Message ID | 20170924163301.10853-1-yann.morin.1998@free.fr |
---|---|
State | Accepted |
Headers | show |
Series | package/asterisk: fix host build | expand |
On 24-09-17 18:33, Yann E. MORIN wrote: > The host menuselect tool is linked to our host libxml2 library, but it > is missing an RPATH to the host directory. > > This is because menuselect does not use automake, so does not inherit > the LDFLAGS from the configure run. > > We fix that by simply passing $(HOST_CONFIGURE_OPTS) in the make > environment. > > At the same time, we also install the tool in the host directory, even > if not used from there, so that the sanity checks we run are properly > passed. > > Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> > Cc: Arnout Vandecappelle <arnout@mind.be> > --- > package/asterisk/asterisk.mk | 21 ++++++++++++++++----- > 1 file changed, 16 insertions(+), 5 deletions(-) > > diff --git a/package/asterisk/asterisk.mk b/package/asterisk/asterisk.mk > index a6801a006d..50512c0b3a 100644 > --- a/package/asterisk/asterisk.mk > +++ b/package/asterisk/asterisk.mk > @@ -294,12 +294,23 @@ HOST_ASTERISK_CONF_OPTS = \ > --without-curses \ > --with-ncurses=$(HOST_DIR)/usr > > -# Even though menuselect is an autotools package, it is *not* installed, > -# as asterisk does expect it to be in a sub-directory of its source tree, > -# which do by copying the full menuselect build tree as a pre-configure > -# hook in the target variant. > +# Not an automake package, so does not inherit LDFLAGS et al. from > +# the configure run. > +HOST_ASTERISK_MAKE_ENV = $(HOST_CONFIGURE_OPTS) > + > +# Even though menuselect is an autotools package, it is not an automake > +# package and does not have an 'install' rule, as asterisk does expect > +# it to be in a sub-directory of its source tree. We do so by copying > +# the full menuselect build tree as a pre-configure hook in the target > +# variant. > +# However, the sanity checks on host packages are not run on menuselect. > +# But we still want to catch that menuselect has the proper rpath set, > +# for example, as it uses host libraries that we do build, like > +# host-libxml2. > +# So we do manually install the menuselect tool. > define HOST_ASTERISK_INSTALL_CMDS > - @: > + $(INSTALL) -D -m 0755 $(@D)/menuselect/menuselect \ > + $(HOST_DIR)/bin/asterisk-menuselect So then could you symlink to this instead of copying the entire tree? Regards, Arnout > endef > > $(eval $(host-autotools-package)) >
On 2017-09-24 18:51 +0200, Arnout Vandecappelle spake thusly: > > > On 24-09-17 18:33, Yann E. MORIN wrote: > > The host menuselect tool is linked to our host libxml2 library, but it > > is missing an RPATH to the host directory. > > > > This is because menuselect does not use automake, so does not inherit > > the LDFLAGS from the configure run. > > > > We fix that by simply passing $(HOST_CONFIGURE_OPTS) in the make > > environment. > > > > At the same time, we also install the tool in the host directory, even > > if not used from there, so that the sanity checks we run are properly > > passed. > > > > Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> > > Cc: Arnout Vandecappelle <arnout@mind.be> > > --- > > package/asterisk/asterisk.mk | 21 ++++++++++++++++----- > > 1 file changed, 16 insertions(+), 5 deletions(-) > > > > diff --git a/package/asterisk/asterisk.mk b/package/asterisk/asterisk.mk > > index a6801a006d..50512c0b3a 100644 > > --- a/package/asterisk/asterisk.mk > > +++ b/package/asterisk/asterisk.mk > > @@ -294,12 +294,23 @@ HOST_ASTERISK_CONF_OPTS = \ > > --without-curses \ > > --with-ncurses=$(HOST_DIR)/usr > > > > -# Even though menuselect is an autotools package, it is *not* installed, > > -# as asterisk does expect it to be in a sub-directory of its source tree, > > -# which do by copying the full menuselect build tree as a pre-configure > > -# hook in the target variant. > > +# Not an automake package, so does not inherit LDFLAGS et al. from > > +# the configure run. > > +HOST_ASTERISK_MAKE_ENV = $(HOST_CONFIGURE_OPTS) > > + > > +# Even though menuselect is an autotools package, it is not an automake > > +# package and does not have an 'install' rule, as asterisk does expect > > +# it to be in a sub-directory of its source tree. We do so by copying > > +# the full menuselect build tree as a pre-configure hook in the target > > +# variant. > > +# However, the sanity checks on host packages are not run on menuselect. > > +# But we still want to catch that menuselect has the proper rpath set, > > +# for example, as it uses host libraries that we do build, like > > +# host-libxml2. > > +# So we do manually install the menuselect tool. > > define HOST_ASTERISK_INSTALL_CMDS > > - @: > > + $(INSTALL) -D -m 0755 $(@D)/menuselect/menuselect \ > > + $(HOST_DIR)/bin/asterisk-menuselect > > So then could you symlink to this instead of copying the entire tree? Nope, because all the intermediate object files would missing, so the Makefile would try to build them, and would then rebuild menuseclect as well, and all those efforts would have been in vain... And anyway, this would have been a topic different from this patch. Regards, Yann E. MORIN.
