[LEDE-DEV,04/13] uboot-sunxi: update to version 2017.07

Message ID 20170803213759.8875-5-hauke@hauke-m.de
State Accepted
Delegated to: Hauke Mehrtens
Headers show

Commit Message

Hauke Mehrtens Aug. 3, 2017, 9:37 p.m.
This needs swig and a host dtc install on the host now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 package/boot/uboot-sunxi/Makefile                  |    4 +-
 .../patches/002-add-olimex-a13-som.patch           |    3 +-
 .../patches/003-add-theobroma-a31-pangolin.patch   |   22 +-
 .../patches/010-dt-sync-files-with-kernel.patch    | 1403 ----
 .../011-dt-sync-dts-files-with-kernel.patch        | 7211 --------------------
 .../patches/012-sun6i-fix-clock_twi_onoff.patch    |   38 -
 .../patches/013-enable-realtek-phy.patch           |   24 -
 .../uboot-sunxi/patches/014-fix-gmac-init.patch    |  127 -
 .../patches/015-fix-2nd-usb-ctrler-on-sun47i.patch |   78 -
 .../patches/016-spl-print-mmc-slot.patch           |   31 -
 .../017-usb-add-support-for-usb3-vbus-pin.patch    |   39 -
 .../018-usb-specify-vbus-pins-on-orangepis.patch   |   31 -
 .../019-sid-add-efuse-support-for-h3-a83t.patch    |   33 -
 .../020-boot-display-board-model-on-startup.patch  |   23 -
 .../091-sun6i-sync-PLL1-multdiv-with-Boot1.patch   |    6 +-
 .../patches/093-sun6i-fix-PLL-LDO-voltselect.patch |   15 +-
 .../patches/100-sun6i-alternate-on-UART2.patch     |    4 +-
 .../101-sun6i-support-console-on-UART2.patch       |    8 +-
 .../102-sunxi-make_CONS_INDEX-configurable.patch   |    6 +-
 19 files changed, 29 insertions(+), 9077 deletions(-)
 delete mode 100644 package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch
 delete mode 100644 package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch

Patch

diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile
index bb58104d06..817c47bd20 100644
--- a/package/boot/uboot-sunxi/Makefile
+++ b/package/boot/uboot-sunxi/Makefile
@@ -9,9 +9,9 @@ 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_VERSION:=2016.03
+PKG_VERSION:=2017.07
 
-PKG_HASH:=e49337262ecac44dbdeac140f2c6ebd1eba345e0162b0464172e7f05583ed7bb
+PKG_HASH:=5374bfdc8acb9a38c025371b1ff20f45e7533668e84e685d0df5d9e7c0e4feff
 
 PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
 
diff --git a/package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.patch b/package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.patch
index f29ad12b75..c19f3781d1 100644
--- a/package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.patch
+++ b/package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.patch
@@ -1,8 +1,7 @@ 
 --- /dev/null
 +++ b/configs/OLIMEX_A13_SOM_defconfig
-@@ -0,0 +1,18 @@
+@@ -0,0 +1,17 @@
 +CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 +CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
 +CONFIG_ARM=y
 +CONFIG_ARCH_SUNXI=y
diff --git a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch
index e5a66d7ebe..2fce04828c 100644
--- a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch
+++ b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch
@@ -1,16 +1,16 @@ 
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -152,6 +152,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+@@ -254,6 +254,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
  	sun6i-a31-m9.dtb \
  	sun6i-a31-mele-a1000g-quad.dtb \
  	sun6i-a31-mixtile-loftq.dtb \
 +	sun6i-a31-pangolin.dtb \
+ 	sun6i-a31s-colorfly-e708-q1.dtb \
  	sun6i-a31s-cs908.dtb \
- 	sun6i-a31s-primo81.dtb \
- 	sun6i-a31s-sinovoip-bpi-m2.dtb
+ 	sun6i-a31s-inet-q972.dtb \
 --- a/arch/arm/dts/sun6i-a31.dtsi
 +++ b/arch/arm/dts/sun6i-a31.dtsi
-@@ -643,6 +643,13 @@
+@@ -679,6 +679,13 @@
  				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
  			};
  
@@ -358,17 +358,9 @@ 
 +CONFIG_DM_SPI=y
 +CONFIG_DM_SPI_FLASH=y
 +CONFIG_SUNXI_SPI=y
---- a/board/sunxi/Kconfig
-+++ b/board/sunxi/Kconfig
-@@ -15,7 +15,6 @@ config SUNXI_GEN_SUN6I
- 	separate ahb reset control registers, custom pmic bus, new style
- 	watchdog, etc.
- 
--
- choice
- 	prompt "Sunxi SoC Variant"
- 	optional
-@@ -533,6 +532,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
+--- a/arch/arm/mach-sunxi/Kconfig
++++ b/arch/arm/mach-sunxi/Kconfig
+@@ -746,6 +746,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
  	Set the SCL pin for the LCD i2c interface. This takes a string in the
  	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
  
