diff mbox

[net-next] cxgb4: display serial config and vpd versions

Message ID 1500555528-16893-1-git-send-email-ganeshgr@chelsio.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Ganesh Goudar July 20, 2017, 12:58 p.m. UTC 
print the versions of vpd and serial configuration file,
flashed to adapter, and cleanup the relevant code.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h      |  14 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c |  57 +-------
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c      | 173 ++++++++++++++++++++++++
 drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h   |   2 +
 4 files changed, 188 insertions(+), 58 deletions(-)

Comments

David Miller July 20, 2017, 10:29 p.m. UTC | #1 
From: Ganesh Goudar <ganeshgr@chelsio.com>
Date: Thu, 20 Jul 2017 18:28:48 +0530

> print the versions of vpd and serial configuration file,
> flashed to adapter, and cleanup the relevant code.
> 
> Signed-off-by: Casey Leedom <leedom@chelsio.com>
> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>

Applied, thanks.
diff mbox

Patch

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index ef4be78..1978abb 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -338,10 +338,12 @@  struct adapter_params {
 	unsigned int sf_nsec;             /* # of flash sectors */
 	unsigned int sf_fw_start;         /* start of FW image in flash */
 
-	unsigned int fw_vers;
-	unsigned int bs_vers;		/* bootstrap version */
-	unsigned int tp_vers;
-	unsigned int er_vers;		/* expansion ROM version */
+	unsigned int fw_vers;		  /* firmware version */
+	unsigned int bs_vers;		  /* bootstrap version */
+	unsigned int tp_vers;		  /* TP microcode version */
+	unsigned int er_vers;		  /* expansion ROM version */
+	unsigned int scfg_vers;		  /* Serial Configuration version */
+	unsigned int vpd_vers;		  /* VPD Version */
 	u8 api_vers[7];
 
 	unsigned short mtus[NMTUS];
@@ -1407,6 +1409,10 @@  int t4_get_fw_version(struct adapter *adapter, u32 *vers);
 int t4_get_bs_version(struct adapter *adapter, u32 *vers);
 int t4_get_tp_version(struct adapter *adapter, u32 *vers);
 int t4_get_exprom_version(struct adapter *adapter, u32 *vers);
+int t4_get_scfg_version(struct adapter *adapter, u32 *vers);
+int t4_get_vpd_version(struct adapter *adapter, u32 *vers);
+int t4_get_version_info(struct adapter *adapter);
+void t4_dump_version_info(struct adapter *adapter);
 int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info,
 	       const u8 *fw_data, unsigned int fw_size,
 	       struct fw_hdr *card_fw, enum dev_state state, int *reset);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index e403fa1..fdf220a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3610,11 +3610,8 @@  static int adap_init0(struct adapter *adap)
 	 * later reporting and B. to warn if the currently loaded firmware
 	 * is excessively mismatched relative to the driver.)
 	 */
-	t4_get_fw_version(adap, &adap->params.fw_vers);
-	t4_get_bs_version(adap, &adap->params.bs_vers);
-	t4_get_tp_version(adap, &adap->params.tp_vers);
-	t4_get_exprom_version(adap, &adap->params.er_vers);
 
+	t4_get_version_info(adap);
 	ret = t4_check_fw_version(adap);
 	/* If firmware is too old (not supported by driver) force an update. */
 	if (ret)
@@ -4560,56 +4557,8 @@  static void cxgb4_check_pcie_caps(struct adapter *adap)
 /* Dump basic information about the adapter */
 static void print_adapter_info(struct adapter *adapter)
 {
-	/* Device information */
-	dev_info(adapter->pdev_dev, "Chelsio %s rev %d\n",
-		 adapter->params.vpd.id,
-		 CHELSIO_CHIP_RELEASE(adapter->params.chip));
-	dev_info(adapter->pdev_dev, "S/N: %s, P/N: %s\n",
-		 adapter->params.vpd.sn, adapter->params.vpd.pn);
-
-	/* Firmware Version */
-	if (!adapter->params.fw_vers)
-		dev_warn(adapter->pdev_dev, "No firmware loaded\n");
-	else
-		dev_info(adapter->pdev_dev, "Firmware version: %u.%u.%u.%u\n",
-			 FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
-			 FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
-			 FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
-			 FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers));
-
-	/* Bootstrap Firmware Version. (Some adapters don't have Bootstrap
-	 * Firmware, so dev_info() is more appropriate here.)
-	 */
-	if (!adapter->params.bs_vers)
-		dev_info(adapter->pdev_dev, "No bootstrap loaded\n");
-	else
-		dev_info(adapter->pdev_dev, "Bootstrap version: %u.%u.%u.%u\n",
-			 FW_HDR_FW_VER_MAJOR_G(adapter->params.bs_vers),
-			 FW_HDR_FW_VER_MINOR_G(adapter->params.bs_vers),
-			 FW_HDR_FW_VER_MICRO_G(adapter->params.bs_vers),
-			 FW_HDR_FW_VER_BUILD_G(adapter->params.bs_vers));
-
-	/* TP Microcode Version */
-	if (!adapter->params.tp_vers)
-		dev_warn(adapter->pdev_dev, "No TP Microcode loaded\n");
-	else
-		dev_info(adapter->pdev_dev,
-			 "TP Microcode version: %u.%u.%u.%u\n",
-			 FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
-			 FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
-			 FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
-			 FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));
-
-	/* Expansion ROM version */
-	if (!adapter->params.er_vers)
-		dev_info(adapter->pdev_dev, "No Expansion ROM loaded\n");
-	else
-		dev_info(adapter->pdev_dev,
-			 "Expansion ROM version: %u.%u.%u.%u\n",
-			 FW_HDR_FW_VER_MAJOR_G(adapter->params.er_vers),
-			 FW_HDR_FW_VER_MINOR_G(adapter->params.er_vers),
-			 FW_HDR_FW_VER_MICRO_G(adapter->params.er_vers),
-			 FW_HDR_FW_VER_BUILD_G(adapter->params.er_vers));
+	/* Hardware/Firmware/etc. Version/Revision IDs */
+	t4_dump_version_info(adapter);
 
