diff mbox

[v4,3/3] power: wm831x_power: Support USB charger current limit management

Message ID b25c3a5e595716c701091d848188585dbd95bb20.1501132173.git.baolin.wang@linaro.org
State Changes Requested, archived
Headers show

Commit Message

Baolin Wang July 27, 2017, 5:14 a.m. UTC 
Integrate with the newly added USB charger interface to limit the current
we draw from the USB input based on the input device configuration
identified by the USB stack, allowing us to charge more quickly from high
current inputs without drawing more current than specified from others.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 Documentation/devicetree/bindings/mfd/wm831x.txt |    1 +
 drivers/power/supply/wm831x_power.c              |   72 ++++++++++++++++++++++
 2 files changed, 73 insertions(+)

Comments

Sebastian Reichel July 27, 2017, 8:34 a.m. UTC | #1 
Hi,

On Thu, Jul 27, 2017 at 01:14:38PM +0800, Baolin Wang wrote:
> Integrate with the newly added USB charger interface to limit the current
> we draw from the USB input based on the input device configuration
> identified by the USB stack, allowing us to charge more quickly from high
> current inputs without drawing more current than specified from others.
> 
> Signed-off-by: Mark Brown <broonie@kernel.org>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---

Looks ok now.

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

>  Documentation/devicetree/bindings/mfd/wm831x.txt |    1 +
>  drivers/power/supply/wm831x_power.c              |   72 ++++++++++++++++++++++
>  2 files changed, 73 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
> index 9f8b743..4e3bc07 100644
> --- a/Documentation/devicetree/bindings/mfd/wm831x.txt
> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
> @@ -31,6 +31,7 @@ Required properties:
>      ../interrupt-controller/interrupts.txt
>  
>  Optional sub-nodes:
> +  - usb-phy : Contains a phandle to the USB PHY.
>    - regulators : Contains sub-nodes for each of the regulators supplied by
>      the device. The regulators are bound using their names listed below:
>  
> diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c
> index 7082301..dff6473 100644
> --- a/drivers/power/supply/wm831x_power.c
> +++ b/drivers/power/supply/wm831x_power.c
> @@ -13,6 +13,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/power_supply.h>
>  #include <linux/slab.h>
> +#include <linux/usb/phy.h>
>  
>  #include <linux/mfd/wm831x/core.h>
>  #include <linux/mfd/wm831x/auxadc.h>
> @@ -31,6 +32,8 @@ struct wm831x_power {
>  	char usb_name[20];
>  	char battery_name[20];
>  	bool have_battery;
> +	struct usb_phy *usb_phy;
> +	struct notifier_block usb_notify;
>  };
>  
>  static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
> @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy,
>  	POWER_SUPPLY_PROP_VOLTAGE_NOW,
>  };
>  
> +/* In milliamps */
> +static const unsigned int wm831x_usb_limits[] = {
> +	0,
> +	2,
> +	100,
> +	500,
> +	900,
> +	1500,
> +	1800,
> +	550,
> +};
> +
> +static int wm831x_usb_limit_change(struct notifier_block *nb,
> +				   unsigned long limit, void *data)
> +{
> +	struct wm831x_power *wm831x_power = container_of(nb,
> +							 struct wm831x_power,
> +							 usb_notify);
> +	unsigned int i, best;
> +
> +	/* Find the highest supported limit */
> +	best = 0;
> +	for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
> +		if (limit >= wm831x_usb_limits[i] &&
> +		    wm831x_usb_limits[best] < wm831x_usb_limits[i])
> +			best = i;
> +	}
> +
> +	dev_dbg(wm831x_power->wm831x->dev,
> +		"Limiting USB current to %umA", wm831x_usb_limits[best]);
> +
> +	wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
> +		        WM831X_USB_ILIM_MASK, best);
> +
> +	return 0;
> +}
> +
>  /*********************************************************************
>   *		Battery properties
>   *********************************************************************/
> @@ -607,6 +647,33 @@ static int wm831x_power_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
> +	ret = PTR_ERR_OR_ZERO(power->usb_phy);
> +
> +	switch (ret) {
> +	case 0:
> +		power->usb_notify.notifier_call = wm831x_usb_limit_change;
> +		ret = usb_register_notifier(power->usb_phy, &power->usb_notify);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to register notifier: %d\n",
> +				ret);
> +			goto err_bat_irq;
> +		}
> +		break;
> +	case -EINVAL:
> +	case -ENODEV:
> +		/* ignore missing usb-phy, it's optional */
> +		power->usb_phy = NULL;
> +		ret = 0;
> +		break;
> +	default:
> +		dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
> +		/* fall-through */
> +	case -EPROBE_DEFER:
> +		goto err_bat_irq;
> +		break;
> +	}
> +
>  	return ret;
>  
>  err_bat_irq:
> @@ -637,6 +704,11 @@ static int wm831x_power_remove(struct platform_device *pdev)
>  	struct wm831x *wm831x = wm831x_power->wm831x;
>  	int irq, i;
>  
> +	if (wm831x_power->usb_phy) {
> +		usb_unregister_notifier(wm831x_power->usb_phy,
> +					&wm831x_power->usb_notify);
> +	}
> +
>  	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
>  		irq = wm831x_irq(wm831x, 
>  				 platform_get_irq_byname(pdev,
> -- 
> 1.7.9.5
>
Rob Herring Aug. 3, 2017, 7:16 p.m. UTC | #2 
On Thu, Jul 27, 2017 at 01:14:38PM +0800, Baolin Wang wrote:
> Integrate with the newly added USB charger interface to limit the current
> we draw from the USB input based on the input device configuration
> identified by the USB stack, allowing us to charge more quickly from high
> current inputs without drawing more current than specified from others.
> 
> Signed-off-by: Mark Brown <broonie@kernel.org>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  Documentation/devicetree/bindings/mfd/wm831x.txt |    1 +
>  drivers/power/supply/wm831x_power.c              |   72 ++++++++++++++++++++++
>  2 files changed, 73 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
> index 9f8b743..4e3bc07 100644
> --- a/Documentation/devicetree/bindings/mfd/wm831x.txt
> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
> @@ -31,6 +31,7 @@ Required properties:
>      ../interrupt-controller/interrupts.txt
>  
>  Optional sub-nodes:
> +  - usb-phy : Contains a phandle to the USB PHY.

