Comments
Patch
@@ -687,6 +687,7 @@ smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr,
#define CHIP_9215 0x115A
#define CHIP_9217 0x117A
#define CHIP_9218 0x118A
+#define CHIP_9311 0x9311
struct chip_id {
u16 id;
@@ -702,6 +703,7 @@ static const struct chip_id chip_ids[] = {
{ CHIP_9215, "LAN9215" },
{ CHIP_9217, "LAN9217" },
{ CHIP_9218, "LAN9218" },
+ { CHIP_9311, "LAN9311" },
{ 0, NULL },
};
@@ -856,6 +856,7 @@ static int __devinit smsc911x_mii_init(struct platform_device *pdev,
case 0x01150000:
case 0x117A0000:
case 0x115A0000:
+ case 0x93110000:
/* External PHY supported, try to autodetect */
smsc911x_phy_initialise_external(pdata);
break;
@@ -867,8 +868,15 @@ static int __devinit smsc911x_mii_init(struct platform_device *pdev,
}
if (!pdata->using_extphy) {
- /* Mask all PHYs except ID 1 (internal) */
- pdata->mii_bus->phy_mask = ~(1 << 1);
+ /* Mask all PHYs except internal IDs */
+ switch(pdata->idrev & 0xFFFF0000){
+ case 0x93110000:
+ pdata->mii_bus->phy_mask = ~(1 << 0) & ~(1 << 1) & ~(1 << 2);
+ break;
+ default:
+ pdata->mii_bus->phy_mask = ~(1 << 1);
+ break;
+ }
}
if (mdiobus_register(pdata->mii_bus)) {
@@ -1870,7 +1878,8 @@ static int __devinit smsc911x_init(struct net_device *dev)
case 0x92110000:
case 0x92200000:
case 0x92210000:
- /* LAN9210/LAN9211/LAN9220/LAN9221 */
+ case 0x93110000:
+ /* LAN9210/LAN9211/LAN9220/LAN9221/LAN9311 */
pdata->generation = 4;
break;
The smsc9311 chip is an switch chip with 3 ports that have almost the same register structure of the LAN9115. There are some differences in IRQ regs, but that doesn't seem to be a problem right now. This patch was tested on a Torpedo (OMAP35x) based board and is based on v2.6.38-rc4. Fernando From e987729802dd3980041fd7e48e68f3a9f53424bd Mon Sep 17 00:00:00 2001 From: Fernando Governatore <fernando@syspac.com.br> Date: Tue, 15 Feb 2011 12:10:22 -0200 Subject: [PATCH] Add basic support for smsc9311 in smsc911x Driver The smsc9311 chip is an switch chip with three ports. Here is assumed that only the first one is connected to the host. Makes the driver aware of the chip revision id. If no external phy is being used, mask out all the PHY IDs that are not present by default. The default switch configuration is not changed. --- drivers/net/smc911x.h | 2 ++ drivers/net/smsc911x.c | 15 ++++++++++++--- 2 files changed, 14 insertions(+), 3 deletions(-)