| Message ID | 1503602048-12268-11-git-send-email-armbru@redhat.com |
|---|---|
| State | New |
| Headers | show |
On Thu, Aug 24, 2017 at 9:18 PM Markus Armbruster <armbru@redhat.com> wrote: > Signed-off-by: Markus Armbruster <armbru@redhat.com> > Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> --- > MAINTAINERS | 1 + > Makefile | 1 + > qapi-schema.json | 151 > +---------------------------------------------- > qapi/transaction.json | 158 > ++++++++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 161 insertions(+), 150 deletions(-) > create mode 100644 qapi/transaction.json > > diff --git a/MAINTAINERS b/MAINTAINERS > index baa9859..8cebd79 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1231,6 +1231,7 @@ S: Supported > F: blockdev.c > F: block/qapi.c > F: qapi/block*.json > +F: qapi/transaction.json > T: git git://repo.or.cz/qemu/armbru.git block-next > > Dirty Bitmaps > diff --git a/Makefile b/Makefile > index 18cf670..ea6de37 100644 > --- a/Makefile > +++ b/Makefile > @@ -419,6 +419,7 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json > $(SRC_PATH)/qapi/common.json \ > $(SRC_PATH)/qapi/run-state.json \ > $(SRC_PATH)/qapi/sockets.json \ > $(SRC_PATH)/qapi/trace.json \ > + $(SRC_PATH)/qapi/transaction.json \ > $(SRC_PATH)/qapi/ui.json > > qapi-types.c qapi-types.h :\ > diff --git a/qapi-schema.json b/qapi-schema.json > index 21f54ea..4108ef0 100644 > --- a/qapi-schema.json > +++ b/qapi-schema.json > @@ -88,6 +88,7 @@ > { 'include': 'qapi/rocker.json' } > { 'include': 'qapi/ui.json' } > { 'include': 'qapi/migration.json' } > +{ 'include': 'qapi/transaction.json' } > { 'include': 'qapi/event.json' } > { 'include': 'qapi/trace.json' } > { 'include': 'qapi/introspect.json' } > @@ -1097,156 +1098,6 @@ > { 'command': 'balloon', 'data': {'value': 'int'} } > > ## > -# @Abort: > -# > -# This action can be used to test transaction failure. > -# > -# Since: 1.6 > -## > -{ 'struct': 'Abort', > - 'data': { } } > - > -## > -# @ActionCompletionMode: > -# > -# An enumeration of Transactional completion modes. > -# > -# @individual: Do not attempt to cancel any other Actions if any Actions > fail > -# after the Transaction request succeeds. All Actions that > -# can complete successfully will do so without waiting on > others. > -# This is the default. > -# > -# @grouped: If any Action fails after the Transaction succeeds, cancel all > -# Actions. Actions do not complete until all Actions are ready > to > -# complete. May be rejected by Actions that do not support this > -# completion mode. > -# > -# Since: 2.5 > -## > -{ 'enum': 'ActionCompletionMode', > - 'data': [ 'individual', 'grouped' ] } > - > -## > -# @TransactionAction: > -# > -# A discriminated record of operations that can be performed with > -# @transaction. Action @type can be: > -# > -# - @abort: since 1.6 > -# - @block-dirty-bitmap-add: since 2.5 > -# - @block-dirty-bitmap-clear: since 2.5 > -# - @blockdev-backup: since 2.3 > -# - @blockdev-snapshot: since 2.5 > -# - @blockdev-snapshot-internal-sync: since 1.7 > -# - @blockdev-snapshot-sync: since 1.1 > -# - @drive-backup: since 1.6 > -# > -# Since: 1.1 > -## > -{ 'union': 'TransactionAction', > - 'data': { > - 'abort': 'Abort', > - 'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd', > - 'block-dirty-bitmap-clear': 'BlockDirtyBitmap', > - 'blockdev-backup': 'BlockdevBackup', > - 'blockdev-snapshot': 'BlockdevSnapshot', > - 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal', > - 'blockdev-snapshot-sync': 'BlockdevSnapshotSync', > - 'drive-backup': 'DriveBackup' > - } } > - > -## > -# @TransactionProperties: > -# > -# Optional arguments to modify the behavior of a Transaction. > -# > -# @completion-mode: Controls how jobs launched asynchronously by > -# Actions will complete or fail as a group. > -# See @ActionCompletionMode for details. > -# > -# Since: 2.5 > -## > -{ 'struct': 'TransactionProperties', > - 'data': { > - '*completion-mode': 