Use the phy binding ("phys") instead.

>    - regulators : Contains sub-nodes for each of the regulators supplied by
>      the device. The regulators are bound using their names listed below:
>  
> diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c
> index 7082301..dff6473 100644
> --- a/drivers/power/supply/wm831x_power.c
> +++ b/drivers/power/supply/wm831x_power.c
> @@ -13,6 +13,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/power_supply.h>
>  #include <linux/slab.h>
> +#include <linux/usb/phy.h>
>  
>  #include <linux/mfd/wm831x/core.h>
>  #include <linux/mfd/wm831x/auxadc.h>
> @@ -31,6 +32,8 @@ struct wm831x_power {
>  	char usb_name[20];
>  	char battery_name[20];
>  	bool have_battery;
> +	struct usb_phy *usb_phy;
> +	struct notifier_block usb_notify;
>  };
>  
>  static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
> @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy,
>  	POWER_SUPPLY_PROP_VOLTAGE_NOW,
>  };
>  
> +/* In milliamps */
> +static const unsigned int wm831x_usb_limits[] = {
> +	0,
> +	2,
> +	100,
> +	500,
> +	900,
> +	1500,
> +	1800,
> +	550,
> +};
> +
> +static int wm831x_usb_limit_change(struct notifier_block *nb,
> +				   unsigned long limit, void *data)
> +{
> +	struct wm831x_power *wm831x_power = container_of(nb,
> +							 struct wm831x_power,
> +							 usb_notify);
> +	unsigned int i, best;
> +
> +	/* Find the highest supported limit */
> +	best = 0;
> +	for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
> +		if (limit >= wm831x_usb_limits[i] &&
> +		    wm831x_usb_limits[best] < wm831x_usb_limits[i])
> +			best = i;
> +	}
> +
> +	dev_dbg(wm831x_power->wm831x->dev,
> +		"Limiting USB current to %umA", wm831x_usb_limits[best]);
> +
> +	wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
> +		        WM831X_USB_ILIM_MASK, best);
> +
> +	return 0;
> +}
> +
>  /*********************************************************************
>   *		Battery properties
>   *********************************************************************/
> @@ -607,6 +647,33 @@ static int wm831x_power_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
> +	ret = PTR_ERR_OR_ZERO(power->usb_phy);
> +
> +	switch (ret) {
> +	case 0:
> +		power->usb_notify.notifier_call = wm831x_usb_limit_change;
> +		ret = usb_register_notifier(power->usb_phy, &power->usb_notify);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to register notifier: %d\n",
> +				ret);
> +			goto err_bat_irq;
> +		}
> +		break;
> +	case -EINVAL:
> +	case -ENODEV:
> +		/* ignore missing usb-phy, it's optional */
> +		power->usb_phy = NULL;
> +		ret = 0;
> +		break;
> +	default:
> +		dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
> +		/* fall-through */
> +	case -EPROBE_DEFER:
> +		goto err_bat_irq;
> +		break;
> +	}
> +
>  	return ret;
>  
>  err_bat_irq:
> @@ -637,6 +704,11 @@ static int wm831x_power_remove(struct platform_device *pdev)
>  	struct wm831x *wm831x = wm831x_power->wm831x;
>  	int irq, i;
>  
> +	if (wm831x_power->usb_phy) {
> +		usb_unregister_notifier(wm831x_power->usb_phy,
> +					&wm831x_power->usb_notify);
> +	}
> +
>  	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
>  		irq = wm831x_irq(wm831x, 
>  				 platform_get_irq_byname(pdev,
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Baolin Wang Aug. 4, 2017, 2:13 a.m. UTC | #3 
On 4 August 2017 at 03:16, Rob Herring <robh@kernel.org> wrote:
> On Thu, Jul 27, 2017 at 01:14:38PM +0800, Baolin Wang wrote:
>> Integrate with the newly added USB charger interface to limit the current
>> we draw from the USB input based on the input device configuration
>> identified by the USB stack, allowing us to charge more quickly from high
>> current inputs without drawing more current than specified from others.
>>
>> Signed-off-by: Mark Brown <broonie@kernel.org>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> Acked-by: Lee Jones <lee.jones@linaro.org>
>> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
>> ---
>>  Documentation/devicetree/bindings/mfd/wm831x.txt |    1 +
>>  drivers/power/supply/wm831x_power.c              |   72 ++++++++++++++++++++++
>>  2 files changed, 73 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
>> index 9f8b743..4e3bc07 100644
>> --- a/Documentation/devicetree/bindings/mfd/wm831x.txt
>> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
>> @@ -31,6 +31,7 @@ Required properties:
>>      ../interrupt-controller/interrupts.txt
>>
>>  Optional sub-nodes:
>> +  - usb-phy : Contains a phandle to the USB PHY.
>
> Use the phy binding ("phys") instead.

