diff mbox

[U-Boot,1/2] README: add description of sh_eth driver

Message ID 4D40C4FB.5080203@renesas.com
State Accepted, archived
Delegated to: Nobuhiro Iwamatsu
Headers show

Commit Message

Yoshihiro Shimoda Jan. 27, 2011, 1:06 a.m. UTC
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 README |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

Comments

Nobuhiro Iwamatsu Jan. 31, 2011, 1:15 a.m. UTC | #1
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Ben's -net tree is not working for a long time.
Wolfgang, can I merge these patches to -sh tree?

Best regards,
	   Nobuhiro

On Thu, Jan 27, 2011 at 10:06:03AM +0900, Yoshihiro Shimoda wrote:
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
>  README |    9 +++++++++
>  1 files changed, 9 insertions(+), 0 deletions(-)
> 
> diff --git a/README b/README
> index d7a23cd..41458a3 100644
> --- a/README
> +++ b/README
> @@ -888,6 +888,15 @@ The following options need to be configured:
>  			automatically converts one 32 bit word to two 16 bit
>  			words you may also try CONFIG_SMC911X_32_BIT.
> 
> +		CONFIG_SH_ETHER
> +		Support for Renesas on-chip Ethernet controller
> +
> +			CONFIG_SH_ETHER_USE_PORT
> +			Define the number of ports to be used
> +
> +			CONFIG_SH_ETHER_PHY_ADDR
> +			Define the ETH PHY's address
> +
>  - USB Support:
>  		At the moment only the UHCI host controller is
>  		supported (PIP405, MIP405, MPC5200); define
> -- 
> 1.7.1
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
diff mbox

Patch

diff --git a/README b/README
index d7a23cd..41458a3 100644
--- a/README
+++ b/README
@@ -888,6 +888,15 @@  The following options need to be configured:
 			automatically converts one 32 bit word to two 16 bit
 			words you may also try CONFIG_SMC911X_32_BIT.

+		CONFIG_SH_ETHER
+		Support for Renesas on-chip Ethernet controller
+
+			CONFIG_SH_ETHER_USE_PORT
+			Define the number of ports to be used
+
+			CONFIG_SH_ETHER_PHY_ADDR
+			Define the ETH PHY's address
+
 - USB Support:
 		At the moment only the UHCI host controller is
 		supported (PIP405, MIP405, MPC5200); define