'ActionCompletionMode' > - } > -} > - > -## > -# @transaction: > -# > -# Executes a number of transactionable QMP commands atomically. If any > -# operation fails, then the entire set of actions will be abandoned and > the > -# appropriate error returned. > -# > -# For external snapshots, the dictionary contains the device, the file to > use for > -# the new snapshot, and the format. The default format, if not > specified, is > -# qcow2. > -# > -# Each new snapshot defaults to being created by QEMU (wiping any > -# contents if the file already exists), but it is also possible to reuse > -# an externally-created file. In the latter case, you should ensure that > -# the new image file has the same contents as the current one; QEMU cannot > -# perform any meaningful check. Typically this is achieved by using the > -# current image file as the backing file for the new image. > -# > -# On failure, the original disks pre-snapshot attempt will be used. > -# > -# For internal snapshots, the dictionary contains the device and the > snapshot's > -# name. If an internal snapshot matching name already exists, the > request will > -# be rejected. Only some image formats support it, for example, qcow2, > rbd, > -# and sheepdog. > -# > -# On failure, qemu will try delete the newly created internal snapshot in > the > -# transaction. When an I/O error occurs during deletion, the user needs > to fix > -# it later with qemu-img or other command. > -# > -# @actions: List of @TransactionAction; > -# information needed for the respective operations. > -# > -# @properties: structure of additional options to control the > -# execution of the transaction. See @TransactionProperties > -# for additional detail. > -# > -# Returns: nothing on success > -# > -# Errors depend on the operations of the transaction > -# > -# Note: The transaction aborts on the first failure. Therefore, there > will be > -# information on only one failed operation returned in an error > condition, and > -# subsequent actions will not have been attempted. > -# > -# Since: 1.1 > -# > -# Example: > -# > -# -> { "execute": "transaction", > -# "arguments": { "actions": [ > -# { "type": "blockdev-snapshot-sync", "data" : { "device": > "ide-hd0", > -# "snapshot-file": > "/some/place/my-image", > -# "format": "qcow2" } }, > -# { "type": "blockdev-snapshot-sync", "data" : { "node-name": > "myfile", > -# "snapshot-file": > "/some/place/my-image2", > -# "snapshot-node-name": "node3432", > -# "mode": "existing", > -# "format": "qcow2" } }, > -# { "type": "blockdev-snapshot-sync", "data" : { "device": > "ide-hd1", > -# "snapshot-file": > "/some/place/my-image2", > -# "mode": "existing", > -# "format": "qcow2" } }, > -# { "type": "blockdev-snapshot-internal-sync", "data" : { > -# "device": "ide-hd2", > -# "name": "snapshot0" } } ] } } > -# <- { "return": {} } > -# > -## > -{ 'command': 'transaction', > - 'data': { 'actions': [ 'TransactionAction' ], > - '*properties': 'TransactionProperties' > - } > -} > - > -## > # @human-monitor-command: > # > # Execute a command on the human monitor and return the output. > diff --git a/qapi/transaction.json b/qapi/transaction.json > new file mode 100644 > index 0000000..bd31279 > --- /dev/null > +++ b/qapi/transaction.json > @@ -0,0 +1,158 @@ > +# -*- Mode: Python -*- > +# > + > +## > +# = Transactions > +## > + > +{ 'include': 'block.json' } > + > +## > +# @Abort: > +# > +# This action can be used to test transaction failure. > +# > +# Since: 1.6 > +## > +{ 'struct': 'Abort', > + 'data': { } } > + > +## > +# @ActionCompletionMode: > +# > +# An enumeration of Transactional completion modes. > +# > +# @individual: Do not attempt to cancel any other Actions if any Actions > fail > +# after the Transaction request succeeds. All Actions that > +# can complete successfully will do so without waiting on > others. > +# This is the default. > +# > +# @grouped: If any Action fails after the Transaction succeeds, cancel all > +# Actions. Actions do not complete