diff mbox series

[U-Boot,v4,6/8] armv7: Add workaround for USB erratum A-009798

Message ID 20170828091533.15133-6-ran.wang_1@nxp.com
State Superseded
Delegated to: York Sun
Headers show
Series [U-Boot,v4,1/8] armv8: Add workaround for USB erratum A-009008 | expand

Commit Message

Ran Wang Aug. 28, 2017, 9:15 a.m. UTC 
The default setting for USB High Speed Squelch Threshold results
in a threshold close to or lower than 100mV. This leads to Receive
Compliance test failure for a 100mV threshold.

Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE
to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v4:
	Update commit message about register setting.
	Clean up the math in register setting.
	Redefine SQRXTUNE to make code clearer.

Change in v3:
- none

Change in v2:
	In function erratum_a009798():
	1.Put a blank line after variable declaration.

 arch/arm/cpu/armv7/ls102xa/Kconfig                |  8 +++++++-
 arch/arm/cpu/armv7/ls102xa/soc.c                  | 11 +++++++++++
 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h |  1 +
 3 files changed, 19 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 599cc28249..f09766cf03 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -6,6 +6,7 @@  config ARCH_LS1021A
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 	select SYS_FSL_DDR_BE if SYS_FSL_DDR
@@ -56,7 +57,12 @@  config SYS_FSL_ERRATUM_A010315
 config SYS_FSL_ERRATUM_A009008
 	bool
 	help
-		Workaround for USB erratum A009008
+		Workaround for USB PHY erratum A009008
+
+config SYS_FSL_ERRATUM_A009798
+	bool
+	help
+		Workaround for USB PHY erratum A009798
 
 config SYS_FSL_SRDS_1
 	bool
diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
index 0cdc625380..487b5cf0ec 100644
--- a/arch/arm/cpu/armv7/ls102xa/soc.c
+++ b/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -72,6 +72,16 @@  static void erratum_a009008(void)
 #endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
 }
 
+static void erratum_a009798(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009798
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+	u32 val = in_be32(scfg + SCFG_USB3PRM1CR / 4);
+
+	val &= ~(SCFG_USB_SQRXTUNE_MASK << 23);
+	out_be32(scfg + SCFG_USB3PRM1CR / 4, val);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
+}
 
 void s_init(void)
 {
@@ -161,6 +171,7 @@  int arch_soc_init(void)
 
 	/* Erratum */
 	erratum_a009008();
+	erratum_a009798();
 
 	return 0;
 }
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index ba59f40382..5762d3308a 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -176,6 +176,7 @@  struct ccsr_gur {
 #define SCFG_BASE			0x01570000
 #define SCFG_USB3PRM1CR			0x070
 #define SCFG_USB_TXVREFTUNE		0x9
+#define SCFG_USB_SQRXTUNE_MASK		0x7
 
 /* Supplemental Configuration Unit */
 struct ccsr_scfg {