Message ID | 20170924145622.4031-2-linus.walleij@linaro.org |
---|---|
State | Rejected, archived |
Headers | show |
Series | [1/8] extcon: gpio: Add DT bindings | expand |
On Sun, Sep 24, 2017 at 9:56 AM, Linus Walleij <linus.walleij@linaro.org> wrote: > Add some reasonable device tree bindings and also add the cable defines > to the extcon include in <dt-bindings/extcon/connectors.h> since > the GPIO extcon definately need to specify which cable/connector it is > detecting. > > Adding the include file makes the (as it happens) Linux numbers into an > ABI, but I do not see any better method. It is possible to define strings > for all cable types but it seems like overkill, just reusing Linux' > enumerators seems like a good idea. > > The binding supports any number of GPIOs and connectors, but the driver > currently only supports one connector on one GPIO line. My view of extcon binding is it is fundamentally broken. I've expressed this multiple times before. TL;DR: Anything extending the existing extcon binding will be NAKed. > > Cc: devicetree@vger.kernel.org > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > .../devicetree/bindings/extcon/extcon-gpio.txt | 24 ++++++++++++++ > include/dt-bindings/extcon/connectors.h | 38 ++++++++++++++++++++++ > 2 files changed, 62 insertions(+) > create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt > create mode 100644 include/dt-bindings/extcon/connectors.h > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt > new file mode 100644 > index 000000000000..2f5e21b94a64 > --- /dev/null > +++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt > @@ -0,0 +1,24 @@ > +External Connector Using GPIO What kind of connector? All connectors external to something... And GPIO is not a kind of connector on its own, but an implementation. > + > +Required properties: > +- compatible: should be "extcon-gpio" > +- extcon-gpios: the GPIO lines used for the external connectors This doesn't tell me what the GPIOs functions are and should. For example we have hpd-gpios for HDMI hotplug detect in HDMI connector binding. > + See gpio/gpio.txt > +- extcon-connector-types: set to an unsigned integer value arrat representing the types > + of this connector, matched to the corresponding GPIO lines in the previous array. This should be determined by the compatible string. > + Those are defined with unique IDs in <dt-bindings/extcon/connectors.h> > +- input-debounce: The number of microseconds to wait for the > + connector state to stabilize. This property is reused from pin control > + See pinctrl/pinctrl-bindings.txt > + > +Example: > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/extcon/connectors.h> > + > +extcon { > + compatible = "extcon-gpio"; > + extcon-gpios = <&gpio0 42 GPIO_ACTIVE_LOW>; > + extcon-connector-types = <EXTCON_USB>; > + input-debounce = <20000>; /* 20 ms */ > +}; > diff --git a/include/dt-bindings/extcon/connectors.h b/include/dt-bindings/extcon/connectors.h > new file mode 100644 > index 000000000000..61bed24eaadc > --- /dev/null > +++ b/include/dt-bindings/extcon/connectors.h > @@ -0,0 +1,38 @@ > +#ifndef _DT_BINDINGS_EXTCON_CONNECTORS_H > +#define _DT_BINDINGS_EXTCON_CONNECTORS_H > + > +/* USB external connector */ > +#define EXTCON_USB 1 > +#define EXTCON_USB_HOST 2 > +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ > +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ > +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ > +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */ > +#define EXTCON_CHG_USB_FAST 9 > +#define EXTCON_CHG_USB_SLOW 10 > +#define EXTCON_CHG_WPT 11 /* Wireless Power Transfer */ > +#define EXTCON_CHG_USB_PD 12 /* USB Power Delivery */ These don't all look to be mutually exclusive. For USB PD, isn't that discoverable? > +/* Jack external connector */ > +#define EXTCON_JACK_MICROPHONE 20 > +#define EXTCON_JACK_HEADPHONE 21 > +#define EXTCON_JACK_LINE_IN 22 > +#define EXTCON_JACK_LINE_OUT 23 > +#define EXTCON_JACK_VIDEO_IN 24 > +#define EXTCON_JACK_VIDEO_OUT 25 > +#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */ > +#define EXTCON_JACK_SPDIF_OUT 27 > +/* Display external connector */ > +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */ > +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */ > +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */ > +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */ > +#define EXTCON_DISP_DP 44 /* Display Port */ > +#define EXTCON_DISP_HMD 45 /* Head-Mounted Display */ We already have connector bindings for most of these. Use those as a model for whatever you want to do. > +/* Miscellaneous external connector */ > +#define EXTCON_DOCK 60 > +#define EXTCON_JIG 61 > +#define EXTCON_MECHANICAL 62 > + > +#define EXTCON_NUM 63 > + > +#endif /* _DT_BINDINGS_EXTCON_CONNECTORS_H */ > -- > 2.13.5 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Sep 24, 2017 at 9:56 PM, Rob Herring <robh@kernel.org> wrote: > On Sun, Sep 24, 2017 at 9:56 AM, Linus Walleij <linus.walleij@linaro.org> wrote: >> Add some reasonable device tree bindings and also add the cable defines >> to the extcon include in <dt-bindings/extcon/connectors.h> since >> the GPIO extcon definately need to specify which cable/connector it is >> detecting. >> >> Adding the include file makes the (as it happens) Linux numbers into an >> ABI, but I do not see any better method. It is possible to define strings >> for all cable types but it seems like overkill, just reusing Linux' >> enumerators seems like a good idea. >> >> The binding supports any number of GPIOs and connectors, but the driver >> currently only supports one connector on one GPIO line. > > My view of extcon binding is it is fundamentally broken. I've > expressed this multiple times before. Sorry, I'm a newcomer in this area, so I was not aware of this. Since this is a new binding consumer, is it something we can use as role model to fix it? If I understand correctly from reading up on the mailing list the root of the problem is something like this: "extcon" is a linuxism and ambiguous. This driver should probe to "gpio-connector" or "gpio-switch" or something like that if it should be generic. Or use very domain-specific compatible strings (as you describe below), all supported maybe by the same driver in the end. The reason it is its own subsystem and not part of input (IIUC) is that other drivers need to subscribe to events from these connectors, they are not intended for userspace input such as keyboard or mice or similar. In the DTS file you will find stuff using extcons as resources with = <&extcon>; phandles so they can look them up and subscribe to events. Input has a whole slew of "events" that correspond to some of these but a different usecase, but that usecase is just a linuxism in turn, there is nothing saying another operating system could have a more versatile defintion of "input". Maybe from a hardware description PoV these should all move over to devicetree/bindings/input - they all provice an input signal to the system. The fact that Linux split a subset of these into "extcon" is of no concern to the DT bindings. Analogous with that some of the stuff in input/ should likely be moved to a new output/ directory. Such as pwm-beeper, pwm-vibrator etc. The fact that these are in the "input" subsystem in Linux is just another linuxism. > TL;DR: Anything extending the existing extcon binding will be NAKed. That can be a reasonable stance. I'm just trying to get this into a state where the code does not stand in the way of kernel clean-up. (Especially I want to get rid of the call to gpio_to_desc()) As stated in the cover letter the alternative will be to simply delete the driver. But it's better if I can fix the situation, we can't have it like this. >> +External Connector Using GPIO > > What kind of connector? All connectors external to something... And > GPIO is not a kind of connector on its own, but an implementation. Yeah that is a problem with the whole subsystem I guess. Should I add a paragraph describing the usecases? The whole thing is a bit of Androidism and is named like this because Android named it like this in their kernel tree. >> +Required properties: >> +- compatible: should be "extcon-gpio" >> +- extcon-gpios: the GPIO lines used for the external connectors > > This doesn't tell me what the GPIOs functions are and should. For > example we have hpd-gpios for HDMI hotplug detect in HDMI connector > binding. The idea is that this array corresponds to the extcon-connector-types right below, I'll clarify that if you think the overall idea is OK. >> + See gpio/gpio.txt >> +- extcon-connector-types: set to an unsigned integer value arrat representing the types >> + of this connector, matched to the corresponding GPIO lines in