[OpenWrt-Devel,v2] merge: add OpenWrt branding

Message ID 1509032482-21415-1-git-send-email-wigyori@uid0.hu
State New
Headers show
Series
  • [OpenWrt-Devel,v2] merge: add OpenWrt branding
Related show

Commit Message

Zoltan HERPAI Oct. 26, 2017, 3:41 p.m.
Given that we've decided to sail under the same flag for
the benefit of the whole community, and acknowledge the
achievements of the LEDE project, let's start the final
steps of the merge.

The git and other sources are untouched until the infra merge.

v2: - dismiss bugtracker and forum change
    - update uhttpd cert gen
    - update banner
    - update busybox NSLOOKUP patch

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
---
 Config.in                                          |  2 +-
 Makefile                                           |  2 +-
 README                                             |  6 +++---
 include/image-commands.mk                          |  6 +++---
 include/image.mk                                   |  2 +-
 include/prereq-build.mk                            |  2 +-
 include/version.mk                                 |  8 ++++----
 package/base-files/Makefile                        |  2 +-
 package/base-files/files/bin/config_generate       | 10 +++++-----
 package/base-files/files/etc/banner                | 23 ++++++++++++----------
 package/base-files/files/etc/init.d/system         |  2 +-
 .../files/lib/preinit/10_indicate_preinit          |  2 +-
 package/base-files/image-config.in                 | 10 +++++-----
 package/boot/uboot-layerscape-armv8_32b/Makefile   |  2 +-
 .../kernel/broadcom-wl/files/lib/wifi/broadcom.sh  |  2 +-
 package/kernel/mac80211/files/lib/wifi/mac80211.sh |  2 +-
 package/network/services/hostapd/files/hostapd.sh  |  4 ++--
 package/network/services/lldpd/files/lldpd.config  |  2 +-
 package/network/services/lldpd/files/lldpd.init    |  2 +-
 .../network/services/samba36/files/samba.config    |  4 ++--
 package/network/services/samba36/files/samba.init  |  6 +++---
 .../network/services/uhttpd/files/uhttpd.config    |  2 +-
 package/network/services/uhttpd/files/uhttpd.init  |  2 +-
 package/network/utils/iproute2/Makefile            |  2 +-
 package/utils/busybox/Config-defaults.in           |  4 ++--
 package/utils/busybox/config/networking/Config.in  | 12 +++++------
 .../busybox/patches/230-add_nslookup_lede.patch    | 16 +++++++--------
 package/utils/ct-bugcheck/src/bugcheck.sh          |  4 ++--
 scripts/brcmImage.pl                               |  2 +-
 scripts/checkpatch.pl                              |  2 +-
 scripts/config/mconf.c                             |  2 +-
 scripts/qemustart                                  | 12 +++++------
 target/imagebuilder/Config.in                      |  2 +-
 target/imagebuilder/files/repositories.conf        |  2 +-
 target/linux/apm821xx/image/Makefile               |  2 +-
 target/linux/ar71xx/image/generic.mk               |  4 ++--
 target/linux/ar71xx/image/legacy.mk                |  4 ++--
 target/linux/ar71xx/image/tp-link.mk               |  2 +-
 target/linux/armvirt/README                        | 16 +++++++--------
 target/linux/brcm63xx/image/bcm63xx.mk             |  6 +++---
 target/linux/lantiq/image/Makefile                 |  2 +-
 target/linux/mcs814x/image/Makefile                |  2 +-
 target/linux/mvebu/image/cfbase-boot.script        |  4 ++--
 target/linux/mvebu/image/cfpro-boot.script         |  4 ++--
 .../linux/omap24xx/base-files/etc/config/wireless  |  2 +-
 target/linux/uml/README                            |  5 +++--
 target/linux/x86/image/grub-iso.cfg                |  2 +-
 target/linux/x86/image/grub.cfg                    |  4 ++--
 target/sdk/Config.in                               |  4 ++--
 target/sdk/files/README.SDK                        |  4 ++--
 target/toolchain/Config.in                         |  6 +++---
 target/toolchain/files/README.TOOLCHAIN            |  2 +-
 toolchain/gcc/common.mk                            |  4 ++--
 53 files changed, 124 insertions(+), 120 deletions(-)

Comments

Imre Kaloz Oct. 26, 2017, 4:32 p.m. | #1
Hi Paul,

On 2017-10-26 18:16, por@oranjevos.nl wrote:
> Please, could you add some info on what has changed with the new version of the patch ?
> And, it would be appreciated when the SOB would not use an openwrt.org mail address (assuming Imre has another suitable mail available).
>
> Paul
>
>> Op 26 okt. 2017, om 17:41 heeft Zoltan HERPAI<wigyori@uid0.hu>  het volgende geschreven:
>>
>> Given that we've decided to sail under the same flag for
>> the benefit of the whole community, and acknowledge the
>> achievements of the LEDE project, let's start the final
>> steps of the merge.
>>
>> The git and other sources are untouched until the infra merge.
>>
>> v2: - dismiss bugtracker and forum change
>>     - update uhttpd cert gen
>>     - update banner
>>     - update busybox NSLOOKUP patch
>>
>> Signed-off-by: Zoltan HERPAI<wigyori@uid0.hu>
>> Signed-off-by: Imre Kaloz<kaloz@openwrt.org>
>>

Please find the changes listed in the description, but left it in above 
as well. As for using another email address, I won't use my personal one 
for this as I don't use this for that, simply as that. This is fully 
following what the merge agreement that has been voted for and got 
accepted defined.


Best,

Imre
<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
  </head>
  <body text="#000000" bgcolor="#FFFFFF">
    <p>Hi Paul,</p>
    On 2017-10-26 18:16, <a class="moz-txt-link-abbreviated"
      href="mailto:por@oranjevos.nl">por@oranjevos.nl</a> wrote:<br>
    <blockquote type="cite"
      cite="mid:D98CB99C-708D-41E4-B5CA-8AFF3DF0B766@oranjevos.nl">
      <pre wrap="">Please, could you add some info on what has changed with the new version of the patch ?
And, it would be appreciated when the SOB would not use an openwrt.org mail address (assuming Imre has another suitable mail available).

Paul

</pre>
      <blockquote type="cite">
        <pre wrap="">Op 26 okt. 2017, om 17:41 heeft Zoltan HERPAI <a class="moz-txt-link-rfc2396E" href="mailto:wigyori@uid0.hu">&lt;wigyori@uid0.hu&gt;</a> het volgende geschreven:

Given that we've decided to sail under the same flag for
the benefit of the whole community, and acknowledge the
achievements of the LEDE project, let's start the final
steps of the merge.

The git and other sources are untouched until the infra merge.

v2: - dismiss bugtracker and forum change
   - update uhttpd cert gen
   - update banner
   - update busybox NSLOOKUP patch

Signed-off-by: Zoltan HERPAI <a class="moz-txt-link-rfc2396E" href="mailto:wigyori@uid0.hu">&lt;wigyori@uid0.hu&gt;</a>
Signed-off-by: Imre Kaloz <a class="moz-txt-link-rfc2396E" href="mailto:kaloz@openwrt.org">&lt;kaloz@openwrt.org&gt;</a>

</pre>
      </blockquote>
    </blockquote>
    <br>
    <p>Please find the changes listed in the description, but left it in
      above as well. As for using another email address, I won't use my
      personal one for this as I don't use this for that, simply as
      that. This is fully following what the merge agreement that has
      been voted for and got accepted defined.</p>
    <p><br>
    </p>
    <p>Best,<br>
    </p>
    <p>Imre<br>
    </p>
    <br>
  </body>
</html>
Hannu Nyman Oct. 26, 2017, 6:23 p.m. | #2
Zoltan HERPAI kirjoitti 26.10.2017 klo 18:41:
> + -----------------------------------------------------
> +  * 2 oz. Orange Juice         Combine all juices in a
> +  * 2 oz. Pineapple Juice      tall glass filled with
> +  * 2 oz. Grapefruit Juice     ice, stir well.
> +  * 2 oz. Cranberry Juice
> + -----------------------------------------------------


Still promoting the drink recipe although the voting is clearly going against 
release names and also all given feedback about drinks has been negative?

Please get rid of it. It makes the whole thing looks adolescent.
Karl Palsson Oct. 26, 2017, 9:33 p.m. | #3
Hannu Nyman <hannu.nyman@iki.fi> wrote:
> Zoltan HERPAI kirjoitti 26.10.2017 klo 18:41:
> > + -----------------------------------------------------
> > +  * 2 oz. Orange Juice         Combine all juices in a
> > +  * 2 oz. Pineapple Juice      tall glass filled with
> > +  * 2 oz. Grapefruit Juice     ice, stir well.
> > +  * 2 oz. Cranberry Juice
> > + -----------------------------------------------------
> 
> 
> Still promoting the drink recipe although the voting is clearly
> going against release names and also all given feedback about
> drinks has been negative?

Not all.  I quite like the drinks, I was just strongly against going back to the old name. right now.  

When DD was chosen it was far from 100% one way or the other too.

