@@ -75,6 +75,10 @@ These nodes must have the following properties:
- reg: Specifies the base physical address and size of the ITS
registers.
+Optionally, an ITS node may have a sub-node describing a so-called pre-ITS:
+- compatible : Should contain "socionext,synquacer-pre-its"
+- reg : Specifies the base physical address and size of the pre-ITS window
+
The main GIC node must contain the appropriate #address-cells,
#size-cells and ranges properties for the reg property of all ITS
nodes.
@@ -539,6 +539,14 @@ config QCOM_QDF2400_ERRATUM_0065
If unsure, say Y.
+config SOCIONEXT_SYNQUACER_PREITS
+ bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
+ default y
+ help
+ Socionext Synquacer SoCs implement a separate h/w block to generate
+ MSI doorbell writes with non-zero values for the device ID.
+
+ If unsure, say Y.
endmenu
@@ -83,6 +83,8 @@ struct its_baser {
u32 psz;
};
+struct its_device;
+
/*
* The ITS structure - contains most of the infrastructure, with the
* top-level MSI domain, the command queue, the collections, and the
@@ -97,11 +99,15 @@ struct its_node {
struct its_cmd_block *cmd_write;
struct its_baser tables[GITS_BASER_NR_REGS];
struct its_collection *collections;
+ struct fwnode_handle *fwnode_handle;
+ u64 (*get_msi_base)(struct its_device *its_dev);
struct list_head its_device_list;
u64 flags;
u32 ite_size;
u32 device_ids;
int numa_node;
+ unsigned int msi_domain_flags;
+ u32 pre_its_base; /* for Socionext Synquacer */
bool is_v4;
};
@@ -1095,14 +1101,19 @@ static int its_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
return IRQ_SET_MASK_OK_DONE;
}
+static u64 its_irq_get_msi_base(struct its_device *its_dev)
+{
+ struct its_node *its = its_dev->its;
+
+ return its->phys_base + GITS_TRANSLATER;
+}
+
static void its_irq_compose_msi_msg(struct irq_data *d, struct msi_msg *msg)
{
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
- struct its_node *its;
u64 addr;
- its = its_dev->its;
- addr = its->phys_base + GITS_TRANSLATER;
+ addr = its_dev->its->get_msi_base(its_dev);
msg->address_lo = lower_32_bits(addr);
msg->address_hi = upper_32_bits(addr);
@@ -2758,6 +2769,54 @@ static bool __maybe_unused its_enable_quirk_qdf2400_e0065(void *data)
return true;
}
+static u64 its_irq_get_msi_base_pre_its(struct its_device *its_dev)
+{
+ struct its_node *its = its_dev->its;
+
+ /*
+ * The Socionext Synquacer SoC has a so-called 'pre-ITS',
+ * which maps 32-bit writes targeted at a separate window of
+ * size '4 << device_id_bits' onto writes to GITS_TRANSLATER
+ * with device ID taken from bits [device_id_bits + 1:2] of
+ * the window offset.
+ */
+ return its->pre_its_base + (its_dev->device_id << 2);
+}
+
+static bool __maybe_unused its_enable_quirk_socionext_synquacer(void *data)
+{
+ struct its_node *its = data;
+ struct device_node *its_np = to_of_node(its->fwnode_handle);
+ struct device_node *np;
+ struct resource res;
+ u32 ids;
+
+ if (!its_np)
+ return false;
+
+ for_each_child_of_node(its_np, np) {
+ if (!of_device_is_compatible(np, "socionext,synquacer-pre-its"))
+ continue;
+
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("pre-ITS window unspecified!\n");
+ return false;
+ }
+
+ its->pre_its_base = (u32)res.start;
+ its->get_msi_base = its_irq_get_msi_base_pre_its;
+
+ ids = ilog2(res.end - res.start + 1) - 2;
+ if (its->device_ids > ids)
+ its->device_ids = ids;
+
+ /* the pre-ITS breaks isolation, so disable MSI remapping */
+ its->msi_domain_flags &= ~IRQ_DOMAIN_FLAG_MSI_REMAP;
+ return true;
+ }
+ return false;
+}
+
static const struct gic_quirk its_quirks[] = {
#ifdef CONFIG_CAVIUM_ERRATUM_22375
{
@@ -2783,6 +2842,19 @@ static const struct gic_quirk its_quirks[] = {
.init = its_enable_quirk_qdf2400_e0065,
},
#endif
+#ifdef CONFIG_SOCIONEXT_SYNQUACER_PREITS
+ {
+ /*
+ * The Socionext Synquacer SoC incorporates ARM's own GIC-500
+ * implementation, but with a 'pre-ITS' added that requires
+ * special handling in software.
+ */
+ .desc = "ITS: Socionext Synquacer pre-ITS",
+ .iidr = 0x0001143b,
+ .mask = 0xffffffff,
+ .init = its_enable_quirk_socionext_synquacer,
+ },
+#endif
{
}
};
@@ -2811,7 +2883,7 @@ static int its_init_domain(struct fwnode_handle *handle, struct its_node *its)
inner_domain->parent = its_parent;
irq_domain_update_bus_token(inner_domain, DOMAIN_BUS_NEXUS);
- inner_domain->flags |= IRQ_DOMAIN_FLAG_MSI_REMAP;
+ inner_domain->flags |= its->msi_domain_flags;
info->ops = &its_msi_domain_ops;
info->data = its;
inner_domain->host_data = info;
@@ -2965,6 +3037,9 @@ static int __init its_probe_one(struct resource *res,
goto out_free_its;
}
its->cmd_write = its->cmd_base;
+ its->fwnode_handle = handle;
+ its->get_msi_base = its_irq_get_msi_base;
+ its->msi_domain_flags = IRQ_DOMAIN_FLAG_MSI_REMAP;
its_enable_quirks(its);
The Socionext Synquacer SoC's implementation of GICv3 has a so-called 'pre-ITS', which maps 32-bit writes targeted at a separate window of size '4 << device_id_bits' onto writes to GITS_TRANSLATER with device ID taken from bits [device_id_bits + 1:2] of the window offset. Writes that target GITS_TRANSLATER directly are reported as originating from device ID #0. So add a workaround for this. Given that this breaks isolation, clear the IRQ_DOMAIN_FLAG_MSI_REMAP flag as well. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt | 4 + arch/arm64/Kconfig | 8 ++ drivers/irqchip/irq-gic-v3-its.c | 83 +++++++++++++++++++- 3 files changed, 91 insertions(+), 4 deletions(-)