the previous array. > > This should be determined by the compatible string. So a GPIO connector is very versatile. It is "general purpose" by definition, so it needs to be subclassed. One possibility is to allow just one GPIO and have one comptible-string per use case. compatible = "gpio-usb-connector"; compatible = "gpio-charger-connector"; compatible = "gpio-headphone-connector"; etc etc These bindings on the other hand, assume that the driver will be able to handle an array of gpios with an associated array of connector types, which reflects how many of the existing extcon-type driver hardware works: a single PMIC providing some 5 misc extcons for example. For this reason there is a generic compatible string and then the device is subclassed per-gpio with the per-gpio connector type. >> +/* USB external connector */ >> +#define EXTCON_USB 1 >> +#define EXTCON_USB_HOST 2 >> +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ >> +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ >> +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ >> +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */ >> +#define EXTCON_CHG_USB_FAST 9 >> +#define EXTCON_CHG_USB_SLOW 10 >> +#define EXTCON_CHG_WPT 11 /* Wireless Power Transfer */ >> +#define EXTCON_CHG_USB_PD 12 /* USB Power Delivery */ > > These don't all look to be mutually exclusive. > > For USB PD, isn't that discoverable? Someone else would have to answer, this is based on the current connector types supported by the Linux kernel. >> +/* Display external connector */ >> +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */ >> +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */ >> +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */ >> +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */ >> +#define EXTCON_DISP_DP 44 /* Display Port */ >> +#define EXTCON_DISP_HMD 45 /* Head-Mounted Display */ > > We already have connector bindings for most of these. Use those as a > model for whatever you want to do. I guess they are not in Documentation/devicetree/bindings/extcon/* Please point me in the right direction and I'll check it out. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rob, On 2017년 09월 26일 09:39, Linus Walleij wrote: > On Sun, Sep 24, 2017 at 9:56 PM, Rob Herring <robh@kernel.org> wrote: >> On Sun, Sep 24, 2017 at 9:56 AM, Linus Walleij <linus.walleij@linaro.org> wrote: >>> Add some reasonable device tree bindings and also add the cable defines >>> to the extcon include in <dt-bindings/extcon/connectors.h> since >>> the GPIO extcon definately need to specify which cable/connector it is >>> detecting. >>> >>> Adding the include file makes the (as it happens) Linux numbers into an >>> ABI, but I do not see any better method. It is possible to define strings >>> for all cable types but it seems like overkill, just reusing Linux' >>> enumerators seems like a good idea. >>> >>> The binding supports any number of GPIOs and connectors, but the driver >>> currently only supports one connector on one GPIO line. >> >> My view of extcon binding is it is fundamentally broken. I've >> expressed this multiple times before. > > Sorry, I'm a newcomer in this area, so I was not aware of this. > > Since this is a new binding consumer, is it something we can use > as role model to fix it? > > If I understand correctly from reading up on the mailing list the root of the > problem is something like this: > > "extcon" is a linuxism and ambiguous. > > This driver should probe to "gpio-connector" or "gpio-switch" or something > like that if it should be generic. Or use very domain-specific compatible > strings (as you describe below), all supported maybe by the same driver > in the end. > > The reason it is its own subsystem and not part of input (IIUC) is that > other drivers need to subscribe to events from these connectors, > they are not intended for userspace input such as keyboard or mice > or similar. > > In the DTS file you will find stuff using extcons as resources with > = <&extcon>; phandles so they can look them up and subscribe > to events. > > Input has a whole slew of "events" that correspond to some of these > but a different usecase, but that usecase is just a linuxism in turn, there > is nothing saying another operating system could have a more versatile > defintion of "input". > > Maybe from a hardware description PoV these should all