Cheers,
Karl P
Yousong Zhou Oct. 27, 2017, 1:41 a.m. | #4
On 27 October 2017 at 00:32, Imre Kaloz <kaloz@openwrt.org> wrote:
> Hi Paul,
>
> On 2017-10-26 18:16, por@oranjevos.nl wrote:
>
> Please, could you add some info on what has changed with the new version of
> the patch ?
> And, it would be appreciated when the SOB would not use an openwrt.org mail
> address (assuming Imre has another suitable mail available).
>
> Paul
>
> Op 26 okt. 2017, om 17:41 heeft Zoltan HERPAI <wigyori@uid0.hu> het volgende
> geschreven:
>
> Given that we've decided to sail under the same flag for
> the benefit of the whole community, and acknowledge the
> achievements of the LEDE project, let's start the final
> steps of the merge.
>
> The git and other sources are untouched until the infra merge.
>
> v2: - dismiss bugtracker and forum change
>    - update uhttpd cert gen
>    - update banner
>    - update busybox NSLOOKUP patch
>
> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
>
>
> Please find the changes listed in the description, but left it in above as
> well. As for using another email address, I won't use my personal one for
> this as I don't use this for that, simply as that. This is fully following
> what the merge agreement that has been voted for and got accepted defined.
>
>
> Best,
>
> Imre

According to the first clause of v3 of the proposal, current LEDE
project rules will be adopted into the merged OpenWrt project and that
means we need to either start another voting round to reword the
project rules on email accounts or the proposal itself
contradicts/invalidates itself.  Now we are having much fun with the
rules...

        yousong
Florian Fainelli Oct. 27, 2017, 7:54 p.m. | #5
On 10/27/2017 02:34 AM, por@oranjevos.nl wrote:
> Dear Imre,
> 
> On the info for the version of the patch: my error, must have overlooked the included version info, it is indeed included.
> 
> About the use of openwrt email addresses in the SOB:
> This has been discussed before, and the arguments against using an openwrt mail address as a personal address haven't vanished.
> The address in the SOB is meant to identify a contributor, most likely a natural person, not some entity of the openwrt project. Usage of an openwrt mail address suggests that the person using that address has another position in the project than those that use mail addresses not within the openwrt.org domain, which does not go well with LEDE rules.
> 
> IIRC, during discussions on the remerge, the following compromis was reached: usage of personal openwrt addresses wasn't ruled out completely, but only in passive sense, as a means to keep receiving mail on the address and active usage for personal business is not allowed. John remerge proposal v3 states clearly:
> - mail addresses may under no conditions be used for any personal business, consultancy, applying for jobs, ... purposes

Did you purposely omit the next bullet item that says?

- any mail sent from an openwrt.org account needs to adhere the
trademark policy and should only be used for FOSS purposes

Link:
http://lists.infradead.org/pipermail/lede-adm/2017-May/000517.html

> 
> As a mail address in a SOB is a personal address, is meant to be that, using an openwrt address in a SOB goes directly against the agreed on rules, and certainly against the spirit of the LEDE rules that have proven to be successful in making the project getting traction and commitment.

LEDE project rule #10 does only stipulate that new email addresses will
not be given away on the premises of and privacy and equality:

https://lede-project.org/rules
""""
10. The project will not offer email accounts under its project domain
for privacy and equality reasons.
""""

That sentence is written with the future tense, and therefore does not
try to impose or specify anything with respect to emails given before
(so in the past).

Therefore, my reading of the LEDE project rules and the remerge proposal
makes me so inclined as to think that Imre is not in direct violation of
the LEDE project rules regarding the use of an @openwrt.org email
contributor for FOSS perspectives.

Quite frankly, if the goal is just to give Zoltan and Imre a hard time
and nitpick on everything possible just to delay (purposely or not) the
remerge, then you are doing a great job at it, but this goes against
rule #12.

> Paul
> 
> 
>  
> 
>> Op 26 okt. 2017, om 18:32 heeft Imre Kaloz <kaloz@openwrt.org> het volgende geschreven:
>>
>> Hi Paul,
>>
>> On 2017-10-26 18:16, por@oranjevos.nl wrote:
>>> Please, could you add some info on what has changed with the new version of the patch ?
>>> And, it would be appreciated when the SOB would not use an openwrt.org mail address (assuming Imre has another suitable mail available).
>>>
>>> Paul
>>>
>>>
>>>> Op 26 okt. 2017, om 17:41 heeft Zoltan HERPAI <wigyori@uid0.hu>
>>>>  het volgende geschreven:
>>>>
>>>> Given that we've decided to sail under the same flag for
>>>> the benefit of the whole community, and acknowledge the
>>>> achievements of the LEDE project, let's start the final
>>>> steps of the merge.
>>>>
>>>> The git and other sources are untouched until the infra merge.
>>>>
>>>> v2: - dismiss bugtracker and forum change
>>>>    - update uhttpd cert gen
>>>>    - update banner
>>>>    - update busybox NSLOOKUP patch
>>>>
>>>> Signed-off-by: Zoltan HERPAI 
>>>> <wigyori@uid0.hu>
>>>>
>>>> Signed-off-by: Imre Kaloz 
>>>> <kaloz@openwrt.org>
>>>>
>>>>
>>>>
>>
>> Please find the changes listed in the description, but left it in above as well. As for using another email address, I won't use my personal one for this as I don't use this for that, simply as that. This is fully following what the merge agreement that has been voted for and got accepted defined.
>>
>>
>> Best,
>> Imre
>>
> 
> 
> _______________________________________________
> Lede-dev mailing list
> Lede-dev@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
>
Paul Oranje Oct. 28, 2017, 4:56 p.m. | #6
Dear Florian,

Seems the discussion that was raised on using a personal openwrt address in a SOB does not do much good so far and it is certainly not my intention to go against rule #12; I would be sorry if I did. The question I raised is, although about personal addresses, absolutely not aimed at anyone personally.

Your thorough reading of the rules makes sense: the future tense of rule #10 might be interpreted as to mean that existing addresses are exempted. But the principal reason, equality, mentioned in that very same rule for not offering (new) accounts under the openwrt domain, is by its sheer nature not restricted to the future. The wording in the remerge rules tries to leave some fair lapse for existing accounts, but using that space to the (maximum) extend that a strict reading of the words would allow, does not seem right. Usage for the purpose of (still) receiving mail is reasonable, using it actively for sending mail is ... more complicated.

On your question whether I purposely did not mention the restriction on adherence to trademark policy and FOSS purpose, the answer is simple: it did not seem relevant in this case (there is no reason to believe that the SOB violated that rule).

I do not think this issue warrants much more discussion as most that's relevant has probably been said and the relevance is relative.
It's up to you guys to decide want you want, to weight the odds, regards from a by-stander,
Paul


> Op 27 okt. 2017, om 21:54 heeft Florian Fainelli <f.fainelli@gmail.com> het volgende geschreven:
> 
> On 10/27/2017 02:34 AM, por@oranjevos.nl wrote:
>> Dear Imre,
>> 
>> On the info for the version of the patch: my error, must have overlooked the included version info, it is indeed included.
>> 
>> About the use of openwrt email addresses in the SOB:
>> This has been discussed before, and the arguments against using an openwrt mail address as a personal address haven't vanished.
>> The address in the SOB is meant to identify a contributor, most likely a natural person, not some entity of the openwrt project. Usage of an openwrt mail address suggests that the person using that address has another position in the project than those that use mail addresses not within the openwrt.org domain, which does not go well with LEDE rules.
>> 
>> IIRC, during discussions on the remerge, the following compromis was reached: usage of personal openwrt addresses wasn't ruled out completely, but only in passive sense, as a means to keep receiving mail on the address and active usage for personal business is not allowed. John remerge proposal v3 states clearly:
>> - mail addresses may under no conditions be used for any personal business, consultancy, applying for jobs, ... purposes
> 
> Did you purposely omit the next bullet item that says?
> 
> - any mail sent from an openwrt.org account needs to adhere the
> trademark policy and should only be used for FOSS purposes
> 
> Link:
> http://lists.infradead.org/pipermail/lede-adm/2017-May/000517.html
> 
>> 
>> As a mail address in a SOB is a personal address, is meant to be that, using an openwrt address in a SOB goes directly against the agreed on rules, and certainly against the spirit of the LEDE rules that have proven to be successful in making the project getting traction and commitment.
> 
> LEDE project rule #10 does only stipulate that new email addresses will
> not be given away on the premises of and privacy and equality:
> 
> https://lede-project.org/rules
> """"
> 10. The project will not offer email accounts under its project domain
> for privacy and equality reasons.
> """"
> 
> That sentence is written with the future tense, and therefore does not
> try to impose or specify anything with respect to emails given before
> (so in the past).
> 
> Therefore, my reading of the LEDE project rules and the remerge proposal
> makes me so inclined as to think that Imre is not in direct violation of
> the LEDE project rules regarding the use of an @openwrt.org email
> contributor for FOSS perspectives.
> 
> Quite frankly, if the goal is just to give Zoltan and Imre a hard time
> and nitpick on everything possible just to delay (purposely or not) the
> remerge, then you are doing a great job at it, but this goes against
> rule #12.
> 
>> Paul
>> 
>> 
>> 
>> 
>>> Op 26 okt. 2017, om 18:32 heeft Imre Kaloz <kaloz@openwrt.org> het volgende geschreven:
>>> 
>>> Hi Paul,
>>> 
>>> On 2017-10-26 18:16, por@oranjevos.nl wrote:
>>>> Please, could you add some info on what has changed with the new version of the patch ?
>>>> And, it would be appreciated when the SOB would not use an openwrt.org mail address (assuming Imre has another suitable mail available).
>>>> 
>>>> Paul
>>>> 
>>>> 
>>>>> Op 26 okt. 2017, om 17:41 heeft Zoltan HERPAI <wigyori@uid0.hu>
>>>>> het volgende geschreven:
>>>>> 
>>>>> Given that we've decided to sail under the same flag for
>>>>> the benefit of the whole community, and acknowledge the
>>>>> achievements of the LEDE project, let's start the final
>>>>> steps of the merge.
>>>>> 
>>>>> The git and other sources are untouched until the infra merge.
>>>>> 
>>>>> v2: - dismiss bugtracker and forum change
>>>>>  - update uhttpd cert gen
>>>>>  - update banner
>>>>>  - update busybox NSLOOKUP patch
>>>>> 
>>>>> Signed-off-by: Zoltan HERPAI 
>>>>> <wigyori@uid0.hu>
>>>>> 
>>>>> Signed-off-by: Imre Kaloz 
>>>>> <kaloz@openwrt.org>
>>>>> 
>>>>> 
>>>>> 
>>> 
>>> Please find the changes listed in the description, but left it in above as well. As for using another email address, I won't use my personal one for this as I don't use this for that, simply as that. This is fully following what the merge agreement that has been voted for and got accepted defined.
>>> 
>>> 
>>> Best,
>>> Imre
>>> 
>> 
>> 
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev
>> 
> 
> 
> -- 
> Florian
Philip Prindeville Oct. 28, 2017, 9:20 p.m. | #7
Hi all,

Does it seem to anyone else that we’re making this more complicated than it needs to be?

If one of the goals we’re going for from here on out is “equality”, then a basic litmus test to be applied to any action might be “does this get us closer to a level playing field, or further away”?

Since not everyone gets an @openwrt.org email address, I think the answer to “can we use @openwrt.org email addresses in SOB’s?” is by extension, “no, because it doesn’t get us closer to a level playing field."

