diff mbox series

powerpc: Implement cross-endian emulation of larx and stcx instructions

Message ID 20170904053402.GB16532@fergus.ozlabs.ibm.com (mailing list archive)
State Changes Requested
Headers show
Series powerpc: Implement cross-endian emulation of larx and stcx instructions | expand

Commit Message

Paul Mackerras Sept. 4, 2017, 5:34 a.m. UTC
This adds byte-swapping of the values loaded or stored by the
load with reservation (larx) and store conditional (stcx)
instructions when the execution environment being emulated has
the opposite endianness to the kernel.  This should have been done
in commit d955189ae427 ("powerpc: Handle opposite-endian processes
in emulation code", 2017-08-30) but was missed then.

Since op->reg is used quite frequently in emulate_loadstore(),
this puts op->reg into rd at the beginning of the function and
replaces subsequent uses of op->reg with rd.

This does not affect alignment interrupt handling, since these
instructions cannot be emulated when the address is not aligned,
because we have no way to do atomic unaligned accesses, in
general.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
---
 arch/powerpc/lib/sstep.c | 47 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 17 deletions(-)

Comments

Michael Ellerman March 26, 2018, 9:22 a.m. UTC | #1
Paul Mackerras <paulus@ozlabs.org> writes:
> diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
> index fb9f58b..0590417 100644
> --- a/arch/powerpc/lib/sstep.c
> +++ b/arch/powerpc/lib/sstep.c
> @@ -2755,8 +2761,11 @@ int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
>  			regs->dar = ea;
>  			break;
>  		}
> -		if (size < 16)
> -			regs->gpr[op->reg] = val;
> +		if (size < 16) {
> +			if (unlikely(cross_endian))
> +				val = byterev_8(val);

This doesn't build on 32-bit (pmac32_defconfig):

  arch/powerpc/lib/sstep.c: In function ‘emulate_loadstore’:
  arch/powerpc/lib/sstep.c:2789:11: error: implicit declaration of function ‘byterev_8’;did you mean ‘byterev_4’? [-Werror=implicit-function-declaration]
       val = byterev_8(val);
             ^~~~~~~~~
             byterev_4

cheers
diff mbox series

Patch

diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index fb9f58b..0590417 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -2719,6 +2719,7 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 	type = op->type & INSTR_TYPE_MASK;
 	cross_endian = (regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE);
 	ea = truncate_if_32bit(regs->msr, op->ea);
+	rd = op->reg;
 
 	switch (type) {
 	case LARX:
@@ -2745,7 +2746,12 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 			__get_user_asmx(val, ea, err, "ldarx");
 			break;
 		case 16:
-			err = do_lqarx(ea, &regs->gpr[op->reg]);
+			err = do_lqarx(ea, &regs->gpr[rd]);
+			if (unlikely(cross_endian)) {
+				val = byterev_8(regs->gpr[rd]);
+				regs->gpr[rd] = byterev_8(regs->gpr[rd + 1]);
+				regs->gpr[rd + 1] = val;
+			}
 			break;
 #endif
 		default:
@@ -2755,8 +2761,11 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 			regs->dar = ea;
 			break;
 		}
-		if (size < 16)
-			regs->gpr[op->reg] = val;
+		if (size < 16) {
+			if (unlikely(cross_endian))
+				val = byterev_8(val);
+			regs->gpr[rd] = val;
+		}
 		break;
 