 	/* Software/Hardware configuration */
 	dev_info(adapter->pdev_dev, "Configuration: %sNIC %s, %s capable\n",
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 570c095..db41b3e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3077,6 +3077,179 @@  int t4_get_exprom_version(struct adapter *adap, u32 *vers)
 }
 
 /**
+ *      t4_get_vpd_version - return the VPD version
+ *      @adapter: the adapter
+ *      @vers: where to place the version
+ *
+ *      Reads the VPD via the Firmware interface (thus this can only be called
+ *      once we're ready to issue Firmware commands).  The format of the
+ *      VPD version is adapter specific.  Returns 0 on success, an error on
+ *      failure.
+ *
+ *      Note that early versions of the Firmware didn't include the ability
+ *      to retrieve the VPD version, so we zero-out the return-value parameter
+ *      in that case to avoid leaving it with garbage in it.
+ *
+ *      Also note that the Firmware will return its cached copy of the VPD
+ *      Revision ID, not the actual Revision ID as written in the Serial
+ *      EEPROM.  This is only an issue if a new VPD has been written and the
+ *      Firmware/Chip haven't yet gone through a RESET sequence.  So it's best
+ *      to defer calling this routine till after a FW_RESET_CMD has been issued
+ *      if the Host Driver will be performing a full adapter initialization.
+ */
+int t4_get_vpd_version(struct adapter *adapter, u32 *vers)
+{
+	u32 vpdrev_param;
+	int ret;
+
+	vpdrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+			FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_VPDREV));
+	ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
+			      1, &vpdrev_param, vers);
+	if (ret)
+		*vers = 0;
+	return ret;
+}
+
+/**
+ *      t4_get_scfg_version - return the Serial Configuration version
+ *      @adapter: the adapter
+ *      @vers: where to place the version
+ *
+ *      Reads the Serial Configuration Version via the Firmware interface
+ *      (thus this can only be called once we're ready to issue Firmware
+ *      commands).  The format of the Serial Configuration version is
+ *      adapter specific.  Returns 0 on success, an error on failure.
+ *
+ *      Note that early versions of the Firmware didn't include the ability
+ *      to retrieve the Serial Configuration version, so we zero-out the
+ *      return-value parameter in that case to avoid leaving it with
+ *      garbage in it.
+ *
+ *      Also note that the Firmware will return its cached copy of the Serial
+ *      Initialization Revision ID, not the actual Revision ID as written in
+ *      the Serial EEPROM.  This is only an issue if a new VPD has been written
+ *      and the Firmware/Chip haven't yet gone through a RESET sequence.  So
+ *      it's best to defer calling this routine till after a FW_RESET_CMD has
+ *      been issued if the Host Driver will be performing a full adapter
+ *      initialization.
+ */
+int t4_get_scfg_version(struct adapter *adapter, u32 *vers)
+{
+	u32 scfgrev_param;
+	int ret;
+
+	scfgrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+			 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_SCFGREV));
+	ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
+			      1, &scfgrev_param, vers);
+	if (ret)
+		*vers = 0;
+	return ret;
+}
+
+/**
+ *      t4_get_version_info - extract various chip/firmware version information
+ *      @adapter: the adapter
+ *
+ *      Reads various chip/firmware version numbers and stores them into the
+ *      adapter Adapter Parameters structure.  If any of the efforts fails
+ *      the first failure will be returned, but all of the version numbers
+ *      will be read.
+ */
+int t4_get_version_info(struct adapter *adapter)
+{
+	int ret = 0;
+
+	#define FIRST_RET(__getvinfo) \
+	do { \
