new file mode 100644
@@ -0,0 +1,40 @@
+# Minimal SD card image for the Freescale boards Template
+#
+# We mimic the .sdcard Freescale's image format:
+# * the SD card must have 1 kB free space at the beginning,
+# * U-Boot is dumped as is,
+# * a FAT partition at offset 8 MB is containing zImage/uImage and DTB files
+# * a single root filesystem partition is required (ext2, ext3 or ext4)
+#
+
+image boot.vfat {
+ vfat {
+ files = {
+ %FILES%
+ }
+ }
+ size = 16M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "SPL"
+ offset = 1024
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 8M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext2"
+ }
+}
new file mode 100755
@@ -0,0 +1,54 @@
+#!/usr/bin/env bash
+
+#
+# dtb_list extracts the list of DTB files from BR2_LINUX_KERNEL_INTREE_DTS_NAME
+# in ${BR_CONFIG}, then prints the corresponding list of file names for the
+# genimage configuration file
+#
+dtb_list()
+{
+ local DTB_LIST="imx6dl-pico_dwarf"
+
+ for dt in $DTB_LIST; do
+ echo -n "\"$dt.dtb\", "
+ done
+}
+
+#
+# linux_image extracts the Linux image format from BR2_LINUX_KERNEL_UIMAGE in
+# ${BR_CONFIG}, then prints the corresponding file name for the genimage
+# configuration file
+#
+linux_image()
+{
+ if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" ${BR2_CONFIG}; then
+ echo "\"uImage\""
+ else
+ echo "\"zImage\""
+ fi
+}
+
+main()
+{
+ local FILES="$(dtb_list) $(linux_image), \"u-boot.img\""
+ local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
+ local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+ sed -e "s/%FILES%/${FILES}/" \
+ board/technexion/imx6spico/genimage.cfg.template > ${GENIMAGE_CFG}
+
+ rm -rf "${GENIMAGE_TMP}"
+
+ genimage \
+ --rootpath "${TARGET_DIR}" \
+ --tmppath "${GENIMAGE_TMP}" \
+ --inputpath "${BINARIES_DIR}" \
+ --outputpath "${BINARIES_DIR}" \
+ --config "${GENIMAGE_CFG}"
+
+ rm -f ${GENIMAGE_CFG}
+
+ exit $?
+}
+
+main $@
Signed-off-by: Alexandre Gambier <agambier.dev@gmail.com> --- board/technexion/imx6spico/genimage.cfg.template | 40 ++++++++++++++++++ board/technexion/imx6spico/post-image.sh | 54 ++++++++++++++++++++++++ 2 files changed, 94 insertions(+) create mode 100644 board/technexion/imx6spico/genimage.cfg.template create mode 100755 board/technexion/imx6spico/post-image.sh