move over > to devicetree/bindings/input - they all provice an input signal to the > system. The fact that Linux split a subset of these into "extcon" > is of no concern to the DT bindings. > > Analogous with that some of the stuff in input/ should likely be > moved to a new output/ directory. Such as pwm-beeper, > pwm-vibrator etc. The fact that these are in the "input" subsystem > in Linux is just another linuxism. > >> TL;DR: Anything extending the existing extcon binding will be NAKed. > > That can be a reasonable stance. > > I'm just trying to get this into a state where the code does not stand in > the way of kernel clean-up. (Especially I want to get rid of the call > to gpio_to_desc()) > > As stated in the cover letter the alternative will be to simply delete > the driver. But it's better if I can fix the situation, we can't have it > like this. > >>> +External Connector Using GPIO >> >> What kind of connector? All connectors external to something... And >> GPIO is not a kind of connector on its own, but an implementation. > > Yeah that is a problem with the whole subsystem I guess. Should > I add a paragraph describing the usecases? > > The whole thing is a bit > of Androidism and is named like this because Android named it like > this in their kernel tree. > >>> +Required properties: >>> +- compatible: should be "extcon-gpio" >>> +- extcon-gpios: the GPIO lines used for the external connectors >> >> This doesn't tell me what the GPIOs functions are and should. For >> example we have hpd-gpios for HDMI hotplug detect in HDMI connector >> binding. > > The idea is that this array corresponds to the extcon-connector-types > right below, I'll clarify that if you think the overall idea is OK. > >>> + See gpio/gpio.txt >>> +- extcon-connector-types: set to an unsigned integer value arrat representing the types >>> + of this connector, matched to the corresponding GPIO lines in the previous array. >> >> This should be determined by the compatible string. > > So a GPIO connector is very versatile. It is "general purpose" by definition, > so it needs to be subclassed. > > One possibility is to allow just one GPIO and have one comptible-string per > use case. > compatible = "gpio-usb-connector"; > compatible = "gpio-charger-connector"; > compatible = "gpio-headphone-connector"; > etc etc > > These bindings on the other hand, assume that the driver will be able > to handle an array of gpios with an associated array of connector types, > which reflects how many of the existing extcon-type driver hardware works: > a single PMIC providing some 5 misc extcons for example. > > For this reason there is a generic compatible string and then the device > is subclassed per-gpio with the per-gpio connector type. > >>> +/* USB external connector */ >>> +#define EXTCON_USB 1 >>> +#define EXTCON_USB_HOST 2 >>> +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ >>> +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ >>> +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ >>> +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */ >>> +#define EXTCON_CHG_USB_FAST 9 >>> +#define EXTCON_CHG_USB_SLOW 10 >>> +#define EXTCON_CHG_WPT 11 /* Wireless Power Transfer */ >>> +#define EXTCON_CHG_USB_PD 12 /* USB Power Delivery */ >> >> These don't all look to be mutually exclusive. >> >> For USB PD, isn't that discoverable? Currently, EXTCON_CHG_USB_PD is not used on any extcon provider drivers. I think that EXTCON_CHG_USB_PD is discoverable according to the H/W design such as using ADC. Also, The charger connectors of extcon are related to power_supply subsystem because power_supply is in charge of behavior when the connector is attached/detached. So, the extcon defines the EXTCON_CHG_USB_PD in order to detect this type. > > Someone else would have to answer, this is based on the current > connector types supported by the Linux kernel. > >>> +/* Display external connector */ >>> +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */ >>> +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */ >>> +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */ >>> +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */ >>> +#define EXTCON_DISP_DP 44 /* Display Port */ >>> +#define EXTCON_DISP_HMD 45 /* Head-Mounted Display */ >> >> We already have connector bindings for most of these. Use those as a >> model for whatever you want to do. > > I guess they are not in Documentation/devicetree/bindings/extcon/* > > Please point me in the right direction and I'll check it out. > > Yours, > Linus Walleij > > >
