *priv)
+{
+	u64	data;
+
+	data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	data &= ~(BIT(14) | BIT(13));
+	oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+	data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+	data &= ~BIT(12);
+	oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+
+	data = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+	data |= BIT(11);
+	oct_csr_write(data, BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+	data = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+}
+
+static int bgx_port_sgmii_set_link_speed(struct bgx_port_priv *priv, struct port_status status)
+{
+	u64	data;
+	u64	prtx;
+	u64	miscx;
+	int	timeout;
+
+	data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	data &= ~(BIT(14) | BIT(13));
+	oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+	timeout = 10000;
+	do {
+		prtx = oct_csr_read(BGX_GMP_GMI_PRT_CFG(priv->node, priv->bgx, priv->index));
+		if (prtx & BIT(13) && prtx & BIT(12))
+			break;
+		timeout--;
+		udelay(1);
+	} while (timeout);
+	if (!timeout) {
+		netdev_err(priv->netdev, "BGX%d:%d: GMP idle timeout\n", priv->bgx, priv->node);
+		return -1;
+	}
+
+	prtx = oct_csr_read(BGX_GMP_GMI_PRT_CFG(priv->node, priv->bgx, priv->index));
+	miscx = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+	if (status.link) {
+		miscx &= ~BIT(11);
+		if (status.duplex == DUPLEX_FULL)
+			prtx |= BIT(2);
+		else
+			prtx &= ~BIT(2);
+	} else {
+		miscx |= BIT(11);
+	}
+
+	switch (status.speed) {
+	case 10:
+		prtx &= ~(BIT(3) | BIT(1));
+		prtx |= BIT(8);
+		miscx &= ~GENMASK_ULL(6, 0);
+		miscx |= 25;
+		oct_csr_write(64, BGX_GMP_GMI_TX_SLOT(priv->node, priv->bgx, priv->index));
+		oct_csr_write(0, BGX_GMP_GMI_TX_BURST(priv->node, priv->bgx, priv->index));
+		break;
+	case 100:
+		prtx &= ~(BIT(8) | BIT(3) | BIT(1));
+		miscx &= ~GENMASK_ULL(6, 0);
+		miscx |= 5;
+		oct_csr_write(64, BGX_GMP_GMI_TX_SLOT(priv->node, priv->bgx, priv->index));
+		oct_csr_write(0, BGX_GMP_GMI_TX_BURST(priv->node, priv->bgx, priv->index));
+		break;
+	case 1000:
+		prtx |= (BIT(3) | BIT(1));
+		prtx &= ~BIT(8);
+		miscx &= ~GENMASK_ULL(6, 0);
+		miscx |= 1;
+		oct_csr_write(512, BGX_GMP_GMI_TX_SLOT(priv->node, priv->bgx, priv->index));
+		if (status.duplex == DUPLEX_FULL)
+			oct_csr_write(0, BGX_GMP_GMI_TX_BURST(priv->node, priv->bgx, priv->index));
+		else
+			oct_csr_write(8192, BGX_GMP_GMI_TX_BURST(priv->node, priv->bgx, priv->index));
+		break;
+	default:
+		break;
+	}
+
+	oct_csr_write(miscx, BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+	oct_csr_write(prtx, BGX_GMP_GMI_PRT_CFG(priv->node, priv->bgx, priv->index));
+	/* This read verifies the write completed */
+	prtx = oct_csr_read(BGX_GMP_GMI_PRT_CFG(priv->node, priv->bgx, priv->index));
+
+	data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	data |= (BIT(14) | BIT(13));
+	oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+	return 0;
+}
+
+static int bgx_port_rgmii_set_link_speed(struct bgx_port_priv *priv, struct port_status status)
+{
+	u64	data;
+	int	speed;
+	bool	speed_changed = false;
+	bool	int_lpbk = false;
+	bool	do_credits;
+
+	switch (status.speed) {
+	case 10:
+		speed = 0;
+		break;
+	case 100:
+		speed = 1;
+		break;
+	case 1000:
+	default:
+		speed = 2;
+		break;
+	}
+
+	/* Do credits if link came up */
+	data = oct_csr_read(XCV_RESET(priv->node));
+	do_credits = status.link && !(data & BIT(63));
+
+	/* Was there a speed change */
+	data = oct_csr_read(XCV_CTL(priv->node));
+	if ((data & GENMASK_ULL(1, 0)) != speed)
+		speed_changed = true;
+
+	/* Clear clkrst when in internal loopback */
+	if (data & BIT(2)) {
+		int_lpbk = true;
+		data = oct_csr_read(XCV_RESET(priv->node));
+		data &= ~BIT(15);
+		oct_csr_write(data, XCV_RESET(priv->node));
+	}
+
+	/* Link came up or there was a speed change */
+	data = oct_csr_read(XCV_RESET(priv->node));
+	if (status.link && (!(data & BIT(63)) || speed_changed)) {
+		data |= BIT(63);
+		oct_csr_write(data, XCV_RESET(priv->node));
+
+		data = oct_csr_read(XCV_CTL(priv->node));
+		data &= ~GENMASK_ULL(1, 0);
+		data |= speed;
+		oct_csr_write(data, XCV_CTL(priv->node));
+
+		data = oct_csr_read(XCV_DLL_CTL(priv->node));
+		data |= BIT(23);
+		data &= ~GENMASK_ULL(22, 16);
+		data &= ~BIT(15);
+		oct_csr_write(data, XCV_DLL_CTL(priv->node));
+
+		data = oct_csr_read(XCV_DLL_CTL(priv->node));
+		data &= ~GENMASK_ULL(1, 0);
+		oct_csr_write(data, XCV_DLL_CTL(priv->node));
+
+		data = oct_csr_read(XCV_RESET(priv->node));
+		data &= ~BIT(11);
+		oct_csr_write(data, XCV_RESET(priv->node));
+
+		usleep_range(10, 100);
+
+		data = oct_csr_read(XCV_COMP_CTL(priv->node));
+		data &= ~BIT(63);
+		oct_csr_write(data, XCV_COMP_CTL(priv->node));
+
+		data = oct_csr_read(XCV_RESET(priv->node));
+		data |= BIT(7);
+		oct_csr_write(data, XCV_RESET(priv->node));
+
+		data = oct_csr_read(XCV_RESET(priv->node));
+		if (int_lpbk)
+			data &= ~BIT(15);
+		else
+			data |= BIT(15);
+		oct_csr_write(data, XCV_RESET(priv->node));
+
+		data = oct_csr_read(XCV_RESET(priv->node));
+		data |= BIT(2) | BIT(0);
+		oct_csr_write(data, XCV_RESET(priv->node));
+	}
+
+	data = oct_csr_read(XCV_RESET(priv->node));
+	if (status.link)
+		data |= BIT(3) | BIT(1);
+	else
+		data &= ~(BIT(3) | BIT(1));
+	oct_csr_write(data, XCV_RESET(priv->node));
+
+	if (!status.link) {
+		mdelay(10);
+		oct_csr_write(0, XCV_RESET(priv->node));
+	}
+
+	/* Grant pko tx credits */
+	if (do_credits) {
+		data = oct_csr_read(XCV_BATCH_CRD_RET(priv->node));
+		data |= BIT(0);
+		oct_csr_write(data, XCV_BATCH_CRD_RET(priv->node));
+	}
+
+	return 0;
+}
+
+static int bgx_port_set_xgmii_link(struct bgx_port_priv *priv,
+				   struct port_status status)
+{
+	u64	data;
+	int	rc = 0;
+
+	if (status.link) {
+		/* Link up */
+		data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+		data |= BIT(15);
+		oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+		/* BGX-22429 */
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && priv->index) {
+			data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, 0));
+			data |= BIT(15);
+			oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, 0));
+		}
+
+		rc = bgx_port_xgmii_set_link_up(priv);
+		if (rc)
+			return rc;
+		rc = bgx_port_sgmii_set_link_speed(priv, status);
+		if (rc)
+			return rc;
+		if (priv->mode == PORT_MODE_RGMII)
+			rc = bgx_port_rgmii_set_link_speed(priv, status);
+	} else {
+		/* Link down */
+		if (priv->mode == PORT_MODE_RGMII) {
+			bgx_port_rgmii_set_link_down(priv);
+			rc = bgx_port_sgmii_set_link_speed(priv, status);
+			if (rc)
+				return rc;
+			rc = bgx_port_rgmii_set_link_speed(priv, status);
+		} else {
+			bgx_port_sgmii_set_link_down(priv);
+		}
+	}
+
+	return rc;
+}
+
+static struct port_status bgx_port_get_xaui_link(struct bgx_port_priv *priv)
+{
+	struct port_status	status;
+	int			speed;
+	int			lanes;
+	u64			data;
+
+	status.link = 0;
+	status.duplex = DUPLEX_HALF;
+	status.speed = 0;
+
+	/* Get the link state */
+	data = oct_csr_read(BGX_SMU_TX_CTL(priv->node, priv->bgx, priv->index));
+	data &= GENMASK_ULL(5, 4);
+	if (!data) {
+		data = oct_csr_read(BGX_SMU_RX_CTL(priv->node, priv->bgx, priv->index));
+		data &= GENMASK_ULL(1, 0);
+		if (!data) {
+			data = oct_csr_read(BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+			if (data & BIT(2))
+				status.link = 1;
+		}
+	}
+
+	if (status.link) {
+		/* Always full duplex */
+		status.duplex = DUPLEX_FULL;
+
+		/* Speed */
+		speed = bgx_port_get_qlm_speed(priv, priv->qlm);
+		data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+		switch ((data >> 8) & 7) {
+		default:
+		case 1:
+			speed = (speed * 8 + 5) / 10;
+			lanes = 4;
+			break;
+		case 2:
+			speed = (speed * 8 + 5) / 10;
+			lanes = 2;
+			break;
+		case 3:
+			speed = (speed * 64 + 33) / 66;
+			lanes = 1;
+			break;
+		case 4:
+			if (speed == 6250)
+				speed = 6445;
+			speed = (speed * 64 + 33) / 66;
+			lanes = 4;
+			break;
+		}
+
+		speed *= lanes;
+		status.speed = speed;
+	}
+
+	return status;
+}
+
+static int bgx_port_init_xaui_an(struct bgx_port_priv *priv)
+{
+	u64	data;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+		data = oct_csr_read(BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+		/* If autonegotiation is no good */
+		if (!(data & BIT(11))) {
+			data = BIT(12) | BIT(11) | BIT(10);
+			oct_csr_write(data, BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+
+			data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+			data |= BIT(9);
+			oct_csr_write(data, BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+			return -1;
+		}
+	} else {
+		data = oct_csr_read(BGX_SPU_AN_STATUS(priv->node, priv->bgx, priv->index));
+		/* If autonegotiation hasn't completed */
+		if (!(data & BIT(5))) {
+			data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+			data |= BIT(9);
+			oct_csr_write(data, BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static void bgx_port_xaui_start_training(struct bgx_port_priv *priv)
+{
+	u64	data;
+
+	data = BIT(14) | BIT(13);
+	oct_csr_write(data, BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+
+	/* BGX-20968 */
+	oct_csr_write(0, BGX_SPU_BR_PMD_LP_CUP(priv->node, priv->bgx, priv->index));
+	oct_csr_write(0, BGX_SPU_BR_PMD_LD_CUP(priv->node, priv->bgx, priv->index));
+	oct_csr_write(0, BGX_SPU_BR_PMD_LD_REP(priv->node, priv->bgx, priv->index));
+	data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+	data &= ~BIT(12);
+	oct_csr_write(data, BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+	udelay(1);
+
+	data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+	data |= BIT(1);
+	oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+	udelay(1);
+
+	data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+	data |= BIT(0);
+	oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+}
+
+static int bgx_port_gser_27882(struct bgx_port_priv *priv)
+{
+	u64	data;
+	u64	addr;
+	int	timeout;
+
+	timeout = 200;
+	do {
+		data = oct_csr_read(GSER_RX_EIE_DETSTS(priv->node, priv->qlm));
+		if (data & (1 << (priv->index + 8)))
+			break;
+		timeout--;
+		udelay(1);
+	} while (timeout);
+	if (!timeout)
+		return -1;
+
+	addr = GSER_LANE_PCS_CTLIFC_0(priv->node, priv->qlm, priv->index);
+	data = oct_csr_read(addr);
+	data |= BIT(12);
+	oct_csr_write(data, addr);
+
+	addr = GSER_LANE_PCS_CTLIFC_2(priv->node, priv->qlm, priv->index);
+	data = oct_csr_read(addr);
+	data |= BIT(7);
+	oct_csr_write(data, addr);
+
+	data = oct_csr_read(addr);
+	data |= BIT(15);
+	oct_csr_write(data, addr);
+
+	data = oct_csr_read(addr);
+	data &= ~BIT(7);
+	oct_csr_write(data, addr);
+
+	data = oct_csr_read(addr);
+	data |= BIT(15);
+	oct_csr_write(data, addr);
+
+	return 0;
+}
+
+static void bgx_port_xaui_restart_training(struct bgx_port_priv *priv)
+{
+	u64	data;
+
+	data = BIT(14) | BIT(13);
+	oct_csr_write(data, BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+	usleep_range(1700, 2000);
+
+	/* BGX-20968 */
+	oct_csr_write(0, BGX_SPU_BR_PMD_LP_CUP(priv->node, priv->bgx, priv->index));
+	oct_csr_write(0, BGX_SPU_BR_PMD_LD_CUP(priv->node, priv->bgx, priv->index));
+	oct_csr_write(0, BGX_SPU_BR_PMD_LD_REP(priv->node, priv->bgx, priv->index));
+
+	/* Restart training */
+	data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+	data |= BIT(0);
+	oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+}
+
+static int bgx_port_get_max_qlm_lanes(int qlm)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN73XX))
+		return (qlm < 4) ? 4 : 2;
+	else if (OCTEON_IS_MODEL(OCTEON_CNF75XX))
+		return 2;
+	return 4;
+}
+
+static int bgx_port_qlm_rx_equalization(struct bgx_port_priv *priv, int qlm, int lane)
+{
+	u64	data;
+	u64	addr;
+	u64	lmode;
+	int	max_lanes = bgx_port_get_max_qlm_lanes(qlm);
+	int	lane_mask = lane == -1 ? ((1 << max_lanes) - 1) : (1 << lane);
+	int	timeout;
+	int	i;
+	int	rc = 0;
+
+	/* Nothing to do for qlms in reset */
+	data = oct_csr_read(GSER_PHY_CTL(priv->node, qlm));
+	if (data & (BIT(0) | BIT(1)))
+		return -1;
+
+	for (i = 0; i < max_lanes; i++) {
+		if (!(i & lane_mask))
+			continue;
+
+		addr = GSER_LANE_LBERT_CFG(priv->node, qlm, i);
+		data = oct_csr_read(addr);
+		/* Rx equalization can't be completed while pattern matcher is
+		 * enabled because it causes errors.
+		 */
+		if (data & BIT(6))
+			return -1;
+	}
+
+	lmode = oct_csr_read(GSER_LANE_MODE(priv->node, qlm));
+	lmode &= 0xf;
+	addr = GSER_LANE_P_MODE_1(priv->node, qlm, lmode);
+	data = oct_csr_read(addr);
+	/* Don't complete rx equalization if in VMA manual mode */
+	if (data & BIT(14))
+		return 0;
+
+	/* Apply rx equalization for speed > 6250 */
+	if (bgx_port_get_qlm_speed(priv, qlm) < 6250)
+		return 0;
+
+	/* Wait until rx data is valid (CDRLOCK) */
+	timeout = 500;
+	addr = GSER_RX_EIE_DETSTS(priv->node, qlm);
+	do {
+		data = oct_csr_read(addr);
+		data >>= 8;
+		data &= lane_mask;
+		if (data == lane_mask)
+			break;
+		timeout--;
+		udelay(1);
+	} while (timeout);
+	if (!timeout) {
+		pr_debug("QLM%d:%d: CDRLOCK timeout\n", qlm, priv->node);
+		return -1;
+	}
+
+	bgx_port_gser_20075(priv, qlm, lane);
+
+	for (i = 0; i < max_lanes; i++) {
+		if (!(i & lane_mask))
+			continue;
+		/* Skip lane 3 on 78p1.x due to gser-20075. Handled above */
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && i == 3)
+			continue;
+
+		/* Enable software control */
+		addr = GSER_BR_RX_CTL(priv->node, qlm, i);
+		data = oct_csr_read(addr);
+		data |= BIT(2);
+		oct_csr_write(data, addr);
+
+		/* Clear the completion flag */
+		addr = GSER_BR_RX_EER(priv->node, qlm, i);
+		data = oct_csr_read(addr);
+		data &= ~BIT(14);
+		data |= BIT(15);
+		oct_csr_write(data, addr);
+	}
+
+	/* Wait for rx equalization to complete */
+	for (i = 0; i < max_lanes; i++) {
+		if (!(i & lane_mask))
+			continue;
+
+		timeout = 250000;
+		addr = GSER_BR_RX_EER(priv->node, qlm, i);
+		do {
+			data = oct_csr_read(addr);
+			if (data & BIT(14))
+				break;
+			timeout--;
+			udelay(1);
+		} while (timeout);
+		if (!timeout) {
+			pr_debug("QLM%d:%d: RXT_ESV timeout\n",
+				 qlm, priv->node);
+			rc = -1;
+		}
+
+		/* Switch back to hardware control */
+		addr = GSER_BR_RX_CTL(priv->node, qlm, i);
+		data = oct_csr_read(addr);
+		data &= ~BIT(2);
+		oct_csr_write(data, addr);
+	}
+
+	return rc;
+}
+
+static int bgx_port_xaui_equalization(struct bgx_port_priv *priv)
+{
+	u64	data;
+	int	lane;
+
+	/* Nothing to do for loopback mode */
+	data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx,
+					     priv->index));
+	if (data & BIT(14))
+		return 0;
+
+	if (priv->mode == PORT_MODE_XAUI || priv->mode == PORT_MODE_XLAUI) {
+		if (bgx_port_qlm_rx_equalization(priv, priv->qlm, -1))
+			return -1;
+
+		/* BGX2 of 73xx uses 2 dlms */
+		if (OCTEON_IS_MODEL(OCTEON_CN73XX) && priv->bgx == 2) {
+			if (bgx_port_qlm_rx_equalization(priv, priv->qlm + 1, -1))
+				return -1;
+		}
+	} else if (priv->mode == PORT_MODE_RXAUI) {
+		/* Rxaui always uses 2 lanes */
+		if (bgx_port_qlm_rx_equalization(priv, priv->qlm, -1))
+			return -1;
+	} else if (priv->mode == PORT_MODE_XFI) {
+		lane = priv->index;
+		if ((OCTEON_IS_MODEL(OCTEON_CN73XX) && priv->qlm == 6) ||
+		    (OCTEON_IS_MODEL(OCTEON_CNF75XX) && priv->qlm == 5))
+			lane -= 2;
+
+		if (bgx_port_qlm_rx_equalization(priv, priv->qlm, lane))
+			return -1;
+	}
+
+	return 0;
+}
+
+static int bgx_port_init_xaui_link(struct bgx_port_priv *priv)
+{
+	u64	data;
+	int	use_training = 0;
+	int	use_ber = 0;
+	int	timeout;
+	int	rc = 0;
+
+	if (priv->mode == PORT_MODE_10G_KR || priv->mode == PORT_MODE_40G_KR4)
+		use_training = 1;
+
+	if (!octeon_is_simulation() &&
+	    (priv->mode == PORT_MODE_XFI || priv->mode == PORT_MODE_XLAUI ||
+	     priv->mode == PORT_MODE_10G_KR || priv->mode == PORT_MODE_40G_KR4))
+		use_ber = 1;
+
+	data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	data &= ~(BIT(14) | BIT(13));
+	oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+	data = oct_csr_read(BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+	data |= BIT(12);
+	oct_csr_write(data, BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+
+	if (!octeon_is_simulation()) {
+		data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+		/* Restart autonegotiation */
+		if (data & BIT(12)) {
+			rc = bgx_port_init_xaui_an(priv);
+			if (rc)
+				return rc;
+		}
+
+		if (use_training) {
+			data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+			/* Check if training is enabled */
+			if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+			    !(data & BIT(1))) {
+				bgx_port_xaui_start_training(priv);
+				return -1;
+			}
+
+			if (OCTEON_IS_MODEL(OCTEON_CN73XX) ||
+			    OCTEON_IS_MODEL(OCTEON_CNF75XX) ||
+			    OCTEON_IS_MODEL(OCTEON_CN78XX))
+				bgx_port_gser_27882(priv);
+
+			data = oct_csr_read(BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+
+			/* Restart training if it failed */
+			if ((data & BIT(14)) &&
+			    !OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+				bgx_port_xaui_restart_training(priv);
+				return -1;
+			}
+
+			if (!(data & BIT(13))) {
+				pr_debug("Waiting for link training\n");
+				return -1;
+			}
+		} else {
+			bgx_port_xaui_equalization(priv);
+		}
+
+		/* Wait until the reset is complete */
+		timeout = 10000;
+		do {
+			data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+			if (!(data & BIT(15)))
+				break;
+			timeout--;
+			udelay(1);
+		} while (timeout);
+		if (!timeout) {
+			pr_debug("BGX%d:%d:%d: Reset timeout\n", priv->bgx,
+				 priv->index, priv->node);
+			return -1;
+		}
+
+		if (use_ber) {
+			timeout = 10000;
+			do {
+				data =
+				oct_csr_read(BGX_SPU_BR_STATUS1(priv->node, priv->bgx, priv->index));
+				if (data & BIT(0))
+					break;
+				timeout--;
+				udelay(1);
+			} while (timeout);
+			if (!timeout) {
+				pr_debug("BGX%d:%d:%d: BLK_LOCK timeout\n",
+					 priv->bgx, priv->index, priv->node);
+				return -1;
+			}
+		} else {
+			timeout = 10000;
+			do {
+				data =
+				oct_csr_read(BGX_SPU_BX_STATUS(priv->node, priv->bgx, priv->index));
+				if (data & BIT(12))
+					break;
+				timeout--;
+				udelay(1);
+			} while (timeout);
+			if (!timeout) {
+				pr_debug("BGX%d:%d:%d: Lanes align timeout\n",
+					 priv->bgx, priv->index, priv->node);
+				return -1;
+			}
+		}
+
+		if (use_ber) {
+			data = oct_csr_read(BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+			data |= BIT(15);
+			oct_csr_write(data, BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+		}
+
+		data = oct_csr_read(BGX_SPU_STATUS2(priv->node, priv->bgx, priv->index));
+		data |= BIT(10);
+		oct_csr_write(data, BGX_SPU_STATUS2(priv->node, priv->bgx, priv->index));
+
+		data = oct_csr_read(BGX_SPU_STATUS2(priv->node, priv->bgx, priv->index));
+		if (data & BIT(10)) {
+			if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+			    use_training)
+				bgx_port_xaui_restart_training(priv);
+			return -1;
+		}
+
+		/* Wait for mac rx to be ready */
+		timeout = 10000;
+		do {
+			data = oct_csr_read(BGX_SMU_RX_CTL(priv->node, priv->bgx, priv->index));
+			data &= GENMASK_ULL(1, 0);
+			if (!data)
+				break;
+			timeout--;
+			udelay(1);
+		} while (timeout);
+		if (!timeout) {
+			pr_debug("BGX%d:%d:%d: mac ready timeout\n",
+				 priv->bgx, priv->index, priv->node);
+			return -1;
+		}
+
+		/* Wait for bgx rx to be idle */
+		timeout = 10000;
+		do {
+			data = oct_csr_read(BGX_SMU_CTRL(priv->node, priv->bgx, priv->index));
+			if (data & BIT(0))
+				break;
+			timeout--;
+			udelay(1);
+		} while (timeout);
+		if (!timeout) {
+			pr_debug("BGX%d:%d:%d: rx idle timeout\n",
+				 priv->bgx, priv->index, priv->node);
+			return -1;
+		}
+
+		/* Wait for gmx tx to be idle */
+		timeout = 10000;
+		do {
+			data = oct_csr_read(BGX_SMU_CTRL(priv->node, priv->bgx, priv->index));
+			if (data & BIT(1))
+				break;
+			timeout--;
+			udelay(1);
+		} while (timeout);
+		if (!timeout) {
+			pr_debug("BGX%d:%d:%d: tx idle timeout\n",
+				 priv->bgx, priv->index, priv->node);
+			return -1;
+		}
+
+		/* Check rcvflt is still be 0 */
+		data = oct_csr_read(BGX_SPU_STATUS2(priv->node, priv->bgx, priv->index));
+		if (data & BIT(10)) {
+			pr_debug("BGX%d:%d:%d: receive fault\n",
+				 priv->bgx, priv->index, priv->node);
+			return -1;
+		}
+
+		/* Receive link is latching low. Force it high and verify it */
+		data = oct_csr_read(BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+		data |= BIT(2);
+		oct_csr_write(data, BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+		timeout = 10000;
+		do {
+			data = oct_csr_read(BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+			if (data & BIT(2))
+				break;
+			timeout--;
+			udelay(1);
+		} while (timeout);
+		if (!timeout) {
+			pr_debug("BGX%d:%d:%d: rx link down\n",
+				 priv->bgx, priv->index, priv->node);
+			return -1;
+		}
+	}
+
+	if (use_ber) {
+		/* Read error counters to clear */
+		data = oct_csr_read(BGX_SPU_BR_BIP_ERR_CNT(priv->node, priv->bgx, priv->index));
+		data = oct_csr_read(BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+
+		/* Verify latch lock is set */
+		if (!(data & BIT(15))) {
+			pr_debug("BGX%d:%d:%d: latch lock lost\n",
+				 priv->bgx, priv->index, priv->node);
+			return -1;
+		}
+
+		/* LATCHED_BER is cleared by writing 1 to it */
+		if (data & BIT(14))
+			oct_csr_write(data, BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+
+		usleep_range(1500, 2000);
+		data = oct_csr_read(BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+		if (data & BIT(14)) {
+			pr_debug("BGX%d:%d:%d: BER test failed\n",
+				 priv->bgx, priv->index, priv->node);
+			return -1;
+		}
+	}
+
+	/* Enable packet transmit and receive */
+	data = oct_csr_read(BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+	data &= ~BIT(12);
+	oct_csr_write(data, BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+	data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	data |= BIT(14) | BIT(13);
+	oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+	return 0;
+}
+
+static int bgx_port_set_xaui_link(struct bgx_port_priv *priv,
+				  struct port_status status)
+{
+	u64	data;
+	bool	smu_tx_ok = false;
+	bool	smu_rx_ok = false;
+	bool	spu_link_ok = false;
+	int	rc = 0;
+
+	/* Initialize hardware if link is up but hardware is not happy */
+	if (status.link) {
+		data = oct_csr_read(BGX_SMU_TX_CTL(priv->node, priv->bgx, priv->index));
+		data &= GENMASK_ULL(5, 4);
+		smu_tx_ok = data == 0;
+
+		data = oct_csr_read(BGX_SMU_RX_CTL(priv->node, priv->bgx, priv->index));
+		data &= GENMASK_ULL(1, 0);
+		smu_rx_ok = data == 0;
+
+		data = oct_csr_read(BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+		data &= BIT(2);
+		spu_link_ok = data == BIT(2);
+
+		if (!smu_tx_ok || !smu_rx_ok || !spu_link_ok)
+			rc = bgx_port_init_xaui_link(priv);
+	}
+
+	return rc;
+}
+
+static struct bgx_port_priv *bgx_port_netdev2priv(struct net_device *netdev)
+{
+	struct bgx_port_netdev_priv *nd_priv = netdev_priv(netdev);
+
+	return nd_priv->bgx_priv;
+}
+
+void bgx_port_set_netdev(struct device *dev, struct net_device *netdev)
+{
+	struct bgx_port_priv *priv = dev_get_drvdata(dev);
+
+	if (netdev) {
+		struct bgx_port_netdev_priv *nd_priv = netdev_priv(netdev);
+
+		nd_priv->bgx_priv = priv;
+	}
+
+	priv->netdev = netdev;
+}
+EXPORT_SYMBOL(bgx_port_set_netdev);
+
+int bgx_port_ethtool_get_link_ksettings(struct net_device *netdev,
+					struct ethtool_link_ksettings *cmd)
+{
+	struct bgx_port_priv	*priv = bgx_port_netdev2priv(netdev);
+
+	if (priv->phydev) {
+		phy_ethtool_ksettings_get(priv->phydev, cmd);
+		return 0;
+	}
+	return -EINVAL;
+}
+EXPORT_SYMBOL(bgx_port_ethtool_get_link_ksettings);
+
+int bgx_port_ethtool_set_settings(struct net_device	*netdev,
+				  struct ethtool_cmd	*cmd)
+{
+	struct bgx_port_priv *p = bgx_port_netdev2priv(netdev);
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (p->phydev)
+		return phy_ethtool_sset(p->phydev, cmd);
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(bgx_port_ethtool_set_settings);
+
+int bgx_port_ethtool_nway_reset(struct net_device *netdev)
+{
+	struct bgx_port_priv *p = bgx_port_netdev2priv(netdev);
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (p->phydev)
+		return phy_start_aneg(p->phydev);
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(bgx_port_ethtool_nway_reset);
+
+const u8 *bgx_port_get_mac(struct net_device *netdev)
+{
+	struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+
+	return priv->mac_addr;
+}
+EXPORT_SYMBOL(bgx_port_get_mac);
+
+int bgx_port_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	struct bgx_port_priv *p = bgx_port_netdev2priv(netdev);
+
+	if (p->phydev)
+		return phy_mii_ioctl(p->phydev, ifr, cmd);
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(bgx_port_do_ioctl);
+
+static void bgx_port_write_cam(struct bgx_port_priv	*priv,
+			       int			cam,
+			       const u8			*mac)
+{
+	u64	m = 0;
+	int	i;
+
+	if (mac) {
+		for (i = 0; i < 6; i++)
+			m |= (((u64)mac[i]) << ((5 - i) * 8));
+		m |= BIT(48);
+	}
+
+	m |= (u64)priv->index << 52;
+	oct_csr_write(m, BGX_CMR_RX_ADRX_CAM(priv->node, priv->bgx, priv->index * 8 + cam));
+}
+
+/* Set MAC address for the net_device that is attached. */
+void bgx_port_set_rx_filtering(struct net_device *netdev)
+{
+	u64	data;
+	struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+	int available_cam_entries, current_cam_entry;
+	struct netdev_hw_addr *ha;
+
+	available_cam_entries = 8;
+	data = 0;
+	data |= BIT(0); /* Accept all Broadcast*/
+
+	if ((netdev->flags & IFF_PROMISC) || netdev->uc.count > 7) {
+		data &= ~BIT(3); /* Reject CAM match */
+		available_cam_entries = 0;
+	} else {
+		/* One CAM entry for the primary address, leaves seven
+		 * for the secondary addresses.
