[1/4] drm/tve200: Add DT bindings

Submitted by Linus Walleij on Aug. 13, 2017, 3:11 p.m.

Details

Message ID 20170813151132.24736-2-linus.walleij@linaro.org
State Not Applicable
Headers show

Commit Message

Linus Walleij Aug. 13, 2017, 3:11 p.m.
This adds device tree bindings for the Faraday TVE200 IP block.
This IP block is present in the Gemini ARM SoC and also in some
Grain Media GMxxxx SoCs.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 .../devicetree/bindings/display/faraday,tve200.txt | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.txt

Comments

Rob Herring Aug. 17, 2017, 8:46 p.m.
On Sun, Aug 13, 2017 at 05:11:29PM +0200, Linus Walleij wrote:
> This adds device tree bindings for the Faraday TVE200 IP block.
> This IP block is present in the Gemini ARM SoC and also in some
> Grain Media GMxxxx SoCs.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  .../devicetree/bindings/display/faraday,tve200.txt | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
> new file mode 100644
> index 000000000000..95d588fbb2f2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt
> @@ -0,0 +1,41 @@
> +* Faraday TV Encoder TVE200
> +
> +Required properties:
> +
> +- compatible: must be one of:
> +	"faraday,tve200"
> +	"cortina,gemini-tvc", "faraday,tve200"
> +
> +- reg: base address and size of the control registers block
> +
> +- interrupts: contains an interrupt specifier for the interrupt
> +	line from the TVE200
> +
> +- clock-names: should contain "PCLK" for the clock line clocking the
> +	silicon and "TVE" for the 27MHz clock to the video driver
> +
> +- clocks: contains phandle and clock specifier pairs for the entries
> +	in the clock-names property. See
> +	Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Optional properties:
> +
> +- resets: contains the reset line phandle for the block
> +
> +Required sub-nodes:
> +
> +- port: describes LCD panel signals, following the common binding
> +	for video transmitter interfaces; see
> +	Documentation/devicetree/bindings/media/video-interfaces.txt

Need to explicitly list ports and endpoints.

Also, needs to be in the example as it is required.

> +
> +Example:
> +
> +tvc@6a000000 {

display-controller@...

> +	compatible = "faraday,tve200";
> +	reg = <0x6a000000 0x1000>;
> +	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
> +	resets = <&syscon GEMINI_RESET_TVC>;
> +	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
> +		 <&syscon GEMINI_CLK_TVC>;
> +	clock-names = "PCLK", "TVE";
> +};
> -- 
> 2.13.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch hide | download patch | download mbox

diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
new file mode 100644
index 000000000000..95d588fbb2f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt
@@ -0,0 +1,41 @@ 
+* Faraday TV Encoder TVE200
+
+Required properties:
+
+- compatible: must be one of:
+	"faraday,tve200"
+	"cortina,gemini-tvc", "faraday,tve200"
+
+- reg: base address and size of the control registers block
+
+- interrupts: contains an interrupt specifier for the interrupt
+	line from the TVE200
+
+- clock-names: should contain "PCLK" for the clock line clocking the
+	silicon and "TVE" for the 27MHz clock to the video driver
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+
+- resets: contains the reset line phandle for the block
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+	for video transmitter interfaces; see
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+tvc@6a000000 {
+	compatible = "faraday,tve200";
+	reg = <0x6a000000 0x1000>;
+	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+	resets = <&syscon GEMINI_RESET_TVC>;
+	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+		 <&syscon GEMINI_CLK_TVC>;
+	clock-names = "PCLK", "TVE";
+};