| Message ID | 1507208851-32672-9-git-send-email-chin.liang.see@intel.com |
|---|---|
| State | Deferred |
| Delegated to: | Tom Rini |
| Headers | show |
| Series | Enable Stratix10 SoC support | expand |
On Thu, Oct 5, 2017 at 8:07 AM, <chin.liang.see@intel.com> wrote: > From: Chin Liang See <chin.liang.see@intel.com> > > Device tree for Stratix10 SoC > > Signed-off-by: Chin Liang See <chin.liang.see@intel.com> > --- > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/socfpga_stratix10_socdk.dts | 180 +++++++++++++++++++++++++++++++ > 2 files changed, 182 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/socfpga_stratix10_socdk.dts Shouldn't you have a dtsi base file for the SOC, and then subsequent boards would be the dts? > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 7c062f0..f66b9c9 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -171,7 +171,8 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ > socfpga_cyclone5_sockit.dtb \ > socfpga_cyclone5_socrates.dtb \ > socfpga_cyclone5_sr1500.dtb \ > - socfpga_cyclone5_vining_fpga.dtb > + socfpga_cyclone5_vining_fpga.dtb \ > + socfpga_stratix10_socdk.dtb > > dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \ > dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb > diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts > new file mode 100644 > index 0000000..26b407f > --- /dev/null > +++ b/arch/arm/dts/socfpga_stratix10_socdk.dts > @@ -0,0 +1,180 @@ > +/* > + * Copyright (C) 2016-2017 Intel Corporation <www.intel.com> > + * > + * SPDX-License-Identifier: GPL-2.0 > + */ > + > +/dts-v1/; > +#include "skeleton.dtsi" > +#include <dt-bindings/reset/altr,rst-mgr-s10.h> > + > +/ { > + model = "Intel SOCFPGA Stratix 10 SoC Development Kit"; > + compatible = "altr,socfpga-stratix10", "altr,socfpga"; > + > + #address-cells = <1>; > + #size-cells = <1>; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + }; > + > + aliases { > + ethernet0 = &gmac0; > + spi0 = &qspi; > + }; > + > + memory { > + name = "memory"; > + device_type = "memory"; > + reg = <0x0 0x80000000>; /* 2GB */ > + }; > + > + regulator_3_3v: 3-3-v-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + compatible = "arm,cortex-a53", "arm,armv8"; > + device_type = "cpu"; > + enable-method = "psci"; > + reg = <0x0>; > + }; > + > + cpu@1 { > + compatible = "arm,cortex-a53", "arm,armv8"; > + device_type = "cpu"; > + enable-method = "psci"; > + reg = <0x1>; > + }; > + > + cpu@2 { > + compatible = "arm,cortex-a53", "arm,armv8"; > + device_type = "cpu"; > + enable-method = "psci"; > + reg = <0x2>; > + }; > + > + cpu@3 { > + compatible = "arm,cortex-a53", "arm,armv8"; > + device_type = "cpu"; > + enable-method = "psci"; > + reg = <0x3>; > + }; > + }; > + > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + device_type = "soc"; > + ranges; > + u-boot,dm-pre-reloc; > + > + rst: rstmgr@ffd11000 { > + #reset-cells = <1>; > + compatible = "altr,rst-mgr"; > + reg = <0xffd11000 0x100>; > + altr,modrst-offset = <0x20>; > + }; > + > + mdio { > + phy0: ethernet-phy@0 { > + txd0-skew-ps = <0>; /* -420ps */ > + txd1-skew-ps = <0>; /* -420ps */ > + txd2-skew-ps = <0>; /* -420ps */ > + txd3-skew-ps = <0>; /* -420ps */ > + rxd0-skew-ps = <420>; /* 0ps */ > + rxd1-skew-ps = <420>; /* 0ps */ > + rxd2-skew-ps = <420>; /* 0ps */ > + rxd3-skew-ps = <420>; /* 0ps */ > + txen-skew-ps = <0>; /* -420ps */ > + txc-skew-ps = <1860>; /* 960ps */ > + rxdv-skew-ps = <420>; /* 0ps */ > + rxc-skew-ps = <1680>; /* 780ps */ > + }; > + }; > + > + gmac0: ethernet@ff800000 { > + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; > + reg = <0xff800000 0x2000>; > + interrupts = <0 90 4>; > + interrupt-names = "macirq"; > + mac-address = [00 00 00 00 00 00]; > + resets = <&rst EMAC0_RESET>; > + reset-names = "stmmaceth"; > + phy-mode = "rgmii"; > + phy-addr = <0xffffffff>; /* probe for phy addr */ I don't a usage for 'phy-addr' in the code anymore. Dinh
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7c062f0..f66b9c9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -171,7 +171,8 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ socfpga_cyclone5_sr1500.dtb \ - socfpga_cyclone5_vining_fpga.dtb + socfpga_cyclone5_vining_fpga.dtb \ + socfpga_stratix10_socdk.dtb dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \ dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts new file mode 100644 index 0000000..26b407f --- /dev/null +++ b/arch/arm/dts/socfpga_stratix10_socdk.dts @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2016-2017 Intel Corporation <www.intel.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +/dts-v1/; +#include "skeleton.dtsi" +#include <dt-bindings/reset/altr,rst-mgr-s10.h> + +/ { + model = "Intel SOCFPGA Stratix 10 SoC Development Kit"; + compatible = "altr,socfpga-stratix10", "altr,socfpga"; + + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + aliases { + ethernet0 = &gmac0; + spi0 = &qspi; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x80000000>; /* 2GB */ + }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x0>; + }; + + cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x1>; + }; + + cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x2>; + }; + + cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x3>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + ranges; + u-boot,dm-pre-reloc; + + rst: rstmgr@ffd11000 { + #reset-cells = <1>; + compatible = "altr,rst-mgr"; + reg = <0xffd11000 0x100>; + altr,modrst-offset = <0x20>; + }; + + mdio { + phy0: ethernet-phy@0 { + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; + + gmac0: ethernet@ff800000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff800000 0x2000>; + interrupts = <0 90 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC0_RESET>; + reset-names = "stmmaceth"; + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; /* probe for phy addr */ + phy = <&phy0>; + max-speed = <1000>; + status = "okay"; + }; + + mmc0: dwmmc0@0xff808000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-dw-mshc"; + reg = <0xff808000 0x1000>; + interrupts = <0 96 4>; + num-slots = <1>; + broken-cd; + bus-width = <4>; + fifo-depth = <0x400>; + cap-mmc-highspeed; + cap-sd-highspeed; + drvsel = <3>; + smplsel = <0>; + status = "okay"; + u-boot,dm-pre-reloc; + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; + }; + + uart0: serial0@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x1000>; + interrupts = <0 108 4>; + reg-shift = <2>; + reg-io-width = <4>; + status = "okay"; + }; + + qspi: spi@ff8d2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cadence,qspi"; + reg = <0xff8d2000 0x100>, + <0xff900000 0x100000>; + interrupts = <0 98 4>; + sram-size = <1024>; + bus-num = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + status = "okay"; + u-boot,dm-pre-reloc; + + flash0: n25q1024a@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "stmicro,n25q1024a"; + reg = <0>; /* chip select */ + spi-max-frequency = <50000000>; + page-size = <256>; + block-size = <16>; /* 2^16, 64KB */ + tshsl-ns = <50>; + tsd2d-ns = <50>; + tchsh-ns = <4>; + tslch-ns = <4>; + }; + }; + }; +};