diff mbox series

[LEDE-DEV,v3] ipq806x: ipq4019: add ap-dk01.1-c1 board support

Message ID 20171029232426.4025-1-roman@advem.lv
State Accepted
Headers show
Series [LEDE-DEV,v3] ipq806x: ipq4019: add ap-dk01.1-c1 board support | expand

Commit Message

Roman Yeryomin Oct. 29, 2017, 11:24 p.m. UTC 
AP-DK01.1-C1 is QCA dev board with:
- ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio
- 256MB RAM
- 32MB SPI flash
- QCA8075 multiport ethernet phy (WAN port, 4x LAN ports)

First installation via u-boot:
sf probe
sf erase 0x180000 0x1a00000
tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin
sf write 0x84000000 0x180000 $filesize

Further upgrades via sysupgrade.

Changes:
- add partitions
- set memory size to 256MB
- add reserved memory mapping
- add correct compatible string
- add image generation
- extract pre-cal data from ART partition

Compile and run tested.
Wirespeed NAT can be achieved with spreading rx interrupts over different
cores. Wifi speed is ~550Mbps @5GHz in open air.

Note:
AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has
ipq4028 instead of ipq4018 on board.

Changes since v2:
- based on dts(i) rework/cleanup submitted:
  http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html
- precise reserved memory mapping
- more precise description
- compatible string

Signed-off-by: Roman Yeryomin <roman@advem.lv>
---
 .../etc/hotplug.d/firmware/11-ath10k-caldata       |   6 ++
 target/linux/ipq806x/base-files/lib/ipq806x.sh     |   3 +
 target/linux/ipq806x/image/Makefile                |  18 +++-
 ...pq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch | 115 +++++++++++++++++++++
 ...pq4019-ap-dk01.1-c1-add-compatible-string.patch |  10 ++
 5 files changed, 151 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch
 create mode 100644 target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
diff mbox series

Patch

diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 39757eb161..4c5b55bc53 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -47,6 +47,9 @@  board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
 	case "$board" in
+	ap-dk01.1-c1)
+		ath10kcal_extract "ART" 4096 12064
+		;;
 	fritz4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
@@ -54,6 +57,9 @@  case "$FIRMWARE" in
 	;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 	case "$board" in
+	ap-dk01.1-c1)
+		ath10kcal_extract "ART" 20480 12064
+		;;
 	fritz4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh
index e8ff7ea3f8..940c7ef204 100644
--- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
+++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
@@ -14,6 +14,9 @@  ipq806x_board_detect() {
 	machine=$(cat /proc/device-tree/model)
 
 	case "$machine" in
+	*"AP-DK01.1-C1")
+		name="ap-dk01.1-c1"
+		;;
 	*"AP148")
 		name="ap148"
 		;;
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index f6f7f421b8..c2e1290671 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -251,6 +251,22 @@  define Device/VR2600v
 	IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
 endef
 
+define Device/AP-DK01.1-C1
+	PROFILES += $$(DEVICE_NAME)
+	DEVICE_TITLE := QCA AP-DK01.1-C1
+	BOARD_NAME := ap-dk01.1-c1
+	DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
+	KERNEL_LOADADDR := 0x80208000
+	KERNEL_INSTALL := 1
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	FILESYSTEMS := squashfs
+	$(call Device/FitImage)
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca4019
+endef
+
 define Device/AP-DK04.1-C1
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@@ -265,6 +281,6 @@  define Device/AP-DK04.1-C1
 endef
 
 TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
-		  R7500v2 R7800 NBG6817 VR2600v AP-DK04.1-C1
+		  R7500v2 R7800 NBG6817 VR2600v AP-DK01.1-C1 AP-DK04.1-C1
 
 $(eval $(call BuildImage))
diff --git a/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch b/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch
new file mode 100644
index 0000000000..e9d262069f
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch
@@ -0,0 +1,115 @@ 
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+@@ -19,4 +19,112 @@
+ / {
+ 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+ 
++	memory {
++		device_type = "memory";
++		reg = <0x80000000 0x10000000>;
++	};
++
++	reserved-memory {
++		#address-cells = <0x1>;
++		#size-cells = <0x1>;
++		ranges;
++
++		apps_bl@87000000 {
++			reg = <0x87000000 0x400000>;
++			no-map;
++		};
++
++		sbl@87400000 {
++			reg = <0x87400000 0x100000>;
++			no-map;
++		};
++
++		cnss_debug@87500000 {
++			reg = <0x87500000 0x600000>;
++			no-map;
++		};
++
++		cpu_context_dump@87b00000 {
++			reg = <0x87b00000 0x080000>;
++			no-map;
++		};
++
++		tz_apps@87b80000 {
++			reg = <0x87b80000 0x280000>;
++			no-map;
++		};
++
++		smem@87e00000 {
++			reg = <0x87e00000 0x080000>;
++			no-map;
++		};
++
++		tz@87e80000 {
++			reg = <0x87e80000 0x180000>;
++			no-map;
++		};
++	};
++};
++
++&spi_0 {
++	mx25l25635f@0 {
++		compatible = "mx25l25635f", "jedec,spi-nor";
++		#address-cells = <1>;
++		#size-cells = <1>;
++		reg = <0>;
++		spi-max-frequency = <24000000>;
++
++		SBL1@0 {
++			label = "SBL1";
++			reg = <0x0 0x40000>;
++			read-only;
++		};
++		MIBIB@40000 {
++			label = "MIBIB";
++			reg = <0x40000 0x20000>;
++			read-only;
++		};
++		QSEE@60000 {
++			label = "QSEE";
++			reg = <0x60000 0x60000>;
++			read-only;
++		};
++		CDT@c0000 {
++			label = "CDT";
++			reg = <0xc0000 0x10000>;
++			read-only;
++		};
++		DDRPARAMS@d0000 {
++			label = "DDRPARAMS";
++			reg = <0xd0000 0x10000>;
++			read-only;
++		};
++		APPSBLENV@e0000 {
++			label = "APPSBLENV";
++			reg = <0xe0000 0x10000>;
++			read-only;
++		};
++		APPSBL@f0000 {
++			label = "APPSBL";
++			reg = <0xf0000 0x80000>;
++			read-only;
++		};
++		ART@170000 {
++			label = "ART";
++			reg = <0x170000 0x10000>;
++			read-only;
++		};
++		kernel@180000 {
++			label = "kernel";
++			reg = <0x180000 0x400000>;
++		};
++		rootfs@580000 {
++			label = "rootfs";
++			reg = <0x580000 0x1600000>;
++		};
++		firmware@180000 {
++			label = "firmware";
++			reg = <0x180000 0x1a00000>;
++		};
++	};
+ };
diff --git a/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch b/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
new file mode 100644
index 0000000000..2d4ff31046
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
@@ -0,0 +1,10 @@ 
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+@@ -18,6 +18,7 @@
+ 
+ / {
+ 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
++	compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
+ 
+ 	memory {
+ 		device_type = "memory";