diff mbox

[v2,1/2] arm64: dts: rockchip: add usb3 controller node for RK3328 SoCs

Message ID 1502956490-23087-2-git-send-email-william.wu@rock-chips.com
State Changes Requested, archived
Headers show

Commit Message

William Wu Aug. 17, 2017, 7:54 a.m. UTC
RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.

Signed-off-by: William Wu <william.wu@rock-chips.com>
---
Changes in v2:
- Modify the dwc3 quirk "snps,tx-ipgap-linecheck-dis-quirk" to
  "snps,dis-tx-ipgap-linecheck-quirk"

 .../devicetree/bindings/usb/rockchip,dwc3.txt      |  4 +++-
 arch/arm64/boot/dts/rockchip/rk3328.dtsi           | 27 ++++++++++++++++++++++
 2 files changed, 30 insertions(+), 1 deletion(-)

Comments

Heiko Stübner Aug. 18, 2017, 9:24 a.m. UTC | #1
Hi William,

Am Donnerstag, 17. August 2017, 15:54:49 CEST schrieb William Wu:
> RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
> core's general architecture. It can act as static xHCI host
> controller, static device controller, USB 3.0/2.0 OTG basing
> on ID of USB3.0 PHY.
> 
> Signed-off-by: William Wu <william.wu@rock-chips.com>
> ---
> Changes in v2:
> - Modify the dwc3 quirk "snps,tx-ipgap-linecheck-dis-quirk" to
>   "snps,dis-tx-ipgap-linecheck-quirk"
> 
>  .../devicetree/bindings/usb/rockchip,dwc3.txt      |  4 +++-
>  arch/arm64/boot/dts/rockchip/rk3328.dtsi           | 27 ++++++++++++++++++++++
>  2 files changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> index 0536a93..d6b2e47 100644
> --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> @@ -1,7 +1,9 @@
>  Rockchip SuperSpeed DWC3 USB SoC controller
>  
>  Required properties:
> -- compatible:	should contain "rockchip,rk3399-dwc3" for rk3399 SoC
> +- compatible:	should be one of the following:
> +  - "rockchip,rk3399-dwc3": for rk3399 SoC
> +  - "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3": for rk3328 SoC
>  - clocks:	A list of phandle + clock-specifier pairs for the
>  		clocks listed in clock-names
>  - clock-names:	Should contain the following:

This probably shouldn't be part of the patch adding the dts node, but
instead should be a separate patch and should either go through some
usb tree or at least get an Ack from usb maintainers (Felipe Balbi and/or
Greg Kroah Hartman), so you should definitly include them into your
recipient list.


Heiko

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
wlf Aug. 21, 2017, 11:35 a.m. UTC | #2
Dear Heiko,

在 2017年08月18日 17:24, Heiko Stuebner 写道:
> Hi William,
>
> Am Donnerstag, 17. August 2017, 15:54:49 CEST schrieb William Wu:
>> RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
>> core's general architecture. It can act as static xHCI host
>> controller, static device controller, USB 3.0/2.0 OTG basing
>> on ID of USB3.0 PHY.
>>
>> Signed-off-by: William Wu <william.wu@rock-chips.com>
>> ---
>> Changes in v2:
>> - Modify the dwc3 quirk "snps,tx-ipgap-linecheck-dis-quirk" to
>>    "snps,dis-tx-ipgap-linecheck-quirk"
>>
>>   .../devicetree/bindings/usb/rockchip,dwc3.txt      |  4 +++-
>>   arch/arm64/boot/dts/rockchip/rk3328.dtsi           | 27 ++++++++++++++++++++++
>>   2 files changed, 30 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>> index 0536a93..d6b2e47 100644
>> --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>> @@ -1,7 +1,9 @@
>>   Rockchip SuperSpeed DWC3 USB SoC controller
>>   
>>   Required properties:
>> -- compatible:	should contain "rockchip,rk3399-dwc3" for rk3399 SoC
>> +- compatible:	should be one of the following:
>> +  - "rockchip,rk3399-dwc3": for rk3399 SoC
>> +  - "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3": for rk3328 SoC
>>   - clocks:	A list of phandle + clock-specifier pairs for the
>>   		clocks listed in clock-names
>>   - clock-names:	Should contain the following:
> This probably shouldn't be part of the patch adding the dts node, but
> instead should be a separate patch and should either go through some
> usb tree or at least get an Ack from usb maintainers (Felipe Balbi and/or
> Greg Kroah Hartman), so you should definitly include them into your
> recipient list.
Thanks for your  suggestion. I will submit two patches separately, and 
add usb maintainers in
the recipient list.
>
>
> Heiko
>
>
>
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 0536a93..d6b2e47 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -1,7 +1,9 @@ 
 Rockchip SuperSpeed DWC3 USB SoC controller
 
 Required properties:
-- compatible:	should contain "rockchip,rk3399-dwc3" for rk3399 SoC
+- compatible:	should be one of the following:
+  - "rockchip,rk3399-dwc3": for rk3399 SoC
+  - "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3": for rk3328 SoC
 - clocks:	A list of phandle + clock-specifier pairs for the
 		clocks listed in clock-names
 - clock-names:	Should contain the following:
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index e6da0ce..14bd8f4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -655,6 +655,33 @@ 
 		status = "disabled";
 	};
 
+	usbdrd3: usb@ff600000 {
+		compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
+		clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+			 <&cru ACLK_USB3OTG>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usbdrd_dwc3: dwc3@ff600000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xff600000 0x0 0x100000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			status = "disabled";
+		};
+	};
+
 	gic: interrupt-controller@ff811000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;