diff --git a/package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch b/package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch
deleted file mode 100644
index d8fa52c7e5..0000000000
--- a/package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch
+++ /dev/null
@@ -1,1403 +0,0 @@ 
-From 4bb656e9dde2019cb42ac4c27b3a114a801ad127 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 16 Mar 2016 13:41:23 +0100
-Subject: [PATCH] include/dt-bindings: Sync some files with the kernel
-
-This commit syncs the dt-bindings/input/* headers with the kernel (v4.5)
-and adds dt-bindings/clock/sun4i-a10-pll2.h, both are necessary for newer
-sunxi dts files to build.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Reviewed-by: Tom Rini <trini@konsulko.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- include/dt-bindings/clock/sun4i-a10-pll2.h    |  53 ++
- include/dt-bindings/input/input.h             | 510 +---------------
- include/dt-bindings/input/linux-event-codes.h | 805 ++++++++++++++++++++++++++
- 3 files changed, 859 insertions(+), 509 deletions(-)
- create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h
- create mode 100644 include/dt-bindings/input/linux-event-codes.h
-
---- /dev/null
-+++ b/include/dt-bindings/clock/sun4i-a10-pll2.h
-@@ -0,0 +1,53 @@
-+/*
-+ * Copyright 2015 Maxime Ripard
-+ *
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#ifndef __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
-+#define __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
-+
-+#define SUN4I_A10_PLL2_1X	0
-+#define SUN4I_A10_PLL2_2X	1
-+#define SUN4I_A10_PLL2_4X	2
-+#define SUN4I_A10_PLL2_8X	3
-+
-+#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */
---- a/include/dt-bindings/input/input.h
-+++ b/include/dt-bindings/input/input.h
-@@ -9,515 +9,7 @@
- #ifndef _DT_BINDINGS_INPUT_INPUT_H
- #define _DT_BINDINGS_INPUT_INPUT_H
- 
--#define KEY_RESERVED		0
--#define KEY_ESC			1
--#define KEY_1			2
--#define KEY_2			3
--#define KEY_3			4
--#define KEY_4			5
--#define KEY_5			6
--#define KEY_6			7
--#define KEY_7			8
--#define KEY_8			9
--#define KEY_9			10
--#define KEY_0			11
--#define KEY_MINUS		12
--#define KEY_EQUAL		13
--#define KEY_BACKSPACE		14
--#define KEY_TAB			15
--#define KEY_Q			16
--#define KEY_W			17
--#define KEY_E			18
--#define KEY_R			19
--#define KEY_T			20
--#define KEY_Y			21
--#define KEY_U			22
--#define KEY_I			23
--#define KEY_O			24
--#define KEY_P			25
--#define KEY_LEFTBRACE		26
--#define KEY_RIGHTBRACE		27
--#define KEY_ENTER		28
--#define KEY_LEFTCTRL		29
--#define KEY_A			30
--#define KEY_S			31
--#define KEY_D			32
--#define KEY_F			33
--#define KEY_G			34
--#define KEY_H			35
--#define KEY_J			36
--#define KEY_K			37
--#define KEY_L			38
--#define KEY_SEMICOLON		39
--#define KEY_APOSTROPHE		40
--#define KEY_GRAVE		41
--#define KEY_LEFTSHIFT		42
--#define KEY_BACKSLASH		43
--#define KEY_Z			44
--#define KEY_X			45
--#define KEY_C			46
--#define KEY_V			47
--#define KEY_B			48
--#define KEY_N			49
--#define KEY_M			50
--#define KEY_COMMA		51
--#define KEY_DOT			52
--#define KEY_SLASH		53
--#define KEY_RIGHTSHIFT		54
--#define KEY_KPASTERISK		55
--#define KEY_LEFTALT		56
--#define KEY_SPACE		57
--#define KEY_CAPSLOCK		58
--#define KEY_F1			59
--#define KEY_F2			60
--#define KEY_F3			61
--#define KEY_F4			62
--#define KEY_F5			63
--#define KEY_F6			64
--#define KEY_F7			65
--#define KEY_F8			66
--#define KEY_F9			67
--#define KEY_F10			68
--#define KEY_NUMLOCK		69
--#define KEY_SCROLLLOCK		70
--#define KEY_KP7			71
--#define KEY_KP8			72
--#define KEY_KP9			73
--#define KEY_KPMINUS		74
--#define KEY_KP4			75
--#define KEY_KP5			76
--#define KEY_KP6			77
--#define KEY_KPPLUS		78
--#define KEY_KP1			79
--#define KEY_KP2			80
--#define KEY_KP3			81
--#define KEY_KP0			82
--#define KEY_KPDOT		83
--
--#define KEY_ZENKAKUHANKAKU	85
--#define KEY_102ND		86
--#define KEY_F11			87
--#define KEY_F12			88
--#define KEY_RO			89
--#define KEY_KATAKANA		90
--#define KEY_HIRAGANA		91
--#define KEY_HENKAN		92
--#define KEY_KATAKANAHIRAGANA	93
--#define KEY_MUHENKAN		94
--#define KEY_KPJPCOMMA		95
--#define KEY_KPENTER		96
--#define KEY_RIGHTCTRL		97
--#define KEY_KPSLASH		98
--#define KEY_SYSRQ		99
--#define KEY_RIGHTALT		100
--#define KEY_LINEFEED		101
--#define KEY_HOME		102
--#define KEY_UP			103
--#define KEY_PAGEUP		104
--#define KEY_LEFT		105
--#define KEY_RIGHT		106
--#define KEY_END			107
--#define KEY_DOWN		108
--#define KEY_PAGEDOWN		109
--#define KEY_INSERT		110
--#define KEY_DELETE		111
--#define KEY_MACRO		112
--#define KEY_MUTE		113
--#define KEY_VOLUMEDOWN		114
--#define KEY_VOLUMEUP		115
--#define KEY_POWER		116	/* SC System Power Down */
--#define KEY_KPEQUAL		117
--#define KEY_KPPLUSMINUS		118
--#define KEY_PAUSE		119
--#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
--
--#define KEY_KPCOMMA		121
--#define KEY_HANGEUL		122
--#define KEY_HANGUEL		KEY_HANGEUL
--#define KEY_HANJA		123
--#define KEY_YEN			124
--#define KEY_LEFTMETA		125
--#define KEY_RIGHTMETA		126
--#define KEY_COMPOSE		127
--
--#define KEY_STOP		128	/* AC Stop */
--#define KEY_AGAIN		129
--#define KEY_PROPS		130	/* AC Properties */
--#define KEY_UNDO		131	/* AC Undo */
--#define KEY_FRONT		132
--#define KEY_COPY		133	/* AC Copy */
--#define KEY_OPEN		134	/* AC Open */
--#define KEY_PASTE		135	/* AC Paste */
--#define KEY_FIND		136	/* AC Search */
--#define KEY_CUT			137	/* AC Cut */
--#define KEY_HELP		138	/* AL Integrated Help Center */
--#define KEY_MENU		139	/* Menu (show menu) */
--#define KEY_CALC		140	/* AL Calculator */
--#define KEY_SETUP		141
--#define KEY_SLEEP		142	/* SC System Sleep */
--#define KEY_WAKEUP		143	/* System Wake Up */
--#define KEY_FILE		144	/* AL Local Machine Browser */
--#define KEY_SENDFILE		145
--#define KEY_DELETEFILE		146
--#define KEY_XFER		147
--#define KEY_PROG1		148
--#define KEY_PROG2		149
--#define KEY_WWW			150	/* AL Internet Browser */
--#define KEY_MSDOS		151
--#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
--#define KEY_SCREENLOCK		KEY_COFFEE
--#define KEY_DIRECTION		153
--#define KEY_CYCLEWINDOWS	154
--#define KEY_MAIL		155
--#define KEY_BOOKMARKS		156	/* AC Bookmarks */
--#define KEY_COMPUTER		157
--#define KEY_BACK		158	/* AC Back */
--#define KEY_FORWARD		159	/* AC Forward */
--#define KEY_CLOSECD		160
--#define KEY_EJECTCD		161
--#define KEY_EJECTCLOSECD	162
--#define KEY_NEXTSONG		163
--#define KEY_PLAYPAUSE		164
--#define KEY_PREVIOUSSONG	165
--#define KEY_STOPCD		166
--#define KEY_RECORD		167
--#define KEY_REWIND		168
--#define KEY_PHONE		169	/* Media Select Telephone */
--#define KEY_ISO			170
--#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
--#define KEY_HOMEPAGE		172	/* AC Home */
--#define KEY_REFRESH		173	/* AC Refresh */
--#define KEY_EXIT		174	/* AC Exit */
--#define KEY_MOVE		175
--#define KEY_EDIT		176
--#define KEY_SCROLLUP		177
--#define KEY_SCROLLDOWN		178
--#define KEY_KPLEFTPAREN		179
--#define KEY_KPRIGHTPAREN	180
--#define KEY_NEW			181	/* AC New */
--#define KEY_REDO		182	/* AC Redo/Repeat */
--
--#define KEY_F13			183
--#define KEY_F14			184
--#define KEY_F15			185
--#define KEY_F16			186
--#define KEY_F17			187
--#define KEY_F18			188
--#define KEY_F19			189
--#define KEY_F20			190
--#define KEY_F21			191
--#define KEY_F22			192
--#define KEY_F23			193
--#define KEY_F24			194
--
--#define KEY_PLAYCD		200
--#define KEY_PAUSECD		201
--#define KEY_PROG3		202
--#define KEY_PROG4		203
--#define KEY_DASHBOARD		204	/* AL Dashboard */
--#define KEY_SUSPEND		205
--#define KEY_CLOSE		206	/* AC Close */
--#define KEY_PLAY		207
--#define KEY_FASTFORWARD		208
--#define KEY_BASSBOOST		209
--#define KEY_PRINT		210	/* AC Print */
--#define KEY_HP			211
--#define KEY_CAMERA		212
--#define KEY_SOUND		213
--#define KEY_QUESTION		214
--#define KEY_EMAIL		215
--#define KEY_CHAT		216
--#define KEY_SEARCH		217
--#define KEY_CONNECT		218
--#define KEY_FINANCE		219	/* AL Checkbook/Finance */
--#define KEY_SPORT		220
--#define KEY_SHOP		221
--#define KEY_ALTERASE		222
--#define KEY_CANCEL		223	/* AC Cancel */
--#define KEY_BRIGHTNESSDOWN	224
--#define KEY_BRIGHTNESSUP	225
--#define KEY_MEDIA		226
--
--#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
--					   outputs (Monitor/LCD/TV-out/etc) */
--#define KEY_KBDILLUMTOGGLE	228
--#define KEY_KBDILLUMDOWN	229
--#define KEY_KBDILLUMUP		230
--
--#define KEY_SEND		231	/* AC Send */
--#define KEY_REPLY		232	/* AC Reply */
--#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
--#define KEY_SAVE		234	/* AC Save */
--#define KEY_DOCUMENTS		235
--
--#define KEY_BATTERY		236
--
--#define KEY_BLUETOOTH		237
--#define KEY_WLAN		238
--#define KEY_UWB			239
--
--#define KEY_UNKNOWN		240
--
--#define KEY_VIDEO_NEXT		241	/* drive next video source */
--#define KEY_VIDEO_PREV		242	/* drive previous video source */
--#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
--#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
--#define KEY_DISPLAY_OFF		245	/* display device to off state */
--
--#define KEY_WIMAX		246
--#define KEY_RFKILL		247	/* Key that controls all radios */
--
--#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
--
--/* Code 255 is reserved for special needs of AT keyboard driver */
--
--#define BTN_MISC		0x100
--#define BTN_0			0x100
--#define BTN_1			0x101
--#define BTN_2			0x102
--#define BTN_3			0x103
--#define BTN_4			0x104
--#define BTN_5			0x105
--#define BTN_6			0x106
--#define BTN_7			0x107
--#define BTN_8			0x108
--#define BTN_9			0x109
--
--#define BTN_MOUSE		0x110
--#define BTN_LEFT		0x110
--#define BTN_RIGHT		0x111
--#define BTN_MIDDLE		0x112
--#define BTN_SIDE		0x113
--#define BTN_EXTRA		0x114
--#define BTN_FORWARD		0x115
--#define BTN_BACK		0x116
--#define BTN_TASK		0x117
--
--#define BTN_JOYSTICK		0x120
--#define BTN_TRIGGER		0x120
--#define BTN_THUMB		0x121
--#define BTN_THUMB2		0x122
--#define BTN_TOP			0x123
--#define BTN_TOP2		0x124
--#define BTN_PINKIE		0x125
--#define BTN_BASE		0x126
--#define BTN_BASE2		0x127
--#define BTN_BASE3		0x128
--#define BTN_BASE4		0x129
--#define BTN_BASE5		0x12a
--#define BTN_BASE6		0x12b
--#define BTN_DEAD		0x12f
--
--#define BTN_GAMEPAD		0x130
--#define BTN_SOUTH		0x130
--#define BTN_A			BTN_SOUTH
--#define BTN_EAST		0x131
--#define BTN_B			BTN_EAST
--#define BTN_C			0x132
--#define BTN_NORTH		0x133
--#define BTN_X			BTN_NORTH
--#define BTN_WEST		0x134
--#define BTN_Y			BTN_WEST
--#define BTN_Z			0x135
--#define BTN_TL			0x136
--#define BTN_TR			0x137
--#define BTN_TL2			0x138
--#define BTN_TR2			0x139
--#define BTN_SELECT		0x13a
--#define BTN_START		0x13b
--#define BTN_MODE		0x13c
--#define BTN_THUMBL		0x13d
--#define BTN_THUMBR		0x13e
--
--#define BTN_DIGI		0x140
--#define BTN_TOOL_PEN		0x140
--#define BTN_TOOL_RUBBER		0x141
--#define BTN_TOOL_BRUSH		0x142
--#define BTN_TOOL_PENCIL		0x143
--#define BTN_TOOL_AIRBRUSH	0x144
--#define BTN_TOOL_FINGER		0x145
--#define BTN_TOOL_MOUSE		0x146
--#define BTN_TOOL_LENS		0x147
--#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
--#define BTN_TOUCH		0x14a
--#define BTN_STYLUS		0x14b
--#define BTN_STYLUS2		0x14c
--#define BTN_TOOL_DOUBLETAP	0x14d
--#define BTN_TOOL_TRIPLETAP	0x14e
--#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
--
--#define BTN_WHEEL		0x150
--#define BTN_GEAR_DOWN		0x150
--#define BTN_GEAR_UP		0x151
--
--#define KEY_OK			0x160
--#define KEY_SELECT		0x161
--#define KEY_GOTO		0x162
--#define KEY_CLEAR		0x163
--#define KEY_POWER2		0x164
--#define KEY_OPTION		0x165
--#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
--#define KEY_TIME		0x167
--#define KEY_VENDOR		0x168
--#define KEY_ARCHIVE		0x169
--#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
--#define KEY_CHANNEL		0x16b
--#define KEY_FAVORITES		0x16c
--#define KEY_EPG			0x16d
--#define KEY_PVR			0x16e	/* Media Select Home */
--#define KEY_MHP			0x16f
--#define KEY_LANGUAGE		0x170
--#define KEY_TITLE		0x171
--#define KEY_SUBTITLE		0x172
--#define KEY_ANGLE		0x173
--#define KEY_ZOOM		0x174
--#define KEY_MODE		0x175
--#define KEY_KEYBOARD		0x176
--#define KEY_SCREEN		0x177
--#define KEY_PC			0x178	/* Media Select Computer */
--#define KEY_TV			0x179	/* Media Select TV */
--#define KEY_TV2			0x17a	/* Media Select Cable */
--#define KEY_VCR			0x17b	/* Media Select VCR */
--#define KEY_VCR2		0x17c	/* VCR Plus */
--#define KEY_SAT			0x17d	/* Media Select Satellite */
--#define KEY_SAT2		0x17e
--#define KEY_CD			0x17f	/* Media Select CD */
--#define KEY_TAPE		0x180	/* Media Select Tape */
--#define KEY_RADIO		0x181
--#define KEY_TUNER		0x182	/* Media Select Tuner */
--#define KEY_PLAYER		0x183
--#define KEY_TEXT		0x184
--#define KEY_DVD			0x185	/* Media Select DVD */
--#define KEY_AUX			0x186
--#define KEY_MP3			0x187
--#define KEY_AUDIO		0x188	/* AL Audio Browser */
--#define KEY_VIDEO		0x189	/* AL Movie Browser */
--#define KEY_DIRECTORY		0x18a
--#define KEY_LIST		0x18b
--#define KEY_MEMO		0x18c	/* Media Select Messages */
--#define KEY_CALENDAR		0x18d
--#define KEY_RED			0x18e
--#define KEY_GREEN		0x18f
--#define KEY_YELLOW		0x190
--#define KEY_BLUE		0x191
--#define KEY_CHANNELUP		0x192	/* Channel Increment */
--#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
--#define KEY_FIRST		0x194
--#define KEY_LAST		0x195	/* Recall Last */
--#define KEY_AB			0x196
--#define KEY_NEXT		0x197
--#define KEY_RESTART		0x198
--#define KEY_SLOW		0x199
--#define KEY_SHUFFLE		0x19a
--#define KEY_BREAK		0x19b
--#define KEY_PREVIOUS		0x19c
--#define KEY_DIGITS		0x19d
--#define KEY_TEEN		0x19e
--#define KEY_TWEN		0x19f
--#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
--#define KEY_GAMES		0x1a1	/* Media Select Games */
--#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
--#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
--#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
--#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
--#define KEY_EDITOR		0x1a6	/* AL Text Editor */
--#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
--#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
--#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
--#define KEY_DATABASE		0x1aa	/* AL Database App */
--#define KEY_NEWS		0x1ab	/* AL Newsreader */
--#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
--#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
--#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
--#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
--#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
--#define KEY_LOGOFF		0x1b1   /* AL Logoff */
--
--#define KEY_DOLLAR		0x1b2
--#define KEY_EURO		0x1b3
--
--#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
--#define KEY_FRAMEFORWARD	0x1b5
--#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
--#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
--#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
--#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
--#define KEY_IMAGES		0x1ba	/* AL Image Browser */
--
--#define KEY_DEL_EOL		0x1c0
--#define KEY_DEL_EOS		0x1c1
--#define KEY_INS_LINE		0x1c2
--#define KEY_DEL_LINE		0x1c3
--
--#define KEY_FN			0x1d0
--#define KEY_FN_ESC		0x1d1
--#define KEY_FN_F1		0x1d2
--#define KEY_FN_F2		0x1d3
--#define KEY_FN_F3		0x1d4
--#define KEY_FN_F4		0x1d5
--#define KEY_FN_F5		0x1d6
--#define KEY_FN_F6		0x1d7
--#define KEY_FN_F7		0x1d8
--#define KEY_FN_F8		0x1d9
--#define KEY_FN_F9		0x1da
--#define KEY_FN_F10		0x1db
--#define KEY_FN_F11		0x1dc
--#define KEY_FN_F12		0x1dd
--#define KEY_FN_1		0x1de
--#define KEY_FN_2		0x1df
--#define KEY_FN_D		0x1e0
--#define KEY_FN_E		0x1e1
--#define KEY_FN_F		0x1e2
--#define KEY_FN_S		0x1e3
--#define KEY_FN_B		0x1e4
--
--#define KEY_BRL_DOT1		0x1f1
--#define KEY_BRL_DOT2		0x1f2
--#define KEY_BRL_DOT3		0x1f3
--#define KEY_BRL_DOT4		0x1f4
--#define KEY_BRL_DOT5		0x1f5
--#define KEY_BRL_DOT6		0x1f6
--#define KEY_BRL_DOT7		0x1f7
--#define KEY_BRL_DOT8		0x1f8
--#define KEY_BRL_DOT9		0x1f9
--#define KEY_BRL_DOT10		0x1fa
--
--#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
--#define KEY_NUMERIC_1		0x201	/* and other keypads */
--#define KEY_NUMERIC_2		0x202
--#define KEY_NUMERIC_3		0x203
--#define KEY_NUMERIC_4		0x204
--#define KEY_NUMERIC_5		0x205
--#define KEY_NUMERIC_6		0x206
--#define KEY_NUMERIC_7		0x207
--#define KEY_NUMERIC_8		0x208
--#define KEY_NUMERIC_9		0x209
--#define KEY_NUMERIC_STAR	0x20a
--#define KEY_NUMERIC_POUND	0x20b
--
--#define KEY_CAMERA_FOCUS	0x210
--#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
--
--#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
--#define KEY_TOUCHPAD_ON		0x213
--#define KEY_TOUCHPAD_OFF	0x214
--
--#define KEY_CAMERA_ZOOMIN	0x215
--#define KEY_CAMERA_ZOOMOUT	0x216
--#define KEY_CAMERA_UP		0x217
--#define KEY_CAMERA_DOWN		0x218
--#define KEY_CAMERA_LEFT		0x219
--#define KEY_CAMERA_RIGHT	0x21a
--
--#define KEY_ATTENDANT_ON	0x21b
--#define KEY_ATTENDANT_OFF	0x21c
--#define KEY_ATTENDANT_TOGGLE	0x21d	/* Attendant call on or off */
--#define KEY_LIGHTS_TOGGLE	0x21e	/* Reading light on or off */
--
--#define BTN_DPAD_UP		0x220
--#define BTN_DPAD_DOWN		0x221
--#define BTN_DPAD_LEFT		0x222
--#define BTN_DPAD_RIGHT		0x223
-+#include "linux-event-codes.h"
- 
- #define MATRIX_KEY(row, col, code)	\
- 	((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
---- /dev/null
-+++ b/include/dt-bindings/input/linux-event-codes.h
-@@ -0,0 +1,805 @@
-+/*
-+ * Input event codes
-+ *
-+ *    *** IMPORTANT ***
-+ * This file is not only included from C-code but also from devicetree source
-+ * files. As such this file MUST only contain comments and defines.
-+ *
-+ * Copyright (c) 1999-2002 Vojtech Pavlik
-+ * Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+#ifndef _UAPI_INPUT_EVENT_CODES_H
-+#define _UAPI_INPUT_EVENT_CODES_H
-+
-+/*
-+ * Device properties and quirks
-+ */
-+
-+#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
-+#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
-+#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
-+#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
-+#define INPUT_PROP_TOPBUTTONPAD		0x04	/* softbuttons at top of pad */
-+#define INPUT_PROP_POINTING_STICK	0x05	/* is a pointing stick */
-+#define INPUT_PROP_ACCELEROMETER	0x06	/* has accelerometer */
-+
-+#define INPUT_PROP_MAX			0x1f
-+#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
-+
-+/*
-+ * Event types
-+ */
-+
-+#define EV_SYN			0x00
-+#define EV_KEY			0x01
-+#define EV_REL			0x02
-+#define EV_ABS			0x03
-+#define EV_MSC			0x04
-+#define EV_SW			0x05
-+#define EV_LED			0x11
-+#define EV_SND			0x12
-+#define EV_REP			0x14
-+#define EV_FF			0x15
-+#define EV_PWR			0x16
-+#define EV_FF_STATUS		0x17
-+#define EV_MAX			0x1f
-+#define EV_CNT			(EV_MAX+1)
-+
-+/*
-+ * Synchronization events.
-+ */
-+
-+#define SYN_REPORT		0
-+#define SYN_CONFIG		1
-+#define SYN_MT_REPORT		2
-+#define SYN_DROPPED		3
-+#define SYN_MAX			0xf
-+#define SYN_CNT			(SYN_MAX+1)
-+
-+/*
-+ * Keys and buttons
-+ *
-+ * Most of the keys/buttons are modeled after USB HUT 1.12
-+ * (see http://www.usb.org/developers/hidpage).
-+ * Abbreviations in the comments:
-+ * AC - Application Control
-+ * AL - Application Launch Button
-+ * SC - System Control
-+ */
-+
-+#define KEY_RESERVED		0
-+#define KEY_ESC			1
-+#define KEY_1			2
-+#define KEY_2			3
-+#define KEY_3			4
-+#define KEY_4			5
-+#define KEY_5			6
-+#define KEY_6			7
-+#define KEY_7			8
-+#define KEY_8			9
-+#define KEY_9			10
-+#define KEY_0			11
-+#define KEY_MINUS		12
-+#define KEY_EQUAL		13
-+#define KEY_BACKSPACE		14
-+#define KEY_TAB			15
-+#define KEY_Q			16
-+#define KEY_W			17
-+#define KEY_E			18
-+#define KEY_R			19
-+#define KEY_T			20
-+#define KEY_Y			21
-+#define KEY_U			22
-+#define KEY_I			23
-+#define KEY_O			24
-+#define KEY_P			25
-+#define KEY_LEFTBRACE		26
-+#define KEY_RIGHTBRACE		27
-+#define KEY_ENTER		28
-+#define KEY_LEFTCTRL		29
-+#define KEY_A			30
-+#define KEY_S			31
-+#define KEY_D			32
-+#define KEY_F			33
-+#define KEY_G			34
-+#define KEY_H			35
-+#define KEY_J			36
-+#define KEY_K			37
-+#define KEY_L			38
-+#define KEY_SEMICOLON		39
-+#define KEY_APOSTROPHE		40
-+#define KEY_GRAVE		41
-+#define KEY_LEFTSHIFT		42
-+#define KEY_BACKSLASH		43
-+#define KEY_Z			44
-+#define KEY_X			45
-+#define KEY_C			46
-+#define KEY_V			47
-+#define KEY_B			48
-+#define KEY_N			49
-+#define KEY_M			50
-+#define KEY_COMMA		51
-+#define KEY_DOT			52
-+#define KEY_SLASH		53
-+#define KEY_RIGHTSHIFT		54
-+#define KEY_KPASTERISK		55
-+#define KEY_LEFTALT		56
-+#define KEY_SPACE		57
-+#define KEY_CAPSLOCK		58
-+#define KEY_F1			59
-+#define KEY_F2			60
-+#define KEY_F3			61
-+#define KEY_F4			62
-+#define KEY_F5			63
-+#define KEY_F6			64
-+#define KEY_F7			65
-+#define KEY_F8			66
-+#define KEY_F9			67
-+#define KEY_F10			68
-+#define KEY_NUMLOCK		69
-+#define KEY_SCROLLLOCK		70
-+#define KEY_KP7			71
-+#define KEY_KP8			72
-+#define KEY_KP9			73
-+#define KEY_KPMINUS		74
-+#define KEY_KP4			75
-+#define KEY_KP5			76
-+#define KEY_KP6			77
-+#define KEY_KPPLUS		78
-+#define KEY_KP1			79
-+#define KEY_KP2			80
-+#define KEY_KP3			81
-+#define KEY_KP0			82
-+#define KEY_KPDOT		83
-+
-+#define KEY_ZENKAKUHANKAKU	85
-+#define KEY_102ND		86
-+#define KEY_F11			87
-+#define KEY_F12			88
-+#define KEY_RO			89
-+#define KEY_KATAKANA		90
-+#define KEY_HIRAGANA		91
-+#define KEY_HENKAN		92
-+#define KEY_KATAKANAHIRAGANA	93
-+#define KEY_MUHENKAN		94
-+#define KEY_KPJPCOMMA		95
-+#define KEY_KPENTER		96
-+#define KEY_RIGHTCTRL		97
-+#define KEY_KPSLASH		98
-+#define KEY_SYSRQ		99
-+#define KEY_RIGHTALT		100
-+#define KEY_LINEFEED		101
-+#define KEY_HOME		102
-+#define KEY_UP			103
-+#define KEY_PAGEUP		104
-+#define KEY_LEFT		105
-+#define KEY_RIGHT		106
-+#define KEY_END			107
-+#define KEY_DOWN		108
-+#define KEY_PAGEDOWN		109
-+#define KEY_INSERT		110
-+#define KEY_DELETE		111
-+#define KEY_MACRO		112
-+#define KEY_MUTE		113
-+#define KEY_VOLUMEDOWN		114
-+#define KEY_VOLUMEUP		115
-+#define KEY_POWER		116	/* SC System Power Down */
-+#define KEY_KPEQUAL		117
-+#define KEY_KPPLUSMINUS		118
-+#define KEY_PAUSE		119
-+#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
-+
-+#define KEY_KPCOMMA		121
-+#define KEY_HANGEUL		122
-+#define KEY_HANGUEL		KEY_HANGEUL
-+#define KEY_HANJA		123
-+#define KEY_YEN			124
-+#define KEY_LEFTMETA		125
-+#define KEY_RIGHTMETA		126
-+#define KEY_COMPOSE		127
-+
-+#define KEY_STOP		128	/* AC Stop */
-+#define KEY_AGAIN		129
-+#define KEY_PROPS		130	/* AC Properties */
-+#define KEY_UNDO		131	/* AC Undo */
-+#define KEY_FRONT		132
-+#define KEY_COPY		133	/* AC Copy */
-+#define KEY_OPEN		134	/* AC Open */
-+#define KEY_PASTE		135	/* AC Paste */
-+#define KEY_FIND		136	/* AC Search */
-+#define KEY_CUT			137	/* AC Cut */
-+#define KEY_HELP		138	/* AL Integrated Help Center */
-+#define KEY_MENU		139	/* Menu (show menu) */
-+#define KEY_CALC		140	/* AL Calculator */
-+#define KEY_SETUP		141
-+#define KEY_SLEEP		142	/* SC System Sleep */
-+#define KEY_WAKEUP		143	/* System Wake Up */
-+#define KEY_FILE		144	/* AL Local Machine Browser */
-+#define KEY_SENDFILE		145
-+#define KEY_DELETEFILE		146
-+#define KEY_XFER		147
-+#define KEY_PROG1		148
-+#define KEY_PROG2		149
-+#define KEY_WWW			150	/* AL Internet Browser */
-+#define KEY_MSDOS		151
-+#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
-+#define KEY_SCREENLOCK		KEY_COFFEE
-+#define KEY_ROTATE_DISPLAY	153	/* Display orientation for e.g. tablets */
-+#define KEY_DIRECTION		KEY_ROTATE_DISPLAY
-+#define KEY_CYCLEWINDOWS	154
-+#define KEY_MAIL		155
-+#define KEY_BOOKMARKS		156	/* AC Bookmarks */
-+#define KEY_COMPUTER		157
-+#define KEY_BACK		158	/* AC Back */
-+#define KEY_FORWARD		159	/* AC Forward */
-+#define KEY_CLOSECD		160
-+#define KEY_EJECTCD		161
-+#define KEY_EJECTCLOSECD	162
-+#define KEY_NEXTSONG		163
-+#define KEY_PLAYPAUSE		164
-+#define KEY_PREVIOUSSONG	165
-+#define KEY_STOPCD		166
-+#define KEY_RECORD		167
-+#define KEY_REWIND		168
-+#define KEY_PHONE		169	/* Media Select Telephone */
-+#define KEY_ISO			170
-+#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
-+#define KEY_HOMEPAGE		172	/* AC Home */
-+#define KEY_REFRESH		173	/* AC Refresh */
-+#define KEY_EXIT		174	/* AC Exit */
-+#define KEY_MOVE		175
-+#define KEY_EDIT		176
-+#define KEY_SCROLLUP		177
-+#define KEY_SCROLLDOWN		178
-+#define KEY_KPLEFTPAREN		179
-+#define KEY_KPRIGHTPAREN	180
-+#define KEY_NEW			181	/* AC New */
-+#define KEY_REDO		182	/* AC Redo/Repeat */
-+
-+#define KEY_F13			183
-+#define KEY_F14			184
-+#define KEY_F15			185
-+#define KEY_F16			186
-+#define KEY_F17			187
-+#define KEY_F18			188
-+#define KEY_F19			189
-+#define KEY_F20			190
-+#define KEY_F21			191
-+#define KEY_F22			192
-+#define KEY_F23			193
-+#define KEY_F24			194
-+
-+#define KEY_PLAYCD		200
-+#define KEY_PAUSECD		201
-+#define KEY_PROG3		202
-+#define KEY_PROG4		203
-+#define KEY_DASHBOARD		204	/* AL Dashboard */
-+#define KEY_SUSPEND		205
-+#define KEY_CLOSE		206	/* AC Close */
-+#define KEY_PLAY		207
-+#define KEY_FASTFORWARD		208
-+#define KEY_BASSBOOST		209
-+#define KEY_PRINT		210	/* AC Print */
-+#define KEY_HP			211
-+#define KEY_CAMERA		212
-+#define KEY_SOUND		213
-+#define KEY_QUESTION		214
-+#define KEY_EMAIL		215
-+#define KEY_CHAT		216
-+#define KEY_SEARCH		217
-+#define KEY_CONNECT		218
-+#define KEY_FINANCE		219	/* AL Checkbook/Finance */
-+#define KEY_SPORT		220
-+#define KEY_SHOP		221
-+#define KEY_ALTERASE		222
-+#define KEY_CANCEL		223	/* AC Cancel */
-+#define KEY_BRIGHTNESSDOWN	224
-+#define KEY_BRIGHTNESSUP	225
-+#define KEY_MEDIA		226
-+
-+#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
-+					   outputs (Monitor/LCD/TV-out/etc) */
-+#define KEY_KBDILLUMTOGGLE	228
-+#define KEY_KBDILLUMDOWN	229
-+#define KEY_KBDILLUMUP		230
-+
-+#define KEY_SEND		231	/* AC Send */
-+#define KEY_REPLY		232	/* AC Reply */
-+#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
-+#define KEY_SAVE		234	/* AC Save */
-+#define KEY_DOCUMENTS		235
-+
-+#define KEY_BATTERY		236
-+
-+#define KEY_BLUETOOTH		237
-+#define KEY_WLAN		238
-+#define KEY_UWB			239
-+
-+#define KEY_UNKNOWN		240
-+
-+#define KEY_VIDEO_NEXT		241	/* drive next video source */
-+#define KEY_VIDEO_PREV		242	/* drive previous video source */
-+#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
-+#define KEY_BRIGHTNESS_AUTO	244	/* Set Auto Brightness: manual
-+					  brightness control is off,
-+					  rely on ambient */
-+#define KEY_BRIGHTNESS_ZERO	KEY_BRIGHTNESS_AUTO
-+#define KEY_DISPLAY_OFF		245	/* display device to off state */
-+
-+#define KEY_WWAN		246	/* Wireless WAN (LTE, UMTS, GSM, etc.) */
-+#define KEY_WIMAX		KEY_WWAN
-+#define KEY_RFKILL		247	/* Key that controls all radios */
-+
-+#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
-+
-+/* Code 255 is reserved for special needs of AT keyboard driver */
-+
-+#define BTN_MISC		0x100
-+#define BTN_0			0x100
-+#define BTN_1			0x101
-+#define BTN_2			0x102
-+#define BTN_3			0x103
-+#define BTN_4			0x104
-+#define BTN_5			0x105
-+#define BTN_6			0x106
-+#define BTN_7			0x107
-+#define BTN_8			0x108
-+#define BTN_9			0x109
-+
-+#define BTN_MOUSE		0x110
-+#define BTN_LEFT		0x110
-+#define BTN_RIGHT		0x111
-+#define BTN_MIDDLE		0x112
-+#define BTN_SIDE		0x113
-+#define BTN_EXTRA		0x114
-+#define BTN_FORWARD		0x115
-+#define BTN_BACK		0x116
-+#define BTN_TASK		0x117
-+
-+#define BTN_JOYSTICK		0x120
-+#define BTN_TRIGGER		0x120
-+#define BTN_THUMB		0x121
-+#define BTN_THUMB2		0x122
-+#define BTN_TOP			0x123
-+#define BTN_TOP2		0x124
-+#define BTN_PINKIE		0x125
-+#define BTN_BASE		0x126
-+#define BTN_BASE2		0x127
-+#define BTN_BASE3		0x128
-+#define BTN_BASE4		0x129
-+#define BTN_BASE5		0x12a
-+#define BTN_BASE6		0x12b
-+#define BTN_DEAD		0x12f
-+
-+#define BTN_GAMEPAD		0x130
-+#define BTN_SOUTH		0x130
-+#define BTN_A			BTN_SOUTH
-+#define BTN_EAST		0x131
-+#define BTN_B			BTN_EAST
-+#define BTN_C			0x132
-+#define BTN_NORTH		0x133
-+#define BTN_X			BTN_NORTH
-+#define BTN_WEST		0x134
-+#define BTN_Y			BTN_WEST
-+#define BTN_Z			0x135
-+#define BTN_TL			0x136
-+#define BTN_TR			0x137
-+#define BTN_TL2			0x138
-+#define BTN_TR2			0x139
-+#define BTN_SELECT		0x13a
-+#define BTN_START		0x13b
-+#define BTN_MODE		0x13c
-+#define BTN_THUMBL		0x13d
-+#define BTN_THUMBR		0x13e
-+
-+#define BTN_DIGI		0x140
-+#define BTN_TOOL_PEN		0x140
-+#define BTN_TOOL_RUBBER		0x141
-+#define BTN_TOOL_BRUSH		0x142
-+#define BTN_TOOL_PENCIL		0x143
-+#define BTN_TOOL_AIRBRUSH	0x144
-+#define BTN_TOOL_FINGER		0x145
-+#define BTN_TOOL_MOUSE		0x146
-+#define BTN_TOOL_LENS		0x147
-+#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
-+#define BTN_TOUCH		0x14a
-+#define BTN_STYLUS		0x14b
-+#define BTN_STYLUS2		0x14c
-+#define BTN_TOOL_DOUBLETAP	0x14d
-+#define BTN_TOOL_TRIPLETAP	0x14e
-+#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
-+
-+#define BTN_WHEEL		0x150
-+#define BTN_GEAR_DOWN		0x150
-+#define BTN_GEAR_UP		0x151
-+
-+#define KEY_OK			0x160
-+#define KEY_SELECT		0x161
-+#define KEY_GOTO		0x162
-+#define KEY_CLEAR		0x163
-+#define KEY_POWER2		0x164
-+#define KEY_OPTION		0x165
-+#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
-+#define KEY_TIME		0x167
-+#define KEY_VENDOR		0x168
-+#define KEY_ARCHIVE		0x169
-+#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
-+#define KEY_CHANNEL		0x16b
-+#define KEY_FAVORITES		0x16c
-+#define KEY_EPG			0x16d
-+#define KEY_PVR			0x16e	/* Media Select Home */
-+#define KEY_MHP			0x16f
-+#define KEY_LANGUAGE		0x170
-+#define KEY_TITLE		0x171
-+#define KEY_SUBTITLE		0x172
-+#define KEY_ANGLE		0x173
-+#define KEY_ZOOM		0x174
-+#define KEY_MODE		0x175
-+#define KEY_KEYBOARD		0x176
-+#define KEY_SCREEN		0x177
-+#define KEY_PC			0x178	/* Media Select Computer */
-+#define KEY_TV			0x179	/* Media Select TV */
-+#define KEY_TV2			0x17a	/* Media Select Cable */
-+#define KEY_VCR			0x17b	/* Media Select VCR */
-+#define KEY_VCR2		0x17c	/* VCR Plus */
-+#define KEY_SAT			0x17d	/* Media Select Satellite */
-+#define KEY_SAT2		0x17e
-+#define KEY_CD			0x17f	/* Media Select CD */
-+#define KEY_TAPE		0x180	/* Media Select Tape */
-+#define KEY_RADIO		0x181
-+#define KEY_TUNER		0x182	/* Media Select Tuner */
-+#define KEY_PLAYER		0x183
-+#define KEY_TEXT		0x184
-+#define KEY_DVD			0x185	/* Media Select DVD */
-+#define KEY_AUX			0x186
-+#define KEY_MP3			0x187
-+#define KEY_AUDIO		0x188	/* AL Audio Browser */
-+#define KEY_VIDEO		0x189	/* AL Movie Browser */
-+#define KEY_DIRECTORY		0x18a
-+#define KEY_LIST		0x18b
-+#define KEY_MEMO		0x18c	/* Media Select Messages */
-+#define KEY_CALENDAR		0x18d
-+#define KEY_RED			0x18e
-+#define KEY_GREEN		0x18f
-+#define KEY_YELLOW		0x190
-+#define KEY_BLUE		0x191
-+#define KEY_CHANNELUP		0x192	/* Channel Increment */
-+#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
-+#define KEY_FIRST		0x194
-+#define KEY_LAST		0x195	/* Recall Last */
-+#define KEY_AB			0x196
-+#define KEY_NEXT		0x197
-+#define KEY_RESTART		0x198
-+#define KEY_SLOW		0x199
-+#define KEY_SHUFFLE		0x19a
-+#define KEY_BREAK		0x19b
-+#define KEY_PREVIOUS		0x19c
-+#define KEY_DIGITS		0x19d
-+#define KEY_TEEN		0x19e
-+#define KEY_TWEN		0x19f
-+#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
-+#define KEY_GAMES		0x1a1	/* Media Select Games */
-+#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
-+#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
-+#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
-+#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
-+#define KEY_EDITOR		0x1a6	/* AL Text Editor */
-+#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
-+#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
-+#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
-+#define KEY_DATABASE		0x1aa	/* AL Database App */
-+#define KEY_NEWS		0x1ab	/* AL Newsreader */
-+#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
-+#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
-+#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
-+#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
-+#define KEY_BRIGHTNESS_TOGGLE	KEY_DISPLAYTOGGLE
-+#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
-+#define KEY_LOGOFF		0x1b1   /* AL Logoff */
-+
-+#define KEY_DOLLAR		0x1b2
-+#define KEY_EURO		0x1b3
-+
-+#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
-+#define KEY_FRAMEFORWARD	0x1b5
-+#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
-+#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
-+#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
-+#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
-+#define KEY_IMAGES		0x1ba	/* AL Image Browser */
-+
-+#define KEY_DEL_EOL		0x1c0
-+#define KEY_DEL_EOS		0x1c1
-+#define KEY_INS_LINE		0x1c2
-+#define KEY_DEL_LINE		0x1c3
-+
-+#define KEY_FN			0x1d0
-+#define KEY_FN_ESC		0x1d1
-+#define KEY_FN_F1		0x1d2
-+#define KEY_FN_F2		0x1d3
-+#define KEY_FN_F3		0x1d4
-+#define KEY_FN_F4		0x1d5
-+#define KEY_FN_F5		0x1d6
-+#define KEY_FN_F6		0x1d7
-+#define KEY_FN_F7		0x1d8
-+#define KEY_FN_F8		0x1d9
-+#define KEY_FN_F9		0x1da
-+#define KEY_FN_F10		0x1db
-+#define KEY_FN_F11		0x1dc
-+#define KEY_FN_F12		0x1dd
-+#define KEY_FN_1		0x1de
-+#define KEY_FN_2		0x1df
-+#define KEY_FN_D		0x1e0
-+#define KEY_FN_E		0x1e1
-+#define KEY_FN_F		0x1e2
-+#define KEY_FN_S		0x1e3
-+#define KEY_FN_B		0x1e4
-+
-+#define KEY_BRL_DOT1		0x1f1
-+#define KEY_BRL_DOT2		0x1f2
-+#define KEY_BRL_DOT3		0x1f3
-+#define KEY_BRL_DOT4		0x1f4
-+#define KEY_BRL_DOT5		0x1f5
-+#define KEY_BRL_DOT6		0x1f6
-+#define KEY_BRL_DOT7		0x1f7
-+#define KEY_BRL_DOT8		0x1f8
-+#define KEY_BRL_DOT9		0x1f9
-+#define KEY_BRL_DOT10		0x1fa
-+
-+#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
-+#define KEY_NUMERIC_1		0x201	/* and other keypads */
-+#define KEY_NUMERIC_2		0x202
-+#define KEY_NUMERIC_3		0x203
-+#define KEY_NUMERIC_4		0x204
-+#define KEY_NUMERIC_5		0x205
-+#define KEY_NUMERIC_6		0x206
-+#define KEY_NUMERIC_7		0x207
-+#define KEY_NUMERIC_8		0x208
-+#define KEY_NUMERIC_9		0x209
-+#define KEY_NUMERIC_STAR	0x20a
-+#define KEY_NUMERIC_POUND	0x20b
-+#define KEY_NUMERIC_A		0x20c	/* Phone key A - HUT Telephony 0xb9 */
-+#define KEY_NUMERIC_B		0x20d
-+#define KEY_NUMERIC_C		0x20e
-+#define KEY_NUMERIC_D		0x20f
-+
-+#define KEY_CAMERA_FOCUS	0x210
-+#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
-+
-+#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
-+#define KEY_TOUCHPAD_ON		0x213
-+#define KEY_TOUCHPAD_OFF	0x214
-+
-+#define KEY_CAMERA_ZOOMIN	0x215
-+#define KEY_CAMERA_ZOOMOUT	0x216
-+#define KEY_CAMERA_UP		0x217
-+#define KEY_CAMERA_DOWN		0x218
-+#define KEY_CAMERA_LEFT		0x219
-+#define KEY_CAMERA_RIGHT	0x21a
-+
-+#define KEY_ATTENDANT_ON	0x21b
-+#define KEY_ATTENDANT_OFF	0x21c
-+#define KEY_ATTENDANT_TOGGLE	0x21d	/* Attendant call on or off */
-+#define KEY_LIGHTS_TOGGLE	0x21e	/* Reading light on or off */
-+
-+#define BTN_DPAD_UP		0x220
-+#define BTN_DPAD_DOWN		0x221
-+#define BTN_DPAD_LEFT		0x222
-+#define BTN_DPAD_RIGHT		0x223
-+
-+#define KEY_ALS_TOGGLE		0x230	/* Ambient light sensor */
-+
-+#define KEY_BUTTONCONFIG		0x240	/* AL Button Configuration */
-+#define KEY_TASKMANAGER		0x241	/* AL Task/Project Manager */
-+#define KEY_JOURNAL		0x242	/* AL Log/Journal/Timecard */
-+#define KEY_CONTROLPANEL		0x243	/* AL Control Panel */
-+#define KEY_APPSELECT		0x244	/* AL Select Task/Application */
-+#define KEY_SCREENSAVER		0x245	/* AL Screen Saver */
-+#define KEY_VOICECOMMAND		0x246	/* Listening Voice Command */
-+
-+#define KEY_BRIGHTNESS_MIN		0x250	/* Set Brightness to Minimum */
-+#define KEY_BRIGHTNESS_MAX		0x251	/* Set Brightness to Maximum */
-+
-+#define KEY_KBDINPUTASSIST_PREV		0x260
-+#define KEY_KBDINPUTASSIST_NEXT		0x261
-+#define KEY_KBDINPUTASSIST_PREVGROUP		0x262
-+#define KEY_KBDINPUTASSIST_NEXTGROUP		0x263
-+#define KEY_KBDINPUTASSIST_ACCEPT		0x264
-+#define KEY_KBDINPUTASSIST_CANCEL		0x265
-+
-+#define BTN_TRIGGER_HAPPY		0x2c0
-+#define BTN_TRIGGER_HAPPY1		0x2c0
-+#define BTN_TRIGGER_HAPPY2		0x2c1
-+#define BTN_TRIGGER_HAPPY3		0x2c2
-+#define BTN_TRIGGER_HAPPY4		0x2c3
-+#define BTN_TRIGGER_HAPPY5		0x2c4
-+#define BTN_TRIGGER_HAPPY6		0x2c5
-+#define BTN_TRIGGER_HAPPY7		0x2c6
-+#define BTN_TRIGGER_HAPPY8		0x2c7
-+#define BTN_TRIGGER_HAPPY9		0x2c8
-+#define BTN_TRIGGER_HAPPY10		0x2c9
-+#define BTN_TRIGGER_HAPPY11		0x2ca
-+#define BTN_TRIGGER_HAPPY12		0x2cb
-+#define BTN_TRIGGER_HAPPY13		0x2cc
-+#define BTN_TRIGGER_HAPPY14		0x2cd
-+#define BTN_TRIGGER_HAPPY15		0x2ce
-+#define BTN_TRIGGER_HAPPY16		0x2cf
-+#define BTN_TRIGGER_HAPPY17		0x2d0
-+#define BTN_TRIGGER_HAPPY18		0x2d1
-+#define BTN_TRIGGER_HAPPY19		0x2d2
-+#define BTN_TRIGGER_HAPPY20		0x2d3
-+#define BTN_TRIGGER_HAPPY21		0x2d4
-+#define BTN_TRIGGER_HAPPY22		0x2d5
-+#define BTN_TRIGGER_HAPPY23		0x2d6
-+#define BTN_TRIGGER_HAPPY24		0x2d7
-+#define BTN_TRIGGER_HAPPY25		0x2d8
-+#define BTN_TRIGGER_HAPPY26		0x2d9
-+#define BTN_TRIGGER_HAPPY27		0x2da
-+#define BTN_TRIGGER_HAPPY28		0x2db
-+#define BTN_TRIGGER_HAPPY29		0x2dc
-+#define BTN_TRIGGER_HAPPY30		0x2dd
-+#define BTN_TRIGGER_HAPPY31		0x2de
-+#define BTN_TRIGGER_HAPPY32		0x2df
-+#define BTN_TRIGGER_HAPPY33		0x2e0
-+#define BTN_TRIGGER_HAPPY34		0x2e1
-+#define BTN_TRIGGER_HAPPY35		0x2e2
-+#define BTN_TRIGGER_HAPPY36		0x2e3
-+#define BTN_TRIGGER_HAPPY37		0x2e4
-+#define BTN_TRIGGER_HAPPY38		0x2e5
-+#define BTN_TRIGGER_HAPPY39		0x2e6
-+#define BTN_TRIGGER_HAPPY40		0x2e7
-+
-+/* We avoid low common keys in module aliases so they don't get huge. */
-+#define KEY_MIN_INTERESTING	KEY_MUTE
-+#define KEY_MAX			0x2ff
-+#define KEY_CNT			(KEY_MAX+1)
-+
-+/*
-+ * Relative axes
-+ */
-+
-+#define REL_X			0x00
-+#define REL_Y			0x01
-+#define REL_Z			0x02
-+#define REL_RX			0x03
-+#define REL_RY			0x04
-+#define REL_RZ			0x05
-+#define REL_HWHEEL		0x06
-+#define REL_DIAL		0x07
-+#define REL_WHEEL		0x08
-+#define REL_MISC		0x09
-+#define REL_MAX			0x0f
-+#define REL_CNT			(REL_MAX+1)
-+
-+/*
-+ * Absolute axes
-+ */
-+
-+#define ABS_X			0x00
-+#define ABS_Y			0x01
-+#define ABS_Z			0x02
-+#define ABS_RX			0x03
-+#define ABS_RY			0x04
-+#define ABS_RZ			0x05
-+#define ABS_THROTTLE		0x06
-+#define ABS_RUDDER		0x07
-+#define ABS_WHEEL		0x08
-+#define ABS_GAS			0x09
-+#define ABS_BRAKE		0x0a
