diff mbox

[V4,RESEND,6/6] pinctrl: pinctrl-imx7ulp: add gpio_set_direction support

Message ID 1500990116-3620-7-git-send-email-aisheng.dong@nxp.com
State New
Headers show

Commit Message

Dong Aisheng July 25, 2017, 1:41 p.m. UTC 
Add gpio_set_direction support. This makes the driver support
GPIO input/output dynamically change from userspace.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Fugang Duan <fugang.duan@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

---
ChangeLog:
 * New patch. Derived from the original:
   [PATCH 1/2] pinctrl: pinctrl-imx: add IBE and OBE SoC property
---
 drivers/pinctrl/freescale/pinctrl-imx7ulp.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Linus Walleij Aug. 1, 2017, 11:56 a.m. UTC | #1 
On Tue, Jul 25, 2017 at 3:41 PM, Dong Aisheng <aisheng.dong@nxp.com> wrote:

> Add gpio_set_direction support. This makes the driver support
> GPIO input/output dynamically change from userspace.
>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Alexandre Courbot <gnurou@gmail.com>
> Cc: Stefan Agner <stefan@agner.ch>
> Cc: Fugang Duan <fugang.duan@nxp.com>
> Cc: Bai Ping <ping.bai@nxp.com>
> Acked-by: Shawn Guo <shawnguo@kernel.org>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

Patch applied.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pinctrl/freescale/pinctrl-imx7ulp.c b/drivers/pinctrl/freescale/pinctrl-imx7ulp.c
index 96127dc..b7bebb2 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx7ulp.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx7ulp.c
@@ -259,6 +259,8 @@  static const struct pinctrl_pin_desc imx7ulp_pinctrl_pads[] = {
 	IMX_PINCTRL_PIN(IMX7ULP_PAD_PTF19),
 };
 
+#define BM_OBE_ENABLED		BIT(17)
+#define BM_IBE_ENABLED		BIT(16)
 #define BM_LK_ENABLED		BIT(15)
 #define BM_MUX_MODE		0xf00
 #define BP_MUX_MODE		8
@@ -300,10 +302,34 @@  static void imx7ulp_cfg_params_fixup(unsigned long *configs,
 	}
 }
 
+static int imx7ulp_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+					  struct pinctrl_gpio_range *range,
+					  unsigned offset, bool input)
+{
+	struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+	struct imx_pinctrl_soc_info *info = ipctl->info;
+	const struct imx_pin_reg *pin_reg;
+	u32 reg;
+
+	pin_reg = &info->pin_regs[offset];
+	if (pin_reg->mux_reg == -1)
+		return -EINVAL;
+
+	reg = readl(ipctl->base + pin_reg->mux_reg);
+	if (input)
+		reg = (reg & ~BM_OBE_ENABLED) | BM_IBE_ENABLED;
+	else
+		reg = (reg & ~BM_IBE_ENABLED) | BM_OBE_ENABLED;
+	writel(reg, ipctl->base + pin_reg->mux_reg);
+
+	return 0;
+}
+
 static struct imx_pinctrl_soc_info imx7ulp_pinctrl_info = {
 	.pins = imx7ulp_pinctrl_pads,
 	.npins = ARRAY_SIZE(imx7ulp_pinctrl_pads),
 	.flags = ZERO_OFFSET_VALID | SHARE_MUX_CONF_REG,
+	.gpio_set_direction = imx7ulp_pmx_gpio_set_direction,
 	.mux_mask = BM_MUX_MODE,
 	.mux_shift = BP_MUX_MODE,
 	.generic_pinconf = true,