@@ -1,7 +1,7 @@
# -*-Makefile-*-
SUBDIRS += asm
-ASM_OBJS = head.o lock.o misc.o kernel-wrapper.o rom_entry.o
+ASM_OBJS = head.o lock.o misc.o kernel-wrapper.o c1vc_entry.o
ASM=asm/built-in.o
# Add extra dependency to the kernel wrapper
new file mode 100644
@@ -0,0 +1,51 @@
+# IBM_PROLOG_BEGIN_TAG
+# This is an automatically generated prolog.
+#
+# $Source: src/usr/secureboot/base/rom_entry.S $
+#
+# OpenPOWER HostBoot Project
+#
+# COPYRIGHT International Business Machines Corp. 2013,2016
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# permissions and limitations under the License.
+#
+# IBM_PROLOG_END_TAG
+
+#.include "kernel/ppcconsts.S"
+
+.section .text
+
+.global __c1vc_verify
+.global __c1vc_sha512
+
+__c1vc_verify:
+__c1vc_sha512:
+
+ std %r2, 40(%r1)
+ mflr %r0
+ std %r0, 16(%r1)
+ stdu %r1, -128(%r1)
+ li %r2, 0
+ mtctr %r3
+ mr %r3, %r4
+ mr %r4, %r5
+ mr %r5, %r6
+ mr %r6, %r7
+ mr %r7, %r8
+ bctrl
+ addi %r1, %r1, 128
+ ld %r2, 40(%r1)
+ ld %r0, 16(%r1)
+ mtlr %r0
+ blr
+
deleted file mode 100644
@@ -1,52 +0,0 @@
-# IBM_PROLOG_BEGIN_TAG
-# This is an automatically generated prolog.
-#
-# $Source: src/usr/secureboot/base/rom_entry.S $
-#
-# OpenPOWER HostBoot Project
-#
-# COPYRIGHT International Business Machines Corp. 2013,2016
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# permissions and limitations under the License.
-#
-# IBM_PROLOG_END_TAG
-
-#.include "kernel/ppcconsts.S"
-
-.section .text
-
-.global call_rom_verify
-.global call_rom_SHA512
-
-call_rom_verify:
-call_rom_SHA512:
-
-call_rom_entry:
- std %r2, 40(%r1)
- mflr %r0
- std %r0, 16(%r1)
- stdu %r1, -128(%r1)
- li %r2, 0
- mtctr %r3
- mr %r3, %r4
- mr %r4, %r5
- mr %r5, %r6
- mr %r6, %r7
- mr %r7, %r8
- bctrl
- addi %r1, %r1, 128
- ld %r2, 40(%r1)
- ld %r0, 16(%r1)
- mtlr %r0
- blr
-
@@ -8,10 +8,11 @@ LIBSTB_SRCS = container.c rom.c tpm_chip.c stb.c
LIBSTB_OBJS = $(LIBSTB_SRCS:%.c=%.o)
LIBSTB = $(LIBSTB_DIR)/built-in.o
+include $(SRC)/$(LIBSTB_DIR)/cvc/Makefile.inc
include $(SRC)/$(LIBSTB_DIR)/drivers/Makefile.inc
include $(SRC)/$(LIBSTB_DIR)/tss/Makefile.inc
-$(LIBSTB): $(LIBSTB_OBJS:%=$(LIBSTB_DIR)/%) $(DRIVERS) $(TSS)
+$(LIBSTB): $(LIBSTB_OBJS:%=$(LIBSTB_DIR)/%) $(DRIVERS) $(TSS) $(CVC)
libstb/create-container: libstb/create-container.c
$(call Q, HOSTCC ,$(HOSTCC) $(HOSTCFLAGS) \
new file mode 100644
@@ -0,0 +1,11 @@
+# -*-Makefile-*-
+
+CVC_DIR = libstb/cvc
+
+SUBDIRS += $(CVC_DIR)
+
+CVC_SRCS = c1vc.c
+CVC_OBJS = $(CVC_SRCS:%.c=%.o)
+CVC = $(CVC_DIR)/built-in.o
+
+$(CVC): $(CVC_OBJS:%=$(CVC_DIR)/%)
new file mode 100644
@@ -0,0 +1,138 @@
+/* Copyright 2013-2016 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <chip.h>
+#include <xscom.h>
+#include <string.h>
+#include <skiboot.h>
+#include "../status_codes.h"
+#include "../rom.h"
+#include "c1vc.h"
+
+#define DRIVER_NAME "c1vc"
+
+#define SECURE_ROM_MEMORY_SIZE (16 * 1024)
+#define SECURE_ROM_XSCOM_ADDRESS 0x02020017
+
+/*
+ * From the source code of the ROM code
+ */
+#define SECURE_ROM_SHA512_OFFSET 0x20
+#define SECURE_ROM_VERIFY_OFFSET 0x30
+
+static const char *compat = "ibm,secureboot-v1";
+static void *securerom_addr = NULL;
+static sha2_hash_t *hw_key_hash = NULL;
+
+/*
+ * Assembly interfaces to call into ROM code.
