Message ID | 1506134733-30962-6-git-send-email-festevam@gmail.com |
---|---|
State | Accepted |
Commit | 464c988a1dd5356b84a375539d1a8d42c518a2db |
Delegated to: | Stefano Babic |
Headers | show |
Series | [U-Boot,1/6] mx6sabresd: Avoid calling setup_display() from SPL code | expand |
Hi
I tested this together with Anatolij's patch [1] on a Colibri iMX6. Both with the SPL and non SPL config the behaviour of the graphical output is as expected.
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Thanks Fabio.
Max
[1] http://patchwork.ozlabs.org/patch/806755
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index 756e3f3..a2a4214 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -630,9 +630,6 @@ int board_early_init_f(void) ARRAY_SIZE(pwr_intb_pads)); setup_iomux_uart(); -#if defined(CONFIG_VIDEO_IPUV3) - setup_display(); -#endif return 0; } @@ -653,6 +650,10 @@ int board_init(void) setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc); +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + #ifdef CONFIG_TDX_CMD_IMX_MFGR (void) pmic_init(); #endif