-+#define ABS_HAT0X		0x10
-+#define ABS_HAT0Y		0x11
-+#define ABS_HAT1X		0x12
-+#define ABS_HAT1Y		0x13
-+#define ABS_HAT2X		0x14
-+#define ABS_HAT2Y		0x15
-+#define ABS_HAT3X		0x16
-+#define ABS_HAT3Y		0x17
-+#define ABS_PRESSURE		0x18
-+#define ABS_DISTANCE		0x19
-+#define ABS_TILT_X		0x1a
-+#define ABS_TILT_Y		0x1b
-+#define ABS_TOOL_WIDTH		0x1c
-+
-+#define ABS_VOLUME		0x20
-+
-+#define ABS_MISC		0x28
-+
-+#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
-+#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
-+#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
-+#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
-+#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
-+#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
-+#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
-+#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
-+#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
-+#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
-+#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
-+#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
-+#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
-+#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
-+#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
-+
-+
-+#define ABS_MAX			0x3f
-+#define ABS_CNT			(ABS_MAX+1)
-+
-+/*
-+ * Switch events
-+ */
-+
-+#define SW_LID			0x00  /* set = lid shut */
-+#define SW_TABLET_MODE		0x01  /* set = tablet mode */
-+#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
-+#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
-+					 set = radio enabled */
-+#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
-+#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
-+#define SW_DOCK			0x05  /* set = plugged into dock */
-+#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
-+#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
-+#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
-+#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
-+#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
-+#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
-+#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
-+#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
-+#define SW_MUTE_DEVICE		0x0e  /* set = device disabled */
-+#define SW_MAX			0x0f
-+#define SW_CNT			(SW_MAX+1)
-+
-+/*
-+ * Misc events
-+ */
-+
-+#define MSC_SERIAL		0x00
-+#define MSC_PULSELED		0x01
-+#define MSC_GESTURE		0x02
-+#define MSC_RAW			0x03
-+#define MSC_SCAN		0x04
-+#define MSC_TIMESTAMP		0x05
-+#define MSC_MAX			0x07
-+#define MSC_CNT			(MSC_MAX+1)
-+
-+/*
-+ * LEDs
-+ */
-+
-+#define LED_NUML		0x00
-+#define LED_CAPSL		0x01
-+#define LED_SCROLLL		0x02
-+#define LED_COMPOSE		0x03
-+#define LED_KANA		0x04
-+#define LED_SLEEP		0x05
-+#define LED_SUSPEND		0x06
-+#define LED_MUTE		0x07
-+#define LED_MISC		0x08
-+#define LED_MAIL		0x09
-+#define LED_CHARGING		0x0a
-+#define LED_MAX			0x0f
-+#define LED_CNT			(LED_MAX+1)
-+
-+/*
-+ * Autorepeat values
-+ */
-+
-+#define REP_DELAY		0x00
-+#define REP_PERIOD		0x01
-+#define REP_MAX			0x01
-+#define REP_CNT			(REP_MAX+1)
-+
-+/*
-+ * Sounds
-+ */
-+
-+#define SND_CLICK		0x00
-+#define SND_BELL		0x01
-+#define SND_TONE		0x02
-+#define SND_MAX			0x07
-+#define SND_CNT			(SND_MAX+1)
-+
-+#endif
diff --git a/package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch b/package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch
deleted file mode 100644
index e36f9e3c5a..0000000000
--- a/package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch
+++ /dev/null
@@ -1,7211 +0,0 @@ 
-From 80e5f83c0fc4bf42110cc55ce671ad7ddc7b08a4 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 14 Mar 2016 17:37:09 +0100
-Subject: [PATCH] sunxi: Sync dts files with the upstream kernel
-
-Sync dts files with the upstream kernel including
-changes queued for 4.6:
-
-https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6
-
-Note this adds a number of new unused board dts files. I've asked the
-authors of the kernel commits adding these to submit a matching defconfig
-to u-boot.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- arch/arm/dts/Makefile                              |   8 +-
- arch/arm/dts/axp22x.dtsi                           | 145 ++++++++++++
- arch/arm/dts/sun4i-a10-a1000.dts                   |   4 +
- arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts         |  22 ++
- arch/arm/dts/sun4i-a10-cubieboard.dts              |   4 +
- arch/arm/dts/sun4i-a10-gemei-g9.dts                |  63 +++++-
- arch/arm/dts/sun4i-a10-inet1.dts                   |  48 ++++
- arch/arm/dts/sun4i-a10-inet97fv2.dts               | 127 ++++++++++-
- arch/arm/dts/sun4i-a10-inet9f-rev03.dts            | 181 +++++++++++++++
- arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts    |  86 +------
- arch/arm/dts/sun4i-a10-jesurun-q5.dts              |  15 ++
- arch/arm/dts/sun4i-a10-marsboard.dts               |  23 ++
- arch/arm/dts/sun4i-a10-mk802.dts                   |  37 +++
- arch/arm/dts/sun4i-a10-olinuxino-lime.dts          |  12 +
- arch/arm/dts/sun4i-a10-pcduino.dts                 |  58 ++++-
- arch/arm/dts/sun4i-a10-pcduino2.dts                |  78 +++++++
- arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts        |  69 ++++++
- arch/arm/dts/sun4i-a10.dtsi                        | 153 +++++++++++--
- arch/arm/dts/sun5i-a10s-auxtek-t004.dts            |  14 ++
- arch/arm/dts/sun5i-a10s-olinuxino-micro.dts        |   2 +-
- arch/arm/dts/sun5i-a13-empire-electronix-d709.dts  |  19 +-
- arch/arm/dts/sun5i-a13-inet-98v-rev2.dts           |  26 +--
- arch/arm/dts/sun5i-a13-utoo-p66.dts                |  30 +++
- arch/arm/dts/sun5i-q8-common.dtsi                  |  10 +
- arch/arm/dts/sun5i-r8-chip.dts                     |  47 +++-
- arch/arm/dts/sun5i.dtsi                            |  31 +++
- arch/arm/dts/sun6i-a31-colombus.dts                |  24 ++
- arch/arm/dts/sun6i-a31-hummingbird.dts             | 132 ++++++-----
- arch/arm/dts/sun6i-a31.dtsi                        |  65 +++++-
- arch/arm/dts/sun6i-a31s-primo81.dts                | 247 ++++++++++++++++++++-
- arch/arm/dts/sun6i-a31s-sina31s-core.dtsi          | 142 ++++++++++++
- arch/arm/dts/sun6i-a31s-sina31s.dts                | 153 +++++++++++++
- .../arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 205 +++++++++++++++++
- arch/arm/dts/sun7i-a20-bananapi.dts                |  78 ++++++-
- arch/arm/dts/sun7i-a20-cubieboard2.dts             |  23 ++
- arch/arm/dts/sun7i-a20-cubietruck.dts              |   4 +
- arch/arm/dts/sun7i-a20-icnova-swac.dts             | 169 ++++++++++++++
- arch/arm/dts/sun7i-a20-itead-ibox.dts              | 125 +++++++++++
- arch/arm/dts/sun7i-a20-lamobo-r1.dts               |  10 -
- arch/arm/dts/sun7i-a20-mk808c.dts                  |  39 ++++
- arch/arm/dts/sun7i-a20-olimex-som-evb.dts          |  95 ++++++--
- arch/arm/dts/sun7i-a20-olinuxino-lime.dts          |  12 +
- arch/arm/dts/sun7i-a20-olinuxino-lime2.dts         |  47 ++++
- arch/arm/dts/sun7i-a20-olinuxino-micro.dts         |   6 +
- arch/arm/dts/sun7i-a20-orangepi-mini.dts           |  33 +++
- arch/arm/dts/sun7i-a20-orangepi.dts                |  29 +++
- arch/arm/dts/sun7i-a20-pcduino3-nano.dts           |  69 +++++-
- arch/arm/dts/sun7i-a20-pcduino3.dts                |  58 ++++-
- arch/arm/dts/sun7i-a20-wexler-tab7200.dts          |  90 +++++++-
- arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts        | 187 +++++++++++++++-
- arch/arm/dts/sun7i-a20.dtsi                        | 113 +++++++++-
- arch/arm/dts/sun8i-a23-a33.dtsi                    |  71 ++++--
- arch/arm/dts/sun8i-a23-gt90h-v4.dts                | 120 +++++++++-
- arch/arm/dts/sun8i-a23.dtsi                        |  25 +++
- arch/arm/dts/sun8i-a33-sinlinx-sina33.dts          |  83 ++++++-
- arch/arm/dts/sun8i-a33.dtsi                        |  45 ++++
- arch/arm/dts/sun8i-a83t-cubietruck-plus.dts        |  65 ++++++
- arch/arm/dts/sun8i-a83t.dtsi                       | 125 +++++------
- arch/arm/dts/sun8i-h3-orangepi-pc.dts              |  69 ++++++
- arch/arm/dts/sun8i-h3-orangepi-plus.dts            |  63 ++++++
- arch/arm/dts/sun8i-h3.dtsi                         | 189 +++++++++++-----
- arch/arm/dts/sun8i-q8-common.dtsi                  |  96 +++++++-
- arch/arm/dts/sun9i-a80-cubieboard4.dts             |  36 +++
- arch/arm/dts/sun9i-a80-optimus.dts                 |  48 ++--
- arch/arm/dts/sun9i-a80.dtsi                        | 204 +++++++++++++++--
- arch/arm/dts/sunxi-itead-core-common.dtsi          | 136 ++++++++++++
- arch/arm/dts/sunxi-q8-common.dtsi                  |   6 +
- 67 files changed, 4351 insertions(+), 497 deletions(-)
- create mode 100644 arch/arm/dts/axp22x.dtsi
- create mode 100644 arch/arm/dts/sun4i-a10-pcduino2.dts
- create mode 100644 arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
- create mode 100644 arch/arm/dts/sun6i-a31s-sina31s.dts
- create mode 100644 arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
- create mode 100644 arch/arm/dts/sun7i-a20-icnova-swac.dts
- create mode 100644 arch/arm/dts/sun7i-a20-itead-ibox.dts
- create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
- create mode 100644 arch/arm/dts/sunxi-itead-core-common.dtsi
-
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -126,6 +126,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
- 	sun4i-a10-mk802ii.dtb \
- 	sun4i-a10-olinuxino-lime.dtb \
- 	sun4i-a10-pcduino.dtb \
-+	sun4i-a10-pcduino2.dtb \
- 	sun4i-a10-pov-protab2-ips9.dtb
- dtb-$(CONFIG_MACH_SUN5I) += \
- 	sun5i-a10s-auxtek-t003.dtb \
-@@ -155,7 +156,9 @@ dtb-$(CONFIG_MACH_SUN6I) += \
- 	sun6i-a31-pangolin.dtb \
- 	sun6i-a31s-cs908.dtb \
- 	sun6i-a31s-primo81.dtb \
--	sun6i-a31s-sinovoip-bpi-m2.dtb
-+	sun6i-a31s-sina31s.dtb \
-+	sun6i-a31s-sinovoip-bpi-m2.dtb \
-+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
- dtb-$(CONFIG_MACH_SUN7I) += \
- 	sun7i-a20-ainol-aw1.dtb \
- 	sun7i-a20-bananapi.dtb \
-@@ -164,6 +167,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
- 	sun7i-a20-cubietruck.dtb \
- 	sun7i-a20-hummingbird.dtb \
- 	sun7i-a20-i12-tvbox.dtb \
-+	sun7i-a20-icnova-swac.dtb \
-+	sun7i-a20-itead-ibox.dtb \
- 	sun7i-a20-lamobo-r1.dtb \
- 	sun7i-a20-m3.dtb \
- 	sun7i-a20-m5.dtb \
-@@ -190,6 +195,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
- 	sun8i-a33-sinlinx-sina33.dtb
- dtb-$(CONFIG_MACH_SUN8I_A83T) += \
- 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-+	sun8i-a83t-cubietruck-plus.dtb \
- 	sun8i-a83t-sinovoip-bpi-m3.dtb
- dtb-$(CONFIG_MACH_SUN8I_H3) += \
- 	sun8i-h3-orangepi-pc.dtb \
---- /dev/null
-+++ b/arch/arm/dts/axp22x.dtsi
-@@ -0,0 +1,145 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai
-+ *
-+ * Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/*
-+ * AXP221/221s/223 Integrated Power Management Chip
-+ * http://www.x-powers.com/product/AXP22X.php
-+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
-+ */
-+
-+&axp22x {
-+	interrupt-controller;
-+	#interrupt-cells = <1>;
-+
-+	regulators {
-+		/* Default work frequency for buck regulators */
-+		x-powers,dcdc-freq = <3000>;
-+
-+		reg_dcdc1: dcdc1 {
-+			regulator-name = "dcdc1";
-+		};
-+
-+		reg_dcdc2: dcdc2 {
-+			regulator-name = "dcdc2";
-+		};
-+
-+		reg_dcdc3: dcdc3 {
-+			regulator-name = "dcdc3";
-+		};
-+
-+		reg_dcdc4: dcdc4 {
-+			regulator-name = "dcdc4";
-+		};
-+
-+		reg_dcdc5: dcdc5 {
-+			regulator-name = "dcdc5";
-+		};
-+
-+		reg_dc1sw: dc1sw {
-+			regulator-name = "dc1sw";
-+		};
-+
-+		reg_dc5ldo: dc5ldo {
-+			regulator-name = "dc5ldo";
-+		};
-+
-+		reg_aldo1: aldo1 {
-+			regulator-name = "aldo1";
-+		};
-+
-+		reg_aldo2: aldo2 {
-+			regulator-name = "aldo2";
-+		};
-+
-+		reg_aldo3: aldo3 {
-+			regulator-name = "aldo3";
-+		};
-+
-+		reg_dldo1: dldo1 {
-+			regulator-name = "dldo1";
-+		};
-+
-+		reg_dldo2: dldo2 {
-+			regulator-name = "dldo2";
-+		};
-+
-+		reg_dldo3: dldo3 {
-+			regulator-name = "dldo3";
-+		};
-+
-+		reg_dldo4: dldo4 {
-+			regulator-name = "dldo4";
-+		};
-+
-+		reg_eldo1: eldo1 {
-+			regulator-name = "eldo1";
-+		};
-+
-+		reg_eldo2: eldo2 {
-+			regulator-name = "eldo2";
-+		};
-+
-+		reg_eldo3: eldo3 {
-+			regulator-name = "eldo3";
-+		};
-+
-+		reg_ldo_io0: ldo_io0 {
-+			regulator-name = "ldo_io0";
-+			status = "disabled";
-+		};
-+
-+		reg_ldo_io1: ldo_io1 {
-+			regulator-name = "ldo_io1";
-+			status = "disabled";
-+		};
-+
-+		reg_rtc_ldo: rtc_ldo {
-+			/* RTC_LDO is a fixed, always-on regulator */
-+			regulator-always-on;
-+			regulator-min-microvolt = <3000000>;
-+			regulator-max-microvolt = <3000000>;
-+			regulator-name = "rtc_ldo";
-+		};
-+	};
-+};
---- a/arch/arm/dts/sun4i-a10-a1000.dts
-+++ b/arch/arm/dts/sun4i-a10-a1000.dts
-@@ -93,6 +93,10 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
---- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
-+++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
-@@ -45,6 +45,7 @@
- #include "sunxi-common-regulators.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
- 
- / {
- 	model = "Chuwi V7 CW0825";
-@@ -78,6 +79,27 @@
- 	};
- };
- 
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+};
-+
-+&i2c2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c2_pins_a>;
-+	status = "okay";
-+
-+	ft5306de4: touchscreen@38 {
-+		compatible = "edt,edt-ft5406";
-+		reg = <0x38>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-+		touchscreen-size-x = <1024>;
-+		touchscreen-size-y = <768>;
-+	};
-+};
-+
- &lradc {
- 	vref-supply = <&reg_vcc3v0>;
- 	status = "okay";
---- a/arch/arm/dts/sun4i-a10-cubieboard.dts
-+++ b/arch/arm/dts/sun4i-a10-cubieboard.dts
-@@ -83,6 +83,10 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&reg_dcdc2>;
- };
---- a/arch/arm/dts/sun4i-a10-gemei-g9.dts
-+++ b/arch/arm/dts/sun4i-a10-gemei-g9.dts
-@@ -47,6 +47,7 @@
- #include "sunxi-common-regulators.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
- 
- / {
- 	model = "Gemei G9 Tablet";
-@@ -64,12 +65,22 @@
- /*
-  * TODO:
-  *   2x cameras via CSI
-- *   bma250 IRQs
-  *   AXP battery management
-  *   NAND
-  *   OTG
-  *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
-  */
-+&codec {
-+	/* PH15 controls power to external amplifier (ft2012q) */
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&codec_pa_pin>;
-+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
- 
- &ehci0 {
- 	status = "okay";
-@@ -85,15 +96,13 @@
- 	status = "okay";
- 
- 	axp209: pmic@34 {
--		compatible = "x-powers,axp209";
- 		reg = <0x34>;
- 		interrupts = <0>;
--
--		interrupt-controller;
--		#interrupt-cells = <1>;
- 	};
- };
- 
-+#include "axp209.dtsi"
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins_a>;
-@@ -103,17 +112,13 @@
- 	bma250@18 {
- 		compatible = "bosch,bma250";
- 		reg = <0x18>;
--
--		/*
--		 * TODO: interrupt pins:
--		 * int1 - PH00
--		 * int2 - PI10
--		 */
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
- 	};
- };
- 
- &lradc {
--	vref-supply = <&reg_vcc3v0>;
-+	vref-supply = <&reg_ldo2>;
- 
- 	status = "okay";
- 
-@@ -149,6 +154,40 @@
- 	status = "okay";
- };
- 
-+&pio {
-+	codec_pa_pin: codec_pa_pin@0 {
-+		allwinner,pins = "PH15";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1250000>;
-+	regulator-max-microvolt = <1250000>;
-+	regulator-name = "vdd-int-dll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
-+};
-+
- &reg_usb1_vbus {
- 	status = "okay";
- };
---- a/arch/arm/dts/sun4i-a10-inet1.dts
-+++ b/arch/arm/dts/sun4i-a10-inet1.dts
-@@ -47,6 +47,7 @@
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/pwm/pwm.h>
- 
- / {
- 	model = "iNet-1";
-@@ -56,11 +57,25 @@
- 		serial0 = &uart0;
- 	};
- 
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bl_en_pin_inet>;
-+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+		default-brightness-level = <8>;
-+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&reg_dcdc2>;
- };
-@@ -104,6 +119,19 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c2_pins_a>;
- 	status = "okay";
-+
-+	ft5x: touchscreen@38 {
-+		compatible = "edt,edt-ft5406";
-+		reg = <0x38>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&touchscreen_wake_pin>;
-+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
-+		touchscreen-size-x = <600>;
-+		touchscreen-size-y = <1024>;
-+		touchscreen-swapped-x-y;
-+	};
- };
- 
- &lradc {
-@@ -151,6 +179,20 @@
- };
- 
- &pio {
-+	bl_en_pin_inet: bl_en_pin@0 {
-+		allwinner,pins = "PH7";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	touchscreen_wake_pin: touchscreen_wake_pin@0 {
-+		allwinner,pins = "PB13";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
- 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
- 		allwinner,pins = "PH4";
- 		allwinner,function = "gpio_in";
-@@ -166,6 +208,12 @@
- 	};
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_pins_a>;
-+	status = "okay";
-+};
-+
- &reg_dcdc2 {
- 	regulator-always-on;
- 	regulator-min-microvolt = <1000000>;
---- a/arch/arm/dts/sun4i-a10-inet97fv2.dts
-+++ b/arch/arm/dts/sun4i-a10-inet97fv2.dts
-@@ -47,6 +47,8 @@
- #include "sunxi-common-regulators.dtsi"
- 
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
- 
- / {
- 	model = "INet-97F Rev 02";
-@@ -61,8 +63,8 @@
- 	};
- };
- 
--&ehci0 {
--	status = "okay";
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
- };
- 
- &ehci1 {
-@@ -75,12 +77,71 @@
- 	status = "okay";
- 
- 	axp209: pmic@34 {
--		compatible = "x-powers,axp209";
- 		reg = <0x34>;
- 		interrupts = <0>;
-+	};
-+};
-+
-+#include "axp209.dtsi"
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+};
-+
-+&i2c2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c2_pins_a>;
-+	status = "okay";
-+
-+	ft5406ee8: touchscreen@38 {
-+		compatible = "edt,edt-ft5406";
-+		reg = <0x38>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-+		touchscreen-size-x = <800>;
-+		touchscreen-size-y = <480>;
-+	};
-+};
-+
-+&lradc {
-+	vref-supply = <&reg_ldo2>;
-+	status = "okay";
-+
-+	button@200 {
-+		label = "Menu";
-+		linux,code = <KEY_MENU>;
-+		channel = <0>;
-+		voltage = <200000>;
-+	};
-+
-+	button@600 {
-+		label = "Volume Up";
-+		linux,code = <KEY_VOLUMEUP>;
-+		channel = <0>;
-+		voltage = <600000>;
-+	};
- 
--		interrupt-controller;
--		#interrupt-cells = <1>;
-+	button@800 {
-+		label = "Volume Down";
-+		linux,code = <KEY_VOLUMEDOWN>;
-+		channel = <0>;
-+		voltage = <800000>;
-+	};
-+
-+	button@1000 {
-+		label = "Home";
-+		linux,code = <KEY_HOMEPAGE>;
-+		channel = <0>;
-+		voltage = <1000000>;
-+	};
-+
-+	button@1200 {
-+		label = "Esc";
-+		linux,code = <KEY_ESC>;
-+		channel = <0>;
-+		voltage = <1200000>;
- 	};
- };
- 
-@@ -94,15 +155,52 @@
- 	status = "okay";
- };
- 
--&ohci0 {
-+&otg_sram {
- 	status = "okay";
- };
- 
--&ohci1 {
--	status = "okay";
-+&pio {
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
-+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-+		allwinner,pins = "PH5";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-+	};
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
- };
- 
--&reg_usb1_vbus {
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1250000>;
-+	regulator-max-microvolt = <1250000>;
-+	regulator-name = "vdd-int-dll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_usb0_vbus {
- 	status = "okay";
- };
- 
-@@ -116,8 +214,17 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- &usbphy {
--	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
- };
---- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
-+++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
-@@ -59,6 +59,159 @@
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys-polled";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&key_pins_inet9f>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <20>;
-+
-+		button@0 {
-+			label = "Left Joystick Left";
-+			linux,code = <ABS_X>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <0xffffffff>; /* -1 */
-+			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
-+		};
-+
-+		button@1 {
-+			label = "Left Joystick Right";
-+			linux,code = <ABS_X>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <1>;
-+			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
-+		};
-+
-+		button@2 {
-+			label = "Left Joystick Up";
-+			linux,code = <ABS_Y>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <0xffffffff>; /* -1 */
-+			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
-+		};
-+
-+		button@3 {
-+			label = "Left Joystick Down";
-+			linux,code = <ABS_Y>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <1>;
-+			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
-+		};
-+
-+		button@4 {
-+			label = "Right Joystick Left";
-+			linux,code = <ABS_Z>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <0xffffffff>; /* -1 */
-+			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
-+		};
-+
-+		button@5 {
-+			label = "Right Joystick Right";
-+			linux,code = <ABS_Z>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <1>;
-+			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
-+		};
-+
-+		button@6 {
-+			label = "Right Joystick Up";
-+			linux,code = <ABS_RZ>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <0xffffffff>; /* -1 */
-+			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
-+		};
-+
-+		button@7 {
-+			label = "Right Joystick Down";
-+			linux,code = <ABS_RZ>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <1>;
-+			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
-+		};
-+
-+		button@8 {
-+			label = "DPad Left";
-+			linux,code = <ABS_HAT0X>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <0xffffffff>; /* -1 */
-+			gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
-+		};
-+
-+		button@9 {
-+			label = "DPad Right";
-+			linux,code = <ABS_HAT0X>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <1>;
-+			gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
-+		};
-+
-+		button@10 {
-+			label = "DPad Up";
-+			linux,code = <ABS_HAT0Y>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <0xffffffff>; /* -1 */
-+			gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
-+		};
-+
-+		button@11 {
-+			label = "DPad Down";
-+			linux,code = <ABS_HAT0Y>;
-+			linux,input-type = <EV_ABS>;
-+			linux,input-value = <1>;
-+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
-+		};
-+
-+		button@12 {
-+			label = "Button X";
-+			linux,code = <BTN_X>;
-+			gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
-+		};
-+
-+		button@13 {
-+			label = "Button Y";
-+			linux,code = <BTN_Y>;
-+			gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
-+		};
-+
-+		button@14 {
-+			label = "Button A";
-+			linux,code = <BTN_A>;
-+			gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
-+		};
-+
-+		button@15 {
-+			label = "Button B";
-+			linux,code = <BTN_B>;
-+			gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
-+		};
-+
-+		button@16 {
-+			label = "Select Button";
-+			linux,code = <BTN_SELECT>;
-+			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
-+		};
-+
-+		button@17 {
-+			label = "Start Button";
-+			linux,code = <BTN_START>;
-+			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
-+		};
-+
-+		button@18 {
-+			label = "Top Left Button";
-+			linux,code = <BTN_TL>;
-+			gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
-+		};
-+
-+		button@19 {
-+			label = "Top Right Button";
-+			linux,code = <BTN_TR>;
-+			gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
-+		};
-+	};
- };
- 
- &cpu0 {
-@@ -86,12 +239,29 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins_a>;
- 	status = "okay";
-+
-+	/* Accelerometer */
-+	bma250@18 {
-+		compatible = "bosch,bma250";
-+		reg = <0x18>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
-+	};
- };
- 
- &i2c2 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c2_pins_a>;
- 	status = "okay";
-+
-+	ft5406ee8: touchscreen@38 {
-+		compatible = "edt,edt-ft5406";
-+		reg = <0x38>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-+		touchscreen-size-x = <800>;
-+		touchscreen-size-y = <480>;
-+	};
- };
- 
- &lradc {
-@@ -149,6 +319,17 @@
- };
- 
- &pio {
-+	key_pins_inet9f: key_pins@0 {
-+		allwinner,pins = "PA0", "PA1", "PA3", "PA4",
-+				 "PA5", "PA6", "PA8", "PA9",
-+				 "PA11", "PA12", "PA13",
-+				 "PA14", "PA15", "PA16", "PA17",
-+				 "PH22", "PH23", "PH24", "PH25", "PH26";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
- 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
- 		allwinner,pins = "PH4";
- 		allwinner,function = "gpio_in";
---- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
-+++ b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
-@@ -1,5 +1,6 @@
- /*
-  * Copyright 2015 Josef Gajdusek <atx@atx.name>
-+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
-  *
-  * This file is dual-licensed: you can use it either under the terms
-  * of the GPL or the X11 license, at your option. Note that this dual
-@@ -42,22 +43,11 @@
- 
- /dts-v1/;
- #include "sun4i-a10.dtsi"
--#include "sunxi-common-regulators.dtsi"
--
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include "sunxi-itead-core-common.dtsi"
- 
- / {
- 	model = "Iteaduino Plus A10";
- 	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
--
--	aliases {
--		serial0 = &uart0;
--	};
--
--	chosen {
--		stdout-path = "serial0:115200n8";
--	};
- };
- 
- &ahci {
-@@ -65,18 +55,6 @@
- 	status = "okay";
- };
- 
--&cpu0 {
--	cpu-supply = <&reg_dcdc2>;
--};
--
--&ehci0 {
--	status = "okay";
--};
--
--&ehci1 {
--	status = "okay";
--};
--
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&emac_pins_a>;
-@@ -89,12 +67,7 @@
- };
- 
- &i2c0 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&i2c0_pins_a>;
--	status = "okay";
--
- 	axp209: pmic@34 {
--		reg = <0x34>;
- 		interrupts = <0>;
- 	};
- };
-@@ -135,68 +108,13 @@
- 	status = "okay";
- };
- 
--&ohci0 {
--	status = "okay";
--};
--
--&ohci1 {
--	status = "okay";
--};
--
- &reg_ahci_5v {
- 	status = "okay";
- };
- 
--#include "axp209.dtsi"
--
--&reg_dcdc2 {
--	regulator-always-on;
--	regulator-min-microvolt = <1000000>;
--	regulator-max-microvolt = <1450000>;
--	regulator-name = "vdd-cpu";
--};
--
--&reg_dcdc3 {
--	regulator-always-on;
--	regulator-min-microvolt = <1000000>;
--	regulator-max-microvolt = <1400000>;
--	regulator-name = "vdd-int-dll";
--};
--
--&reg_ldo1 {
--	regulator-name = "vdd-rtc";
--};
--
--&reg_ldo2 {
--	regulator-always-on;
--	regulator-min-microvolt = <3000000>;
--	regulator-max-microvolt = <3000000>;
--	regulator-name = "avcc";
--};
--
--&reg_usb1_vbus {
--	status = "okay";
--};
--
--&reg_usb2_vbus {
--	status = "okay";
--};
--
- &spi0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&spi0_pins_a>,
- 		    <&spi0_cs0_pins_a>;
- 	status = "okay";
- };
--
--&uart0 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
--	status = "okay";
--};
--
--&usbphy {
--	usb1_vbus-supply = <&reg_usb1_vbus>;
--	usb2_vbus-supply = <&reg_usb2_vbus>;
--	status = "okay";
--};
---- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts
-+++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
-@@ -156,6 +156,10 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
- 	emac_power_pin_q5: emac_power_pin@0 {
- 		allwinner,pins = "PH19";
-@@ -172,6 +176,11 @@
- 	};
- };
- 
-+&reg_usb0_vbus {
-+	regulator-boot-on;
-+	status = "okay";
-+};
-+
- &reg_usb1_vbus {
- 	status = "okay";
- };
-@@ -186,7 +195,13 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
- &usbphy {
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun4i-a10-marsboard.dts
-+++ b/arch/arm/dts/sun4i-a10-marsboard.dts
-@@ -91,6 +91,10 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -154,6 +158,10 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
- 	led_pins_marsboard: led_pins@0 {
- 		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
-@@ -161,6 +169,13 @@
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
-+
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
- };
- 
- &reg_usb1_vbus {
-@@ -184,7 +199,15 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun4i-a10-mk802.dts
-+++ b/arch/arm/dts/sun4i-a10-mk802.dts
-@@ -44,6 +44,7 @@
- #include "sun4i-a10.dtsi"
- #include "sunxi-common-regulators.dtsi"
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
- 
- / {
- 	model = "MK802";
-@@ -58,6 +59,10 @@
- 	};
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -80,7 +85,25 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-+		allwinner,pins = "PH5";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
- 	usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
- 		allwinner,pins = "PH12";
- 		allwinner,function = "gpio_out";
-@@ -89,6 +112,10 @@
- 	};
- };
- 
-+&reg_usb0_vbus {
-+	status = "okay";
-+};
-+
- &reg_usb1_vbus {
- 	status = "okay";
- };
-@@ -105,7 +132,17 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
-+++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
-@@ -124,6 +124,18 @@
- 	};
- };
- 
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+
-+	eeprom: eeprom@50 {
-+		compatible = "atmel,24c16";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
-+};
-+
- &mdio {
- 	status = "okay";
- 
---- a/arch/arm/dts/sun4i-a10-pcduino.dts
-+++ b/arch/arm/dts/sun4i-a10-pcduino.dts
-@@ -104,6 +104,10 @@
- 	};
- };
- 
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -129,12 +133,8 @@
- 	status = "okay";
- 
- 	axp209: pmic@34 {
--		compatible = "x-powers,axp209";
- 		reg = <0x34>;
- 		interrupts = <0>;
--
--		interrupt-controller;
--		#interrupt-cells = <1>;
- 	};
- };
- 
-@@ -164,6 +164,10 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
- 	led_pins_pcduino: led_pins@0 {
- 		allwinner,pins = "PH15", "PH16";
-@@ -178,14 +182,40 @@
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
-+
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
- };
- 
--&reg_usb1_vbus {
--	status = "okay";
-+#include "axp209.dtsi"
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
- };
- 
--&reg_usb2_vbus {
--	status = "okay";
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-int-dll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
- };
- 
- &uart0 {
-@@ -194,8 +224,16 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- &usbphy {
--	usb1_vbus-supply = <&reg_usb1_vbus>;
--	usb2_vbus-supply = <&reg_usb2_vbus>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
-+	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
- 	status = "okay";
- };
---- /dev/null
-+++ b/arch/arm/dts/sun4i-a10-pcduino2.dts
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/*
-+ * The LinkSprite pcDuino2 board is almost identical to the older
-+ * LinkSprite pcDuino1 board. The only software visible difference
-+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
-+ * is controlled by the PD2 pin (pulled-up by default). Also one of
-+ * the USB host ports has been replaced with a USB WIFI chip.
-+ */
-+
-+#include "sun4i-a10-pcduino.dts"
-+
-+/ {
-+	model = "LinkSprite pcDuino2";
-+	compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
-+};
-+
-+&pio {
-+	usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
-+		allwinner,pins = "PD2";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
-+&reg_usb2_vbus {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
-+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
-+	usb2_vbus-supply = <&reg_usb2_vbus>;
-+	status = "okay";
-+};
---- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
-+++ b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
-@@ -47,6 +47,7 @@
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/pwm/pwm.h>
- 
- / {
- 	model = "Point of View Protab2-IPS9";
-@@ -56,11 +57,28 @@
- 		serial0 = &uart0;
- 	};
- 
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bl_en_pin_protab>;
-+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+		default-brightness-level = <8>;
-+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
- };
- 
-+&codec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&codec_pa_pin>;
-+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&reg_dcdc2>;
- };
-@@ -86,12 +104,36 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins_a>;
- 	status = "okay";
-+
-+	/* Accelerometer */
-+	bma250@18 {
-+		compatible = "bosch,bma250";
-+		reg = <0x18>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
-+	};
- };
- 
- &i2c2 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c2_pins_a>;
- 	status = "okay";
-+
-+	pixcir_ts@5c {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&touchscreen_pins>;
-+		compatible = "pixcir,pixcir_tangoc";
-+		reg = <0x5c>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
-+		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
-+		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
-+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
-+		touchscreen-size-x = <1024>;
-+		touchscreen-size-y = <768>;
-+		touchscreen-inverted-x;
-+		touchscreen-inverted-y;
-+	};
- };
- 
- &lradc {
-@@ -128,6 +170,27 @@
- };
- 
- &pio {
-+	bl_en_pin_protab: bl_en_pin@0 {
-+		allwinner,pins = "PH7";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	codec_pa_pin: codec_pa_pin@0 {
-+		allwinner,pins = "PH15";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	touchscreen_pins: touchscreen_pins@0 {
-+		allwinner,pins = "PA5", "PB13";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
- 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
- 		allwinner,pins = "PH4";
- 		allwinner,function = "gpio_in";
-@@ -143,6 +206,12 @@
- 	};
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_pins_a>;
-+	status = "okay";
-+};
-+
- &reg_dcdc2 {
- 	regulator-always-on;
- 	regulator-min-microvolt = <1000000>;
---- a/arch/arm/dts/sun4i-a10.dtsi
-+++ b/arch/arm/dts/sun4i-a10.dtsi
-@@ -45,6 +45,7 @@
- 
- #include <dt-bindings/thermal/thermal.h>
- 
-+#include <dt-bindings/clock/sun4i-a10-pll2.h>
- #include <dt-bindings/dma/sun4i-a10.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
- 
-@@ -65,7 +66,7 @@
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_be0-lcd0-hdmi";
- 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
--				 <&ahb_gates 44>;
-+				 <&ahb_gates 44>, <&dram_gates 26>;
- 			status = "disabled";
- 		};
- 
-@@ -74,7 +75,8 @@
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
--				 <&ahb_gates 44>, <&ahb_gates 46>;
-+				 <&ahb_gates 44>, <&ahb_gates 46>,
-+				 <&dram_gates 25>, <&dram_gates 26>;
- 			status = "disabled";
- 		};
- 
-@@ -83,7 +85,8 @@
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
- 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
--				 <&ahb_gates 46>;
-+				 <&ahb_gates 46>, <&dram_gates 25>,
-+				 <&dram_gates 26>;
- 			status = "disabled";
- 		};
- 
-@@ -92,7 +95,8 @@
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- 			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
--				 <&ahb_gates 44>, <&ahb_gates 46>;
-+				 <&ahb_gates 44>, <&ahb_gates 46>,
-+				 <&dram_gates 25>, <&dram_gates 26>;
- 			status = "disabled";
- 		};
- 	};
-@@ -195,6 +199,15 @@
- 			clock-output-names = "pll1";
- 		};
- 
-+		pll2: clk@01c20008 {
-+			#clock-cells = <1>;
-+			compatible = "allwinner,sun4i-a10-pll2-clk";
-+			reg = <0x01c20008 0x8>;
-+			clocks = <&osc24M>;
-+			clock-output-names = "pll2-1x", "pll2-2x",
-+					     "pll2-4x", "pll2-8x";
-+		};
-+
- 		pll4: clk@01c20018 {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun4i-a10-pll1-clk";
-@@ -241,6 +254,7 @@
- 			compatible = "allwinner,sun4i-a10-axi-gates-clk";
- 			reg = <0x01c2005c 0x4>;
- 			clocks = <&axi>;
-+			clock-indices = <0>;
- 			clock-output-names = "axi_dram";
- 		};
- 
-@@ -257,17 +271,36 @@
- 			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
- 			reg = <0x01c20060 0x8>;
- 			clocks = <&ahb>;
-+			clock-indices = <0>, <1>,
-+					<2>, <3>,
-+					<4>, <5>, <6>,
-+					<7>, <8>, <9>,
-+					<10>, <11>, <12>,
-+					<13>, <14>, <16>,
-+					<17>, <18>, <20>,
-+					<21>, <22>, <23>,
-+					<24>, <25>, <26>,
-+					<32>, <33>, <34>,
-+					<35>, <36>, <37>,
-+					<40>, <41>, <43>,
-+					<44>, <45>,
-+					<46>, <47>,
-+					<50>, <52>;
- 			clock-output-names = "ahb_usb0", "ahb_ehci0",
--				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
--				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
--				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
--				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
--				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
--				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
--				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
--				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
--				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
--				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
-+					     "ahb_ohci0", "ahb_ehci1",
-+					     "ahb_ohci1", "ahb_ss", "ahb_dma",
-+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-+					     "ahb_mmc2", "ahb_mmc3", "ahb_ms",
-+					     "ahb_nand", "ahb_sdram", "ahb_ace",
-+					     "ahb_emac", "ahb_ts", "ahb_spi0",
-+					     "ahb_spi1", "ahb_spi2", "ahb_spi3",
-+					     "ahb_pata", "ahb_sata", "ahb_gps",
-+					     "ahb_ve", "ahb_tvd", "ahb_tve0",
-+					     "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
-+					     "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-+					     "ahb_de_be0", "ahb_de_be1",
-+					     "ahb_de_fe0", "ahb_de_fe1",
-+					     "ahb_mp", "ahb_mali400";
- 		};
- 
- 		apb0: apb0@01c20054 {
-@@ -283,9 +316,14 @@
- 			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
- 			reg = <0x01c20068 0x4>;
- 			clocks = <&apb0>;
-+			clock-indices = <0>, <1>,
-+					<2>, <3>,
-+					<5>, <6>,
-+					<7>, <10>;
- 			clock-output-names = "apb0_codec", "apb0_spdif",
--				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
--				"apb0_ir1", "apb0_keypad";
-+					     "apb0_ac97", "apb0_iis",
-+					     "apb0_pio", "apb0_ir0",
-+					     "apb0_ir1", "apb0_keypad";
- 		};
- 
- 		apb1: clk@01c20058 {
-@@ -301,12 +339,22 @@
- 			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
- 			reg = <0x01c2006c 0x4>;
- 			clocks = <&apb1>;
-+			clock-indices = <0>, <1>,
-+					<2>, <4>,
-+					<5>, <6>,
-+					<7>, <16>,
-+					<17>, <18>,
-+					<19>, <20>,
-+					<21>, <22>,
-+					<23>;
