[U-Boot,v3,5/5] ls1088aqds: Enable USB command on QDS for qspi-boot

Message ID 20171011053045.33289-5-ran.wang_1@nxp.com
State Superseded
Delegated to: York Sun
Headers show
Series
  • [U-Boot,v3,1/5] arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to Kconfig
Related show

Commit Message

Ran Wang Oct. 11, 2017, 5:30 a.m.
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v3:
- none

Change in v2:
	Remove macro CONFIG_HAS_FSL_XHCI_USB and CONFIG_USB_XHCI_FSL
	and CONFIG_USB_MAX_CONTROLLER_COUNT from ls1088aqds.h since
	Kconfig option has covered.
	
Change in v1:
	Rebased to
	ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1

 configs/ls1088aqds_qspi_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Bin Meng Oct. 12, 2017, 6:01 a.m. | #1
On Wed, Oct 11, 2017 at 1:30 PM, Ran Wang <ran.wang_1@nxp.com> wrote:
> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
> Change in v3:
> - none
>
> Change in v2:
>         Remove macro CONFIG_HAS_FSL_XHCI_USB and CONFIG_USB_XHCI_FSL
>         and CONFIG_USB_MAX_CONTROLLER_COUNT from ls1088aqds.h since
>         Kconfig option has covered.
>
> Change in v1:
>         Rebased to
>         ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1
>
>  configs/ls1088aqds_qspi_defconfig | 8 ++++++++
>  1 file changed, 8 insertions(+)
>

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Patch

diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig
index 4b0d604fa0..a24a6011c9 100644
--- a/configs/ls1088aqds_qspi_defconfig
+++ b/configs/ls1088aqds_qspi_defconfig
@@ -31,3 +31,11 @@  CONFIG_FSL_DSPI=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_FSL_LS_PPA=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CMD_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y