+ * func_ptr is the ROM code function address, followed
+ * by additional parameters as necessary
+ */
+ROM_response __c1vc_verify(void *func_ptr, ROM_container_raw *container,
+ ROM_hw_params *params);
+void __c1vc_sha512(void *func_ptr, const uint8_t *data, size_t len,
+ uint8_t *digest);
+
+static int c1vc_verify(void *container)
+{
+ ROM_hw_params hw_params;
+ ROM_response rc;
+
+ memset(&hw_params, 0, sizeof(ROM_hw_params));
+ memcpy(&hw_params.hw_key_hash, hw_key_hash, sizeof(sha2_hash_t));
+ rc = __c1vc_verify(securerom_addr + SECURE_ROM_VERIFY_OFFSET,
+ (ROM_container_raw*) container, &hw_params);
+ if (rc != ROM_DONE) {
+ /*
+ * Verify failed. hw_params.log indicates what checking has
+ * failed. This will abort the boot process.
+ */
+ prlog(PR_ERR, "ROM: %s failed (rc=%d, hw_params.log=0x%llx)\n",
+ __func__, rc, be64_to_cpu(hw_params.log));
+ return STB_VERIFY_FAILED;
+ }
+ return 0;
+}
+
+static void c1vc_sha512(const uint8_t *data, size_t len, uint8_t *digest)
+{
+ memset(digest, 0, sizeof(sha2_hash_t));
+ __c1vc_sha512(securerom_addr + SECURE_ROM_SHA512_OFFSET,
+ data, len, digest);
+}
+
+static void c1vc_cleanup(void) {
+ if (securerom_addr)
+ free(securerom_addr);
+ hw_key_hash = NULL;
+}
+
+static struct container_verification_code c1vc = {
+ .name = DRIVER_NAME,
+ .verify = c1vc_verify,
+ .sha512 = c1vc_sha512,
+ .cleanup = c1vc_cleanup,
+};
+
+void c1vc_probe(const struct dt_node *node)
+{
+ /* This xscom register has the Secure ROM code base address */
+ const uint32_t reg_addr = SECURE_ROM_XSCOM_ADDRESS;
+ uint64_t reg_data;
+ struct proc_chip *chip;
+ const char* hash_algo;
+
+ if (!dt_node_is_compatible(node, compat)) {
+ prlog(PR_DEBUG, "ROM: %s node is not compatible\n",
+ node->name);
+ return;
+ }
+ /*
+ * secureboot-v1 defines containers with sha512 hashes
+ */
+ hash_algo = dt_prop_get(node, "hash-algo");
+ if (strcmp(hash_algo, "sha512")) {
+ /**
+ * @fwts-label ROMHashAlgorithmInvalid
+ * @fwts-advice Hostboot creates the ibm,secureboot node and
+ * the hash-algo property. Check that the ibm,secureboot node
+ * layout has not changed.
+ */
+ prlog(PR_ERR, "ROM: hash-algo=%s not expected\n", hash_algo);
+ return;
+ }
+ hw_key_hash = (sha2_hash_t*) dt_prop_get(node, "hw-key-hash");
+ securerom_addr = malloc(SECURE_ROM_MEMORY_SIZE);
+ assert(securerom_addr);
+ /*
+ * The logic that contains the ROM within the processor is implemented
+ * in a way that it only responds to CI (cache inhibited) operations.