Hi Rob, [snip] >> >>>> +External Connector Using GPIO >>> >>> What kind of connector? All connectors external to something... And >>> GPIO is not a kind of connector on its own, but an implementation. >> >> Yeah that is a problem with the whole subsystem I guess. Should >> I add a paragraph describing the usecases? >> >> The whole thing is a bit >> of Androidism and is named like this because Android named it like >> this in their kernel tree. >> >>>> +Required properties: >>>> +- compatible: should be "extcon-gpio" >>>> +- extcon-gpios: the GPIO lines used for the external connectors >>> >>> This doesn't tell me what the GPIOs functions are and should. For >>> example we have hpd-gpios for HDMI hotplug detect in HDMI connector >>> binding. >> >> The idea is that this array corresponds to the extcon-connector-types >> right below, I'll clarify that if you think the overall idea is OK. >> >>>> + See gpio/gpio.txt >>>> +- extcon-connector-types: set to an unsigned integer value arrat representing the types >>>> + of this connector, matched to the corresponding GPIO lines in the previous array. >>> >>> This should be determined by the compatible string. >> >> So a GPIO connector is very versatile. It is "general purpose" by definition, >> so it needs to be subclassed. >> >> One possibility is to allow just one GPIO and have one comptible-string per >> use case. >> compatible = "gpio-usb-connector"; >> compatible = "gpio-charger-connector"; >> compatible = "gpio-headphone-connector"; >> etc etc >> >> These bindings on the other hand, assume that the driver will be able >> to handle an array of gpios with an associated array of connector types, >> which reflects how many of the existing extcon-type driver hardware works: >> a single PMIC providing some 5 misc extcons for example. >> >> For this reason there is a generic compatible string and then the device >> is subclassed per-gpio with the per-gpio connector type. The "drivers/input/keyboard/gpio_keys.c" driver used the 'linux,code' property to get the key type as following in the device-tree file: gpio-keys { compatible = "gpio-keys"; key-1 { gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_1>; label = "SW2-1"; wakeup-source; }; key-2 { gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_2>; label = "SW2-2"; wakeup-source; }; }; IMO, extcon-gpio.c uses the 'gpio-connectors' compatible instead of 'extcon-gpio' and then define the connector type in the include/dt-bindings/extcon/connectors.h. How about this? For example, In the include/dt-bindings/extcon/connectors.h, #define CONNECTOR_USB 1 /* EXTCON_USB */ #define CONNECTOR_USB_HOST 2 /* EXTCON_USB_HOST */ #define CONNECTOR_CHG_USB_SDP 5 /* EXTCON_CHG_USB_SDP */ #define CONNECTOR_CHG_USB_DCP 6 /* EXTCON_CHG_USB_DCP */ #define CONNECTOR_CHG_USB_CDP 7 /* EXTCON_CHG_USB_CDP */ #define CONNECTOR_CHG_USB_ACA 8 /* EXTCON_CHG_USB_ACA */ ... #define CONNECTOR_HDMI 40 /* EXTCON_DISP_HDMI */ ... In the devicetree example for 'gpio-connectors', usb-connector { compatible = "gpio-connectors"; gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; linux,connector = <CONNECTOR_USB>; wakeup-source; }; hdmi-connector { gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; linux,connector = <CONNECTOR_HDMI>; wakeup-source; }; >> >>>> +/* USB external connector */ >>>> +#define EXTCON_USB 1 >>>> +#define EXTCON_USB_HOST 2 >>>> +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ >>>> +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ >>>> +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ >>>> +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */ >>>> +#define EXTCON_CHG_USB_FAST 9 >>>> +#define EXTCON_CHG_USB_SLOW 10 >>>> +#define EXTCON_CHG_WPT 11 /* Wireless Power Transfer */ >>>> +#define EXTCON_CHG_USB_PD 12 /* USB Power Delivery */ >>> >>> These don't all look to be mutually exclusive. >>> >>> For USB PD, isn't that discoverable? > > Currently, EXTCON_CHG_USB_PD is not used on any extcon provider drivers. > I think that EXTCON_CHG_USB_PD is discoverable according to the H/W design > such as using ADC. > > Also, The charger connectors of extcon are related to power_supply subsystem > because power_supply is in charge of behavior