 	case STCX:
@@ -2764,6 +2773,8 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 			return -EACCES;		/* can't handle misaligned */
 		if (!address_ok(regs, ea, size))
 			return -EFAULT;
+		if (unlikely(cross_endian))
+			do_byterev(&op->val, size);
 		err = 0;
 		switch (size) {
 #ifdef __powerpc64__
@@ -2782,8 +2793,12 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 			__put_user_asmx(op->val, ea, err, "stdcx.", cr);
 			break;
 		case 16:
-			err = do_stqcx(ea, regs->gpr[op->reg],
-				       regs->gpr[op->reg + 1], &cr);
+			if (unlikely(cross_endian))
+				err = do_stqcx(ea, byterev_8(regs->gpr[rd + 1]),
+					       op->val, &cr);
+			else
+				err = do_stqcx(ea, op->val, regs->gpr[rd + 1],
+					       &cr);
 			break;
 #endif
 		default:
@@ -2800,16 +2815,16 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 	case LOAD:
 #ifdef __powerpc64__
 		if (size == 16) {
-			err = emulate_lq(regs, ea, op->reg, cross_endian);
+			err = emulate_lq(regs, ea, rd, cross_endian);
 			break;
 		}
 #endif
-		err = read_mem(&regs->gpr[op->reg], ea, size, regs);
+		err = read_mem(&regs->gpr[rd], ea, size, regs);
 		if (!err) {
 			if (op->type & SIGNEXT)
-				do_signext(&regs->gpr[op->reg], size);
+				do_signext(&regs->gpr[rd], size);
 			if ((op->type & BYTEREV) == (cross_endian ? 0 : BYTEREV))
-				do_byterev(&regs->gpr[op->reg], size);
+				do_byterev(&regs->gpr[rd], size);
 		}
 		break;
 
@@ -2830,7 +2845,7 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 	case LOAD_VMX:
 		if (!(regs->msr & MSR_PR) && !(regs->msr & MSR_VEC))
 			return 0;
-		err = do_vec_load(op->reg, ea, size, regs, cross_endian);
+		err = do_vec_load(rd, ea, size, regs, cross_endian);
 		break;
 #endif
 #ifdef CONFIG_VSX
@@ -2841,7 +2856,7 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 		 * Some VSX instructions check the MSR_VEC bit rather than MSR_VSX
 		 * when the target of the instruction is a vector register.
 		 */
-		if (op->reg >= 32 && (op->vsx_flags & VSX_CHECK_VEC))
+		if (rd >= 32 && (op->vsx_flags & VSX_CHECK_VEC))
 			msrbit = MSR_VEC;
 		if (!(regs->msr & MSR_PR) && !(regs->msr & msrbit))
 			return 0;
@@ -2852,7 +2867,6 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 	case LOAD_MULTI:
 		if (!address_ok(regs, ea, size))
 			return -EFAULT;
-		rd = op->reg;
 		for (i = 0; i < size; i += 4) {
 			unsigned int v32 = 0;
 
@@ -2874,12 +2888,12 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 	case STORE:
 #ifdef __powerpc64__
 		if (size == 16) {
-			err = emulate_stq(regs, ea, op->reg, cross_endian);
+			err = emulate_stq(regs, ea, rd, cross_endian);
 			break;
 		}
 #endif
 		if ((op->type & UPDATE) && size == sizeof(long) &&
-		    op->reg == 1 && op->update_reg == 1 &&
+		    rd == 1 && op->update_reg == 1 &&
 		    !(regs->msr & MSR_PR) &&
 		    ea >= regs->gpr[1] - STACK_INT_FRAME_SIZE) {
 			err = handle_stack_update(ea, regs);
@@ -2901,7 +2915,7 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 	case STORE_VMX:
 		if (!(regs->msr & MSR_PR) && !(regs->msr & MSR_VEC))
 			return 0;
-		err = do_vec_store(op->reg, ea, size, regs, cross_endian);
+		err = do_vec_store(rd, ea, size, regs, cross_endian);
 		break;
 #endif
 #ifdef CONFIG_VSX
@@ -2912,7 +2926,7 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 		 * Some VSX instructions check the MSR_VEC bit rather than MSR_VSX
 		 * when the target of the instruction is a vector register.
 		 */
-		if (op->reg >= 32 && (op->vsx_flags & VSX_CHECK_VEC))
+		if (rd >= 32 && (op->vsx_flags & VSX_CHECK_VEC))
 			msrbit = MSR_VEC;
 		if (!(regs->msr & MSR_PR) && !(regs->msr & msrbit))
 			return 0;
@@ -2923,7 +2937,6 @@  int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op)
 	case STORE_MULTI:
 		if (!address_ok(regs, ea, size))
 			return -EFAULT;
-		rd = op->reg;
 		for (i = 0; i < size; i += 4) {
 			unsigned int v32 = regs->gpr[rd];