We don’t need to argue the finer points of the letter of the law if the spirit of the law is already adequately clear.

-Philip


> On Oct 28, 2017, at 10:56 AM, por@oranjevos.nl wrote:
> 
> Dear Florian,
> 
> Seems the discussion that was raised on using a personal openwrt address in a SOB does not do much good so far and it is certainly not my intention to go against rule #12; I would be sorry if I did. The question I raised is, although about personal addresses, absolutely not aimed at anyone personally.
> 
> Your thorough reading of the rules makes sense: the future tense of rule #10 might be interpreted as to mean that existing addresses are exempted. But the principal reason, equality, mentioned in that very same rule for not offering (new) accounts under the openwrt domain, is by its sheer nature not restricted to the future. The wording in the remerge rules tries to leave some fair lapse for existing accounts, but using that space to the (maximum) extend that a strict reading of the words would allow, does not seem right. Usage for the purpose of (still) receiving mail is reasonable, using it actively for sending mail is ... more complicated.
> 
> On your question whether I purposely did not mention the restriction on adherence to trademark policy and FOSS purpose, the answer is simple: it did not seem relevant in this case (there is no reason to believe that the SOB violated that rule).
> 
> I do not think this issue warrants much more discussion as most that's relevant has probably been said and the relevance is relative.
> It's up to you guys to decide want you want, to weight the odds, regards from a by-stander,
> Paul
Hartmut Knaack Oct. 28, 2017, 11:52 p.m. | #8
Philip Prindeville wrote on 28.10.2017 23:20:
> Hi all,
>
> Does it seem to anyone else that we’re making this more complicated than it needs to be?
>
> If one of the goals we’re going for from here on out is “equality”, then a basic litmus test to be applied to any action might be “does this get us closer to a level playing field, or further away”?
>
> Since not everyone gets an @openwrt.org email address, I think the answer to “can we use @openwrt.org email addresses in SOB’s?” is by extension, “no, because it doesn’t get us closer to a level playing field."
>
> We don’t need to argue the finer points of the letter of the law if the spirit of the law is already adequately clear.
>
> -Philip
>

Full Ack!
And in addition, from my point of view, the openwrt mail service got
seriously tainted, when the early LEDE founders got their @openwrt.org
accounts deactivated without prior notice. What is it worth having such
an address in a SOB, if you can't trust that it will last?
Thanks,

Hartmut
Yousong Zhou Oct. 30, 2017, 1:57 a.m. | #9
On 28 October 2017 at 03:54, Florian Fainelli <f.fainelli@gmail.com> wrote:

...

>
> Quite frankly, if the goal is just to give Zoltan and Imre a hard time
> and nitpick on everything possible just to delay (purposely or not) the
> remerge, then you are doing a great job at it, but this goes against
> rule #12.
>

No, this is never ever meant to be personal.  I am sorry if anyone
feels that way.

The email account thing really matters.  I remembered it was talked of
at the beginning of the fork (maybe also in those irc meetings), then
being part of the LEDE project rules, discussed again in the merge
proposal, now again in the process of actually doing the merge.  I got
the impression that we really did not have worked the split out.

Sure, "Be nice to each other" is one of the rule, but please be
cautious never to let this rule bend ourselves to make compromises,
then let real issues to be papered over or glossed over.

Regards,
                yousong
Mike Baker Oct. 31, 2017, 3:46 a.m. | #10
On 10/28/2017 4:52 PM, Hartmut Knaack wrote:

> Philip Prindeville wrote on 28.10.2017 23:20:
>> Hi all,
>>
>> Does it seem to anyone else that we’re making this more complicated 
>> than it needs to be?
>>
>> If one of the goals we’re going for from here on out is “equality”, 
>> then a basic litmus test to be applied to any action might be “does 
>> this get us closer to a level playing field, or further away”?
>>
>> Since not everyone gets an @openwrt.org email address, I think the 
>> answer to “can we use @openwrt.org email addresses in SOB’s?” is by 
>> extension, “no, because it doesn’t get us closer to a level playing 
>> field."
>>
>> We don’t need to argue the finer points of the letter of the law if 
>> the spirit of the law is already adequately clear.
>>
>> -Philip
>>
>
> Full Ack!
> And in addition, from my point of view, the openwrt mail service got
> seriously tainted, when the early LEDE founders got their @openwrt.org
> accounts deactivated without prior notice. What is it worth having such
> an address in a SOB, if you can't trust that it will last?
> Thanks,
Actually you've both hit the nail on the head, the email accounts were 
disabled immediately after the LEDE announcement because it was 
announced using an openwrt email address but without discussion, prior 
knowledge or approval from the rest of the group.

(All history now, let's work on fixing things)

- Mike
Hartmut Knaack Nov. 2, 2017, 12:18 a.m. | #11
Mike Baker wrote on 31.10.2017 04:46:
> On 10/28/2017 4:52 PM, Hartmut Knaack wrote:
>
>> Philip Prindeville wrote on 28.10.2017 23:20:
>>> Hi all,
>>>
>>> Does it seem to anyone else that we’re making this more complicated
>>> than it needs to be?
>>>
>>> If one of the goals we’re going for from here on out is “equality”,
>>> then a basic litmus test to be applied to any action might be “does
>>> this get us closer to a level playing field, or further away”?
>>>
>>> Since not everyone gets an @openwrt.org email address, I think the
>>> answer to “can we use @openwrt.org email addresses in SOB’s?” is by
>>> extension, “no, because it doesn’t get us closer to a level playing
>>> field."
>>>
>>> We don’t need to argue the finer points of the letter of the law if
>>> the spirit of the law is already adequately clear.
>>>
>>> -Philip
>>>
>>
>> Full Ack!
>> And in addition, from my point of view, the openwrt mail service got
>> seriously tainted, when the early LEDE founders got their @openwrt.org
>> accounts deactivated without prior notice. What is it worth having such
>> an address in a SOB, if you can't trust that it will last?
>> Thanks,
> Actually you've both hit the nail on the head, the email accounts were
> disabled immediately after the LEDE announcement because it was
> announced using an openwrt email address but without discussion, prior
> knowledge or approval from the rest of the group.
>

This raises some more questions: which terms and conditions did people have
to approve to get an @openwrt.org address? Where can these terms and
conditions be found? Is every email sent from such an address supposed to
be discussed and approved by the group before it gets sent?
Furthermore: how many percent of "the group" needs to agree when it comes
to disabling someones address? 50% or 67%?

> (All history now, let's work on fixing things)

If we don't learn from our mistakes, history will repeat.

>
> - Mike
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
>
Hauke Mehrtens Nov. 2, 2017, 12:02 p.m. | #12
On 10/26/2017 09:05 PM, Dave Taht wrote:
> Hannu Nyman <hannu.nyman@iki.fi> writes:
> 
>> Zoltan HERPAI kirjoitti 26.10.2017 klo 18:41:
>>> + -----------------------------------------------------
>>> +  * 2 oz. Orange Juice         Combine all juices in a
>>> +  * 2 oz. Pineapple Juice      tall glass filled with
>>> +  * 2 oz. Grapefruit Juice     ice, stir well.
>>> +  * 2 oz. Cranberry Juice
>>> + -----------------------------------------------------
>>
>>
>> Still promoting the drink recipe although the voting is clearly going against
>> release names and also all given feedback about drinks has been negative?
> 
> I incidentally have always liked the in-your-face anti-establishment
> flair of using codenames based on alcoholic beverages. The drink meme
> beats the hell out of corporate blandness with selecting codenames out
> of a marketing jar - "Project Olympus!", and is easier to remember than
> 17.X.Y.
> 
> "Blurry fish butt" I think was (until recently) a codename for the linux kernel.
> 
> and I've joked elsewhere that I'd like a codename named "green goddess".
> 
> https://www.allbud.com/marijuana-strains/sativa-dominant-hybrid/green-goddess
> 
>> Please get rid of it. It makes the whole thing looks adolescent.
> 
> And replace it with what? (where was the voting?)
The vote happened here:
http://lists.infradead.org/pipermail/lede-adm/2017-October/000636.html

I am also for removing this, without the code names it does not makes
any sense.

This banner is the first thing companies change to add they own brand.

If you want to annoy them, use this license in some important part: ;-)
WTFPL (Do What the Fuck You Want To Public License)


Hauke
Zoltan HERPAI Nov. 2, 2017, 12:20 p.m. | #13
Hi Hauke,

Hauke Mehrtens wrote:
> On 10/26/2017 09:05 PM, Dave Taht wrote:
>   
>> Hannu Nyman <hannu.nyman@iki.fi> writes:
>>
>>     
>>> Zoltan HERPAI kirjoitti 26.10.2017 klo 18:41:
>>>       
>>>> + -----------------------------------------------------
>>>> +  * 2 oz. Orange Juice         Combine all juices in a
>>>> +  * 2 oz. Pineapple Juice      tall glass filled with
>>>> +  * 2 oz. Grapefruit Juice     ice, stir well.
>>>> +  * 2 oz. Cranberry Juice
>>>> + -----------------------------------------------------
>>>>         
>>> Still promoting the drink recipe although the voting is clearly going against
>>> release names and also all given feedback about drinks has been negative?
>>>       
>> I incidentally have always liked the in-your-face anti-establishment
>> flair of using codenames based on alcoholic beverages. The drink meme
>> beats the hell out of corporate blandness with selecting codenames out
>> of a marketing jar - "Project Olympus!", and is easier to remember than
>> 17.X.Y.
>>
>> "Blurry fish butt" I think was (until recently) a codename for the linux kernel.
>>
>> and I've joked elsewhere that I'd like a codename named "green goddess".
>>
>> https://www.allbud.com/marijuana-strains/sativa-dominant-hybrid/green-goddess
>>
>>     
>>> Please get rid of it. It makes the whole thing looks adolescent.
>>>       
>> And replace it with what? (where was the voting?)
>>     
> The vote happened here:
> http://lists.infradead.org/pipermail/lede-adm/2017-October/000636.html
>
> I am also for removing this, without the code names it does not makes
> any sense.
>
> This banner is the first thing companies change to add they own brand.
>
> If you want to annoy them, use this license in some important part: ;-)
> WTFPL (Do What the Fuck You Want To Public License)
>   

Fine, then please advise where else this needs to be removed from, 
before I send the v3.

