| Message ID | 20170820151350.2417-2-marek.vasut+renesas@gmail.com |
|---|---|
| State | Accepted |
| Commit | 46933dfbe1774d89b7ab2040c09445d63e2232c6 |
| Delegated to: | Nobuhiro Iwamatsu |
| Headers | show |
Hi, 2017-08-21 0:13 GMT+09:00 Marek Vasut <marek.vasut@gmail.com>: > We need the clock available very early, add the u-boot,dm-pre-reloc > DT property on those nodes, so they come up very in the process. > > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> > Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> > --- > arch/arm/dts/r8a7795.dtsi | 4 ++++ > arch/arm/dts/r8a7796.dtsi | 4 ++++ > 2 files changed, 8 insertions(+) Applied, thanks. Best regards, Nobuhiro > > diff --git a/arch/arm/dts/r8a7795.dtsi b/arch/arm/dts/r8a7795.dtsi > index e99d6443b3..110d0681c8 100644 > --- a/arch/arm/dts/r8a7795.dtsi > +++ b/arch/arm/dts/r8a7795.dtsi > @@ -129,6 +129,7 @@ > #clock-cells = <0>; > /* This value must be overridden by the board */ > clock-frequency = <0>; > + u-boot,dm-pre-reloc; > }; > > extalr_clk: extalr { > @@ -136,6 +137,7 @@ > #clock-cells = <0>; > /* This value must be overridden by the board */ > clock-frequency = <0>; > + u-boot,dm-pre-reloc; > }; > > /* > @@ -189,6 +191,7 @@ > #address-cells = <2>; > #size-cells = <2>; > ranges; > + u-boot,dm-pre-reloc; > > gic: interrupt-controller@f1010000 { > compatible = "arm,gic-400"; > @@ -380,6 +383,7 @@ > #clock-cells = <2>; > #power-domain-cells = <0>; > #reset-cells = <1>; > + u-boot,dm-pre-reloc; > }; > > rst: reset-controller@e6160000 { > diff --git a/arch/arm/dts/r8a7796.dtsi b/arch/arm/dts/r8a7796.dtsi > index 2ec1ed5f49..298df5db9f 100644 > --- a/arch/arm/dts/r8a7796.dtsi > +++ b/arch/arm/dts/r8a7796.dtsi > @@ -111,6 +111,7 @@ > #clock-cells = <0>; > /* This value must be overridden by the board */ > clock-frequency = <0>; > + u-boot,dm-pre-reloc; > }; > > extalr_clk: extalr { > @@ -118,6 +119,7 @@ > #clock-cells = <0>; > /* This value must be overridden by the board */ > clock-frequency = <0>; > + u-boot,dm-pre-reloc; > }; > > /* External CAN clock - to be overridden by boards that provide it */ > @@ -140,6 +142,7 @@ > #address-cells = <2>; > #size-cells = <2>; > ranges; > + u-boot,dm-pre-reloc; > > gic: interrupt-controller@f1010000 { > compatible = "arm,gic-400"; > @@ -333,6 +336,7 @@ > #clock-cells = <2>; > #power-domain-cells = <0>; > #reset-cells = <1>; > + u-boot,dm-pre-reloc; > }; > > rst: reset-controller@e6160000 { > -- > 2.11.0 >
diff --git a/arch/arm/dts/r8a7795.dtsi b/arch/arm/dts/r8a7795.dtsi index e99d6443b3..110d0681c8 100644 --- a/arch/arm/dts/r8a7795.dtsi +++ b/arch/arm/dts/r8a7795.dtsi @@ -129,6 +129,7 @@ #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; + u-boot,dm-pre-reloc; }; extalr_clk: extalr { @@ -136,6 +137,7 @@ #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; + u-boot,dm-pre-reloc; }; /* @@ -189,6 +191,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + u-boot,dm-pre-reloc; gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; @@ -380,6 +383,7 @@ #clock-cells = <2>; #power-domain-cells = <0>; #reset-cells = <1>; + u-boot,dm-pre-reloc; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/dts/r8a7796.dtsi b/arch/arm/dts/r8a7796.dtsi index 2ec1ed5f49..298df5db9f 100644 --- a/arch/arm/dts/r8a7796.dtsi +++ b/arch/arm/dts/r8a7796.dtsi @@ -111,6 +111,7 @@ #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; + u-boot,dm-pre-reloc; }; extalr_clk: extalr { @@ -118,6 +119,7 @@ #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; + u-boot,dm-pre-reloc; }; /* External CAN clock - to be overridden by boards that provide it */ @@ -140,6 +142,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + u-boot,dm-pre-reloc; gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; @@ -333,6 +336,7 @@ #clock-cells = <2>; #power-domain-cells = <0>; #reset-cells = <1>; + u-boot,dm-pre-reloc; }; rst: reset-controller@e6160000 {
We need the clock available very early, add the u-boot,dm-pre-reloc DT property on those nodes, so they come up very in the process. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- arch/arm/dts/r8a7795.dtsi | 4 ++++ arch/arm/dts/r8a7796.dtsi | 4 ++++ 2 files changed, 8 insertions(+)