until all Actions are ready > to > +# complete. May be rejected by Actions that do not support this > +# completion mode. > +# > +# Since: 2.5 > +## > +{ 'enum': 'ActionCompletionMode', > + 'data': [ 'individual', 'grouped' ] } > + > +## > +# @TransactionAction: > +# > +# A discriminated record of operations that can be performed with > +# @transaction. Action @type can be: > +# > +# - @abort: since 1.6 > +# - @block-dirty-bitmap-add: since 2.5 > +# - @block-dirty-bitmap-clear: since 2.5 > +# - @blockdev-backup: since 2.3 > +# - @blockdev-snapshot: since 2.5 > +# - @blockdev-snapshot-internal-sync: since 1.7 > +# - @blockdev-snapshot-sync: since 1.1 > +# - @drive-backup: since 1.6 > +# > +# Since: 1.1 > +## > +{ 'union': 'TransactionAction', > + 'data': { > + 'abort': 'Abort', > + 'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd', > + 'block-dirty-bitmap-clear': 'BlockDirtyBitmap', > + 'blockdev-backup': 'BlockdevBackup', > + 'blockdev-snapshot': 'BlockdevSnapshot', > + 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal', > + 'blockdev-snapshot-sync': 'BlockdevSnapshotSync', > + 'drive-backup': 'DriveBackup' > + } } > + > +## > +# @TransactionProperties: > +# > +# Optional arguments to modify the behavior of a Transaction. > +# > +# @completion-mode: Controls how jobs launched asynchronously by > +# Actions will complete or fail as a group. > +# See @ActionCompletionMode for details. > +# > +# Since: 2.5 > +## > +{ 'struct': 'TransactionProperties', > + 'data': { > + '*completion-mode': 'ActionCompletionMode' > + } > +} > + > +## > +# @transaction: > +# > +# Executes a number of transactionable QMP commands atomically. If any > +# operation fails, then the entire set of actions will be abandoned and > the > +# appropriate error returned. > +# > +# For external snapshots, the dictionary contains the device, the file to > use for > +# the new snapshot, and the format. The default format, if not > specified, is > +# qcow2. > +# > +# Each new snapshot defaults to being created by QEMU (wiping any > +# contents if the file already exists), but it is also possible to reuse > +# an externally-created file. In the latter case, you should ensure that > +# the new image file has the same contents as the current one; QEMU cannot > +# perform any meaningful check. Typically this is achieved by using the > +# current image file as the backing file for the new image. > +# > +# On failure, the original disks pre-snapshot attempt will be used. > +# > +# For internal snapshots, the dictionary contains the device and the > snapshot's > +# name. If an internal snapshot matching name already exists, the > request will > +# be rejected. Only some image formats support it, for example, qcow2, > rbd, > +# and sheepdog. > +# > +# On failure, qemu will try delete the newly created internal snapshot in > the > +# transaction. When an I/O error occurs during deletion, the user needs > to fix > +# it later with qemu-img or other command. > +# > +# @actions: List of @TransactionAction; > +# information needed for the respective operations. > +# > +# @properties: structure of additional options to control the > +# execution of the transaction. See @TransactionProperties > +# for additional detail. > +# > +# Returns: nothing on success > +# > +# Errors depend on the operations of the transaction > +# > +# Note: The transaction aborts on the first failure. Therefore, there > will be > +# information on only one failed operation returned in an error > condition, and > +# subsequent actions will not have been attempted. > +# > +# Since: 1.1 > +# > +# Example: > +# > +# -> { "execute": "transaction", > +# "arguments": { "actions": [ > +# { "type": "blockdev-snapshot-sync", "data" : { "device": > "ide-hd0", > +# "snapshot-file": > "/some/place/my-image", > +# "format": "qcow2" } }, > +# { "type": "blockdev-snapshot-sync", "data" : { "node-name": > "myfile", > +# "snapshot-file": > "/some/place/my-image2", > +# "snapshot-node-name": "node3432", > +# "mode": "existing", > +# "format": "qcow2" } }, > +# { "type": "blockdev-snapshot-sync", "data" : { "device": > "ide-hd1", > +# "snapshot-file": > "/some/place/my-image2", > +# "mode": "existing", > +# "format": "qcow2" } }, > +# { "type": "blockdev-snapshot-internal-sync", "data" : { > +# "device": "ide-hd2", > +# "name": "snapshot0" } } ] } } > +# <- { "return": {} } > +# > +## > +{ 'command': 'transaction', > + 'data': { 'actions': [ 'TransactionAction' ], > + '*properties': 'TransactionProperties' > + } > +} > -- > 2.7.5 > > > -- Marc-André Lureau