OK. Will fix in next version. Thanks.

>
>>    - regulators : Contains sub-nodes for each of the regulators supplied by
>>      the device. The regulators are bound using their names listed below:
>>
>> diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c
>> index 7082301..dff6473 100644
>> --- a/drivers/power/supply/wm831x_power.c
>> +++ b/drivers/power/supply/wm831x_power.c
>> @@ -13,6 +13,7 @@
>>  #include <linux/platform_device.h>
>>  #include <linux/power_supply.h>
>>  #include <linux/slab.h>
>> +#include <linux/usb/phy.h>
>>
>>  #include <linux/mfd/wm831x/core.h>
>>  #include <linux/mfd/wm831x/auxadc.h>
>> @@ -31,6 +32,8 @@ struct wm831x_power {
>>       char usb_name[20];
>>       char battery_name[20];
>>       bool have_battery;
>> +     struct usb_phy *usb_phy;
>> +     struct notifier_block usb_notify;
>>  };
>>
>>  static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
>> @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy,
>>       POWER_SUPPLY_PROP_VOLTAGE_NOW,
>>  };
>>
>> +/* In milliamps */
>> +static const unsigned int wm831x_usb_limits[] = {
>> +     0,
>> +     2,
>> +     100,
>> +     500,
>> +     900,
>> +     1500,
>> +     1800,
>> +     550,
>> +};
>> +
>> +static int wm831x_usb_limit_change(struct notifier_block *nb,
>> +                                unsigned long limit, void *data)
>> +{
>> +     struct wm831x_power *wm831x_power = container_of(nb,
>> +                                                      struct wm831x_power,
>> +                                                      usb_notify);
>> +     unsigned int i, best;
>> +
>> +     /* Find the highest supported limit */
>> +     best = 0;
>> +     for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
>> +             if (limit >= wm831x_usb_limits[i] &&
>> +                 wm831x_usb_limits[best] < wm831x_usb_limits[i])
>> +                     best = i;
>> +     }
>> +
>> +     dev_dbg(wm831x_power->wm831x->dev,
>> +             "Limiting USB current to %umA", wm831x_usb_limits[best]);
>> +
>> +     wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
>> +                     WM831X_USB_ILIM_MASK, best);
>> +
>> +     return 0;
>> +}
>> +
>>  /*********************************************************************
>>   *           Battery properties
>>   *********************************************************************/
>> @@ -607,6 +647,33 @@ static int wm831x_power_probe(struct platform_device *pdev)
>>               }
>>       }
>>
>> +     power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
>> +     ret = PTR_ERR_OR_ZERO(power->usb_phy);
>> +
>> +     switch (ret) {
>> +     case 0:
>> +             power->usb_notify.notifier_call = wm831x_usb_limit_change;
>> +             ret = usb_register_notifier(power->usb_phy, &power->usb_notify);
>> +             if (ret) {
>> +                     dev_err(&pdev->dev, "Failed to register notifier: %d\n",
>> +                             ret);
>> +                     goto err_bat_irq;
>> +             }
>> +             break;
>> +     case -EINVAL:
>> +     case -ENODEV:
>> +             /* ignore missing usb-phy, it's optional */
>> +             power->usb_phy = NULL;
>> +             ret = 0;
>> +             break;
>> +     default:
>> +             dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
>> +             /* fall-through */
>> +     case -EPROBE_DEFER:
>> +             goto err_bat_irq;
>> +             break;
>> +     }
>> +
>>       return ret;
>>
>>  err_bat_irq:
>> @@ -637,6 +704,11 @@ static int wm831x_power_remove(struct platform_device *pdev)
>>       struct wm831x *wm831x = wm831x_power->wm831x;
>>       int irq, i;
>>
>> +     if (wm831x_power->usb_phy) {
>> +             usb_unregister_notifier(wm831x_power->usb_phy,
>> +                                     &wm831x_power->usb_notify);
>> +     }
>> +
>>       for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
>>               irq = wm831x_irq(wm831x,
>>                                platform_get_irq_byname(pdev,
>> --
>> 1.7.9.5
>>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
index 9f8b743..4e3bc07 100644
--- a/Documentation/devicetree/bindings/mfd/wm831x.txt
+++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
@@ -31,6 +31,7 @@  Required properties:
     ../interrupt-controller/interrupts.txt
 