+		 */
+		data |= BIT(3); /* Accept CAM match */
+		available_cam_entries = 7 - netdev->uc.count;
+	}
+
+	if (netdev->flags & IFF_PROMISC) {
+		data |= 1 << 1; /* Accept all Multicast */
+	} else {
+		if (netdev->flags & IFF_MULTICAST) {
+			if ((netdev->flags & IFF_ALLMULTI) ||
+			    netdev_mc_count(netdev) > available_cam_entries)
+				data |= 1 << 1; /* Accept all Multicast */
+			else
+				data |= 2 << 1; /* Accept all Mcast via CAM */
+		}
+	}
+	current_cam_entry = 0;
+	if (data & BIT(3)) {
+		bgx_port_write_cam(priv, current_cam_entry, netdev->dev_addr);
+		current_cam_entry++;
+		netdev_for_each_uc_addr(ha, netdev) {
+			bgx_port_write_cam(priv, current_cam_entry, ha->addr);
+			current_cam_entry++;
+		}
+	}
+	if (((data & GENMASK_ULL(2, 1)) >> 1) == 2) {
+		/* Accept all Multicast via CAM */
+		netdev_for_each_mc_addr(ha, netdev) {
+			bgx_port_write_cam(priv, current_cam_entry, ha->addr);
+			current_cam_entry++;
+		}
+	}
+	while (current_cam_entry < 8) {
+		bgx_port_write_cam(priv, current_cam_entry, NULL);
+		current_cam_entry++;
+	}
+	oct_csr_write(data, BGX_CMR_RX_ADR_CTL(priv->node, priv->bgx,
+					       priv->index));
+}
+EXPORT_SYMBOL(bgx_port_set_rx_filtering);
+
+static void bgx_port_adjust_link(struct net_device *netdev)
+{
+	struct bgx_port_priv	*priv = bgx_port_netdev2priv(netdev);
+	int			link_changed = 0;
+	unsigned int		link;
+	unsigned int		speed;
+	unsigned int		duplex;
+
+	mutex_lock(&priv->lock);
+
+	if (!priv->phydev->link && priv->last_status.link)
+		link_changed = -1;
+
+	if (priv->phydev->link &&
+	    (priv->last_status.link != priv->phydev->link ||
+	     priv->last_status.duplex != priv->phydev->duplex ||
+	     priv->last_status.speed != priv->phydev->speed))
+		link_changed = 1;
+
+	link = priv->phydev->link;
+	priv->last_status.link = priv->phydev->link;
+
+	speed = priv->phydev->speed;
+	priv->last_status.speed = priv->phydev->speed;
+
+	duplex = priv->phydev->duplex;
+	priv->last_status.duplex = priv->phydev->duplex;
+
+	mutex_unlock(&priv->lock);
+
+	if (link_changed != 0) {
+		struct port_status status;
+
+		if (link_changed > 0) {
+			netdev_info(netdev, "Link is up - %d/%s\n",
+				    priv->phydev->speed,
+				    priv->phydev->duplex == DUPLEX_FULL ?
+				    "Full" : "Half");
+		} else {
+			netdev_info(netdev, "Link is down\n");
+		}
+		status.link = link ? 1 : 0;
+		status.duplex = duplex;
+		status.speed = speed;
+		if (!link) {
+			netif_carrier_off(netdev);
+			 /* Let TX drain. FIXME check that it is drained. */
+			mdelay(50);
+		}
+		priv->set_link(priv, status);
+		if (link)
+			netif_carrier_on(netdev);
+	}
+}
+
+static void bgx_port_check_state(struct work_struct *work)
+{
+	struct bgx_port_priv	*priv;
+	struct port_status	status;
+
+	priv = container_of(work, struct bgx_port_priv, dwork.work);
+
+	status = priv->get_link(priv);
+
+	if (!status.link &&
+	    priv->mode != PORT_MODE_SGMII && priv->mode != PORT_MODE_RGMII)
+		bgx_port_init_xaui_link(priv);
+
+	if (priv->last_status.link != status.link) {
+		priv->last_status.link = status.link;
+		if (status.link)
+			netdev_info(priv->netdev, "Link is up - %d/%s\n",
+				    status.speed,
+				    status.duplex == DUPLEX_FULL ? "Full" : "Half");
+		else
+			netdev_info(priv->netdev, "Link is down\n");
+	}
+
+	mutex_lock(&priv->lock);
+	if (priv->work_queued)
+		queue_delayed_work(check_state_wq, &priv->dwork, HZ);
+	mutex_unlock(&priv->lock);
+}
+
+int bgx_port_enable(struct net_device *netdev)
+{
+	struct bgx_port_priv	*priv = bgx_port_netdev2priv(netdev);
+	u64			data;
+	struct port_status	status;
+	bool			dont_use_phy;
+
+	if (priv->mode == PORT_MODE_SGMII || priv->mode == PORT_MODE_RGMII) {
+		/* 1G */
+		data = oct_csr_read(BGX_GMP_GMI_TX_APPEND(priv->node, priv->bgx, priv->index));
+		data |= BIT(2) | BIT(1);
+		oct_csr_write(data, BGX_GMP_GMI_TX_APPEND(priv->node, priv->bgx, priv->index));
+
+		/* Packets are padded (without FCS) to MIN_SIZE + 1 in SGMII */
+		data = 60 - 1;
+		oct_csr_write(data, BGX_GMP_GMI_TX_MIN_PKT(priv->node, priv->bgx, priv->index));
+	} else {
+		/* 10G or higher */
+		data = oct_csr_read(BGX_SMU_TX_APPEND(priv->node, priv->bgx, priv->index));
+		data |= BIT(2) | BIT(1);
+		oct_csr_write(data, BGX_SMU_TX_APPEND(priv->node, priv->bgx, priv->index));
+
+		/* Packets are padded(with FCS) to MIN_SIZE  in non-SGMII */
+		data = 60 + 4;
+		oct_csr_write(data, BGX_SMU_TX_MIN_PKT(priv->node, priv->bgx, priv->index));
+	}
+
+	switch (priv->mode) {
+	case PORT_MODE_XLAUI:
+	case PORT_MODE_XFI:
+	case PORT_MODE_10G_KR:
+	case PORT_MODE_40G_KR4:
+		dont_use_phy = true;
+		break;
+	default:
+		dont_use_phy = false;
+		break;
+	}
+
+	if (!priv->phy_np || dont_use_phy) {
+		status = priv->get_link(priv);
+		priv->set_link(priv, status);
+		netif_carrier_on(netdev);
+
+		mutex_lock(&check_state_wq_mutex);
+		if (!check_state_wq) {
+			check_state_wq =
+				alloc_workqueue("check_state_wq", WQ_UNBOUND | WQ_MEM_RECLAIM, 1);
+		}
+		mutex_unlock(&check_state_wq_mutex);
+		if (!check_state_wq)
+			return -ENOMEM;
+
+		mutex_lock(&priv->lock);
+		INIT_DELAYED_WORK(&priv->dwork, bgx_port_check_state);
+		queue_delayed_work(check_state_wq, &priv->dwork, 0);
+		priv->work_queued = true;
+		mutex_unlock(&priv->lock);
+
+		netdev_info(priv->netdev, "Link is not ready\n");
+
+	} else {
+		priv->phydev = of_phy_connect(netdev, priv->phy_np,
+					      bgx_port_adjust_link, 0, PHY_INTERFACE_MODE_SGMII);
+		if (!priv->phydev)
+			return -ENODEV;
+
+		netif_carrier_off(netdev);
+
+		if (priv->phydev)
+			phy_start_aneg(priv->phydev);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(bgx_port_enable);
+
+int bgx_port_disable(struct net_device *netdev)
+{
+	struct bgx_port_priv	*priv = bgx_port_netdev2priv(netdev);
+	struct port_status	status;
+
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+	}
+	priv->phydev = NULL;
+
+	netif_carrier_off(netdev);
+	memset(&status, 0, sizeof(status));
+	priv->last_status.link = 0;
+	priv->set_link(priv, status);
+
+	mutex_lock(&priv->lock);
+	if (priv->work_queued) {
+		cancel_delayed_work_sync(&priv->dwork);
+		priv->work_queued = false;
+	}
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(bgx_port_disable);
+
+int bgx_port_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+	int max_frame;
+
+	if (new_mtu < 60 || new_mtu > 65392) {
+		netdev_warn(netdev, "Maximum MTU supported is 65392\n");
+		return -EINVAL;
+	}
+
+	netdev->mtu = new_mtu;
+
+	max_frame = round_up(new_mtu + ETH_HLEN + ETH_FCS_LEN, 8);
+
+	if (priv->mode == PORT_MODE_SGMII || priv->mode == PORT_MODE_RGMII) {
+		/* 1G */
+		oct_csr_write(max_frame, BGX_GMP_GMI_RX_JABBER(priv->node, priv->bgx, priv->index));
+	} else {
+		/* 10G or higher */
+		oct_csr_write(max_frame, BGX_SMU_RX_JABBER(priv->node, priv->bgx, priv->index));
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(bgx_port_change_mtu);
+
+void bgx_port_mix_assert_reset(struct net_device *netdev, int mix, bool v)
+{
+	struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+	u64 mask = 1ull << (3 + (mix & 1));
+	u64 data;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && v) {
+		/* Need to disable the mix before resetting the bgx-mix
+		 * interface as not doing so confuses the other already up
+		 * lmacs.
+		 */
+		data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+		data &= ~BIT(11);
+		oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	}
+
+	data = oct_csr_read(BGX_CMR_GLOBAL_CONFIG(priv->node, priv->bgx));
+	if (v)
+		data |= mask;
+	else
+		data &= ~mask;
+	oct_csr_write(data, BGX_CMR_GLOBAL_CONFIG(priv->node, priv->bgx));
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && !v) {
+		data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+		data |= BIT(11);
+		oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+	}
+}
+EXPORT_SYMBOL(bgx_port_mix_assert_reset);
+
+static int bgx_port_probe(struct platform_device *pdev)
+{
+	u64 addr;
+	const u8 *mac;
+	const __be32 *reg;
+	u32 index;
+	int rc;
+	struct bgx_port_priv *priv;
+	int numa_node;
+
+	reg = of_get_property(pdev->dev.parent->of_node, "reg", NULL);
+	addr = of_translate_address(pdev->dev.parent->of_node, reg);
+	mac = of_get_mac_address(pdev->dev.of_node);
+
+	numa_node = (addr >> 36) & 0x7;
+
+	rc = of_property_read_u32(pdev->dev.of_node, "reg", &index);
+	if (rc)
+		return -ENODEV;
+	priv = kzalloc_node(sizeof(*priv), GFP_KERNEL, numa_node);
+	if (!priv)
+		return -ENOMEM;
+	priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+	if (of_get_property(pdev->dev.of_node, "cavium,sgmii-mac-1000x-mode",
+			    NULL))
+		priv->mode_1000basex = true;
+	if (of_get_property(pdev->dev.of_node, "cavium,sgmii-mac-phy-mode",
+			    NULL))
+		priv->bgx_as_phy = true;
+
+	mutex_init(&priv->lock);
+	priv->node = numa_node;
+	priv->bgx = (addr >> 24) & 0xf;
+	priv->index = index;
+	if (mac)
+		priv->mac_addr = mac;
+
+	priv->qlm = bgx_port_get_qlm(priv->node, priv->bgx, priv->index);
+	priv->mode = bgx_port_get_mode(priv->node, priv->bgx, priv->index);
+
+	switch (priv->mode) {
+	case PORT_MODE_SGMII:
+	case PORT_MODE_RGMII:
+		priv->get_link = bgx_port_get_sgmii_link;
+		priv->set_link = bgx_port_set_xgmii_link;
+		break;
+	case PORT_MODE_XAUI:
+	case PORT_MODE_RXAUI:
+	case PORT_MODE_XLAUI:
+	case PORT_MODE_XFI:
+	case PORT_MODE_10G_KR:
+	case PORT_MODE_40G_KR4:
+		priv->get_link = bgx_port_get_xaui_link;
+		priv->set_link = bgx_port_set_xaui_link;
+		break;
+	default:
+		goto err;
+	}
+
+	dev_set_drvdata(&pdev->dev, priv);
+
+	bgx_port_init(priv);
+
+	dev_info(&pdev->dev, "Probed\n");
+	return 0;
+ err:
+	kfree(priv);
+	return rc;
+}
+
+static int bgx_port_remove(struct platform_device *pdev)
+{
+	struct bgx_port_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	kfree(priv);
+	return 0;
+}
+
+static void bgx_port_shutdown(struct platform_device *pdev)
+{
+}
+
+static const struct of_device_id bgx_port_match[] = {
+	{
+		.compatible = "cavium,octeon-7890-bgx-port",
+	},
+	{
+		.compatible = "cavium,octeon-7360-xcv",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bgx_port_match);
+
+static struct platform_driver bgx_port_driver = {
+	.probe		= bgx_port_probe,
+	.remove		= bgx_port_remove,
+	.shutdown       = bgx_port_shutdown,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= KBUILD_MODNAME,
+		.of_match_table = bgx_port_match,
+	},
+};
+
+static int __init bgx_port_driver_init(void)
+{
+	int r;
+	int i;
+	int j;
+	int k;
+
+	for (i = 0; i < MAX_NODES; i++) {
+		for (j = 0; j < MAX_BGX_PER_NODE; j++) {
+			for (k = 0; k < MAX_LMAC_PER_BGX; k++)
+				lmac_pknd[i][j][k] = -1;
+		}
+	}
+
+	bgx_nexus_load();
+	r =  platform_driver_register(&bgx_port_driver);
+	return r;
+}
+module_init(bgx_port_driver_init);
+
+static void __exit bgx_port_driver_exit(void)
+{
+	platform_driver_unregister(&bgx_port_driver);
+	if (check_state_wq)
+		destroy_workqueue(check_state_wq);
+}
+module_exit(bgx_port_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium, Inc. BGX Ethernet MAC driver.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-core.c b/drivers/net/ethernet/cavium/octeon/octeon3-core.c
new file mode 100644
index 000000000000..a07b32bc5808
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-core.c
@@ -0,0 +1,2075 @@ 
+/*
+ * Copyright (c) 2017 Cavium, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/rculist.h>
+#include <linux/atomic.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/if_vlan.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/net_tstamp.h>
+#include <linux/timecounter.h>
+#include <linux/ptp_clock_kernel.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+/*  First buffer:
+ *
+ *                            +---SKB---------+
+ *                            |               |
+ *                            |               |
+ *                         +--+--*data        |
+ *                         |  |               |
+ *                         |  |               |
+ *                         |  +---------------+
+ *                         |       /|\
+ *                         |        |
+ *                         |        |
+ *                        \|/       |
+ * WQE - 128 -+-----> +-------------+-------+     -+-
+ *            |       |    *skb ----+       |      |
+ *            |       |                     |      |
+ *            |       |                     |      |
+ *  WQE_SKIP = 128    |                     |      |
+ *            |       |                     |      |
+ *            |       |                     |      |
+ *            |       |                     |      |
+ *            |       |                     |      First Skip
+ * WQE   -----+-----> +---------------------+      |
+ *                    |   word 0            |      |
+ *                    |   word 1            |      |
+ *                    |   word 2            |      |
+ *                    |   word 3            |      |
+ *                    |   word 4            |      |
+ *                    +---------------------+     -+-
+ *               +----+- packet link        |
+ *               |    |  packet data        |
+ *               |    |                     |
+ *               |    |                     |
+ *               |    |         .           |
+ *               |    |         .           |
+ *               |    |         .           |
+ *               |    +---------------------+
+ *               |
+ *               |
+ * Later buffers:|
+ *               |
+ *               |
+ *               |
+ *               |
+ *               |
+ *               |            +---SKB---------+
+ *               |            |               |
+ *               |            |               |
+ *               |         +--+--*data        |
+ *               |         |  |               |
+ *               |         |  |               |
+ *               |         |  +---------------+
+ *               |         |       /|\
+ *               |         |        |
+ *               |         |        |
+ *               |        \|/       |
+ * WQE - 128 ----+--> +-------------+-------+     -+-
+ *               |    |    *skb ----+       |      |
+ *               |    |                     |      |
+ *               |    |                     |      |
+ *               |    |                     |      |
+ *               |    |                     |      LATER_SKIP = 128
+ *               |    |                     |      |
+ *               |    |                     |      |
+ *               |    |                     |      |
+ *               |    +---------------------+     -+-
+ *               |    |  packet link        |
+ *               +--> |  packet data        |
+ *                    |                     |
+ *                    |                     |
+ *                    |         .           |
+ *                    |         .           |
+ *                    |         .           |
+ *                    +---------------------+
+ */
+
+#define MAX_TX_QUEUE_DEPTH 512
+#define SSO_INTSN_EXE 0x61
+#define MAX_RX_QUEUES 32
+
+#define SKB_PTR_OFFSET		0
+
+#define MAX_CORES		48
+#define FPA3_NUM_AURAS		1024
+
+#define USE_ASYNC_IOBDMA	1
+#define SCR_SCRATCH		0ull
+#define SSO_NO_WAIT		0ull
+#define DID_TAG_SWTAG		0x60ull
+#define IOBDMA_SENDSINGLE	0xffffffffffffa200ull
+
+/* Values for the value of wqe word2 [ERRLEV] */
+#define PKI_ERRLEV_LA		0x01
+
+/* Values for the value of wqe word2 [OPCODE] */
+#define PKI_OPCODE_NONE		0x00
+#define PKI_OPCODE_JABBER	0x02
+#define PKI_OPCODE_FCS		0x07
+
+/* Values for the layer type in the wqe */
+#define PKI_LTYPE_IP4		0x08
+#define PKI_LTYPE_IP6		0x0a
+#define PKI_LTYPE_TCP		0x10
+#define PKI_LTYPE_UDP		0x11
+#define PKI_LTYPE_SCTP		0x12
+
+/* Registers are accessed via xkphys */
+#define SSO_BASE			0x1670000000000ull
+#define SSO_ADDR(node)			(SET_XKPHYS + NODE_OFFSET(node) +      \
+					 SSO_BASE)
+#define GRP_OFFSET(grp)			((grp) << 16)
+#define GRP_ADDR(n, g)			(SSO_ADDR(n) + GRP_OFFSET(g))
+#define SSO_GRP_AQ_CNT(n, g)		(GRP_ADDR(n, g)		   + 0x20000700)
+
+#define MIO_PTP_BASE			0x1070000000000ull
+#define MIO_PTP_ADDR(node)		(SET_XKPHYS + NODE_OFFSET(node) +      \
+					 MIO_PTP_BASE)
+#define MIO_PTP_CLOCK_CFG(node)		(MIO_PTP_ADDR(node)		+ 0xf00)
+#define MIO_PTP_CLOCK_HI(node)		(MIO_PTP_ADDR(node)		+ 0xf10)
+#define MIO_PTP_CLOCK_COMP(node)	(MIO_PTP_ADDR(node)		+ 0xf18)
+
+struct octeon3_ethernet;
+
+struct octeon3_rx {
+	struct napi_struct	napi;
+	struct octeon3_ethernet *parent;
+	int rx_grp;
+	int rx_irq;
+	cpumask_t rx_affinity_hint;
+} ____cacheline_aligned_in_smp;
+
+struct octeon3_ethernet {
+	struct bgx_port_netdev_priv bgx_priv; /* Must be first element. */
+	struct list_head list;
+	struct net_device *netdev;
+	enum octeon3_mac_type mac_type;
+	struct octeon3_rx rx_cxt[MAX_RX_QUEUES];
+	struct ptp_clock_info ptp_info;
+	struct ptp_clock *ptp_clock;
+	struct cyclecounter cc;
+	struct timecounter tc;
+	spinlock_t ptp_lock;		/* Serialize ptp clock adjustments */
+	int num_rx_cxt;
+	int pki_aura;
+	int pknd;
+	int pko_queue;
+	int node;
+	int interface;
+	int index;
+	int rx_buf_count;
+	int tx_complete_grp;
+	int rx_timestamp_hw:1;
+	int tx_timestamp_hw:1;
+	spinlock_t stat_lock;		/* Protects stats counters */
+	u64 last_packets;
+	u64 last_octets;
+	u64 last_dropped;
+	atomic64_t rx_packets;
+	atomic64_t rx_octets;
+	atomic64_t rx_dropped;
+	atomic64_t rx_errors;
+	atomic64_t rx_length_errors;
+	atomic64_t rx_crc_errors;
+	atomic64_t tx_packets;
+	atomic64_t tx_octets;
+	atomic64_t tx_dropped;
+	/* The following two fields need to be on a different cache line as
+	 * they are updated by pko which invalidates the cache every time it
+	 * updates them. The idea is to prevent other fields from being
+	 * invalidated unnecessarily.
+	 */
+	char cacheline_pad1[CVMX_CACHE_LINE_SIZE];
+	atomic64_t buffers_needed;
+	atomic64_t tx_backlog;
+	char cacheline_pad2[CVMX_CACHE_LINE_SIZE];
+};
+
+static DEFINE_MUTEX(octeon3_eth_init_mutex);
+
+struct octeon3_ethernet_node;
+
+struct octeon3_ethernet_worker {
+	wait_queue_head_t queue;
+	struct task_struct *task;
+	struct octeon3_ethernet_node *oen;
+	atomic_t kick;
+	int order;
+};
+
+struct octeon3_ethernet_node {
+	bool init_done;
+	int next_cpu_irq_affinity;
+	int node;
+	int pki_packet_pool;
+	int sso_pool;
+	int pko_pool;
+	void *sso_pool_stack;
+	void *pko_pool_stack;
+	void *pki_packet_pool_stack;
+	int sso_aura;
+	int pko_aura;
+	int tx_complete_grp;
+	int tx_irq;
+	cpumask_t tx_affinity_hint;
+	struct octeon3_ethernet_worker workers[8];
+	struct mutex device_list_lock;	/* Protects the device list */
+	struct list_head device_list;
+	spinlock_t napi_alloc_lock;	/* Protects napi allocations */
+};
+
+static int wait_pko_response;
+module_param(wait_pko_response, int, 0644);
+MODULE_PARM_DESC(wait_pko_response, "Wait for response after each pko command.");
+
+static int num_packet_buffers = 768;
+module_param(num_packet_buffers, int, 0444);
+MODULE_PARM_DESC(num_packet_buffers,
+		 "Number of packet buffers to allocate per port.");
+
+static int packet_buffer_size = 2048;
+module_param(packet_buffer_size, int, 0444);
+MODULE_PARM_DESC(packet_buffer_size, "Size of each RX packet buffer.");
+
+static int rx_queues = 1;
+module_param(rx_queues, int, 0444);
+MODULE_PARM_DESC(rx_queues, "Number of RX threads per port.");
+
+int ilk0_lanes = 1;
+module_param(ilk0_lanes, int, 0444);
+MODULE_PARM_DESC(ilk0_lanes, "Number of SerDes lanes used by ILK link 0.");
+
+int ilk1_lanes = 1;
+module_param(ilk1_lanes, int, 0444);
+MODULE_PARM_DESC(ilk1_lanes, "Number of SerDes lanes used by ILK link 1.");
+
+static struct octeon3_ethernet_node octeon3_eth_node[MAX_NODES];
+static struct kmem_cache *octeon3_eth_sso_pko_cache;
+
+/**
+ * Reads a 64 bit value from the processor local scratchpad memory.
+ *
+ * @param offset byte offset into scratch pad to read
+ *
+ * @return value read
+ */
+static inline u64 scratch_read64(u64 offset)
+{
+	return *(u64 *)((long)SCRATCH_BASE + offset);
+}
+
+/**
+ * Write a 64 bit value to the processor local scratchpad memory.
+ *
+ * @param offset byte offset into scratch pad to write
+ @ @praram value to write
+ */
+static inline void scratch_write64(u64 offset, u64 value)
+{
+	*(u64 *)((long)SCRATCH_BASE + offset) = value;
+}
+
+static int get_pki_chan(int node, int interface, int index)
+{
+	int	pki_chan;
+
+	pki_chan = node << 12;
+
+	if (OCTEON_IS_MODEL(OCTEON_CNF75XX) &&
+	    (interface == 1 || interface == 2)) {
+		/* SRIO */
+		pki_chan |= 0x240 + (2 * (interface - 1)) + index;
+	} else {
+		/* BGX */
+		pki_chan |= 0x800 + (0x100 * interface) + (0x10 * index);
+	}
+
+	return pki_chan;
+}
+
+/* Map auras to the field priv->buffers_needed. Used to speed up packet
+ * transmission.
+ */
+static void *aura2bufs_needed[MAX_NODES][FPA3_NUM_AURAS];
+
+static int octeon3_eth_lgrp_to_ggrp(int node, int grp)
+{
+	return (node << 8) | grp;
+}
+
+static void octeon3_eth_gen_affinity(int node, cpumask_t *mask)
+{
+	int cpu;
+
+	do {
+		cpu = cpumask_next(octeon3_eth_node[node].next_cpu_irq_affinity, cpu_online_mask);
+		octeon3_eth_node[node].next_cpu_irq_affinity++;
+		if (cpu >= nr_cpu_ids) {
+			octeon3_eth_node[node].next_cpu_irq_affinity = -1;
+			continue;
+		}
+	} while (false);
+	cpumask_clear(mask);
+	cpumask_set_cpu(cpu, mask);
+}
+
+struct wr_ret {
+	void *work;
+	u16 grp;
+};
+
+static inline struct wr_ret octeon3_core_get_work_sync(int grp)
+{
+	u64		node = cvmx_get_node_num();
+	u64		addr;
+	u64		response;
+	struct wr_ret	r;
+
+	/* See SSO_GET_WORK_LD_S for the address to read */
+	addr = 1ull << 63;
+	addr |= BIT(48);
+	addr |= DID_TAG_SWTAG << 40;
+	addr |= node << 36;
+	addr |= BIT(30);
+	addr |= BIT(29);
+	addr |= octeon3_eth_lgrp_to_ggrp(node, grp) << 4;
+	addr |= SSO_NO_WAIT << 3;
+	response = __raw_readq((void __iomem *)addr);
+
+	/* See SSO_GET_WORK_RTN_S for the format of the response */
+	r.grp = (response & GENMASK_ULL(57, 48)) >> 48;
+	if (response & BIT(63))
+		r.work = NULL;
+	else
+		r.work = phys_to_virt(response & GENMASK_ULL(41, 0));
+
+	return r;
+}
+
+/**
+ * octeon3_core_get_work_async - Request work via a iobdma command. Doesn't wait
+ *				 for the response.
+ *
+ * @grp: Group to request work for.
+ */
+static inline void octeon3_core_get_work_async(unsigned int grp)
+{
+	u64	data;
+	u64	node = cvmx_get_node_num();
+
+	/* See SSO_GET_WORK_DMA_S for the command structure */
+	data = SCR_SCRATCH << 56;
+	data |= 1ull << 48;
+	data |= DID_TAG_SWTAG << 40;
+	data |= node << 36;
+	data |= 1ull << 30;
+	data |= 1ull << 29;
+	data |= octeon3_eth_lgrp_to_ggrp(node, grp) << 4;
+	data |= SSO_NO_WAIT << 3;
+
+	__raw_writeq(data, (void __iomem *)IOBDMA_SENDSINGLE);
+}
+
+/**
+ * octeon3_core_get_response_async - Read the request work response. Must be
+ *				     called after calling
+ *				     octeon3_core_get_work_async().
+ *
+ * Returns work queue entry.