+ * Due to performance issues we copy the verification code from the
+ * secure ROM to RAM and we use memcpy_from_ci to do that.
+ */
+ chip = next_chip(NULL);
+ xscom_read(chip->id, reg_addr, ®_data);
+ memcpy_from_ci(securerom_addr, (void*) reg_data,
+ SECURE_ROM_MEMORY_SIZE);
+ /*
+ * Skiboot runs with IR (Instruction Relocation) &
+ * DR (Data Relocation) off, so there is no need to either MMIO
+ * the ROM code or set the memory region as executable.
+ * skiboot accesses the physical memory directly. Real mode.
+ */
+ rom_set_driver(&c1vc);
+}
new file mode 100644
@@ -0,0 +1,24 @@
+/* Copyright 2013-2016 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __C1VC_H
+#define __C1VC_H
+
+#include <device.h>
+
+extern void c1vc_probe(const struct dt_node *node);
+
+#endif /* __C1VC_H */
@@ -4,7 +4,7 @@ DRIVERS_DIR = libstb/drivers
SUBDIRS += $(DRIVERS_DIR)
-DRIVERS_SRCS = romcode.c tpm_i2c_interface.c tpm_i2c_nuvoton.c sw_driver.c sha512.c
+DRIVERS_SRCS = tpm_i2c_interface.c tpm_i2c_nuvoton.c sw_driver.c sha512.c
DRIVERS_OBJS = $(DRIVERS_SRCS:%.c=%.o)
DRIVERS = $(DRIVERS_DIR)/built-in.o
deleted file mode 100644
@@ -1,138 +0,0 @@
-/* Copyright 2013-2016 IBM Corp.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
- * implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <chip.h>
-#include <xscom.h>
-#include <string.h>
-#include <skiboot.h>
-#include "../status_codes.h"
-#include "../rom.h"
-#include "romcode.h"
-
-#define DRIVER_NAME "romcode"
-
-#define ROMCODE_MEMORY_SIZE (16 * 1024)
-#define ROMCODE_XSCOM_ADDRESS 0x02020017
-
-/*
- * From the source code of the ROM code
- */
-#define ROMCODE_SHA512_OFFSET 0x20
-#define ROMCODE_VERIFY_OFFSET 0x30
-
-static const char *compat = "ibm,secureboot-v1";
-static void *romcode_base_addr = NULL;
-static sha2_hash_t *hw_key_hash = NULL;
-
-/*
- * Assembly interfaces to call into ROM code.
- * func_ptr is the ROM code function address, followed
- * by additional parameters as necessary
- */
-ROM_response call_rom_verify(void *func_ptr, ROM_container_raw *container,
- ROM_hw_params *params);
-void call_rom_SHA512(void *func_ptr, const uint8_t *data, size_t len,
- uint8_t *digest);
-
-static int romcode_verify(void *container)
-{
- ROM_hw_params hw_params;
- ROM_response rc;
-
- memset(&hw_params, 0, sizeof(ROM_hw_params));
- memcpy(&hw_params.hw_key_hash, hw_key_hash, sizeof(sha2_hash_t));
- rc = call_rom_verify(romcode_base_addr + ROMCODE_VERIFY_OFFSET,
- (ROM_container_raw*) container, &hw_params);
- if (rc != ROM_DONE) {
- /*
- * Verify failed. hw_params.log indicates what checking has
- * failed. This will abort the boot process.
