[next-queue,v3] i40e/i40evf: organize and re-number feature flags

Message ID 20170901205407.41800-1-jeffrey.t.kirsher@intel.com
State Accepted
Delegated to: Jeff Kirsher
Headers show
Series
  • [next-queue,v3] i40e/i40evf: organize and re-number feature flags
Related show

Commit Message

Jeff Kirsher Sept. 1, 2017, 8:54 p.m.
From: Jacob Keller <jacob.e.keller@intel.com>

Now that we've reduced the number of flags, organize similar flags
together and re-number them accordingly.

Since we don't yet have more than 32 flags, we'll use a u32 for both the
hw_features and flag field. Should we gain more flags in the future, we
may need to convert to a u64 or separate flags out into two fields.

One alternative approach considered, but not implemented here, was to
use an enumeration for the flag variables, and create a macro
I40E_FLAG() which used string concatenation to generate BIT_ULL values.
This has the advantage of making the actual bit values compile-time
dynamic so that we do not need to worry about matching the order to the
bit value. However, this does produce a high level of code churn, and
makes it more difficult to read a dumped flags value when debugging.

v3: rebased patch based on the current dev-queue branch

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Mitch Williams <mitch.a.williams@intel.com>
Change-ID: I8653fff69453cd547d6fe98d29dfa9d8710387d1
---
 drivers/net/ethernet/intel/i40e/i40e.h         | 98 +++++++++++++-------------
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c |  6 +-
 drivers/net/ethernet/intel/i40evf/i40evf.h     | 32 ++++-----
 3 files changed, 68 insertions(+), 68 deletions(-)

Comments

Bowers, AndrewX Sept. 1, 2017, 9:37 p.m. | #1
> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces@osuosl.org] On
> Behalf Of Jeff Kirsher
> Sent: Friday, September 1, 2017 1:54 PM
> To: intel-wired-lan@lists.osuosl.org
> Subject: [Intel-wired-lan] [next-queue v3] i40e/i40evf: organize and re-
> number feature flags
> 
> From: Jacob Keller <jacob.e.keller@intel.com>
> 
> Now that we've reduced the number of flags, organize similar flags together
> and re-number them accordingly.
> 
> Since we don't yet have more than 32 flags, we'll use a u32 for both the
> hw_features and flag field. Should we gain more flags in the future, we may
> need to convert to a u64 or separate flags out into two fields.
> 
> One alternative approach considered, but not implemented here, was to use
> an enumeration for the flag variables, and create a macro
> I40E_FLAG() which used string concatenation to generate BIT_ULL values.
> This has the advantage of making the actual bit values compile-time dynamic
> so that we do not need to worry about matching the order to the bit value.
> However, this does produce a high level of code churn, and makes it more
> difficult to read a dumped flags value when debugging.
> 
> v3: rebased patch based on the current dev-queue branch
> 
> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
> Reviewed-by: Mitch Williams <mitch.a.williams@intel.com>
> Change-ID: I8653fff69453cd547d6fe98d29dfa9d8710387d1
> ---
>  drivers/net/ethernet/intel/i40e/i40e.h         | 98 +++++++++++++-------------
>  drivers/net/ethernet/intel/i40e/i40e_ethtool.c |  6 +-
>  drivers/net/ethernet/intel/i40evf/i40evf.h     | 32 ++++-----
>  3 files changed, 68 insertions(+), 68 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Jacob Keller Sept. 7, 2017, 10:21 p.m. | #2
> -----Original Message-----
> From: Kirsher, Jeffrey T
> Sent: Friday, September 01, 2017 1:54 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: Keller, Jacob E <jacob.e.keller@intel.com>
> Subject: [next-queue v3] i40e/i40evf: organize and re-number feature flags
> 
> From: Jacob Keller <jacob.e.keller@intel.com>
> 
> Now that we've reduced the number of flags, organize similar flags
> together and re-number them accordingly.
> 
> Since we don't yet have more than 32 flags, we'll use a u32 for both the
> hw_features and flag field. Should we gain more flags in the future, we
> may need to convert to a u64 or separate flags out into two fields.
> 
> One alternative approach considered, but not implemented here, was to
> use an enumeration for the flag variables, and create a macro
> I40E_FLAG() which used string concatenation to generate BIT_ULL values.
> This has the advantage of making the actual bit values compile-time
> dynamic so that we do not need to worry about matching the order to the
> bit value. However, this does produce a high level of code churn, and
> makes it more difficult to read a dumped flags value when debugging.
> 
> v3: rebased patch based on the current dev-queue branch
> 
> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
> Reviewed-by: Mitch Williams <mitch.a.williams@intel.com>
> Change-ID: I8653fff69453cd547d6fe98d29dfa9d8710387d1
> ---

This version has a u64 instead of u32 for the flags variable, and that causes cmpxchg warnings. I sent a v4 to resolve this.