+ */
+static inline struct wr_ret octeon3_core_get_response_async(void)
+{
+	struct wr_ret	r;
+	u64		response;
+
+	CVMX_SYNCIOBDMA;
+	response = scratch_read64(SCR_SCRATCH);
+
+	/* See SSO_GET_WORK_RTN_S for the format of the response */
+	r.grp = (response & GENMASK_ULL(57, 48)) >> 48;
+	if (response & BIT(63))
+		r.work = NULL;
+	else
+		r.work = phys_to_virt(response & GENMASK_ULL(41, 0));
+
+	return r;
+}
+
+static void octeon3_eth_replenish_rx(struct octeon3_ethernet *priv, int count)
+{
+	struct sk_buff *skb;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		void **buf;
+
+		skb = __alloc_skb(packet_buffer_size, GFP_ATOMIC, 0, priv->node);
+		if (!skb)
+			break;
+		buf = (void **)PTR_ALIGN(skb->head, 128);
+		buf[SKB_PTR_OFFSET] = skb;
+		octeon_fpa3_free(priv->node, priv->pki_aura, buf);
+	}
+}
+
+static bool octeon3_eth_tx_complete_runnable(struct octeon3_ethernet_worker *worker)
+{
+	return atomic_read(&worker->kick) != 0 || kthread_should_stop();
+}
+
+static int octeon3_eth_replenish_all(struct octeon3_ethernet_node *oen)
+{
+	int pending = 0;
+	int batch_size = 32;
+	struct octeon3_ethernet *priv;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(priv, &oen->device_list, list) {
+		int amount = atomic64_sub_if_positive(batch_size, &priv->buffers_needed);
+
+		if (amount >= 0) {
+			octeon3_eth_replenish_rx(priv, batch_size);
+			pending += amount;
+		}
+	}
+	rcu_read_unlock();
+	return pending;
+}
+
+static int octeon3_eth_tx_complete_hwtstamp(struct octeon3_ethernet *priv,
+					    struct sk_buff *skb)
+{
+	struct skb_shared_hwtstamps	shts;
+	u64				hwts;
+	u64				ns;
+
+	hwts = *((u64 *)(skb->cb) + 1);
+	ns = timecounter_cyc2time(&priv->tc, hwts);
+	memset(&shts, 0, sizeof(shts));
+	shts.hwtstamp = ns_to_ktime(ns);
+	skb_tstamp_tx(skb, &shts);
+
+	return 0;
+}
+
+static int octeon3_eth_tx_complete_worker(void *data)
+{
+	struct octeon3_ethernet_worker *worker = data;
+	struct octeon3_ethernet_node *oen = worker->oen;
+	int backlog;
+	int order = worker->order;
+	int tx_complete_stop_thresh = order * 100;
+	int backlog_stop_thresh = order == 0 ? 31 : order * 80;
+	u64 aq_cnt;
+	int i;
+
+	while (!kthread_should_stop()) {
+		wait_event_interruptible(worker->queue, octeon3_eth_tx_complete_runnable(worker));
+		atomic_dec_if_positive(&worker->kick); /* clear the flag */
+
+		do {
+			backlog = octeon3_eth_replenish_all(oen);
+			for (i = 0; i < 100; i++) {
+				void **work;
+				struct net_device *tx_netdev;
+				struct octeon3_ethernet *tx_priv;
+				struct sk_buff *skb;
+				struct wr_ret r;
+
+				r = octeon3_core_get_work_sync(oen->tx_complete_grp);
+				work = r.work;
+				if (!work)
+					break;
+				tx_netdev = work[0];
+				tx_priv = netdev_priv(tx_netdev);
+				if (unlikely(netif_queue_stopped(tx_netdev)) &&
+				    atomic64_read(&tx_priv->tx_backlog) < MAX_TX_QUEUE_DEPTH)
+					netif_wake_queue(tx_netdev);
+				skb = container_of((void *)work, struct sk_buff, cb);
+				if (unlikely(tx_priv->tx_timestamp_hw) &&
+				    unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
+					octeon3_eth_tx_complete_hwtstamp(tx_priv, skb);
+				dev_kfree_skb(skb);
+			}
+
+			aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(oen->node, oen->tx_complete_grp));
+			aq_cnt &= GENMASK_ULL(32, 0);
+			if ((backlog > backlog_stop_thresh || aq_cnt > tx_complete_stop_thresh) &&
+			    order < ARRAY_SIZE(oen->workers) - 1) {
+				atomic_set(&oen->workers[order + 1].kick, 1);
+				wake_up(&oen->workers[order + 1].queue);
+			}
+		} while (!need_resched() &&
+			 (backlog > backlog_stop_thresh ||
+			  aq_cnt > tx_complete_stop_thresh));
+
+		cond_resched();
+
+		if (!octeon3_eth_tx_complete_runnable(worker))
+			octeon3_sso_irq_set(oen->node, oen->tx_complete_grp, true);
+	}
+
+	return 0;
+}
+
+static irqreturn_t octeon3_eth_tx_handler(int irq, void *info)
+{
+	struct octeon3_ethernet_node *oen = info;
+	/* Disarm the irq. */
+	octeon3_sso_irq_set(oen->node, oen->tx_complete_grp, false);
+	atomic_set(&oen->workers[0].kick, 1);
+	wake_up(&oen->workers[0].queue);
+	return IRQ_HANDLED;
+}
+
+static int octeon3_eth_global_init(unsigned int node,
+				   struct platform_device *pdev)
+{
+	int i;
+	int rv = 0;
+	unsigned int sso_intsn;
+	struct octeon3_ethernet_node *oen;
+
+	mutex_lock(&octeon3_eth_init_mutex);
+
+	oen = octeon3_eth_node + node;
+
+	if (oen->init_done)
+		goto done;
+
+	/* CN78XX-P1.0 cannot un-initialize PKO, so get a module
+	 * reference to prevent it from being unloaded.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_0))
+		if (!try_module_get(THIS_MODULE))
+			dev_err(&pdev->dev,
+				"ERROR: Could not obtain module reference for CN78XX-P1.0\n");
+
+	INIT_LIST_HEAD(&oen->device_list);
+	mutex_init(&oen->device_list_lock);
+	spin_lock_init(&oen->napi_alloc_lock);
+
+	oen->node = node;
+
+	octeon_fpa3_init(node);
+	rv = octeon_fpa3_pool_init(node, -1, &oen->sso_pool,
+				   &oen->sso_pool_stack, 40960);
+	if (rv)
+		goto done;
+
+	rv = octeon_fpa3_pool_init(node, -1, &oen->pko_pool,
+				   &oen->pko_pool_stack, 40960);
+	if (rv)
+		goto done;
+
+	rv = octeon_fpa3_pool_init(node, -1, &oen->pki_packet_pool,
+				   &oen->pki_packet_pool_stack, 64 * num_packet_buffers);
+	if (rv)
+		goto done;
+
+	rv = octeon_fpa3_aura_init(node, oen->sso_pool, -1,
+				   &oen->sso_aura, num_packet_buffers, 20480);
+	if (rv)
+		goto done;
+
+	rv = octeon_fpa3_aura_init(node, oen->pko_pool, -1,
+				   &oen->pko_aura, num_packet_buffers, 20480);
+	if (rv)
+		goto done;
+
+	dev_info(&pdev->dev, "SSO:%d:%d, PKO:%d:%d\n", oen->sso_pool,
+		 oen->sso_aura, oen->pko_pool, oen->pko_aura);
+
+	if (!octeon3_eth_sso_pko_cache) {
+		octeon3_eth_sso_pko_cache = kmem_cache_create("sso_pko", 4096, 128, 0, NULL);
+		if (!octeon3_eth_sso_pko_cache) {
+			rv = -ENOMEM;
+			goto done;
+		}
+	}
+
+	rv = octeon_fpa3_mem_fill(node, octeon3_eth_sso_pko_cache,
+				  oen->sso_aura, 1024);
+	if (rv)
+		goto done;
+
+	rv = octeon_fpa3_mem_fill(node, octeon3_eth_sso_pko_cache,
+				  oen->pko_aura, 1024);
+	if (rv)
+		goto done;
+
+	rv = octeon3_sso_init(node, oen->sso_aura);
+	if (rv)
+		goto done;
+
+	oen->tx_complete_grp = octeon3_sso_alloc_grp(node, -1);
+	if (oen->tx_complete_grp < 0)
+		goto done;
+
+	sso_intsn = SSO_INTSN_EXE << 12 | oen->tx_complete_grp;
+	oen->tx_irq = irq_create_mapping(NULL, sso_intsn);
+	if (!oen->tx_irq) {
+		rv = -ENODEV;
+		goto done;
+	}
+
+	rv = octeon3_pko_init_global(node, oen->pko_aura);
+	if (rv) {
+		rv = -ENODEV;
+		goto done;
+	}
+
+	octeon3_pki_vlan_init(node);
+	octeon3_pki_cluster_init(node, pdev);
+	octeon3_pki_ltype_init(node);
+	octeon3_pki_enable(node);
+
+	for (i = 0; i < ARRAY_SIZE(oen->workers); i++) {
+		oen->workers[i].oen = oen;
+		init_waitqueue_head(&oen->workers[i].queue);
+		oen->workers[i].order = i;
+	}
+	for (i = 0; i < ARRAY_SIZE(oen->workers); i++) {
+		oen->workers[i].task = kthread_create_on_node(octeon3_eth_tx_complete_worker,
+							      oen->workers + i, node,
+							      "oct3_eth/%d:%d", node, i);
+		if (IS_ERR(oen->workers[i].task)) {
+			rv = PTR_ERR(oen->workers[i].task);
+			goto done;
+		} else {
+#ifdef CONFIG_NUMA
+			set_cpus_allowed_ptr(oen->workers[i].task, cpumask_of_node(node));
+#endif
+			wake_up_process(oen->workers[i].task);
+		}
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+		octeon3_sso_pass1_limit(node, oen->tx_complete_grp);
+
+	rv = request_irq(oen->tx_irq, octeon3_eth_tx_handler,
+			 IRQ_TYPE_EDGE_RISING, "oct3_eth_tx_done", oen);
+	if (rv)
+		goto done;
+	octeon3_eth_gen_affinity(node, &oen->tx_affinity_hint);
+	irq_set_affinity_hint(oen->tx_irq, &oen->tx_affinity_hint);
+
+	octeon3_sso_irq_set(node, oen->tx_complete_grp, true);
+
+	oen->init_done = true;
+done:
+	mutex_unlock(&octeon3_eth_init_mutex);
+	return rv;
+}
+
+static struct sk_buff *octeon3_eth_work_to_skb(void *w)
+{
+	struct sk_buff *skb;
+	void **f = w;
+
+	skb = f[-16];
+	return skb;
+}
+
+/* Receive one packet.
+ * returns the number of RX buffers consumed.
+ */
+static int octeon3_eth_rx_one(struct octeon3_rx *rx, bool is_async, bool req_next)
+{
+	int segments;
+	int ret;
+	unsigned int packet_len;
+	struct wqe *work;
+	u8 *data;
+	int len_remaining;
+	struct sk_buff *skb;
+	union buf_ptr packet_ptr;
+	struct wr_ret r;
+	struct octeon3_ethernet *priv = rx->parent;
+
+	if (is_async)
+		r = octeon3_core_get_response_async();
+	else
+		r = octeon3_core_get_work_sync(rx->rx_grp);
+	work = r.work;
+	if (!work)
+		return 0;
+
+	/* Request the next work so it'll be ready when we need it */
+	if (is_async && req_next)
+		octeon3_core_get_work_async(rx->rx_grp);
+
+	skb = octeon3_eth_work_to_skb(work);
+
+	segments = work->word0.bufs;
+	ret = segments;
+	packet_ptr = work->packet_ptr;
+	if (unlikely(work->word2.err_level <= PKI_ERRLEV_LA &&
+		     work->word2.err_code != PKI_OPCODE_NONE)) {
+		atomic64_inc(&priv->rx_errors);
+		switch (work->word2.err_code) {
+		case PKI_OPCODE_JABBER:
+			atomic64_inc(&priv->rx_length_errors);
+			break;
+		case PKI_OPCODE_FCS:
+			atomic64_inc(&priv->rx_crc_errors);
+			break;
+		}
+		data = phys_to_virt(packet_ptr.addr);
+		for (;;) {
+			dev_kfree_skb_any(skb);
+			segments--;
+			if (segments <= 0)
+				break;
+			packet_ptr.u64 = *(u64 *)(data - 8);
+#ifndef __LITTLE_ENDIAN
+			if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+				/* PKI_BUFLINK_S's are endian-swapped */
+				packet_ptr.u64 = swab64(packet_ptr.u64);
+			}
+#endif
+			data = phys_to_virt(packet_ptr.addr);
+			skb = octeon3_eth_work_to_skb((void *)round_down((unsigned long)data, 128ull));
+		}
+		goto out;
+	}
+
+	packet_len = work->word1.len;
+	data = phys_to_virt(packet_ptr.addr);
+	skb->data = data;
+	skb->len = packet_len;
+	len_remaining = packet_len;
+	if (segments == 1) {
+		/* Strip the ethernet fcs */
+		skb->len -= 4;
+		skb_set_tail_pointer(skb, skb->len);
+	} else {
+		bool first_frag = true;
+		struct sk_buff *current_skb = skb;
+		struct sk_buff *next_skb = NULL;
+		unsigned int segment_size;
+
+		skb_frag_list_init(skb);
+		for (;;) {
+			segment_size = (segments == 1) ? len_remaining : packet_ptr.size;
+			len_remaining -= segment_size;
+			if (!first_frag) {
+				current_skb->len = segment_size;
+				skb->data_len += segment_size;
+				skb->truesize += current_skb->truesize;
+			}
+			skb_set_tail_pointer(current_skb, segment_size);
+			segments--;
+			if (segments == 0)
+				break;
+			packet_ptr.u64 = *(u64 *)(data - 8);
+#ifndef __LITTLE_ENDIAN
+			if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+				/* PKI_BUFLINK_S's are endian-swapped */
+				packet_ptr.u64 = swab64(packet_ptr.u64);
+			}
+#endif
+			data = phys_to_virt(packet_ptr.addr);
+			next_skb = octeon3_eth_work_to_skb((void *)round_down((unsigned long)data, 128ull));
+			if (first_frag) {
+				next_skb->next = skb_shinfo(current_skb)->frag_list;
+				skb_shinfo(current_skb)->frag_list = next_skb;
+			} else {
+				current_skb->next = next_skb;
+				next_skb->next = NULL;
+			}
+			current_skb = next_skb;
+			first_frag = false;
+			current_skb->data = data;
+		}
+
+		/* Strip the ethernet fcs */
+		pskb_trim(skb, skb->len - 4);
+	}
+
+	if (likely(priv->netdev->flags & IFF_UP)) {
+		skb_checksum_none_assert(skb);
+		if (unlikely(priv->rx_timestamp_hw)) {
+			/* The first 8 bytes are the timestamp */
+			u64 hwts = *(u64 *)skb->data;
+			u64 ns;
+			struct skb_shared_hwtstamps *shts;
+
+			ns = timecounter_cyc2time(&priv->tc, hwts);
+			shts = skb_hwtstamps(skb);
+			memset(shts, 0, sizeof(*shts));
+			shts->hwtstamp = ns_to_ktime(ns);
+			__skb_pull(skb, 8);
+		}
+
+		skb->protocol = eth_type_trans(skb, priv->netdev);
+		skb->dev = priv->netdev;
+		if (priv->netdev->features & NETIF_F_RXCSUM) {
+			if ((work->word2.lc_hdr_type == PKI_LTYPE_IP4 ||
+			     work->word2.lc_hdr_type == PKI_LTYPE_IP6) &&
+			    (work->word2.lf_hdr_type == PKI_LTYPE_TCP ||
+			     work->word2.lf_hdr_type == PKI_LTYPE_UDP ||
+			     work->word2.lf_hdr_type == PKI_LTYPE_SCTP))
+				if (work->word2.err_code == 0)
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+		}
+
+		napi_gro_receive(&rx->napi, skb);
+	} else {
+		/* Drop any packet received for a device that isn't up */
+		atomic64_inc(&priv->rx_dropped);
+		dev_kfree_skb_any(skb);
+	}
+out:
+	return ret;
+}
+
+static int octeon3_eth_napi(struct napi_struct *napi, int budget)
+{
+	int rx_count = 0;
+	struct octeon3_rx *cxt;
+	struct octeon3_ethernet *priv;
+	u64 aq_cnt;
+	int n = 0;
+	int n_bufs = 0;
+	u64 old_scratch;
+
+	cxt = container_of(napi, struct octeon3_rx, napi);
+	priv = cxt->parent;
+
+	/* Get the amount of work pending */
+	aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(priv->node, cxt->rx_grp));
+	aq_cnt &= GENMASK_ULL(32, 0);
+
+	if (likely(USE_ASYNC_IOBDMA)) {
+		/* Save scratch in case userspace is using it */
+		CVMX_SYNCIOBDMA;
+		old_scratch = scratch_read64(SCR_SCRATCH);
+
+		octeon3_core_get_work_async(cxt->rx_grp);
+	}
+
+	while (rx_count < budget) {
+		n = 0;
+
+		if (likely(USE_ASYNC_IOBDMA)) {
+			bool req_next = rx_count < (budget - 1) ? true : false;
+
+			n = octeon3_eth_rx_one(cxt, true, req_next);
+		} else {
+			n = octeon3_eth_rx_one(cxt, false, false);
+		}
+
+		if (n == 0)
+			break;
+
+		n_bufs += n;
+		rx_count++;
+	}
+
+	/* Wake up worker threads */
+	n_bufs = atomic64_add_return(n_bufs, &priv->buffers_needed);
+	if (n_bufs >= 32) {
+		struct octeon3_ethernet_node *oen;
+
+		oen = octeon3_eth_node + priv->node;
+		atomic_set(&oen->workers[0].kick, 1);
+		wake_up(&oen->workers[0].queue);
+	}
+
+	/* Stop the thread when no work is pending */
+	if (rx_count < budget) {
+		napi_complete(napi);
+		octeon3_sso_irq_set(cxt->parent->node, cxt->rx_grp, true);
+	}
+
+	if (likely(USE_ASYNC_IOBDMA)) {
+		/* Restore the scratch area */
+		scratch_write64(SCR_SCRATCH, old_scratch);
+	}
+
+	return rx_count;
+}
+
+#undef BROKEN_SIMULATOR_CSUM
+
+static void ethtool_get_drvinfo(struct net_device *netdev,
+				struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, "octeon3-ethernet");
+	strcpy(info->version, "1.0");
+	strcpy(info->bus_info, "Builtin");
+}
+
+static int ethtool_get_ts_info(struct net_device *ndev,
+			       struct ethtool_ts_info *info)
+{
+	struct octeon3_ethernet *priv = netdev_priv(ndev);
+
+	info->so_timestamping =
+		SOF_TIMESTAMPING_TX_HARDWARE |
+		SOF_TIMESTAMPING_RX_HARDWARE |
+		SOF_TIMESTAMPING_RAW_HARDWARE;
+
+	if (priv->ptp_clock)
+		info->phc_index = ptp_clock_index(priv->ptp_clock);
+	else
+		info->phc_index = -1;
+
+	info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+
+	info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | (1 << HWTSTAMP_FILTER_ALL);
+
+	return 0;
+}
+
+static const struct ethtool_ops octeon3_ethtool_ops = {
+	.get_drvinfo = ethtool_get_drvinfo,
+	.get_link_ksettings = bgx_port_ethtool_get_link_ksettings,
+	.set_settings = bgx_port_ethtool_set_settings,
+	.nway_reset = bgx_port_ethtool_nway_reset,
+	.get_link = ethtool_op_get_link,
+	.get_ts_info = ethtool_get_ts_info,
+};
+
+static int octeon3_eth_ndo_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+		int fifo_size;
+		int max_mtu = 1500;
+		struct octeon3_ethernet *priv = netdev_priv(netdev);
+
+		/* On 78XX-Pass1 the mtu must be limited.  The PKO may
+		 * to lock up when calculating the L4 checksum for
+		 * large packets. How large the packets can be depends
+		 * on the amount of pko fifo assigned to the port.
+		 *
+		 *   FIFO size                Max frame size
+		 *	2.5 KB				1920
+		 *	5.0 KB				4480
+		 *     10.0 KB				9600
+		 *
+		 * The maximum mtu is set to the largest frame size minus the
+		 * l2 header.
+		 */
+		fifo_size = octeon3_pko_get_fifo_size(priv->node, priv->interface,
+						      priv->index, priv->mac_type);
+
+		switch (fifo_size) {
+		case 2560:
+			max_mtu = 1920 - ETH_HLEN - ETH_FCS_LEN - (2 * VLAN_HLEN);
+			break;
+
+		case 5120:
+			max_mtu = 4480 - ETH_HLEN - ETH_FCS_LEN - (2 * VLAN_HLEN);
+			break;
+
+		case 10240:
+			max_mtu = 9600 - ETH_HLEN - ETH_FCS_LEN - (2 * VLAN_HLEN);
+			break;
+
+		default:
+			break;
+		}
+		if (new_mtu > max_mtu) {
+			netdev_warn(netdev,
+				    "Maximum MTU supported is %d", max_mtu);
+			return -EINVAL;
+		}
+	}
+	return bgx_port_change_mtu(netdev, new_mtu);
+}
+
+static int octeon3_eth_common_ndo_init(struct net_device *netdev, int extra_skip)
+{
+	struct octeon3_ethernet *priv = netdev_priv(netdev);
+	struct octeon3_ethernet_node *oen = octeon3_eth_node + priv->node;
+	int pki_chan, dq;
+	int base_rx_grp[MAX_RX_QUEUES];
+	int r, i;
+	int aura;
+
+	netif_carrier_off(netdev);
+
+	netdev->features |=
+#ifndef BROKEN_SIMULATOR_CSUM
+		NETIF_F_IP_CSUM |
+		NETIF_F_IPV6_CSUM |
+#endif
+		NETIF_F_SG |
+		NETIF_F_FRAGLIST |
+		NETIF_F_RXCSUM |
+		NETIF_F_LLTX;
+
+	if (!OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+		netdev->features |= NETIF_F_SCTP_CRC;
+
+	netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+
+	/* Set user changeable settings */
+	netdev->hw_features = netdev->features;
+
+	priv->rx_buf_count = num_packet_buffers;
+
+	pki_chan = get_pki_chan(priv->node, priv->interface, priv->index);
+
+	dq = octeon3_pko_interface_init(priv->node, priv->interface,
+					priv->index, priv->mac_type, pki_chan);
+	if (dq < 0) {
+		dev_err(netdev->dev.parent, "Failed to initialize pko\n");
+		return -ENODEV;
+	}
+
+	r = octeon3_pko_activate_dq(priv->node, dq, 1);
+	if (r < 0) {
+		dev_err(netdev->dev.parent, "Failed to activate dq\n");
+		return -ENODEV;
+	}
+
+	priv->pko_queue = dq;
+	octeon_fpa3_aura_init(priv->node, oen->pki_packet_pool, -1, &aura,
+			      num_packet_buffers, num_packet_buffers * 2);
+	priv->pki_aura = aura;
+	aura2bufs_needed[priv->node][priv->pki_aura] = &priv->buffers_needed;
+
+	r = octeon3_sso_alloc_grp_range(priv->node, -1, rx_queues, false, base_rx_grp);
+	if (r) {
+		dev_err(netdev->dev.parent, "Failed to allocated SSO group\n");
+		return -ENODEV;
+	}
+	for (i = 0; i < rx_queues; i++) {
+		priv->rx_cxt[i].rx_grp = base_rx_grp[i];
+		priv->rx_cxt[i].parent = priv;
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+			octeon3_sso_pass1_limit(priv->node, priv->rx_cxt[i].rx_grp);
+	}
+	priv->num_rx_cxt = rx_queues;
+
+	priv->tx_complete_grp = oen->tx_complete_grp;
+	dev_info(netdev->dev.parent,
+		 "rx sso grp:%d..%d aura:%d pknd:%d pko_queue:%d\n",
+		 *base_rx_grp, *(base_rx_grp + priv->num_rx_cxt - 1),
+		 priv->pki_aura, priv->pknd, priv->pko_queue);
+
+	octeon3_pki_port_init(priv->node, priv->pki_aura, *base_rx_grp,
+			      extra_skip, (packet_buffer_size - 128),
+			      priv->pknd, priv->num_rx_cxt);
+
+	priv->last_packets = 0;
+	priv->last_octets = 0;
+	priv->last_dropped = 0;
+
+	/* Register ethtool methods */
+	netdev->ethtool_ops = &octeon3_ethtool_ops;
+
+	return 0;
+}
+
+static int octeon3_eth_bgx_ndo_init(struct net_device *netdev)
+{
+	struct octeon3_ethernet	*priv = netdev_priv(netdev);
+	const u8		*mac;
+	int			r;
+
+	priv->pknd = bgx_port_get_pknd(priv->node, priv->interface, priv->index);
+	octeon3_eth_common_ndo_init(netdev, 0);
+
+	/* Padding and FCS are done in BGX */
+	r = octeon3_pko_set_mac_options(priv->node, priv->interface, priv->index,
+					priv->mac_type, false, false, 0);
+	if (r)
+		return r;
+
+	mac = bgx_port_get_mac(netdev);
+	if (mac && is_valid_ether_addr(mac)) {
+		memcpy(netdev->dev_addr, mac, ETH_ALEN);
+		netdev->addr_assign_type &= ~NET_ADDR_RANDOM;
+	} else {
+		eth_hw_addr_random(netdev);
+	}
+
+	bgx_port_set_rx_filtering(netdev);
+	octeon3_eth_ndo_change_mtu(netdev, netdev->mtu);
+
+	return 0;
+}
+
+static void octeon3_eth_ndo_uninit(struct net_device *netdev)
+{
+	struct octeon3_ethernet	*priv = netdev_priv(netdev);
+	int			grp[MAX_RX_QUEUES];
+	int			i;
+
+	/* Shutdwon pki for this interface */
+	octeon3_pki_port_shutdown(priv->node, priv->pknd);
+	octeon_fpa3_release_aura(priv->node, priv->pki_aura);
+	aura2bufs_needed[priv->node][priv->pki_aura] = NULL;
+
+	/* Shutdown pko for this interface */
+	octeon3_pko_interface_uninit(priv->node, &priv->pko_queue, 1);
+
+	/* Free the receive contexts sso groups */
+	for (i = 0; i < rx_queues; i++)
+		grp[i] = priv->rx_cxt[i].rx_grp;
+	octeon3_sso_free_grp_range(priv->node, grp, rx_queues);
+}
+
+static irqreturn_t octeon3_eth_rx_handler(int irq, void *info)
+{
+	struct octeon3_rx *rx = info;
+
+	/* Disarm the irq. */
+	octeon3_sso_irq_set(rx->parent->node, rx->rx_grp, false);
+
+	napi_schedule(&rx->napi);
+	return IRQ_HANDLED;
+}
+
+static int octeon3_eth_common_ndo_open(struct net_device *netdev)
+{
+	struct octeon3_ethernet *priv = netdev_priv(netdev);
+	struct octeon3_rx *rx;
+	int i;
+	int r;
+
+	for (i = 0; i < priv->num_rx_cxt; i++) {
+		unsigned int	sso_intsn;
+
+		rx = priv->rx_cxt + i;
+		sso_intsn = SSO_INTSN_EXE << 12 | rx->rx_grp;
+
+		rx->rx_irq = irq_create_mapping(NULL, sso_intsn);
+		if (!rx->rx_irq) {
+			netdev_err(netdev,
+				   "ERROR: Couldn't map hwirq: %x\n", sso_intsn);
+			r = -EINVAL;
+			goto err1;
+		}
+		r = request_irq(rx->rx_irq, octeon3_eth_rx_handler,
+				IRQ_TYPE_EDGE_RISING, netdev_name(netdev), rx);
+		if (r) {
+			netdev_err(netdev, "ERROR: Couldn't request irq: %d\n",
+				   rx->rx_irq);
+			r = -ENOMEM;
+			goto err2;
+		}
+
+		octeon3_eth_gen_affinity(priv->node, &rx->rx_affinity_hint);
+		irq_set_affinity_hint(rx->rx_irq, &rx->rx_affinity_hint);
+
+		netif_napi_add(priv->netdev, &rx->napi,
+			       octeon3_eth_napi, NAPI_POLL_WEIGHT);
+		napi_enable(&rx->napi);
+
+		/* Arm the irq. */
+		octeon3_sso_irq_set(priv->node, rx->rx_grp, true);
+	}
+	octeon3_eth_replenish_rx(priv, priv->rx_buf_count);
+
+	return 0;
+
+err2:
+	irq_dispose_mapping(rx->rx_irq);
+err1:
+	for (i--; i >= 0; i--) {
+		rx = priv->rx_cxt + i;
+		free_irq(rx->rx_irq, rx);
+		irq_dispose_mapping(rx->rx_irq);
+		napi_disable(&rx->napi);
+		netif_napi_del(&rx->napi);
+	}
+
+	return r;
+}
+
+static int octeon3_eth_bgx_ndo_open(struct net_device *netdev)
+{
+	int	rc;
+
+	rc = octeon3_eth_common_ndo_open(netdev);
+	if (rc == 0)
+		rc = bgx_port_enable(netdev);
+
+	return rc;
+}
+
+static int octeon3_eth_common_ndo_stop(struct net_device *netdev)
+{
+	struct octeon3_ethernet *priv = netdev_priv(netdev);
+	void **w;
+	struct sk_buff *skb;
+	struct octeon3_rx *rx;
+	int i;
+
+	/* Allow enough time for ingress in transit packets to be drained */
+	msleep(20);
+
+	/* Wait until sso has no more work for this interface */
+	for (i = 0; i < priv->num_rx_cxt; i++) {
+		rx = priv->rx_cxt + i;
+		while (oct_csr_read(SSO_GRP_AQ_CNT(priv->node, rx->rx_grp)))
+			msleep(20);
+	}
+
+	/* Free the irq and napi context for each rx context */
+	for (i = 0; i < priv->num_rx_cxt; i++) {
+		rx = priv->rx_cxt + i;
+		octeon3_sso_irq_set(priv->node, rx->rx_grp, false);
+		irq_set_affinity_hint(rx->rx_irq, NULL);
+		free_irq(rx->rx_irq, rx);
+		irq_dispose_mapping(rx->rx_irq);
+		rx->rx_irq = 0;
+		napi_disable(&rx->napi);
+		netif_napi_del(&rx->napi);
+	}
+
+	/* Free the packet buffers */
+	for (;;) {
+		w = octeon_fpa3_alloc(priv->node, priv->pki_aura);
+		if (!w)
+			break;
+		skb = w[0];
+		dev_kfree_skb(skb);
+	}
+
+	return 0;
+}
+
+static int octeon3_eth_bgx_ndo_stop(struct net_device *netdev)
+{
+	int r;
+
+	r = bgx_port_disable(netdev);
+	if (r)
+		return r;
+
+	return octeon3_eth_common_ndo_stop(netdev);
+}
+
+static inline u64 build_pko_send_hdr_desc(struct sk_buff *skb)
+{
+	u64	send_hdr = 0;
+	u8	l4_hdr = 0;
+	u64	checksum_alg;
+
+	/* See PKO_SEND_HDR_S in the HRM for the send header descriptor
+	 * format.