- 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
--				"apb1_i2c2", "apb1_can", "apb1_scr",
--				"apb1_ps20", "apb1_ps21", "apb1_uart0",
--				"apb1_uart1", "apb1_uart2", "apb1_uart3",
--				"apb1_uart4", "apb1_uart5", "apb1_uart6",
--				"apb1_uart7";
-+					     "apb1_i2c2", "apb1_can",
-+					     "apb1_scr", "apb1_ps20",
-+					     "apb1_ps21", "apb1_uart0",
-+					     "apb1_uart1", "apb1_uart2",
-+					     "apb1_uart3", "apb1_uart4",
-+					     "apb1_uart5", "apb1_uart6",
-+					     "apb1_uart7";
- 		};
- 
- 		nand_clk: clk@01c20080 {
-@@ -446,6 +494,48 @@
- 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- 			clock-output-names = "spi3";
- 		};
-+
-+		dram_gates: clk@01c20100 {
-+			#clock-cells = <1>;
-+			compatible = "allwinner,sun4i-a10-dram-gates-clk";
-+			reg = <0x01c20100 0x4>;
-+			clocks = <&pll5 0>;
-+			clock-indices = <0>,
-+					<1>, <2>,
-+					<3>,
-+					<4>,
-+					<5>, <6>,
-+					<15>,
-+					<24>, <25>,
-+					<26>, <27>,
-+					<28>, <29>;
-+			clock-output-names = "dram_ve",
-+					     "dram_csi0", "dram_csi1",
-+					     "dram_ts",
-+					     "dram_tvd",
-+					     "dram_tve0", "dram_tve1",
-+					     "dram_output",
-+					     "dram_de_fe1", "dram_de_fe0",
-+					     "dram_de_be0", "dram_de_be1",
-+					     "dram_de_mp", "dram_ace";
-+		};
-+
-+		ve_clk: clk@01c2013c {
-+			#clock-cells = <0>;
-+			#reset-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-ve-clk";
-+			reg = <0x01c2013c 0x4>;
-+			clocks = <&pll4>;
-+			clock-output-names = "ve";
-+		};
-+
-+		codec_clk: clk@01c20140 {
-+			#clock-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-codec-clk";
-+			reg = <0x01c20140 0x4>;
-+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
-+			clock-output-names = "codec";
-+		};
- 	};
- 
- 	soc@01c00000 {
-@@ -656,6 +746,14 @@
- 			status = "disabled";
- 		};
- 
-+		crypto: crypto-engine@01c15000 {
-+			compatible = "allwinner,sun4i-a10-crypto";
-+			reg = <0x01c15000 0x1000>;
-+			interrupts = <86>;
-+			clocks = <&ahb_gates 5>, <&ss_clk>;
-+			clock-names = "ahb", "mod";
-+		};
-+
- 		spi2: spi@01c17000 {
- 			compatible = "allwinner,sun4i-a10-spi";
- 			reg = <0x01c17000 0x1000>;
-@@ -961,6 +1059,19 @@
- 			status = "disabled";
- 		};
- 
-+		codec: codec@01c22c00 {
-+			#sound-dai-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-codec";
-+			reg = <0x01c22c00 0x40>;
-+			interrupts = <30>;
-+			clocks = <&apb0_gates 0>, <&codec_clk>;
-+			clock-names = "apb", "codec";
-+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
-+			       <&dma SUN4I_DMA_NORMAL 19>;
-+			dma-names = "rx", "tx";
-+			status = "disabled";
-+		};
-+
- 		sid: eeprom@01c23800 {
- 			compatible = "allwinner,sun4i-a10-sid";
- 			reg = <0x01c23800 0x10>;
---- a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
-+++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
-@@ -86,6 +86,20 @@
- 	status = "okay";
- };
- 
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins_a>;
-+	status = "okay";
-+
-+	axp152: pmic@30 {
-+		compatible = "x-powers,axp152";
-+		reg = <0x30>;
-+		interrupts = <0>;
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
---- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
-+++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
-@@ -111,7 +111,7 @@
- 	status = "okay";
- 
- 	at24@50 {
--		compatible = "at,24c16";
-+		compatible = "atmel,24c16";
- 		pagesize = <16>;
- 		reg = <0x50>;
- 		read-only;
---- a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
-+++ b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
-@@ -123,7 +123,7 @@
- 
- &mmc0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
-+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
- 	vmmc-supply = <&reg_vcc3v3>;
- 	bus-width = <4>;
- 	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-@@ -131,27 +131,12 @@
- 	status = "okay";
- };
- 
--&mmc2 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&mmc2_pins_a>;
--	vmmc-supply = <&reg_vcc3v3>;
--	bus-width = <8>;
--	non-removable;
--	status = "okay";
--
--	mmccard: mmccard@0 {
--		reg = <0>;
--		compatible = "mmc-card";
--		broken-hpi;
--	};
--};
--
- &otg_sram {
- 	status = "okay";
- };
- 
- &pio {
--	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
-+	mmc0_cd_pin_d709: mmc0_cd_pin@0 {
- 		allwinner,pins = "PG0";
- 		allwinner,function = "gpio_in";
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
---- a/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
-+++ b/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
-@@ -123,21 +123,6 @@
- 	status = "okay";
- };
- 
--&mmc2 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&mmc2_pins_a>;
--	vmmc-supply = <&reg_vcc3v3>;
--	bus-width = <8>;
--	non-removable;
--	status = "okay";
--
--	mmccard: mmccard@0 {
--		reg = <0>;
--		compatible = "mmc-card";
--		broken-hpi;
--	};
--};
--
- &otg_sram {
- 	status = "okay";
- };
-@@ -201,11 +186,6 @@
- 	status = "okay";
- };
- 
--&reg_usb1_vbus {
--	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
--	status = "okay";
--};
--
- &uart1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart1_pins_b>;
-@@ -221,16 +201,12 @@
- 	allwinner,pins = "PG12";
- };
- 
--&usb1_vbus_pin_a {
--	allwinner,pins = "PG11";
--};
--
- &usbphy {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- 	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- 	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- 	usb0_vbus-supply = <&reg_usb0_vbus>;
--	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	usb1_vbus-supply = <&reg_ldo3>;
- 	status = "okay";
- };
---- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
-+++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
-@@ -47,11 +47,21 @@
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/pwm/pwm.h>
- 
- / {
- 	model = "Utoo P66";
- 	compatible = "utoo,p66", "allwinner,sun5i-a13";
- 
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		/* Note levels of 10 / 20% result in backlight off */
-+		brightness-levels = <0 30 40 50 60 70 80 90 100>;
-+		default-brightness-level = <6>;
-+		/* TODO: backlight uses axp gpio1 as enable pin */
-+	};
-+
- 	i2c_lcd: i2c@0 {
- 		/* The lcd panel i2c interface is hooked up via gpios */
- 		compatible = "i2c-gpio";
-@@ -63,6 +73,13 @@
- 	};
- };
- 
-+&codec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&codec_pa_pin>;
-+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&reg_dcdc2>;
- };
-@@ -158,6 +175,13 @@
- };
- 
- &pio {
-+	codec_pa_pin: codec_pa_pin@0 {
-+		allwinner,pins = "PG3";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
- 	mmc0_cd_pin_p66: mmc0_cd_pin@0 {
- 		allwinner,pins = "PG0";
- 		allwinner,function = "gpio_in";
-@@ -201,6 +225,12 @@
- 	};
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_pins>;
-+	status = "okay";
-+};
-+
- &reg_dcdc2 {
- 	regulator-always-on;
- 	regulator-min-microvolt = <1000000>;
---- a/arch/arm/dts/sun5i-q8-common.dtsi
-+++ b/arch/arm/dts/sun5i-q8-common.dtsi
-@@ -41,11 +41,21 @@
-  */
- #include "sunxi-q8-common.dtsi"
- 
-+#include <dt-bindings/pwm/pwm.h>
-+
- / {
- 	aliases {
- 		serial0 = &uart1;
- 	};
- 
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+		default-brightness-level = <8>;
-+		/* TODO: backlight uses axp gpio1 as enable pin */
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
---- a/arch/arm/dts/sun5i-r8-chip.dts
-+++ b/arch/arm/dts/sun5i-r8-chip.dts
-@@ -64,6 +64,26 @@
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	wifi_reg_on: wifi_reg_on {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&chip_wifi_reg_on_pin>;
-+
-+		regulator-name = "wifi-reg-on";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&pio 2 19 GPIO_ACTIVE_HIGH>; /* PC19 */
-+		enable-active-high;
-+	};
-+};
-+
-+&codec {
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
- };
- 
- &ehci0 {
-@@ -109,10 +129,14 @@
- 	};
- };
- 
-+&mmc0_pins_a {
-+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>;
--	vmmc-supply = <&reg_vcc3v3>;
-+	vmmc-supply = <&wifi_reg_on>;
- 	bus-width = <4>;
- 	non-removable;
- 	status = "okay";
-@@ -134,6 +158,13 @@
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
- 
-+	chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
-+		allwinner,pins = "PC19";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
- 	chip_id_det_pin: chip_id_det_pin@0 {
- 		allwinner,pins = "PG2";
- 		allwinner,function = "gpio_in";
-@@ -167,6 +198,20 @@
- 	regulator-always-on;
- };
- 
-+&reg_ldo3 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vdd-wifi1";
-+	regulator-always-on;
-+};
-+
-+&reg_ldo4 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vdd-wifi2";
-+	regulator-always-on;
-+};
-+
- &reg_ldo5 {
- 	regulator-min-microvolt = <1800000>;
- 	regulator-max-microvolt = <1800000>;
---- a/arch/arm/dts/sun5i.dtsi
-+++ b/arch/arm/dts/sun5i.dtsi
-@@ -44,6 +44,7 @@
- 
- #include "skeleton.dtsi"
- 
-+#include <dt-bindings/clock/sun4i-a10-pll2.h>
- #include <dt-bindings/dma/sun4i-a10.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
- 
-@@ -102,6 +103,15 @@
- 			clock-output-names = "pll1";
- 		};
- 
-+		pll2: clk@01c20008 {
-+			#clock-cells = <1>;
-+			compatible = "allwinner,sun5i-a13-pll2-clk";
-+			reg = <0x01c20008 0x8>;
-+			clocks = <&osc24M>;
-+			clock-output-names = "pll2-1x", "pll2-2x",
-+					     "pll2-4x", "pll2-8x";
-+		};
-+
- 		pll4: clk@01c20018 {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun4i-a10-pll1-clk";
-@@ -285,6 +295,14 @@
- 			clock-output-names = "usb_ohci0", "usb_phy";
- 		};
- 
-+		codec_clk: clk@01c20140 {
-+			#clock-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-codec-clk";
-+			reg = <0x01c20140 0x4>;
-+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
-+			clock-output-names = "codec";
-+		};
-+
- 		mbus_clk: clk@01c2015c {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun5i-a13-mbus-clk";
-@@ -571,6 +589,19 @@
- 			status = "disabled";
- 		};
- 
-+		codec: codec@01c22c00 {
-+			#sound-dai-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-codec";
-+			reg = <0x01c22c00 0x40>;
-+			interrupts = <30>;
-+			clocks = <&apb0_gates 0>, <&codec_clk>;
-+			clock-names = "apb", "codec";
-+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
-+			       <&dma SUN4I_DMA_NORMAL 19>;
-+			dma-names = "rx", "tx";
-+			status = "disabled";
-+		};
-+
- 		sid: eeprom@01c23800 {
- 			compatible = "allwinner,sun4i-a10-sid";
- 			reg = <0x01c23800 0x10>;
---- a/arch/arm/dts/sun6i-a31-colombus.dts
-+++ b/arch/arm/dts/sun6i-a31-colombus.dts
-@@ -60,6 +60,16 @@
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	i2c_lcd: i2c@0 {
-+		/* The lcd panel i2c interface is hooked up via gpios */
-+		compatible = "i2c-gpio";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&i2c_lcd_pins>;
-+		gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
-+			<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
-+		i2c-gpio,delay-us = <5>;
-+	};
- };
- 
- &ehci1 {
-@@ -94,6 +104,13 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c2_pins_a>;
- 	status = "okay";
-+
-+	mma8452: mma8452@1d {
-+		compatible = "fsl,mma8452";
-+		reg = <0x1d>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
-+	};
- };
- 
- &mmc0 {
-@@ -124,6 +141,13 @@
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
-+
-+	i2c_lcd_pins: i2c_lcd_pin@0 {
-+		allwinner,pins = "PA23", "PA24";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
- };
- 
- &reg_usb2_vbus {
---- a/arch/arm/dts/sun6i-a31-hummingbird.dts
-+++ b/arch/arm/dts/sun6i-a31-hummingbird.dts
-@@ -54,6 +54,8 @@
- 	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
- 
- 	aliases {
-+		rtc0 = &pcf8563;
-+		rtc1 = &rtc;
- 		serial0 = &uart0;
- 	};
- 
-@@ -67,13 +69,17 @@
- 	};
- };
- 
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc3>;
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
- 
- &gmac {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&gmac_pins_rgmii_a>;
-+	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
- 	phy = <&phy1>;
- 	phy-mode = "rgmii";
- 	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
-@@ -119,7 +125,7 @@
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
--	vmmc-supply = <&vcc_3v0>;
-+	vmmc-supply = <&reg_dcdc1>;
- 	bus-width = <4>;
- 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- 	cd-inverted;
-@@ -134,7 +140,7 @@
- &mmc1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
--	vmmc-supply = <&vcc_wifi>;
-+	vmmc-supply = <&reg_aldo1>;
- 	mmc-pwrseq = <&wifi_pwrseq>;
- 	bus-width = <4>;
- 	non-removable;
-@@ -146,6 +152,13 @@
- };
- 
- &pio {
-+	gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
-+		allwinner,pins = "PA21";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
- 	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
- 		allwinner,pins = "PA8";
- 		allwinner,function = "gpio_in";
-@@ -164,70 +177,69 @@
- &p2wi {
- 	status = "okay";
- 
--	axp221: pmic@68 {
-+	axp22x: pmic@68 {
- 		compatible = "x-powers,axp221";
- 		reg = <0x68>;
- 		interrupt-parent = <&nmi_intc>;
- 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
--		interrupt-controller;
--		#interrupt-cells = <1>;
--		dcdc1-supply = <&vcc_3v0>;
--		dcdc5-supply = <&vcc_dram>;
--
--		regulators {
--			x-powers,dcdc-freq = <3000>;
--
--			vcc_3v0: dcdc1 {
--				regulator-always-on;
--				regulator-min-microvolt = <3000000>;
--				regulator-max-microvolt = <3000000>;
--				regulator-name = "vcc-3v0";
--			};
--
--			vdd_cpu: dcdc2 {
--				regulator-always-on;
--				regulator-min-microvolt = <700000>;
--				regulator-max-microvolt = <1320000>;
--				regulator-name = "vdd-cpu";
--			};
--
--			vdd_gpu: dcdc3 {
--				regulator-always-on;
--				regulator-min-microvolt = <700000>;
--				regulator-max-microvolt = <1320000>;
--				regulator-name = "vdd-gpu";
--			};
--
--			vdd_sys_dll: dcdc4 {
--				regulator-always-on;
--				regulator-min-microvolt = <1100000>;
--				regulator-max-microvolt = <1100000>;
--				regulator-name = "vdd-sys-dll";
--			};
--
--			vcc_dram: dcdc5 {
--				regulator-always-on;
--				regulator-min-microvolt = <1500000>;
--				regulator-max-microvolt = <1500000>;
--				regulator-name = "vcc-dram";
--			};
--
--			vcc_wifi: aldo1 {
--				regulator-min-microvolt = <3300000>;
--				regulator-max-microvolt = <3300000>;
--				regulator-name = "vcc_wifi";
--			};
--
--			avcc: aldo3 {
--				regulator-always-on;
--				regulator-min-microvolt = <3000000>;
--				regulator-max-microvolt = <3000000>;
--				regulator-name = "avcc";
--			};
--		};
- 	};
- };
- 
-+#include "axp22x.dtsi"
-+
-+&reg_aldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_dc5ldo {
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-3v0";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-gpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc4 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-sys-dll";
-+};
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
- &reg_usb1_vbus {
- 	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
- 	status = "okay";
---- a/arch/arm/dts/sun6i-a31.dtsi
-+++ b/arch/arm/dts/sun6i-a31.dtsi
-@@ -61,7 +61,7 @@
- 		#size-cells = <1>;
- 		ranges;
- 
--		framebuffer@0 {
-+		simplefb_hdmi: framebuffer@0 {
- 			compatible = "allwinner,simple-framebuffer",
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-@@ -69,7 +69,7 @@
- 			status = "disabled";
- 		};
- 
--		framebuffer@1 {
-+		simplefb_lcd: framebuffer@1 {
- 			compatible = "allwinner,simple-framebuffer",
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_be0-lcd0";
-@@ -252,6 +252,20 @@
- 			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
- 			reg = <0x01c20060 0x8>;
- 			clocks = <&ahb1>;
-+			clock-indices = <1>, <5>,
-+					<6>, <8>, <9>,
-+					<10>, <11>, <12>,
-+					<13>, <14>,
-+					<17>, <18>, <19>,
-+					<20>, <21>, <22>,
-+					<23>, <24>, <26>,
-+					<27>, <29>,
-+					<30>, <31>, <32>,
-+					<36>, <37>, <40>,
-+					<43>, <44>, <45>,
-+					<46>, <47>, <50>,
-+					<52>, <55>, <56>,
-+					<57>, <58>;
- 			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
- 					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
- 					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
-@@ -281,6 +295,9 @@
- 			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
- 			reg = <0x01c20068 0x4>;
- 			clocks = <&apb1>;
-+			clock-indices = <0>, <4>,
-+					<5>, <12>,
-+					<13>;
- 			clock-output-names = "apb1_codec", "apb1_digital_mic",
- 					"apb1_pio", "apb1_daudio0",
- 					"apb1_daudio1";
-@@ -299,6 +316,10 @@
- 			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
- 			reg = <0x01c2006c 0x4>;
- 			clocks = <&apb2>;
-+			clock-indices = <0>, <1>,
-+					<2>, <3>, <16>,
-+					<17>, <18>, <19>,
-+					<20>, <21>;
- 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
- 					     "apb2_i2c2", "apb2_i2c3",
- 					     "apb2_uart0", "apb2_uart1",
-@@ -346,6 +367,14 @@
- 					     "mmc3_sample";
- 		};
- 
-+		ss_clk: clk@01c2009c {
-+			#clock-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-mod0-clk";
-+			reg = <0x01c2009c 0x4>;
-+			clocks = <&osc24M>, <&pll6 0>;
-+			clock-output-names = "ss";
-+		};
-+
- 		spi0_clk: clk@01c200a0 {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun4i-a10-mod0-clk";
-@@ -384,6 +413,9 @@
- 			compatible = "allwinner,sun6i-a31-usb-clk";
- 			reg = <0x01c200cc 0x4>;
- 			clocks = <&osc24M>;
-+			clock-indices = <8>, <9>, <10>,
-+					<16>, <17>,
-+					<18>;
- 			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
- 					     "usb_ohci0", "usb_ohci1",
- 					     "usb_ohci2";
-@@ -684,6 +716,16 @@
- 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 			};
- 
-+			mmc3_8bit_emmc_pins: mmc3@1 {
-+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
-+						 "PC10", "PC11", "PC12",
-+						 "PC13", "PC14", "PC15",
-+						 "PC24";
-+				allwinner,function = "mmc3";
-+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+			};
-+
- 			gmac_pins_mii_a: gmac_mii@0 {
- 				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- 						"PA8", "PA9", "PA11",
-@@ -761,6 +803,13 @@
- 			reg = <0x01c20ca0 0x20>;
- 		};
- 
-+		lradc: lradc@01c22800 {
-+			compatible = "allwinner,sun4i-a10-lradc-keys";
-+			reg = <0x01c22800 0x100>;
-+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
- 		rtp: rtp@01c25000 {
- 			compatible = "allwinner,sun6i-a31-ts";
- 			reg = <0x01c25000 0x100>;
-@@ -907,6 +956,16 @@
- 			#size-cells = <0>;
- 		};
- 
-+		crypto: crypto-engine@01c15000 {
-+			compatible = "allwinner,sun4i-a10-crypto";
-+			reg = <0x01c15000 0x1000>;
-+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ahb1_gates 5>, <&ss_clk>;
-+			clock-names = "ahb", "mod";
-+			resets = <&ahb1_rst 5>;
-+			reset-names = "ahb";
-+		};
-+
- 		timer@01c60000 {
- 			compatible = "allwinner,sun6i-a31-hstimer",
- 				     "allwinner,sun7i-a20-hstimer";
-@@ -1068,7 +1127,7 @@
- 			resets = <&apb0_rst 0>;
- 			gpio-controller;
- 			interrupt-controller;
--			#interrupt-cells = <2>;
-+			#interrupt-cells = <3>;
- 			#size-cells = <0>;
- 			#gpio-cells = <3>;
- 
---- a/arch/arm/dts/sun6i-a31s-primo81.dts
-+++ b/arch/arm/dts/sun6i-a31s-primo81.dts
-@@ -1,16 +1,57 @@
- /*
-- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
-+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
-+ * Copyright 2015 Karsten Merker <merker@debian.org>
-+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
-  *
-- * Minimal dts file for the MSI Primo81 for u-boot only
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-  *
-- * SPDX-License-Identifier:     GPL-2.0+ or X11
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-  */
- 
- /dts-v1/;
- #include "sun6i-a31s.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
- 
- / {
--	model = "MSI Primo81";
-+	model = "MSI Primo81 tablet";
- 	compatible = "msi,primo81", "allwinner,sun6i-a31s";
- 
- 	aliases {
-@@ -22,8 +63,202 @@
- 	};
- };
- 
--&uart0 {
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc3>;
-+};
-+
-+&ehci0 {
-+	/* rtl8188etv wifi is connected here */
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	/* pull-ups and device VDDIO use AXP221 DLDO3 */
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins_a>;
-+	status = "failed";
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+
-+	ctp@5d {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gt911_int_primo81>;
-+		compatible = "goodix,gt911";
-+		reg = <0x5d>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
-+		touchscreen-swapped-x-y;
-+	};
-+};
-+
-+&i2c2 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&i2c2_pins_a>;
-+	status = "okay";
-+
-+	accelerometer@1c {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&mma8452_int_primo81>;
-+		compatible = "fsl,mma8452";
-+		reg = <0x1c>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
-+		#io-channel-cells = <1>;
-+	};
-+};
-+
-+&lradc {
-+	vref-supply = <&reg_aldo3>;
-+	status = "okay";
-+
-+	button@158 {
-+		label = "Volume Up";
-+		linux,code = <KEY_VOLUMEUP>;
-+		channel = <0>;
-+		voltage = <158730>;
-+	};
-+
-+	button@349 {
-+		label = "Volume Down";
-+		linux,code = <KEY_VOLUMEDOWN>;
-+		channel = <0>;
-+		voltage = <349206>;
-+	};
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
-+&pio {
-+	gt911_int_primo81: gt911_int_pin@0 {
-+		allwinner,pins = "PA3";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	mma8452_int_primo81: mma8452_int_pin@0 {
-+		allwinner,pins = "PA9";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
-+	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
-+		allwinner,pins = "PA8";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+};
-+
-+&p2wi {
-+	status = "okay";
-+
-+	axp22x: pmic@68 {
-+		compatible = "x-powers,axp221";
-+		reg = <0x68>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+#include "axp22x.dtsi"
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_dc1sw {
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-lcd";
-+};
-+
-+&reg_dc5ldo {
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-cpus"; /* This is an educated guess */
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-3v0";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-gpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc4 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-sys-dll";
-+};
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_dldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi";
-+};
-+
-+&reg_dldo3 {
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "vddio-csi";
-+};
-+
-+&reg_eldo3 {
-+	regulator-min-microvolt = <1080000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-mipi-bridge";
-+};
-+
-+&simplefb_lcd {
-+	vcc-lcd-supply = <&reg_dc1sw>;
-+	vdd-mipi-bridge-supply = <&reg_eldo3>;
-+};
-+
-+&usb_otg {
-+	/* otg support requires support for AXP221 usb-power-supply and GPIO */
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb1_vbus-supply = <&reg_dldo1>;
- 	status = "okay";
- };
---- /dev/null
-+++ b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
-@@ -0,0 +1,142 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun6i-a31s.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+	model = "Sinlinx SinA31s Core Board";
-+	compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc3>;
-+};
-+
-+/* eMMC on core board */
-+&mmc3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc3_8bit_emmc_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	vqmmc-supply = <&reg_dcdc1>;
-+	bus-width = <8>;
-+	non-removable;
-+	cap-mmc-hw-reset;
-+	status = "okay";
-+};
-+
-+/* AXP221s PMIC on core board */
-+&p2wi {
-+	status = "okay";
-+
-+	axp22x: pmic@68 {
-+		compatible = "x-powers,axp221";
-+		reg = <0x68>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+#include "axp22x.dtsi"
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_dc5ldo {
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-3v0";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-gpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc4 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-sys-dll";
-+};
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+/* UART0 pads available on core board */
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_a>;
-+	status = "okay";
-+};
-+
---- /dev/null
-+++ b/arch/arm/dts/sun6i-a31s-sina31s.dts
-@@ -0,0 +1,153 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/* The SinA31s development board has the SinA31s core board soldered on */
-+#include "sun6i-a31s-sina31s-core.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "Sinlinx SinA31s Development Board";
-+	compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&led_pin_sina31s>;
-+
-+		status {
-+			label = "sina31s:status:usr";
-+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
-+		};
-+	};
-+};
-+
-+&ehci0 {
-+	/* USB 2.0 4 port hub IC */
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&gmac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac_pins_mii_a>;
-+	phy = <&phy1>;
-+	phy-mode = "mii";
-+	phy-supply = <&reg_dldo1>;
-+	status = "okay";
-+
-+	phy1: ethernet-phy@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&ir {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ir_pins_a>;
-+	status = "okay";
-+};
-+
-+&lradc {
-+	vref-supply = <&reg_aldo3>;
-+	status = "okay";
-+
-+	button@158 {
-+		label = "Volume Up";
-+		linux,code = <KEY_VOLUMEUP>;
-+		channel = <0>;
-+		voltage = <158730>;
-+	};
-+
-+	button@349 {
-+		label = "Volume Down";
-+		linux,code = <KEY_VOLUMEDOWN>;
-+		channel = <0>;
-+		voltage = <349206>;
-+	};
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	led_pin_sina31s: led_pin@0 {
-+		allwinner,pins = "PH13";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
-+		allwinner,pins = "PA4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+};
-+
-+&reg_dldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-gmac-phy";
-+};
-+
-+&usbphy {
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
-@@ -0,0 +1,205 @@
-+/*
-+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun6i-a31s.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+	model = "Yones TopTech BS1078 v2 Tablet";
-+	compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		i2c1 = &i2c1;
-+		i2c2 = &i2c2;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+};
-+
-+&i2c2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c2_pins_a>;
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
-+		allwinner,pins = "PA8";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
-+	vmmc-supply = <&reg_vcc3v0>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
-+&mmc0_pins_a {
-+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+};
-+
-+&p2wi {
-+	status = "okay";
-+
-+	axp22x: pmic@68 {
-+		compatible = "x-powers,axp221";
-+		reg = <0x68>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+#include "axp22x.dtsi"
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_dc1sw {
-+	regulator-name = "vcc-lcd-usb2";
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+};
-+
-+&reg_dc5ldo {
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-3v0";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-gpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc4 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <700000>;
-+	regulator-max-microvolt = <1320000>;
-+	regulator-name = "vdd-sys-dll";
-+};
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_dldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi";
-+};
-+
-+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
-+&reg_dldo3 {
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "vddio-csi";
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_a>;
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb1_vbus-supply = <&reg_dldo1>;
-+	usb2_vbus-supply = <&reg_dc1sw>;
-+	status = "okay";
-+};
---- a/arch/arm/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
-@@ -92,6 +92,24 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+	operating-points = <
-+		/* kHz	  uV */
-+		960000	1400000
-+		912000	1400000
-+		864000	1350000
-+		720000	1250000
-+		528000	1150000
-+		312000	1100000
-+		144000	1050000
-+		>;
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -119,13 +137,9 @@
- 	status = "okay";
- 
- 	axp209: pmic@34 {
--		compatible = "x-powers,axp209";
- 		reg = <0x34>;
- 		interrupt-parent = <&nmi_intc>;
- 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
--
--		interrupt-controller;
--		#interrupt-cells = <1>;
- 	};
- };
- 
-@@ -159,7 +173,18 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
- 	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
- 		allwinner,pins = "PH10";
- 		allwinner,function = "gpio_in";
-@@ -182,6 +207,37 @@
- 	};
- };
- 
-+#include "axp209.dtsi"
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-int-dll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_usb0_vbus {
-+	status = "okay";
-+};
-+
- &reg_usb1_vbus {
- 	status = "okay";
- };
-@@ -216,7 +272,21 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usb_power_supply {
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_power-supply = <&usb_power_supply>;
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
-+++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
-@@ -84,6 +84,10 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&reg_dcdc2>;
- };
-@@ -150,6 +154,10 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
- 	led_pins_cubieboard2: led_pins@0 {
- 		allwinner,pins = "PH20", "PH21";
-@@ -157,12 +165,24 @@
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
-+
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
- };
- 
- &reg_ahci_5v {
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- #include "axp209.dtsi"
- 
- &reg_dcdc2 {
-@@ -205,6 +225,9 @@
- };
- 
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
-@@ -101,6 +101,10 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&reg_dcdc2>;
- };
---- /dev/null
-+++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
-@@ -0,0 +1,169 @@
-+/*
-+ * Copyright 2015 Stefan Roese <sr@denx.de>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun7i-a20.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+	model = "ICnova-A20 SWAC";
-+	compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&gmac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac_pins_mii_a>;
-+	phy = <&phy1>;
-+	phy-mode = "mii";
-+	status = "okay";
-+
-+	phy1: ethernet-phy@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins_a>;
-+	status = "okay";
-+
-+	axp209: pmic@34 {
-+		reg = <0x34>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+#include "axp209.dtsi"
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-int-dll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_usb1_vbus {
-+	status = "okay";
-+};
-+
-+&reg_usb2_vbus {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_a>;
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	usb2_vbus-supply = <&reg_usb2_vbus>;
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
-@@ -0,0 +1,125 @@
-+/*
-+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun7i-a20.dtsi"
-+#include "sunxi-itead-core-common.dtsi"
-+
-+/ {
-+	model = "Itead Ibox A20";
-+	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&led_pins_itead_core>;
-+
-+		green {
-+			label = "itead_core:green:usr";
-+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
-+		};
-+
-+		blue {
-+			label = "itead_core:blue:usr";
-+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
-+		};
-+	};
-+};
-+
-+&ahci {
-+	target-supply = <&reg_ahci_5v>;
-+	status = "okay";
-+};
-+
-+&codec {
-+	status = "okay";
-+};
-+
-+&gmac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac_pins_mii_a>;
-+	phy = <&phy1>;
-+	phy-mode = "mii";
-+	status = "okay";
-+
-+	phy1: ethernet-phy@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&i2c0 {
-+	axp209: pmic@34 {
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+&ir0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ir0_rx_pins_a>;
-+	status = "okay";
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
-+&pio {
-+	led_pins_itead_core: led_pins@0 {
-+		allwinner,pins = "PH20","PH21";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
-+&reg_ahci_5v {
-+	status = "okay";
-+};
---- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-@@ -97,16 +97,6 @@
- 
- &cpu0 {
- 	cpu-supply = <&reg_dcdc2>;
--	operating-points = <
--		/* kHz	  uV */
--		960000	1400000
--		912000	1400000
--		864000	1350000
--		720000	1250000
--		528000	1150000
--		312000	1100000
--		144000	1050000
--		>;
- };
- 
- &ehci0 {
---- a/arch/arm/dts/sun7i-a20-mk808c.dts
-+++ b/arch/arm/dts/sun7i-a20-mk808c.dts
-@@ -53,6 +53,7 @@
- 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
- 
- / {
- 	model = "mk808c";
-@@ -68,6 +69,10 @@
- 	};
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -121,6 +126,30 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
-+&pio {
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-+		allwinner,pins = "PH5";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
-+&reg_usb0_vbus {
-+	status = "okay";
-+};
-+
- &reg_usb1_vbus {
- 	status = "okay";
- };
-@@ -141,7 +170,17 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-@@ -1,5 +1,6 @@
- /*
-  * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
-+ * Copyright 2015 - Karsten Merker <merker@debian.org>
-  *
-  * This file is dual-licensed: you can use it either under the terms
-  * of the GPL or the X11 license, at your option. Note that this dual
-@@ -45,6 +46,7 @@
- #include "sunxi-common-regulators.dtsi"
- 
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
- 
-@@ -71,14 +73,6 @@
- 			default-state = "on";
- 		};
- 	};
--
--	reg_axp_ipsout: axp_ipsout {
--		compatible = "regulator-fixed";
--		regulator-name = "axp-ipsout";
--		regulator-min-microvolt = <5000000>;
--		regulator-max-microvolt = <5000000>;
--		regulator-always-on;
--	};
- };
- 
- &ahci {
-@@ -94,6 +88,10 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &gmac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_pins_rgmii_a>;
-@@ -118,10 +116,58 @@
- 	};
- };
- 
--&i2c1 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&i2c1_pins_a>;
-+&lradc {
-+	vref-supply = <&reg_vcc3v0>;
- 	status = "okay";
-+
-+	button@190 {
-+		label = "Volume Up";
-+		linux,code = <KEY_VOLUMEUP>;
-+		channel = <0>;
-+		voltage = <190000>;
-+	};
-+
-+	button@390 {
-+		label = "Volume Down";
-+		linux,code = <KEY_VOLUMEDOWN>;
-+		channel = <0>;
-+		voltage = <390000>;
-+	};
-+
-+	button@600 {
-+		label = "Menu";
-+		linux,code = <KEY_MENU>;
-+		channel = <0>;
-+		voltage = <600000>;
-+	};
-+
-+	button@800 {
-+		label = "Search";
-+		linux,code = <KEY_SEARCH>;
-+		channel = <0>;
-+		voltage = <800000>;
-+	};
-+
-+	button@980 {
-+		label = "Home";
-+		linux,code = <KEY_HOMEPAGE>;
-+		channel = <0>;
-+		voltage = <980000>;
-+	};
-+
-+	button@1180 {
-+		label = "Esc";
-+		linux,code = <KEY_ESC>;
-+		channel = <0>;
-+		voltage = <1180000>;
-+	};
-+
-+	button@1400 {
-+		label = "Enter";
-+		linux,code = <KEY_ENTER>;
-+		channel = <0>;
-+		voltage = <1400000>;
-+	};
- };
- 
- &mmc0 {
-@@ -134,6 +180,16 @@
- 	status = "okay";
- };
- 
-+&mmc3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
- &ohci0 {
- 	status = "okay";
- };
-@@ -161,15 +217,22 @@
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
- 
-+	mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
-+		allwinner,pins = "PH0";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
- 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
--		allwinner,pins = "PH04";
-+		allwinner,pins = "PH4";
- 		allwinner,function = "gpio_in";
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
- 
- 	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
--		allwinner,pins = "PH05";
-+		allwinner,pins = "PH5";
- 		allwinner,function = "gpio_in";
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-@@ -187,7 +250,7 @@
- &reg_dcdc2 {
- 	regulator-always-on;
- 	regulator-min-microvolt = <1000000>;
--	regulator-max-microvolt = <1425000>;
-+	regulator-max-microvolt = <1400000>;
- 	regulator-name = "vdd-cpu";
- };
- 
-@@ -235,8 +298,8 @@
- &usbphy {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
--	usb0_id_det-gpios = <&pio 7 04 GPIO_ACTIVE_HIGH>; /* PH04 */
--	usb0_vbus_det-gpios = <&pio 7 05 GPIO_ACTIVE_HIGH>; /* PH05 */
-+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
-+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
- 	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
---- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
-@@ -117,6 +117,18 @@
- 	};
- };
- 
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+
-+	eeprom: eeprom@50 {
-+		compatible = "atmel,24c16";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
---- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-@@ -170,6 +170,12 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins_a>;
- 	status = "okay";
-+
-+	eeprom: eeprom@50 {
-+		compatible = "atmel,24c16";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
- };
- 
- &mmc0 {
-@@ -190,6 +196,10 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
- 	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- 		allwinner,pins = "PC3";
-@@ -204,6 +214,27 @@
- 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
-+
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
-+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-+		allwinner,pins = "PH5";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-+	};
-+
-+	usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
-+		allwinner,pins = "PC17";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
- };
- 
- &reg_ahci_5v {
-@@ -212,6 +243,12 @@
- 	status = "okay";
- };
- 
-+&reg_usb0_vbus {
-+	pinctrl-0 = <&usb0_vbus_pin_lime2>;
-+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
-+	status = "okay";
-+};
-+
- &reg_usb1_vbus {
- 	status = "okay";
- };
-@@ -226,7 +263,17 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
-@@ -125,6 +125,12 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins_a>;
- 	status = "okay";
-+
-+	eeprom: eeprom@50 {
-+		compatible = "atmel,24c16";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
- };
- 
- &i2c2 {
---- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-@@ -95,6 +95,10 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -156,7 +160,18 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