Thanks,
Jake

Patch

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 4dc6d43f8812..18c453a3e728 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -403,57 +403,57 @@  struct i40e_pf {
 	struct timer_list service_timer;
 	struct work_struct service_task;
 
-	u64 hw_features;
-#define I40E_HW_RSS_AQ_CAPABLE			BIT_ULL(0)
-#define I40E_HW_128_QP_RSS_CAPABLE		BIT_ULL(1)
-#define I40E_HW_ATR_EVICT_CAPABLE		BIT_ULL(2)
-#define I40E_HW_WB_ON_ITR_CAPABLE		BIT_ULL(3)
-#define I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE	BIT_ULL(4)
-#define I40E_HW_NO_PCI_LINK_CHECK		BIT_ULL(5)
-#define I40E_HW_100M_SGMII_CAPABLE		BIT_ULL(6)
-#define I40E_HW_NO_DCB_SUPPORT			BIT_ULL(7)
-#define I40E_HW_USE_SET_LLDP_MIB		BIT_ULL(8)
-#define I40E_HW_GENEVE_OFFLOAD_CAPABLE		BIT_ULL(9)
-#define I40E_HW_PTP_L4_CAPABLE			BIT_ULL(10)
-#define I40E_HW_WOL_MC_MAGIC_PKT_WAKE		BIT_ULL(11)
-#define I40E_HW_MPLS_HDR_OFFLOAD_CAPABLE	BIT_ULL(12)
-#define I40E_HW_HAVE_CRT_RETIMER		BIT_ULL(13)
-#define I40E_HW_OUTER_UDP_CSUM_CAPABLE		BIT_ULL(14)
-#define I40E_HW_PHY_CONTROLS_LEDS		BIT_ULL(15)
-#define I40E_HW_STOP_FW_LLDP			BIT_ULL(16)
-#define I40E_HW_PORT_ID_VALID			BIT_ULL(17)
-#define I40E_HW_RESTART_AUTONEG			BIT_ULL(18)
+	u32 hw_features;
+#define I40E_HW_RSS_AQ_CAPABLE			BIT(0)
+#define I40E_HW_128_QP_RSS_CAPABLE		BIT(1)
+#define I40E_HW_ATR_EVICT_CAPABLE		BIT(2)
+#define I40E_HW_WB_ON_ITR_CAPABLE		BIT(3)
+#define I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE	BIT(4)
+#define I40E_HW_NO_PCI_LINK_CHECK		BIT(5)
+#define I40E_HW_100M_SGMII_CAPABLE		BIT(6)
+#define I40E_HW_NO_DCB_SUPPORT			BIT(7)
+#define I40E_HW_USE_SET_LLDP_MIB		BIT(8)
+#define I40E_HW_GENEVE_OFFLOAD_CAPABLE		BIT(9)
+#define I40E_HW_PTP_L4_CAPABLE			BIT(10)
+#define I40E_HW_WOL_MC_MAGIC_PKT_WAKE		BIT(11)
+#define I40E_HW_MPLS_HDR_OFFLOAD_CAPABLE	BIT(12)
+#define I40E_HW_HAVE_CRT_RETIMER		BIT(13)
+#define I40E_HW_OUTER_UDP_CSUM_CAPABLE		BIT(14)
+#define I40E_HW_PHY_CONTROLS_LEDS		BIT(15)
+#define I40E_HW_STOP_FW_LLDP			BIT(16)
+#define I40E_HW_PORT_ID_VALID			BIT(17)
+#define I40E_HW_RESTART_AUTONEG			BIT(18)
 