$ grep RELEASE include/version.mk
RELEASE:=Reboot
VERSION_NICK:=$(if $(VERSION_NICK),$(VERSION_NICK),$(RELEASE))

For the sake of full transparency, Imre and me was not part of the vote, 
as that was sent to lede-adm, without including openwrt-hackers or 
openwrt-devel.

Regards,
Zoltan H
Mike Baker Nov. 2, 2017, 3:59 p.m. | #14
On 11/1/2017 5:18 PM, Hartmut Knaack wrote:

> This raises some more questions: which terms and conditions did people 
> have
> to approve to get an @openwrt.org address? Where can these terms and
> conditions be found? Is every email sent from such an address supposed to
> be discussed and approved by the group before it gets sent?
> Furthermore: how many percent of "the group" needs to agree when it comes
> to disabling someones address? 50% or 67%?
The issue is the use of an openwrt email address to make an announcement 
on behalf of openwrt stating that openwrt had become lede without ever 
discussing it. There were no warning signs, everybody from openwrt 
suddenly found out that there was a new project and they had been kicked 
out.

- Mike
Hartmut Knaack Nov. 2, 2017, 8:44 p.m. | #15
Mike Baker wrote on 02.11.2017 16:59:
> On 11/1/2017 5:18 PM, Hartmut Knaack wrote:
>
>> This raises some more questions: which terms and conditions did people
>> have
>> to approve to get an @openwrt.org address? Where can these terms and
>> conditions be found? Is every email sent from such an address supposed to
>> be discussed and approved by the group before it gets sent?
>> Furthermore: how many percent of "the group" needs to agree when it comes
>> to disabling someones address? 50% or 67%?
> The issue is the use of an openwrt email address to make an announcement
> on behalf of openwrt stating that openwrt had become lede without ever
> discussing it. There were no warning signs, everybody from openwrt
> suddenly found out that there was a new project and they had been kicked
> out.
>
> - Mike
>

I'm reading over Jows announcement over and over again, but can not see,
where he would announce it on behalf of openwrt. He has been using his
@openwrt.org, just like countless times before on the mailing list.
I can also not find the claim, that LEDE would be the successor of openwrt,
just that quite a lot of active developers would try to start a new project
with a different focus on certain issues.
I agree, that there were no warning signs on the public mailing list. But
still, what have been the terms and conditions for project email addresses?
How are sanctions decided?
And if I pick up your statement, that using an openwrt email address
implies that it is sent on behalf of openwrt (and thus, reviewed by the
project members and acknowledged by the majority), there should just be one
account for public relations (like version announcements, business
communication on behalf of the project).
I understand, that your feelings got hurt by the announcement, but your
reaction was not professional. So, IMHO you messed up, now deal with it.
Thanks,

Hartmut
Mike Baker Nov. 3, 2017, 5:40 a.m. | #16
On 11/2/2017 1:44 PM, Hartmut Knaack wrote:
> I agree, that there were no warning signs on the public mailing list.
As I said before, all history now; discussing it further serves no purpose.

- Mike

Patch

diff --git a/Config.in b/Config.in
index ddbc4e2..d30c048 100644
--- a/Config.in
+++ b/Config.in
@@ -4,7 +4,7 @@ 
 # See /LICENSE for more information.
 #
 
-mainmenu "LEDE Configuration"
+mainmenu "OpenWrt Configuration"
 
 config MODULES
 	option modules
diff --git a/Makefile b/Makefile
index 09db75c..0a1f96a 100644
--- a/Makefile
+++ b/Makefile
@@ -14,7 +14,7 @@  export TOPDIR LC_ALL LANG TZ
 
 empty:=
 space:= $(empty) $(empty)
-$(if $(findstring $(space),$(TOPDIR)),$(error ERROR: The path to the LEDE directory must not include any spaces))
+$(if $(findstring $(space),$(TOPDIR)),$(error ERROR: The path to the OpenWrt directory must not include any spaces))
 
 world:
 
diff --git a/README b/README
index 405c18b..864ea2f 100644
--- a/README
+++ b/README
@@ -1,4 +1,4 @@ 
-This is the buildsystem for the LEDE Linux distribution.
+This is the buildsystem for the OpenWrt Linux distribution.
 
 Please use "make menuconfig" to choose your preferred
 configuration for the toolchain and firmware.
@@ -23,7 +23,7 @@  the lack of case sensitiveness in the file system.
 
 
 Sunshine!
-	Your LEDE Community
-	http://www.lede-project.org
+	Your OpenWrt Community
+	http://www.openwrt.org
 
 
diff --git a/include/image-commands.mk b/include/image-commands.mk
index aaece70..3507578 100644
--- a/include/image-commands.mk
+++ b/include/image-commands.mk
@@ -7,7 +7,7 @@  define Build/uImage
 	mkimage -A $(LINUX_KARCH) \
 		-O linux -T kernel \
 		-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-		-n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION))' -d $@ $@.new
+		-n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION))' -d $@ $@.new
 	mv $@.new $@
 endef
 
@@ -60,7 +60,7 @@  endef
 
 define Build/netgear-dni
 	$(STAGING_DIR_HOST)/bin/mkdniimg \
-		-B $(NETGEAR_BOARD_ID) -v LEDE.$(REVISION) \
+		-B $(NETGEAR_BOARD_ID) -v OpenWrt.$(REVISION) \
 		$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
 		-r "$(1)" \
 		-i $@ -o $@.new
@@ -83,7 +83,7 @@  define Build/append-uImage-fakeroot-hdr
 	rm -f $@.fakeroot
 	$(STAGING_DIR_HOST)/bin/mkimage \
 		-A $(LINUX_KARCH) -O linux -T filesystem -C none \
-		-n '$(call toupper,$(LINUX_KARCH)) LEDE fakeroot' \
+		-n '$(call toupper,$(LINUX_KARCH)) OpenWrt fakeroot' \
 		-s \
 		$@.fakeroot
 	cat $@.fakeroot >> $@
diff --git a/include/image.mk b/include/image.mk
index fc6bf06..a1c3781 100644
--- a/include/image.mk
+++ b/include/image.mk
@@ -136,7 +136,7 @@  endef
 
 define Image/BuildKernel/MkuImage
 	mkimage -A $(ARCH) -O linux -T kernel -C $(1) -a $(2) -e $(3) \
-		-n '$(call toupper,$(ARCH)) LEDE Linux-$(LINUX_VERSION)' -d $(4) $(5)
+		-n '$(call toupper,$(ARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $(4) $(5)
 endef
 
 define Image/BuildKernel/MkFIT
diff --git a/include/prereq-build.mk b/include/prereq-build.mk
index 7d96921..0fab326 100644
--- a/include/prereq-build.mk
+++ b/include/prereq-build.mk
@@ -18,7 +18,7 @@  $(eval $(call TestHostCommand,working-make, \
 	$(MAKE) -v | grep -E 'Make (3\.8[1-9]|3\.9[0-9]|[4-9]\.)'))
 
 $(eval $(call TestHostCommand,case-sensitive-fs, \
-	LEDE can only be built on a case-sensitive filesystem, \
+	OpenWrt can only be built on a case-sensitive filesystem, \
 	rm -f $(TMP_DIR)/test.*; touch $(TMP_DIR)/test.fs; \
 		test ! -f $(TMP_DIR)/test.FS))
 
diff --git a/include/version.mk b/include/version.mk
index 1a0d3c9..321e0d1 100644
--- a/include/version.mk
+++ b/include/version.mk
@@ -40,17 +40,17 @@  VERSION_NICK:=$(call qstrip_escape,$(CONFIG_VERSION_NICK))
 VERSION_NICK:=$(if $(VERSION_NICK),$(VERSION_NICK),$(RELEASE))
 
 VERSION_REPO:=$(call qstrip_escape,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),http://downloads.lede-project.org/snapshots)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),http://downloads.openwrt.org/snapshots)
 
 VERSION_DIST:=$(call qstrip_escape,$(CONFIG_VERSION_DIST))
-VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),LEDE)
+VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)
 VERSION_DIST_SANITIZED:=$(call sanitize,$(VERSION_DIST))
 
 VERSION_MANUFACTURER:=$(call qstrip_escape,$(CONFIG_VERSION_MANUFACTURER))
-VERSION_MANUFACTURER:=$(if $(VERSION_MANUFACTURER),$(VERSION_MANUFACTURER),LEDE)
+VERSION_MANUFACTURER:=$(if $(VERSION_MANUFACTURER),$(VERSION_MANUFACTURER),OpenWrt)
 
 VERSION_MANUFACTURER_URL:=$(call qstrip_escape,$(CONFIG_VERSION_MANUFACTURER_URL))
-VERSION_MANUFACTURER_URL:=$(if $(VERSION_MANUFACTURER_URL),$(VERSION_MANUFACTURER_URL),http://lede-project.org/)
+VERSION_MANUFACTURER_URL:=$(if $(VERSION_MANUFACTURER_URL),$(VERSION_MANUFACTURER_URL),http://openwrt.org/)
 
