diff mbox series

[U-Boot,v2,18/19] arm: socfpga: Adding SoCFPGA info for both SPL and U-boot

Message ID 1506328815-23733-19-git-send-email-tien.fong.chee@intel.com
State Changes Requested
Delegated to: Marek Vasut
Headers show
Series Add FPGA, SDRAM, SPL loads U-boot & booting to console | expand

Commit Message

Chee, Tien Fong Sept. 25, 2017, 8:40 a.m. UTC 
From: Tien Fong Chee <tien.fong.chee@intel.com>

SoC FPGA info is required in both SPL and U-boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
---
 arch/arm/mach-socfpga/board.c        | 3 +++
 arch/arm/mach-socfpga/misc_arria10.c | 5 -----
 arch/arm/mach-socfpga/spl.c          | 6 ++++++
 3 files changed, 9 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c
index a00f63b..0fbad67 100644
--- a/arch/arm/mach-socfpga/board.c
+++ b/arch/arm/mach-socfpga/board.c
@@ -32,6 +32,9 @@  int board_init(void)
 	/* configuring the clock based on handoff */
 	cm_basic_init(gd->fdt_blob);
 
+	/* Add device descriptor to FPGA device table */
+	socfpga_fpga_add();
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c
index 9d751f6..8760ac9 100644
--- a/arch/arm/mach-socfpga/misc_arria10.c
+++ b/arch/arm/mach-socfpga/misc_arria10.c
@@ -94,11 +94,6 @@  int arch_early_init_r(void)
 	/* assert reset to all except L4WD0 and L4TIMER0 */
 	socfpga_per_reset_all();
 
-	/* configuring the clock based on handoff */
-	/* TODO: Add call to cm_basic_init() */
-
-	/* Add device descriptor to FPGA device table */
-	socfpga_fpga_add();
 	return 0;
 }
 #else
diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
index 71bae82..aba116d 100644
--- a/arch/arm/mach-socfpga/spl.c
+++ b/arch/arm/mach-socfpga/spl.c
@@ -15,6 +15,7 @@ 
 #include <asm/arch/system_manager.h>
 #include <asm/arch/freeze_controller.h>
 #include <asm/arch/clock_manager.h>
+#include <asm/arch/misc.h>
 #include <asm/arch/scan_manager.h>
 #include <asm/arch/sdram.h>
 #include <asm/arch/scu.h>
@@ -208,6 +209,11 @@  void spl_board_init(void)
 
 	/* enable console uart printing */
 	preloader_console_init();
+
+	WATCHDOG_RESET();
+
+	/* Add device descriptor to FPGA device table */
+	socfpga_fpga_add();
 }
 
 void board_init_f(ulong dummy)