when the connector is attached/detached. > So, the extcon defines the EXTCON_CHG_USB_PD in order to detect this type. > >> >> Someone else would have to answer, this is based on the current >> connector types supported by the Linux kernel. >> >>>> +/* Display external connector */ >>>> +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */ >>>> +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */ >>>> +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */ >>>> +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */ >>>> +#define EXTCON_DISP_DP 44 /* Display Port */ >>>> +#define EXTCON_DISP_HMD 45 /* Head-Mounted Display */ >>> >>> We already have connector bindings for most of these. Use those as a >>> model for whatever you want to do. >> >> I guess they are not in Documentation/devicetree/bindings/extcon/* >> >> Please point me in the right direction and I'll check it out. >> >> Yours, >> Linus Walleij >> >> >> >
diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt new file mode 100644 index 000000000000..2f5e21b94a64 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt @@ -0,0 +1,24 @@ +External Connector Using GPIO + +Required properties: +- compatible: should be "extcon-gpio" +- extcon-gpios: the GPIO lines used for the external connectors + See gpio/gpio.txt +- extcon-connector-types: set to an unsigned integer value arrat representing the types + of this connector, matched to the corresponding GPIO lines in the previous array. + Those are defined with unique IDs in <dt-bindings/extcon/connectors.h> +- input-debounce: The number of microseconds to wait for the + connector state to stabilize. This property is reused from pin control + See pinctrl/pinctrl-bindings.txt + +Example: + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/extcon/connectors.h> + +extcon { + compatible = "extcon-gpio"; + extcon-gpios = <&gpio0 42 GPIO_ACTIVE_LOW>; + extcon-connector-types = <EXTCON_USB>; + input-debounce = <20000>; /* 20 ms */ +}; diff --git a/include/dt-bindings/extcon/connectors.h b/include/dt-bindings/extcon/connectors.h new file mode 100644 index 000000000000..61bed24eaadc --- /dev/null +++ b/include/dt-bindings/extcon/connectors.h @@ -0,0 +1,38 @@ +#ifndef _DT_BINDINGS_EXTCON_CONNECTORS_H +#define _DT_BINDINGS_EXTCON_CONNECTORS_H + +/* USB external connector */ +#define EXTCON_USB 1 +#define EXTCON_USB_HOST 2 +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */ +#define EXTCON_CHG_USB_FAST 9 +#define EXTCON_CHG_USB_SLOW 10 +#define EXTCON_CHG_WPT 11 /* Wireless Power Transfer */ +#define EXTCON_CHG_USB_PD 12 /* USB Power Delivery */ +/* Jack external connector */ +#define EXTCON_JACK_MICROPHONE 20 +#define EXTCON_JACK_HEADPHONE 21 +#define EXTCON_JACK_LINE_IN 22 +#define EXTCON_JACK_LINE_OUT 23 +#define EXTCON_JACK_VIDEO_IN 24 +#define EXTCON_JACK_VIDEO_OUT 25 +#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */ +#define EXTCON_JACK_SPDIF_OUT 27 +/* Display external connector */ +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */ +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */ +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */ +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */ +#define EXTCON_DISP_DP 44 /* Display Port */ +#define EXTCON_DISP_HMD 45 /* Head-Mounted Display */ +/* Miscellaneous external connector */ +#define EXTCON_DOCK 60 +#define EXTCON_JIG 61 +#define EXTCON_MECHANICAL 62 + +#define EXTCON_NUM 63 + +#endif /* _DT_BINDINGS_EXTCON_CONNECTORS_H */
Add some reasonable device tree bindings and also add the cable defines to the extcon include in <dt-bindings/extcon/connectors.h> since the GPIO extcon definately need to specify which cable/connector it is detecting. Adding the include file makes the (as it happens) Linux numbers into an ABI, but I do not see any better method. It is possible to define strings for all cable types but it seems like overkill, just reusing Linux' enumerators seems like a good idea. The binding supports any number of GPIOs and connectors, but the driver currently only supports one connector on one GPIO line. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../devicetree/bindings/extcon/extcon-gpio.txt | 24 ++++++++++++++ include/dt-bindings/extcon/connectors.h | 38 ++++++++++++++++++++++ 2 files changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt create mode 100644 include/dt-bindings/extcon/connectors.h