 VERSION_BUG_URL:=$(call qstrip_escape,$(CONFIG_VERSION_BUG_URL))
 VERSION_BUG_URL:=$(if $(VERSION_BUG_URL),$(VERSION_BUG_URL),http://bugs.lede-project.org/)
diff --git a/package/base-files/Makefile b/package/base-files/Makefile
index 216e457..a5511c4 100644
--- a/package/base-files/Makefile
+++ b/package/base-files/Makefile
@@ -34,7 +34,7 @@  define Package/base-files
   SECTION:=base
   CATEGORY:=Base system
   DEPENDS:=+netifd +libc +procd +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:lede-keyring +NAND_SUPPORT:ubi-utils +fstools +fwtool
-  TITLE:=Base filesystem for Lede
+  TITLE:=Base filesystem for OpenWrt
   URL:=http://openwrt.org/
   VERSION:=$(PKG_RELEASE)-$(REVISION)
 endef
diff --git a/package/base-files/files/bin/config_generate b/package/base-files/files/bin/config_generate
index a8311fc..bbed567 100755
--- a/package/base-files/files/bin/config_generate
+++ b/package/base-files/files/bin/config_generate
@@ -223,7 +223,7 @@  generate_static_system() {
 	uci -q batch <<-EOF
 		delete system.@system[0]
 		add system system
-		set system.@system[-1].hostname='LEDE'
+		set system.@system[-1].hostname='OpenWrt'
 		set system.@system[-1].timezone='UTC'
 		set system.@system[-1].ttylogin='0'
 		set system.@system[-1].log_size='64'
@@ -233,10 +233,10 @@  generate_static_system() {
 		set system.ntp='timeserver'
 		set system.ntp.enabled='1'
 		set system.ntp.enable_server='0'
-		add_list system.ntp.server='0.lede.pool.ntp.org'
-		add_list system.ntp.server='1.lede.pool.ntp.org'
-		add_list system.ntp.server='2.lede.pool.ntp.org'
-		add_list system.ntp.server='3.lede.pool.ntp.org'
+		add_list system.ntp.server='0.openwrt.pool.ntp.org'
+		add_list system.ntp.server='1.openwrt.pool.ntp.org'
+		add_list system.ntp.server='2.openwrt.pool.ntp.org'
+		add_list system.ntp.server='3.openwrt.pool.ntp.org'
 	EOF
 
 	if json_is_a system object; then
diff --git a/package/base-files/files/etc/banner b/package/base-files/files/etc/banner
index 4ec646a..a951728 100644
--- a/package/base-files/files/etc/banner
+++ b/package/base-files/files/etc/banner
@@ -1,10 +1,13 @@ 
-     _________
-    /        /\      _    ___ ___  ___
-   /  LE    /  \    | |  | __|   \| __|
-  /    DE  /    \   | |__| _|| |) | _|
- /________/  LE  \  |____|___|___/|___|                      lede-project.org
- \        \   DE /
-  \    LE  \    /  -----------------------------------------------------------
-   \  DE    \  /    %N (%V, %C)
-    \________\/    -----------------------------------------------------------
-
+  _______                     ________        __
+ |       |.-----.-----.-----.|  |  |  |.----.|  |_
+ |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
+ |_______||   __|_____|__|__||________||__|  |____|
+          |__| W I R E L E S S   F R E E D O M
+ -----------------------------------------------------
+ %N (%V, %C)
+ -----------------------------------------------------
+  * 2 oz. Orange Juice         Combine all juices in a
+  * 2 oz. Pineapple Juice      tall glass filled with
+  * 2 oz. Grapefruit Juice     ice, stir well.
+  * 2 oz. Cranberry Juice
+ -----------------------------------------------------
diff --git a/package/base-files/files/etc/init.d/system b/package/base-files/files/etc/init.d/system
index 8c5f677..531aa8c 100755
--- a/package/base-files/files/etc/init.d/system
+++ b/package/base-files/files/etc/init.d/system
@@ -7,7 +7,7 @@  USE_PROCD=1
 validate_system_section()
 {
 	uci_validate_section system system "${1}" \
-		'hostname:string:lede' \
+		'hostname:string:OpenWrt' \
 		'conloglevel:uinteger' \
 		'buffersize:uinteger' \
 		'timezone:string:UTC' \
diff --git a/package/base-files/files/lib/preinit/10_indicate_preinit b/package/base-files/files/lib/preinit/10_indicate_preinit
index 5442a74..c3ec7bf 100644
--- a/package/base-files/files/lib/preinit/10_indicate_preinit
+++ b/package/base-files/files/lib/preinit/10_indicate_preinit
@@ -113,7 +113,7 @@  preinit_ip() {
 		preinit_config_board
 	fi
 
-	preinit_net_echo "Doing Lede Preinit\n"
+	preinit_net_echo "Doing OpenWrt Preinit\n"
 }
 
 preinit_ip_deconfig() {
diff --git a/package/base-files/image-config.in b/package/base-files/image-config.in
index 87d2ac6..824427b 100644
--- a/package/base-files/image-config.in
+++ b/package/base-files/image-config.in
@@ -158,7 +158,7 @@  if VERSIONOPT
 	config VERSION_DIST
 		string
 		prompt "Release distribution"
-		default "LEDE"
+		default "OpenWrt"
 		help
 			This is the name of the release distribution.
 			If unspecified, it defaults to OpenWrt.
@@ -190,7 +190,7 @@  if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "http://downloads.lede-project.org/snapshots"
+		default "http://downloads.openwrt.org/snapshots"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:
@@ -201,13 +201,13 @@  if VERSIONOPT
 			 %c .. Configured release revision code or value of %R, lowercase
 			 %N .. Release name, uppercase
 			 %n .. Release name, lowercase
-			 %D .. Distribution name or "Lede", uppercase
-			 %d .. Distribution name or "lede", lowercase
+			 %D .. Distribution name or "OpenWrt", uppercase
+			 %d .. Distribution name or "openwrt", lowercase
 			 %T .. Target name
 			 %S .. Target/Subtarget name
 			 %A .. Package architecture
 			 %t .. Build taint flags, e.g. "no-all busybox"
-			 %M .. Manufacturer name or "Lede"
+			 %M .. Manufacturer name or "OpenWrt"
 			 %P .. Product name or "Generic"
 			 %h .. Hardware revision or "v0"
 
diff --git a/package/boot/uboot-layerscape-armv8_32b/Makefile b/package/boot/uboot-layerscape-armv8_32b/Makefile
index d204a30..d221e7d 100644
--- a/package/boot/uboot-layerscape-armv8_32b/Makefile
+++ b/package/boot/uboot-layerscape-armv8_32b/Makefile
@@ -12,7 +12,7 @@  PKG_VERSION:=2017.09
 PKG_RELEASE:=1
 
 # Layerscape ARMv8 platforms use 64-bit u-boot to support both 32-bit and 64-bit
-# kernel/rootfs. Since LEDE could only provide 32-bit toolchain for 32-bit targets,
+# kernel/rootfs. Since OpenWrt could only provide 32-bit toolchain for 32-bit targets,
 # 64-bit u-boot images git tree is provided here whose source code actually is
 # uboot-layerscape's source code.
 PKG_SOURCE_PROTO:=git
diff --git a/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh b/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh
index 2780fa1..3643f6b 100644
--- a/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh
+++ b/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh
@@ -469,7 +469,7 @@  detect_broadcom() {
 			set wireless.default_wl${i}.device=wl${i}
 			set wireless.default_wl${i}.network=lan
 			set wireless.default_wl${i}.mode=ap
-			set wireless.default_wl${i}.ssid=Lede${i#0}
+			set wireless.default_wl${i}.ssid=OpenWrt${i#0}
 			set wireless.default_wl${i}.encryption=none
 EOF
 		uci -q commit wireless
diff --git a/package/kernel/mac80211/files/lib/wifi/mac80211.sh b/package/kernel/mac80211/files/lib/wifi/mac80211.sh
index 940fb52..3540777 100644
--- a/package/kernel/mac80211/files/lib/wifi/mac80211.sh
+++ b/package/kernel/mac80211/files/lib/wifi/mac80211.sh
@@ -122,7 +122,7 @@  detect_mac80211() {
 			set wireless.default_radio${devidx}.device=radio${devidx}
 			set wireless.default_radio${devidx}.network=lan
 			set wireless.default_radio${devidx}.mode=ap
-			set wireless.default_radio${devidx}.ssid=LEDE
+			set wireless.default_radio${devidx}.ssid=OpenWrt
 			set wireless.default_radio${devidx}.encryption=none
 EOF
 		uci -q commit wireless
diff --git a/package/network/services/hostapd/files/hostapd.sh b/package/network/services/hostapd/files/hostapd.sh
index 16925d5..6b2d733 100644
--- a/package/network/services/hostapd/files/hostapd.sh
+++ b/package/network/services/hostapd/files/hostapd.sh
@@ -356,8 +356,8 @@  hostapd_set_bss_options() {
 	[ -n "$wps_possible" -a -n "$config_methods" ] && {
 		set_default ext_registrar 0
 		set_default wps_device_type "6-0050F204-1"
-		set_default wps_device_name "Lede AP"
-		set_default wps_manufacturer "www.lede-project.org"
+		set_default wps_device_name "OpenWrt AP"
+		set_default wps_manufacturer "www.openwrt.org"
 		set_default wps_independent 1
 
 		wps_state=2
diff --git a/package/network/services/lldpd/files/lldpd.config b/package/network/services/lldpd/files/lldpd.config
index d2b3d15..36b43c8 100644
--- a/package/network/services/lldpd/files/lldpd.config
+++ b/package/network/services/lldpd/files/lldpd.config
@@ -10,7 +10,7 @@  config lldpd config
 	option lldp_location "2:FR:6:Commercial Rd:3:Roseville:19:4"
 
 	# if empty, the distribution description is sent
-	#option lldp_description "Lede System"
+	#option lldp_description "OpenWrt System"
 
 	# interfaces to listen on
 	list interface "loopback"
diff --git a/package/network/services/lldpd/files/lldpd.init b/package/network/services/lldpd/files/lldpd.init
index 39bce98..c3d9ba0 100644
--- a/package/network/services/lldpd/files/lldpd.init
+++ b/package/network/services/lldpd/files/lldpd.init
@@ -16,7 +16,7 @@  find_release_info()
 	[ -z "$PRETTY_NAME" ] && [ -s /etc/openwrt_version ] && \
 		PRETTY_NAME="$(cat /etc/openwrt_version)"
 
-	echo "${PRETTY_NAME:-Unknown Lede release} @ $(cat /proc/sys/kernel/hostname)"
+	echo "${PRETTY_NAME:-Unknown OpenWrt release} @ $(cat /proc/sys/kernel/hostname)"
 }
 
 write_lldpd_conf()
diff --git a/package/network/services/samba36/files/samba.config b/package/network/services/samba36/files/samba.config
index b34a8dc..c79db0d 100644
--- a/package/network/services/samba36/files/samba.config
+++ b/package/network/services/samba36/files/samba.config
@@ -1,6 +1,6 @@ 
 config samba
-	option 'name'			'Lede'
+	option 'name'			'OpenWrt'
 	option 'workgroup'		'WORKGROUP'
-	option 'description'		'Lede'
+	option 'description'		'OpenWrt'
 	option 'homes'			'1'
 
diff --git a/package/network/services/samba36/files/samba.init b/package/network/services/samba36/files/samba.init
index 28b0064..ae0e0e2 100755
--- a/package/network/services/samba36/files/samba.init
+++ b/package/network/services/samba36/files/samba.init
@@ -23,9 +23,9 @@  smb_header() {
 	local name workgroup description charset
 	local hostname="$(uci_get system.@system[0].hostname)"
 