- */
- prlog(PR_ERR, "ROM: %s failed (rc=%d, hw_params.log=0x%llx)\n",
- __func__, rc, be64_to_cpu(hw_params.log));
- return STB_VERIFY_FAILED;
- }
- return 0;
-}
-
-static void romcode_sha512(const uint8_t *data, size_t len, uint8_t *digest)
-{
- memset(digest, 0, sizeof(sha2_hash_t));
- call_rom_SHA512(romcode_base_addr + ROMCODE_SHA512_OFFSET,
- data, len, digest);
-}
-
-static void romcode_cleanup(void) {
- if (romcode_base_addr)
- free(romcode_base_addr);
- hw_key_hash = NULL;
-}
-
-static struct container_verification_code c1vc = {
- .name = DRIVER_NAME,
- .verify = romcode_verify,
- .sha512 = romcode_sha512,
- .cleanup = romcode_cleanup
-};
-
-void romcode_probe(const struct dt_node *node)
-{
- /* This xscom register has the ROM code base address */
- const uint32_t reg_addr = ROMCODE_XSCOM_ADDRESS;
- uint64_t reg_data;
- struct proc_chip *chip;
- const char* hash_algo;
-
- if (!dt_node_is_compatible(node, compat)) {
- prlog(PR_DEBUG, "ROM: %s node is not compatible\n",
- node->name);
- return;
- }
- /*
- * secureboot-v1 defines containers with sha512 hashes
- */
- hash_algo = dt_prop_get(node, "hash-algo");
- if (strcmp(hash_algo, "sha512")) {
- /**
- * @fwts-label ROMHashAlgorithmInvalid
- * @fwts-advice Hostboot creates the ibm,secureboot node and
- * the hash-algo property. Check that the ibm,secureboot node
- * layout has not changed.
- */
- prlog(PR_ERR, "ROM: hash-algo=%s not expected\n", hash_algo);
- return;
- }
- hw_key_hash = (sha2_hash_t*) dt_prop_get(node, "hw-key-hash");
- romcode_base_addr = malloc(ROMCODE_MEMORY_SIZE);
- assert(romcode_base_addr);
- /*
- * The logic that contains the ROM within the processor is implemented
- * in a way that it only responds to CI (cache inhibited) operations.
- * Due to performance issues we copy the verification code from the
- * secure ROM to RAM and we use memcpy_from_ci to do that.
- */
- chip = next_chip(NULL);
- xscom_read(chip->id, reg_addr, ®_data);
- memcpy_from_ci(romcode_base_addr, (void*) reg_data,
- ROMCODE_MEMORY_SIZE);
- /*
- * Skiboot runs with IR (Instruction Relocation) &
- * DR (Data Relocation) off, so there is no need to either MMIO
- * the ROM code or set the memory region as executable.
- * skiboot accesses the physical memory directly. Real mode.
- */
- rom_set_driver(&c1vc);
-}
deleted file mode 100644
@@ -1,24 +0,0 @@
-/* Copyright 2013-2016 IBM Corp.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
- * implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __ROMCODE_H
-#define __ROMCODE_H
-
-#include <device.h>
-
-extern void romcode_probe(const struct dt_node *node);
-
-#endif /* __ROMCODE_H */
@@ -16,7 +16,7 @@
#include <skiboot.h>
#include "rom.h"
-#include "drivers/romcode.h"
+#include "cvc/c1vc.h"
#include "drivers/sw_driver.h"
static struct container_verification_code *c1vc = NULL;
@@ -26,8 +26,8 @@ struct container_verification_code* rom_init(const struct dt_node *node __unused
if (c1vc)
goto end;
- /* ROM drivers supported */
- romcode_probe(node);
+ /* CVC drivers supported */
+ c1vc_probe(node);
if (!c1vc)
stb_software_probe(node);
This gives a better name to the driver/romcode.* files and also moves them to a better place. The function names are also renamed accordingly. Romcode provides an API to access the functions provided by the container version 1 verification code (c1vc). Signed-off-by: Claudio Carvalho <cclaudio@linux.vnet.ibm.com> --- asm/Makefile.inc | 2 +- asm/c1vc_entry.S | 51 ++++++++++++++++ asm/rom_entry.S | 52 ----------------- libstb/Makefile.inc | 3 +- libstb/cvc/Makefile.inc | 11 ++++ libstb/cvc/c1vc.c | 138 ++++++++++++++++++++++++++++++++++++++++++++ libstb/cvc/c1vc.h | 24 ++++++++ libstb/drivers/Makefile.inc | 2 +- libstb/drivers/romcode.c | 138 -------------------------------------------- libstb/drivers/romcode.h | 24 -------- libstb/rom.c | 6 +- 11 files changed, 231 insertions(+), 220 deletions(-) create mode 100644 asm/c1vc_entry.S delete mode 100644 asm/rom_entry.S create mode 100644 libstb/cvc/Makefile.inc create mode 100644 libstb/cvc/c1vc.c create mode 100644 libstb/cvc/c1vc.h delete mode 100644 libstb/drivers/romcode.c delete mode 100644 libstb/drivers/romcode.h