Message ID | alpine.DEB.2.20.1708070916300.2061@hadrien |
---|---|
State | Not Applicable |
Headers | show |
Le 07/08/2017 à 09:16, Julia Lawall a écrit : > > On Mon, 7 Aug 2017, Uwe Kleine-König wrote: > >> On Mon, Aug 07, 2017 at 01:49:53AM +0200, Christophe JAILLET wrote: >>> 'devm_pinctrl_get()' never returns NULL, so this test can be simplified. >> That's wrong. If CONFIG_PINCTRL is disabled devm_pinctrl_get returns >> NULL. But I think this shouldn't be considered an error, so your change >> is right, just the commit log is not. >> >>> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c >>> index 54a47b40546f..7e84662fe1c0 100644 >>> --- a/drivers/i2c/busses/i2c-imx.c >>> +++ b/drivers/i2c/busses/i2c-imx.c >>> @@ -997,7 +997,7 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx, >>> struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo; >>> >>> i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev); >>> - if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) { >>> + if (IS_ERR(i2c_imx->pinctrl)) { >>> dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n"); >>> return PTR_ERR(i2c_imx->pinctrl); >>> } >> Side note: I'm not sure, this construct is valid. IIRC PTR_ERR should >> only be called for values x where IS_ERR(x) is true. Here it is at least >> surprising that an message hints to a problem but the return code is 0. >> >> @Julia: I'm sure coccinelle can find more of those?! > I only found a few. Christophe, if you want to fix tem up, please go > ahead. Hi Julia, I've looked quickly at your output, and can't see what could/should be done in the spotted cases. e100.c: a comment says that 'If it's NULL, then no ucode is required', so, the behavior looks ok to me chcr_algo.c: function 'create_wr_fn' is passed as a parameter. I've no way to make sure of its behavior, so the code could be valid. I won't touch it. acl.c: by code inspection, the way the code is written looks valid to me. We have NULL if the a call in 'ocfs2_get_acl_nolock' returns -ENODATA. Not that strange to return success in this case So, personally, I won't propose anything on these files. Up to anyone to dig further than me. CJ > julia > > diff -u -p /var/linuxes/linux-next/drivers/net/ethernet/intel/e100.c > /tmp/nothing/drivers/net/ethernet/intel/e100.c > --- /var/linuxes/linux-next/drivers/net/ethernet/intel/e100.c > +++ /tmp/nothing/drivers/net/ethernet/intel/e100.c > @@ -1370,8 +1370,6 @@ static inline int e100_load_ucode_wait(s > > fw = e100_request_firmware(nic); > /* If it's NULL, then no ucode is required */ > - if (!fw || IS_ERR(fw)) > - return PTR_ERR(fw); > > if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode))) > netif_err(nic, probe, nic->netdev, > diff -u -p /var/linuxes/linux-next/drivers/i2c/busses/i2c-imx.c > /tmp/nothing/drivers/i2c/busses/i2c-imx.c > --- /var/linuxes/linux-next/drivers/i2c/busses/i2c-imx.c > +++ /tmp/nothing/drivers/i2c/busses/i2c-imx.c > @@ -997,9 +997,7 @@ static int i2c_imx_init_recovery_info(st > struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo; > > i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev); > - if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) { > dev_info(&pdev->dev, "can't get pinctrl, bus recovery not > supported\n"); > - return PTR_ERR(i2c_imx->pinctrl); > } > > i2c_imx->pinctrl_pins_default = > pinctrl_lookup_state(i2c_imx->pinctrl, > diff -u -p /var/linuxes/linux-next/drivers/crypto/chelsio/chcr_algo.c > /tmp/nothing/drivers/crypto/chelsio/chcr_algo.c > --- /var/linuxes/linux-next/drivers/crypto/chelsio/chcr_algo.c > +++ /tmp/nothing/drivers/crypto/chelsio/chcr_algo.c > @@ -3159,8 +3159,6 @@ static int chcr_aead_op(struct aead_requ > skb = create_wr_fn(req, u_ctx->lldi.rxq_ids[ctx->rx_qidx], size, > op_type); > > - if (IS_ERR(skb) || !skb) > - return PTR_ERR(skb); > > skb->dev = u_ctx->lldi.ports[0]; > set_wr_txq(skb, CPL_PRIORITY_DATA, ctx->tx_qidx); > diff -u -p /var/linuxes/linux-next/fs/ocfs2/acl.c > /tmp/nothing/fs/ocfs2/acl.c > --- /var/linuxes/linux-next/fs/ocfs2/acl.c > +++ /tmp/nothing/fs/ocfs2/acl.c > @@ -331,8 +331,6 @@ int ocfs2_acl_chmod(struct inode *inode, > return 0; > > acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh); > - if (IS_ERR(acl) || !acl) > - return PTR_ERR(acl); > ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode); > if (ret) > return ret; > > > > > >> Best regards >> Uwe >> >> -- >> Pengutronix e.K. | Uwe Kleine-König | >> Industrial Linux Solutions | http://www.pengutronix.de/ | >> -- >> To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > >
On Tue, 8 Aug 2017, Christophe JAILLET wrote: > Le 07/08/2017 à 09:16, Julia Lawall a écrit : > > > > On Mon, 7 Aug 2017, Uwe Kleine-König wrote: > > > > > On Mon, Aug 07, 2017 at 01:49:53AM +0200, Christophe JAILLET wrote: > > > > 'devm_pinctrl_get()' never returns NULL, so this test can be simplified. > > > That's wrong. If CONFIG_PINCTRL is disabled devm_pinctrl_get returns > > > NULL. But I think this shouldn't be considered an error, so your change > > > is right, just the commit log is not. > > > > > > > diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c > > > > index 54a47b40546f..7e84662fe1c0 100644 > > > > --- a/drivers/i2c/busses/i2c-imx.c > > > > +++ b/drivers/i2c/busses/i2c-imx.c > > > > @@ -997,7 +997,7 @@ static int i2c_imx_init_recovery_info(struct > > > > imx_i2c_struct *i2c_imx, > > > > struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo; > > > > > > > > i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev); > > > > - if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) { > > > > + if (IS_ERR(i2c_imx->pinctrl)) { > > > > dev_info(&pdev->dev, "can't get pinctrl, bus recovery > > > > not supported\n"); > > > > return PTR_ERR(i2c_imx->pinctrl); > > > > } > > > Side note: I'm not sure, this construct is valid. IIRC PTR_ERR should > > > only be called for values x where IS_ERR(x) is true. Here it is at least > > > surprising that an message hints to a problem but the return code is 0. > > > > > > @Julia: I'm sure coccinelle can find more of those?! > > I only found a few. Christophe, if you want to fix tem up, please go > > ahead. > > Hi Julia, > > I've looked quickly at your output, and can't see what could/should be done in > the spotted cases. > e100.c: a comment says that 'If it's NULL, then no ucode is required', so, > the behavior looks ok to me > chcr_algo.c: function 'create_wr_fn' is passed as a parameter. I've no way > to make sure of its behavior, so the code could be valid. I won't touch it. > acl.c: by code inspection, the way the code is written looks valid to me. > We have NULL if the a call in 'ocfs2_get_acl_nolock' returns -ENODATA. Not > that strange to return success in this case > > So, personally, I won't propose anything on these files. Up to anyone to dig > further than me. OK, thanks for looking at them. I do find it odd to exploit PTR_ERR to return a success value. Maybe I will check with the maintainers in the uncommented cases. julia > > CJ > > julia > > > > diff -u -p /var/linuxes/linux-next/drivers/net/ethernet/intel/e100.c > > /tmp/nothing/drivers/net/ethernet/intel/e100.c > > --- /var/linuxes/linux-next/drivers/net/ethernet/intel/e100.c > > +++ /tmp/nothing/drivers/net/ethernet/intel/e100.c > > @@ -1370,8 +1370,6 @@ static inline int e100_load_ucode_wait(s > > > > fw = e100_request_firmware(nic); > > /* If it's NULL, then no ucode is required */ > > - if (!fw || IS_ERR(fw)) > > - return PTR_ERR(fw); > > > > if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode))) > > netif_err(nic, probe, nic->netdev, > > diff -u -p /var/linuxes/linux-next/drivers/i2c/busses/i2c-imx.c > > /tmp/nothing/drivers/i2c/busses/i2c-imx.c > > --- /var/linuxes/linux-next/drivers/i2c/busses/i2c-imx.c > > +++ /tmp/nothing/drivers/i2c/busses/i2c-imx.c > > @@ -997,9 +997,7 @@ static int i2c_imx_init_recovery_info(st > > struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo; > > > > i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev); > > - if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) { > > dev_info(&pdev->dev, "can't get pinctrl, bus recovery not > > supported\n"); > > - return PTR_ERR(i2c_imx->pinctrl); > > } > > > > i2c_imx->pinctrl_pins_default = > > pinctrl_lookup_state(i2c_imx->pinctrl, > > diff -u -p /var/linuxes/linux-next/drivers/crypto/chelsio/chcr_algo.c > > /tmp/nothing/drivers/crypto/chelsio/chcr_algo.c > > --- /var/linuxes/linux-next/drivers/crypto/chelsio/chcr_algo.c > > +++ /tmp/nothing/drivers/crypto/chelsio/chcr_algo.c > > @@ -3159,8 +3159,6 @@ static int chcr_aead_op(struct aead_requ > > skb = create_wr_fn(req, u_ctx->lldi.rxq_ids[ctx->rx_qidx], size, > > op_type); > > > > - if (IS_ERR(skb) || !skb) > > - return PTR_ERR(skb); > > > > skb->dev = u_ctx->lldi.ports[0]; > > set_wr_txq(skb, CPL_PRIORITY_DATA, ctx->tx_qidx); > > diff -u -p /var/linuxes/linux-next/fs/ocfs2/acl.c > > /tmp/nothing/fs/ocfs2/acl.c > > --- /var/linuxes/linux-next/fs/ocfs2/acl.c > > +++ /tmp/nothing/fs/ocfs2/acl.c > > @@ -331,8 +331,6 @@ int ocfs2_acl_chmod(struct inode *inode, > > return 0; > > > > acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh); > > - if (IS_ERR(acl) || !acl) > > - return PTR_ERR(acl); > > ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode); > > if (ret) > > return ret; > > > > > > > > > > > > > Best regards > > > Uwe > > > > > > -- > > > Pengutronix e.K. | Uwe Kleine-König | > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > -- > > > To unsubscribe from this list: send the line "unsubscribe kernel-janitors" > > > in > > > the body of a message to majordomo@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > > >
diff -u -p /var/linuxes/linux-next/drivers/net/ethernet/intel/e100.c /tmp/nothing/drivers/net/ethernet/intel/e100.c --- /var/linuxes/linux-next/drivers/net/ethernet/intel/e100.c +++ /tmp/nothing/drivers/net/ethernet/intel/e100.c @@ -1370,8 +1370,6 @@ static inline int e100_load_ucode_wait(s fw = e100_request_firmware(nic); /* If it's NULL, then no ucode is required */ - if (!fw || IS_ERR(fw)) - return PTR_ERR(fw); if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode))) netif_err(nic, probe, nic->netdev, diff -u -p /var/linuxes/linux-next/drivers/i2c/busses/i2c-imx.c /tmp/nothing/drivers/i2c/busses/i2c-imx.c --- /var/linuxes/linux-next/drivers/i2c/busses/i2c-imx.c +++ /tmp/nothing/drivers/i2c/busses/i2c-imx.c @@ -997,9 +997,7 @@ static int i2c_imx_init_recovery_info(st struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo; i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev); - if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) { dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n"); - return PTR_ERR(i2c_imx->pinctrl); } i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl, diff -u -p /var/linuxes/linux-next/drivers/crypto/chelsio/chcr_algo.c /tmp/nothing/drivers/crypto/chelsio/chcr_algo.c --- /var/linuxes/linux-next/drivers/crypto/chelsio/chcr_algo.c +++ /tmp/nothing/drivers/crypto/chelsio/chcr_algo.c @@ -3159,8 +3159,6 @@ static int chcr_aead_op(struct aead_requ skb = create_wr_fn(req, u_ctx->lldi.rxq_ids[ctx->rx_qidx], size, op_type); - if (IS_ERR(skb) || !skb) - return PTR_ERR(skb); skb->dev = u_ctx->lldi.ports[0]; set_wr_txq(skb, CPL_PRIORITY_DATA, ctx->tx_qidx); diff -u -p /var/linuxes/linux-next/fs/ocfs2/acl.c /tmp/nothing/fs/ocfs2/acl.c --- /var/linuxes/linux-next/fs/ocfs2/acl.c +++ /tmp/nothing/fs/ocfs2/acl.c @@ -331,8 +331,6 @@ int ocfs2_acl_chmod(struct inode *inode, return 0; acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh); - if (IS_ERR(acl) || !acl) - return PTR_ERR(acl); ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode); if (ret) return ret;