diff --git a/MAINTAINERS b/MAINTAINERS index baa9859..8cebd79 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1231,6 +1231,7 @@ S: Supported F: blockdev.c F: block/qapi.c F: qapi/block*.json +F: qapi/transaction.json T: git git://repo.or.cz/qemu/armbru.git block-next Dirty Bitmaps diff --git a/Makefile b/Makefile index 18cf670..ea6de37 100644 --- a/Makefile +++ b/Makefile @@ -419,6 +419,7 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/qapi/common.json \ $(SRC_PATH)/qapi/run-state.json \ $(SRC_PATH)/qapi/sockets.json \ $(SRC_PATH)/qapi/trace.json \ + $(SRC_PATH)/qapi/transaction.json \ $(SRC_PATH)/qapi/ui.json qapi-types.c qapi-types.h :\ diff --git a/qapi-schema.json b/qapi-schema.json index 21f54ea..4108ef0 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -88,6 +88,7 @@ { 'include': 'qapi/rocker.json' } { 'include': 'qapi/ui.json' } { 'include': 'qapi/migration.json' } +{ 'include': 'qapi/transaction.json' } { 'include': 'qapi/event.json' } { 'include': 'qapi/trace.json' } { 'include': 'qapi/introspect.json' } @@ -1097,156 +1098,6 @@ { 'command': 'balloon', 'data': {'value': 'int'} } ## -# @Abort: -# -# This action can be used to test transaction failure. -# -# Since: 1.6 -## -{ 'struct': 'Abort', - 'data': { } } - -## -# @ActionCompletionMode: -# -# An enumeration of Transactional completion modes. -# -# @individual: Do not attempt to cancel any other Actions if any Actions fail -# after the Transaction request succeeds. All Actions that -# can complete successfully will do so without waiting on others. -# This is the default. -# -# @grouped: If any Action fails after the Transaction succeeds, cancel all -# Actions. Actions do not complete until all Actions are ready to -# complete. May be rejected by Actions that do not support this -# completion mode. -# -# Since: 2.5 -## -{ 'enum': 'ActionCompletionMode', - 'data': [ 'individual', 'grouped' ] } - -## -# @TransactionAction: -# -# A discriminated record of operations that can be performed with -# @transaction. Action @type can be: -# -# - @abort: since 1.6 -# - @block-dirty-bitmap-add: since 2.5 -# - @block-dirty-bitmap-clear: since 2.5 -# - @blockdev-backup: since 2.3 -# - @blockdev-snapshot: since 2.5 -# - @blockdev-snapshot-internal-sync: since 1.7 -# - @blockdev-snapshot-sync: since 1.1 -# - @drive-backup: since 1.6 -# -# Since: 1.1 -## -{ 'union': 'TransactionAction', - 'data': { - 'abort': 'Abort', - 'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd', - 'block-dirty-bitmap-clear': 'BlockDirtyBitmap', - 'blockdev-backup': 'BlockdevBackup', - 'blockdev-snapshot': 'BlockdevSnapshot', - 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal', - 'blockdev-snapshot-sync': 'BlockdevSnapshotSync', - 'drive-backup': 'DriveBackup' - } } - -## -# @TransactionProperties: -# -# Optional arguments to modify the behavior of a Transaction. -# -# @completion-mode: Controls how jobs launched asynchronously by -# Actions will complete or fail as a group. -# See @ActionCompletionMode for details. -# -# Since: 2.5 -## -{ 'struct': 'TransactionProperties', - 'data': { - '*completion-mode': 'ActionCompletionMode' - } -} - -## -# @transaction: -# -# Executes a number of transactionable QMP commands atomically. If any -# operation fails, then the entire set of actions will be abandoned and the -# appropriate error returned. -# -# For external snapshots, the dictionary