diff mbox

[U-Boot,2/2] OMAP3: DTS: Cleanup omap3_logic DTS files from OMAP3 resync

Message ID 1503580620-15568-2-git-send-email-aford173@gmail.com
State Superseded
Delegated to: Tom Rini
Headers show

Commit Message

Adam Ford Aug. 24, 2017, 1:17 p.m. UTC
logicpd-torpedo-som.dtsi is a direct port, but the
logicpd-torpedo-37xx-devkit is mostly copied from Linux, but
there are a few changes:

  Slow I2C1 to 400KHz from 26MHz, because U-Boot doesn't seem
   to handle that speed.

  Fixes required for U-Boot's NS16550 driver by adding
    reg-shift = <2> for each UART.

  Rename the model since this can booth both SOM-LV and Torpedo kits
   U-Boot will still load the proper dtb file from SD card for Linux

  Since there is only 1 support MMC socket on either dev kit,
   disable others in U-Boot

  Changes the license to SPDX

Signed-off-by: Adam Ford <aford173@gmail.com>
---
 arch/arm/dts/logicpd-torpedo-37xx-devkit.dts | 49 +++++++++++++++++++++-------
 arch/arm/dts/logicpd-torpedo-som.dtsi        | 35 ++++++++++++++++++--
 2 files changed, 70 insertions(+), 14 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
index de603a4..935dfae 100644
--- a/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
@@ -1,7 +1,10 @@ 
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Based on logicpd-torpedo-37xx-devkit.dts from Linux 4.13-RC5
+ *
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /dts-v1/;
@@ -11,13 +14,9 @@ 
 #include "omap-gpmc-smsc9221.dtsi"
 
 / {
-	model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
+	model = "LogicPD Zoom AM37xx / DM37xx Development Kit";
 	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
 
-	chosen {
-		stdout-path = &uart1;
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -86,6 +85,14 @@ 
 
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
 &vaux1 {
 	regulator-min-microvolt = <3000000>;
 	regulator-max-microvolt = <3000000>;
@@ -196,13 +203,18 @@ 
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>;		/* gpio127 */
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cap-power-off-card;
 };
 
 &mmc2 {
-	status = "disabled";
+      status = "disabled";
+};
+
+&mmc3 {
+      status = "disabled";
 };
 
 &omap3_pmx_core {
@@ -256,9 +268,9 @@ 
 			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
 			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
 
-			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
 			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
 			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
 			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
@@ -396,6 +408,19 @@ 
 
 &uart1 {
 	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+	reg-shift = <2>;
+};
+
+&uart2 {
+	reg-shift = <2>;
+};
+
+&uart3 {
+	reg-shift = <2>;
+};
+
+&uart4 {
+	reg-shift = <2>;
 };
 
 /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
diff --git a/arch/arm/dts/logicpd-torpedo-som.dtsi b/arch/arm/dts/logicpd-torpedo-som.dtsi
index 23c9228..6d89736 100644
--- a/arch/arm/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/dts/logicpd-torpedo-som.dtsi
@@ -7,6 +7,10 @@ 
 #include <dt-bindings/input/input.h>
 
 / {
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
@@ -69,11 +73,38 @@ 
 		gpmc,device-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		/* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
+
+		x-loader@0 {
+			label = "x-loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "u-boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "u-boot-env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "fs";
+			reg = <0x680000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
 	};
 };
 
 &i2c1 {
-	clock-frequency = <400000>;
+	clock-frequency = <2600000>;
 
 	twl: twl@48 {
 		reg = <0x48>;
@@ -94,7 +125,7 @@ 
 &i2c3 {
 	clock-frequency = <400000>;
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "atmel,24c64";
 		readonly;
 		reg = <0x50>;
 	};