Message ID | 1507540304-19982-10-git-send-email-calvin.johnson@nxp.com |
---|---|
State | Superseded |
Delegated to: | Joe Hershberger |
Headers | show |
Series | LS1012A PFE driver patch series | expand |
> -----Original Message----- > From: Calvin Johnson [mailto:calvin.johnson@nxp.com] > Sent: Monday, October 09, 2017 2:42 PM > To: u-boot@lists.denx.de > Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>; York Sun > <york.sun@nxp.com>; joe.hershberger@ni.com; Calvin Johnson > <calvin.johnson@nxp.com>; Anji Jagarlmudi <anji.jagarlmudi@nxp.com> > Subject: [PATCH 9/9] configs: ls1012a: add pfe configuration for LS1012A > > Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> > Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> > --- > configs/ls1012afrdm_qspi_defconfig | 1 + > configs/ls1012aqds_qspi_defconfig | 1 + > configs/ls1012ardb_qspi_defconfig | 1 + > drivers/net/Kconfig | 1 + > drivers/net/Makefile | 1 + > drivers/net/pfe_eth/Kconfig | 23 ++++++++++++++++++++++- > include/configs/ls1012a_common.h | 6 +++--- > include/configs/ls1012afrdm.h | 7 +++++++ > include/configs/ls1012aqds.h | 14 ++++++++++++++ > include/configs/ls1012ardb.h | 8 ++++++++ > 10 files changed, 59 insertions(+), 4 deletions(-) > > diff --git a/configs/ls1012afrdm_qspi_defconfig > b/configs/ls1012afrdm_qspi_defconfig > index 84b5577..7db7a18 100644 > --- a/configs/ls1012afrdm_qspi_defconfig > +++ b/configs/ls1012afrdm_qspi_defconfig > @@ -32,6 +32,7 @@ CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/configs/ls1012aqds_qspi_defconfig > b/configs/ls1012aqds_qspi_defconfig > index 2124273..4b9fdf5 100644 > --- a/configs/ls1012aqds_qspi_defconfig > +++ b/configs/ls1012aqds_qspi_defconfig > @@ -37,6 +37,7 @@ CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/configs/ls1012ardb_qspi_defconfig > b/configs/ls1012ardb_qspi_defconfig > index 40349ce..d63e736 100644 > --- a/configs/ls1012ardb_qspi_defconfig > +++ b/configs/ls1012ardb_qspi_defconfig > @@ -35,6 +35,7 @@ CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 736aab2..c82c63b 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -304,4 +304,5 @@ config FEC2_PHY_NORXERR > The PHY does not have a RXERR line (RMII only). > (so program the FEC to ignore it). > > +source "drivers/net/pfe_eth/Kconfig" > endif # NETDEVICES > diff --git a/drivers/net/Makefile b/drivers/net/Makefile > index 94a4fd8..0572cde 100644 > --- a/drivers/net/Makefile > +++ b/drivers/net/Makefile > @@ -75,3 +75,4 @@ obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o > obj-$(CONFIG_VSC9953) += vsc9953.o > obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o > obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o > +obj-$(CONFIG_FSL_PFE) += pfe_eth/ > diff --git a/drivers/net/pfe_eth/Kconfig b/drivers/net/pfe_eth/Kconfig > index b9996df..c05aeda 100644 > --- a/drivers/net/pfe_eth/Kconfig > +++ b/drivers/net/pfe_eth/Kconfig > @@ -1,8 +1,29 @@ > +menuconfig FSL_PFE > + bool "Freescale PFE driver" > + help > + This driver provides support for Freescale PFE. > + > +if FSL_PFE > + > config UTIL_PE_DISABLED > bool > help > Disable UTIL processor engine of PFE > > -config SYS_FSL_PPFE_ADDR > +config SYS_FSL_PFE_ADDR > hex "PFE base address" > default 0x04000000 > + > +config SYS_LS_PFE_FW_ADDR > + hex "Flash address of PFE firmware" > + default 0x40a00000 > + Why this parameter in Kconfig. This address is hard-coded per platform as defined in standard LSDK flash layout. --pk
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index 84b5577..7db7a18 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -32,6 +32,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_FSL_PFE=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index 2124273..4b9fdf5 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -37,6 +37,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_FSL_PFE=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig index 40349ce..d63e736 100644 --- a/configs/ls1012ardb_qspi_defconfig +++ b/configs/ls1012ardb_qspi_defconfig @@ -35,6 +35,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_FSL_PFE=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 736aab2..c82c63b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -304,4 +304,5 @@ config FEC2_PHY_NORXERR The PHY does not have a RXERR line (RMII only). (so program the FEC to ignore it). +source "drivers/net/pfe_eth/Kconfig" endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 94a4fd8..0572cde 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -75,3 +75,4 @@ obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o obj-$(CONFIG_VSC9953) += vsc9953.o obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o +obj-$(CONFIG_FSL_PFE) += pfe_eth/ diff --git a/drivers/net/pfe_eth/Kconfig b/drivers/net/pfe_eth/Kconfig index b9996df..c05aeda 100644 --- a/drivers/net/pfe_eth/Kconfig +++ b/drivers/net/pfe_eth/Kconfig @@ -1,8 +1,29 @@ +menuconfig FSL_PFE + bool "Freescale PFE driver" + help + This driver provides support for Freescale PFE. + +if FSL_PFE + config UTIL_PE_DISABLED bool help Disable UTIL processor engine of PFE -config SYS_FSL_PPFE_ADDR +config SYS_FSL_PFE_ADDR hex "PFE base address" default 0x04000000 + +config SYS_LS_PFE_FW_ADDR + hex "Flash address of PFE firmware" + default 0x40a00000 + +config DDR_PFE_PHYS_BASEADDR + hex "PFE DDR physical base address" + default 0x03800000 + +config DDR_PFE_BASEADDR + hex "PFE DDR base address" + default 0x83800000 + +endif diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 52c2c3a..3df5586 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -113,9 +113,9 @@ #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" #undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ - "$kernel_start $kernel_size && "\ - "bootm $kernel_load" +#define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\ + "$kernel_start $kernel_size && "\ + "bootm $kernel_load" /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 544dea0..a3f8824 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -9,6 +9,13 @@ #include "ls1012a_common.h" +#ifdef CONFIG_FSL_PFE +#define EMAC1_PHY_ADDR 0x2 +#define EMAC2_PHY_ADDR 0x1 +#define CONFIG_PHYLIB +#define CONFIG_PHY_REALTEK +#endif + /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 16714bb..9873339 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -9,6 +9,20 @@ #include "ls1012a_common.h" +/* PFE Ethernet */ +#ifdef CONFIG_FSL_PFE +#define EMAC1_PHY_ADDR 0x1e +#define EMAC2_PHY_ADDR 0x1 +#define SGMII_2500_PHY1_ADDR 0x1 +#define SGMII_2500_PHY2_ADDR 0x2 +#define CONFIG_PHYLIB +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#define CONFIG_PHY_AQUANTIA +#define CONFIG_PHYLIB_10G +#define RGMII_RESET_WA +#endif + /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index e47bb7c..e8f42e4 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -9,6 +9,14 @@ #include "ls1012a_common.h" +/* PFE Ethernet */ +#ifdef CONFIG_FSL_PFE +#define EMAC1_PHY_ADDR 0x2 +#define EMAC2_PHY_ADDR 0x1 +#define CONFIG_PHYLIB +#define CONFIG_PHY_REALTEK +#endif + /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1