| Message ID | 1500375436-9435-5-git-send-email-j-keerthy@ti.com |
|---|---|
| State | New |
| Headers | show |
Hi Keerthy, On 07/18/2017 05:57 AM, Keerthy wrote: > keystone-k2g has 2 instances of gpio. The first one has all the 144 GPIOs Please use 66AK2G for keystone-k2g. > functional( 9 banks with 16 gpios = 144). The second instance has > only the GPIO0:GPIO67 functional and rest are marked reserved. > > Signed-off-by: Keerthy <j-keerthy@ti.com> > --- > arch/arm/boot/dts/keystone-k2g.dtsi | 42 +++++++++++++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi > index bf4d1fa..58ac3db 100644 > --- a/arch/arm/boot/dts/keystone-k2g.dtsi > +++ b/arch/arm/boot/dts/keystone-k2g.dtsi > @@ -15,6 +15,7 @@ > > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/pinctrl/keystone.h> > +#include <dt-bindings/gpio/gpio.h> > > / { > compatible = "ti,k2g","ti,keystone"; > @@ -168,5 +169,46 @@ > #reset-cells = <2>; > }; > }; > + > + gpio0: gpio@2603000 { > + compatible = "ti,keystone-k2g-gpio"; > + reg = <0x02603000 0x100>; > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + ti,ngpio = <144>; > + ti,davinci-gpio-unbanked = <0>; > + clocks = <&k2g_clks 0x001b 0x0>; > + clock-names = "gpio"; I don't see the clocks and clock-names documented in the binding. Looking at davinci_gpio_irq_setup(), these are required, and a specific clock name is what the driver is looking for. And you have different semantics for this on K2G and non-K2G SoCs. Davinci platforms are using non-DT clocks, so their DT nodes didn't have them. regards Suman > + }; > + > + gpio1: gpio@260a000 { > + compatible = "ti,keystone-k2g-gpio"; > + reg = <0x0260a000 0x100>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + ti,ngpio = <68>; > + ti,davinci-gpio-unbanked = <0>; > + clocks = <&k2g_clks 0x001c 0x0>; > + clock-names = "gpio"; > + }; > }; > }; > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday 19 July 2017 12:43 AM, Suman Anna wrote: > Hi Keerthy, > > On 07/18/2017 05:57 AM, Keerthy wrote: >> keystone-k2g has 2 instances of gpio. The first one has all the 144 GPIOs > > Please use 66AK2G for keystone-k2g. Okay > >> functional( 9 banks with 16 gpios = 144). The second instance has >> only the GPIO0:GPIO67 functional and rest are marked reserved. >> >> Signed-off-by: Keerthy <j-keerthy@ti.com> >> --- >> arch/arm/boot/dts/keystone-k2g.dtsi | 42 +++++++++++++++++++++++++++++++++++++ >> 1 file changed, 42 insertions(+) >> >> diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi >> index bf4d1fa..58ac3db 100644 >> --- a/arch/arm/boot/dts/keystone-k2g.dtsi >> +++ b/arch/arm/boot/dts/keystone-k2g.dtsi >> @@ -15,6 +15,7 @@ >> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/pinctrl/keystone.h> >> +#include <dt-bindings/gpio/gpio.h> >> >> / { >> compatible = "ti,k2g","ti,keystone"; >> @@ -168,5 +169,46 @@ >> #reset-cells = <2>; >> }; >> }; >> + >> + gpio0: gpio@2603000 { >> + compatible = "ti,keystone-k2g-gpio"; >> + reg = <0x02603000 0x100>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + ti,ngpio = <144>; >> + ti,davinci-gpio-unbanked = <0>; >> + clocks = <&k2g_clks 0x001b 0x0>; >> + clock-names = "gpio"; > > I don't see the clocks and clock-names documented in the binding. > Looking at davinci_gpio_irq_setup(), these are required, and a specific > clock name is what the driver is looking for. And you have different > semantics for this on K2G and non-K2G SoCs. Davinci platforms are using > non-DT clocks, so their DT nodes didn't have them. I will document the same. > > regards > Suman > >> + }; >> + >> + gpio1: gpio@260a000 { >> + compatible = "ti,keystone-k2g-gpio"; >> + reg = <0x0260a000 0x100>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + ti,ngpio = <68>; >> + ti,davinci-gpio-unbanked = <0>; >> + clocks = <&k2g_clks 0x001c 0x0>; >> + clock-names = "gpio"; >> + }; >> }; >> }; >> > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index bf4d1fa..58ac3db 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/keystone.h> +#include <dt-bindings/gpio/gpio.h> / { compatible = "ti,k2g","ti,keystone"; @@ -168,5 +169,46 @@ #reset-cells = <2>; }; }; + + gpio0: gpio@2603000 { + compatible = "ti,keystone-k2g-gpio"; + reg = <0x02603000 0x100>; + gpio-controller; + #gpio-cells = <2>; + + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k2g_clks 0x001b 0x0>; + clock-names = "gpio"; + }; + + gpio1: gpio@260a000 { + compatible = "ti,keystone-k2g-gpio"; + reg = <0x0260a000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <68>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k2g_clks 0x001c 0x0>; + clock-names = "gpio"; + }; }; };
keystone-k2g has 2 instances of gpio. The first one has all the 144 GPIOs functional( 9 banks with 16 gpios = 144). The second instance has only the GPIO0:GPIO67 functional and rest are marked reserved. Signed-off-by: Keerthy <j-keerthy@ti.com> --- arch/arm/boot/dts/keystone-k2g.dtsi | 42 +++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)