+	 */
+#ifdef __LITTLE_ENDIAN
+	send_hdr |= BIT(43);
+#endif
+
+	if (!OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+		/* Don't allocate to L2 */
+		send_hdr |= BIT(42);
+	}
+
+	/* Don't automatically free to FPA */
+	send_hdr |= BIT(40);
+
+	send_hdr |= skb->len;
+
+	if (skb->ip_summed != CHECKSUM_NONE &&
+	    skb->ip_summed != CHECKSUM_UNNECESSARY) {
+#ifndef BROKEN_SIMULATOR_CSUM
+		switch (skb->protocol) {
+		case htons(ETH_P_IP):
+			send_hdr |= ETH_HLEN << 16;
+			send_hdr |= BIT(45);
+			l4_hdr = ip_hdr(skb)->protocol;
+			send_hdr |= (ETH_HLEN + (4 * ip_hdr(skb)->ihl)) << 24;
+			break;
+
+		case htons(ETH_P_IPV6):
+			l4_hdr = ipv6_hdr(skb)->nexthdr;
+			send_hdr |= ETH_HLEN << 16;
+			break;
+
+		default:
+			break;
+		}
+#endif
+
+		checksum_alg = 1; /* UDP == 1 */
+		switch (l4_hdr) {
+		case IPPROTO_SCTP:
+			if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+				break;
+			checksum_alg++; /* SCTP == 3 */
+			/* Fall through */
+		case IPPROTO_TCP: /* TCP == 2 */
+			checksum_alg++;
+			/* Fall through */
+		case IPPROTO_UDP:
+			if (skb_transport_header_was_set(skb)) {
+				int l4ptr = skb_transport_header(skb) -
+					skb->data;
+				send_hdr &= ~GENMASK_ULL(31, 24);
+				send_hdr |= l4ptr << 24;
+				send_hdr |= checksum_alg << 46;
+			}
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	return send_hdr;
+}
+
+static inline u64 build_pko_send_ext_desc(struct sk_buff *skb)
+{
+	u64	send_ext = 0;
+
+	/* See PKO_SEND_EXT_S in the HRM for the send extended descriptor
+	 * format.
+	 */
+	skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+	send_ext |= (u64)PKO_SENDSUBDC_EXT << 44;
+	send_ext |= 1ull << 40;
+	send_ext |= BIT(39);
+	send_ext |= ETH_HLEN << 16;
+
+	return send_ext;
+}
+
+static inline u64 build_pko_send_tso(struct sk_buff *skb, uint mtu)
+{
+	u64	send_tso = 0;
+
+	/* See PKO_SEND_TSO_S in the HRM for the send tso descriptor format */
+	send_tso |= 12ull << 56;
+	send_tso |= (u64)PKO_SENDSUBDC_TSO << 44;
+	send_tso |= (skb_transport_offset(skb) + tcp_hdrlen(skb)) << 24;
+	send_tso |= (mtu + ETH_HLEN) << 8;
+
+	return send_tso;
+}
+
+static inline u64 build_pko_send_mem_sub(u64 addr)
+{
+	u64	send_mem = 0;
+
+	/* See PKO_SEND_MEM_S in the HRM for the send mem descriptor format */
+	send_mem |= (u64)PKO_SENDSUBDC_MEM << 44;
+	send_mem |= (u64)MEMDSZ_B64 << 60;
+	send_mem |= (u64)MEMALG_SUB << 56;
+	send_mem |= 1ull << 48;
+	send_mem |= addr;
+
+	return send_mem;
+}
+
+static inline u64 build_pko_send_mem_ts(u64 addr)
+{
+	u64	send_mem = 0;
+
+	/* See PKO_SEND_MEM_S in the HRM for the send mem descriptor format */
+	send_mem |= 1ull << 62;
+	send_mem |= (u64)PKO_SENDSUBDC_MEM << 44;
+	send_mem |= (u64)MEMDSZ_B64 << 60;
+	send_mem |= (u64)MEMALG_SETTSTMP << 56;
+	send_mem |= addr;
+
+	return send_mem;
+}
+
+static inline u64 build_pko_send_free(u64 addr)
+{
+	u64	send_free = 0;
+
+	/* See PKO_SEND_FREE_S in the HRM for the send free descriptor format */
+	send_free |= (u64)PKO_SENDSUBDC_FREE << 44;
+	send_free |= addr;
+
+	return send_free;
+}
+
+static inline u64 build_pko_send_work(int grp, u64 addr)
+{
+	u64	send_work = 0;
+
+	/* See PKO_SEND_WORK_S in the HRM for the send work descriptor format */
+	send_work |= (u64)PKO_SENDSUBDC_WORK << 44;
+	send_work |= (u64)grp << 52;
+	send_work |= 2ull << 50;
+	send_work |= addr;
+
+	return send_work;
+}
+
+static int octeon3_eth_ndo_start_xmit(struct sk_buff *skb,
+				      struct net_device *netdev)
+{
+	struct sk_buff *skb_tmp;
+	struct octeon3_ethernet *priv = netdev_priv(netdev);
+	u64 scr_off = LMTDMA_SCR_OFFSET;
+	u64 pko_send_desc;
+	u64 lmtdma_data;
+	u64 aq_cnt = 0;
+	struct octeon3_ethernet_node *oen;
+	long backlog;
+	int frag_count;
+	u64 head_len;
+	int i;
+	u64 *dma_addr;
+	void **work;
+	unsigned int mss;
+	int grp;
+
+	frag_count = 0;
+	if (skb_has_frag_list(skb))
+		skb_walk_frags(skb, skb_tmp)
+			frag_count++;
+
+	/* Stop the queue if pko or sso are not keeping up */
+	oen = octeon3_eth_node + priv->node;
+	aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(oen->node, oen->tx_complete_grp));
+	aq_cnt &= GENMASK_ULL(32, 0);
+	backlog = atomic64_inc_return(&priv->tx_backlog);
+	if (unlikely(backlog > MAX_TX_QUEUE_DEPTH || aq_cnt > 100000))
+		netif_stop_queue(netdev);
+
+	/* We have space for 11 segment pointers, If there will be
+	 * more than that, we must linearize.  The count is: 1 (base
+	 * SKB) + frag_count + nr_frags.
+	 */
+	if (unlikely(skb_shinfo(skb)->nr_frags + frag_count > 10)) {
+		if (unlikely(__skb_linearize(skb)))
+			goto skip_xmit;
+		frag_count = 0;
+	}
+
+	work = (void **)skb->cb;
+	work[0] = netdev;
+	work[1] = NULL;
+
+	/* Adjust the port statistics. */
+	atomic64_inc(&priv->tx_packets);
+	atomic64_add(skb->len, &priv->tx_octets);
+
+	/* Make sure packet data writes are committed before
+	 * submitting the command below
+	 */
+	wmb();
+
+	/* Build the pko command */
+	pko_send_desc = build_pko_send_hdr_desc(skb);
+	preempt_disable();
+	scratch_write64(scr_off, pko_send_desc);
+	scr_off += sizeof(pko_send_desc);
+
+	/* Request packet to be ptp timestamped */
+	if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
+	    unlikely(priv->tx_timestamp_hw)) {
+		pko_send_desc = build_pko_send_ext_desc(skb);
+		scratch_write64(scr_off, pko_send_desc);
+		scr_off += sizeof(pko_send_desc);
+	}
+
+	/* Add the tso descriptor if needed */
+	mss = skb_shinfo(skb)->gso_size;
+	if (unlikely(mss)) {
+		pko_send_desc = build_pko_send_tso(skb, netdev->mtu);
+		scratch_write64(scr_off, pko_send_desc);
+		scr_off += sizeof(pko_send_desc);
+	}
+
+	/* Add a gather descriptor for each segment. See PKO_SEND_GATHER_S for
+	 * the send gather descriptor format.
+	 */
+	pko_send_desc = 0;
+	pko_send_desc |= (u64)PKO_SENDSUBDC_GATHER << 45;
+	head_len = skb_headlen(skb);
+	if (head_len > 0) {
+		pko_send_desc |= head_len << 48;
+		pko_send_desc |= virt_to_phys(skb->data);
+		scratch_write64(scr_off, pko_send_desc);
+		scr_off += sizeof(pko_send_desc);
+	}
+	for (i = 1; i <= skb_shinfo(skb)->nr_frags; i++) {
+		struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i - 1;
+
+		pko_send_desc &= ~(GENMASK_ULL(63, 48) | GENMASK_ULL(41, 0));
+		pko_send_desc |= (u64)fs->size << 48;
+		pko_send_desc |= virt_to_phys((u8 *)page_address(fs->page.p) + fs->page_offset);
+		scratch_write64(scr_off, pko_send_desc);
+		scr_off += sizeof(pko_send_desc);
+	}
+	skb_walk_frags(skb, skb_tmp) {
+		pko_send_desc &= ~(GENMASK_ULL(63, 48) | GENMASK_ULL(41, 0));
+		pko_send_desc |= (u64)skb_tmp->len << 48;
+		pko_send_desc |= virt_to_phys(skb_tmp->data);
+		scratch_write64(scr_off, pko_send_desc);
+		scr_off += sizeof(pko_send_desc);
+	}
+
+	/* Subtract 1 from the tx_backlog. */
+	pko_send_desc = build_pko_send_mem_sub(virt_to_phys(&priv->tx_backlog));
+	scratch_write64(scr_off, pko_send_desc);
+	scr_off += sizeof(pko_send_desc);
+
+	/* Write the ptp timestamp in the skb itself */
+	if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
+	    unlikely(priv->tx_timestamp_hw)) {
+		pko_send_desc = build_pko_send_mem_ts(virt_to_phys(&work[1]));
+		scratch_write64(scr_off, pko_send_desc);
+		scr_off += sizeof(pko_send_desc);
+	}
+
+	/* Send work when finished with the packet. */
+	grp = octeon3_eth_lgrp_to_ggrp(priv->node, priv->tx_complete_grp);
+	pko_send_desc = build_pko_send_work(grp, virt_to_phys(work));
+	scratch_write64(scr_off, pko_send_desc);
+	scr_off += sizeof(pko_send_desc);
+
+	/* See PKO_SEND_DMA_S in the HRM for the lmtdam data format */
+	lmtdma_data = 0;
+	lmtdma_data |= (u64)(LMTDMA_SCR_OFFSET >> 3) << 56;
+	if (wait_pko_response)
+		lmtdma_data |= 1ull << 48;
+	lmtdma_data |= 0x51ull << 40;
+	lmtdma_data |= (u64)priv->node << 36;
+	lmtdma_data |= priv->pko_queue << 16;
+
+	dma_addr = (u64 *)(LMTDMA_ORDERED_IO_ADDR | ((scr_off & 0x78) - 8));
+	*dma_addr = lmtdma_data;
+
+	preempt_enable();
+
+	if (wait_pko_response) {
+		u64	query_rtn;
+
+		CVMX_SYNCIOBDMA;
+
+		/* See PKO_QUERY_RTN_S in the HRM for the return format */
+		query_rtn = scratch_read64(LMTDMA_SCR_OFFSET);
+		query_rtn >>= 60;
+		if (unlikely(query_rtn != PKO_DQSTATUS_PASS)) {
+			netdev_err(netdev, "PKO enqueue failed %llx\n",
+				   (unsigned long long)query_rtn);
+			dev_kfree_skb_any(skb);
+		}
+	}
+
+	return NETDEV_TX_OK;
+skip_xmit:
+	atomic64_inc(&priv->tx_dropped);
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
+
+static void octeon3_eth_ndo_get_stats64(struct net_device *netdev,
+					struct rtnl_link_stats64 *s)
+{
+	struct octeon3_ethernet *priv = netdev_priv(netdev);
+	u64 packets, octets, dropped;
+	u64 delta_packets, delta_octets, delta_dropped;
+
+	spin_lock(&priv->stat_lock);
+
+	octeon3_pki_get_stats(priv->node, priv->pknd, &packets, &octets, &dropped);
+
+	delta_packets = (packets - priv->last_packets) & ((1ull << 48) - 1);
+	delta_octets = (octets - priv->last_octets) & ((1ull << 48) - 1);
+	delta_dropped = (dropped - priv->last_dropped) & ((1ull << 48) - 1);
+
+	priv->last_packets = packets;
+	priv->last_octets = octets;
+	priv->last_dropped = dropped;
+
+	spin_unlock(&priv->stat_lock);
+
+	atomic64_add(delta_packets, &priv->rx_packets);
+	atomic64_add(delta_octets, &priv->rx_octets);
+	atomic64_add(delta_dropped, &priv->rx_dropped);
+
+	s->rx_packets = atomic64_read(&priv->rx_packets);
+	s->rx_bytes = atomic64_read(&priv->rx_octets);
+	s->rx_dropped = atomic64_read(&priv->rx_dropped);
+	s->rx_errors = atomic64_read(&priv->rx_errors);
+	s->rx_length_errors = atomic64_read(&priv->rx_length_errors);
+	s->rx_crc_errors = atomic64_read(&priv->rx_crc_errors);
+
+	s->tx_packets = atomic64_read(&priv->tx_packets);
+	s->tx_bytes = atomic64_read(&priv->tx_octets);
+	s->tx_dropped = atomic64_read(&priv->tx_dropped);
+}
+
+static int octeon3_eth_set_mac_address(struct net_device *netdev, void *addr)
+{
+	int r = eth_mac_addr(netdev, addr);
+
+	if (r)
+		return r;
+
+	bgx_port_set_rx_filtering(netdev);
+
+	return 0;
+}
+
+static u64 octeon3_cyclecounter_read(const struct cyclecounter *cc)
+{
+	struct octeon3_ethernet	*priv;
+	u64			count;
+
+	priv = container_of(cc, struct octeon3_ethernet, cc);
+	count = oct_csr_read(MIO_PTP_CLOCK_HI(priv->node));
+	return count;
+}
+
+static int octeon3_bgx_hwtstamp(struct net_device *netdev, int en)
+{
+	struct octeon3_ethernet		*priv = netdev_priv(netdev);
+	u64				data;
+
+	switch (bgx_port_get_mode(priv->node, priv->interface, priv->index)) {
+	case PORT_MODE_RGMII:
+	case PORT_MODE_SGMII:
+		data = oct_csr_read(BGX_GMP_GMI_RX_FRM_CTL(priv->node, priv->interface, priv->index));
+		if (en)
+			data |= BIT(12);
+		else
+			data &= ~BIT(12);
+		oct_csr_write(data, BGX_GMP_GMI_RX_FRM_CTL(priv->node, priv->interface, priv->index));
+		break;
+
+	case PORT_MODE_XAUI:
+	case PORT_MODE_RXAUI:
+	case PORT_MODE_10G_KR:
+	case PORT_MODE_XLAUI:
+	case PORT_MODE_40G_KR4:
+	case PORT_MODE_XFI:
+		data = oct_csr_read(BGX_SMU_RX_FRM_CTL(priv->node, priv->interface, priv->index));
+		if (en)
+			data |= BIT(12);
+		else
+			data &= ~BIT(12);
+		oct_csr_write(data, BGX_SMU_RX_FRM_CTL(priv->node, priv->interface, priv->index));
+		break;
+
+	default:
+		/* No timestamp support*/
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int octeon3_pki_hwtstamp(struct net_device *netdev, int en)
+{
+	struct octeon3_ethernet		*priv = netdev_priv(netdev);
+	int				skip = en ? 8 : 0;
+
+	octeon3_pki_set_ptp_skip(priv->node, priv->pknd, skip);
+
+	return 0;
+}
+
+static int octeon3_ioctl_hwtstamp(struct net_device *netdev,
+				  struct ifreq *rq, int cmd)
+{
+	struct octeon3_ethernet		*priv = netdev_priv(netdev);
+	u64				data;
+	struct hwtstamp_config		config;
+	int				en;
+
+	/* The PTP block should be enabled */
+	data = oct_csr_read(MIO_PTP_CLOCK_CFG(priv->node));
+	if (!(data & BIT(0))) {
+		netdev_err(netdev, "Error: PTP clock not enabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (copy_from_user(&config, rq->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	if (config.flags) /* reserved for future extensions */
+		return -EINVAL;
+
+	switch (config.tx_type) {
+	case HWTSTAMP_TX_OFF:
+		priv->tx_timestamp_hw = 0;
+		break;
+	case HWTSTAMP_TX_ON:
+		priv->tx_timestamp_hw = 1;
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	switch (config.rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		priv->rx_timestamp_hw = 0;
+		en = 0;
+		break;
+	case HWTSTAMP_FILTER_ALL:
+	case HWTSTAMP_FILTER_SOME:
+	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		priv->rx_timestamp_hw = 1;
+		en = 1;
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	octeon3_bgx_hwtstamp(netdev, en);
+	octeon3_pki_hwtstamp(netdev, en);
+
+	priv->cc.read = octeon3_cyclecounter_read;
+	priv->cc.mask = CYCLECOUNTER_MASK(64);
+	/* Ptp counter is always in nsec */
+	priv->cc.mult = 1;
+	priv->cc.shift = 0;
+	timecounter_init(&priv->tc, &priv->cc, ktime_to_ns(ktime_get_real()));
+
+	return 0;
+}
+
+static int octeon3_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+	struct octeon3_ethernet	*priv;
+	u64			comp;
+	u64			diff;
+	int			neg_ppb = 0;
+
+	priv = container_of(ptp, struct octeon3_ethernet, ptp_info);
+
+	if (ppb < 0) {
+		ppb = -ppb;
+		neg_ppb = 1;
+	}
+
+	/* The part per billion (ppb) is a delta from the base frequency */
+	comp = (NSEC_PER_SEC << 32) / octeon_get_io_clock_rate();
+
+	diff = comp;
+	diff *= ppb;
+	diff = div_u64(diff, 1000000000ULL);
+
+	comp = neg_ppb ? comp - diff : comp + diff;
+
+	oct_csr_write(comp, MIO_PTP_CLOCK_COMP(priv->node));
+
+	return 0;
+}
+
+static int octeon3_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+	struct octeon3_ethernet	*priv;
+	s64			now;
+	unsigned long		flags;
+
+	priv = container_of(ptp, struct octeon3_ethernet, ptp_info);
+
+	spin_lock_irqsave(&priv->ptp_lock, flags);
+	now = timecounter_read(&priv->tc);
+	now += delta;
+	timecounter_init(&priv->tc, &priv->cc, now);
+	spin_unlock_irqrestore(&priv->ptp_lock, flags);
+
+	return 0;
+}
+
+static int octeon3_gettime(struct ptp_clock_info *ptp, struct timespec *ts)
+{
+	struct octeon3_ethernet	*priv;
+	u64			ns;
+	u32			remainder;
+	unsigned long		flags;
+
+	priv = container_of(ptp, struct octeon3_ethernet, ptp_info);
+
+	spin_lock_irqsave(&priv->ptp_lock, flags);
+	ns = timecounter_read(&priv->tc);
+	spin_unlock_irqrestore(&priv->ptp_lock, flags);
+	ts->tv_sec = div_u64_rem(ns, 1000000000ULL, &remainder);
+	ts->tv_nsec = remainder;
+
+	return 0;
+}
+
+static int octeon3_settime(struct ptp_clock_info *ptp,
+			   const struct timespec *ts)
+{
+	struct octeon3_ethernet	*priv;
+	u64			ns;
+	unsigned long		flags;
+
+	priv = container_of(ptp, struct octeon3_ethernet, ptp_info);
+	ns = timespec_to_ns(ts);
+
+	spin_lock_irqsave(&priv->ptp_lock, flags);
+	timecounter_init(&priv->tc, &priv->cc, ns);
+	spin_unlock_irqrestore(&priv->ptp_lock, flags);
+
+	return 0;
+}
+
+static int octeon3_enable(struct ptp_clock_info *ptp,
+			  struct ptp_clock_request *rq, int on)
+{
+	return -EOPNOTSUPP;
+}
+
+static int octeon3_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	int rc;
+
+	switch (cmd) {
+	case SIOCSHWTSTAMP:
+		rc = octeon3_ioctl_hwtstamp(netdev, ifr, cmd);
+		break;
+
+	default:
+		rc = bgx_port_do_ioctl(netdev, ifr, cmd);
+		break;
+	}
+
+	return rc;
+}
+
+static const struct net_device_ops octeon3_eth_netdev_ops = {
+	.ndo_init		= octeon3_eth_bgx_ndo_init,
+	.ndo_uninit		= octeon3_eth_ndo_uninit,
+	.ndo_open		= octeon3_eth_bgx_ndo_open,
+	.ndo_stop		= octeon3_eth_bgx_ndo_stop,
+	.ndo_start_xmit		= octeon3_eth_ndo_start_xmit,
+	.ndo_get_stats64	= octeon3_eth_ndo_get_stats64,
+	.ndo_set_rx_mode	= bgx_port_set_rx_filtering,
+	.ndo_set_mac_address	= octeon3_eth_set_mac_address,
+	.ndo_change_mtu		= octeon3_eth_ndo_change_mtu,
+	.ndo_do_ioctl		= octeon3_ioctl,
+};
+
+static int octeon3_eth_probe(struct platform_device *pdev)
+{
+	struct octeon3_ethernet *priv;
+	struct net_device *netdev;
+	int r;
+
+	struct mac_platform_data *pd = dev_get_platdata(&pdev->dev);
+
+	r = octeon3_eth_global_init(pd->numa_node, pdev);
+	if (r)
+		return r;
+
+	dev_info(&pdev->dev, "Probing %d-%d:%d\n",
+		 pd->numa_node, pd->interface, pd->port);
+	netdev = alloc_etherdev(sizeof(struct octeon3_ethernet));
+	if (!netdev) {
+		dev_err(&pdev->dev, "Failed to allocated ethernet device\n");
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+	dev_set_drvdata(&pdev->dev, netdev);
+
+	if (pd->mac_type == BGX_MAC)
+		bgx_port_set_netdev(pdev->dev.parent, netdev);
+	priv = netdev_priv(netdev);
+	priv->netdev = netdev;
+	priv->mac_type = pd->mac_type;
+	INIT_LIST_HEAD(&priv->list);
+	priv->node = pd->numa_node;
+
+	mutex_lock(&octeon3_eth_node[priv->node].device_list_lock);
+	list_add_tail_rcu(&priv->list, &octeon3_eth_node[priv->node].device_list);
+	mutex_unlock(&octeon3_eth_node[priv->node].device_list_lock);
+
+	priv->index = pd->port;
+	priv->interface = pd->interface;
+	spin_lock_init(&priv->stat_lock);
+
+	if (pd->src_type == XCV)
+		snprintf(netdev->name, IFNAMSIZ, "rgmii%d", pd->port);
+
+	if (priv->mac_type == BGX_MAC)
+		netdev->netdev_ops = &octeon3_eth_netdev_ops;
+
+	if (register_netdev(netdev) < 0) {
+		dev_err(&pdev->dev, "Failed to register ethernet device\n");
+		list_del(&priv->list);
+		free_netdev(netdev);
+	}
+
+	spin_lock_init(&priv->ptp_lock);
+	priv->ptp_info.owner = THIS_MODULE;
+	snprintf(priv->ptp_info.name, 16, "octeon3 ptp");
+	priv->ptp_info.max_adj = 250000000;
+	priv->ptp_info.n_alarm = 0;
+	priv->ptp_info.n_ext_ts = 0;
+	priv->ptp_info.n_per_out = 0;
+	priv->ptp_info.pps = 0;
+	priv->ptp_info.adjfreq = octeon3_adjfreq;
+	priv->ptp_info.adjtime = octeon3_adjtime;
+	priv->ptp_info.gettime64 = octeon3_gettime;
+	priv->ptp_info.settime64 = octeon3_settime;
+	priv->ptp_info.enable = octeon3_enable;
+	priv->ptp_clock = ptp_clock_register(&priv->ptp_info, &pdev->dev);
+
+	netdev_info(netdev, "Registered\n");
+	return 0;
+}
+
+/**
+ * octeon3_eth_global_exit - Free all the used resources and restore the
+ *			     hardware to the default state.