 	u64 flags;
-#define I40E_FLAG_RX_CSUM_ENABLED		BIT_ULL(1)
-#define I40E_FLAG_MSI_ENABLED			BIT_ULL(2)
-#define I40E_FLAG_MSIX_ENABLED			BIT_ULL(3)
-#define I40E_FLAG_HW_ATR_EVICT_ENABLED		BIT_ULL(4)
-#define I40E_FLAG_RSS_ENABLED			BIT_ULL(6)
-#define I40E_FLAG_VMDQ_ENABLED			BIT_ULL(7)
-#define I40E_FLAG_IWARP_ENABLED			BIT_ULL(10)
-#define I40E_FLAG_FILTER_SYNC			BIT_ULL(15)
-#define I40E_FLAG_SERVICE_CLIENT_REQUESTED	BIT_ULL(16)
-#define I40E_FLAG_SRIOV_ENABLED			BIT_ULL(19)
-#define I40E_FLAG_DCB_ENABLED			BIT_ULL(20)
-#define I40E_FLAG_FD_SB_ENABLED			BIT_ULL(21)
-#define I40E_FLAG_FD_ATR_ENABLED		BIT_ULL(22)
-#define I40E_FLAG_FD_SB_AUTO_DISABLED		BIT_ULL(23)
-#define I40E_FLAG_FD_ATR_AUTO_DISABLED		BIT_ULL(24)
-#define I40E_FLAG_PTP				BIT_ULL(25)
-#define I40E_FLAG_MFP_ENABLED			BIT_ULL(26)
-#define I40E_FLAG_UDP_FILTER_SYNC		BIT_ULL(27)
-#define I40E_FLAG_DCB_CAPABLE			BIT_ULL(29)
-#define I40E_FLAG_VEB_STATS_ENABLED		BIT_ULL(37)
-#define I40E_FLAG_LINK_POLLING_ENABLED		BIT_ULL(39)
-#define I40E_FLAG_VEB_MODE_ENABLED		BIT_ULL(40)
-#define I40E_FLAG_TRUE_PROMISC_SUPPORT		BIT_ULL(51)
-#define I40E_FLAG_CLIENT_RESET			BIT_ULL(54)
-#define I40E_FLAG_TEMP_LINK_POLLING		BIT_ULL(55)
-#define I40E_FLAG_CLIENT_L2_CHANGE		BIT_ULL(56)
-#define I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED	BIT_ULL(57)
-#define I40E_FLAG_LEGACY_RX			BIT_ULL(58)
-#define I40E_FLAG_SOURCE_PRUNING_DISABLED	BIT_ULL(59)
+#define I40E_FLAG_RX_CSUM_ENABLED		BIT(0)
+#define I40E_FLAG_MSI_ENABLED			BIT(1)
+#define I40E_FLAG_MSIX_ENABLED			BIT(2)
+#define I40E_FLAG_RSS_ENABLED			BIT(3)
+#define I40E_FLAG_VMDQ_ENABLED			BIT(4)
+#define I40E_FLAG_FILTER_SYNC			BIT(5)
+#define I40E_FLAG_SRIOV_ENABLED			BIT(6)
+#define I40E_FLAG_DCB_CAPABLE			BIT(7)
+#define I40E_FLAG_DCB_ENABLED			BIT(8)
+#define I40E_FLAG_FD_SB_ENABLED			BIT(9)
+#define I40E_FLAG_FD_ATR_ENABLED		BIT(10)
+#define I40E_FLAG_FD_SB_AUTO_DISABLED		BIT(11)
+#define I40E_FLAG_FD_ATR_AUTO_DISABLED		BIT(12)
+#define I40E_FLAG_MFP_ENABLED			BIT(13)
+#define I40E_FLAG_UDP_FILTER_SYNC		BIT(14)
+#define I40E_FLAG_HW_ATR_EVICT_ENABLED		BIT(15)
+#define I40E_FLAG_VEB_MODE_ENABLED		BIT(16)
+#define I40E_FLAG_VEB_STATS_ENABLED		BIT(17)
+#define I40E_FLAG_LINK_POLLING_ENABLED		BIT(18)
+#define I40E_FLAG_TRUE_PROMISC_SUPPORT		BIT(19)
+#define I40E_FLAG_TEMP_LINK_POLLING		BIT(20)
+#define I40E_FLAG_LEGACY_RX			BIT(21)
+#define I40E_FLAG_PTP				BIT(22)
+#define I40E_FLAG_IWARP_ENABLED			BIT(23)
+#define I40E_FLAG_SERVICE_CLIENT_REQUESTED	BIT(24)
+#define I40E_FLAG_CLIENT_L2_CHANGE		BIT(25)
+#define I40E_FLAG_CLIENT_RESET			BIT(26)
+#define I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED	BIT(27)
+#define I40E_FLAG_SOURCE_PRUNING_DISABLED	BIT(28)
 
 	struct i40e_client_instance *cinst;
 	bool stat_offsets_loaded;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 389e3903ec26..b531aa3cc2d5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -4095,7 +4095,7 @@  static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 	struct i40e_netdev_priv *np = netdev_priv(dev);
 	struct i40e_vsi *vsi = np->vsi;
 	struct i40e_pf *pf = vsi->back;
-	u64 orig_flags, new_flags, changed_flags;
+	u32 orig_flags, new_flags, changed_flags;
 	u32 i, j;
 
 	orig_flags = READ_ONCE(pf->flags);
@@ -4147,12 +4147,12 @@  static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 		return -EOPNOTSUPP;
 