+		int __ret = __getvinfo; \
+		if (__ret && !ret) \
+			ret = __ret; \
+	} while (0)
+
+	FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers));
+	FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers));
+	FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers));
+	FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers));
+	FIRST_RET(t4_get_scfg_version(adapter, &adapter->params.scfg_vers));
+	FIRST_RET(t4_get_vpd_version(adapter, &adapter->params.vpd_vers));
+
+	#undef FIRST_RET
+	return ret;
+}
+
+/**
+ *      t4_dump_version_info - dump all of the adapter configuration IDs
+ *      @adapter: the adapter
+ *
+ *      Dumps all of the various bits of adapter configuration version/revision
+ *      IDs information.  This is typically called at some point after
+ *      t4_get_version_info() has been called.
+ */
+void t4_dump_version_info(struct adapter *adapter)
+{
+	/* Device information */
+	dev_info(adapter->pdev_dev, "Chelsio %s rev %d\n",
+		 adapter->params.vpd.id,
+		 CHELSIO_CHIP_RELEASE(adapter->params.chip));
+	dev_info(adapter->pdev_dev, "S/N: %s, P/N: %s\n",
+		 adapter->params.vpd.sn, adapter->params.vpd.pn);
+
+	/* Firmware Version */
+	if (!adapter->params.fw_vers)
+		dev_warn(adapter->pdev_dev, "No firmware loaded\n");
+	else
+		dev_info(adapter->pdev_dev, "Firmware version: %u.%u.%u.%u\n",
+			 FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
+			 FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
+			 FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
+			 FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers));
+
+	/* Bootstrap Firmware Version. (Some adapters don't have Bootstrap
+	 * Firmware, so dev_info() is more appropriate here.)
+	 */
+	if (!adapter->params.bs_vers)
+		dev_info(adapter->pdev_dev, "No bootstrap loaded\n");
+	else
+		dev_info(adapter->pdev_dev, "Bootstrap version: %u.%u.%u.%u\n",
+			 FW_HDR_FW_VER_MAJOR_G(adapter->params.bs_vers),
+			 FW_HDR_FW_VER_MINOR_G(adapter->params.bs_vers),
+			 FW_HDR_FW_VER_MICRO_G(adapter->params.bs_vers),
+			 FW_HDR_FW_VER_BUILD_G(adapter->params.bs_vers));
+
+	/* TP Microcode Version */
+	if (!adapter->params.tp_vers)
+		dev_warn(adapter->pdev_dev, "No TP Microcode loaded\n");
+	else
+		dev_info(adapter->pdev_dev,
+			 "TP Microcode version: %u.%u.%u.%u\n",
+			 FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
+			 FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
+			 FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
+			 FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));
+
+	/* Expansion ROM version */
+	if (!adapter->params.er_vers)
+		dev_info(adapter->pdev_dev, "No Expansion ROM loaded\n");
+	else
+		dev_info(adapter->pdev_dev,
+			 "Expansion ROM version: %u.%u.%u.%u\n",
+			 FW_HDR_FW_VER_MAJOR_G(adapter->params.er_vers),
+			 FW_HDR_FW_VER_MINOR_G(adapter->params.er_vers),
+			 FW_HDR_FW_VER_MICRO_G(adapter->params.er_vers),
+			 FW_HDR_FW_VER_BUILD_G(adapter->params.er_vers));
+
+	/* Serial Configuration version */
+	dev_info(adapter->pdev_dev, "Serial Configuration version: %#x\n",
+		 adapter->params.scfg_vers);
+
+	/* VPD Version */
+	dev_info(adapter->pdev_dev, "VPD version: %#x\n",
+		 adapter->params.vpd_vers);
+}
+
+/**
  *	t4_check_fw_version - check if the FW is supported with this driver
  *	@adap: the adapter
  *
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index 0ebed64..ad825fb 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -1124,6 +1124,8 @@  enum fw_params_param_dev {
 	FW_PARAMS_PARAM_DEV_MAXIRD_ADAPTER = 0x14, /* max supported adap IRD */
 	FW_PARAMS_PARAM_DEV_ULPTX_MEMWRITE_DSGL = 0x17,
 	FW_PARAMS_PARAM_DEV_FWCACHE = 0x18,
+	FW_PARAMS_PARAM_DEV_SCFGREV = 0x1A,
+	FW_PARAMS_PARAM_DEV_VPDREV = 0x1B,
 	FW_PARAMS_PARAM_DEV_RI_FR_NSMR_TPTE_WR	= 0x1C,
 	FW_PARAMS_PARAM_DEV_MPSBGMAP	= 0x1E,
 };