+ * @node: Node to free/reset.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+static int octeon3_eth_global_exit(int node)
+{
+	struct octeon3_ethernet_node	*oen = octeon3_eth_node + node;
+	int				i;
+
+	/* Free the tx_complete irq */
+	octeon3_sso_irq_set(node, oen->tx_complete_grp, false);
+	irq_set_affinity_hint(oen->tx_irq, NULL);
+	free_irq(oen->tx_irq, oen);
+	irq_dispose_mapping(oen->tx_irq);
+	oen->tx_irq = 0;
+
+	/* Stop the worker threads */
+	for (i = 0; i < ARRAY_SIZE(oen->workers); i++)
+		kthread_stop(oen->workers[i].task);
+
+	/* Shutdown pki */
+	octeon3_pki_shutdown(node);
+	octeon_fpa3_release_pool(node, oen->pki_packet_pool);
+	kfree(oen->pki_packet_pool_stack);
+
+	/* Shutdown pko */
+	octeon3_pko_exit_global(node);
+	for (;;) {
+		void **w;
+
+		w = octeon_fpa3_alloc(node, oen->pko_aura);
+		if (!w)
+			break;
+		kmem_cache_free(octeon3_eth_sso_pko_cache, w);
+	}
+	octeon_fpa3_release_aura(node, oen->pko_aura);
+	octeon_fpa3_release_pool(node, oen->pko_pool);
+	kfree(oen->pko_pool_stack);
+
+	/* Shutdown sso */
+	octeon3_sso_shutdown(node, oen->sso_aura);
+	octeon3_sso_free_grp(node, oen->tx_complete_grp);
+	for (;;) {
+		void **w;
+
+		w = octeon_fpa3_alloc(node, oen->sso_aura);
+		if (!w)
+			break;
+		kmem_cache_free(octeon3_eth_sso_pko_cache, w);
+	}
+	octeon_fpa3_release_aura(node, oen->sso_aura);
+	octeon_fpa3_release_pool(node, oen->sso_pool);
+	kfree(oen->sso_pool_stack);
+
+	return 0;
+}
+
+static int octeon3_eth_remove(struct platform_device *pdev)
+{
+	struct net_device		*netdev = dev_get_drvdata(&pdev->dev);
+	struct octeon3_ethernet		*priv = netdev_priv(netdev);
+	int				node = priv->node;
+	struct octeon3_ethernet_node	*oen = octeon3_eth_node + node;
+	struct mac_platform_data	*pd = dev_get_platdata(&pdev->dev);
+
+	ptp_clock_unregister(priv->ptp_clock);
+	unregister_netdev(netdev);
+	if (pd->mac_type == BGX_MAC)
+		bgx_port_set_netdev(pdev->dev.parent, NULL);
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	/* Free all resources when there are no more devices */
+	mutex_lock(&octeon3_eth_init_mutex);
+	mutex_lock(&oen->device_list_lock);
+	list_del_rcu(&priv->list);
+	if (oen->init_done && list_empty(&oen->device_list)) {
+		oen->init_done = false;
+		octeon3_eth_global_exit(node);
+	}
+
+	mutex_unlock(&oen->device_list_lock);
+	mutex_unlock(&octeon3_eth_init_mutex);
+	free_netdev(netdev);
+
+	return 0;
+}
+
+static void octeon3_eth_shutdown(struct platform_device *pdev)
+{
+	octeon3_eth_remove(pdev);
+}
+
+static struct platform_driver octeon3_eth_driver = {
+	.probe		= octeon3_eth_probe,
+	.remove		= octeon3_eth_remove,
+	.shutdown       = octeon3_eth_shutdown,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "ethernet-mac-pki",
+	},
+};
+
+static int __init octeon3_eth_init(void)
+{
+	if (rx_queues <= 0)
+		rx_queues = 1;
+	if (rx_queues > MAX_RX_QUEUES)
+		rx_queues = MAX_RX_QUEUES;
+
+	return platform_driver_register(&octeon3_eth_driver);
+}
+module_init(octeon3_eth_init);
+
+static void __exit octeon3_eth_exit(void)
+{
+	platform_driver_unregister(&octeon3_eth_driver);
+
+	/* Destroy the memory cache used by sso and pko */
+	kmem_cache_destroy(octeon3_eth_sso_pko_cache);
+}
+module_exit(octeon3_eth_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium, Inc. PKI/PKO Ethernet driver.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-pki.c b/drivers/net/ethernet/cavium/octeon/octeon3-pki.c
new file mode 100644
index 000000000000..38bc294808e9
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-pki.c
@@ -0,0 +1,833 @@ 
+/*
+ * Copyright (c) 2017 Cavium, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/firmware.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+#define PKI_CLUSTER_FIRMWARE		"cavium/pki-cluster.bin"
+#define VERSION_LEN			8
+
+#define MAX_CLUSTERS			4
+#define MAX_BANKS			2
+#define MAX_BANK_ENTRIES		192
+#define PKI_NUM_QPG_ENTRY		2048
+#define PKI_NUM_STYLE			256
+#define PKI_NUM_FINAL_STYLE		64
+#define MAX_PKNDS			64
+
+/* Registers are accessed via xkphys */
+#define PKI_BASE			0x1180044000000ull
+#define PKI_ADDR(node)			(SET_XKPHYS + NODE_OFFSET(node) +      \
+					 PKI_BASE)
+
+#define PKI_SFT_RST(n)			(PKI_ADDR(n)		     + 0x000010)
+#define PKI_BUF_CTL(n)			(PKI_ADDR(n)		     + 0x000100)
+#define PKI_STAT_CTL(n)			(PKI_ADDR(n)		     + 0x000110)
+#define PKI_ICG_CFG(n)			(PKI_ADDR(n)		     + 0x00a000)
+
+#define CLUSTER_OFFSET(c)		((c) << 16)
+#define CL_ADDR(n, c)			(PKI_ADDR(n) + CLUSTER_OFFSET(c))
+#define PKI_CL_ECC_CTL(n, c)		(CL_ADDR(n, c)		     + 0x00c020)
+
+#define PKI_STYLE_BUF(n, s)		(PKI_ADDR(n) + ((s) << 3)    + 0x024000)
+
+#define PKI_LTYPE_MAP(n, l)		(PKI_ADDR(n) + ((l) << 3)    + 0x005000)
+#define PKI_IMEM(n, i)			(PKI_ADDR(n) + ((i) << 3)    + 0x100000)
+
+#define PKI_CL_PKIND_CFG(n, c, p)	(CL_ADDR(n, c) + ((p) << 8)  + 0x300040)
+#define PKI_CL_PKIND_STYLE(n, c, p)	(CL_ADDR(n, c) + ((p) << 8)  + 0x300048)
+#define PKI_CL_PKIND_SKIP(n, c, p)	(CL_ADDR(n, c) + ((p) << 8)  + 0x300050)
+#define PKI_CL_PKIND_L2_CUSTOM(n, c, p)	(CL_ADDR(n, c) + ((p) << 8)  + 0x300058)
+#define PKI_CL_PKIND_LG_CUSTOM(n, c, p)	(CL_ADDR(n, c) + ((p) << 8)  + 0x300060)
+
+#define STYLE_OFFSET(s)			((s) << 3)
+#define STYLE_ADDR(n, c, s)		(PKI_ADDR(n) + CLUSTER_OFFSET(c) +     \
+					 STYLE_OFFSET(s))
+#define PKI_CL_STYLE_CFG(n, c, s)	(STYLE_ADDR(n, c, s)	     + 0x500000)
+#define PKI_CL_STYLE_CFG2(n, c, s)	(STYLE_ADDR(n, c, s)	     + 0x500800)
+#define PKI_CLX_STYLEX_ALG(n, c, s)	(STYLE_ADDR(n, c, s)	     + 0x501000)
+
+#define PCAM_OFFSET(bank)		((bank) << 12)
+#define PCAM_ENTRY_OFFSET(entry)	((entry) << 3)
+#define PCAM_ADDR(n, c, b, e)		(PKI_ADDR(n) + CLUSTER_OFFSET(c) +     \
+					 PCAM_OFFSET(b) + PCAM_ENTRY_OFFSET(e))
+#define PKI_CL_PCAM_TERM(n, c, b, e)	(PCAM_ADDR(n, c, b, e)	     + 0x700000)
+#define PKI_CL_PCAM_MATCH(n, c, b, e)	(PCAM_ADDR(n, c, b, e)	     + 0x704000)
+#define PKI_CL_PCAM_ACTION(n, c, b, e)	(PCAM_ADDR(n, c, b, e)	     + 0x708000)
+
+#define PKI_QPG_TBLX(n, i)		(PKI_ADDR(n) + ((i) << 3)    + 0x800000)
+#define PKI_AURAX_CFG(n, a)		(PKI_ADDR(n) + ((a) << 3)    + 0x900000)
+#define PKI_STATX_STAT0(n, p)		(PKI_ADDR(n) + ((p) << 8)    + 0xe00038)
+#define PKI_STATX_STAT1(n, p)		(PKI_ADDR(n) + ((p) << 8)    + 0xe00040)
+#define PKI_STATX_STAT3(n, p)		(PKI_ADDR(n) + ((p) << 8)    + 0xe00050)
+
+enum pcam_term {
+	NONE		= 0x0,
+	L2_CUSTOM	= 0x2,
+	HIGIGD		= 0x4,
+	HIGIG		= 0x5,
+	SMACH		= 0x8,
+	SMACL		= 0x9,
+	DMACH		= 0xa,
+	DMACL		= 0xb,
+	GLORT		= 0x12,
+	DSA		= 0x13,
+	ETHTYPE0	= 0x18,
+	ETHTYPE1	= 0x19,
+	ETHTYPE2	= 0x1a,
+	ETHTYPE3	= 0x1b,
+	MPLS0		= 0x1e,
+	L3_SIPHH	= 0x1f,
+	L3_SIPMH	= 0x20,
+	L3_SIPML	= 0x21,
+	L3_SIPLL	= 0x22,
+	L3_FLAGS	= 0x23,
+	L3_DIPHH	= 0x24,
+	L3_DIPMH	= 0x25,
+	L3_DIPML	= 0x26,
+	L3_DIPLL	= 0x27,
+	LD_VNI		= 0x28,
+	IL3_FLAGS	= 0x2b,
+	LF_SPI		= 0x2e,
+	L4_SPORT	= 0x2f,
+	L4_PORT		= 0x30,
+	LG_CUSTOM	= 0x39
+};
+
+enum pki_ltype {
+	LTYPE_NONE		= 0x00,
+	LTYPE_ENET		= 0x01,
+	LTYPE_VLAN		= 0x02,
+	LTYPE_SNAP_PAYLD	= 0x05,
+	LTYPE_ARP		= 0x06,
+	LTYPE_RARP		= 0x07,
+	LTYPE_IP4		= 0x08,
+	LTYPE_IP4_OPT		= 0x09,
+	LTYPE_IP6		= 0x0a,
+	LTYPE_IP6_OPT		= 0x0b,
+	LTYPE_IPSEC_ESP		= 0x0c,
+	LTYPE_IPFRAG		= 0x0d,
+	LTYPE_IPCOMP		= 0x0e,
+	LTYPE_TCP		= 0x10,
+	LTYPE_UDP		= 0x11,
+	LTYPE_SCTP		= 0x12,
+	LTYPE_UDP_VXLAN		= 0x13,
+	LTYPE_GRE		= 0x14,
+	LTYPE_NVGRE		= 0x15,
+	LTYPE_GTP		= 0x16,
+	LTYPE_UDP_GENEVE	= 0x17,
+	LTYPE_SW28		= 0x1c,
+	LTYPE_SW29		= 0x1d,
+	LTYPE_SW30		= 0x1e,
+	LTYPE_SW31		= 0x1f
+};
+
+enum pki_beltype {
+	BELTYPE_NONE	= 0x00,
+	BELTYPE_MISC	= 0x01,
+	BELTYPE_IP4	= 0x02,
+	BELTYPE_IP6	= 0x03,
+	BELTYPE_TCP	= 0x04,
+	BELTYPE_UDP	= 0x05,
+	BELTYPE_SCTP	= 0x06,
+	BELTYPE_SNAP	= 0x07
+};
+
+struct ltype_beltype {
+	enum pki_ltype		ltype;
+	enum pki_beltype	beltype;
+};
+
+/**
+ * struct pcam_term_info - Describes a term to configure in the pcam.
+ * @term: Identifies the term to configure.
+ * @term_mask: Specifies don't cares in the term.
+ * @style: Style to compare.
+ * @style_mask: Specifies don't cares in the style.
+ * @data: Data to compare.
+ * @data_mask: Specifies don't cares in the data.
+ */
+struct pcam_term_info {
+	u8	term;
+	u8	term_mask;
+	u8	style;
+	u8	style_mask;
+	u32	data;
+	u32	data_mask;
+};
+
+/**
+ * struct fw_hdr - Describes the firmware.
+ * @version: Firmware version.
+ * @size: Size of the data in bytes.
+ * @data: Actual firmware data.
+ */
+struct fw_hdr {
+	char	version[VERSION_LEN];
+	u64	size;
+	u64	data[];
+};
+
+static struct ltype_beltype	dflt_ltype_config[] = {
+	{ LTYPE_NONE,		BELTYPE_NONE },
+	{ LTYPE_ENET,		BELTYPE_MISC },
+	{ LTYPE_VLAN,		BELTYPE_MISC },
+	{ LTYPE_SNAP_PAYLD,	BELTYPE_MISC },
+	{ LTYPE_ARP,		BELTYPE_MISC },
+	{ LTYPE_RARP,		BELTYPE_MISC },
+	{ LTYPE_IP4,		BELTYPE_IP4  },
+	{ LTYPE_IP4_OPT,	BELTYPE_IP4  },
+	{ LTYPE_IP6,		BELTYPE_IP6  },
+	{ LTYPE_IP6_OPT,	BELTYPE_IP6  },
+	{ LTYPE_IPSEC_ESP,	BELTYPE_MISC },
+	{ LTYPE_IPFRAG,		BELTYPE_MISC },
+	{ LTYPE_IPCOMP,		BELTYPE_MISC },
+	{ LTYPE_TCP,		BELTYPE_TCP  },
+	{ LTYPE_UDP,		BELTYPE_UDP  },
+	{ LTYPE_SCTP,		BELTYPE_SCTP },
+	{ LTYPE_UDP_VXLAN,	BELTYPE_UDP  },
+	{ LTYPE_GRE,		BELTYPE_MISC },
+	{ LTYPE_NVGRE,		BELTYPE_MISC },
+	{ LTYPE_GTP,		BELTYPE_MISC },
+	{ LTYPE_UDP_GENEVE,	BELTYPE_UDP  },
+	{ LTYPE_SW28,		BELTYPE_MISC },
+	{ LTYPE_SW29,		BELTYPE_MISC },
+	{ LTYPE_SW30,		BELTYPE_MISC },
+	{ LTYPE_SW31,		BELTYPE_MISC }
+};
+
+static int get_num_clusters(void)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+		return 2;
+	return 4;
+}
+
+static int octeon3_pki_pcam_alloc_entry(int	node,
+					int	entry,
+					int	bank)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+	int				num_clusters;
+	int				rc;
+	int				i;
+
+	/* Allocate a pcam entry for cluster0*/
+	strncpy((char *)&tag.lo, "cvm_pcam", 8);
+	snprintf(buf, 16, "_%d%d%d....", node, 0, bank);
+	memcpy(&tag.hi, buf, 8);
+
+	res_mgr_create_resource(tag, MAX_BANK_ENTRIES);
+	rc = res_mgr_alloc(tag, entry, false);
+	if (rc < 0)
+		return rc;
+
+	entry = rc;
+
+	/* Need to allocate entries for all clusters as se code needs it */
+	num_clusters = get_num_clusters();
+	for (i = 1; i < num_clusters; i++) {
+		strncpy((char *)&tag.lo, "cvm_pcam", 8);
+		snprintf(buf, 16, "_%d%d%d....", node, i, bank);
+		memcpy(&tag.hi, buf, 8);
+
+		res_mgr_create_resource(tag, MAX_BANK_ENTRIES);
+		rc = res_mgr_alloc(tag, entry, false);
+		if (rc < 0) {
+			int	j;
+
+			pr_err("octeon3-pki: Failed to allocate pcam entry\n");
+			/* Undo whatever we've did */
+			for (j = 0; i < i; j++) {
+				strncpy((char *)&tag.lo, "cvm_pcam", 8);
+				snprintf(buf, 16, "_%d%d%d....", node, j, bank);
+				memcpy(&tag.hi, buf, 8);
+				res_mgr_free(tag, entry);
+			}
+
+			return -1;
+		}
+	}
+
+	return entry;
+}
+
+static int octeon3_pki_pcam_write_entry(int			node,
+					struct pcam_term_info	*term_info)
+{
+	int	bank;
+	int	entry;
+	int	num_clusters;
+	u64	term;
+	u64	match;
+	u64	action;
+	int	i;
+
+	/* Bit 0 of the pcam term determines the bank to use */
+	bank = term_info->term & 1;
+
+	/* Allocate a pcam entry */
+	entry = octeon3_pki_pcam_alloc_entry(node, -1, bank);
+	if (entry < 0)
+		return entry;
+
+	term = 1ull << 63;
+	term |= (u64)(term_info->term & term_info->term_mask) << 40;
+	term |= (~term_info->term & term_info->term_mask) << 8;
+	term |= (u64)(term_info->style & term_info->style_mask) << 32;
+	term |= ~term_info->style & term_info->style_mask;
+
+	match = (u64)(term_info->data & term_info->data_mask) << 32;
+	match |= ~term_info->data & term_info->data_mask;
+
+	action = 0;
+	if (term_info->term >= ETHTYPE0 && term_info->term <= ETHTYPE3) {
+		action |= 2 << 8;
+		action |= 4;
+	}
+
+	/* Must write the term to all clusters */
+	num_clusters = get_num_clusters();
+	for (i = 0; i < num_clusters; i++) {
+		oct_csr_write(0, PKI_CL_PCAM_TERM(node, i, bank, entry));
+		oct_csr_write(match, PKI_CL_PCAM_MATCH(node, i, bank, entry));
+		oct_csr_write(action, PKI_CL_PCAM_ACTION(node, i, bank, entry));
+		oct_csr_write(term, PKI_CL_PCAM_TERM(node, i, bank, entry));
+	}
+
+	return 0;
+}
+
+static int octeon3_pki_alloc_qpg_entry(int node)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+	int				entry;
+
+	/* Allocate a qpg entry */
+	strncpy((char *)&tag.lo, "cvm_qpge", 8);
+	snprintf(buf, 16, "t_%d.....", node);
+	memcpy(&tag.hi, buf, 8);
+
+	res_mgr_create_resource(tag, PKI_NUM_QPG_ENTRY);
+	entry = res_mgr_alloc(tag, -1, false);
+	if (entry < 0)
+		pr_err("octeon3-pki: Failed to allocate qpg entry");
+
+	return entry;
+}
+
+static int octeon3_pki_alloc_style(int node)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+	int				entry;
+
+	/* Allocate a style entry */
+	strncpy((char *)&tag.lo, "cvm_styl", 8);
+	snprintf(buf, 16, "e_%d.....", node);
+	memcpy(&tag.hi, buf, 8);
+
+	res_mgr_create_resource(tag, PKI_NUM_STYLE);
+	entry = res_mgr_alloc(tag, -1, false);
+	if (entry < 0)
+		pr_err("octeon3-pki: Failed to allocate style");
+
+	return entry;
+}
+
+int octeon3_pki_set_ptp_skip(int node, int pknd, int skip)
+{
+	u64	data;
+	int	num_clusters;
+	u64	i;
+
+	num_clusters = get_num_clusters();
+	for (i = 0; i < num_clusters; i++) {
+		data = oct_csr_read(PKI_CL_PKIND_SKIP(node, i, pknd));
+		data &= ~(GENMASK_ULL(15, 8) | GENMASK_ULL(7, 0));
+		data |= (skip << 8) | skip;
+		oct_csr_write(data, PKI_CL_PKIND_SKIP(node, i, pknd));
+
+		data = oct_csr_read(PKI_CL_PKIND_L2_CUSTOM(node, i, pknd));
+		data &= ~GENMASK_ULL(7, 0);
+		data |= skip;
+		oct_csr_write(data, PKI_CL_PKIND_L2_CUSTOM(node, i, pknd));
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_set_ptp_skip);
+
+/**
+ * octeon3_pki_get_stats - Get the statistics for a given pknd (port).
+ * @node: Node to get statistics for..
+ * @pknd: Pknd to get statistis for.
+ * @packets: Updated with the number of packets received.
+ * @octets: Updated with the number of octets received.
+ * @dropped: Updated with the number of dropped packets.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+int octeon3_pki_get_stats(int	node,
+			  int	pknd,
+			  u64	*packets,
+			  u64	*octets,
+			  u64	*dropped)
+{
+	/* PKI-20775, must read until not all ones. */
+	do {
+		*packets = oct_csr_read(PKI_STATX_STAT0(node, pknd));
+	} while (*packets == 0xffffffffffffffffull);
+
+	do {
+		*octets = oct_csr_read(PKI_STATX_STAT1(node, pknd));
+	} while (*octets == 0xffffffffffffffffull);
+
+	do {
+		*dropped = oct_csr_read(PKI_STATX_STAT3(node, pknd));
+	} while (*dropped == 0xffffffffffffffffull);
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_get_stats);
+
+/**
+ * octeon3_pki_port_init - Initialize a port.
+ * @node: Node port is using.
+ * @aura: Aura to use for packet buffers.
+ * @grp: SSO group packets will be queued up for.
+ * @skip: Extra bytes to skip before packet data.
+ * @mb_size: Size of packet buffers.
+ * @pknd: Port kind assigned to the port.
+ * @num_rx_cxt: Number of sso groups used by the port.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+int octeon3_pki_port_init(int	node,
+			  int	aura,
+			  int	grp,
+			  int	skip,
+			  int	mb_size,
+			  int	pknd,
+			  int	num_rx_cxt)
+{
+	int	qpg_entry;
+	int	style;
+	u64	data;
+	int	num_clusters;
+	u64	i;
+
+	/* Allocate and configure a qpg table entry for the port's group */
+	i = 0;
+	while ((num_rx_cxt & (1 << i)) == 0)
+		i++;
+	qpg_entry = octeon3_pki_alloc_qpg_entry(node);
+	data = oct_csr_read(PKI_QPG_TBLX(node, qpg_entry));
+	data &= ~(GENMASK_ULL(59, 48) | GENMASK_ULL(47, 45) |
+		  GENMASK_ULL(41, 32) | GENMASK_ULL(31, 29) |
+		  GENMASK_ULL(25, 16) | GENMASK_ULL(9, 0));
+	data |= i << 45;
+	data |= ((u64)((node << 8) | grp) << 32);
+	data |= i << 29;
+	data |= (((node << 8) | grp) << 16);
+	data |= aura;
+	oct_csr_write(data, PKI_QPG_TBLX(node, qpg_entry));
+
+	/* Allocate a style for the port */
+	style = octeon3_pki_alloc_style(node);
+
+	/* Map the qpg table entry to the style */
+	num_clusters = get_num_clusters();
+	for (i = 0; i < num_clusters; i++) {
+		data = BIT(29) | BIT(22) | qpg_entry;
+		oct_csr_write(data, PKI_CL_STYLE_CFG(node, i, style));
+
+		/* Specify the tag generation rules and checksum to use */
+		oct_csr_write(0xfff49f, PKI_CL_STYLE_CFG2(node, i, style));
+
+		data = BIT(31);
+		oct_csr_write(data, PKI_CLX_STYLEX_ALG(node, i, style));
+	}
+
+	/* Set the style's buffer size and skips:
+	 *	Every buffer has 128 bytes reserved for Linux.
+	 *	The first buffer must also skip the wqe (40 bytes).
+	 *	Srio also requires skipping its header (skip)
+	 */
+	data = 1ull << 28;
+	data |= ((128 + 40 + skip) / 8) << 22;
+	data |= (128 / 8) << 16;
+	data |= (mb_size & ~0xf) / 8;
+	oct_csr_write(data, PKI_STYLE_BUF(node, style));
+
+	/* Assign the initial style to the port via the pknd */
+	for (i = 0; i < num_clusters; i++) {
+		data = oct_csr_read(PKI_CL_PKIND_STYLE(node, i, pknd));
+		data &= ~GENMASK_ULL(7, 0);
+		data |= style;
+		oct_csr_write(data, PKI_CL_PKIND_STYLE(node, i, pknd));
+	}
+
+	/* Enable red */
+	data = BIT(18);
+	oct_csr_write(data, PKI_AURAX_CFG(node, aura));
+
+	/* Clear statistic counters */
+	oct_csr_write(0, PKI_STATX_STAT0(node, pknd));
+	oct_csr_write(0, PKI_STATX_STAT1(node, pknd));
+	oct_csr_write(0, PKI_STATX_STAT3(node, pknd));
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_port_init);
+
+/**
+ * octeon3_pki_port_shutdown - Release all the resources used by a port.
+ * @node: Node port is on.
+ * @pknd: Pknd assigned to the port.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+int octeon3_pki_port_shutdown(int node, int pknd)
+{
+	/* Nothing at the moment */
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_port_shutdown);
+
+/**
+ * octeon3_pki_cluster_init - Loads the cluster firmware into the pki clusters.
+ * @node: Node to configure.
+ * @pdev: Device requesting the firmware.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+int octeon3_pki_cluster_init(int node, struct platform_device *pdev)
+{
+	const struct firmware	*pki_fw;
+	const struct fw_hdr	*hdr;
+	const u64		*data;
+	int			i;
+	int			rc;
+
+	rc = request_firmware(&pki_fw, PKI_CLUSTER_FIRMWARE, &pdev->dev);
+	if (rc) {
+		dev_err(&pdev->dev, "octeon3-pki: Failed to load %s error=%d\n",
+			PKI_CLUSTER_FIRMWARE, rc);
+		return rc;
+	}
+
+	/* Verify the firmware is valid */
+	hdr = (const struct fw_hdr *)pki_fw->data;
+	if ((pki_fw->size - sizeof(const struct fw_hdr) != hdr->size) ||
+	    hdr->size % 8) {
+		dev_err(&pdev->dev, ("octeon3-pki: Corrupted PKI firmware\n"));
+		goto err;
+	}
+
+	dev_info(&pdev->dev, "octeon3-pki: Loading PKI firmware %s\n",
+		 hdr->version);
+	data = hdr->data;
+	for (i = 0; i < hdr->size / 8; i++) {
+		oct_csr_write(cpu_to_be64(*data), PKI_IMEM(node, i));
+		data++;
+	}
+
+err:
+	release_firmware(pki_fw);
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_cluster_init);
+
+/**
+ * octeon3_pki_vlan_init - Configures the pcam to recognize the vlan ethtypes.
+ * @node:			Node to configure.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+int octeon3_pki_vlan_init(int node)
+{
+	u64	data;
+	int	i;
+	int	rc;
+
+	/* PKI-20858 */
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+		for (i = 0; i < 4; i++) {
+			data = oct_csr_read(PKI_CL_ECC_CTL(node, i));
+			data &= ~BIT(63);
+			data |= BIT(4) | BIT(3);
+			oct_csr_write(data, PKI_CL_ECC_CTL(node, i));
+		}
+	}
+
+	/* Configure the pcam ethtype0 and ethtype1 terms */
+	for (i = ETHTYPE0; i <= ETHTYPE1; i++) {
+		struct pcam_term_info	term_info;
+
+		/* Term for 0x8100 ethtype */
+		term_info.term = i;
+		term_info.term_mask = 0xfd;
+		term_info.style = 0;
+		term_info.style_mask = 0;
+		term_info.data = 0x81000000;
+		term_info.data_mask = 0xffff0000;
+		rc = octeon3_pki_pcam_write_entry(node, &term_info);
+		if (rc)
+			return rc;
+
+		/* Term for 0x88a8 ethtype */
+		term_info.data = 0x88a80000;
+		rc = octeon3_pki_pcam_write_entry(node, &term_info);
+		if (rc)
+			return rc;
+
+		/* Term for 0x9200 ethtype */
+		term_info.data = 0x92000000;
+		rc = octeon3_pki_pcam_write_entry(node, &term_info);
+		if (rc)
+			return rc;
+
+		/* Term for 0x9100 ethtype */
+		term_info.data = 0x91000000;
+		rc = octeon3_pki_pcam_write_entry(node, &term_info);
+		if (rc)
+			return rc;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_vlan_init);
+
+/**
+ * octeon3_pki_ltype_init - Configures the pki layer types.
+ * @node:			Node to configure.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+int octeon3_pki_ltype_init(int node)
+{
+	enum pki_ltype	ltype;
+	u64		data;
+	int		i;
+
+	for (i = 0; i < ARRAY_SIZE(dflt_ltype_config); i++) {
+		ltype = dflt_ltype_config[i].ltype;
+		data = oct_csr_read(PKI_LTYPE_MAP(node, ltype));
+		data &= ~GENMASK_ULL(2, 0);
+		data |= dflt_ltype_config[i].beltype;
+		oct_csr_write(data, PKI_LTYPE_MAP(node, ltype));
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_ltype_init);
+
+int octeon3_pki_srio_init(int node, int pknd)
+{
+	u64	data;
+	int	num_clusters;
+	int	style;
+	int	i;
+
+	num_clusters = get_num_clusters();
+	for (i = 0; i < num_clusters; i++) {
+		data = oct_csr_read(PKI_CL_PKIND_STYLE(node, i, pknd));
+		style = data & GENMASK_ULL(7, 0);
+		data &= ~GENMASK_ULL(14, 8);
+		oct_csr_write(data, PKI_CL_PKIND_STYLE(node, i, pknd));
+
+		/* Disable packet length errors and fcs */
+		data = oct_csr_read(PKI_CL_STYLE_CFG(node, i, style));
+		data &= ~(BIT(29) | BIT(26) | BIT(25) | BIT(23) | BIT(22));
+		oct_csr_write(data, PKI_CL_STYLE_CFG(node, i, style));
+
+		/* Packets have no fcs */
+		data = oct_csr_read(PKI_CL_PKIND_CFG(node, i, pknd));
+		data &= ~BIT(7);
+		oct_csr_write(data, PKI_CL_PKIND_CFG(node, i, pknd));
+
+		/* Skip the srio header and the INST_HDR_S data */
+		data = oct_csr_read(PKI_CL_PKIND_SKIP(node, i, pknd));
+		data &= ~(GENMASK_ULL(15, 8) | GENMASK_ULL(7, 0));
+		data |= (16 << 8) | 16;
+		oct_csr_write(data, PKI_CL_PKIND_SKIP(node, i, pknd));
+
+		/* Exclude port number from qpg */
+		data = oct_csr_read(PKI_CLX_STYLEX_ALG(node, i, style));
+		data &= ~GENMASK_ULL(20, 17);
+		oct_csr_write(data, PKI_CLX_STYLEX_ALG(node, i, style));
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_srio_init);
+
+/**
+ * octeon3_pki_enable - Enable the pki.
+ * @node: Node to configure.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+int octeon3_pki_enable(int node)
+{
+	u64	data;
+	int	timeout;
+
+	/* Enable backpressure */
+	data = oct_csr_read(PKI_BUF_CTL(node));
+	data |= BIT(2);
+	oct_csr_write(data, PKI_BUF_CTL(node));
+
+	/* Enable cluster parsing */
+	data = oct_csr_read(PKI_ICG_CFG(node));
+	data |= BIT(24);
+	oct_csr_write(data, PKI_ICG_CFG(node));
+
+	/* Wait until the pki is out of reset */
+	timeout = 10000;
+	do {
+		data = oct_csr_read(PKI_SFT_RST(node));
+		if (!(data & BIT(63)))
+			break;
+		timeout--;
+		udelay(1);
+	} while (timeout);
+	if (!timeout) {
+		pr_err("octeon3-pki: timeout waiting for reset\n");
+		return -1;
+	}
+
+	/* Enable the pki */
+	data = oct_csr_read(PKI_BUF_CTL(node));
+	data |= BIT(0);
+	oct_csr_write(data, PKI_BUF_CTL(node));
+
+	/* Statistics are kept per pkind */
+	oct_csr_write(0, PKI_STAT_CTL(node));
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_enable);
+
+void octeon3_pki_shutdown(int node)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+	u64				data;
+	int				timeout;
+	int				i;
+	int				j;
+	int				k;
+
+	/* Disable the pki */
+	data = oct_csr_read(PKI_BUF_CTL(node));
+	if (data & BIT(0)) {
+		data &= ~BIT(0);
+		oct_csr_write(data, PKI_BUF_CTL(node));
+
+		/* Wait until the pki has finished processing packets */
+		timeout = 10000;
+		do {
+			data = oct_csr_read(PKI_SFT_RST(node));
+			if (data & BIT(32))
+				break;
+			timeout--;
+			udelay(1);
+		} while (timeout);
+		if (!timeout)
+			pr_warn("octeon3_pki: disable timeout\n");
+	}
+
+	/* Free all prefetched fpa buffers back to the fpa */
+	data = oct_csr_read(PKI_BUF_CTL(node));
+	data |= BIT(5) | BIT(9);
+	oct_csr_write(data, PKI_BUF_CTL(node));
+	/* Dummy read to get the register write to take effect */
+	data = oct_csr_read(PKI_BUF_CTL(node));
+
+	/* Now we can reset the pki */
+	data = oct_csr_read(PKI_SFT_RST(node));
+	data |= BIT(0);
+	oct_csr_write(data, PKI_SFT_RST(node));
+	timeout = 10000;
+	do {
+		data = oct_csr_read(PKI_SFT_RST(node));
+		if ((data & BIT(63)) == 0)
+			break;
+		timeout--;
+		udelay(1);
+	} while (timeout);
+	if (!timeout)
+		pr_warn("octeon3_pki: reset timeout\n");
+
+	/* Free all the allocated resources. We should only free the resources
+	 * allocated by us (TODO).
+	 */
+	for (i = 0; i < PKI_NUM_STYLE; i++) {
+		strncpy((char *)&tag.lo, "cvm_styl", 8);
+		snprintf(buf, 16, "e_%d.....", node);
+		memcpy(&tag.hi, buf, 8);
+		res_mgr_free(tag, i);
+	}
+	for (i = 0; i < PKI_NUM_QPG_ENTRY; i++) {
+		strncpy((char *)&tag.lo, "cvm_qpge", 8);
+		snprintf(buf, 16, "t_%d.....", node);
+		memcpy(&tag.hi, buf, 8);
+		res_mgr_free(tag, i);
+	}
+	for (i = 0; i < get_num_clusters(); i++) {
+		for (j = 0; j < MAX_BANKS; j++) {
+			strncpy((char *)&tag.lo, "cvm_pcam", 8);
+			snprintf(buf, 16, "_%d%d%d....", node, i, j);
+			memcpy(&tag.hi, buf, 8);
+			for (k = 0; k < MAX_BANK_ENTRIES; k++)
+				res_mgr_free(tag, k);
+		}
+	}
+
+	/* Restore the registers back to their reset state. We should only reset
+	 * the registers used by us (TODO).
