diff mbox

NET: dwmac: Make dwmac reset unconditional

Message ID 20170718140715.25798-1-Eugeniy.Paltsev@synopsys.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Eugeniy Paltsev July 18, 2017, 2:07 p.m. UTC
Unconditional reset dwmac before HW init if reset controller is present.

In existing implementation we reset dwmac only after second module
probing:
(module load -> unload -> load again [reset happens])

Now we reset dwmac at every module load:
(module load [reset happens] -> unload -> load again [reset happens])

Also some reset controllers have only reset callback instead of
assert + deassert callbacks pair, so handle this case.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

Comments

David Miller July 19, 2017, 8:52 p.m. UTC | #1
From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Date: Tue, 18 Jul 2017 17:07:15 +0300

> Unconditional reset dwmac before HW init if reset controller is present.
> 
> In existing implementation we reset dwmac only after second module
> probing:
> (module load -> unload -> load again [reset happens])
> 
> Now we reset dwmac at every module load:
> (module load [reset happens] -> unload -> load again [reset happens])
> 
> Also some reset controllers have only reset callback instead of
> assert + deassert callbacks pair, so handle this case.
> 
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

Applied.
diff mbox

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 12236da..c7b3d0d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4096,8 +4096,15 @@  int stmmac_dvr_probe(struct device *device,
 	if ((phyaddr >= 0) && (phyaddr <= 31))
 		priv->plat->phy_addr = phyaddr;
 
-	if (priv->plat->stmmac_rst)
+	if (priv->plat->stmmac_rst) {
+		ret = reset_control_assert(priv->plat->stmmac_rst);
 		reset_control_deassert(priv->plat->stmmac_rst);
+		/* Some reset controllers have only reset callback instead of
+		 * assert + deassert callbacks pair.
+		 */
+		if (ret == -ENOTSUPP)
+			reset_control_reset(priv->plat->stmmac_rst);
+	}
 
 	/* Init MAC and get the capabilities */
 	ret = stmmac_hw_init(priv);