- 	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- 		allwinner,pins = "PH10";
- 		allwinner,function = "gpio_in";
-@@ -225,6 +240,10 @@
- 	regulator-name = "avcc";
- };
- 
-+&reg_usb0_vbus {
-+	status = "okay";
-+};
-+
- &reg_usb1_vbus {
- 	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
- 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
-@@ -243,7 +262,21 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usb_power_supply {
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_power-supply = <&usb_power_supply>;
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun7i-a20-orangepi.dts
-+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
-@@ -141,7 +141,18 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
- 	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- 		allwinner,pins = "PH10";
- 		allwinner,function = "gpio_in";
-@@ -203,6 +214,10 @@
- 	regulator-name = "avcc";
- };
- 
-+&reg_usb0_vbus {
-+	status = "okay";
-+};
-+
- &reg_usb1_vbus {
- 	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
- 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
-@@ -221,7 +236,21 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usb_power_supply {
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_power-supply = <&usb_power_supply>;
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-@@ -82,6 +82,14 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -108,13 +116,9 @@
- 	status = "okay";
- 
- 	axp209: pmic@34 {
--		compatible = "x-powers,axp209";
- 		reg = <0x34>;
- 		interrupt-parent = <&nmi_intc>;
- 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
--
--		interrupt-controller;
--		#interrupt-cells = <1>;
- 	};
- };
- 
-@@ -142,6 +146,10 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
- 	ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
- 		allwinner,pins = "PH2";
-@@ -157,8 +165,15 @@
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
- 
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
- 	usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
--		allwinner,pins = "PH11";
-+		allwinner,pins = "PD2";
- 		allwinner,function = "gpio_out";
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-@@ -171,13 +186,37 @@
- 	status = "okay";
- };
- 
--&reg_usb1_vbus {
--	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
--	gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
--	status = "okay";
-+#include "axp209.dtsi"
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-int-pll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
- };
- 
--&reg_usb2_vbus {
-+/* A single regulator (U24) powers both USB host ports. */
-+&reg_usb1_vbus {
-+	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
-+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
- 	status = "okay";
- };
- 
-@@ -187,8 +226,16 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
--	usb2_vbus-supply = <&reg_usb2_vbus>;
-+	usb2_vbus-supply = <&reg_usb1_vbus>;
- 	status = "okay";
- };
---- a/arch/arm/dts/sun7i-a20-pcduino3.dts
-+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
-@@ -111,6 +111,14 @@
- 	allwinner,pins = "PH2";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -137,16 +145,14 @@
- 	status = "okay";
- 
- 	axp209: pmic@34 {
--		compatible = "x-powers,axp209";
- 		reg = <0x34>;
- 		interrupt-parent = <&nmi_intc>;
- 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
--
--		interrupt-controller;
--		#interrupt-cells = <1>;
- 	};
- };
- 
-+#include "axp209.dtsi"
-+
- &ir0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ir0_rx_pins_a>;
-@@ -171,6 +177,10 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
- &pio {
- 	led_pins_pcduino3: led_pins@0 {
- 		allwinner,pins = "PH15", "PH16";
-@@ -185,6 +195,13 @@
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 	};
-+
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
- };
- 
- &reg_ahci_5v {
-@@ -192,6 +209,31 @@
- 	status = "okay";
- };
- 
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-int-pll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
-+};
-+
- &reg_usb1_vbus {
- 	status = "okay";
- };
-@@ -206,7 +248,15 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
-+++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
-@@ -48,6 +48,7 @@
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pwm/pwm.h>
- 
- / {
- 	model = "Wexler TAB7200";
-@@ -57,11 +58,28 @@
- 		serial0 = &uart0;
- 	};
- 
-+	backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+		default-brightness-level = <8>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bl_enable_pin>;
-+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
- };
- 
-+&codec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&codec_pa_pin>;
-+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&reg_dcdc2>;
- };
-@@ -86,6 +104,8 @@
- 	};
- };
- 
-+#include "axp209.dtsi"
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins_a>;
-@@ -96,6 +116,18 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c2_pins_a>;
- 	status = "okay";
-+
-+	gt911: touchscreen@5d {
-+		compatible = "goodix,gt911";
-+		reg = <0x5d>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&ts_reset_pin>;
-+		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
-+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
-+		touchscreen-swapped-x-y;
-+	};
- };
- 
- &lradc {
-@@ -135,7 +167,45 @@
- 	status = "okay";
- };
- 
--#include "axp209.dtsi"
-+&otg_sram {
-+	status = "okay";
-+};
-+
-+&pio {
-+	bl_enable_pin: bl_enable_pin@0 {
-+		allwinner,pins = "PH7";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	codec_pa_pin: codec_pa_pin@0 {
-+		allwinner,pins = "PH15";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	ts_reset_pin: ts_reset_pin@0 {
-+		allwinner,pins = "PB13";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+};
-+
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_pins_a>;
-+	status = "okay";
-+};
- 
- &reg_dcdc2 {
- 	regulator-always-on;
-@@ -162,6 +232,10 @@
- 	regulator-name = "avcc";
- };
- 
-+&reg_usb0_vbus {
-+	status = "okay";
-+};
-+
- &reg_usb1_vbus {
- 	status = "okay";
- };
-@@ -176,7 +250,21 @@
- 	status = "okay";
- };
- 
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usb_power_supply {
-+	status = "okay";
-+};
-+
- &usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_power-supply = <&usb_power_supply>;
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
- 	usb1_vbus-supply = <&reg_usb1_vbus>;
- 	usb2_vbus-supply = <&reg_usb2_vbus>;
- 	status = "okay";
---- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-@@ -1,13 +1,52 @@
- /*
-- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
-+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
-  *
-- * Minimal dts file for the Wits Pro A20 DKT for u-boot only
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-  *
-- * SPDX-License-Identifier:     GPL-2.0+ or X11
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-  */
- 
- /dts-v1/;
- #include "sun7i-a20.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
- 
- / {
- 	model = "Wits Pro A20 DKT";
-@@ -20,6 +59,17 @@
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	mmc3_pwrseq: mmc3_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
-+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
- };
- 
- &ehci0 {
-@@ -42,6 +92,60 @@
- 	};
- };
- 
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins_a>;
-+	status = "okay";
-+
-+	axp209: pmic@34 {
-+		reg = <0x34>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+};
-+
-+&i2c2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c2_pins_a>;
-+	status = "okay";
-+};
-+
-+#include "axp209.dtsi"
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
-+&mmc3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc3_pins_a>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&mmc3_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	brcmf: bcrmf@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
- &ohci0 {
- 	status = "okay";
- };
-@@ -50,8 +154,85 @@
- 	status = "okay";
- };
- 
-+&otg_sram {
-+	status = "okay";
-+};
-+
-+&pio {
-+	vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
-+		allwinner,pins = "PH9";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+		allwinner,pins = "PH4";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1450000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-int-dll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_usb0_vbus {
-+	status = "okay";
-+};
-+
-+&reg_usb1_vbus {
-+	status = "okay";
-+};
-+
-+&reg_usb2_vbus {
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_pins_a>;
- 	status = "okay";
- };
-+
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usb_power_supply {
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&usb0_id_detect_pin>;
-+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+	usb0_vbus_power-supply = <&usb_power_supply>;
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	usb2_vbus-supply = <&reg_usb2_vbus>;
-+	status = "okay";
-+};
---- a/arch/arm/dts/sun7i-a20.dtsi
-+++ b/arch/arm/dts/sun7i-a20.dtsi
-@@ -47,6 +47,7 @@
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/thermal/thermal.h>
- 
-+#include <dt-bindings/clock/sun4i-a10-pll2.h>
- #include <dt-bindings/dma/sun4i-a10.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
- 
-@@ -67,7 +68,7 @@
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_be0-lcd0-hdmi";
- 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
--				 <&ahb_gates 44>;
-+				 <&ahb_gates 44>, <&dram_gates 26>;
- 			status = "disabled";
- 		};
- 
-@@ -75,7 +76,8 @@
- 			compatible = "allwinner,simple-framebuffer",
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_be0-lcd0";
--			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
-+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
-+				 <&dram_gates 26>;
- 			status = "disabled";
- 		};
- 
-@@ -84,7 +86,7 @@
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_be0-lcd0-tve0";
- 			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
--				 <&ahb_gates 44>;
-+				 <&ahb_gates 44>, <&dram_gates 26>;
- 			status = "disabled";
- 		};
- 	};
-@@ -107,7 +109,7 @@
- 				720000	1200000
- 				528000	1100000
- 				312000	1000000
--				144000	900000
-+				144000	1000000
- 				>;
- 			#cooling-cells = <2>;
- 			cooling-min-level = <0>;
-@@ -199,6 +201,15 @@
- 			clock-output-names = "pll1";
- 		};
- 
-+		pll2: clk@01c20008 {
-+			#clock-cells = <1>;
-+			compatible = "allwinner,sun4i-a10-pll2-clk";
-+			reg = <0x01c20008 0x8>;
-+			clocks = <&osc24M>;
-+			clock-output-names = "pll2-1x", "pll2-2x",
-+					     "pll2-4x", "pll2-8x";
-+		};
-+
- 		pll4: clk@01c20018 {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun7i-a20-pll4-clk";
-@@ -267,6 +278,19 @@
- 			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- 			reg = <0x01c20060 0x8>;
- 			clocks = <&ahb>;
-+			clock-indices = <0>, <1>,
-+					<2>, <3>, <4>,
-+					<5>, <6>, <7>, <8>,
-+					<9>, <10>, <11>, <12>,
-+					<13>, <14>, <16>,
-+					<17>, <18>, <20>, <21>,
-+					<22>, <23>, <25>,
-+					<28>, <32>, <33>, <34>,
-+					<35>, <36>, <37>, <40>,
-+					<41>, <42>, <43>,
-+					<44>, <45>, <46>,
-+					<47>, <49>, <50>,
-+					<52>;
- 			clock-output-names = "ahb_usb0", "ahb_ehci0",
- 				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
- 				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-@@ -295,6 +319,10 @@
- 			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- 			reg = <0x01c20068 0x4>;
- 			clocks = <&apb0>;
-+			clock-indices = <0>, <1>,
-+					<2>, <3>, <4>,
-+					<5>, <6>, <7>,
-+					<8>, <10>;
- 			clock-output-names = "apb0_codec", "apb0_spdif",
- 				"apb0_ac97", "apb0_iis0", "apb0_iis1",
- 				"apb0_pio", "apb0_ir0", "apb0_ir1",
-@@ -314,6 +342,12 @@
- 			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- 			reg = <0x01c2006c 0x4>;
- 			clocks = <&apb1>;
-+			clock-indices = <0>, <1>,
-+					<2>, <3>, <4>,
-+					<5>, <6>, <7>,
-+					<15>, <16>, <17>,
-+					<18>, <19>, <20>,
-+					<21>, <22>, <23>;
- 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
- 				"apb1_i2c2", "apb1_i2c3", "apb1_can",
- 				"apb1_scr", "apb1_ps20", "apb1_ps21",
-@@ -442,6 +476,14 @@
- 			clock-output-names = "ir1";
- 		};
- 
-+		keypad_clk: clk@01c200c4 {
-+			#clock-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-mod0-clk";
-+			reg = <0x01c200c4 0x4>;
-+			clocks = <&osc24M>;
-+			clock-output-names = "keypad";
-+		};
-+
- 		usb_clk: clk@01c200cc {
- 			#clock-cells = <1>;
- 			#reset-cells = <1>;
-@@ -460,6 +502,48 @@
- 			clock-output-names = "spi3";
- 		};
- 
-+		dram_gates: clk@01c20100 {
-+			#clock-cells = <1>;
-+			compatible = "allwinner,sun4i-a10-dram-gates-clk";
-+			reg = <0x01c20100 0x4>;
-+			clocks = <&pll5 0>;
-+			clock-indices = <0>,
-+					<1>, <2>,
-+					<3>,
-+					<4>,
-+					<5>, <6>,
-+					<15>,
-+					<24>, <25>,
-+					<26>, <27>,
-+					<28>, <29>;
-+			clock-output-names = "dram_ve",
-+					     "dram_csi0", "dram_csi1",
-+					     "dram_ts",
-+					     "dram_tvd",
-+					     "dram_tve0", "dram_tve1",
-+					     "dram_output",
-+					     "dram_de_fe1", "dram_de_fe0",
-+					     "dram_de_be0", "dram_de_be1",
-+					     "dram_de_mp", "dram_ace";
-+		};
-+
-+		ve_clk: clk@01c2013c {
-+			#clock-cells = <0>;
-+			#reset-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-ve-clk";
-+			reg = <0x01c2013c 0x4>;
-+			clocks = <&pll4>;
-+			clock-output-names = "ve";
-+		};
-+
-+		codec_clk: clk@01c20140 {
-+			#clock-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-codec-clk";
-+			reg = <0x01c20140 0x4>;
-+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
-+			clock-output-names = "codec";
-+		};
-+
- 		mbus_clk: clk@01c2015c {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun5i-a13-mbus-clk";
-@@ -744,6 +828,14 @@
- 			status = "disabled";
- 		};
- 
-+		crypto: crypto-engine@01c15000 {
-+			compatible = "allwinner,sun4i-a10-crypto";
-+			reg = <0x01c15000 0x1000>;
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ahb_gates 5>, <&ss_clk>;
-+			clock-names = "ahb", "mod";
-+		};
-+
- 		spi2: spi@01c17000 {
- 			compatible = "allwinner,sun4i-a10-spi";
- 			reg = <0x01c17000 0x1000>;
-@@ -1159,6 +1251,19 @@
- 			status = "disabled";
- 		};
- 
-+		codec: codec@01c22c00 {
-+			#sound-dai-cells = <0>;
-+			compatible = "allwinner,sun7i-a20-codec";
-+			reg = <0x01c22c00 0x40>;
-+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&apb0_gates 0>, <&codec_clk>;
-+			clock-names = "apb", "codec";
-+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
-+			       <&dma SUN4I_DMA_NORMAL 19>;
-+			dma-names = "rx", "tx";
-+			status = "disabled";
-+		};
-+
- 		sid: eeprom@01c23800 {
- 			compatible = "allwinner,sun7i-a20-sid";
- 			reg = <0x01c23800 0x200>;
---- a/arch/arm/dts/sun8i-a23-a33.dtsi
-+++ b/arch/arm/dts/sun8i-a23-a33.dtsi
-@@ -56,7 +56,7 @@
- 		#size-cells = <1>;
- 		ranges;
- 
--		framebuffer@0 {
-+		simplefb_lcd: framebuffer@0 {
- 			compatible = "allwinner,simple-framebuffer",
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "de_be0-lcd0";
-@@ -175,27 +175,13 @@
- 			clock-output-names = "apb1";
- 		};
- 
--		ahb1_gates: clk@01c20060 {
--			#clock-cells = <1>;
--			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
--			reg = <0x01c20060 0x8>;
--			clocks = <&ahb1>;
--			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
--					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
--					"ahb1_nand", "ahb1_sdram",
--					"ahb1_hstimer", "ahb1_spi0",
--					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
--					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
--					"ahb1_csi", "ahb1_be",	"ahb1_fe",
--					"ahb1_gpu", "ahb1_spinlock",
--					"ahb1_drc";
--		};
--
- 		apb1_gates: clk@01c20068 {
- 			#clock-cells = <1>;
- 			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
- 			reg = <0x01c20068 0x4>;
- 			clocks = <&apb1>;
-+			clock-indices = <0>, <5>,
-+					<12>, <13>;
- 			clock-output-names = "apb1_codec", "apb1_pio",
- 					"apb1_daudio0",	"apb1_daudio1";
- 		};
-@@ -213,6 +199,10 @@
- 			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
- 			reg = <0x01c2006c 0x4>;
- 			clocks = <&apb2>;
-+			clock-indices = <0>, <1>,
-+					<2>, <16>,
-+					<17>, <18>,
-+					<19>, <20>;
- 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
- 					"apb2_i2c2", "apb2_uart0",
- 					"apb2_uart1", "apb2_uart2",
-@@ -391,12 +381,19 @@
- 				allwinner,pins = "PC5", "PC6", "PC8",
- 						 "PC9", "PC10", "PC11",
- 						 "PC12", "PC13", "PC14",
--						 "PC15";
-+						 "PC15", "PC16";
- 				allwinner,function = "mmc2";
- 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 			};
- 
-+			pwm0_pins: pwm0 {
-+				allwinner,pins = "PH0";
-+				allwinner,function = "pwm0";
-+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+			};
-+
- 			i2c0_pins_a: i2c0@0 {
- 				allwinner,pins = "PH2", "PH3";
- 				allwinner,function = "i2c0";
-@@ -451,6 +448,14 @@
- 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- 		};
- 
-+		pwm: pwm@01c21400 {
-+			compatible = "allwinner,sun7i-a20-pwm";
-+			reg = <0x01c21400 0xc>;
-+			clocks = <&osc24M>;
-+			#pwm-cells = <3>;
-+			status = "disabled";
-+		};
-+
- 		lradc: lradc@01c22800 {
- 			compatible = "allwinner,sun4i-a10-lradc-keys";
- 			reg = <0x01c22800 0x100>;
-@@ -574,6 +579,14 @@
- 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- 		};
- 
-+		nmi_intc: interrupt-controller@01f00c0c {
-+			compatible = "allwinner,sun6i-a31-sc-nmi";
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+			reg = <0x01f00c0c 0x38>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
- 		prcm@01f01400 {
- 			compatible = "allwinner,sun8i-a23-prcm";
- 			reg = <0x01f01400 0x200>;
-@@ -642,10 +655,18 @@
- 			resets = <&apb0_rst 0>;
- 			gpio-controller;
- 			interrupt-controller;
-+			#interrupt-cells = <3>;
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			#gpio-cells = <3>;
- 
-+			r_rsb_pins: r_rsb {
-+				allwinner,pins = "PL0", "PL1";
-+				allwinner,function = "s_rsb";
-+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+			};
-+
- 			r_uart_pins_a: r_uart@0 {
- 				allwinner,pins = "PL2", "PL3";
- 				allwinner,function = "s_uart";
-@@ -653,5 +674,19 @@
- 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 			};
- 		};
-+
-+		r_rsb: rsb@01f03400 {
-+			compatible = "allwinner,sun8i-a23-rsb";
-+			reg = <0x01f03400 0x400>;
-+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&apb0_gates 3>;
-+			clock-frequency = <3000000>;
-+			resets = <&apb0_rst 3>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&r_rsb_pins>;
-+			status = "disabled";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
- 	};
- };
---- a/arch/arm/dts/sun8i-a23-gt90h-v4.dts
-+++ b/arch/arm/dts/sun8i-a23-gt90h-v4.dts
-@@ -47,15 +47,26 @@
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/pwm/pwm.h>
- 
- / {
--	model = "Allwinner GT90H Quad Core Tablet (v4)";
--	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
-+	model = "Allwinner GT90H Dual Core Tablet (v4)";
-+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
- 
- 	aliases {
- 		serial0 = &r_uart;
- 	};
- 
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bl_en_pin_gt90h>;
-+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+		default-brightness-level = <8>;
-+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-@@ -106,8 +117,7 @@
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
--	/* FIXME this really is aldo1, correct once we've pmic support */
--	vmmc-supply = <&reg_vcc3v0>;
-+	vmmc-supply = <&reg_aldo1>;
- 	bus-width = <4>;
- 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- 	cd-inverted;
-@@ -115,6 +125,13 @@
- };
- 
- &pio {
-+	bl_en_pin_gt90h: bl_en_pin@0 {
-+		allwinner,pins = "PH6";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
- 	mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
- 		allwinner,pins = "PB4";
- 		allwinner,function = "gpio_in";
-@@ -123,12 +140,106 @@
- 	};
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_pins>;
-+	status = "okay";
-+};
-+
-+&r_rsb {
-+	status = "okay";
-+
-+	axp22x: pmic@3a3 {
-+		compatible = "x-powers,axp223";
-+		reg = <0x3a3>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		eldoin-supply = <&reg_dcdc1>;
-+	};
-+};
-+
- &r_uart {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&r_uart_pins_a>;
- 	status = "okay";
- };
- 
-+#include "axp22x.dtsi"
-+
-+&reg_aldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-io";
-+};
-+
-+&reg_aldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2350000>;
-+	regulator-max-microvolt = <2650000>;
-+	regulator-name = "vdd-dll";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dc1sw {
-+	regulator-name = "vcc-lcd";
-+};
-+
-+&reg_dc5ldo {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-3v0";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-sys";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_dldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi";
-+};
-+
-+&reg_rtc_ldo {
-+	regulator-name = "vcc-rtc";
-+};
-+
-+&simplefb_lcd {
-+	vcc-lcd-supply = <&reg_dc1sw>;
-+};
-+
- /*
-  * FIXME for now we only support host mode and rely on u-boot to have
-  * turned on Vbus which is controlled by the axp223 pmic on the board.
-@@ -141,5 +252,6 @@
- };
- 
- &usbphy {
-+	usb1_vbus-supply = <&reg_dldo1>;
- 	status = "okay";
- };
---- a/arch/arm/dts/sun8i-a23.dtsi
-+++ b/arch/arm/dts/sun8i-a23.dtsi
-@@ -50,6 +50,31 @@
- 	};
- 
- 	clocks {
-+		ahb1_gates: clk@01c20060 {
-+			#clock-cells = <1>;
-+			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-+			reg = <0x01c20060 0x8>;
-+			clocks = <&ahb1>;
-+			clock-indices = <1>, <6>,
-+					<8>, <9>, <10>,
-+					<13>, <14>,
-+					<19>, <20>,
-+					<21>, <24>, <26>,
-+					<29>, <32>, <36>,
-+					<40>, <44>, <46>,
-+					<52>, <53>,
-+					<54>, <57>;
-+			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-+					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-+					"ahb1_nand", "ahb1_sdram",
-+					"ahb1_hstimer", "ahb1_spi0",
-+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-+					"ahb1_gpu", "ahb1_msgbox",
-+					"ahb1_spinlock", "ahb1_drc";
-+		};
-+
- 		mbus_clk: clk@01c2015c {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun8i-a23-mbus-clk";
---- a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
-+++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
-@@ -68,7 +68,7 @@
- };
- 
- &lradc {
--	vref-supply = <&reg_vcc3v0>;
-+	vref-supply = <&reg_dcdc1>;
- 	status = "okay";
- 
- 	button@200 {
-@@ -96,7 +96,7 @@
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
--	vmmc-supply = <&reg_vcc3v0>;
-+	vmmc-supply = <&reg_dcdc1>;
- 	bus-width = <4>;
- 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- 	cd-inverted;
-@@ -106,13 +106,16 @@
- &mmc2 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc2_8bit_pins>;
--	vmmc-supply = <&reg_vcc3v0>;
-+	vmmc-supply = <&reg_dcdc1>;
- 	bus-width = <8>;
- 	non-removable;
-+	cap-mmc-hw-reset;
- 	status = "okay";
- };
- 
- &mmc2_8bit_pins {
-+	/* Increase drive strength for DDR modes */
-+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- 	/* eMMC is missing pull-ups */
- 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-@@ -130,6 +133,80 @@
- 	};
- };
- 
-+&r_rsb {
-+	status = "okay";
-+
-+	axp22x: pmic@3a3 {
-+		compatible = "x-powers,axp223";
-+		reg = <0x3a3>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		eldoin-supply = <&reg_dcdc1>;
-+	};
-+};
-+
-+#include "axp22x.dtsi"
-+
-+&reg_aldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-io";
-+};
-+
-+&reg_aldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2350000>;
-+	regulator-max-microvolt = <2650000>;
-+	regulator-name = "vdd-dll";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dc5ldo {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-3v0";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-sys";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_rtc_ldo {
-+	regulator-name = "vcc-rtc";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_pins_b>;
---- a/arch/arm/dts/sun8i-a33.dtsi
-+++ b/arch/arm/dts/sun8i-a33.dtsi
-@@ -72,6 +72,41 @@
- 			clock-output-names = "pll11";
- 		};
- 
-+		ahb1_gates: clk@01c20060 {
-+			#clock-cells = <1>;
-+			compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
-+			reg = <0x01c20060 0x8>;
-+			clocks = <&ahb1>;
-+			clock-indices = <1>, <5>,
-+				        <6>, <8>, <9>,
-+				        <10>, <13>, <14>,
-+					<19>, <20>,
-+					<21>, <24>, <26>,
-+					<29>, <32>, <36>,
-+					<40>, <44>, <46>,
-+					<52>, <53>,
-+					<54>, <57>,
-+					<58>;
-+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-+					"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
-+					"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
-+					"ahb1_hstimer", "ahb1_spi0",
-+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-+					"ahb1_gpu", "ahb1_msgbox",
-+					"ahb1_spinlock", "ahb1_drc",
-+					"ahb1_sat";
-+		};
-+
-+		ss_clk: clk@01c2009c {
-+			#clock-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-mod0-clk";
-+			reg = <0x01c2009c 0x4>;
-+			clocks = <&osc24M>, <&pll6 0>;
-+			clock-output-names = "ss";
-+		};
-+
- 		mbus_clk: clk@01c2015c {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun8i-a23-mbus-clk";
-@@ -82,6 +117,16 @@
- 	};
- 
- 	soc@01c00000 {
-+		crypto: crypto-engine@01c15000 {
-+			compatible = "allwinner,sun4i-a10-crypto";
-+			reg = <0x01c15000 0x1000>;
-+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ahb1_gates 5>, <&ss_clk>;
-+			clock-names = "ahb", "mod";
-+			resets = <&ahb1_rst 5>;
-+			reset-names = "ahb";
-+		};
-+
- 		usb_otg: usb@01c19000 {
- 			compatible = "allwinner,sun8i-a33-musb";
- 			reg = <0x01c19000 0x0400>;
---- /dev/null
-+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-@@ -0,0 +1,65 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai
-+ *
-+ * Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-a83t.dtsi"
-+
-+/ {
-+	model = "Cubietech Cubietruck Plus";
-+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_b>;
-+	status = "okay";
-+};
---- a/arch/arm/dts/sun8i-a83t.dtsi
-+++ b/arch/arm/dts/sun8i-a83t.dtsi
-@@ -52,12 +52,6 @@
- / {
- 	interrupt-parent = <&gic>;
- 
--	chosen {
--		#address-cells = <1>;
--		#size-cells = <1>;
--		ranges;
--	};
--
- 	cpus {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-@@ -85,6 +79,7 @@
- 			device_type = "cpu";
- 			reg = <3>;
- 		};
-+
- 		cpu@100 {
- 			compatible = "arm,cortex-a7";
- 			device_type = "cpu";
-@@ -96,6 +91,7 @@
- 			device_type = "cpu";
- 			reg = <0x101>;
- 		};
-+
- 		cpu@102 {
- 			compatible = "arm,cortex-a7";
- 			device_type = "cpu";
-@@ -109,18 +105,12 @@
- 		};
- 	};
- 
--	memory {
--		reg = <0x40000000 0x80000000>;
--	};
--
- 	timer {
- 		compatible = "arm,armv7-timer";
--		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
--		clock-frequency = <24000000>;
--		arm,cpu-registers-not-fw-configured;
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
- 	};
- 
- 	clocks {
-@@ -128,6 +118,7 @@
- 		#size-cells = <1>;
- 		ranges;
- 
-+		/* TODO: PRCM block has a mux for this. */
- 		osc24M: osc24M_clk {
- 			#clock-cells = <0>;
- 			compatible = "fixed-clock";
-@@ -135,36 +126,39 @@
- 			clock-output-names = "osc24M";
- 		};
- 
--		osc32k: osc32k_clk {
-+		/*
-+		 * This is called "internal OSC" in some places.
-+		 * It is an internal RC-based oscillator.
-+		 * TODO: Its controls are in the PRCM block.
-+		 */
-+		osc16M: osc16M_clk {
- 			#clock-cells = <0>;
- 			compatible = "fixed-clock";
--			clock-frequency = <32768>;
--			clock-output-names = "osc32k";
-+			clock-frequency = <16000000>;
-+			clock-output-names = "osc16M";
-+		};
-+
-+		osc16Md512: osc16Md512_clk {
-+			#clock-cells = <0>;
-+			compatible = "fixed-factor-clock";
-+			clock-div = <512>;
-+			clock-mult = <1>;
-+			clocks = <&osc16M>;
-+			clock-output-names = "osc16M-d512";
- 		};
- 	};
- 
--	soc@01c00000 {
-+	soc {
- 		compatible = "simple-bus";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		ranges;
- 
--		gic: interrupt-controller@01c81000 {
--			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
--			reg = <0x01c81000 0x1000>,
--			      <0x01c82000 0x1000>,
--			      <0x01c84000 0x2000>,
--			      <0x01c86000 0x2000>;
--			interrupt-controller;
--			#interrupt-cells = <3>;
--			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
--		};
--
- 		pio: pinctrl@01c20800 {
- 			compatible = "allwinner,sun8i-a83t-pinctrl";
- 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
--			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
--			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- 			reg = <0x01c20800 0x400>;
- 			clocks = <&osc24M>;
- 			gpio-controller;
-@@ -172,27 +166,6 @@
- 			#interrupt-cells = <3>;
- 			#gpio-cells = <3>;
- 
--			i2c0_pins_a: i2c0@0 {
--				allwinner,pins = "PH0", "PH1";
--				allwinner,function = "i2c0";
--				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
--				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--			};
--
--			i2c1_pins_a: i2c1@0 {
--				allwinner,pins = "PH2", "PH3";
--				allwinner,function = "i2c1";
--				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
--				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--			};
--
--			i2c2_pins_a: i2c2@0 {
--				allwinner,pins = "PH4", "PH5";
--				allwinner,function = "i2c2";
--				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
--				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--			};
--
- 			mmc0_pins_a: mmc0@0 {
- 				allwinner,pins = "PF0", "PF1", "PF2",
- 						 "PF3", "PF4", "PF5";
-@@ -201,24 +174,6 @@
- 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- 			};
- 
--			mmc1_pins_a: mmc1@0 {
--				allwinner,pins = "PG0", "PG1", "PG2",
--						 "PG3", "PG4", "PG5";
--				allwinner,function = "mmc1";
--				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
--				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--			};
--
--			mmc2_8bit_pins: mmc2_8bit {
--				allwinner,pins = "PC5", "PC6", "PC8",
--						 "PC9", "PC10", "PC11",
--						 "PC12", "PC13", "PC14",
--						 "PC15";
--				allwinner,function = "mmc2";
--				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
--				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--			};
--
- 			uart0_pins_a: uart0@0 {
- 				allwinner,pins = "PF2", "PF4";
- 				allwinner,function = "uart0";
-@@ -234,6 +189,21 @@
- 			};
- 		};
- 
-+		timer@01c20c00 {
-+			compatible = "allwinner,sun4i-a10-timer";
-+			reg = <0x01c20c00 0xa0>;
-+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&osc24M>;
-+		};
-+
-+		watchdog@01c20ca0 {
-+			compatible = "allwinner,sun6i-a31-wdt";
-+			reg = <0x01c20ca0 0x20>;
-+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&osc24M>;
-+		};
-+
- 		uart0: serial@01c28000 {
- 			compatible = "snps,dw-apb-uart";
- 			reg = <0x01c28000 0x400>;
-@@ -243,5 +213,16 @@
- 			clocks = <&osc24M>;
- 			status = "disabled";
- 		};
-+
-+		gic: interrupt-controller@01c81000 {
-+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-+			reg = <0x01c81000 0x1000>,
-+			      <0x01c82000 0x1000>,
-+			      <0x01c84000 0x2000>,
-+			      <0x01c86000 0x2000>;
-+			interrupt-controller;
-+			#interrupt-cells = <3>;
-+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-+		};
- 	};
- };
---- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts
-+++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts
-@@ -45,6 +45,7 @@
- #include "sunxi-common-regulators.dtsi"
- 
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
- 
- / {
-@@ -58,6 +59,43 @@
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&leds_opc>;
-+
-+		status_led {
-+			label = "status:red:user";
-+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	r_leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&leds_r_opc>;
-+
-+		tx {
-+			label = "pwr:green:user";
-+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
-+		};
-+	};
-+
-+	r_gpio_keys {
-+		compatible = "gpio-keys";
-+		input-name = "sw4";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&sw_r_opc>;
-+
-+		sw4@0 {
-+			label = "sw4";
-+			linux,code = <BTN_0>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
- };
- 
- &ehci1 {
-@@ -72,6 +110,12 @@
- 	status = "okay";
- };
- 
-+&ir {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ir_pins_a>;
-+	status = "okay";
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-@@ -94,6 +138,31 @@
- 	status = "okay";
- };
- 
-+&pio {
-+	leds_opc: led_pins@0 {
-+		allwinner,pins = "PA15";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
-+&r_pio {
-+	leds_r_opc: led_pins@0 {
-+		allwinner,pins = "PL10";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	sw_r_opc: key_pins@0 {
-+		allwinner,pins = "PL03";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_pins_a>;
---- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-+++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-@@ -45,6 +45,7 @@
- #include "sunxi-common-regulators.dtsi"
- 
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
- 
- / {
-@@ -70,6 +71,68 @@
- 		enable-active-high;
- 		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- 	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&leds_opc>;
-+
-+		status_led {
-+			label = "status:red:user";
-+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	r_leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&leds_r_opc>;
-+
-+		tx {
-+			label = "pwr:green:user";
-+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
-+		};
-+	};
-+
-+	r_gpio_keys {
-+		compatible = "gpio-keys";
-+		input-name = "sw4";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&sw_r_opc>;
-+
-+		sw4@0 {
-+			label = "sw4";
-+			linux,code = <BTN_0>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&pio {
-+	leds_opc: led_pins@0 {
-+		allwinner,pins = "PA15";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
-+&r_pio {
-+	leds_r_opc: led_pins@0 {
-+		allwinner,pins = "PL10";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	sw_r_opc: key_pins@0 {
-+		allwinner,pins = "PL03";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
- };
- 
- &ehci1 {
---- a/arch/arm/dts/sun8i-h3.dtsi
-+++ b/arch/arm/dts/sun8i-h3.dtsi
-@@ -83,12 +83,6 @@
- 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
--		clock-frequency = <24000000>;
--		arm,cpu-registers-not-fw-configured;
--	};
--
--	memory {
--		reg = <0x40000000 0x80000000>;
- 	};
- 
- 	clocks {
-@@ -131,15 +125,24 @@
- 			compatible = "allwinner,sun6i-a31-pll6-clk";
- 			reg = <0x01c20028 0x4>;
- 			clocks = <&osc24M>;
--			clock-output-names = "pll6", "pll6x2", "pll6d2";
-+			clock-output-names = "pll6", "pll6x2";
- 		};
- 
--		pll8: clk@01c20044 {
--			#clock-cells = <1>;
--			compatible = "allwinner,sun6i-a31-pll6-clk";
--			reg = <0x01c20044 0x4>;
--			clocks = <&osc24M>;
--			clock-output-names = "pll8", "pll8x2";
-+		pll6d2: pll6d2_clk {
-+			#clock-cells = <0>;
-+			compatible = "fixed-factor-clock";
-+			clock-div = <2>;
-+			clock-mult = <1>;
-+			clocks = <&pll6 0>;
-+			clock-output-names = "pll6d2";
-+		};
-+
-+		/* dummy clock until pll6 can be reused */
-+		pll8: pll8_clk {
-+			#clock-cells = <0>;
-+			compatible = "fixed-clock";
-+			clock-frequency = <1>;
-+			clock-output-names = "pll8";
- 		};
- 
- 		cpu: cpu_clk@01c20050 {
-@@ -170,7 +173,7 @@
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun8i-h3-ahb2-clk";
- 			reg = <0x01c2005c 0x4>;
--			clocks = <&ahb1>, <&pll6 2>;
-+			clocks = <&ahb1>, <&pll6d2>;
- 			clock-output-names = "ahb2";
- 		};
- 
-@@ -213,34 +216,34 @@
- 					<76>, <77>, <78>,
- 					<96>, <97>, <98>,
- 					<112>, <113>,
--					<114>, <115>, <116>,
--					<128>, <135>;
--			clock-output-names = "ahb1_ce", "ahb1_dma", "ahb1_mmc0",
--					"ahb1_mmc1", "ahb1_mmc2", "ahb1_nand",
--					"ahb1_sdram", "ahb2_gmac", "ahb1_ts",
--					"ahb1_hstimer", "ahb1_spi0",
--					"ahb1_spi1", "ahb1_otg",
--					"ahb1_otg_ehci0", "ahb1_ehic1",
--					"ahb1_ehic2", "ahb1_ehic3",
--					"ahb1_otg_ohci0", "ahb2_ohic1",
--					"ahb2_ohic2", "ahb2_ohic3", "ahb1_ve",
--					"ahb1_lcd0", "ahb1_lcd1", "ahb1_deint",
--					"ahb1_csi", "ahb1_tve", "ahb1_hdmi",
--					"ahb1_de", "ahb1_gpu", "ahb1_msgbox",
--					"ahb1_spinlock", "apb1_codec",
--					"apb1_spdif", "apb1_pio", "apb1_ths",
--					"apb1_i2s0", "apb1_i2s1", "apb1_i2s2",
--					"apb2_i2c0", "apb2_i2c1", "apb2_i2c2",
--					"apb2_uart0", "apb2_uart1",
--					"apb2_uart2", "apb2_uart3", "apb2_scr",
--					"ahb1_ephy", "ahb1_dbg";
-+					<114>, <115>,
-+					<116>, <128>, <135>;
-+			clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
-+					     "bus_mmc1", "bus_mmc2", "bus_nand",
-+					     "bus_sdram", "bus_gmac", "bus_ts",
-+					     "bus_hstimer", "bus_spi0",
-+					     "bus_spi1", "bus_otg",
-+					     "bus_otg_ehci0", "bus_ehci1",
-+					     "bus_ehci2", "bus_ehci3",
-+					     "bus_otg_ohci0", "bus_ohci1",
-+					     "bus_ohci2", "bus_ohci3", "bus_ve",
-+					     "bus_lcd0", "bus_lcd1", "bus_deint",
-+					     "bus_csi", "bus_tve", "bus_hdmi",
-+					     "bus_de", "bus_gpu", "bus_msgbox",
-+					     "bus_spinlock", "bus_codec",
-+					     "bus_spdif", "bus_pio", "bus_ths",
-+					     "bus_i2s0", "bus_i2s1", "bus_i2s2",
-+					     "bus_i2c0", "bus_i2c1", "bus_i2c2",
-+					     "bus_uart0", "bus_uart1",
-+					     "bus_uart2", "bus_uart3",
-+					     "bus_scr", "bus_ephy", "bus_dbg";
- 		};
- 
- 		mmc0_clk: clk@01c20088 {
- 			#clock-cells = <1>;
- 			compatible = "allwinner,sun4i-a10-mmc-clk";
- 			reg = <0x01c20088 0x4>;
--			clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
-+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
- 			clock-output-names = "mmc0",
- 					     "mmc0_output",
- 					     "mmc0_sample";
-@@ -250,7 +253,7 @@
- 			#clock-cells = <1>;
- 			compatible = "allwinner,sun4i-a10-mmc-clk";
- 			reg = <0x01c2008c 0x4>;
--			clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
-+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
- 			clock-output-names = "mmc1",
- 					     "mmc1_output",
- 					     "mmc1_sample";
-@@ -260,7 +263,7 @@
- 			#clock-cells = <1>;
- 			compatible = "allwinner,sun4i-a10-mmc-clk";
- 			reg = <0x01c20090 0x4>;
--			clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