+	 */
+	for (i = 0; i < get_num_clusters(); i++) {
+		for (j = 0; j < MAX_PKNDS; j++) {
+			oct_csr_write(0, PKI_CL_PKIND_CFG(node, i, j));
+			oct_csr_write(0, PKI_CL_PKIND_STYLE(node, i, j));
+			oct_csr_write(0, PKI_CL_PKIND_SKIP(node, i, j));
+			oct_csr_write(0, PKI_CL_PKIND_L2_CUSTOM(node, i, j));
+			oct_csr_write(0, PKI_CL_PKIND_LG_CUSTOM(node, i, j));
+		}
+
+		for (j = 0; j < PKI_NUM_FINAL_STYLE; j++) {
+			oct_csr_write(0, PKI_CL_STYLE_CFG(node, i, j));
+			oct_csr_write(0, PKI_CL_STYLE_CFG2(node, i, j));
+			oct_csr_write(0, PKI_CLX_STYLEX_ALG(node, i, j));
+		}
+	}
+	for (i = 0; i < PKI_NUM_FINAL_STYLE; i++)
+		oct_csr_write((0x5 << 22) | 0x20, PKI_STYLE_BUF(node, i));
+}
+EXPORT_SYMBOL(octeon3_pki_shutdown);
+
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(PKI_CLUSTER_FIRMWARE);
+MODULE_AUTHOR("Carlos Munoz <cmunoz@cavium.com>");
+MODULE_DESCRIPTION("Cavium, Inc. PKI management.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-pko.c b/drivers/net/ethernet/cavium/octeon/octeon3-pko.c
new file mode 100644
index 000000000000..74dc55356e87
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-pko.c
@@ -0,0 +1,1719 @@ 
+/*
+ * Copyright (c) 2017 Cavium, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+#define MAX_OUTPUT_MAC			28
+#define MAX_FIFO_GRP			8
+
+#define FIFO_SIZE			2560
+
+/* Registers are accessed via xkphys */
+#define PKO_BASE			0x1540000000000ull
+#define PKO_ADDR(node)			(SET_XKPHYS + NODE_OFFSET(node) +      \
+					 PKO_BASE)
+
+#define PKO_L1_SQ_SHAPE(n, q)		(PKO_ADDR(n) + ((q) << 9)    + 0x000010)
+#define PKO_L1_SQ_LINK(n, q)		(PKO_ADDR(n) + ((q) << 9)    + 0x000038)
+#define PKO_DQ_WM_CTL(n, q)		(PKO_ADDR(n) + ((q) << 9)    + 0x000040)
+#define PKO_L1_SQ_TOPOLOGY(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x080000)
+#define PKO_L2_SQ_SCHEDULE(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x080008)
+#define PKO_L3_L2_SQ_CHANNEL(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x080038)
+#define PKO_CHANNEL_LEVEL(n)		(PKO_ADDR(n)		     + 0x0800f0)
+#define PKO_SHAPER_CFG(n)		(PKO_ADDR(n)		     + 0x0800f8)
+#define PKO_L2_SQ_TOPOLOGY(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x100000)
+#define PKO_L3_SQ_SCHEDULE(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x100008)
+#define PKO_L3_SQ_TOPOLOGY(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x180000)
+#define PKO_L4_SQ_SCHEDULE(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x180008)
+#define PKO_L4_SQ_TOPOLOGY(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x200000)
+#define PKO_L5_SQ_SCHEDULE(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x200008)
+#define PKO_L5_SQ_TOPOLOGY(n, q)	(PKO_ADDR(n) + ((q) << 9)    + 0x280000)
+#define PKO_DQ_SCHEDULE(n, q)		(PKO_ADDR(n) + ((q) << 9)    + 0x280008)
+#define PKO_DQ_SW_XOFF(n, q)		(PKO_ADDR(n) + ((q) << 9)    + 0x2800e0)
+#define PKO_DQ_TOPOLOGY(n, q)		(PKO_ADDR(n) + ((q) << 9)    + 0x300000)
+#define PKO_PDM_CFG(n)			(PKO_ADDR(n)		     + 0x800000)
+#define PKO_PDM_DQ_MINPAD(n, q)		(PKO_ADDR(n) + ((q) << 3)    + 0x8f0000)
+#define PKO_MAC_CFG(n, m)		(PKO_ADDR(n) + ((m) << 3)    + 0x900000)
+#define PKO_PTF_STATUS(n, f)		(PKO_ADDR(n) + ((f) << 3)    + 0x900100)
+#define PKO_PTGF_CFG(n, g)		(PKO_ADDR(n) + ((g) << 3)    + 0x900200)
+#define PKO_PTF_IOBP_CFG(n)		(PKO_ADDR(n)		     + 0x900300)
+#define PKO_MCI0_MAX_CRED(n, m)		(PKO_ADDR(n) + ((m) << 3)    + 0xa00000)
+#define PKO_MCI1_MAX_CRED(n, m)		(PKO_ADDR(n) + ((m) << 3)    + 0xa80000)
+#define PKO_LUT(n, c)			(PKO_ADDR(n) + ((c) << 3)    + 0xb00000)
+#define PKO_DPFI_STATUS(n)		(PKO_ADDR(n)		     + 0xc00000)
+#define PKO_DPFI_FLUSH(n)		(PKO_ADDR(n)		     + 0xc00008)
+#define PKO_DPFI_FPA_AURA(n)		(PKO_ADDR(n)		     + 0xc00010)
+#define PKO_DPFI_ENA(n)			(PKO_ADDR(n)		     + 0xc00018)
+#define PKO_STATUS(n)			(PKO_ADDR(n)		     + 0xd00000)
+#define PKO_ENABLE(n)			(PKO_ADDR(n)		     + 0xd00008)
+
+/* These levels mimic the pko internal linked queue structure */
+enum queue_level {
+	PQ	= 1,
+	L2_SQ	= 2,
+	L3_SQ	= 3,
+	L4_SQ	= 4,
+	L5_SQ	= 5,
+	DQ	= 6
+};
+
+enum pko_dqop_e {
+	DQOP_SEND,
+	DQOP_OPEN,
+	DQOP_CLOSE,
+	DQOP_QUERY
+};
+
+enum pko_dqstatus_e {
+	PASS = 0,
+	BADSTATE = 0x8,
+	NOFPABUF = 0x9,
+	NOPKOBUF = 0xa,
+	FAILRTNPTR = 0xb,
+	ALREADY = 0xc,
+	NOTCREATED = 0xd,
+	NOTEMPTY = 0xe,
+	SENDPKTDROP = 0xf
+};
+
+struct mac_info {
+	int	fifo_cnt;
+	int	prio;
+	int	speed;
+	int	fifo;
+	int	num_lmacs;
+};
+
+struct fifo_grp_info {
+	int	speed;
+	int	size;
+};
+
+static const int lut_index_78xx[] = {
+	0x200,
+	0x240,
+	0x280,
+	0x2c0,
+	0x300,
+	0x340
+};
+
+static const int lut_index_73xx[] = {
+	0x000,
+	0x040,
+	0x080
+};
+
+static enum queue_level max_sq_level(void)
+{
+	/* 73xx and 75xx only have 3 scheduler queue levels */
+	if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+		return L3_SQ;
+
+	return L5_SQ;
+}
+
+static int get_num_fifos(void)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+		return 16;
+
+	return 28;
+}
+
+static int get_num_fifo_groups(void)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+		return 5;
+
+	return 8;
+}
+
+static int get_num_output_macs(void)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+		return 28;
+	else if (OCTEON_IS_MODEL(OCTEON_CNF75XX))
+		return 10;
+	else if (OCTEON_IS_MODEL(OCTEON_CN73XX))
+		return 14;
+
+	return 0;
+}
+
+static int get_output_mac(int			interface,
+			  int			index,
+			  enum octeon3_mac_type	mac_type)
+{
+	int mac;
+
+	/* Output macs are hardcoded in the hardware. See PKO Output MACs
+	 * section in the HRM.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+		if (mac_type == SRIO_MAC)
+			mac = 4 + 2 * interface + index;
+		else
+			mac = 2 + 4 * interface + index;
+	} else {
+		mac = 4 + 4 * interface + index;
+	}
+
+	return mac;
+}
+
+static int get_num_port_queues(void)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+		return 16;
+
+	return 32;
+}
+
+static int allocate_queues(int			node,
+			   enum queue_level	level,
+			   int			num_queues,
+			   int			*queues)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+	int				max_queues = 0;
+	int				rc;
+
+	if (level == PQ) {
+		strncpy((char *)&tag.lo, "cvm_pkop", 8);
+		snprintf(buf, 16, "oq_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+			max_queues = 32;
+		else
+			max_queues = 16;
+	} else if (level == L2_SQ) {
+		strncpy((char *)&tag.lo, "cvm_pkol", 8);
+		snprintf(buf, 16, "2q_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+			max_queues = 512;
+		else
+			max_queues = 256;
+	} else if (level == L3_SQ) {
+		strncpy((char *)&tag.lo, "cvm_pkol", 8);
+		snprintf(buf, 16, "3q_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+			max_queues = 512;
+		else
+			max_queues = 256;
+	} else if (level == L4_SQ) {
+		strncpy((char *)&tag.lo, "cvm_pkol", 8);
+		snprintf(buf, 16, "4q_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+			max_queues = 1024;
+		else
+			max_queues = 0;
+	} else if (level == L5_SQ) {
+		strncpy((char *)&tag.lo, "cvm_pkol", 8);
+		snprintf(buf, 16, "5q_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+			max_queues = 1024;
+		else
+			max_queues = 0;
+	} else if (level == DQ) {
+		strncpy((char *)&tag.lo, "cvm_pkod", 8);
+		snprintf(buf, 16, "eq_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+			max_queues = 1024;
+		else
+			max_queues = 256;
+	}
+
+	res_mgr_create_resource(tag, max_queues);
+	rc = res_mgr_alloc_range(tag, -1, num_queues, false, queues);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static void free_queues(int			node,
+			enum queue_level	level,
+			int			num_queues,
+			const int		*queues)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+
+	if (level == PQ) {
+		strncpy((char *)&tag.lo, "cvm_pkop", 8);
+		snprintf(buf, 16, "oq_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+	} else if (level == L2_SQ) {
+		strncpy((char *)&tag.lo, "cvm_pkol", 8);
+		snprintf(buf, 16, "2q_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+	} else if (level == L3_SQ) {
+		strncpy((char *)&tag.lo, "cvm_pkol", 8);
+		snprintf(buf, 16, "3q_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+	} else if (level == L4_SQ) {
+		strncpy((char *)&tag.lo, "cvm_pkol", 8);
+		snprintf(buf, 16, "4q_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+	} else if (level == L5_SQ) {
+		strncpy((char *)&tag.lo, "cvm_pkol", 8);
+		snprintf(buf, 16, "5q_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+	} else if (level == DQ) {
+		strncpy((char *)&tag.lo, "cvm_pkod", 8);
+		snprintf(buf, 16, "eq_%d....", node);
+		memcpy(&tag.hi, buf, 8);
+	}
+
+	res_mgr_free_range(tag, queues, num_queues);
+}
+
+static int port_queue_init(int	node,
+			   int	pq,
+			   int	mac)
+{
+	u64	data;
+
+	data = mac << 16;
+	oct_csr_write(data, PKO_L1_SQ_TOPOLOGY(node, pq));
+
+	data = mac << 13;
+	oct_csr_write(data, PKO_L1_SQ_SHAPE(node, pq));
+
+	data = mac;
+	data <<= 44;
+	oct_csr_write(data, PKO_L1_SQ_LINK(node, pq));
+
+	return 0;
+}
+
+static int scheduler_queue_l2_init(int	node,
+				   int	queue,
+				   int	parent_q)
+{
+	u64	data;
+
+	data = oct_csr_read(PKO_L1_SQ_TOPOLOGY(node, parent_q));
+	data &= ~(GENMASK_ULL(40, 32) | GENMASK_ULL(4, 1));
+	data |= (u64)queue << 32;
+	data |= 0xf << 1;
+	oct_csr_write(data, PKO_L1_SQ_TOPOLOGY(node, parent_q));
+
+	oct_csr_write(0, PKO_L2_SQ_SCHEDULE(node, queue));
+
+	data = parent_q << 16;
+	oct_csr_write(data, PKO_L2_SQ_TOPOLOGY(node, queue));
+
+	return 0;
+}
+
+static int scheduler_queue_l3_init(int	node,
+				   int	queue,
+				   int	parent_q)
+{
+	u64	data;
+
+	data = oct_csr_read(PKO_L2_SQ_TOPOLOGY(node, parent_q));
+	data &= ~(GENMASK_ULL(40, 32) | GENMASK_ULL(4, 1));
+	data |= (u64)queue << 32;
+	data |= 0xf << 1;
+	oct_csr_write(data, PKO_L2_SQ_TOPOLOGY(node, parent_q));
+
+	oct_csr_write(0, PKO_L3_SQ_SCHEDULE(node, queue));
+
+	data = parent_q << 16;
+	oct_csr_write(data, PKO_L3_SQ_TOPOLOGY(node, queue));
+
+	return 0;
+}
+
+static int scheduler_queue_l4_init(int	node,
+				   int	queue,
+				   int	parent_q)
+{
+	u64	data;
+
+	data = oct_csr_read(PKO_L3_SQ_TOPOLOGY(node, parent_q));
+	data &= ~(GENMASK_ULL(41, 32) | GENMASK_ULL(4, 1));
+	data |= (u64)queue << 32;
+	data |= 0xf << 1;
+	oct_csr_write(data, PKO_L3_SQ_TOPOLOGY(node, parent_q));
+
+	oct_csr_write(0, PKO_L4_SQ_SCHEDULE(node, queue));
+
+	data = parent_q << 16;
+	oct_csr_write(data, PKO_L4_SQ_TOPOLOGY(node, queue));
+
+	return 0;
+}
+
+static int scheduler_queue_l5_init(int	node,
+				   int	queue,
+				   int	parent_q)
+{
+	u64	data;
+
+	data = oct_csr_read(PKO_L4_SQ_TOPOLOGY(node, parent_q));
+	data &= ~(GENMASK_ULL(41, 32) | GENMASK_ULL(4, 1));
+	data |= (u64)queue << 32;
+	data |= 0xf << 1;
+	oct_csr_write(data, PKO_L4_SQ_TOPOLOGY(node, parent_q));
+
+	oct_csr_write(0, PKO_L5_SQ_SCHEDULE(node, queue));
+
+	data = parent_q << 16;
+	oct_csr_write(data, PKO_L5_SQ_TOPOLOGY(node, queue));
+
+	return 0;
+}
+
+static int descriptor_queue_init(int		node,
+				 const int	*queue,
+				 int		parent_q,
+				 int		num_dq)
+{
+	u64	data;
+	u64	addr;
+	int	prio;
+	int	rr_prio;
+	int	rr_quantum;
+	int	i;
+
+	/* Limit static priorities to the available prio field bits */
+	if (num_dq > 9) {
+		pr_err("octeon3-pko: Invalid number of dqs\n");
+		return -1;
+	}
+
+	prio = 0;
+
+	if (num_dq == 1) {
+		/* Single dq */
+		rr_prio = 0xf;
+		rr_quantum = 0x10;
+	} else {
+		/* Multiple dqs */
+		rr_prio = num_dq;
+		rr_quantum = 0;
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+		addr = PKO_L5_SQ_TOPOLOGY(node, parent_q);
+	else
+		addr = PKO_L3_SQ_TOPOLOGY(node, parent_q);
+
+	data = oct_csr_read(addr);
+	data &= ~(GENMASK_ULL(41, 32) | GENMASK_ULL(4, 1));
+	data |= (u64)queue[0] << 32;
+	data |= rr_prio << 1;
+	oct_csr_write(data, addr);
+
+	for (i = 0; i < num_dq; i++) {
+		data = (prio << 24) | rr_quantum;
+		oct_csr_write(data, PKO_DQ_SCHEDULE(node, queue[i]));
+
+		data = parent_q << 16;
+		oct_csr_write(data, PKO_DQ_TOPOLOGY(node, queue[i]));
+
+		data = BIT(49);
+		oct_csr_write(data, PKO_DQ_WM_CTL(node, queue[i]));
+
+		if (prio << rr_prio)
+			prio++;
+	}
+
+	return 0;
+}
+
+static int map_channel(int	node,
+		       int	pq,
+		       int	queue,
+		       int	ipd_port)
+{
+	u64	data;
+	int	lut_index = 0;
+	int	table_index;
+
+	data = oct_csr_read(PKO_L3_L2_SQ_CHANNEL(node, queue));
+	data &= ~GENMASK_ULL(43, 32);
+	data |= (u64)ipd_port << 32;
+	oct_csr_write(data, PKO_L3_L2_SQ_CHANNEL(node, queue));
+
+	/* See PKO_LUT register description in the HRM for how to compose the
+	 * lut_index.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX)) {
+		table_index = ((ipd_port & 0xf00) - 0x800) >> 8;
+		lut_index = lut_index_78xx[table_index];
+		lut_index += ipd_port & 0xff;
+	} else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) {
+		table_index = ((ipd_port & 0xf00) - 0x800) >> 8;
+		lut_index = lut_index_73xx[table_index];
+		lut_index += ipd_port & 0xff;
+	} else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+		if ((ipd_port & 0xf00) != 0x800)
+			return -1;
+		lut_index = ipd_port & 0xff;
+	}
+
+	data = BIT(15);
+	data |= pq << 9;
+	data |= queue;
+	oct_csr_write(data, PKO_LUT(node, lut_index));
+
+	return 0;
+}
+
+static int open_dq(int node, int dq)
+{
+	u64			data;
+	u64			*iobdma_addr;
+	u64			*scratch_addr;
+	enum pko_dqstatus_e	status;
+
+	/* Build the dq open query. See PKO_QUERY_DMA_S in the HRM for the
+	 * query format.
+	 */
+	data = (LMTDMA_SCR_OFFSET >> 3) << 56;
+	data |= 1ull << 48;
+	data |= 0x51ull << 40;
+	data |= (u64)node << 36;
+	data |= (u64)DQOP_OPEN << 32;
+	data |= dq << 16;
+
+	CVMX_SYNCWS;
+	preempt_disable();
+
+	/* Clear return location */
+	scratch_addr = (u64 *)(SCRATCH_BASE + LMTDMA_SCR_OFFSET);
+	*scratch_addr = ~0ull;
+
+	/* Issue pko lmtdma command */
+	iobdma_addr = (u64 *)(IOBDMA_ORDERED_IO_ADDR);
+	*iobdma_addr = data;
+
+	/* Wait for lmtdma command to complete and get response*/
+	CVMX_SYNCIOBDMA;
+	data = *scratch_addr;
+
+	preempt_enable();
+
+	/* See PKO_QUERY_RTN_S in the HRM for response format */
+	status = (data & GENMASK_ULL(63, 60)) >> 60;
+	if (status != PASS && status != ALREADY) {
+		pr_err("octeon3-pko: Failed to open dq\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static s64 query_dq(int node, int dq)
+{
+	u64			data;
+	u64			*iobdma_addr;
+	u64			*scratch_addr;
+	enum pko_dqstatus_e	status;
+	s64			depth;
+
+	/* Build the dq open query. See PKO_QUERY_DMA_S in the HRM for the
+	 * query format.
+	 */
+	data = (LMTDMA_SCR_OFFSET >> 3) << 56;
+	data |= 1ull << 48;
+	data |= 0x51ull << 40;
+	data |= (u64)node << 36;
+	data |= (u64)DQOP_QUERY << 32;
+	data |= dq << 16;
+
+	CVMX_SYNCWS;
+	preempt_disable();
+
+	/* Clear return location */
+	scratch_addr = (u64 *)(SCRATCH_BASE + LMTDMA_SCR_OFFSET);
+	*scratch_addr = ~0ull;
+
+	/* Issue pko lmtdma command */
+	iobdma_addr = (u64 *)(IOBDMA_ORDERED_IO_ADDR);
+	*iobdma_addr = data;
+
+	/* Wait for lmtdma command to complete and get response*/
+	CVMX_SYNCIOBDMA;
+	data = *scratch_addr;
+
+	preempt_enable();
+
+	/* See PKO_QUERY_RTN_S in the HRM for response format */
+	status = (data & GENMASK_ULL(63, 60)) >> 60;
+	if (status != PASS) {
+		pr_err("octeon3-pko: Failed to query dq=%d\n", dq);
+		return -1;
+	}
+
+	depth = data & GENMASK_ULL(47, 0);
+
+	return depth;
+}
+
+static u64 close_dq(int node, int dq)
+{
+	u64			data;
+	u64			*iobdma_addr;
+	u64			*scratch_addr;
+	enum pko_dqstatus_e	status;
+
+	/* Build the dq open query. See PKO_QUERY_DMA_S in the HRM for the
+	 * query format.
+	 */
+	data = (LMTDMA_SCR_OFFSET >> 3) << 56;
+	data |= 1ull << 48;
+	data |= 0x51ull << 40;
+	data |= (u64)node << 36;
+	data |= (u64)DQOP_CLOSE << 32;
+	data |= dq << 16;
+
+	CVMX_SYNCWS;
+	preempt_disable();
+
+	/* Clear return location */
+	scratch_addr = (u64 *)(SCRATCH_BASE + LMTDMA_SCR_OFFSET);
+	*scratch_addr = ~0ull;
+
+	/* Issue pko lmtdma command */
+	iobdma_addr = (u64 *)(IOBDMA_ORDERED_IO_ADDR);
+	*iobdma_addr = data;
+
+	/* Wait for lmtdma command to complete and get response*/
+	CVMX_SYNCIOBDMA;
+	data = *scratch_addr;
+
+	preempt_enable();
+
+	/* See PKO_QUERY_RTN_S in the HRM for response format */
+	status = (data & GENMASK_ULL(63, 60)) >> 60;
+	if (status != PASS) {
+		pr_err("octeon3-pko: Failed to close dq\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int get_78xx_fifos_required(int node, struct mac_info *macs)
+{
+	int		fifo_cnt = 0;
+	int		bgx;
+	int		index;
+	int		qlm;
+	int		num_lmacs;
+	enum port_mode	mode;
+	int		i;
+	int		cnt;
+	int		prio;
+	u64		data;
+
+	/* The loopback mac gets 1 fifo by default */
+	macs[0].fifo_cnt = 1;
+	macs[0].speed = 1;
+	fifo_cnt += 1;
+
+	/* The dpi mac gets 1 fifo by default */
+	macs[1].fifo_cnt = 1;
+	macs[1].speed = 50;
+	fifo_cnt += 1;
+
+	/* The ilk macs get default number of fifos (module param) */
+	macs[2].fifo_cnt = ilk0_lanes <= 4 ? ilk0_lanes : 4;
+	macs[2].speed = 40;
+	fifo_cnt += macs[2].fifo_cnt;
+	macs[3].fifo_cnt = ilk1_lanes <= 4 ? ilk1_lanes : 4;
+	macs[3].speed = 40;
+	fifo_cnt += macs[3].fifo_cnt;
+
+	/* Assign fifos to the active bgx macs */
+	for (i = 4; i < get_num_output_macs(); i += 4) {
+		bgx = (i - 4) / 4;
+		qlm = bgx_port_get_qlm(node, bgx, 0);
+
+		data = oct_csr_read(GSER_CFG(node, qlm));
+		if (data & BIT(2)) {
+			data = oct_csr_read(BGX_CMR_TX_LMACS(node, bgx));
+			num_lmacs = data & 7;
+
+			for (index = 0; index < num_lmacs; index++) {
+				switch (num_lmacs) {
+				case 1:
+					macs[i + index].num_lmacs = 4;
+					break;
+				case 2:
+					macs[i + index].num_lmacs = 2;
+					break;
+				case 4:
+				default:
+					macs[i + index].num_lmacs = 1;
+					break;
+				}
+
+				mode = bgx_port_get_mode(node, bgx, 0);
+				switch (mode) {
+				case PORT_MODE_SGMII:
+				case PORT_MODE_RGMII:
+					macs[i + index].fifo_cnt = 1;
+					macs[i + index].prio = 1;
+					macs[i + index].speed = 1;
+					break;
+
+				case PORT_MODE_XAUI:
+				case PORT_MODE_RXAUI:
+					macs[i + index].fifo_cnt = 4;
+					macs[i + index].prio = 2;
+					macs[i + index].speed = 20;
+					break;
+
+				case PORT_MODE_10G_KR:
+				case PORT_MODE_XFI:
+					macs[i + index].fifo_cnt = 4;
+					macs[i + index].prio = 2;
+					macs[i + index].speed = 10;
+					break;
+
+				case PORT_MODE_40G_KR4:
+				case PORT_MODE_XLAUI:
+					macs[i + index].fifo_cnt = 4;
+					macs[i + index].prio = 3;
+					macs[i + index].speed = 40;
+					break;
+
+				default:
+					macs[i + index].fifo_cnt = 0;
+					macs[i + index].prio = 0;
+					macs[i + index].speed = 0;
+					macs[i + index].num_lmacs = 0;
+					break;
+				}
+
+				fifo_cnt += macs[i + index].fifo_cnt;
+			}
+		}
+	}
+
+	/* If more fifos than available were assigned, reduce the number of
+	 * fifos until within limit. Start with the lowest priority macs with 4
+	 * fifos.
+	 */
+	prio = 1;
+	cnt = 4;
+	while (fifo_cnt > get_num_fifos()) {
+		for (i = 0; i < get_num_output_macs(); i++) {
+			if (macs[i].prio == prio && macs[i].fifo_cnt == cnt) {
+				macs[i].fifo_cnt >>= 1;
+				fifo_cnt -= macs[i].fifo_cnt;
+			}
+
+			if (fifo_cnt <= get_num_fifos())
+				break;
+		}
+
+		if (prio >= 3) {
+			prio = 1;
+			cnt >>= 1;
+		} else {
+			prio++;
+		}
+
+		if (cnt == 0)
+			break;
+	}
+
+	/* Assign left over fifos to dpi */
+	if (get_num_fifos() - fifo_cnt > 0) {
+		if (get_num_fifos() - fifo_cnt >= 3) {
+			macs[1].fifo_cnt += 3;
+			fifo_cnt -= 3;
+		} else {
+			macs[1].fifo_cnt += 1;
+			fifo_cnt -= 1;
+		}
+	}
+
+	return 0;
+}
+
+static int get_75xx_fifos_required(int node, struct mac_info *macs)
+{
+	int		fifo_cnt = 0;
+	int		bgx;
+	int		index;
+	int		qlm;
+	enum port_mode	mode;
+	int		i;
+	int		cnt;
+	int		prio;
+	u64		data;
+
+	/* The loopback mac gets 1 fifo by default */
+	macs[0].fifo_cnt = 1;
+	macs[0].speed = 1;
+	fifo_cnt += 1;
+
+	/* The dpi mac gets 1 fifo by default */
+	macs[1].fifo_cnt = 1;
+	macs[1].speed = 50;
+	fifo_cnt += 1;
+
+	/* Assign fifos to the active bgx macs */
+	bgx = 0;
+	for (i = 2; i < 6; i++) {
+		index = i - 2;
+		qlm = bgx_port_get_qlm(node, bgx, index);
+		data = oct_csr_read(GSER_CFG(node, qlm));
+		if (data & BIT(2)) {
+			macs[i].num_lmacs = 1;
+
+			mode = bgx_port_get_mode(node, bgx, index);
+			switch (mode) {
+			case PORT_MODE_SGMII:
+			case PORT_MODE_RGMII:
+				macs[i].fifo_cnt = 1;
+				macs[i].prio = 1;
+				macs[i].speed = 1;
+				break;
+
+			case PORT_MODE_10G_KR:
+			case PORT_MODE_XFI:
+				macs[i].fifo_cnt = 4;
+				macs[i].prio = 2;
+				macs[i].speed = 10;
+				break;
+
+			default:
+				macs[i].fifo_cnt = 0;
+				macs[i].prio = 0;
+				macs[i].speed = 0;
+				macs[i].num_lmacs = 0;
+				break;
+			}
+
+			fifo_cnt += macs[i].fifo_cnt;
+		}
+	}
+
+	/* If more fifos than available were assigned, reduce the number of
+	 * fifos until within limit. Start with the lowest priority macs with 4
+	 * fifos.
