| Message ID | 1503032826-23680-3-git-send-email-kever.yang@rock-chips.com |
|---|---|
| State | Superseded |
| Delegated to: | Philipp Tomsich |
| Headers | show |
> From: Kever Yang <kever.yang@rock-chips.com> > Date: Fri, 18 Aug 2017 13:07:06 +0800 > > Since we support ATF in SPL and add script for it, let's make the > document up to date. > > Signed-off-by: Kever Yang <kever.yang@rock-chips.com> > --- > > board/rockchip/evb_rk3399/README | 79 ++++++++++++++++++++++++++++++++-------- > 1 file changed, 63 insertions(+), 16 deletions(-) > > diff --git a/board/rockchip/evb_rk3399/README b/board/rockchip/evb_rk3399/README > index fb8bb19..9982848 100644 > --- a/board/rockchip/evb_rk3399/README > +++ b/board/rockchip/evb_rk3399/README > @@ -18,8 +18,8 @@ evb key features: > * PMIC: rk808 > * debug console: UART2 > > -In order to support Arm Trust Firmware(ATF), we need to use the > -miniloader from rockchip which: > +In order to support Arm Trust Firmware(ATF), we can use either SPL or > +miniloader from rockchip to do: > * do DRAM init > * load and verify ATF image > * load and verify U-Boot image > @@ -32,8 +32,8 @@ Get the Source and prebuild binary > > mkdir ~/evb_rk3399 > > cd ~/evb_rk3399 > > git clone https://github.com/ARM-software/arm-trusted-firmware.git > - > git clone https://github.com/rockchip-linux/rkbin > - > git clone https://github.com/rockchip-linux/rkflashtool > + > git clone https://github.com/rockchip-linux/rkbin.git > + > git clone https://github.com/rockchip-linux/rkdeveloptool.git > > Compile the ATF > =============== > @@ -42,32 +42,79 @@ Compile the ATF > > make realclean > > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 > > + Or you can get the bl31.elf directly from Rockchip: > + cp rkbin/rk33/rk3399_bl31_v1.00.elf ../u-boot/bl31.elf > + > + Get bl31.elf in this step, copy it to U-Boot root dir: > + > cp bl31.elf ../u-boot/ > + > Compile the U-Boot > ================== > > > cd ../u-boot > - > make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3399_defconfig all > + > export ARCH=arm64 > + > export CROSS_COMPILE=aarch64-linux-gnu- > + > make evb-rk3399_defconfig > + for firefly-rk3399, use below instead: > + > make evb-firefly_defconfig That should be firefly-rk3399_defconfig > + > make > + > make u-boot.itb > > -Compile the rkflashtool > -======================= > + Get spl/u-boot-spl.bin and u-boot.itb in this step. > > +Compile the rkdeveloptool > +======================= > + Follow instructions in latest README > > cd ../rkflashtool > + > autoreconf -i > + > ./configure > > make > + > sudo make install > + > + Get rkdeveloptool in you Host in this step. > + > +Both origin binaries and Tool are ready now, choose either option 1 or > +option 2 to deploy U-Boot. > + > +Package the image > +================= > > -Package the image for miniloader > -================================ > +Package the image for U-Boot SPL(option 1) > +-------------------------------- > > cd .. > - > cp arm-trusted-firmware/build/rk3399/release/bl31.bin rkbin/rk33 > + > tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin idbspl.img > + > + Get idbspl.img in this step. > + > +Package the image for Rockchip miniloader(option 2) > +------------------------------------------ > + > cd .. > + > cp arm-trusted-firmware/build/rk3399/release/bl31.elf rkbin/rk33 > > ./rkbin/tools/trust_merger rkbin/tools/RK3399TRUST.ini > > ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img > - > mkdir image > - > mv trust.img ./image/ > - > mv uboot.img ./image/rk3399evb-uboot.bin > > -Flash the image > -=============== > + Get trust.img and uboot.img in this step. > + > +Flash the image to eMMC > +======================= > + > +Flash the image with U-Boot SPL(option 1) > +------------------------------- > Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: > + > rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin > + > rkdeveloptool wl 64 u-boot/idbspl.img > + > rkdeveloptool wl 512 u-boot/u-boot.itb > + > rkdeveloptool rd > > - > ./rkflashtool/rkflashloader rk3399evb > +Flash the image with Rockchip miniloader(option 2) > +---------------------------------------- > +Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: > + > rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin > + > rkdeveloptool ul rkbin/rk33/rk3399_loader_v1.08.106.bin > + > rkdeveloptool wl 0x4000 u-boot/uboot.img > + > rkdeveloptool wl 0x6000 u-boot/trust.img > + > rkdeveloptool rd > > You should be able to get U-Boot log message in console/UART2 now. > +For more detail, please reference to: > +http://opensource.rock-chips.com/wiki_Boot_option > -- > 1.9.1 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot > >
> Since we support ATF in SPL and add script for it, let's make the > document up to date. > > Signed-off-by: Kever Yang <kever.yang@rock-chips.com> > --- > > board/rockchip/evb_rk3399/README | 79 ++++++++++++++++++++++++++++++++-------- > 1 file changed, 63 insertions(+), 16 deletions(-) > Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
diff --git a/board/rockchip/evb_rk3399/README b/board/rockchip/evb_rk3399/README index fb8bb19..9982848 100644 --- a/board/rockchip/evb_rk3399/README +++ b/board/rockchip/evb_rk3399/README @@ -18,8 +18,8 @@ evb key features: * PMIC: rk808 * debug console: UART2 -In order to support Arm Trust Firmware(ATF), we need to use the -miniloader from rockchip which: +In order to support Arm Trust Firmware(ATF), we can use either SPL or +miniloader from rockchip to do: * do DRAM init * load and verify ATF image * load and verify U-Boot image @@ -32,8 +32,8 @@ Get the Source and prebuild binary > mkdir ~/evb_rk3399 > cd ~/evb_rk3399 > git clone https://github.com/ARM-software/arm-trusted-firmware.git - > git clone https://github.com/rockchip-linux/rkbin - > git clone https://github.com/rockchip-linux/rkflashtool + > git clone https://github.com/rockchip-linux/rkbin.git + > git clone https://github.com/rockchip-linux/rkdeveloptool.git Compile the ATF =============== @@ -42,32 +42,79 @@ Compile the ATF > make realclean > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 + Or you can get the bl31.elf directly from Rockchip: + cp rkbin/rk33/rk3399_bl31_v1.00.elf ../u-boot/bl31.elf + + Get bl31.elf in this step, copy it to U-Boot root dir: + > cp bl31.elf ../u-boot/ + Compile the U-Boot ================== > cd ../u-boot - > make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3399_defconfig all + > export ARCH=arm64 + > export CROSS_COMPILE=aarch64-linux-gnu- + > make evb-rk3399_defconfig + for firefly-rk3399, use below instead: + > make evb-firefly_defconfig + > make + > make u-boot.itb -Compile the rkflashtool -======================= + Get spl/u-boot-spl.bin and u-boot.itb in this step. +Compile the rkdeveloptool +======================= + Follow instructions in latest README > cd ../rkflashtool + > autoreconf -i + > ./configure > make + > sudo make install + + Get rkdeveloptool in you Host in this step. + +Both origin binaries and Tool are ready now, choose either option 1 or +option 2 to deploy U-Boot. + +Package the image +================= -Package the image for miniloader -================================ +Package the image for U-Boot SPL(option 1) +-------------------------------- > cd .. - > cp arm-trusted-firmware/build/rk3399/release/bl31.bin rkbin/rk33 + > tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin idbspl.img + + Get idbspl.img in this step. + +Package the image for Rockchip miniloader(option 2) +------------------------------------------ + > cd .. + > cp arm-trusted-firmware/build/rk3399/release/bl31.elf rkbin/rk33 > ./rkbin/tools/trust_merger rkbin/tools/RK3399TRUST.ini > ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img - > mkdir image - > mv trust.img ./image/ - > mv uboot.img ./image/rk3399evb-uboot.bin -Flash the image -=============== + Get trust.img and uboot.img in this step. + +Flash the image to eMMC +======================= + +Flash the image with U-Boot SPL(option 1) +------------------------------- Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: + > rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin + > rkdeveloptool wl 64 u-boot/idbspl.img + > rkdeveloptool wl 512 u-boot/u-boot.itb + > rkdeveloptool rd - > ./rkflashtool/rkflashloader rk3399evb +Flash the image with Rockchip miniloader(option 2) +---------------------------------------- +Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: + > rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin + > rkdeveloptool ul rkbin/rk33/rk3399_loader_v1.08.106.bin + > rkdeveloptool wl 0x4000 u-boot/uboot.img + > rkdeveloptool wl 0x6000 u-boot/trust.img + > rkdeveloptool rd You should be able to get U-Boot log message in console/UART2 now. +For more detail, please reference to: +http://opensource.rock-chips.com/wiki_Boot_option
Since we support ATF in SPL and add script for it, let's make the document up to date. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> --- board/rockchip/evb_rk3399/README | 79 ++++++++++++++++++++++++++++++++-------- 1 file changed, 63 insertions(+), 16 deletions(-)