-	config_get name        $1 name        "${hostname:-Lede}"
-	config_get workgroup   $1 workgroup   "${hostname:-Lede}"
-	config_get description $1 description "Samba on ${hostname:-Lede}"
+	config_get name        $1 name        "${hostname:-OpenWrt}"
+	config_get workgroup   $1 workgroup   "${hostname:-OpenWrt}"
+	config_get description $1 description "Samba on ${hostname:-OpenWrt}"
 	config_get charset     $1 charset     "UTF-8"
 
 	mkdir -p /var/etc
diff --git a/package/network/services/uhttpd/files/uhttpd.config b/package/network/services/uhttpd/files/uhttpd.config
index 563c079..a7d769e 100644
--- a/package/network/services/uhttpd/files/uhttpd.config
+++ b/package/network/services/uhttpd/files/uhttpd.config
@@ -83,7 +83,7 @@  config uhttpd main
 	option tcp_keepalive	1
 
 	# Basic auth realm, defaults to local hostname
-#	option realm	Lede
+#	option realm	OpenWrt
 
 	# Configuration file in busybox httpd format
 #	option config	/etc/httpd.conf
diff --git a/package/network/services/uhttpd/files/uhttpd.init b/package/network/services/uhttpd/files/uhttpd.init
index 6b8be1c..47270bc 100755
--- a/package/network/services/uhttpd/files/uhttpd.init
+++ b/package/network/services/uhttpd/files/uhttpd.init
@@ -52,7 +52,7 @@  generate_keys() {
 	[ -n "$GENKEY_CMD" ] && {
 		$GENKEY_CMD \
 			-days ${days:-730} -newkey rsa:${bits:-2048} -keyout "${UHTTPD_KEY}.new" -out "${UHTTPD_CERT}.new" \
-			-subj /C="${country:-DE}"/ST="${state:-Saxony}"/L="${location:-Leipzig}"/O="${commonname:-Lede}$UNIQUEID"/CN="${commonname:-Lede}"
+			-subj /C="${country:-ZZ}"/ST="${state:-Somewhere}"/L="${location:-Unknown}"/O="${commonname:-OpenWrt}$UNIQUEID"/CN="${commonname:-OpenWrt}"
 		sync
 		mv "${UHTTPD_KEY}.new" "${UHTTPD_KEY}"
 		mv "${UHTTPD_CERT}.new" "${UHTTPD_CERT}"
diff --git a/package/network/utils/iproute2/Makefile b/package/network/utils/iproute2/Makefile
index 14a33c5..c9ef626 100644
--- a/package/network/utils/iproute2/Makefile
+++ b/package/network/utils/iproute2/Makefile
@@ -108,7 +108,7 @@  define Build/Configure
 		$(PKG_BUILD_DIR)/Makefile
 	$(SED) "s,^LIBC_INCLUDE.*,LIBC_INCLUDE=$(STAGING_DIR)/include," \
 		$(PKG_BUILD_DIR)/Makefile
-	echo "static const char SNAPSHOT[] = \"$(PKG_VERSION)-$(PKG_RELEASE)-lede\";" \
+	echo "static const char SNAPSHOT[] = \"$(PKG_VERSION)-$(PKG_RELEASE)-openwrt\";" \
 		> $(PKG_BUILD_DIR)/include/SNAPSHOT.h
 endef
 
diff --git a/package/utils/busybox/Config-defaults.in b/package/utils/busybox/Config-defaults.in
index 79059e5..2a8d9dd 100644
--- a/package/utils/busybox/Config-defaults.in
+++ b/package/utils/busybox/Config-defaults.in
@@ -2332,10 +2332,10 @@  config BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG
 config BUSYBOX_DEFAULT_NSLOOKUP
 	bool
 	default n
-config BUSYBOX_DEFAULT_NSLOOKUP_LEDE
+config BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT
 	bool
 	default y
-config BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS
+config BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
 	bool
 	default n
 config BUSYBOX_DEFAULT_NTPD
diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in
index 14875d5..2d2a1c4 100644
--- a/package/utils/busybox/config/networking/Config.in
+++ b/package/utils/busybox/config/networking/Config.in
@@ -700,17 +700,17 @@  config BUSYBOX_CONFIG_NSLOOKUP
 	default BUSYBOX_DEFAULT_NSLOOKUP
 	help
 	  nslookup is a tool to query Internet name servers.
-config BUSYBOX_CONFIG_NSLOOKUP_LEDE
+config BUSYBOX_CONFIG_NSLOOKUP_OPENWRT
 	bool "nslookup_lede"
 	depends on !BUSYBOX_CONFIG_NSLOOKUP
-	default BUSYBOX_DEFAULT_NSLOOKUP_LEDE
+	default BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT
 	help
-	  nslookup is a tool to query Internet name servers (LEDE flavor).
+	  nslookup is a tool to query Internet name servers (OpenWrt flavor).
 
-config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS
+config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
        bool "Enable long options"
-       default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS
-       depends on BUSYBOX_CONFIG_NSLOOKUP_LEDE && BUSYBOX_CONFIG_LONG_OPTS
+       default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
+       depends on BUSYBOX_CONFIG_NSLOOKUP_OPENWRT && BUSYBOX_CONFIG_LONG_OPTS
        help
          Support long options for the nslookup applet.
 config BUSYBOX_CONFIG_NTPD
diff --git a/package/utils/busybox/patches/230-add_nslookup_lede.patch b/package/utils/busybox/patches/230-add_nslookup_lede.patch
index e394dfb..14c0e87 100644
--- a/package/utils/busybox/patches/230-add_nslookup_lede.patch
+++ b/package/utils/busybox/patches/230-add_nslookup_lede.patch
@@ -53,23 +53,23 @@  Signed-off-by: Jo-Philipp Wich <jo@mein.io>
 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 + */
 +
-+//config:config NSLOOKUP_LEDE
-+//config:	bool "nslookup_lede"
++//config:config NSLOOKUP_OPENWRT
++//config:	bool "nslookup_openwrt"
 +//config:	depends on !NSLOOKUP
 +//config:	default y
 +//config:	help
 +//config:	  nslookup is a tool to query Internet name servers (LEDE flavor).
 +//config:
-+//config:config FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS
++//config:config FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
 +//config:       bool "Enable long options"
 +//config:       default y
-+//config:       depends on NSLOOKUP_LEDE && LONG_OPTS
++//config:       depends on NSLOOKUP_OPENWRT && LONG_OPTS
 +//config:       help
 +//config:         Support long options for the nslookup applet.
 +
-+//applet:IF_NSLOOKUP_LEDE(APPLET(nslookup, BB_DIR_USR_BIN, BB_SUID_DROP))
++//applet:IF_NSLOOKUP_OPENWRT(APPLET(nslookup, BB_DIR_USR_BIN, BB_SUID_DROP))
 +
-+//kbuild:lib-$(CONFIG_NSLOOKUP_LEDE) += nslookup_lede.o
++//kbuild:lib-$(CONFIG_NSLOOKUP_OPENWRT) += nslookup_lede.o
 +
 +//usage:#define nslookup_lede_trivial_usage
 +//usage:       "[HOST] [SERVER]"
@@ -753,7 +753,7 @@  Signed-off-by: Jo-Philipp Wich <jo@mein.io>
 +}
 +
 +
-+#if ENABLE_FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS
++#if ENABLE_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
 +static const char nslookup_longopts[] ALIGN1 =
 +		"type\0"		Required_argument	"q"
 +		"querytype\0"	Required_argument	"q"
@@ -778,7 +778,7 @@  Signed-off-by: Jo-Philipp Wich <jo@mein.io>
 +	unsigned int types = 0;
 +	HEADER *header;
 +
-+#if ENABLE_FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS
++#if ENABLE_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
 +	applet_long_options = nslookup_longopts;
 +#endif
 +
diff --git a/package/utils/ct-bugcheck/src/bugcheck.sh b/package/utils/ct-bugcheck/src/bugcheck.sh
index 85f70c5..64e96b6 100755
--- a/package/utils/ct-bugcheck/src/bugcheck.sh
+++ b/package/utils/ct-bugcheck/src/bugcheck.sh
@@ -11,7 +11,7 @@  FOUND_BUG=0
 
 bugcheck_generic()
 {
-    echo "LEDE crashlog report" > $CRASHDIR/info.txt
+    echo "OpenWrt crashlog report" > $CRASHDIR/info.txt
     date >> $CRASHDIR/info.txt
     echo >> $CRASHDIR/info.txt
     echo "uname" >> $CRASHDIR/info.txt
@@ -89,7 +89,7 @@  do
 	  echo "https://github.com/greearb/ath10k-ct/issues" >> $CRASHDIR/report_to.txt
       else
 	  # Not sure who would want these bug reports for upstream...
-	  echo "https://www.lede-project.org/" >> $CRASHDIR/report_to.txt
+	  echo "https://www.openwrt.org/" >> $CRASHDIR/report_to.txt
       fi
       echo >> $CRASHDIR/report_to.txt
       echo "Please attach all files in this directory to bug reports." >> $CRASHDIR/report_to.txt
diff --git a/scripts/brcmImage.pl b/scripts/brcmImage.pl
index aab86d6..60a59f2 100755
--- a/scripts/brcmImage.pl
+++ b/scripts/brcmImage.pl
@@ -33,7 +33,7 @@  use Compress::Zlib;
 my $version = "0.1";
 my %arg = (
 	o => 'bcm963xx_fs_kernel',
-	b => 'LEDE',
+	b => 'OpenWrt',
 	c => '6348',
 	s => 64,
 	f => 0xbfc00000,
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 05fd772..5224ea4 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -174,7 +174,7 @@  if ($tree) {
 	}
 
 	if (!defined $root) {
-		print "Must be run from the top-level dir. of a LEDE tree\n";
+		print "Must be run from the top-level dir. of a OpenWrt tree\n";
 		exit(2);
 	}
 }
diff --git a/scripts/config/mconf.c b/scripts/config/mconf.c
index c366e21..540fa91 100644
--- a/scripts/config/mconf.c
+++ b/scripts/config/mconf.c
@@ -25,7 +25,7 @@ 
 static const char mconf_readme[] = N_(
 "Overview\n"
 "--------\n"
-"Some LEDE features may be built directly into the image.\n"
+"Some OpenWrt features may be built directly into the image.\n"
 "Some may be made into installable ipkg packages. Some features\n"
 "may be completely removed altogether.\n"
 "\n"
diff --git a/scripts/qemustart b/scripts/qemustart
index 5cadd7d..6c2254e 100755
--- a/scripts/qemustart
+++ b/scripts/qemustart
@@ -107,8 +107,8 @@  Examples
   $SELF malta le64
   $SELF malta be-glibc
   $SELF armvirt 32 \\
-                --kernel bin/targets/armvirt/32/lede-armvirt-32-zImage \\
-                --rootfs bin/targets/armvirt/32/lede-armvirt-32-root.ext4
+                --kernel bin/targets/armvirt/32/openwrt-armvirt-32-zImage \\
+                --rootfs bin/targets/armvirt/32/openwrt-armvirt-32-root.ext4
 EOF
 }
 