+	 */
+	prio = 1;
+	cnt = 4;
+	while (fifo_cnt > get_num_fifos()) {
+		for (i = 0; i < get_num_output_macs(); i++) {
+			if (macs[i].prio == prio && macs[i].fifo_cnt == cnt) {
+				macs[i].fifo_cnt >>= 1;
+				fifo_cnt -= macs[i].fifo_cnt;
+			}
+
+			if (fifo_cnt <= get_num_fifos())
+				break;
+		}
+
+		if (prio >= 3) {
+			prio = 1;
+			cnt >>= 1;
+		} else {
+			prio++;
+		}
+
+		if (cnt == 0)
+			break;
+	}
+
+	/* Assign left over fifos to dpi */
+	if (get_num_fifos() - fifo_cnt > 0) {
+		if (get_num_fifos() - fifo_cnt >= 3) {
+			macs[1].fifo_cnt += 3;
+			fifo_cnt -= 3;
+		} else {
+			macs[1].fifo_cnt += 1;
+			fifo_cnt -= 1;
+		}
+	}
+
+	return 0;
+}
+
+static int get_73xx_fifos_required(int node, struct mac_info *macs)
+{
+	int		fifo_cnt = 0;
+	int		bgx;
+	int		index;
+	int		qlm;
+	int		num_lmacs;
+	enum port_mode	mode;
+	int		i;
+	int		cnt;
+	int		prio;
+	u64		data;
+
+	/* The loopback mac gets 1 fifo by default */
+	macs[0].fifo_cnt = 1;
+	macs[0].speed = 1;
+	fifo_cnt += 1;
+
+	/* The dpi mac gets 1 fifo by default */
+	macs[1].fifo_cnt = 1;
+	macs[1].speed = 50;
+	fifo_cnt += 1;
+
+	/* Assign fifos to the active bgx macs */
+	for (i = 2; i < get_num_output_macs(); i += 4) {
+		bgx = (i - 2) / 4;
+		qlm = bgx_port_get_qlm(node, bgx, 0);
+		data = oct_csr_read(GSER_CFG(node, qlm));
+
+		/* Bgx2 can be connected to dlm 5, 6, or both */
+		if (bgx == 2) {
+			if (!(data & BIT(2))) {
+				qlm = bgx_port_get_qlm(node, bgx, 2);
+				data = oct_csr_read(GSER_CFG(node, qlm));
+			}
+		}
+
+		if (data & BIT(2)) {
+			data = oct_csr_read(BGX_CMR_TX_LMACS(node, bgx));
+			num_lmacs = data & 7;
+
+			for (index = 0; index < num_lmacs; index++) {
+				switch (num_lmacs) {
+				case 1:
+					macs[i + index].num_lmacs = 4;
+					break;
+				case 2:
+					macs[i + index].num_lmacs = 2;
+					break;
+				case 4:
+				default:
+					macs[i + index].num_lmacs = 1;
+					break;
+				}
+
+				mode = bgx_port_get_mode(node, bgx, index);
+				switch (mode) {
+				case PORT_MODE_SGMII:
+				case PORT_MODE_RGMII:
+					macs[i + index].fifo_cnt = 1;
+					macs[i + index].prio = 1;
+					macs[i + index].speed = 1;
+					break;
+
+				case PORT_MODE_XAUI:
+				case PORT_MODE_RXAUI:
+					macs[i + index].fifo_cnt = 4;
+					macs[i + index].prio = 2;
+					macs[i + index].speed = 20;
+					break;
+
+				case PORT_MODE_10G_KR:
+				case PORT_MODE_XFI:
+					macs[i + index].fifo_cnt = 4;
+					macs[i + index].prio = 2;
+					macs[i + index].speed = 10;
+					break;
+
+				case PORT_MODE_40G_KR4:
+				case PORT_MODE_XLAUI:
+					macs[i + index].fifo_cnt = 4;
+					macs[i + index].prio = 3;
+					macs[i + index].speed = 40;
+					break;
+
+				default:
+					macs[i + index].fifo_cnt = 0;
+					macs[i + index].prio = 0;
+					macs[i + index].speed = 0;
+					break;
+				}
+
+				fifo_cnt += macs[i + index].fifo_cnt;
+			}
+		}
+	}
+
+	/* If more fifos than available were assigned, reduce the number of
+	 * fifos until within limit. Start with the lowest priority macs with 4
+	 * fifos.
+	 */
+	prio = 1;
+	cnt = 4;
+	while (fifo_cnt > get_num_fifos()) {
+		for (i = 0; i < get_num_output_macs(); i++) {
+			if (macs[i].prio == prio && macs[i].fifo_cnt == cnt) {
+				macs[i].fifo_cnt >>= 1;
+				fifo_cnt -= macs[i].fifo_cnt;
+			}
+
+			if (fifo_cnt <= get_num_fifos())
+				break;
+		}
+
+		if (prio >= 3) {
+			prio = 1;
+			cnt >>= 1;
+		} else {
+			prio++;
+		}
+
+		if (cnt == 0)
+			break;
+	}
+
+	/* Assign left over fifos to dpi */
+	if (get_num_fifos() - fifo_cnt > 0) {
+		if (get_num_fifos() - fifo_cnt >= 3) {
+			macs[1].fifo_cnt += 3;
+			fifo_cnt -= 3;
+		} else {
+			macs[1].fifo_cnt += 1;
+			fifo_cnt -= 1;
+		}
+	}
+
+	return 0;
+}
+
+static int setup_macs(int node)
+{
+	struct mac_info		macs[MAX_OUTPUT_MAC];
+	struct fifo_grp_info	fifo_grp[MAX_FIFO_GRP];
+	int			cnt;
+	int			fifo;
+	int			grp;
+	int			i;
+	u64			data;
+	int			size;
+
+	memset(macs, 0, sizeof(macs));
+	memset(fifo_grp, 0, sizeof(fifo_grp));
+
+	/* Get the number of fifos required by each mac */
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX)) {
+		get_78xx_fifos_required(node, macs);
+	} else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+		get_75xx_fifos_required(node, macs);
+	} else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) {
+		get_73xx_fifos_required(node, macs);
+	} else {
+		pr_err("octeon3-pko: Unsupported board type\n");
+		return -1;
+	}
+
+	/* Assign fifos to each mac. Start with macs requiring 4 fifos */
+	fifo = 0;
+	for (cnt = 4; cnt > 0; cnt >>= 1) {
+		for (i = 0; i < get_num_output_macs(); i++) {
+			if (macs[i].fifo_cnt != cnt)
+				continue;
+
+			macs[i].fifo = fifo;
+			grp = fifo / 4;
+
+			fifo_grp[grp].speed += macs[i].speed;
+
+			if (cnt == 4) {
+				/* 10, 0, 0, 0 */
+				fifo_grp[grp].size = 4;
+			} else if (cnt == 2) {
+				/* 5, 0, 5, 0 */
+				fifo_grp[grp].size = 3;
+			} else if (cnt == 1) {
+				if ((fifo & 0x2) && fifo_grp[grp].size == 3) {
+					/* 5, 0, 2.5, 2.5 */
+					fifo_grp[grp].size = 1;
+				} else {
+					/* 2.5, 2.5, 2.5, 2.5 */
+					fifo_grp[grp].size = 0;
+				}
+			}
+
+			fifo += cnt;
+		}
+	}
+
+	/* Configure the fifo groups */
+	for (i = 0; i < get_num_fifo_groups(); i++) {
+		data = oct_csr_read(PKO_PTGF_CFG(node, i));
+		size = data & GENMASK_ULL(2, 0);
+		if (size != fifo_grp[i].size)
+			data |= BIT(6);
+		data &= ~GENMASK_ULL(2, 0);
+		data |= fifo_grp[i].size;
+
+		data &= ~GENMASK_ULL(5, 3);
+		if (fifo_grp[i].speed >= 40) {
+			if (fifo_grp[i].size >= 3) {
+				/* 50 Gbps */
+				data |= 0x3 << 3;
+			} else {
+				/* 25 Gbps */
+				data |= 0x2 << 3;
+			}
+		} else if (fifo_grp[i].speed >= 20) {
+			/* 25 Gbps */
+			data |= 0x2 << 3;
+		} else if (fifo_grp[i].speed >= 10) {
+			/* 12.5 Gbps */
+			data |= 0x1 << 3;
+		}
+		oct_csr_write(data, PKO_PTGF_CFG(node, i));
+		data &= ~BIT(6);
+		oct_csr_write(data, PKO_PTGF_CFG(node, i));
+	}
+
+	/* Configure the macs with their assigned fifo */
+	for (i = 0; i < get_num_output_macs(); i++) {
+		data = oct_csr_read(PKO_MAC_CFG(node, i));
+		data &= ~GENMASK_ULL(4, 0);
+		if (!macs[i].fifo_cnt)
+			data |= 0x1f;
+		else
+			data |= macs[i].fifo;
+		oct_csr_write(data, PKO_MAC_CFG(node, i));
+	}
+
+	/* Setup mci0/mci1/skid credits */
+	for (i = 0; i < get_num_output_macs(); i++) {
+		int	fifo_credit;
+		int	mac_credit;
+		int	skid_credit;
+
+		if (!macs[i].fifo_cnt)
+			continue;
+
+		if (i == 0) {
+			/* Loopback */
+			mac_credit = 4 * 1024;
+			skid_credit = 0;
+		} else if (i == 1) {
+			/* Dpi */
+			mac_credit = 2 * 1024;
+			skid_credit = 0;
+		} else if (OCTEON_IS_MODEL(OCTEON_CN78XX) && ((i == 2 || i == 3))) {
+			/* ILK */
+			mac_credit = 4 * 1024;
+			skid_credit = 0;
+		} else if (OCTEON_IS_MODEL(OCTEON_CNF75XX) && ((i >= 6 && i <= 9))) {
+			/* Srio */
+			mac_credit = 1024 / 2;
+			skid_credit = 0;
+		} else {
+			/* Bgx */
+			mac_credit = macs[i].num_lmacs * 8 * 1024;
+			skid_credit = macs[i].num_lmacs * 256;
+		}
+
+		if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+			fifo_credit = macs[i].fifo_cnt * FIFO_SIZE;
+			data = (fifo_credit + mac_credit) / 16;
+			oct_csr_write(data, PKO_MCI0_MAX_CRED(node, i));
+		}
+
+		data = mac_credit / 16;
+		oct_csr_write(data, PKO_MCI1_MAX_CRED(node, i));
+
+		data = oct_csr_read(PKO_MAC_CFG(node, i));
+		data &= ~GENMASK_ULL(6, 5);
+		data |= ((skid_credit / 256) >> 1) << 5;
+		oct_csr_write(data, PKO_MAC_CFG(node, i));
+	}
+
+	return 0;
+}
+
+static int hw_init_global(int node, int aura)
+{
+	u64	data;
+	int	timeout;
+
+	data = oct_csr_read(PKO_ENABLE(node));
+	if (data & BIT(0)) {
+		pr_info("octeon3-pko: Pko already enabled on node %d\n", node);
+		return 0;
+	}
+
+	/* Enable color awareness */
+	data = oct_csr_read(PKO_SHAPER_CFG(node));
+	data |= BIT(1);
+	oct_csr_write(data, PKO_SHAPER_CFG(node));
+
+	/* Clear flush command */
+	oct_csr_write(0, PKO_DPFI_FLUSH(node));
+
+	/* Set the aura number */
+	data = (node << 10) | aura;
+	oct_csr_write(data, PKO_DPFI_FPA_AURA(node));
+
+	data = BIT(0);
+	oct_csr_write(data, PKO_DPFI_ENA(node));
+
+	/* Wait until all pointers have been returned */
+	timeout = 100000;
+	do {
+		data = oct_csr_read(PKO_STATUS(node));
+		if (data & BIT(63))
+			break;
+		udelay(1);
+		timeout--;
+	} while (timeout);
+	if (!timeout) {
+		pr_err("octeon3-pko: Pko dfpi failed on node %d\n", node);
+		return -1;
+	}
+
+	/* Set max outstanding requests in IOBP for any FIFO.*/
+	data = oct_csr_read(PKO_PTF_IOBP_CFG(node));
+	data &= ~GENMASK_ULL(6, 0);
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+		data |= 0x10;
+	else
+		data |= 3;
+	oct_csr_write(data, PKO_PTF_IOBP_CFG(node));
+
+	/* Set minimum packet size per Ethernet standard */
+	data = 0x3c << 3;
+	oct_csr_write(data, PKO_PDM_CFG(node));
+
+	/* Initialize macs and fifos */
+	setup_macs(node);
+
+	/* Enable pko */
+	data = BIT(0);
+	oct_csr_write(data, PKO_ENABLE(node));
+
+	/* Verify pko is ready */
+	data = oct_csr_read(PKO_STATUS(node));
+	if (!(data & BIT(63))) {
+		pr_err("octeon3_pko: pko is not ready\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int hw_exit_global(int node)
+{
+	u64	data;
+	int	timeout;
+	int	i;
+
+	/* Wait until there are no in-flight packets */
+	for (i = 0; i < get_num_fifos(); i++) {
+		data = oct_csr_read(PKO_PTF_STATUS(node, i));
+		if ((data & GENMASK_ULL(4, 0)) == 0x1f)
+			continue;
+
+		timeout = 10000;
+		do {
+			if (!(data & GENMASK_ULL(11, 5)))
+				break;
+			udelay(1);
+			timeout--;
+			data = oct_csr_read(PKO_PTF_STATUS(node, i));
+		} while (timeout);
+		if (!timeout) {
+			pr_err("octeon3-pko: Timeout in-flight fifo\n");
+			return -1;
+		}
+	}
+
+	/* Disable pko */
+	oct_csr_write(0, PKO_ENABLE(node));
+
+	/* Reset all port queues to the virtual mac */
+	for (i = 0; i < get_num_port_queues(); i++) {
+		data = get_num_output_macs() << 16;
+		oct_csr_write(data, PKO_L1_SQ_TOPOLOGY(node, i));
+
+		data = get_num_output_macs() << 13;
+		oct_csr_write(data, PKO_L1_SQ_SHAPE(node, i));
+
+		data = (u64)get_num_output_macs() << 48;
+		oct_csr_write(data, PKO_L1_SQ_LINK(node, i));
+	}
+
+	/* Reset all output macs */
+	for (i = 0; i < get_num_output_macs(); i++) {
+		data = 0x1f;
+		oct_csr_write(data, PKO_MAC_CFG(node, i));
+	}
+
+	/* Reset all fifo groups */
+	for (i = 0; i < get_num_fifo_groups(); i++) {
+		data = oct_csr_read(PKO_PTGF_CFG(node, i));
+		/* Simulator asserts if an unused group is reset */
+		if (data == 0)
+			continue;
+		data = BIT(6);
+		oct_csr_write(data, PKO_PTGF_CFG(node, i));
+	}
+
+	/* Return cache pointers to fpa */
+	data = BIT(0);
+	oct_csr_write(data, PKO_DPFI_FLUSH(node));
+	timeout = 10000;
+	do {
+		data = oct_csr_read(PKO_DPFI_STATUS(node));
+		if (data & BIT(0))
+			break;
+		udelay(1);
+		timeout--;
+	} while (timeout);
+	if (!timeout) {
+		pr_err("octeon3-pko: Timeout flushing cache\n");
+		return -1;
+	}
+	oct_csr_write(0, PKO_DPFI_ENA(node));
+	oct_csr_write(0, PKO_DPFI_FLUSH(node));
+
+	return 0;
+}
+
+static int virtual_mac_config(int node)
+{
+	int			vmac;
+	int			pq;
+	int			dq[8];
+	int			num_dq;
+	int			parent_q;
+	enum queue_level	level;
+	int			queue;
+	int			i;
+	int			rc;
+
+	/* The virtual mac is after the last output mac. Note: for the 73xx it
+	 * might be 2 after the last output mac (15).
+	 */
+	vmac = get_num_output_macs();
+
+	/* Allocate a port queue */
+	rc = allocate_queues(node, PQ, 1, &pq);
+	if (rc < 0) {
+		pr_err("octeon3-pko: Failed to allocate port queue\n");
+		return rc;
+	}
+
+	/* Connect the port queue to the output mac */
+	port_queue_init(node, pq, vmac);
+
+	parent_q = pq;
+	for (level = L2_SQ; level <= max_sq_level(); level++) {
+		rc = allocate_queues(node, level, 1, &queue);
+		if (rc < 0) {
+			pr_err("octeon3-pko: Failed to allocate queue\n");
+			return rc;
+		}
+
+		switch (level) {
+		case L2_SQ:
+			scheduler_queue_l2_init(node, queue, parent_q);
+			break;
+		case L3_SQ:
+			scheduler_queue_l3_init(node, queue, parent_q);
+			break;
+		case L4_SQ:
+			scheduler_queue_l4_init(node, queue, parent_q);
+			break;
+		case L5_SQ:
+			scheduler_queue_l5_init(node, queue, parent_q);
+			break;
+		default:
+			break;
+		}
+
+		parent_q = queue;
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_0))
+		num_dq = 8;
+	else
+		num_dq = 1;
+
+	rc = allocate_queues(node, DQ, num_dq, dq);
+	if (rc < 0) {
+		pr_err("octeon3-pko: Failed to allocate description queues\n");
+		return rc;
+	}
+
+	/* By convention the dq must be zero */
+	if (dq[0] != 0) {
+		pr_err("octeon3-pko: Failed to reserve description queues\n");
+		return -1;
+	}
+	descriptor_queue_init(node, dq, parent_q, num_dq);
+
+	/* Open the dqs */
+	for (i = 0; i < num_dq; i++)
+		open_dq(node, dq[i]);
+
+	return 0;
+}
+
+static int drain_dq(int node, int dq)
+{
+	u64	data;
+	int	timeout;
+	s64	rc;
+
+	data = BIT(2) | BIT(1);
+	oct_csr_write(data, PKO_DQ_SW_XOFF(node, dq));
+
+	usleep_range(1000, 2000);
+
+	data = 0;
+	oct_csr_write(data, PKO_DQ_SW_XOFF(node, dq));
+
+	/* Wait for the dq to drain */
+	timeout = 10000;
+	do {
+		rc = query_dq(node, dq);
+		if (!rc)
+			break;
+		else if (rc < 0)
+			return rc;
+		udelay(1);
+		timeout--;
+	} while (timeout);
+	if (!timeout) {
+		pr_err("octeon3-pko: Timeout waiting for dq to drain\n");
+		return -1;
+	}
+
+	/* Close the queue anf free internal buffers */
+	close_dq(node, dq);
+
+	return 0;
+}
+
+int octeon3_pko_exit_global(int node)
+{
+	int	dq[8];
+	int	num_dq;
+	int	i;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_0))
+		num_dq = 8;
+	else
+		num_dq = 1;
+
+	/* Shutdown the virtual/null interface */
+	for (i = 0; i < ARRAY_SIZE(dq); i++)
+		dq[i] = i;
+	octeon3_pko_interface_uninit(node, dq, num_dq);
+
+	/* Shutdown pko */
+	hw_exit_global(node);
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pko_exit_global);
+
+int octeon3_pko_init_global(int node, int aura)
+{
+	int	rc;
+
+	rc = hw_init_global(node, aura);
+	if (rc)
+		return rc;
+
+	/* Channel credit level at level 2 */
+	oct_csr_write(0, PKO_CHANNEL_LEVEL(node));
+
+	/* Configure the null mac */
+	rc = virtual_mac_config(node);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pko_init_global);
+
+int octeon3_pko_set_mac_options(int			node,
+				int			interface,
+				int			index,
+				enum octeon3_mac_type	mac_type,
+				bool			fcs_en,
+				bool			pad_en,
+				int			fcs_sop_off)
+{
+	int	mac;
+	u64	data;
+	int	fifo_num;
+
+	mac = get_output_mac(interface, index, mac_type);
+
+	data = oct_csr_read(PKO_MAC_CFG(node, mac));
+	fifo_num = data & GENMASK_ULL(4, 0);
+	if (fifo_num == 0x1f) {
+		pr_err("octeon3_pko: mac not configured %d:%d:%d\n", node, interface, index);
+		return -ENODEV;
+	}
+
+	/* Some silicon requires fifo_num=0x1f to change padding, fcs */
+	data &= ~GENMASK_ULL(4, 0);
+	data |= 0x1f;
+
+	data &= ~(BIT(16) | BIT(15) | GENMASK_ULL(14, 7));
+	if (pad_en)
+		data |= BIT(16);
+	if (fcs_en)
+		data |= BIT(15);
+	if (fcs_sop_off)
+		data |= fcs_sop_off << 7;
+
+	oct_csr_write(data, PKO_MAC_CFG(node, mac));
+
+	data &= ~GENMASK_ULL(4, 0);
+	data |= fifo_num;
+	oct_csr_write(data, PKO_MAC_CFG(node, mac));
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pko_set_mac_options);
+
+int octeon3_pko_get_fifo_size(int			node,
+			      int			interface,
+			      int			index,
+			      enum octeon3_mac_type	mac_type)
+{
+	int	mac;
+	u64	data;
+	int	fifo_grp;
+	int	fifo_off;
+	int	size;
+
+	/* Set fifo size to 2.4 KB */
+	size = FIFO_SIZE;
+
+	mac = get_output_mac(interface, index, mac_type);
+
+	data = oct_csr_read(PKO_MAC_CFG(node, mac));
+	if ((data & GENMASK_ULL(4, 0)) == 0x1f) {
+		pr_err("octeon3_pko: mac not configured %d:%d:%d\n", node, interface, index);
+		return -ENODEV;
+	}
+	fifo_grp = (data & GENMASK_ULL(4, 0)) >> 2;
+	fifo_off = data & GENMASK_ULL(1, 0);
+
+	data = oct_csr_read(PKO_PTGF_CFG(node, fifo_grp));
+	data &= GENMASK_ULL(2, 0);
+	switch (data) {
+	case 0:
+		/* 2.5l, 2.5k, 2.5k, 2.5k */
+		break;
+	case 1:
+		/* 5.0k, 0.0k, 2.5k, 2.5k */
+		if (fifo_off == 0)
+			size *= 2;
+		if (fifo_off == 1)
+			size = 0;
+		break;
+	case 2:
+		/* 2.5k, 2.5k, 5.0k, 0.0k */
+		if (fifo_off == 2)
+			size *= 2;
+		if (fifo_off == 3)
+			size = 0;
+		break;
+	case 3:
+		/* 5k, 0, 5k, 0 */
+		if ((fifo_off & 1) != 0)
+			size = 0;
+		size *= 2;
+		break;
+	case 4:
+		/* 10k, 0, 0, 0 */
+		if (fifo_off != 0)
+			size = 0;
+		size *= 4;
+		break;
+	default:
+		size = -1;
+	}
+
+	return size;
+}
+EXPORT_SYMBOL(octeon3_pko_get_fifo_size);
+
+int octeon3_pko_activate_dq(int node, int dq, int cnt)
+{
+	int	i;
+	int	rc = 0;
+	u64	data;
+
+	for (i = 0; i < cnt; i++) {
+		rc = open_dq(node, dq + i);
+		if (rc)
+			break;
+
+		data = oct_csr_read(PKO_PDM_DQ_MINPAD(node, dq + i));
+		data &= ~BIT(0);
+		oct_csr_write(data, PKO_PDM_DQ_MINPAD(node, dq + i));
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL(octeon3_pko_activate_dq);
+
+int octeon3_pko_interface_init(int			node,
+			       int			interface,
+			       int			index,
+			       enum octeon3_mac_type	mac_type,
+			       int			ipd_port)
+{
+	int			mac;
+	int			pq;
+	int			parent_q;
+	int			queue;
+	enum queue_level	level;
+	int			rc;
+
+	mac = get_output_mac(interface, index, mac_type);
+
+	/* Allocate a port queue for this interface */
+	rc = allocate_queues(node, PQ, 1, &pq);
+	if (rc < 0) {
+		pr_err("octeon3-pko: Failed to allocate port queue\n");
+		return rc;
+	}
+
+	/* Connect the port queue to the output mac */
+	port_queue_init(node, pq, mac);
+
+	/* Link scheduler queues to the port queue */
+	parent_q = pq;
+	for (level = L2_SQ; level <= max_sq_level(); level++) {
+		rc = allocate_queues(node, level, 1, &queue);
+		if (rc < 0) {
+			pr_err("octeon3-pko: Failed to allocate queue\n");
+			return rc;
+		}
+
+		switch (level) {
+		case L2_SQ:
+			scheduler_queue_l2_init(node, queue, parent_q);
+			map_channel(node, pq, queue, ipd_port);
+			break;
+		case L3_SQ:
+			scheduler_queue_l3_init(node, queue, parent_q);
+			break;
+		case L4_SQ:
+			scheduler_queue_l4_init(node, queue, parent_q);
+			break;
+		case L5_SQ:
+			scheduler_queue_l5_init(node, queue, parent_q);
+			break;
+		default:
+			break;
+		}
+
+		parent_q = queue;
+	}
+
+	/* Link the descriptor queue */
+	rc = allocate_queues(node, DQ, 1, &queue);
+	if (rc < 0) {
+		pr_err("octeon3-pko: Failed to allocate descriptor queue\n");
+		return rc;
+	}
+	descriptor_queue_init(node, &queue, parent_q, 1);
+
+	return queue;
+}
+EXPORT_SYMBOL(octeon3_pko_interface_init);
+
+int octeon3_pko_interface_uninit(int		node,
+				 const int	*dq,
+				 int		num_dq)
+{
+	enum queue_level	level;
+	int			queue;
+	int			parent_q;
+	u64			data;
+	u64			addr;
+	int			i;
+	int			rc;
+
+	/* Drain all dqs */
+	for (i = 0; i < num_dq; i++) {
+		rc = drain_dq(node, dq[i]);
+		if (rc)
+			return rc;
+
+		/* Free the dq */
+		data = oct_csr_read(PKO_DQ_TOPOLOGY(node, dq[i]));
+		parent_q = (data & GENMASK_ULL(25, 16)) >> 16;
+		free_queues(node, DQ, 1, &dq[i]);
+
+		/* Free all the scheduler queues */
+		queue = parent_q;
+		for (level = max_sq_level(); (signed int)level >= PQ; level--) {
+			switch (level) {
+			case L5_SQ:
+				addr = PKO_L5_SQ_TOPOLOGY(node, queue);
+				data = oct_csr_read(addr);
+				parent_q = (data & GENMASK_ULL(25, 16)) >> 16;
+				break;
+
+			case L4_SQ:
+				addr = PKO_L4_SQ_TOPOLOGY(node, queue);
+				data = oct_csr_read(addr);
+				parent_q = (data & GENMASK_ULL(24, 16)) >> 16;
+				break;
+
+			case L3_SQ:
+				addr = PKO_L3_SQ_TOPOLOGY(node, queue);
+				data = oct_csr_read(addr);
+				parent_q = (data & GENMASK_ULL(24, 16)) >> 16;
+				break;
+
+			case L2_SQ:
+				addr = PKO_L2_SQ_TOPOLOGY(node, queue);
+				data = oct_csr_read(addr);
+				parent_q = (data & GENMASK_ULL(20, 16)) >> 16;
+				break;
+
+			case PQ:
+				break;
+
+			default:
+				pr_err("octeon3-pko: Invalid level=%d\n",
+				       level);
+				return -1;
+			}
+
+			free_queues(node, level, 1, &queue);
+			queue = parent_q;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(octeon3_pko_interface_uninit);
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-sso.c b/drivers/net/ethernet/cavium/octeon/octeon3-sso.c
new file mode 100644
index 000000000000..62a5bb5a07b7
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-sso.c
@@ -0,0 +1,309 @@ 
+/*
+ * Copyright (c) 2017 Cavium, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+/* Registers are accessed via xkphys */
+#define SSO_BASE			0x1670000000000ull
+#define SSO_ADDR(node)			(SET_XKPHYS + NODE_OFFSET(node) +      \
+					 SSO_BASE)
+
+#define SSO_AW_STATUS(n)		(SSO_ADDR(n)		   + 0x000010e0)
+#define SSO_AW_CFG(n)			(SSO_ADDR(n)		   + 0x000010f0)
+#define SSO_ERR0(n)			(SSO_ADDR(n)		   + 0x00001240)
+#define SSO_TAQ_ADD(n)			(SSO_ADDR(n)		   + 0x000020e0)
+#define SSO_XAQ_AURA(n)			(SSO_ADDR(n)		   + 0x00002100)
+
+#define AQ_OFFSET(g)			((g) << 3)
+#define AQ_ADDR(n, g)			(SSO_ADDR(n) + AQ_OFFSET(g))
+#define SSO_XAQ_HEAD_PTR(n, g)		(AQ_ADDR(n, g)		   + 0x00080000)
+#define SSO_XAQ_TAIL_PTR(n, g)		(AQ_ADDR(n, g)		   + 0x00090000)
+#define SSO_XAQ_HEAD_NEXT(n, g)		(AQ_ADDR(n, g)		   + 0x000a0000)
+#define SSO_XAQ_TAIL_NEXT(n, g)		(AQ_ADDR(n, g)		   + 0x000b0000)
+
+#define GRP_OFFSET(grp)			((grp) << 16)
+#define GRP_ADDR(n, g)			(SSO_ADDR(n) + GRP_OFFSET(g))
+#define SSO_GRP_TAQ_THR(n, g)		(GRP_ADDR(n, g)		   + 0x20000100)
+#define SSO_GRP_PRI(n, g)		(GRP_ADDR(n, g)		   + 0x20000200)
+#define SSO_GRP_INT(n, g)		(GRP_ADDR(n, g)		   + 0x20000400)
+#define SSO_GRP_INT_THR(n, g)		(GRP_ADDR(n, g)		   + 0x20000500)
+#define SSO_GRP_AQ_CNT(n, g)		(GRP_ADDR(n, g)		   + 0x20000700)
+
+static int get_num_sso_grps(void)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+		return 256;
+	if (OCTEON_IS_MODEL(OCTEON_CNF75XX) || OCTEON_IS_MODEL(OCTEON_CN73XX))
+		return 64;
+	return 0;
+}
+
+void octeon3_sso_irq_set(int node, int grp, bool en)
+{
+	if (en)
+		oct_csr_write(1, SSO_GRP_INT_THR(node, grp));
+	else
+		oct_csr_write(0, SSO_GRP_INT_THR(node, grp));
+
+	oct_csr_write(BIT(1), SSO_GRP_INT(node, grp));
+}
+EXPORT_SYMBOL(octeon3_sso_irq_set);
+
+/**
+ * octeon3_sso_alloc_grp_range - Allocate a range of sso groups.
+ * @node: Node where sso resides.
+ * @req_grp: Group number to start allocating sequentially from. -1 for don't
+ *	     care.
+ * @req_cnt: Number of groups to allocate.
+ * @use_last_avail: Set to request the last available groups.
+ * @grp: Updated with allocated groups.
+ *
+ * Returns 0 if successful.
+ * Returns <0 for error codes.