-+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
- 			clock-output-names = "mmc2",
- 					     "mmc2_output",
- 					     "mmc2_sample";
-@@ -285,6 +288,33 @@
- 			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
- 			clock-output-names = "mbus";
- 		};
-+
-+		apb0: apb0_clk {
-+			compatible = "fixed-factor-clock";
-+			#clock-cells = <0>;
-+			clock-div = <1>;
-+			clock-mult = <1>;
-+			clocks = <&osc24M>;
-+			clock-output-names = "apb0";
-+		};
-+
-+		apb0_gates: clk@01f01428 {
-+			compatible = "allwinner,sun8i-h3-apb0-gates-clk",
-+				     "allwinner,sun4i-a10-gates-clk";
-+			reg = <0x01f01428 0x4>;
-+			#clock-cells = <1>;
-+			clocks = <&apb0>;
-+			clock-indices = <0>, <1>;
-+			clock-output-names = "apb0_pio", "apb0_ir";
-+		};
-+
-+		ir_clk: ir_clk@01f01454 {
-+			compatible = "allwinner,sun4i-a10-mod0-clk";
-+			reg = <0x01f01454 0x4>;
-+			#clock-cells = <0>;
-+			clocks = <&osc32k>, <&osc24M>;
-+			clock-output-names = "ir";
-+		};
- 	};
- 
- 	soc {
-@@ -298,7 +328,7 @@
- 			reg = <0x01c02000 0x1000>;
- 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&bus_gates 6>;
--			resets = <&bus_rst 6>;
-+			resets = <&ahb_rst 6>;
- 			#dma-cells = <1>;
- 		};
- 
-@@ -313,7 +343,7 @@
- 				      "mmc",
- 				      "output",
- 				      "sample";
--			resets = <&bus_rst 8>;
-+			resets = <&ahb_rst 8>;
- 			reset-names = "ahb";
- 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
-@@ -332,7 +362,7 @@
- 				      "mmc",
- 				      "output",
- 				      "sample";
--			resets = <&bus_rst 9>;
-+			resets = <&ahb_rst 9>;
- 			reset-names = "ahb";
- 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
-@@ -351,7 +381,7 @@
- 				      "mmc",
- 				      "output",
- 				      "sample";
--			resets = <&bus_rst 10>;
-+			resets = <&ahb_rst 10>;
- 			reset-names = "ahb";
- 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
-@@ -396,7 +426,7 @@
- 			reg = <0x01c1b000 0x100>;
- 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&bus_gates 25>, <&bus_gates 29>;
--			resets = <&bus_rst 25>, <&bus_rst 29>;
-+			resets = <&ahb_rst 25>, <&ahb_rst 29>;
- 			phys = <&usbphy 1>;
- 			phy-names = "usb";
- 			status = "disabled";
-@@ -408,7 +438,7 @@
- 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&bus_gates 29>, <&bus_gates 25>,
- 				 <&usb_clk 17>;
--			resets = <&bus_rst 29>, <&bus_rst 25>;
-+			resets = <&ahb_rst 29>, <&ahb_rst 25>;
- 			phys = <&usbphy 1>;
- 			phy-names = "usb";
- 			status = "disabled";
-@@ -419,7 +449,7 @@
- 			reg = <0x01c1c000 0x100>;
- 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&bus_gates 26>, <&bus_gates 30>;
--			resets = <&bus_rst 26>, <&bus_rst 30>;
-+			resets = <&ahb_rst 26>, <&ahb_rst 30>;
- 			phys = <&usbphy 2>;
- 			phy-names = "usb";
- 			status = "disabled";
-@@ -431,7 +461,7 @@
- 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&bus_gates 30>, <&bus_gates 26>,
- 				 <&usb_clk 18>;
--			resets = <&bus_rst 30>, <&bus_rst 26>;
-+			resets = <&ahb_rst 30>, <&ahb_rst 26>;
- 			phys = <&usbphy 2>;
- 			phy-names = "usb";
- 			status = "disabled";
-@@ -442,7 +472,7 @@
- 			reg = <0x01c1d000 0x100>;
- 			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&bus_gates 27>, <&bus_gates 31>;
--			resets = <&bus_rst 27>, <&bus_rst 31>;
-+			resets = <&ahb_rst 27>, <&ahb_rst 31>;
- 			phys = <&usbphy 3>;
- 			phy-names = "usb";
- 			status = "disabled";
-@@ -454,7 +484,7 @@
- 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&bus_gates 31>, <&bus_gates 27>,
- 				 <&usb_clk 19>;
--			resets = <&bus_rst 31>, <&bus_rst 27>;
-+			resets = <&ahb_rst 31>, <&ahb_rst 27>;
- 			phys = <&usbphy 3>;
- 			phy-names = "usb";
- 			status = "disabled";
-@@ -469,7 +499,7 @@
- 			gpio-controller;
- 			#gpio-cells = <3>;
- 			interrupt-controller;
--			#interrupt-cells = <2>;
-+			#interrupt-cells = <3>;
- 
- 			uart0_pins_a: uart0@0 {
- 				allwinner,pins = "PA4", "PA5";
-@@ -502,10 +532,22 @@
- 			};
- 		};
- 
--		bus_rst: reset@01c202c0 {
-+		ahb_rst: reset@01c202c0 {
- 			#reset-cells = <1>;
--			compatible = "allwinner,sun8i-h3-bus-reset";
--			reg = <0x01c202c0 0x1c>;
-+			compatible = "allwinner,sun6i-a31-ahb1-reset";
-+			reg = <0x01c202c0 0xc>;
-+		};
-+
-+		apb1_rst: reset@01c202d0 {
-+			#reset-cells = <1>;
-+			compatible = "allwinner,sun6i-a31-clock-reset";
-+			reg = <0x01c202d0 0x4>;
-+		};
-+
-+		apb2_rst: reset@01c202d8 {
-+			#reset-cells = <1>;
-+			compatible = "allwinner,sun6i-a31-clock-reset";
-+			reg = <0x01c202d8 0x4>;
- 		};
- 
- 		timer@01c20c00 {
-@@ -529,7 +571,7 @@
- 			reg-shift = <2>;
- 			reg-io-width = <4>;
- 			clocks = <&bus_gates 112>;
--			resets = <&bus_rst 144>;
-+			resets = <&apb2_rst 16>;
- 			dmas = <&dma 6>, <&dma 6>;
- 			dma-names = "rx", "tx";
- 			status = "disabled";
-@@ -542,7 +584,7 @@
- 			reg-shift = <2>;
- 			reg-io-width = <4>;
- 			clocks = <&bus_gates 113>;
--			resets = <&bus_rst 145>;
-+			resets = <&apb2_rst 17>;
- 			dmas = <&dma 7>, <&dma 7>;
- 			dma-names = "rx", "tx";
- 			status = "disabled";
-@@ -555,7 +597,7 @@
- 			reg-shift = <2>;
- 			reg-io-width = <4>;
- 			clocks = <&bus_gates 114>;
--			resets = <&bus_rst 146>;
-+			resets = <&apb2_rst 18>;
- 			dmas = <&dma 8>, <&dma 8>;
- 			dma-names = "rx", "tx";
- 			status = "disabled";
-@@ -568,7 +610,7 @@
- 			reg-shift = <2>;
- 			reg-io-width = <4>;
- 			clocks = <&bus_gates 115>;
--			resets = <&bus_rst 147>;
-+			resets = <&apb2_rst 19>;
- 			dmas = <&dma 9>, <&dma 9>;
- 			dma-names = "rx", "tx";
- 			status = "disabled";
-@@ -591,5 +633,40 @@
- 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- 		};
-+
-+		apb0_reset: reset@01f014b0 {
-+			reg = <0x01f014b0 0x4>;
-+			compatible = "allwinner,sun6i-a31-clock-reset";
-+			#reset-cells = <1>;
-+		};
-+
-+		ir: ir@01f02000 {
-+			compatible = "allwinner,sun5i-a13-ir";
-+			clocks = <&apb0_gates 1>, <&ir_clk>;
-+			clock-names = "apb", "ir";
-+			resets = <&apb0_reset 1>;
-+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+			reg = <0x01f02000 0x40>;
-+			status = "disabled";
-+		};
-+
-+		r_pio: pinctrl@01f02c00 {
-+			compatible = "allwinner,sun8i-h3-r-pinctrl";
-+			reg = <0x01f02c00 0x400>;
-+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&apb0_gates 0>;
-+			resets = <&apb0_reset 0>;
-+			gpio-controller;
-+			#gpio-cells = <3>;
-+			interrupt-controller;
-+			#interrupt-cells = <3>;
-+
-+			ir_pins_a: ir@0 {
-+				allwinner,pins = "PL11";
-+				allwinner,function = "s_cir_rx";
-+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+			};
-+		};
- 	};
- };
---- a/arch/arm/dts/sun8i-q8-common.dtsi
-+++ b/arch/arm/dts/sun8i-q8-common.dtsi
-@@ -41,11 +41,23 @@
-  */
- #include "sunxi-q8-common.dtsi"
- 
-+#include <dt-bindings/pwm/pwm.h>
-+
- / {
- 	aliases {
- 		serial0 = &r_uart;
- 	};
- 
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bl_en_pin_q8>;
-+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+		default-brightness-level = <8>;
-+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-@@ -54,7 +66,7 @@
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
--	vmmc-supply = <&reg_vcc3v0>;
-+	vmmc-supply = <&reg_dcdc1>;
- 	bus-width = <4>;
- 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- 	cd-inverted;
-@@ -77,8 +89,90 @@
- 	};
- };
- 
-+&r_rsb {
-+	status = "okay";
-+
-+	axp22x: pmic@3a3 {
-+		compatible = "x-powers,axp223";
-+		reg = <0x3a3>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		eldoin-supply = <&reg_dcdc1>;
-+	};
-+};
-+
-+#include "axp22x.dtsi"
-+
-+&reg_aldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-io";
-+};
-+
-+&reg_aldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2350000>;
-+	regulator-max-microvolt = <2650000>;
-+	regulator-name = "vdd-dll";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dc1sw {
-+	regulator-name = "vcc-lcd";
-+};
-+
-+&reg_dc5ldo {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-3v0";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-sys";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <900000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_rtc_ldo {
-+	regulator-name = "vcc-rtc";
-+};
-+
- &r_uart {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&r_uart_pins_a>;
- 	status = "okay";
- };
-+
-+&simplefb_lcd {
-+	vcc-lcd-supply = <&reg_dc1sw>;
-+};
---- a/arch/arm/dts/sun9i-a80-cubieboard4.dts
-+++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts
-@@ -62,9 +62,31 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&led_pins_cubieboard4>;
-+
-+		green {
-+			label = "cubieboard4:green:usr";
-+			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
-+		};
-+
-+		red {
-+			label = "cubieboard4:red:usr";
-+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+		};
-+	};
- };
- 
- &pio {
-+	led_pins_cubieboard4: led-pins@0 {
-+		allwinner,pins = "PH6", "PH17";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
- 	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
- 		allwinner,pins = "PH18";
- 		allwinner,function = "gpio_in";
-@@ -89,6 +111,20 @@
- 	vmmc-supply = <&reg_vcc3v0>;
- 	bus-width = <8>;
- 	non-removable;
-+	cap-mmc-hw-reset;
-+	status = "okay";
-+};
-+
-+&mmc2_8bit_pins {
-+	/* Increase drive strength for DDR modes */
-+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-+};
-+
-+&r_ir {
-+	status = "okay";
-+};
-+
-+&r_rsb {
- 	status = "okay";
- };
- 
---- a/arch/arm/dts/sun9i-a80-optimus.dts
-+++ b/arch/arm/dts/sun9i-a80-optimus.dts
-@@ -65,7 +65,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 		pinctrl-names = "default";
--		pinctrl-0 = <&led_pins_optimus>;
-+		pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
- 
- 		/* The LED names match those found on the board */
- 
-@@ -74,7 +74,10 @@
- 			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		/* led3 is on PM15, in R_PIO */
-+		led3 {
-+			label = "optimus:led3:usr";
-+			gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
-+		};
- 
- 		led4 {
- 			label = "optimus:led4:usr";
-@@ -106,17 +109,6 @@
- 	status = "okay";
- };
- 
--&i2c3 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&i2c3_pins_a>;
--	status = "okay";
--};
--
--&i2c3_pins_a {
--	/* Enable internal pull-up */
--	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
--};
--
- &ohci0 {
- 	status = "okay";
- };
-@@ -171,30 +163,42 @@
- 	vmmc-supply = <&reg_vcc3v0>;
- 	bus-width = <8>;
- 	non-removable;
-+	cap-mmc-hw-reset;
- 	status = "okay";
- };
- 
-+&mmc2_8bit_pins {
-+	/* Increase drive strength for DDR modes */
-+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-+};
-+
- &reg_usb1_vbus {
- 	pinctrl-0 = <&usb1_vbus_pin_optimus>;
- 	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- 	status = "okay";
- };
- 
--&uart0 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+&r_ir {
- 	status = "okay";
- };
- 
--&uart4 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&uart4_pins_a>;
-+&r_pio {
-+	led_r_pins_optimus: led-pins@1 {
-+		allwinner,pins = "PM15";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
-+&r_rsb {
- 	status = "okay";
- };
- 
--&uart4_pins_a {
--	/* Enable internal pull-up */
--	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_a>;
-+	status = "okay";
- };
- 
- &usbphy1 {
---- a/arch/arm/dts/sun9i-a80.dtsi
-+++ b/arch/arm/dts/sun9i-a80.dtsi
-@@ -128,6 +128,17 @@
- 		 */
- 		ranges = <0 0 0 0x20000000>;
- 
-+		/*
-+		 * This clock is actually configurable from the PRCM address
-+		 * space. The external 24M oscillator can be turned off, and
-+		 * the clock switched to an internal 16M RC oscillator. Under
-+		 * normal operation there's no reason to do this, and the
-+		 * default is to use the external good one, so just model this
-+		 * as a fixed clock. Also it is not entirely clear if the
-+		 * osc24M mux in the PRCM affects the entire clock tree, which
-+		 * would also throw all the PLL clock rates off, or just the
-+		 * downstream clocks in the PRCM.
-+		 */
- 		osc24M: osc24M_clk {
- 			#clock-cells = <0>;
- 			compatible = "fixed-clock";
-@@ -135,6 +146,13 @@
- 			clock-output-names = "osc24M";
- 		};
- 
-+		/*
-+		 * The 32k clock is from an external source, normally the
-+		 * AC100 codec/RTC chip. This clock is by default enabled
-+		 * and clocked at 32768 Hz, from the oscillator connected
-+		 * to the AC100. It is configurable, but no such driver or
-+		 * bindings exist yet.
-+		 */
- 		osc32k: osc32k_clk {
- 			#clock-cells = <0>;
- 			compatible = "fixed-clock";
-@@ -164,6 +182,14 @@
- 					     "usb_phy2", "usb_hsic_12M";
- 		};
- 
-+		pll3: clk@06000008 {
-+			/* placeholder until implemented */
-+			#clock-cells = <0>;
-+			compatible = "fixed-clock";
-+			clock-rate = <0>;
-+			clock-output-names = "pll3";
-+		};
-+
- 		pll4: clk@0600000c {
- 			#clock-cells = <0>;
- 			compatible = "allwinner,sun9i-a80-pll4-clk";
-@@ -277,9 +303,12 @@
- 			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
- 			reg = <0x06000580 0x4>;
- 			clocks = <&ahb0>;
--			clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
--					<14>, <15>, <16>, <18>, <20>, <21>,
--					<22>, <23>;
-+			clock-indices = <0>, <1>, <3>,
-+					<5>, <8>, <12>,
-+					<13>, <14>,
-+					<15>, <16>, <18>,
-+					<20>, <21>, <22>,
-+					<23>;
- 			clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
- 					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
- 					"ahb0_nand0", "ahb0_sdram",
-@@ -293,7 +322,10 @@
- 			compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
- 			reg = <0x06000584 0x4>;
- 			clocks = <&ahb1>;
--			clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
-+			clock-indices = <0>, <1>,
-+					<17>, <21>,
-+					<22>, <23>,
-+					<24>;
- 			clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
- 					"ahb1_gmac", "ahb1_msgbox",
- 					"ahb1_spinlock", "ahb1_hstimer",
-@@ -305,8 +337,9 @@
- 			compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
- 			reg = <0x06000588 0x4>;
- 			clocks = <&ahb2>;
--			clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
--					<11>;
-+			clock-indices = <0>, <1>,
-+					<2>, <4>, <5>,
-+					<7>, <8>, <11>;
- 			clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
- 					"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
- 					"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
-@@ -317,8 +350,10 @@
- 			compatible = "allwinner,sun9i-a80-apb0-gates-clk";
- 			reg = <0x06000590 0x4>;
- 			clocks = <&apb0>;
--			clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
--					<17>, <18>, <19>;
-+			clock-indices = <1>, <5>,
-+					<11>, <12>, <13>,
-+					<15>, <17>, <18>,
-+					<19>;
- 			clock-output-names = "apb0_spdif", "apb0_pio",
- 					"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- 					"apb0_lradc", "apb0_gpadc", "apb0_twd",
-@@ -330,14 +365,79 @@
- 			compatible = "allwinner,sun9i-a80-apb1-gates-clk";
- 			reg = <0x06000594 0x4>;
- 			clocks = <&apb1>;
--			clock-indices = <0>, <1>, <2>, <3>, <4>,
--					<16>, <17>, <18>, <19>, <20>, <21>;
-+			clock-indices = <0>, <1>,
-+					<2>, <3>, <4>,
-+					<16>, <17>,
-+					<18>, <19>,
-+					<20>, <21>;
- 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
- 					"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
- 					"apb1_uart0", "apb1_uart1",
- 					"apb1_uart2", "apb1_uart3",
- 					"apb1_uart4", "apb1_uart5";
- 		};
-+
-+		cpus_clk: clk@08001410 {
-+			compatible = "allwinner,sun9i-a80-cpus-clk";
-+			reg = <0x08001410 0x4>;
-+			#clock-cells = <0>;
-+			clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
-+			clock-output-names = "cpus";
-+		};
-+
-+		ahbs: ahbs_clk {
-+			compatible = "fixed-factor-clock";
-+			#clock-cells = <0>;
-+			clock-div = <1>;
-+			clock-mult = <1>;
-+			clocks = <&cpus_clk>;
-+			clock-output-names = "ahbs";
-+		};
-+
-+		apbs: clk@0800141c {
-+			compatible = "allwinner,sun8i-a23-apb0-clk";
-+			reg = <0x0800141c 0x4>;
-+			#clock-cells = <0>;
-+			clocks = <&ahbs>;
-+			clock-output-names = "apbs";
-+		};
-+
-+		apbs_gates: clk@08001428 {
-+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
-+			reg = <0x08001428 0x4>;
-+			#clock-cells = <1>;
-+			clocks = <&apbs>;
-+			clock-indices = <0>, <1>,
-+					<2>, <3>,
-+					<4>, <5>,
-+					<6>, <7>,
-+					<12>, <13>,
-+					<16>, <17>,
-+					<18>, <20>;
-+			clock-output-names = "apbs_pio", "apbs_ir",
-+					"apbs_timer", "apbs_rsb",
-+					"apbs_uart", "apbs_1wire",
-+					"apbs_i2c0", "apbs_i2c1",
-+					"apbs_ps2_0", "apbs_ps2_1",
-+					"apbs_dma", "apbs_i2s0",
-+					"apbs_i2s1", "apbs_twd";
-+		};
-+
-+		r_1wire_clk: clk@08001450 {
-+			reg = <0x08001450 0x4>;
-+			#clock-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-mod0-clk";
-+			clocks = <&osc32k>, <&osc24M>;
-+			clock-output-names = "r_1wire";
-+		};
-+
-+		r_ir_clk: clk@08001454 {
-+			reg = <0x08001454 0x4>;
-+			#clock-cells = <0>;
-+			compatible = "allwinner,sun4i-a10-mod0-clk";
-+			clocks = <&osc32k>, <&osc24M>;
-+			clock-output-names = "r_ir";
-+		};
- 	};
- 
- 	soc {
-@@ -443,7 +543,7 @@
- 		};
- 
- 		mmc0: mmc@01c0f000 {
--			compatible = "allwinner,sun5i-a13-mmc";
-+			compatible = "allwinner,sun9i-a80-mmc";
- 			reg = <0x01c0f000 0x1000>;
- 			clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
- 				 <&mmc0_clk 1>, <&mmc0_clk 2>;
-@@ -457,7 +557,7 @@
- 		};
- 
- 		mmc1: mmc@01c10000 {
--			compatible = "allwinner,sun5i-a13-mmc";
-+			compatible = "allwinner,sun9i-a80-mmc";
- 			reg = <0x01c10000 0x1000>;
- 			clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
- 				 <&mmc1_clk 1>, <&mmc1_clk 2>;
-@@ -471,7 +571,7 @@
- 		};
- 
- 		mmc2: mmc@01c11000 {
--			compatible = "allwinner,sun5i-a13-mmc";
-+			compatible = "allwinner,sun9i-a80-mmc";
- 			reg = <0x01c11000 0x1000>;
- 			clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
- 				 <&mmc2_clk 1>, <&mmc2_clk 2>;
-@@ -485,7 +585,7 @@
- 		};
- 
- 		mmc3: mmc@01c12000 {
--			compatible = "allwinner,sun5i-a13-mmc";
-+			compatible = "allwinner,sun9i-a80-mmc";
- 			reg = <0x01c12000 0x1000>;
- 			clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
- 				 <&mmc3_clk 1>, <&mmc3_clk 2>;
-@@ -582,7 +682,7 @@
- 			clocks = <&apb0_gates 5>;
- 			gpio-controller;
- 			interrupt-controller;
--			#interrupt-cells = <2>;
-+			#interrupt-cells = <3>;
- 			#size-cells = <0>;
- 			#gpio-cells = <3>;
- 
-@@ -604,7 +704,8 @@
- 			mmc2_8bit_pins: mmc2_8bit {
- 				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
- 						 "PC10", "PC11", "PC12",
--						 "PC13", "PC14", "PC15";
-+						 "PC13", "PC14", "PC15",
-+						 "PC16";
- 				allwinner,function = "mmc2";
- 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-@@ -752,14 +853,83 @@
- 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- 		};
- 
-+		apbs_rst: reset@080014b0 {
-+			reg = <0x080014b0 0x4>;
-+			compatible = "allwinner,sun6i-a31-clock-reset";
-+			#reset-cells = <1>;
-+		};
-+
-+		nmi_intc: interrupt-controller@080015a0 {
-+			compatible = "allwinner,sun9i-a80-nmi";
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+			reg = <0x080015a0 0xc>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		r_ir: ir@08002000 {
-+			compatible = "allwinner,sun5i-a13-ir";
-+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&r_ir_pins>;
-+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
-+			clock-names = "apb", "ir";
-+			resets = <&apbs_rst 1>;
-+			reg = <0x08002000 0x40>;
-+			status = "disabled";
-+		};
-+
- 		r_uart: serial@08002800 {
- 			compatible = "snps,dw-apb-uart";
- 			reg = <0x08002800 0x400>;
- 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- 			reg-shift = <2>;
- 			reg-io-width = <4>;
--			clocks = <&osc24M>;
-+			clocks = <&apbs_gates 4>;
-+			resets = <&apbs_rst 4>;
- 			status = "disabled";
- 		};
-+
-+		r_pio: pinctrl@08002c00 {
-+			compatible = "allwinner,sun9i-a80-r-pinctrl";
-+			reg = <0x08002c00 0x400>;
-+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&apbs_gates 0>;
-+			resets = <&apbs_rst 0>;
-+			gpio-controller;
-+			interrupt-controller;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			#gpio-cells = <3>;
-+
-+			r_ir_pins: r_ir {
-+				allwinner,pins = "PL6";
-+				allwinner,function = "s_cir_rx";
-+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+			};
-+
-+			r_rsb_pins: r_rsb {
-+				allwinner,pins = "PN0", "PN1";
-+				allwinner,function = "s_rsb";
-+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+			};
-+		};
-+
-+		r_rsb: i2c@08003400 {
-+			compatible = "allwinner,sun8i-a23-rsb";
-+			reg = <0x08003400 0x400>;
-+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&apbs_gates 3>;
-+			clock-frequency = <3000000>;
-+			resets = <&apbs_rst 3>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&r_rsb_pins>;
-+			status = "disabled";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
- 	};
- };
---- /dev/null
-+++ b/arch/arm/dts/sunxi-itead-core-common.dtsi
-@@ -0,0 +1,136 @@
-+/*
-+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sunxi-common-regulators.dtsi"
-+
-+/ {
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins_a>;
-+	status = "okay";
-+
-+	axp209: pmic@34 {
-+		reg = <0x34>;
-+	};
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins_a>;
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+#include "axp209.dtsi"
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-cpu";
-+};
-+
-+&reg_dcdc3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "vdd-int-dll";
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "vdd-rtc";
-+};
-+
-+&reg_ldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "avcc";
-+};
-+
-+&reg_usb1_vbus {
-+	status = "okay";
-+};
-+
-+&reg_usb2_vbus {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_a>;
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	usb2_vbus-supply = <&reg_usb2_vbus>;
-+	status = "okay";
-+};
---- a/arch/arm/dts/sunxi-q8-common.dtsi
-+++ b/arch/arm/dts/sunxi-q8-common.dtsi
-@@ -75,3 +75,9 @@
- 		voltage = <400000>;
- 	};
- };
-+
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_pins>;
-+	status = "okay";
-+};
diff --git a/package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch b/package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch
deleted file mode 100644
index 45416703a4..0000000000
--- a/package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch
+++ /dev/null
@@ -1,38 +0,0 @@ 
-From 730d2f3a41c5ccae71b5008fffdf697d143be68c Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 16 Mar 2016 20:44:51 +0100
-Subject: [PATCH] sunxi: Fix clock_twi_onoff for sun6i
-
-The clock_sun6i.c implementation was not deasserting the reset for
-the regular i2c controllers, this commit fixes this.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-@@ -100,13 +100,18 @@ int clock_twi_onoff(int port, int state)
- 		return 0;
- 	}
- 
--	/* set the apb clock gate for twi */
--	if (state)
-+	/* set the apb clock gate and reset for twi */
-+	if (state) {
- 		setbits_le32(&ccm->apb2_gate,
- 			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
--	else
-+		setbits_le32(&ccm->apb2_reset_cfg,
-+			     1 << (APB2_RESET_TWI_SHIFT + port));
-+	} else {
-+		clrbits_le32(&ccm->apb2_reset_cfg,
-+			     1 << (APB2_RESET_TWI_SHIFT + port));
- 		clrbits_le32(&ccm->apb2_gate,
- 			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
-+	}
- 
- 	return 0;
- }
diff --git a/package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch b/package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch
deleted file mode 100644
index 47f825c570..0000000000
--- a/package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch
+++ /dev/null
@@ -1,24 +0,0 @@ 
-From 1eae8f66ff749409eb96e2f3f3387c56232d0b8a Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 16 Mar 2016 13:46:22 +0100
-Subject: [PATCH] sunxi: Enable realtek phy support
-
-Enable building of drivers/net/phy/realtek.c so that realtek phys
-get properly initialized.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- include/configs/sunxi-common.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/configs/sunxi-common.h
-+++ b/include/configs/sunxi-common.h
-@@ -314,6 +314,7 @@ extern int soft_i2c_gpio_scl;
- #define CONFIG_PHY_GIGE			/* GMAC can use gigabit PHY	*/
- #define CONFIG_PHY_ADDR		1
- #define CONFIG_MII			/* MII PHY management		*/
-+#define CONFIG_PHY_REALTEK
- #endif
- 
- #ifdef CONFIG_USB_EHCI_HCD
diff --git a/package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch b/package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch
deleted file mode 100644
index cf511ce773..0000000000
--- a/package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch
+++ /dev/null
@@ -1,127 +0,0 @@ 
-From fc8991c61c393ce6a9d3dfc97cb56dbbd9e8cbba Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 17 Mar 2016 13:53:03 +0100
-Subject: [PATCH] sunxi: Fix gmac not working due to cpu_eth_init no longer
- being called
-
-cpu_eth_init is no longer called for dm enabled eth drivers, this
-was causing the sunxi gmac eth controller to no longer work in u-boot.
-
-This commit fixes this by calling the clock, reset and pinmux setup
-function from s_init() and enabling the phy power pin (if any) from
-board_init().
-
-The enabling of phy power cannot be done from s_init because it uses dm
-and dm is not ready yet at this point.
-
-Note that the mdelay is dropped as the phy gets enabled much earlier
-now, so it is no longer needed.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
-Tested-by: Karsten Merker <merker@debian.org>
-Tested-by: Michael Haas <haas@computerlinguist.org>
----
- arch/arm/cpu/armv7/sunxi/board.c            | 28 +---------------------------
- arch/arm/include/asm/arch-sunxi/sys_proto.h |  6 +++++-
- board/sunxi/board.c                         |  5 +++++
- board/sunxi/gmac.c                          | 14 +-------------
- 4 files changed, 12 insertions(+), 41 deletions(-)
-
---- a/arch/arm/cpu/armv7/sunxi/board.c
-+++ b/arch/arm/cpu/armv7/sunxi/board.c
-@@ -136,6 +136,7 @@ void s_init(void)
- 	timer_init();
- 	gpio_init();
- 	i2c_init_board();
-+	eth_init_board();
- }
- 
- #ifdef CONFIG_SPL_BUILD
-@@ -243,30 +244,3 @@ void enable_caches(void)
- 	dcache_enable();
- }
- #endif
--
--#ifdef CONFIG_CMD_NET
--/*
-- * Initializes on-chip ethernet controllers.
-- * to override, implement board_eth_init()
-- */
--int cpu_eth_init(bd_t *bis)
--{
--	__maybe_unused int rc;
--
--#ifdef CONFIG_MACPWR
--	gpio_request(CONFIG_MACPWR, "macpwr");
--	gpio_direction_output(CONFIG_MACPWR, 1);
--	mdelay(200);
--#endif
--
--#ifdef CONFIG_SUNXI_GMAC
--	rc = sunxi_gmac_initialize(bis);
--	if (rc < 0) {
--		printf("sunxi: failed to initialize gmac\n");
--		return rc;
--	}
--#endif
--
--	return 0;
--}
--#endif
---- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
-+++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
-@@ -24,6 +24,10 @@ void sdelay(unsigned long);
- void return_to_fel(uint32_t lr, uint32_t sp);
- 
- /* Board / SoC level designware gmac init */
--int sunxi_gmac_initialize(bd_t *bis);
-+#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUNXI_GMAC
-+void eth_init_board(void);
-+#else
-+static inline void eth_init_board(void) {}
-+#endif
- 
- #endif
---- a/board/sunxi/board.c
-+++ b/board/sunxi/board.c
-@@ -90,6 +90,11 @@ int board_init(void)
- 	if (ret)
- 		return ret;
- 
-+#ifdef CONFIG_MACPWR
-+	gpio_request(CONFIG_MACPWR, "macpwr");
-+	gpio_direction_output(CONFIG_MACPWR, 1);
-+#endif
-+
- 	/* Uses dm gpio code so do this here and not in i2c_init_board() */
- 	return soft_i2c_board_init();
- }
---- a/board/sunxi/gmac.c
-+++ b/board/sunxi/gmac.c
-@@ -6,7 +6,7 @@
- #include <asm/arch/clock.h>
- #include <asm/arch/gpio.h>
- 
--int sunxi_gmac_initialize(bd_t *bis)
-+void eth_init_board(void)
- {
- 	int pin;
- 	struct sunxi_ccm_reg *const ccm =
-@@ -79,16 +79,4 @@ int sunxi_gmac_initialize(bd_t *bis)
- 	for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++)
- 		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
- #endif
--
--#ifdef CONFIG_DM_ETH
--	return 0;
--#else
--# ifdef CONFIG_RGMII
--	return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
--# elif defined CONFIG_GMII
--	return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_GMII);
--# else
--	return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
--# endif
--#endif
- }
diff --git a/package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch b/package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch
deleted file mode 100644
index 95a77c68d6..0000000000
--- a/package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch
+++ /dev/null
@@ -1,78 +0,0 @@ 
-From 948603d4d637a0e04a3214253b911cfc4ed11220 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 21 Mar 2016 14:44:35 +0100
-Subject: [PATCH] sunxi: Fix 2nd usb controller on sun4i/sun7i no longer
- working
-
-The 2nd usb controller on sun4i/sun7i has its base address 0x8000
-bytes from the 1st one, rather then 0x1000. Also the ahb clk gates
-are interleaved with the ohci clk-gates introducing a hole between
-the clks for usb1 and usb2.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- drivers/usb/host/ehci-sunxi.c | 13 +++++++++++--
- drivers/usb/host/ohci-sunxi.c | 15 ++++++++++++---
- 2 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/drivers/usb/host/ehci-sunxi.c
-+++ b/drivers/usb/host/ehci-sunxi.c
-@@ -17,6 +17,14 @@
- #include <dm.h>
- #include "ehci.h"
- 
-+#ifdef CONFIG_SUNXI_GEN_SUN4I
-+#define BASE_DIST		0x8000
-+#define AHB_CLK_DIST		2
-+#else
-+#define BASE_DIST		0x1000
-+#define AHB_CLK_DIST		1
-+#endif
-+
- struct ehci_sunxi_priv {
- 	struct ehci_ctrl ehci;
- 	int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
-@@ -39,8 +47,9 @@ static int ehci_usb_probe(struct udevice
- #ifdef CONFIG_MACH_SUN8I_H3
- 	priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_OHCI0;
- #endif
--	priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / 0x1000 + 1;
--	priv->ahb_gate_mask <<= priv->phy_index - 1;
-+	priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / BASE_DIST;
-+	priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
-+	priv->phy_index++; /* Non otg phys start at 1 */
- 
- 	setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
- #ifdef CONFIG_SUNXI_GEN_SUN6I
---- a/drivers/usb/host/ohci-sunxi.c
-+++ b/drivers/usb/host/ohci-sunxi.c
-@@ -17,6 +17,14 @@
- #include <usb.h>
- #include "ohci.h"
- 
-+#ifdef CONFIG_SUNXI_GEN_SUN4I
-+#define BASE_DIST		0x8000
-+#define AHB_CLK_DIST		2
-+#else
-+#define BASE_DIST		0x1000
-+#define AHB_CLK_DIST		1
-+#endif
-+
- struct ohci_sunxi_priv {
- 	ohci_t ohci;
- 	int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
-@@ -42,9 +50,10 @@ static int ohci_usb_probe(struct udevice
- 	priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_EHCI0;
- #endif
- 	priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
--	priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / 0x1000 + 1;
--	priv->ahb_gate_mask <<= priv->phy_index - 1;
--	priv->usb_gate_mask <<= priv->phy_index - 1;
-+	priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST;
-+	priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
-+	priv->usb_gate_mask <<= priv->phy_index;
-+	priv->phy_index++; /* Non otg phys start at 1 */
- 
- 	setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
- 	setbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
diff --git a/package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch b/package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch
deleted file mode 100644
index 04a2af72ee..0000000000
--- a/package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch
+++ /dev/null
@@ -1,31 +0,0 @@ 
-From 8f10b5c65611e6c15a113bf63289b6696452f90d Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sun, 20 Mar 2016 14:17:10 +0100
-Subject: [PATCH] spl: Print from which mmc slot spl is trying to boot
-
-On some sunxi boards (and presumably also non sunxi boards) u-boot can
-be either loaded from a sdcard in a micro-sd slot, or from eMMC.
-
-Print which MMC spl tries to boot from, to help debugging.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Reviewed-by: Tom Rini <trini@konsulko.com>
----
- common/spl/spl.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/common/spl/spl.c
-+++ b/common/spl/spl.c
-@@ -210,9 +210,9 @@ struct boot_device_name boot_name_table[
- 	{ BOOT_DEVICE_RAM, "RAM" },
- #endif
- #ifdef CONFIG_SPL_MMC_SUPPORT
--	{ BOOT_DEVICE_MMC1, "MMC" },
--	{ BOOT_DEVICE_MMC2, "MMC" },
--	{ BOOT_DEVICE_MMC2_2, "MMC" },
-+	{ BOOT_DEVICE_MMC1, "MMC1" },
-+	{ BOOT_DEVICE_MMC2, "MMC2" },
-+	{ BOOT_DEVICE_MMC2_2, "MMC2_2" },
- #endif
- #ifdef CONFIG_SPL_NAND_SUPPORT
- 	{ BOOT_DEVICE_NAND, "NAND" },
diff --git a/package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch b/package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch
deleted file mode 100644
index 098fe72035..0000000000
--- a/package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch
+++ /dev/null
@@ -1,39 +0,0 @@ 
-From 60fa63012fcdc3c4ec1497bf5e358f0a90b40949 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 18 Mar 2016 08:42:01 +0100
-Subject: [PATCH] sunxi: Add support for USB vbus pin for USB3
-
-The H3 has USB0 - USB3, add support for having a USB vbus pin for USB3.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- arch/arm/cpu/armv7/sunxi/usb_phy.c | 1 +
- board/sunxi/Kconfig                | 6 ++++++
- 2 files changed, 7 insertions(+)
-
---- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
-+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
-@@ -76,6 +76,7 @@ static int get_vbus_gpio(int index)
- 	case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
- 	case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
- 	case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
-+	case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
- 	}
- 	return -EINVAL;
- }
---- a/board/sunxi/Kconfig
-+++ b/board/sunxi/Kconfig
-@@ -341,6 +341,12 @@ config USB2_VBUS_PIN
- 	---help---
- 	See USB1_VBUS_PIN help text.
- 
-+config USB3_VBUS_PIN
-+	string "Vbus enable pin for usb3 (ehci2)"
-+	default ""
-+	---help---
-+	See USB1_VBUS_PIN help text.
-+
- config I2C0_ENABLE
- 	bool "Enable I2C/TWI controller 0"
- 	default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
diff --git a/package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch b/package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch
deleted file mode 100644
index a216bc9f11..0000000000
--- a/package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch
+++ /dev/null
@@ -1,31 +0,0 @@ 
-From ce0d0926758f631fdd655d438acd32d5935d43a4 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 18 Mar 2016 08:45:21 +0100
-Subject: [PATCH] sunxi: Specify USB vbus pins for orangepi boards
-
-This fixes the USB ports not working on the orangepi_plus and stops us
-from messing with gpio-s which we should not touch on the orangepi_pc.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- configs/orangepi_pc_defconfig   | 3 +++
- configs/orangepi_plus_defconfig | 1 +
- 2 files changed, 4 insertions(+)
-
---- a/configs/orangepi_pc_defconfig
-+++ b/configs/orangepi_pc_defconfig
-@@ -14,3 +14,6 @@ CONFIG_SPL=y
- CONFIG_CMD_GPIO=y
- CONFIG_SY8106A_POWER=y
- CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB1_VBUS_PIN=""
-+CONFIG_USB2_VBUS_PIN=""
-+CONFIG_USB3_VBUS_PIN=""
---- a/configs/orangepi_plus_defconfig
-+++ b/configs/orangepi_plus_defconfig
-@@ -14,3 +14,4 @@ CONFIG_SPL=y
- CONFIG_CMD_GPIO=y
- CONFIG_SY8106A_POWER=y
- CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB1_VBUS_PIN="PG13"
diff --git a/package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch b/package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch
deleted file mode 100644
index e7b8cd73df..0000000000
--- a/package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch
+++ /dev/null
@@ -1,33 +0,0 @@ 
-From 70fe24ed93fa90eb407d18a5fc9d9ad85ac9184c Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Wed, 27 Jan 2016 16:34:43 +0800
-Subject: [PATCH] sunxi: Support SID e-fuses on A83T and H3
-
-On the A83T and H3, the SID block is at a different address.
-Furthurmore, the e-fuses are at an offset of 0x200 within the
-hardware's address space.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
-+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
-@@ -82,7 +82,14 @@
- #define SUNXI_AD_DA_BASE		0x01c22c00
- #define SUNXI_KEYPAD_BASE		0x01c23000
- #define SUNXI_TZPC_BASE			0x01c23400
-+
-+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3)
-+/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
-+#define SUNXI_SID_BASE			0x01c14200
-+#else
- #define SUNXI_SID_BASE			0x01c23800
-+#endif
-+
- #define SUNXI_SJTAG_BASE		0x01c23c00
- 
- #define SUNXI_TP_BASE			0x01c25000
diff --git a/package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch b/package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch
deleted file mode 100644
index d49fc97373..0000000000
--- a/package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch
+++ /dev/null
@@ -1,23 +0,0 @@ 
-From 2af25b747340c6c8f6a6b9e27632db577bf4da52 Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 22 Feb 2016 22:55:46 -0700
-Subject: [PATCH] sunxi: Display the board model on start-up
-
-It is useful to know which sunxi board you are booting. Display this on
-start-up to avoid confusion.
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
----
- include/configs/sunxi-common.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/configs/sunxi-common.h
-+++ b/include/configs/sunxi-common.h
-@@ -174,6 +174,7 @@
- 
- #define CONFIG_SYS_MONITOR_LEN		(768 << 10)	/* 768 KiB */
- #define CONFIG_IDENT_STRING		" Allwinner Technology"
-+#define CONFIG_DISPLAY_BOARDINFO
- 
- #define CONFIG_ENV_OFFSET		(544 << 10) /* (8 + 24 + 512) KiB */
- #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
diff --git a/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch b/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch
index a402feb3cd..40d79878ad 100644
--- a/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch
+++ b/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch
@@ -12,9 +12,9 @@  More specifically, the following settings are now used:
  * up to 1152MHz: mul=3, div=2 (unchanged)
  * above 1152MHz: mul=4, div=2 (was: mul=2, div=1)
 
---- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-@@ -122,11 +122,12 @@ void clock_set_pll1(unsigned int clk)
+--- a/arch/arm/mach-sunxi/clock_sun6i.c
++++ b/arch/arm/mach-sunxi/clock_sun6i.c
+@@ -107,11 +107,12 @@ void clock_set_pll1(unsigned int clk)
  	struct sunxi_ccm_reg * const ccm =
  		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
  	const int p = 0;
diff --git a/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch b/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch
index d200633bc2..a8e03e2fb2 100644
--- a/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch
+++ b/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch
@@ -16,9 +16,9 @@  order of magnitude as Boot1.
 Furthermore, a bit of documentation is added to clarify that the
 required setting for the PLL LDO is 1.37v as per the A31 manual.
 
---- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-@@ -24,14 +24,27 @@ void clock_init_safe(void)
+--- a/arch/arm/mach-sunxi/clock_sun6i.c
++++ b/arch/arm/mach-sunxi/clock_sun6i.c
+@@ -26,13 +26,26 @@ void clock_init_safe(void)
  	struct sunxi_prcm_reg * const prcm =
  		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
  
@@ -34,9 +34,9 @@  required setting for the PLL LDO is 1.37v as per the A31 manual.
  	clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
  		PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
 -		PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
-+		PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370) );
++		PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370));
  	clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
- 
++
 +	/* Give the PLL LDO voltage setting some time to take hold.
 +	 * Notes:
 +	 *   1) We need to use sdelay() as the timers aren't set up yet.
@@ -44,10 +44,9 @@  required setting for the PLL LDO is 1.37v as per the A31 manual.
 +	 *      iterations through a loop.
 +	 */
 +	sdelay(100000);
-+
- 	clock_set_pll1(408000000);
+ #endif
  
