diff mbox

[net-2.6,2/7] ixgbe: fix variable set but not used warnings by gcc 4.6

Message ID 1296195535-2990-3-git-send-email-jeffrey.t.kirsher@intel.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T Jan. 28, 2011, 6:18 a.m. UTC 
From: Emil Tantilov <emil.s.tantilov@intel.com>

Caught with gcc 4.6 -Wunused-but-set-variable

Remove unused napi_vectors variable.

Fix the use of reset_bit in ixgbe_reset_hw_X540()

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_main.c |    3 ---
 drivers/net/ixgbe/ixgbe_x540.c |    6 +++---
 2 files changed, 3 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 602078b..44a1cf0 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4863,16 +4863,13 @@  static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
 {
 	int q_idx, num_q_vectors;
 	struct ixgbe_q_vector *q_vector;
-	int napi_vectors;
 	int (*poll)(struct napi_struct *, int);
 
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
 		num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-		napi_vectors = adapter->num_rx_queues;
 		poll = &ixgbe_clean_rxtx_many;
 	} else {
 		num_q_vectors = 1;
-		napi_vectors = 1;
 		poll = &ixgbe_poll;
 	}
 
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index 3a89239..f2518b0 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -133,17 +133,17 @@  static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
 	}
 
 	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
-	IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | reset_bit));
 	IXGBE_WRITE_FLUSH(hw);
 
 	/* Poll for reset bit to self-clear indicating reset is complete */
 	for (i = 0; i < 10; i++) {
 		udelay(1);
 		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
-		if (!(ctrl & IXGBE_CTRL_RST))
+		if (!(ctrl & reset_bit))
 			break;
 	}
-	if (ctrl & IXGBE_CTRL_RST) {
+	if (ctrl & reset_bit) {
 		status = IXGBE_ERR_RESET_FAILED;
 		hw_dbg(hw, "Reset polling failed to complete.\n");
 	}