+ */
+int octeon3_sso_alloc_grp_range(int	node,
+				int	req_grp,
+				int	req_cnt,
+				bool	use_last_avail,
+				int	*grp)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+
+	/* Allocate the request group range */
+	strncpy((char *)&tag.lo, "cvm_sso_", 8);
+	snprintf(buf, 16, "0%d......", node);
+	memcpy(&tag.hi, buf, 8);
+
+	res_mgr_create_resource(tag, get_num_sso_grps());
+	return res_mgr_alloc_range(tag, req_grp, req_cnt, false, grp);
+}
+EXPORT_SYMBOL(octeon3_sso_alloc_grp_range);
+
+/**
+ * octeon3_sso_alloc_grp - Allocate a sso group.
+ * @node: Node where sso resides.
+ * @req_grp: Group number to allocate, -1 for don't care.
+ *
+ * Returns allocated group.
+ * Returns <0 for error codes.
+ */
+int octeon3_sso_alloc_grp(int node, int req_grp)
+{
+	int	grp;
+	int	rc;
+
+	rc = octeon3_sso_alloc_grp_range(node, req_grp, 1, false, &grp);
+	if (!rc)
+		rc = grp;
+
+	return rc;
+}
+EXPORT_SYMBOL(octeon3_sso_alloc_grp);
+
+/**
+ * octeon3_sso_free_grp_range - Free a range of sso groups.
+ * @node: Node where sso resides.
+ * @grp: Array of groups to free.
+ * @req_cnt: Number of groups to free.
+ */
+void octeon3_sso_free_grp_range(int	node,
+				int	*grp,
+				int	req_cnt)
+{
+	struct global_resource_tag	tag;
+	char				buf[16];
+
+	/* Allocate the request group range */
+	strncpy((char *)&tag.lo, "cvm_sso_", 8);
+	snprintf(buf, 16, "0%d......", node);
+	memcpy(&tag.hi, buf, 8);
+
+	res_mgr_free_range(tag, grp, req_cnt);
+}
+EXPORT_SYMBOL(octeon3_sso_free_grp_range);
+
+/**
+ * octeon3_sso_free_grp - Free a sso group.
+ * @node: Node where sso resides.
+ * @grp: Group to free.
+ */
+void octeon3_sso_free_grp(int	node,
+			  int	grp)
+{
+	octeon3_sso_free_grp_range(node, &grp, 1);
+}
+EXPORT_SYMBOL(octeon3_sso_free_grp);
+
+/**
+ * octeon3_sso_pass1_limit - Near full TAQ can cause hang. When the TAQ
+ *			     (Transitory Admission Queue) is near-full, it is
+ *			     possible for SSO to hang.
+ *			     Workaround: Ensure that the sum of
+ *			     SSO_GRP(0..255)_TAQ_THR[MAX_THR] of all used
+ *			     groups is <= 1264. This may reduce single-group
+ *			     performance when many groups are used.
+ *
+ * @node: Node to update.
+ * @grp: SSO group to update.
+ */
+void octeon3_sso_pass1_limit(int node, int grp)
+{
+	u64	taq_thr;
+	u64	taq_add;
+	u64	max_thr;
+	u64	rsvd_thr;
+
+	/* Ideally, we would like to divide the maximum number of TAQ buffers
+	 * (1264) among the sso groups in use. However, since we don't know how
+	 * many sso groups are used by code outside this driver we take the
+	 * worst case approach and assume all 256 sso groups must be supported.
+	 */
+	max_thr = 1264 / get_num_sso_grps();
+	if (max_thr < 4)
+		max_thr = 4;
+	rsvd_thr = max_thr - 1;
+
+	/* Changes to SSO_GRP_TAQ_THR[rsvd_thr] must also update
+	 * SSO_TAQ_ADD[RSVD_FREE].
+	 */
+	taq_thr = oct_csr_read(SSO_GRP_TAQ_THR(node, grp));
+	taq_add = (rsvd_thr - (taq_thr & GENMASK_ULL(10, 0))) << 16;
+
+	taq_thr &= ~(GENMASK_ULL(42, 32) | GENMASK_ULL(10, 0));
+	taq_thr |= max_thr << 32;
+	taq_thr |= rsvd_thr;
+
+	oct_csr_write(taq_thr, SSO_GRP_TAQ_THR(node, grp));
+	oct_csr_write(taq_add, SSO_TAQ_ADD(node));
+}
+EXPORT_SYMBOL(octeon3_sso_pass1_limit);
+
+/**
+ * octeon3_sso_shutdown - Shutdown the sso. It undoes what octeon3_sso_init()
+ *			  did.
+ * @node: Node where sso to disable is.
+ * @aura: Aura used for the sso buffers.
+ */
+void octeon3_sso_shutdown(int node, int aura)
+{
+	u64	data;
+	int	max_grps;
+	int	timeout;
+	int	i;
+
+	/* Disable sso */
+	data = oct_csr_read(SSO_AW_CFG(node));
+	data |= BIT(6) | BIT(4);
+	data &= ~BIT(0);
+	oct_csr_write(data, SSO_AW_CFG(node));
+
+	/* Extract the fpa buffers */
+	max_grps = get_num_sso_grps();
+	for (i = 0; i < max_grps; i++) {
+		u64	head;
+		u64	tail;
+		void	*ptr;
+
+		head = oct_csr_read(SSO_XAQ_HEAD_PTR(node, i));
+		tail = oct_csr_read(SSO_XAQ_TAIL_PTR(node, i));
+		data = oct_csr_read(SSO_GRP_AQ_CNT(node, i));
+
+		/* Verify pointers */
+		head &= GENMASK_ULL(41, 7);
+		tail &= GENMASK_ULL(41, 7);
+		if (head != tail) {
+			pr_err("octeon3_sso: bad ptr\n");
+			continue;
+		}
+
+		/* This sso group should have no pending entries */
+		if (data & GENMASK_ULL(32, 0))
+			pr_err("octeon3_sso: not empty\n");
+
+		ptr = phys_to_virt(head);
+		octeon_fpa3_free(node, aura, ptr);
+
+		/* Clear pointers */
+		oct_csr_write(0, SSO_XAQ_HEAD_PTR(node, i));
+		oct_csr_write(0, SSO_XAQ_HEAD_NEXT(node, i));
+		oct_csr_write(0, SSO_XAQ_TAIL_PTR(node, i));
+		oct_csr_write(0, SSO_XAQ_TAIL_NEXT(node, i));
+	}
+
+	/* Make sure all buffers drained */
+	timeout = 10000;
+	do {
+		data = oct_csr_read(SSO_AW_STATUS(node));
+		if ((data & GENMASK_ULL(5, 0)) == 0)
+			break;
+		timeout--;
+		udelay(1);
+	} while (timeout);
+	if (!timeout)
+		pr_err("octeon3_sso: timeout\n");
+}
+EXPORT_SYMBOL(octeon3_sso_shutdown);
+
+/**
+ * octeon3_sso_init - Initialize the sso.
+ * @node: Node where sso resides.
+ * @aura: Aura used for the sso buffers.
+ */
+int octeon3_sso_init(int node, int aura)
+{
+	u64	data;
+	int	max_grps;
+	int	i;
+	int	rc = 0;
+
+	data = BIT(3) | BIT(2) | BIT(1);
+	oct_csr_write(data, SSO_AW_CFG(node));
+
+	data = (node << 10) | aura;
+	oct_csr_write(data, SSO_XAQ_AURA(node));
+
+	max_grps = get_num_sso_grps();
+	for (i = 0; i < max_grps; i++) {
+		u64	phys;
+		void	*mem;
+
+		mem = octeon_fpa3_alloc(node, aura);
+		if (!mem) {
+			rc = -ENOMEM;
+			goto err;
+		}
+
+		phys = virt_to_phys(mem);
+		oct_csr_write(phys, SSO_XAQ_HEAD_PTR(node, i));
+		oct_csr_write(phys, SSO_XAQ_HEAD_NEXT(node, i));
+		oct_csr_write(phys, SSO_XAQ_TAIL_PTR(node, i));
+		oct_csr_write(phys, SSO_XAQ_TAIL_NEXT(node, i));
+
+		/* SSO-18678 */
+		data = 0x3f << 16;
+		oct_csr_write(data, SSO_GRP_PRI(node, i));
+	}
+
+	data = BIT(0);
+	oct_csr_write(data, SSO_ERR0(node));
+
+	data = BIT(3) | BIT(2) | BIT(1) | BIT(0);
+	oct_csr_write(data, SSO_AW_CFG(node));
+
+ err:
+	return rc;
+}
+EXPORT_SYMBOL(octeon3_sso_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>");
+MODULE_DESCRIPTION("Cavium, Inc. SSO management.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3.h b/drivers/net/ethernet/cavium/octeon/octeon3.h
new file mode 100644
index 000000000000..b84a2515b0a0
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3.h
@@ -0,0 +1,411 @@ 
+/*
+ * Copyright (c) 2017 Cavium, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _OCTEON3_H_
+#define _OCTEON3_H_
+
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+
+#define MAX_NODES			2
+#define NODE_MASK			(MAX_NODES - 1)
+#define MAX_BGX_PER_NODE		6
+#define MAX_LMAC_PER_BGX		4
+
+#define IOBDMA_ORDERED_IO_ADDR		0xffffffffffffa200ull
+#define LMTDMA_ORDERED_IO_ADDR		0xffffffffffffa400ull
+
+#define SCRATCH_BASE			0xffffffffffff8000ull
+#define PKO_LMTLINE			2ull
+#define LMTDMA_SCR_OFFSET		(PKO_LMTLINE * CVMX_CACHE_LINE_SIZE)
+
+/* Pko sub-command three bit codes (SUBDC3) */
+#define PKO_SENDSUBDC_GATHER		0x1
+
+/* Pko sub-command four bit codes (SUBDC4) */
+#define PKO_SENDSUBDC_TSO		0x8
+#define PKO_SENDSUBDC_FREE		0x9
+#define PKO_SENDSUBDC_WORK		0xa
+#define PKO_SENDSUBDC_MEM		0xc
+#define PKO_SENDSUBDC_EXT		0xd
+
+#define BGX_RX_FIFO_SIZE		(64 * 1024)
+#define BGX_TX_FIFO_SIZE		(32 * 1024)
+
+/* Registers are accessed via xkphys */
+#define SET_XKPHYS			BIT_ULL(63)
+#define NODE_OFFSET(node)		((node) * 0x1000000000ull)
+
+/* Bgx register definitions */
+#define BGX_BASE			0x11800e0000000ull
+#define BGX_OFFSET(bgx)			(BGX_BASE + ((bgx) << 24))
+#define INDEX_OFFSET(index)		((index) << 20)
+#define INDEX_ADDR(n, b, i)		(SET_XKPHYS + NODE_OFFSET(n) +	       \
+					 BGX_OFFSET(b) + INDEX_OFFSET(i))
+#define CAM_OFFSET(mac)			((mac) << 3)
+#define CAM_ADDR(n, b, m)		(INDEX_ADDR(n, b, 0) + CAM_OFFSET(m))
+
+#define BGX_CMR_CONFIG(n, b, i)		(INDEX_ADDR(n, b, i)	      + 0x00000)
+#define BGX_CMR_GLOBAL_CONFIG(n, b)	(INDEX_ADDR(n, b, 0)	      + 0x00008)
+#define BGX_CMR_RX_ID_MAP(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x00028)
+#define BGX_CMR_RX_BP_ON(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x00088)
+#define BGX_CMR_RX_ADR_CTL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x000a0)
+#define BGX_CMR_RX_FIFO_LEN(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x000c0)
+#define BGX_CMR_RX_ADRX_CAM(n, b, m)	(CAM_ADDR(n, b, m)	      + 0x00100)
+#define BGX_CMR_CHAN_MSK_AND(n, b)	(INDEX_ADDR(n, b, 0)	      + 0x00200)
+#define BGX_CMR_CHAN_MSK_OR(n, b)	(INDEX_ADDR(n, b, 0)	      + 0x00208)
+#define BGX_CMR_TX_FIFO_LEN(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x00418)
+#define BGX_CMR_TX_LMACS(n, b)		(INDEX_ADDR(n, b, 0)	      + 0x01000)
+
+#define BGX_SPU_CONTROL1(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10000)
+#define BGX_SPU_STATUS1(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10008)
+#define BGX_SPU_STATUS2(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10020)
+#define BGX_SPU_BX_STATUS(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10028)
+#define BGX_SPU_BR_STATUS1(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10030)
+#define BGX_SPU_BR_STATUS2(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10038)
+#define BGX_SPU_BR_BIP_ERR_CNT(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10058)
+#define BGX_SPU_BR_PMD_CONTROL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10068)
+#define BGX_SPU_BR_PMD_LP_CUP(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10078)
+#define BGX_SPU_BR_PMD_LD_CUP(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10088)
+#define BGX_SPU_BR_PMD_LD_REP(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10090)
+#define BGX_SPU_FEC_CONTROL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x100a0)
+#define BGX_SPU_AN_CONTROL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x100c8)
+#define BGX_SPU_AN_STATUS(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x100d0)
+#define BGX_SPU_AN_ADV(n, b, i)		(INDEX_ADDR(n, b, i)	      + 0x100d8)
+#define BGX_SPU_MISC_CONTROL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x10218)
+#define BGX_SPU_INT(n, b, i)		(INDEX_ADDR(n, b, i)	      + 0x10220)
+#define BGX_SPU_DBG_CONTROL(n, b)	(INDEX_ADDR(n, b, 0)	      + 0x10300)
+
+#define BGX_SMU_RX_INT(n, b, i)		(INDEX_ADDR(n, b, i)	      + 0x20000)
+#define BGX_SMU_RX_FRM_CTL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x20008)
+#define BGX_SMU_RX_JABBER(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x20018)
+#define BGX_SMU_RX_CTL(n, b, i)		(INDEX_ADDR(n, b, i)	      + 0x20030)
+#define BGX_SMU_TX_APPEND(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x20100)
+#define BGX_SMU_TX_MIN_PKT(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x20118)
+#define BGX_SMU_TX_INT(n, b, i)		(INDEX_ADDR(n, b, i)	      + 0x20140)
+#define BGX_SMU_TX_CTL(n, b, i)		(INDEX_ADDR(n, b, i)	      + 0x20160)
+#define BGX_SMU_TX_THRESH(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x20168)
+#define BGX_SMU_CTRL(n, b, i)		(INDEX_ADDR(n, b, i)	      + 0x20200)
+
+#define BGX_GMP_PCS_MR_CONTROL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x30000)
+#define BGX_GMP_PCS_MR_STATUS(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x30008)
+#define BGX_GMP_PCS_AN_ADV(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x30010)
+#define BGX_GMP_PCS_LINK_TIMER(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x30040)
+#define BGX_GMP_PCS_SGM_AN_ADV(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x30068)
+#define BGX_GMP_PCS_MISC_CTL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x30078)
+#define BGX_GMP_GMI_PRT_CFG(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x38010)
+#define BGX_GMP_GMI_RX_FRM_CTL(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x38018)
+#define BGX_GMP_GMI_RX_JABBER(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x38038)
+#define BGX_GMP_GMI_TX_THRESH(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x38210)
+#define BGX_GMP_GMI_TX_APPEND(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x38218)
+#define BGX_GMP_GMI_TX_SLOT(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x38220)
+#define BGX_GMP_GMI_TX_BURST(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x38228)
+#define BGX_GMP_GMI_TX_MIN_PKT(n, b, i)	(INDEX_ADDR(n, b, i)	      + 0x38240)
+#define BGX_GMP_GMI_TX_SGMII_CTL(n, b, i) (INDEX_ADDR(n, b, i)	      + 0x38300)
+
+/* XCV register definitions */
+#define XCV_BASE			0x11800db000000ull
+#define SET_XCV_BASE(node)		(SET_XKPHYS + NODE_OFFSET(node) +      \
+					 XCV_BASE)
+#define XCV_RESET(node)			(SET_XCV_BASE(node)	       + 0x0000)
+#define XCV_DLL_CTL(node)		(SET_XCV_BASE(node)	       + 0x0010)
+#define XCV_COMP_CTL(node)		(SET_XCV_BASE(node)	       + 0x0020)
+#define XCV_CTL(node)			(SET_XCV_BASE(node)	       + 0x0030)
+#define XCV_INT(node)			(SET_XCV_BASE(node)	       + 0x0040)
+#define XCV_INBND_STATUS(node)		(SET_XCV_BASE(node)	       + 0x0080)
+#define XCV_BATCH_CRD_RET(node)		(SET_XCV_BASE(node)	       + 0x0100)
+
+/* Gser register definitions */
+#define GSER_BASE			0x1180090000000ull
+#define GSER_OFFSET(gser)		(GSER_BASE + ((gser) << 24))
+#define GSER_LANE_OFFSET(lane)		((lane) << 20)
+#define GSER_LANE_ADDR(n, g, l)		(SET_XKPHYS + NODE_OFFSET(n) +	       \
+					 GSER_OFFSET(g) + GSER_LANE_OFFSET(l))
+#define GSER_PHY_CTL(n, g)		(GSER_LANE_ADDR(n, g, 0)     + 0x000000)
+#define GSER_CFG(n, g)			(GSER_LANE_ADDR(n, g, 0)     + 0x000080)
+#define GSER_LANE_MODE(n, g)		(GSER_LANE_ADDR(n, g, 0)     + 0x000118)
+#define GSER_RX_EIE_DETSTS(n, g)	(GSER_LANE_ADDR(n, g, 0)     + 0x000150)
+#define GSER_LANE_LBERT_CFG(n, g, l)	(GSER_LANE_ADDR(n, g, l)     + 0x4c0020)
+#define GSER_LANE_PCS_CTLIFC_0(n, g, l)	(GSER_LANE_ADDR(n, g, l)     + 0x4c0060)
+#define GSER_LANE_PCS_CTLIFC_2(n, g, l)	(GSER_LANE_ADDR(n, g, l)     + 0x4c0070)
+
+/* Odd gser registers */
+#define GSER_LANE_OFFSET_1(lane)	((lane) << 7)
+#define GSER_LANE_ADDR_1(n, g, l)	(SET_XKPHYS + NODE_OFFSET(n) +	       \
+					 GSER_OFFSET(g) + GSER_LANE_OFFSET_1(l))
+
+#define GSER_BR_RX_CTL(n, g, l)		(GSER_LANE_ADDR_1(n, g, l)   + 0x000400)
+#define GSER_BR_RX_EER(n, g, l)		(GSER_LANE_ADDR_1(n, g, l)   + 0x000418)
+
+#define GSER_LANE_OFFSET_2(mode)	((mode) << 5)
+#define GSER_LANE_ADDR_2(n, g, m)	(SET_XKPHYS + NODE_OFFSET(n) +	       \
+					 GSER_OFFSET(g) + GSER_LANE_OFFSET_2(m))
+
+#define GSER_LANE_P_MODE_1(n, g, m)	(GSER_LANE_ADDR_2(n, g, m)   + 0x4e0048)
+
+#define DPI_BASE			0x1df0000000000ull
+#define DPI_ADDR(n)			(SET_XKPHYS + NODE_OFFSET(n) + DPI_BASE)
+#define DPI_CTL(n)			(DPI_ADDR(n)                  + 0x00040)
+
+enum octeon3_mac_type {
+	BGX_MAC,
+	SRIO_MAC
+};
+
+enum octeon3_src_type {
+	QLM,
+	XCV
+};
+
+struct mac_platform_data {
+	enum octeon3_mac_type	mac_type;
+	int			numa_node;
+	int			interface;
+	int			port;
+	enum octeon3_src_type	src_type;
+};
+
+struct bgx_port_netdev_priv {
+	struct bgx_port_priv *bgx_priv;
+};
+
+/* Remove this define to use these enums after the last cvmx code references are
+ * gone.
+ */
+/* PKO_MEMDSZ_E */
+enum pko_memdsz_e {
+	MEMDSZ_B64 = 0,
+	MEMDSZ_B32 = 1,
+	MEMDSZ_B16 = 2,
+	MEMDSZ_B8 = 3
+};
+
+/* PKO_MEMALG_E */
+enum pko_memalg_e {
+	MEMALG_SET = 0,
+	MEMALG_SETTSTMP = 1,
+	MEMALG_SETRSLT = 2,
+	MEMALG_ADD = 8,
+	MEMALG_SUB = 9,
+	MEMALG_ADDLEN = 0xA,
+	MEMALG_SUBLEN = 0xB,
+	MEMALG_ADDMBUF = 0xC,
+	MEMALG_SUBMBUF = 0xD
+};
+
+/* PKO_QUERY_RTN_S[DQSTATUS] */
+enum pko_query_dqstatus {
+	PKO_DQSTATUS_PASS = 0,
+	PKO_DQSTATUS_BADSTATE = 0x8,
+	PKO_DQSTATUS_NOFPABUF = 0x9,
+	PKO_DQSTATUS_NOPKOBUF = 0xA,
+	PKO_DQSTATUS_FAILRTNPTR = 0xB,
+	PKO_DQSTATUS_ALREADY = 0xC,
+	PKO_DQSTATUS_NOTCREATED = 0xD,
+	PKO_DQSTATUS_NOTEMPTY = 0xE,
+	PKO_DQSTATUS_SENDPKTDROP = 0xF
+};
+
+union wqe_word0 {
+	u64 u64;
+	struct {
+		__BITFIELD_FIELD(u64 rsvd_0:4,
+		__BITFIELD_FIELD(u64 aura:12,
+		__BITFIELD_FIELD(u64 rsvd_1:1,
+		__BITFIELD_FIELD(u64 apad:3,
+		__BITFIELD_FIELD(u64 channel:12,
+		__BITFIELD_FIELD(u64 bufs:8,
+		__BITFIELD_FIELD(u64 style:8,
+		__BITFIELD_FIELD(u64 rsvd_2:10,
+		__BITFIELD_FIELD(u64 pknd:6,
+		;)))))))))
+	};
+};
+
+union wqe_word1 {
+	u64 u64;
+	struct {
+		__BITFIELD_FIELD(u64 len:16,
+		__BITFIELD_FIELD(u64 rsvd_0:2,
+		__BITFIELD_FIELD(u64 rsvd_1:2,
+		__BITFIELD_FIELD(u64 grp:10,
+		__BITFIELD_FIELD(u64 tag_type:2,
+		__BITFIELD_FIELD(u64 tag:32,
+		;))))))
+	};
+};
+
+union wqe_word2 {
+	u64 u64;
+	struct {
+		__BITFIELD_FIELD(u64 software:1,
+		__BITFIELD_FIELD(u64 lg_hdr_type:5,
+		__BITFIELD_FIELD(u64 lf_hdr_type:5,
+		__BITFIELD_FIELD(u64 le_hdr_type:5,
+		__BITFIELD_FIELD(u64 ld_hdr_type:5,
+		__BITFIELD_FIELD(u64 lc_hdr_type:5,
+		__BITFIELD_FIELD(u64 lb_hdr_type:5,
+		__BITFIELD_FIELD(u64 is_la_ether:1,
+		__BITFIELD_FIELD(u64 rsvd_0:8,
+		__BITFIELD_FIELD(u64 vlan_valid:1,
+		__BITFIELD_FIELD(u64 vlan_stacked:1,
+		__BITFIELD_FIELD(u64 stat_inc:1,
+		__BITFIELD_FIELD(u64 pcam_flag4:1,
+		__BITFIELD_FIELD(u64 pcam_flag3:1,
+		__BITFIELD_FIELD(u64 pcam_flag2:1,
+		__BITFIELD_FIELD(u64 pcam_flag1:1,
+		__BITFIELD_FIELD(u64 is_frag:1,
+		__BITFIELD_FIELD(u64 is_l3_bcast:1,
+		__BITFIELD_FIELD(u64 is_l3_mcast:1,
+		__BITFIELD_FIELD(u64 is_l2_bcast:1,
+		__BITFIELD_FIELD(u64 is_l2_mcast:1,
+		__BITFIELD_FIELD(u64 is_raw:1,
+		__BITFIELD_FIELD(u64 err_level:3,
+		__BITFIELD_FIELD(u64 err_code:8,
+		;))))))))))))))))))))))))
+	};
+};
+
+union buf_ptr {
+	u64 u64;
+	struct {
+		__BITFIELD_FIELD(u64 size:16,
+		__BITFIELD_FIELD(u64 packet_outside_wqe:1,
+		__BITFIELD_FIELD(u64 rsvd0:5,
+		__BITFIELD_FIELD(u64 addr:42,
+		;))))
+	};
+};
+
+union wqe_word4 {
+	u64 u64;
+	struct {
+		__BITFIELD_FIELD(u64 ptr_vlan:8,
+		__BITFIELD_FIELD(u64 ptr_layer_g:8,
+		__BITFIELD_FIELD(u64 ptr_layer_f:8,
+		__BITFIELD_FIELD(u64 ptr_layer_e:8,
+		__BITFIELD_FIELD(u64 ptr_layer_d:8,
+		__BITFIELD_FIELD(u64 ptr_layer_c:8,
+		__BITFIELD_FIELD(u64 ptr_layer_b:8,
+		__BITFIELD_FIELD(u64 ptr_layer_a:8,
+		;))))))))
+	};
+};
+
+struct wqe {
+	union wqe_word0	word0;
+	union wqe_word1	word1;
+	union wqe_word2	word2;
+	union buf_ptr	packet_ptr;
+	union wqe_word4	word4;
+	u64		wqe_data[11];
+};
+
+enum port_mode {
+	PORT_MODE_DISABLED,
+	PORT_MODE_SGMII,
+	PORT_MODE_RGMII,
+	PORT_MODE_XAUI,
+	PORT_MODE_RXAUI,
+	PORT_MODE_XLAUI,
+	PORT_MODE_XFI,
+	PORT_MODE_10G_KR,
+	PORT_MODE_40G_KR4
+};
+
+enum lane_mode {
+	R_25G_REFCLK100,
+	R_5G_REFCLK100,
+	R_8G_REFCLK100,
+	R_125G_REFCLK15625_KX,
+	R_3125G_REFCLK15625_XAUI,
+	R_103125G_REFCLK15625_KR,
+	R_125G_REFCLK15625_SGMII,
+	R_5G_REFCLK15625_QSGMII,
+	R_625G_REFCLK15625_RXAUI,
+	R_25G_REFCLK125,
+	R_5G_REFCLK125,
+	R_8G_REFCLK125
+};
+
+struct port_status {
+	int	link;
+	int	duplex;
+	int	speed;
+};
+
+static inline u64 oct_csr_read(u64 addr)
+{
+	return __raw_readq((void __iomem *)addr);
+}
+
+static inline void oct_csr_write(u64 data, u64 addr)
+{
+	__raw_writeq(data, (void __iomem *)addr);
+}
+
+extern int ilk0_lanes;
+extern int ilk1_lanes;
+
+void bgx_nexus_load(void);
+
+int bgx_port_allocate_pknd(int node);
+int bgx_port_get_pknd(int node, int bgx, int index);
+enum port_mode bgx_port_get_mode(int node, int bgx, int index);
+int bgx_port_get_qlm(int node, int bgx, int index);
+void bgx_port_set_netdev(struct device *dev, struct net_device *netdev);
+int bgx_port_enable(struct net_device *netdev);
+int bgx_port_disable(struct net_device *netdev);
+const u8 *bgx_port_get_mac(struct net_device *netdev);
+void bgx_port_set_rx_filtering(struct net_device *netdev);
+int bgx_port_change_mtu(struct net_device *netdev, int new_mtu);
+int bgx_port_ethtool_get_link_ksettings(struct net_device *netdev,
+					struct ethtool_link_ksettings *cmd);
+int bgx_port_ethtool_get_settings(struct net_device *netdev,
+				  struct ethtool_cmd *cmd);
+int bgx_port_ethtool_set_settings(struct net_device *netdev,
+				  struct ethtool_cmd *cmd);
+int bgx_port_ethtool_nway_reset(struct net_device *netdev);
+int bgx_port_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+
+void bgx_port_mix_assert_reset(struct net_device *netdev, int mix, bool v);
+
+int octeon3_pki_vlan_init(int node);
+int octeon3_pki_cluster_init(int node, struct platform_device *pdev);
+int octeon3_pki_ltype_init(int node);
+int octeon3_pki_enable(int node);
+int octeon3_pki_port_init(int node, int aura, int grp, int skip, int mb_size,
+			  int pknd, int num_rx_cxt);
+int octeon3_pki_get_stats(int node, int pknd, u64 *packets, u64 *octets,
+			  u64 *dropped);
+int octeon3_pki_set_ptp_skip(int node, int pknd, int skip);
+int octeon3_pki_port_shutdown(int node, int pknd);
+void octeon3_pki_shutdown(int node);
+
+void octeon3_sso_pass1_limit(int node, int grp);
+int octeon3_sso_init(int node, int aura);
+void octeon3_sso_shutdown(int node, int aura);
+int octeon3_sso_alloc_grp(int node, int grp);
+int octeon3_sso_alloc_grp_range(int node, int req_grp, int req_cnt,
+				bool use_last_avail, int *grp);
+void octeon3_sso_free_grp(int node, int grp);
+void octeon3_sso_free_grp_range(int node, int *grp, int req_cnt);
+void octeon3_sso_irq_set(int node, int grp, bool en);
+
+int octeon3_pko_interface_init(int node, int interface, int index,
+			       enum octeon3_mac_type mac_type, int ipd_port);
+int octeon3_pko_activate_dq(int node, int dq, int cnt);
+int octeon3_pko_get_fifo_size(int node, int interface, int index,
+			      enum octeon3_mac_type mac_type);
+int octeon3_pko_set_mac_options(int node, int interface, int index,
+				enum octeon3_mac_type mac_type, bool fcs_en,
+				bool pad_en, int fcs_sop_off);
+int octeon3_pko_init_global(int node, int aura);
+int octeon3_pko_interface_uninit(int node, const int *dq, int num_dq);
+int octeon3_pko_exit_global(int node);
+
+#endif /* _OCTEON3_H_ */