diff mbox series

pinctrl: sh-pfc: r8a7795: add I2C pin support

Message ID 20171004155252.21080-1-wsa@the-dreams.de
State New
Headers show
Series pinctrl: sh-pfc: r8a7795: add I2C pin support | expand

Commit Message

Wolfram Sang Oct. 4, 2017, 3:52 p.m. UTC 
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Since pinmuxing for I2C is equal on H3 ES1.0 and later versions, copy
the I2C settings from ES1.0. Fixes this error in upstream for
Salvator-XS:

sh-pfc e6060000.pin-controller: function 'i2c2' not supported
sh-pfc e6060000.pin-controller: invalid function i2c2 in map table
i2c-rcar: probe of e6510000.i2c failed with error -22

Now, the bus works the same as with other Salvator boards.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

This patch is based on top of Geert's sh-pfc branch. I'd think it is a bugfix
for the above reasons and it would be really great to have it in v4.14. But you
guys will have the final word, of course.

This patch took a day longer because I first wanted to incorporate the BSP patch
2caf6c5f77edc5 ("pinctrl: sh-pfc: r8a7795: Add I2C{0,3,5} pins, groups and functions")
into it, but finally considered this is a seperate issue. It needs fixing for ES1.0
as well.

I tested it with the on-board I2C2 bus. As far as I read the specs, I can't
test I2C6 (because the pull-ups are missing) and I2C1 (0 Ohm resistors not
stuffed, so not available on EXIO connector A). I checked the datasheets to ensure
the PFC settings are really equal to the best of my knowledge.

Please apply and/or comment. Thanks! :)


 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 77 ++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

Comments

Geert Uytterhoeven Oct. 4, 2017, 4:10 p.m. UTC | #1 
Hi Wolfram,

On Wed, Oct 4, 2017 at 5:52 PM, Wolfram Sang <wsa@the-dreams.de> wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
>
> Since pinmuxing for I2C is equal on H3 ES1.0 and later versions, copy
> the I2C settings from ES1.0. Fixes this error in upstream for
> Salvator-XS:
>
> sh-pfc e6060000.pin-controller: function 'i2c2' not supported
> sh-pfc e6060000.pin-controller: invalid function i2c2 in map table
> i2c-rcar: probe of e6510000.i2c failed with error -22
>
> Now, the bus works the same as with other Salvator boards.

Thanks for your patch!

> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in sh-pfc-for-v4.15.

> This patch is based on top of Geert's sh-pfc branch. I'd think it is a bugfix
> for the above reasons and it would be really great to have it in v4.14. But you
> guys will have the final word, of course.

I tend to disagree: this is just part of the normal process of adding hardware
support incrementally.

While in this particular case hardware got (partially) enabled early due to
.dtsi sharing, the same could have happened without sharing, as DT and PFC
patches go in through different channels, and could arrive upstream in
different released versions.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 351855b36f69e9..fe32aaccb56460 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -1955,6 +1955,57 @@  static const unsigned int du_disp_mux[] = {
 	DU_DISP_MARK,
 };
 
+/* - I2C -------------------------------------------------------------------- */
+static const unsigned int i2c1_a_pins[] = {
+	/* SDA, SCL */
+	RCAR_GP_PIN(5, 11), RCAR_GP_PIN(5, 10),
+};
+static const unsigned int i2c1_a_mux[] = {
+	SDA1_A_MARK, SCL1_A_MARK,
+};
+static const unsigned int i2c1_b_pins[] = {
+	/* SDA, SCL */
+	RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 23),
+};
+static const unsigned int i2c1_b_mux[] = {
+	SDA1_B_MARK, SCL1_B_MARK,
+};
+static const unsigned int i2c2_a_pins[] = {
+	/* SDA, SCL */
+	RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 4),
+};
+static const unsigned int i2c2_a_mux[] = {
+	SDA2_A_MARK, SCL2_A_MARK,
+};
+static const unsigned int i2c2_b_pins[] = {
+	/* SDA, SCL */
+	RCAR_GP_PIN(3, 13), RCAR_GP_PIN(3, 12),
+};
+static const unsigned int i2c2_b_mux[] = {
+	SDA2_B_MARK, SCL2_B_MARK,
+};
+static const unsigned int i2c6_a_pins[] = {
+	/* SDA, SCL */
+	RCAR_GP_PIN(1, 8), RCAR_GP_PIN(1, 11),
+};
+static const unsigned int i2c6_a_mux[] = {
+	SDA6_A_MARK, SCL6_A_MARK,
+};
+static const unsigned int i2c6_b_pins[] = {
+	/* SDA, SCL */
+	RCAR_GP_PIN(1, 26), RCAR_GP_PIN(1, 25),
+};
+static const unsigned int i2c6_b_mux[] = {
+	SDA6_B_MARK, SCL6_B_MARK,
+};
+static const unsigned int i2c6_c_pins[] = {
+	/* SDA, SCL */
+	RCAR_GP_PIN(0, 15), RCAR_GP_PIN(0, 14),
+};
+static const unsigned int i2c6_c_mux[] = {
+	SDA6_C_MARK, SCL6_C_MARK,
+};
+
 /* - MSIOF0 ----------------------------------------------------------------- */
 static const unsigned int msiof0_clk_pins[] = {
 	/* SCK */
@@ -3263,6 +3314,13 @@  static const struct sh_pfc_pin_group pinmux_groups[] = {
 	SH_PFC_PIN_GROUP(du_oddf),
 	SH_PFC_PIN_GROUP(du_cde),
 	SH_PFC_PIN_GROUP(du_disp),
+	SH_PFC_PIN_GROUP(i2c1_a),
+	SH_PFC_PIN_GROUP(i2c1_b),
+	SH_PFC_PIN_GROUP(i2c2_a),
+	SH_PFC_PIN_GROUP(i2c2_b),
+	SH_PFC_PIN_GROUP(i2c6_a),
+	SH_PFC_PIN_GROUP(i2c6_b),
+	SH_PFC_PIN_GROUP(i2c6_c),
 	SH_PFC_PIN_GROUP(msiof0_clk),
 	SH_PFC_PIN_GROUP(msiof0_sync),
 	SH_PFC_PIN_GROUP(msiof0_ss1),
@@ -3503,6 +3561,22 @@  static const char * const du_groups[] = {
 	"du_disp",
 };
 
+static const char * const i2c1_groups[] = {
+	"i2c1_a",
+	"i2c1_b",
+};
+
+static const char * const i2c2_groups[] = {
+	"i2c2_a",
+	"i2c2_b",
+};
+
+static const char * const i2c6_groups[] = {
+	"i2c6_a",
+	"i2c6_b",
+	"i2c6_c",
+};
+
 static const char * const msiof0_groups[] = {
 	"msiof0_clk",
 	"msiof0_sync",
@@ -3763,6 +3837,9 @@  static const struct sh_pfc_function pinmux_functions[] = {
 	SH_PFC_FUNCTION(drif2),
 	SH_PFC_FUNCTION(drif3),
 	SH_PFC_FUNCTION(du),
+	SH_PFC_FUNCTION(i2c1),
+	SH_PFC_FUNCTION(i2c2),
+	SH_PFC_FUNCTION(i2c6),
 	SH_PFC_FUNCTION(msiof0),
 	SH_PFC_FUNCTION(msiof1),
 	SH_PFC_FUNCTION(msiof2),