@@ -158,12 +158,12 @@  start_qemu_armvirt() {
 		32)
 			qemu_exe="qemu-system-arm"
 			cpu="cortex-a15"
-			[ -n "$kernel" ] || kernel="$o_bindir/lede-$o_target-${o_subtarget%-*}-zImage-initramfs"
+			[ -n "$kernel" ] || kernel="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-zImage-initramfs"
 			;;
 		64)
 			qemu_exe="qemu-system-aarch64"
 			cpu="cortex-a57"
-			[ -n "$kernel" ] || kernel="$o_bindir/lede-$o_target-${o_subtarget%-*}-Image-initramfs"
+			[ -n "$kernel" ] || kernel="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-Image-initramfs"
 			;;
 		*)
 			__errmsg "target $o_target: unknown subtarget $o_subtarget"
@@ -199,7 +199,7 @@  start_qemu_malta() {
 	[ "$(echo "$o_subtarget" | grep -o '^..')" = "le" ] && isel="el"
 	qemu_exe="qemu-system-mips$is64$isel"
 
-	[ -n "$kernel" ] || kernel="$o_bindir/lede-malta-${o_subtarget%-*}-vmlinux-initramfs.elf"
+	[ -n "$kernel" ] || kernel="$o_bindir/openwrt-malta-${o_subtarget%-*}-vmlinux-initramfs.elf"
 
 	# NOTE: order of wan, lan -device arguments matters as it will affect which
 	# one will be actually used as the wan, lan network interface inside the
@@ -216,7 +216,7 @@  start_qemu_x86() {
 	local qemu_exe
 
 	[ -n "$rootfs" ] || {
-		rootfs="$o_bindir/lede-$o_target-${o_subtarget%-*}-combined-ext4.img"
+		rootfs="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-combined-ext4.img"
 		if [ ! -f "$rootfs" -a -s "$rootfs.gz" ]; then
 			gunzip "$rootfs.gz"
 		fi
diff --git a/target/imagebuilder/Config.in b/target/imagebuilder/Config.in
index 49bb741..c1a5212 100644
--- a/target/imagebuilder/Config.in
+++ b/target/imagebuilder/Config.in
@@ -1,5 +1,5 @@ 
 config IB
-	bool "Build the LEDE Image Builder"
+	bool "Build the OpenWrt Image Builder"
 	depends on !EXTERNAL_TOOLCHAIN
 	default BUILDBOT
 	help
diff --git a/target/imagebuilder/files/repositories.conf b/target/imagebuilder/files/repositories.conf
index 93ed97b..8f1f27f 100644
--- a/target/imagebuilder/files/repositories.conf
+++ b/target/imagebuilder/files/repositories.conf
@@ -1,4 +1,4 @@ 
 ## Place your custom repositories here, they must match the architecture and version.
 # src/gz %n %U
-# src custom file:///usr/src/lede/bin/%T/packages
+# src custom file:///usr/src/openwrt/bin/%T/packages
 
diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile
index 6ed183c..ee85292 100644
--- a/target/linux/apm821xx/image/Makefile
+++ b/target/linux/apm821xx/image/Makefile
@@ -116,7 +116,7 @@  define Build/create-uImage-dtb
 	# flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
 	-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
 		-O linux -T kernel -C none \
-		-n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' \
+		-n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' \
 		-d $(IMAGE_KERNEL).dtb $@.new
 	@mv $@.new $@
 endef
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 3c5fcc3..06538c3 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -12,7 +12,7 @@  define Build/mkwrggimg
 	$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
 		-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
 		-m $(BOARDNAME) -s $(DAP_SIGNATURE) \
-		-v LEDE -B $(REVISION)
+		-v OpenWrt -B $(REVISION)
 	mv $@.imghdr $@
 endef
 
@@ -66,7 +66,7 @@  define Build/uImageHiWiFi
 	mkimage -A $(LINUX_KARCH) \
 		-O linux -T kernel \
 		-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-		-n 'tw150v1 $(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
+		-n 'tw150v1 $(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
 	@mv $@.new $@
 endef
 
diff --git a/target/linux/ar71xx/image/legacy.mk b/target/linux/ar71xx/image/legacy.mk
index 701116b..01d7e50 100644
--- a/target/linux/ar71xx/image/legacy.mk
+++ b/target/linux/ar71xx/image/legacy.mk
@@ -485,11 +485,11 @@  define Image/Build/Belkin
 	$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
 	$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
 	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
-		edimax_fw_header -m $(5) -v "$(shell echo -n LEDE$(REVISION) | cut -c -13)" \
+		edimax_fw_header -m $(5) -v "$(shell echo -n OpenWrt$(REVISION) | cut -c -13)" \
 			-n "uImage" \
 			-i $(KDIR_TMP)/vmlinux-$(2).uImage \
 			-o $(KDIR_TMP)/$(2)-uImage; \
-		edimax_fw_header -m $(5) -v "$(shell echo -n LEDE$(REVISION) | cut -c -13)" \
+		edimax_fw_header -m $(5) -v "$(shell echo -n OpenWrt$(REVISION) | cut -c -13)" \
 			-n "rootfs" \
 			-i $(KDIR)/root.$(1) \
 			-o $(KDIR_TMP)/$(2)-rootfs; \
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index b7689c2..5122880 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -39,7 +39,7 @@  define Build/uImageArcher
 	mkimage -A $(LINUX_KARCH) \
 		-O linux -T kernel \
 		-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-		-n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
+		-n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
 	@mv $@.new $@
 endef
 
diff --git a/target/linux/armvirt/README b/target/linux/armvirt/README
index fba71a6..ae0d2ad 100644
--- a/target/linux/armvirt/README
+++ b/target/linux/armvirt/README
@@ -4,18 +4,18 @@  QEMU ARM virt machine.
 Run with qemu-system-arm
 
 	# boot with initramfs embedded in
-	qemu-system-arm -nographic -M virt -m 64 -kernel lede-armvirt-32-zImage-initramfs
+	qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage-initramfs
 
 	# boot with accel=kvm
 	qemu-system-arm -nographic -M virt,accel=kvm -cpu host -m 64 -kernel
-	lede-armvirt-32-zImage-initramfs
+	openwrt-armvirt-32-zImage-initramfs
 
 	# boot with a separate rootfs
-	qemu-system-arm -nographic -M virt -m 64 -kernel lede-armvirt-32-zImage \
-	  -drive file=lede-armvirt-32-root.ext4,format=raw,if=virtio -append 'root=/dev/vda rootwait'
+	qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage \
+	  -drive file=openwrt-armvirt-32-root.ext4,format=raw,if=virtio -append 'root=/dev/vda rootwait'
 
 	# boot with local dir as rootfs
-	qemu-system-arm -nographic -M virt -m 64 -kernel lede-armvirt-32-zImage \
+	qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage \
 	  -fsdev local,id=rootdev,path=root-armvirt/,security_model=none \
 	  -device virtio-9p-pci,fsdev=rootdev,mount_tag=/dev/root \
 	  -append 'rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p'
@@ -23,10 +23,10 @@  Run with qemu-system-arm
 Run with kvmtool
 
 	# start a named machine
-	lkvm run -k lede-armvirt-32-zImage -i lede-armvirt-32-rootfs.cpio --name armvirt0
+	lkvm run -k openwrt-armvirt-32-zImage -i openwrt-armvirt-32-rootfs.cpio --name armvirt0
 
 	# start with virtio-9p rootfs
-	lkvm run -k lede-armvirt-32-zImage -d root-armvirt/
+	lkvm run -k openwrt-armvirt-32-zImage -d root-armvirt/
 
 	# stop "armvirt0"
 	lkvm stop --name armvirt0
@@ -37,4 +37,4 @@  Run with kvmtool
 The multi-platform ARMv8 target can be used with QEMU:
 
 	qemu-system-aarch64 -machine virt -cpu cortex-a57 -nographic \
-		-kernel lede-armvirt-64-Image-initramfs \
+		-kernel openwrt-armvirt-64-Image-initramfs \
diff --git a/target/linux/brcm63xx/image/bcm63xx.mk b/target/linux/brcm63xx/image/bcm63xx.mk
index 6ad15a2..4e90eb0 100644
--- a/target/linux/brcm63xx/image/bcm63xx.mk
+++ b/target/linux/brcm63xx/image/bcm63xx.mk
@@ -978,7 +978,7 @@  define Device/NEUFBOX4-SER
   DEVICE_DTS := nb4-ser-r0
   CFE_BOARD_ID := 96358VW
   CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
+  CFE_EXTRAS += --rsa-signature "OpenWrt-$(firstword $(subst -,$(space),$(REVISION)))"
   DEVICE_PACKAGES := \
     $(B43_PACKAGES) $(USB2_PACKAGES)
 endef
@@ -990,7 +990,7 @@  define Device/NEUFBOX4-FXC
   DEVICE_DTS := nb4-fxc-r1
   CFE_BOARD_ID := 96358VW
   CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
+  CFE_EXTRAS += --rsa-signature "OpenWrt-$(firstword $(subst -,$(space),$(REVISION)))"
   DEVICE_PACKAGES := \
     $(B43_PACKAGES) $(USB2_PACKAGES)
 endef
@@ -1002,7 +1002,7 @@  define Device/NEUFBOX6
   DEVICE_DTS := nb6-ser-r0
   CFE_BOARD_ID := NB6-SER-r0
   CFE_CHIP_ID := 6362
-  CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
+  CFE_EXTRAS += --rsa-signature "OpenWrt-$(firstword $(subst -,$(space),$(REVISION)))"
   DEVICE_PACKAGES := \
     $(B43_PACKAGES) $(USB2_PACKAGES)
 endef
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 9326c62..f6795ee 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -39,7 +39,7 @@  endef
 