Arnout, All, On 2017-09-24 19:04 +0200, Yann E. MORIN spake thusly: > On 2017-09-24 18:51 +0200, Arnout Vandecappelle spake thusly: > > On 24-09-17 18:33, Yann E. MORIN wrote: [--SNIP--] > > > +# Even though menuselect is an autotools package, it is not an automake > > > +# package and does not have an 'install' rule, as asterisk does expect > > > +# it to be in a sub-directory of its source tree. We do so by copying > > > +# the full menuselect build tree as a pre-configure hook in the target > > > +# variant. > > > +# However, the sanity checks on host packages are not run on menuselect. > > > +# But we still want to catch that menuselect has the proper rpath set, > > > +# for example, as it uses host libraries that we do build, like > > > +# host-libxml2. > > > +# So we do manually install the menuselect tool. > > > define HOST_ASTERISK_INSTALL_CMDS > > > - @: > > > + $(INSTALL) -D -m 0755 $(@D)/menuselect/menuselect \ > > > + $(HOST_DIR)/bin/asterisk-menuselect > > > > So then could you symlink to this instead of copying the entire tree? > > Nope, because all the intermediate object files would missing, so the > Makefile would try to build them, and would then rebuild menuseclect as > well, and all those efforts would have been in vain... Oh, and I forgot: it needs a file, makeopts, generated by configure, but running menuselect's configure in the target variant is the things we want to avoid in the first place. And to be sure, I tried what you suggest, and it does not work (build failure). Regards, Yann E. MORIN.
On 24-09-17 18:33, Yann E. MORIN wrote: > The host menuselect tool is linked to our host libxml2 library, but it > is missing an RPATH to the host directory. > > This is because menuselect does not use automake, so does not inherit > the LDFLAGS from the configure run. > > We fix that by simply passing $(HOST_CONFIGURE_OPTS) in the make > environment. > > At the same time, we also install the tool in the host directory, even > if not used from there, so that the sanity checks we run are properly > passed. I think this is a bit over the top, but oh well. > > Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> > Cc: Arnout Vandecappelle <arnout@mind.be> Applied to master, thanks. Regards, Arnout
diff --git a/package/asterisk/asterisk.mk b/package/asterisk/asterisk.mk index a6801a006d..50512c0b3a 100644 --- a/package/asterisk/asterisk.mk +++ b/package/asterisk/asterisk.mk @@ -294,12 +294,23 @@ HOST_ASTERISK_CONF_OPTS = \ --without-curses \ --with-ncurses=$(HOST_DIR)/usr -# Even though menuselect is an autotools package, it is *not* installed, -# as asterisk does expect it to be in a sub-directory of its source tree, -# which do by copying the full menuselect build tree as a pre-configure -# hook in the target variant. +# Not an automake package, so does not inherit LDFLAGS et al. from +# the configure run. +HOST_ASTERISK_MAKE_ENV = $(HOST_CONFIGURE_OPTS) + +# Even though menuselect is an autotools package, it is not an automake +# package and does not have an 'install' rule, as asterisk does expect +# it to be in a sub-directory of its source tree. We do so by copying +# the full menuselect build tree as a pre-configure hook in the target +# variant. +# However, the sanity checks on host packages are not run on menuselect. +# But we still want to catch that menuselect has the proper rpath set, +# for example, as it uses host libraries that we do build, like +# host-libxml2. +# So we do manually install the menuselect tool. define HOST_ASTERISK_INSTALL_CMDS - @: + $(INSTALL) -D -m 0755 $(@D)/menuselect/menuselect \ + $(HOST_DIR)/bin/asterisk-menuselect endef $(eval $(host-autotools-package))
The host menuselect tool is linked to our host libxml2 library, but it is missing an RPATH to the host directory. This is because menuselect does not use automake, so does not inherit the LDFLAGS from the configure run. We fix that by simply passing $(HOST_CONFIGURE_OPTS) in the make environment. At the same time, we also install the tool in the host directory, even if not used from there, so that the sanity checks we run are properly passed. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Arnout Vandecappelle <arnout@mind.be> --- package/asterisk/asterisk.mk | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)