@@ -613,6 +613,12 @@ i40e_status i40e_init_adminq(struct i40e_hw *hw)
hw->flags |= I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE;
}
+ /* The ability to RX (not drop) 802.1ad frames was added in API 1.7 */
+ if (hw->aq.api_maj_ver > 1 ||
+ (hw->aq.api_maj_ver == 1 &&
+ hw->aq.api_min_ver >= 7))
+ hw->flags |= I40E_HW_FLAG_802_1AD_CAPABLE;
+
if (hw->aq.api_maj_ver > I40E_FW_API_VERSION_MAJOR) {
ret_code = I40E_ERR_FIRMWARE_API_VERSION;
goto init_adminq_free_arq;
@@ -775,7 +775,22 @@ struct i40e_aqc_set_switch_config {
#define I40E_AQ_SET_SWITCH_CFG_PROMISC 0x0001
#define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002
__le16 valid_flags;
- u8 reserved[12];
+ /* The ethertype in switch_tag is dropped on ingress and used
+ * internally by the switch. Set this to zero for the default
+ * of 0x88a8 (802.1ad). Should be zero for firmware API
+ * versions lower than 1.7.
+ */
+ __le16 switch_tag;
+ /* The ethertypes in first_tag and second_tag are used to
+ * match the outer and inner VLAN tags (respectively) when HW
+ * double VLAN tagging is enabled via the set port parameters
+ * AQ command. Otherwise these are both ignored. Set them to
+ * zero for their defaults of 0x8100 (802.1Q). Should be zero
+ * for firmware API versions lower than 1.7.
+ */
+ __le16 first_tag;
+ __le16 second_tag;
+ u8 reserved[6];
};
I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
@@ -2402,7 +2402,11 @@ enum i40e_status_code i40e_aq_set_switch_config(struct i40e_hw *hw,
i40e_aqc_opc_set_switch_config);
scfg->flags = cpu_to_le16(flags);
scfg->valid_flags = cpu_to_le16(valid_flags);
-
+ if (hw->flags & I40E_HW_FLAG_802_1AD_CAPABLE) {
+ scfg->switch_tag = cpu_to_le16(hw->switch_tag);
+ scfg->first_tag = cpu_to_le16(hw->first_tag);
+ scfg->second_tag = cpu_to_le16(hw->second_tag);
+ }
status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
return status;
@@ -11361,6 +11361,13 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw->bus.bus_id = pdev->bus->number;
pf->instance = pfs_found;
+ /* Select something other than the 802.1ad ethertype for the
+ * switch to use internally and drop on ingress.
+ */
+ hw->switch_tag = 0xffff;
+ hw->first_tag = ETH_P_8021AD;
+ hw->second_tag = ETH_P_8021Q;
+
INIT_LIST_HEAD(&pf->l3_flex_pit_list);
INIT_LIST_HEAD(&pf->l4_flex_pit_list);
@@ -610,9 +610,15 @@ struct i40e_hw {
struct i40e_dcbx_config desired_dcbx_config; /* CEE Desired Cfg */
#define I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE BIT_ULL(0)
+#define I40E_HW_FLAG_802_1AD_CAPABLE BIT_ULL(1)
#define I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE BIT_ULL(2)
u64 flags;
+ /* Used in set switch config AQ command */
+ u16 switch_tag;
+ u16 first_tag;
+ u16 second_tag;
+
/* debug mask */
u32 debug_mask;
char err_str[16];
@@ -771,7 +771,22 @@ struct i40e_aqc_set_switch_config {
#define I40E_AQ_SET_SWITCH_CFG_PROMISC 0x0001
#define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002
__le16 valid_flags;
- u8 reserved[12];
+ /* The ethertype in switch_tag is dropped on ingress and used
+ * internally by the switch. Set this to zero for the default
+ * of 0x88a8 (802.1ad). Should be zero for firmware API
+ * versions lower than 1.7.
+ */
+ __le16 switch_tag;
+ /* The ethertypes in first_tag and second_tag are used to
+ * match the outer and inner VLAN tags (respectively) when HW
+ * double VLAN tagging is enabled via the set port parameters
+ * AQ command. Otherwise these are both ignored. Set them to
+ * zero for their defaults of 0x8100 (802.1Q). Should be zero
+ * for firmware API versions lower than 1.7.
+ */
+ __le16 first_tag;
+ __le16 second_tag;
+ u8 reserved[6];
};
I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
@@ -568,6 +568,7 @@ struct i40e_hw {
/* LLDP/DCBX Status */
u16 dcbx_status;
+#define I40E_HW_FLAG_802_1AD_CAPABLE BIT_ULL(1)
#define I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE BIT_ULL(2)
/* DCBX info */
@@ -575,6 +576,11 @@ struct i40e_hw {
struct i40e_dcbx_config remote_dcbx_config; /* Peer Cfg */
struct i40e_dcbx_config desired_dcbx_config; /* CEE Desired Cfg */
+ /* Used in set switch config AQ command */
+ u16 switch_tag;
+ u16 first_tag;
+ u16 second_tag;
+
/* debug mask */
u32 debug_mask;
char err_str[16];