 Optional sub-nodes:
+  - usb-phy : Contains a phandle to the USB PHY.
   - regulators : Contains sub-nodes for each of the regulators supplied by
     the device. The regulators are bound using their names listed below:
 
diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c
index 7082301..dff6473 100644
--- a/drivers/power/supply/wm831x_power.c
+++ b/drivers/power/supply/wm831x_power.c
@@ -13,6 +13,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
+#include <linux/usb/phy.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/auxadc.h>
@@ -31,6 +32,8 @@  struct wm831x_power {
 	char usb_name[20];
 	char battery_name[20];
 	bool have_battery;
+	struct usb_phy *usb_phy;
+	struct notifier_block usb_notify;
 };
 
 static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
@@ -125,6 +128,43 @@  static int wm831x_usb_get_prop(struct power_supply *psy,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 };
 
+/* In milliamps */
+static const unsigned int wm831x_usb_limits[] = {
+	0,
+	2,
+	100,
+	500,
+	900,
+	1500,
+	1800,
+	550,
+};
+
+static int wm831x_usb_limit_change(struct notifier_block *nb,
+				   unsigned long limit, void *data)
+{
+	struct wm831x_power *wm831x_power = container_of(nb,
+							 struct wm831x_power,
+							 usb_notify);
+	unsigned int i, best;
+
+	/* Find the highest supported limit */
+	best = 0;
+	for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
+		if (limit >= wm831x_usb_limits[i] &&
+		    wm831x_usb_limits[best] < wm831x_usb_limits[i])
+			best = i;
+	}
+
+	dev_dbg(wm831x_power->wm831x->dev,
+		"Limiting USB current to %umA", wm831x_usb_limits[best]);
+
+	wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
+		        WM831X_USB_ILIM_MASK, best);
+
+	return 0;
+}
+
 /*********************************************************************
  *		Battery properties
  *********************************************************************/
@@ -607,6 +647,33 @@  static int wm831x_power_probe(struct platform_device *pdev)
 		}
 	}
 
+	power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+	ret = PTR_ERR_OR_ZERO(power->usb_phy);
+
+	switch (ret) {
+	case 0:
+		power->usb_notify.notifier_call = wm831x_usb_limit_change;
+		ret = usb_register_notifier(power->usb_phy, &power->usb_notify);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to register notifier: %d\n",
+				ret);
+			goto err_bat_irq;
+		}
+		break;
+	case -EINVAL:
+	case -ENODEV:
+		/* ignore missing usb-phy, it's optional */
+		power->usb_phy = NULL;
+		ret = 0;
+		break;
+	default:
+		dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
+		/* fall-through */
+	case -EPROBE_DEFER:
+		goto err_bat_irq;
+		break;
+	}
+
 	return ret;
 
 err_bat_irq:
@@ -637,6 +704,11 @@  static int wm831x_power_remove(struct platform_device *pdev)
 	struct wm831x *wm831x = wm831x_power->wm831x;
 	int irq, i;
 
+	if (wm831x_power->usb_phy) {
+		usb_unregister_notifier(wm831x_power->usb_phy,
+					&wm831x_power->usb_notify);
+	}
+
 	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
 		irq = wm831x_irq(wm831x, 
 				 platform_get_irq_byname(pdev,