| Message ID | 1503469622-39462-1-git-send-email-hjc@rock-chips.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 2017年08月23日 14:26, Sandy Huang wrote: > This patch add Document for Rockchip Soc RK3288 LVDS, > This based on the patches from Mark yao and Heiko Stuebner. > > Signed-off-by: Sandy Huang <hjc@rock-chips.com> > Signed-off-by: Mark yao <mark.yao@rock-chips.com> > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- Looks good for me: Reviewed-by: Mark Yao <mark.yao@rock-chips.com> > Changes according to Rob Herring's review. > > .../bindings/display/rockchip/rockchip-lvds.txt | 99 ++++++++++++++++++++++ > 1 file changed, 99 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt > > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt > new file mode 100644 > index 0000000..da6939e > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt > @@ -0,0 +1,99 @@ > +Rockchip RK3288 LVDS interface > +================================ > + > +Required properties: > +- compatible: matching the soc type, one of > + - "rockchip,rk3288-lvds"; > + > +- reg: physical base address of the controller and length > + of memory mapped region. > +- clocks: must include clock specifiers corresponding to entries in the > + clock-names property. > +- clock-names: must contain "pclk_lvds" > + > +- avdd1v0-supply: regulator phandle for 1.0V analog power > +- avdd1v8-supply: regulator phandle for 1.8V analog power > +- avdd3v3-supply: regulator phandle for 3.3V analog power > + > +- rockchip,grf: phandle to the general register files syscon > +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface > + > +Optional properties: > +- pinctrl-names: must contain a "lcdc" entry. > +- pinctrl-0: pin control group to be used for this controller. > + > +Required nodes: > + > +The lvds has two video ports as described by > + Documentation/devicetree/bindings/media/video-interfaces.txt > +Their connections are modeled using the OF graph bindings specified in > + Documentation/devicetree/bindings/graph.txt. > + > +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl > +- video port 1 for either a panel or subsequent encoder > + > +the lvds panel described by > + Documentation/devicetree/bindings/display/panel/simple-panel.txt > + > +Panel required properties: > +- ports for remote LVDS output > + > +Panel optional properties: > +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18". > +This describes decribed by: > + Documentation/devicetree/bindings/display/panel/panel-lvds.txt > + > +Example: > + > +lvds_panel: lvds-panel { > + compatible = "auo,b101ean01"; > + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; > + data-mapping = "jeida-24"; > + > + ports { > + panel_in_lvds: endpoint { > + remote-endpoint = <&lvds_out_panel>; > + }; > + }; > +}; > + > +For Rockchip RK3288: > + > + lvds: lvds@ff96c000 { > + compatible = "rockchip,rk3288-lvds"; > + rockchip,grf = <&grf>; > + reg = <0xff96c000 0x4000>; > + clocks = <&cru PCLK_LVDS_PHY>; > + clock-names = "pclk_lvds"; > + pinctrl-names = "lcdc"; > + pinctrl-0 = <&lcdc_ctl>; > + avdd1v0-supply = <&vdd10_lcd>; > + avdd1v8-supply = <&vcc18_lcd>; > + avdd3v3-supply = <&vcca_33>; > + rockchip,output = "rgb"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + lvds_in: port@0 { > + reg = <0>; > + > + lvds_in_vopb: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&vopb_out_lvds>; > + }; > + lvds_in_vopl: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&vopl_out_lvds>; > + }; > + }; > + > + lvds_out: port@1 { > + reg = <1>; > + > + lvds_out_panel: endpoint { > + remote-endpoint = <&panel_in_lvds>; > + }; > + }; > + }; > + };
Am Dienstag, 29. August 2017, 18:17:11 CEST schrieb Mark yao: > On 2017年08月23日 14:26, Sandy Huang wrote: > > This patch add Document for Rockchip Soc RK3288 LVDS, > > This based on the patches from Mark yao and Heiko Stuebner. > > > > Signed-off-by: Sandy Huang <hjc@rock-chips.com> > > Signed-off-by: Mark yao <mark.yao@rock-chips.com> > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > > --- > Looks good for me: > > Reviewed-by: Mark Yao <mark.yao@rock-chips.com> Signed-off ordering is wrong though ... you add a Signed-off below all others and you could also drop the one from me, as I don't think I did provide to much value between Mark's and Sandy's variant of the patches :-) Heiko > > Changes according to Rob Herring's review. > > > > .../bindings/display/rockchip/rockchip-lvds.txt | 99 ++++++++++++++++++++++ > > 1 file changed, 99 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt > > > > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt > > new file mode 100644 > > index 0000000..da6939e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt > > @@ -0,0 +1,99 @@ > > +Rockchip RK3288 LVDS interface > > +================================ > > + > > +Required properties: > > +- compatible: matching the soc type, one of > > + - "rockchip,rk3288-lvds"; > > + > > +- reg: physical base address of the controller and length > > + of memory mapped region. > > +- clocks: must include clock specifiers corresponding to entries in the > > + clock-names property. > > +- clock-names: must contain "pclk_lvds" > > + > > +- avdd1v0-supply: regulator phandle for 1.0V analog power > > +- avdd1v8-supply: regulator phandle for 1.8V analog power > > +- avdd3v3-supply: regulator phandle for 3.3V analog power > > + > > +- rockchip,grf: phandle to the general register files syscon > > +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface > > + > > +Optional properties: > > +- pinctrl-names: must contain a "lcdc" entry. > > +- pinctrl-0: pin control group to be used for this controller. > > + > > +Required nodes: > > + > > +The lvds has two video ports as described by > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > +Their connections are modeled using the OF graph bindings specified in > > + Documentation/devicetree/bindings/graph.txt. > > + > > +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl > > +- video port 1 for either a panel or subsequent encoder > > + > > +the lvds panel described by > > + Documentation/devicetree/bindings/display/panel/simple-panel.txt > > + > > +Panel required properties: > > +- ports for remote LVDS output > > + > > +Panel optional properties: > > +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18". > > +This describes decribed by: > > + Documentation/devicetree/bindings/display/panel/panel-lvds.txt > > + > > +Example: > > + > > +lvds_panel: lvds-panel { > > + compatible = "auo,b101ean01"; > > + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; > > + data-mapping = "jeida-24"; > > + > > + ports { > > + panel_in_lvds: endpoint { > > + remote-endpoint = <&lvds_out_panel>; > > + }; > > + }; > > +}; > > + > > +For Rockchip RK3288: > > + > > + lvds: lvds@ff96c000 { > > + compatible = "rockchip,rk3288-lvds"; > > + rockchip,grf = <&grf>; > > + reg = <0xff96c000 0x4000>; > > + clocks = <&cru PCLK_LVDS_PHY>; > > + clock-names = "pclk_lvds"; > > + pinctrl-names = "lcdc"; > > + pinctrl-0 = <&lcdc_ctl>; > > + avdd1v0-supply = <&vdd10_lcd>; > > + avdd1v8-supply = <&vcc18_lcd>; > > + avdd3v3-supply = <&vcca_33>; > > + rockchip,output = "rgb"; > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + lvds_in: port@0 { > > + reg = <0>; > > + > > + lvds_in_vopb: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&vopb_out_lvds>; > > + }; > > + lvds_in_vopl: endpoint@1 { > > + reg = <1>; > > + remote-endpoint = <&vopl_out_lvds>; > > + }; > > + }; > > + > > + lvds_out: port@1 { > > + reg = <1>; > > + > > + lvds_out_panel: endpoint { > > + remote-endpoint = <&panel_in_lvds>; > > + }; > > + }; > > + }; > > + }; > > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 23, 2017 at 02:26:59PM +0800, Sandy Huang wrote: > This patch add Document for Rockchip Soc RK3288 LVDS, > This based on the patches from Mark yao and Heiko Stuebner. > > Signed-off-by: Sandy Huang <hjc@rock-chips.com> > Signed-off-by: Mark yao <mark.yao@rock-chips.com> > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- > > Changes according to Rob Herring's review. > > .../bindings/display/rockchip/rockchip-lvds.txt | 99 ++++++++++++++++++++++ > 1 file changed, 99 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt Reviewed-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi heiko, 在 2017/8/29 18:29, Heiko Stuebner 写道: > Am Dienstag, 29. August 2017, 18:17:11 CEST schrieb Mark yao: >> On 2017年08月23日 14:26, Sandy Huang wrote: >>> This patch add Document for Rockchip Soc RK3288 LVDS, >>> This based on the patches from Mark yao and Heiko Stuebner. >>> >>> Signed-off-by: Sandy Huang <hjc@rock-chips.com> >>> Signed-off-by: Mark yao <mark.yao@rock-chips.com> >>> Signed-off-by: Heiko Stuebner <heiko@sntech.de> >>> --- >> Looks good for me: >> >> Reviewed-by: Mark Yao <mark.yao@rock-chips.com> > > Signed-off ordering is wrong though ... you add a Signed-off below > all others and you could also drop the one from me, as I don't > think I did provide to much value between Mark's and Sandy's variant > of the patches :-) > > > Heiko > > I will change the Singed off order as bellow at next version. Signed-off-by: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sandy Huang <hjc@rock-chips.com> >>> Changes according to Rob Herring's review. >>> >>> .../bindings/display/rockchip/rockchip-lvds.txt | 99 ++++++++++++++++++++++ >>> 1 file changed, 99 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt >>> >>> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt >>> new file mode 100644 >>> index 0000000..da6939e >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt >>> @@ -0,0 +1,99 @@ >>> +Rockchip RK3288 LVDS interface >>> +================================ >>> + >>> +Required properties: >>> +- compatible: matching the soc type, one of >>> + - "rockchip,rk3288-lvds"; >>> + >>> +- reg: physical base address of the controller and length >>> + of memory mapped region. >>> +- clocks: must include clock specifiers corresponding to entries in the >>> + clock-names property. >>> +- clock-names: must contain "pclk_lvds" >>> + >>> +- avdd1v0-supply: regulator phandle for 1.0V analog power >>> +- avdd1v8-supply: regulator phandle for 1.8V analog power >>> +- avdd3v3-supply: regulator phandle for 3.3V analog power >>> + >>> +- rockchip,grf: phandle to the general register files syscon >>> +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface >>> + >>> +Optional properties: >>> +- pinctrl-names: must contain a "lcdc" entry. >>> +- pinctrl-0: pin control group to be used for this controller. >>> + >>> +Required nodes: >>> + >>> +The lvds has two video ports as described by >>> + Documentation/devicetree/bindings/media/video-interfaces.txt >>> +Their connections are modeled using the OF graph bindings specified in >>> + Documentation/devicetree/bindings/graph.txt. >>> + >>> +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl >>> +- video port 1 for either a panel or subsequent encoder >>> + >>> +the lvds panel described by >>> + Documentation/devicetree/bindings/display/panel/simple-panel.txt >>> + >>> +Panel required properties: >>> +- ports for remote LVDS output >>> + >>> +Panel optional properties: >>> +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18". >>> +This describes decribed by: >>> + Documentation/devicetree/bindings/display/panel/panel-lvds.txt >>> + >>> +Example: >>> + >>> +lvds_panel: lvds-panel { >>> + compatible = "auo,b101ean01"; >>> + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; >>> + data-mapping = "jeida-24"; >>> + >>> + ports { >>> + panel_in_lvds: endpoint { >>> + remote-endpoint = <&lvds_out_panel>; >>> + }; >>> + }; >>> +}; >>> + >>> +For Rockchip RK3288: >>> + >>> + lvds: lvds@ff96c000 { >>> + compatible = "rockchip,rk3288-lvds"; >>> + rockchip,grf = <&grf>; >>> + reg = <0xff96c000 0x4000>; >>> + clocks = <&cru PCLK_LVDS_PHY>; >>> + clock-names = "pclk_lvds"; >>> + pinctrl-names = "lcdc"; >>> + pinctrl-0 = <&lcdc_ctl>; >>> + avdd1v0-supply = <&vdd10_lcd>; >>> + avdd1v8-supply = <&vcc18_lcd>; >>> + avdd3v3-supply = <&vcca_33>; >>> + rockchip,output = "rgb"; >>> + ports { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + lvds_in: port@0 { >>> + reg = <0>; >>> + >>> + lvds_in_vopb: endpoint@0 { >>> + reg = <0>; >>> + remote-endpoint = <&vopb_out_lvds>; >>> + }; >>> + lvds_in_vopl: endpoint@1 { >>> + reg = <1>; >>> + remote-endpoint = <&vopl_out_lvds>; >>> + }; >>> + }; >>> + >>> + lvds_out: port@1 { >>> + reg = <1>; >>> + >>> + lvds_out_panel: endpoint { >>> + remote-endpoint = <&panel_in_lvds>; >>> + }; >>> + }; >>> + }; >>> + }; >> >> >> > > > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt new file mode 100644 index 0000000..da6939e --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -0,0 +1,99 @@ +Rockchip RK3288 LVDS interface +================================ + +Required properties: +- compatible: matching the soc type, one of + - "rockchip,rk3288-lvds"; + +- reg: physical base address of the controller and length + of memory mapped region. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: must contain "pclk_lvds" + +- avdd1v0-supply: regulator phandle for 1.0V analog power +- avdd1v8-supply: regulator phandle for 1.8V analog power +- avdd3v3-supply: regulator phandle for 3.3V analog power + +- rockchip,grf: phandle to the general register files syscon +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface + +Optional properties: +- pinctrl-names: must contain a "lcdc" entry. +- pinctrl-0: pin control group to be used for this controller. + +Required nodes: + +The lvds has two video ports as described by + Documentation/devicetree/bindings/media/video-interfaces.txt +Their connections are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +the lvds panel described by + Documentation/devicetree/bindings/display/panel/simple-panel.txt + +Panel required properties: +- ports for remote LVDS output + +Panel optional properties: +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18". +This describes decribed by: + Documentation/devicetree/bindings/display/panel/panel-lvds.txt + +Example: + +lvds_panel: lvds-panel { + compatible = "auo,b101ean01"; + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; + data-mapping = "jeida-24"; + + ports { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; +}; + +For Rockchip RK3288: + + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + rockchip,grf = <&grf>; + reg = <0xff96c000 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + avdd1v0-supply = <&vdd10_lcd>; + avdd1v8-supply = <&vcc18_lcd>; + avdd3v3-supply = <&vcca_33>; + rockchip,output = "rgb"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + + lvds_out: port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + };