diff mbox series

[v2,09/16] serial: mvebu-uart: add TX interrupt trigger for pulse interrupts

Message ID 20171013090200.31034-10-miquel.raynal@free-electrons.com
State New
Headers show
Series Support armada-37xx second UART port | expand

Commit Message

Miquel Raynal Oct. 13, 2017, 9:01 a.m. UTC 
From: Allen Yan <yanwei@marvell.com>

Pulse interrupts (extended UART only) needs a change of state to trigger
the TX interrupt. In addition to enabling the TX_READY_INT_EN flag,
produce a FIFO state change from 'empty' to 'not full'. For this, write
only one data byte in TX start, making the TX FIFO not empty, and wait
for the TX interrupt to continue the transfer.

Signed-off-by: Allen Yan <yanwei@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/tty/serial/mvebu-uart.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 6bd0c40008bb..e52248ec2689 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -165,8 +165,16 @@  static void mvebu_uart_stop_tx(struct uart_port *port)
 
 static void mvebu_uart_start_tx(struct uart_port *port)
 {
-	unsigned int ctl = readl(port->membase + UART_INTR(port));
+	unsigned int ctl;
+	struct circ_buf *xmit = &port->state->xmit;
 
+	if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) {
+		writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port));
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	ctl = readl(port->membase + UART_INTR(port));
 	ctl |= CTRL_TX_RDY_INT(port);
 	writel(ctl, port->membase + UART_INTR(port));
 }