[GIT,PULL,2/3] Allwinner dts changes for 4.14

Submitted by Chen-Yu Tsai on Aug. 7, 2017, 3:30 a.m.

Details

Message ID 20170807033051.idjrno7obvet6kqj@wens.csie.org
State New
Headers show

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt-for-4.14

Commit Message

Chen-Yu Tsai Aug. 7, 2017, 3:30 a.m.
The following changes since commit c50f9fb6c535edf4731eecb53d91ebc297e82e5b:

  ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros (2017-07-27 21:18:48 +0800)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt-for-4.14

for you to fetch changes up to 581ae76e96c6ab3bf942da7c4822ce9fa2074a01:

  ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMC (2017-08-05 22:06:58 +0800)

----------------------------------------------------------------
The usual improvement patches:

  - R_INTC interrupt controller compatible string update and device node
    addition

  - Battery charger enabled on the Cubietruck

  - New board: Bananapi M2 Magic

  - Ethernet and USB OTG enabled on the Beelink X2

  - MMC enabled for A83T boards

----------------------------------------------------------------
Alexander Syring (1):
      ARM: dts: sun7i: enable battery power supply subnode on cubietruck

Chen-Yu Tsai (7):
      ARM: dts: sun6i: a31: Use new sun6i-a31-r-intc compatible for NMI/R_INTC
      ARM: dts: sun8i: a23/a33: Use new sun6i-a31-r-intc compatible for NMI/R_INTC
      ARM: dts: sun8i: a83t: Add device node for R_INTC interrupt controller
      ARM: dts: sun8i: a83t: Add MMC controller device nodes
      ARM: dts: sun8i: a83t: Add pingroup for 8-bit eMMC on mmc2
      ARM: dts: sun8i: a83t: cubietruck-plus: Enable micro-SD card and eMMC
      ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMC

Marcus Cooper (2):
      ARM: dts: sun8i: h3: Enable USB OTG on the Beelink X2
      ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2

Maxime Ripard (1):
      ARM: dts: sun8i: Add BananaPI M2-Magic DTS

 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/sun6i-a31.dtsi                   |   6 +-
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts         |   4 +
 arch/arm/boot/dts/sun8i-a23-a33.dtsi               |   6 +-
 .../boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts  |  21 ++
 arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts   |  27 ++
 arch/arm/boot/dts/sun8i-a83t.dtsi                  |  77 +++++
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          |  31 +-
 arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts       | 321 +++++++++++++++++++++
 9 files changed, 486 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts

Comments

Arnd Bergmann Aug. 16, 2017, 9:11 p.m.
On Mon, Aug 7, 2017 at 5:30 AM, Chen-Yu Tsai <wens@csie.org> wrote:
> The following changes since commit c50f9fb6c535edf4731eecb53d91ebc297e82e5b:
>
>   ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros (2017-07-27 21:18:48 +0800)
>
> are available in the git repository at:
>
>   https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt-for-4.14
>
> for you to fetch changes up to 581ae76e96c6ab3bf942da7c4822ce9fa2074a01:
>
>   ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMC (2017-08-05 22:06:58 +0800)
>
> ----------------------------------------------------------------
> The usual improvement patches:
>
>   - R_INTC interrupt controller compatible string update and device node
>     addition
>
>   - Battery charger enabled on the Cubietruck
>
>   - New board: Bananapi M2 Magic
>
>   - Ethernet and USB OTG enabled on the Beelink X2
>
>   - MMC enabled for A83T boards

Pulled into next/dt, thanks!

       Arnd