contains the device, the file to use for -# the new snapshot, and the format. The default format, if not specified, is -# qcow2. -# -# Each new snapshot defaults to being created by QEMU (wiping any -# contents if the file already exists), but it is also possible to reuse -# an externally-created file. In the latter case, you should ensure that -# the new image file has the same contents as the current one; QEMU cannot -# perform any meaningful check. Typically this is achieved by using the -# current image file as the backing file for the new image. -# -# On failure, the original disks pre-snapshot attempt will be used. -# -# For internal snapshots, the dictionary contains the device and the snapshot's -# name. If an internal snapshot matching name already exists, the request will -# be rejected. Only some image formats support it, for example, qcow2, rbd, -# and sheepdog. -# -# On failure, qemu will try delete the newly created internal snapshot in the -# transaction. When an I/O error occurs during deletion, the user needs to fix -# it later with qemu-img or other command. -# -# @actions: List of @TransactionAction; -# information needed for the respective operations. -# -# @properties: structure of additional options to control the -# execution of the transaction. See @TransactionProperties -# for additional detail. -# -# Returns: nothing on success -# -# Errors depend on the operations of the transaction -# -# Note: The transaction aborts on the first failure. Therefore, there will be -# information on only one failed operation returned in an error condition, and -# subsequent actions will not have been attempted. -# -# Since: 1.1 -# -# Example: -# -# -> { "execute": "transaction", -# "arguments": { "actions": [ -# { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0", -# "snapshot-file": "/some/place/my-image", -# "format": "qcow2" } }, -# { "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile", -# "snapshot-file": "/some/place/my-image2", -# "snapshot-node-name": "node3432", -# "mode": "existing", -# "format": "qcow2" } }, -# { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1", -# "snapshot-file": "/some/place/my-image2", -# "mode": "existing", -# "format": "qcow2" } }, -# { "type": "blockdev-snapshot-internal-sync", "data" : { -# "device": "ide-hd2", -# "name": "snapshot0" } } ] } } -# <- { "return": {} } -# -## -{ 'command': 'transaction', - 'data': { 'actions': [ 'TransactionAction' ], - '*properties': 'TransactionProperties' - } -} - -## # @human-monitor-command: # # Execute a command on the human monitor and return the output. diff --git a/qapi/transaction.json b/qapi/transaction.json new file mode 100644 index 0000000..bd31279 --- /dev/null +++ b/qapi/transaction.json @@ -0,0 +1,158 @@ +# -*- Mode: Python -*- +# + +## +# = Transactions +## + +{ 'include': 'block.json' } + +## +# @Abort: +# +# This action can be used to test transaction failure. +# +# Since: 1.6 +## +{ 'struct': 'Abort', + 'data': { } } + +## +# @ActionCompletionMode: +# +# An enumeration of Transactional completion modes. +# +# @individual: Do not attempt to cancel any other Actions if any Actions fail +# after the Transaction request succeeds. All Actions that +# can complete successfully will do so without waiting on others. +# This is the default. +# +# @grouped: If any Action fails after the Transaction succeeds, cancel all +# Actions. Actions do not complete until all Actions are ready to +# complete. May be rejected by Actions that do not support this +# completion mode. +# +# Since: 2.5 +## +{ 'enum': 'ActionCompletionMode', + 'data': [ 'individual', 'grouped' ] } + +## +# @TransactionAction: +# +# A discriminated record of operations that can be performed with +# @transaction. Action @type can be: +# +# - @abort: since 1.6 +# - @block-dirty-bitmap-add: since 2.5 +# - @block-dirty-bitmap-clear: since 2.5 +# - @blockdev-backup: since 2.3 +# - @blockdev-snapshot: since 2.5 +# - @blockdev-snapshot-internal-sync: since 1.7 +# - @blockdev-snapshot-sync: since 1.1 +# - @drive-backup: since 1.6 +# +# Since: 1.1 +## +{ 'union': 'TransactionAction', + 'data': { + 'abort': 'Abort', + 'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd', + 'block-dirty-bitmap-clear': 'BlockDirtyBitmap', + 'blockdev-backup': 'BlockdevBackup', + 'blockdev-snapshot': 'BlockdevSnapshot', + 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal', + 'blockdev-snapshot-sync': 'BlockdevSnapshotSync', + 'drive-backup': 'DriveBackup' + } } + +## +# @TransactionProperties: +# +# Optional arguments to modify the behavior of a Transaction. +# +# @completion-mode: Controls how jobs launched asynchronously by +# Actions will complete or fail as a group. +# See @ActionCompletionMode for details. +# +# Since: 2.5 +## +{ 'struct': 'TransactionProperties', + 'data': { + '*completion-mode': 'ActionCompletionMode' + } +} + +## +# @transaction: +# +# Executes a number of transactionable QMP commands atomically. If any +# operation fails, then the entire set of actions will be abandoned and the +# appropriate error returned. +# +# For external snapshots, the dictionary contains the device, the file to use for +# the new snapshot, and the format. The default format, if not specified, is +# qcow2. +# +# Each new snapshot defaults to being created by QEMU (wiping any +# contents if the file already exists), but it is also possible to reuse +# an externally-created file. In the latter case, you should ensure that +# the new image file has the same contents as the current one; QEMU cannot +# perform any meaningful check. Typically this is achieved by using the +# current image file as the backing file for the new image. +# +# On failure, the original disks pre-snapshot attempt will be used. +# +# For internal snapshots, the dictionary contains the device and the snapshot's +# name. If an internal snapshot matching name already exists, the request will +# be rejected. Only some image formats support it, for example, qcow2, rbd, +# and sheepdog. +# +# On failure, qemu will try delete the newly created internal snapshot in the +# transaction. When an I/O error occurs during deletion, the user needs to fix +# it later with qemu-img or other command. +# +# @actions: List of @TransactionAction; +# information needed for the respective operations. +# +# @properties: structure of additional options to control the +# execution of the transaction. See @TransactionProperties +# for additional detail. +# +# Returns: nothing on success +# +# Errors depend on the operations of the transaction +# +# Note: The transaction aborts on the first failure. Therefore, there will be +# information on only one failed operation returned in an error condition, and +# subsequent actions will not have been attempted. +# +# Since: 1.1 +# +# Example: +# +# -> { "execute": "transaction", +# "arguments": { "actions": [ +# { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0", +# "snapshot-file": "/some/place/my-image", +# "format": "qcow2" } }, +# { "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile", +# "snapshot-file": "/some/place/my-image2", +# "snapshot-node-name": "node3432", +# "mode": "existing", +# "format": "qcow2" } }, +# { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1", +# "snapshot-file": "/some/place/my-image2", +# "mode": "existing", +# "format": "qcow2" } }, +# { "type": "blockdev-snapshot-internal-sync", "data" : { +# "device": "ide-hd2", +# "name": "snapshot0" } } ] } } +# <- { "return": {} } +# +## +{ 'command': 'transaction', + 'data': { 'actions': [ 'TransactionAction' ], + '*properties': 'TransactionProperties' + } +}
Signed-off-by: Markus Armbruster <armbru@redhat.com> --- MAINTAINERS | 1 + Makefile | 1 + qapi-schema.json | 151 +---------------------------------------------- qapi/transaction.json | 158 ++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 161 insertions(+), 150 deletions(-) create mode 100644 qapi/transaction.json