- 	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+ #if defined(CONFIG_MACH_SUN8I_R40) || defined(CONFIG_MACH_SUN50I)
 --- a/arch/arm/include/asm/arch-sunxi/prcm.h
 +++ b/arch/arm/include/asm/arch-sunxi/prcm.h
 @@ -111,13 +111,13 @@
diff --git a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch
index bf5dc66e1a..8bab220518 100644
--- a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch
+++ b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch
@@ -6,11 +6,11 @@  Subject: sun6i: define alternate-function for UART2 on GPG
 
 --- a/arch/arm/include/asm/arch-sunxi/gpio.h
 +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -180,6 +180,7 @@ enum sunxi_gpio_number {
+@@ -186,6 +186,7 @@ enum sunxi_gpio_number {
  #define SUN6I_GPG_SDC1		2
  #define SUN8I_GPG_SDC1		2
  #define SUN6I_GPG_TWI3		2
 +#define SUN6I_GPG_UART2         2
  #define SUN5I_GPG_UART1		4
  
- #define SUN4I_GPH_SDC1		5
+ #define SUN6I_GPH_PWM		2
diff --git a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch
index 087074d0c9..d140f2d538 100644
--- a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch
+++ b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch
@@ -4,9 +4,9 @@  Date: Tue, 16 Jun 2015 10:53:11 +0200
 Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
 
 
---- a/arch/arm/cpu/armv7/sunxi/board.c
-+++ b/arch/arm/cpu/armv7/sunxi/board.c
-@@ -88,6 +88,10 @@ static int gpio_init(void)
+--- a/arch/arm/mach-sunxi/board.c
++++ b/arch/arm/mach-sunxi/board.c
+@@ -126,6 +126,10 @@ static int gpio_init(void)
  	sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
  	sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
  	sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
@@ -19,7 +19,7 @@  Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
  	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
 --- a/include/configs/sunxi-common.h
 +++ b/include/configs/sunxi-common.h
-@@ -260,6 +260,8 @@ extern int soft_i2c_gpio_scl;
+@@ -259,6 +259,8 @@ extern int soft_i2c_gpio_scl;
  #endif
  #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
  #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28400:115200"
diff --git a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch
index ee1e3c9bfa..41039796a0 100644
--- a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch
+++ b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch
@@ -4,9 +4,9 @@  Date: Tue, 16 Jun 2015 10:59:38 +0200
 Subject: ARM: sunxi: Make CONS_INDEX configurable
 
 
---- a/board/sunxi/Kconfig
-+++ b/board/sunxi/Kconfig
-@@ -229,6 +229,14 @@ config SYS_BOARD
+--- a/arch/arm/mach-sunxi/Kconfig
++++ b/arch/arm/mach-sunxi/Kconfig
+@@ -412,6 +412,14 @@ config SYS_BOARD
  config SYS_SOC
  	default "sunxi"