 define Build/fullimage
 	mkimage -A mips -O linux -C lzma -T filesystem -a 0x00  \
-		-e 0x00 -n 'LEDE RootFS' \
+		-e 0x00 -n 'OpenWrt RootFS' \
 		-d $(IMAGE_ROOTFS) $(IMAGE_ROOTFS).new
 
 	cat $(IMAGE_KERNEL) $(IMAGE_ROOTFS).new > $@.tmp
diff --git a/target/linux/mcs814x/image/Makefile b/target/linux/mcs814x/image/Makefile
index 7be7f8c..3afd660 100644
--- a/target/linux/mcs814x/image/Makefile
+++ b/target/linux/mcs814x/image/Makefile
@@ -20,7 +20,7 @@  UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
 
 define Image/Build/MkuImage
 	mkimage -A arm -O linux -T kernel -a $(LOADADDR) -C none -e $(LOADADDR) \
-	-n 'ARM LEDE Linux-$(LINUX_VERSION)' -d $(1) $(2);
+	-n 'ARM OpenWrt Linux-$(LINUX_VERSION)' -d $(1) $(2);
 endef
 
 define Image/Build/DTB
diff --git a/target/linux/mvebu/image/cfbase-boot.script b/target/linux/mvebu/image/cfbase-boot.script
index 5f9bcd7..89fa1dc 100644
--- a/target/linux/mvebu/image/cfbase-boot.script
+++ b/target/linux/mvebu/image/cfbase-boot.script
@@ -9,8 +9,8 @@  setenv fdtfile armada-388-clearfog-base.dtb
 
 # generate bootargs for rootfs on MMC
 if test "${devtype}" = "mmc"; then
-	setexpr lede_rootpart ${distro_bootpart} + 1
-	setenv bootargs ${bootargs} root=/dev/mmcblk${devnum}p${lede_rootpart} rootfstype=auto rootwait
+	setexpr openwrt_rootpart ${distro_bootpart} + 1
+	setenv bootargs ${bootargs} root=/dev/mmcblk${devnum}p${openwrt_rootpart} rootfstype=auto rootwait
 fi
 
 # here one could add logic for other rootfs device types such as scsi and usb
diff --git a/target/linux/mvebu/image/cfpro-boot.script b/target/linux/mvebu/image/cfpro-boot.script
index e1523f8..1588c15 100644
--- a/target/linux/mvebu/image/cfpro-boot.script
+++ b/target/linux/mvebu/image/cfpro-boot.script
@@ -5,8 +5,8 @@ 
 
 # generate bootargs for rootfs on MMC
 if test "${devtype}" = "mmc"; then
-	setexpr lede_rootpart ${distro_bootpart} + 1
-	setenv bootargs ${bootargs} root=/dev/mmcblk${devnum}p${lede_rootpart} rootfstype=auto rootwait
+	setexpr openwrt_rootpart ${distro_bootpart} + 1
+	setenv bootargs ${bootargs} root=/dev/mmcblk${devnum}p${openwrt_rootpart} rootfstype=auto rootwait
 fi
 
 # here one could add logic for other rootfs device types such as scsi and usb
diff --git a/target/linux/omap24xx/base-files/etc/config/wireless b/target/linux/omap24xx/base-files/etc/config/wireless
index f61721e..b640ce6 100644
--- a/target/linux/omap24xx/base-files/etc/config/wireless
+++ b/target/linux/omap24xx/base-files/etc/config/wireless
@@ -15,6 +15,6 @@  config wifi-iface
 	option powersave 1
 	option network  lan
 	option mode     sta
-	option ssid     LEDE
+	option ssid     OpenWrt
 #	option encryption psk2
 #	option key	"foobar"
diff --git a/target/linux/uml/README b/target/linux/uml/README
index d7cba1d..aa7bad9 100644
--- a/target/linux/uml/README
+++ b/target/linux/uml/README
@@ -1,4 +1,4 @@ 
-LEDE inside a user mode linux.  Why would we even want this many ask?
+OpenWrt inside a user mode linux.  Why would we even want this many ask?
 
 There are potentially a lot of reasons, one obvious one to me, it allows
 folks to 'kick the tires' without actually flashing up any hardware.  It's
@@ -17,7 +17,8 @@  build it all
 In your bin directory you will find a kernel and an ext4 root file system
 when it's finished.  Just run it like this:-
 
-bin/targets/uml/generic/lede-uml-vmlinux ubd0=bin/targets/uml/generic/lede-uml-ext4.img
+bin/targets/uml/generic/lede-uml-vmlinux
+ubd0=bin/targets/uml/generic/openwrt-uml-ext4.img
 
 The uml will start, and eventually the serial console of the uml will be at your
 console prompt.  If you would like it in xterms, substitute con=xterm and con0=xterm.
diff --git a/target/linux/x86/image/grub-iso.cfg b/target/linux/x86/image/grub-iso.cfg
index 32ee687..3d47a95 100644
--- a/target/linux/x86/image/grub-iso.cfg
+++ b/target/linux/x86/image/grub-iso.cfg
@@ -5,6 +5,6 @@  set default="0"
 set timeout="@TIMEOUT@"
 set root='(cd)'
 
-menuentry "LEDE" {
+menuentry "OpenWrt" {
 	linux /boot/vmlinuz @CMDLINE@ noinitrd
 }
diff --git a/target/linux/x86/image/grub.cfg b/target/linux/x86/image/grub.cfg
index acca036..9ec6b2d 100644
--- a/target/linux/x86/image/grub.cfg
+++ b/target/linux/x86/image/grub.cfg
@@ -5,9 +5,9 @@  set default="0"
 set timeout="@TIMEOUT@"
 set root='(@ROOT@)'
 
-menuentry "LEDE" {
+menuentry "OpenWrt" {
 	linux /boot/vmlinuz @CMDLINE@ noinitrd
 }
-menuentry "LEDE (failsafe)" {
+menuentry "OpenWrt (failsafe)" {
 	linux /boot/vmlinuz failsafe=true @CMDLINE@ noinitrd
 }
diff --git a/target/sdk/Config.in b/target/sdk/Config.in
index 095759d..0c8a61d 100644
--- a/target/sdk/Config.in
+++ b/target/sdk/Config.in
@@ -1,10 +1,10 @@ 
 config SDK
-	bool "Build the LEDE SDK"
+	bool "Build the OpenWrt SDK"
 	depends on !EXTERNAL_TOOLCHAIN
 	default BUILDBOT
 	help
 	  This is essentially a stripped-down version of the buildroot
 	  with a precompiled toolchain. It can be used to develop and
-	  test packages for LEDE before including them in the buildroot
+	  test packages for OpenWrt before including them in the buildroot
 
 
diff --git a/target/sdk/files/README.SDK b/target/sdk/files/README.SDK
index 6f04f94..6699dff 100644
--- a/target/sdk/files/README.SDK
+++ b/target/sdk/files/README.SDK
@@ -1,7 +1,7 @@ 
-This is the LEDE SDK. It contains a stripped-down version of
+This is the OpenWrt SDK. It contains a stripped-down version of
 the buildroot. You can use it to test/develop packages without
 having to compile your own toolchain or any of the libraries
-included with LEDE.
+included with OpenWrt.
 
 To use it, just put your buildroot-compatible package directory
 (including its dependencies) in the subdir 'package/' and run
diff --git a/target/toolchain/Config.in b/target/toolchain/Config.in
index e377c20..5a6ecef 100644
--- a/target/toolchain/Config.in
+++ b/target/toolchain/Config.in
@@ -1,8 +1,8 @@ 
 config MAKE_TOOLCHAIN
-	bool "Package the LEDE-based Toolchain"
+	bool "Package the OpenWrt-based Toolchain"
 	depends on !EXTERNAL_TOOLCHAIN
 	help
 	  Package the created toolchain as a tarball under the bin/ directory as
-	  LEDE-Toolchain-$(BOARD)-for-$(ARCH)$(ARCH_SUFFIX)-gcc-$(GCCV)$(DIR_SUFFIX).
+	  OpenWrt-Toolchain-$(BOARD)-for-$(ARCH)$(ARCH_SUFFIX)-gcc-$(GCCV)$(DIR_SUFFIX).
 	  For example, a toolchain for the MIPS architecture might be named
-	  LEDE-Toolchain-malta-for-mipsel_mips32-gcc-4.8-linaro_uClibc-0.9.33.2.tar.bz2.
+	  OpenWrt-Toolchain-malta-for-mipsel_mips32-gcc-4.8-linaro_uClibc-0.9.33.2.tar.bz2.
diff --git a/target/toolchain/files/README.TOOLCHAIN b/target/toolchain/files/README.TOOLCHAIN
index 86b0189..7c0586b 100644
--- a/target/toolchain/files/README.TOOLCHAIN
+++ b/target/toolchain/files/README.TOOLCHAIN
@@ -1,2 +1,2 @@ 
-This is the LEDE SDK. It contains just the toolchain created
+This is the OpenWrt SDK. It contains just the toolchain created
 by buildroot.
diff --git a/toolchain/gcc/common.mk b/toolchain/gcc/common.mk
index d7e205a..ac46563 100644
--- a/toolchain/gcc/common.mk
+++ b/toolchain/gcc/common.mk
@@ -53,8 +53,8 @@  endif
 
 PATCH_DIR=../patches/$(GCC_VERSION)
 
-BUGURL=http://www.lede-project.org/bugs/
-PKGVERSION=LEDE GCC $(PKG_VERSION) $(REVISION)
+BUGURL=http://www.openwrt.org/bugs/
+PKGVERSION=OpenWrt GCC $(PKG_VERSION) $(REVISION)
 
 HOST_BUILD_PARALLEL:=1