 	/* Compare and exchange the new flags into place. If we failed, that
-	 * is if cmpxchg64 returns anything but the old value, this means that
+	 * is if cmpxchg returns anything but the old value, this means that
 	 * something else has modified the flags variable since we copied it
 	 * originally. We'll just punt with an error and log something in the
 	 * message buffer.
 	 */
-	if (cmpxchg64(&pf->flags, orig_flags, new_flags) != orig_flags) {
+	if (cmpxchg(&pf->flags, orig_flags, new_flags) != orig_flags) {
 		dev_warn(&pf->pdev->dev,
 			 "Unable to update pf->flags as it was modified by another thread...\n");
 		return -EAGAIN;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index 5982362c5643..de0af521d602 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -222,22 +222,22 @@  struct i40evf_adapter {
 
 	u32 flags;
 #define I40EVF_FLAG_RX_CSUM_ENABLED		BIT(0)
-#define I40EVF_FLAG_IMIR_ENABLED		BIT(5)
-#define I40EVF_FLAG_MQ_CAPABLE			BIT(6)
-#define I40EVF_FLAG_PF_COMMS_FAILED		BIT(8)
-#define I40EVF_FLAG_RESET_PENDING		BIT(9)
-#define I40EVF_FLAG_RESET_NEEDED		BIT(10)
-#define I40EVF_FLAG_WB_ON_ITR_CAPABLE		BIT(11)
-#define I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE	BIT(12)
-#define I40EVF_FLAG_ADDR_SET_BY_PF		BIT(13)
-#define I40EVF_FLAG_SERVICE_CLIENT_REQUESTED	BIT(14)
-#define I40EVF_FLAG_CLIENT_NEEDS_OPEN		BIT(15)
-#define I40EVF_FLAG_CLIENT_NEEDS_CLOSE		BIT(16)
-#define I40EVF_FLAG_CLIENT_NEEDS_L2_PARAMS	BIT(17)
-#define I40EVF_FLAG_PROMISC_ON			BIT(18)
-#define I40EVF_FLAG_ALLMULTI_ON			BIT(19)
-#define I40EVF_FLAG_LEGACY_RX			BIT(20)
-#define I40EVF_FLAG_REINIT_ITR_NEEDED		BIT(21)
+#define I40EVF_FLAG_IMIR_ENABLED		BIT(1)
+#define I40EVF_FLAG_MQ_CAPABLE			BIT(2)
+#define I40EVF_FLAG_PF_COMMS_FAILED		BIT(3)
+#define I40EVF_FLAG_RESET_PENDING		BIT(4)
+#define I40EVF_FLAG_RESET_NEEDED		BIT(5)
+#define I40EVF_FLAG_WB_ON_ITR_CAPABLE		BIT(6)
+#define I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE	BIT(7)
+#define I40EVF_FLAG_ADDR_SET_BY_PF		BIT(8)
+#define I40EVF_FLAG_SERVICE_CLIENT_REQUESTED	BIT(9)
+#define I40EVF_FLAG_CLIENT_NEEDS_OPEN		BIT(10)
+#define I40EVF_FLAG_CLIENT_NEEDS_CLOSE		BIT(11)
+#define I40EVF_FLAG_CLIENT_NEEDS_L2_PARAMS	BIT(12)
+#define I40EVF_FLAG_PROMISC_ON			BIT(13)
+#define I40EVF_FLAG_ALLMULTI_ON			BIT(14)
+#define I40EVF_FLAG_LEGACY_RX			BIT(15)
+#define I40EVF_FLAG_REINIT_ITR_NEEDED		BIT(16)
 /* duplicates for common code */
 #define I40E_FLAG_DCB_ENABLED			0
 #define I40E_FLAG_RX_CSUM_ENABLED		I40EVF_FLAG_RX_CSUM_ENABLED