Message ID | 1295028613-28237-2-git-send-email-anthony.perard@citrix.com |
---|---|
State | New |
Headers | show |
On 2011-01-14 19:10, anthony.perard@citrix.com wrote: > From: Anthony PERARD <anthony.perard@citrix.com> > > In order to use log_start/log_stop with Xen as well in the vga code, > this two operations have been put in CPUPhysMemoryClient. > > The two new functions cpu_physical_log_start,cpu_physical_log_stop are > used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does > no longer depends on kvm header. Basically, this looks good to me. Two remarks below. > > Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> > --- > cpu-all.h | 6 ++++++ > cpu-common.h | 4 ++++ > exec.c | 42 ++++++++++++++++++++++++++++++++++++++++++ > hw/vga.c | 31 ++++++++++++++++--------------- > hw/vhost.c | 16 ++++++++++++++++ > kvm-all.c | 8 ++++++-- > kvm-stub.c | 10 ---------- > kvm.h | 3 --- > 8 files changed, 90 insertions(+), 30 deletions(-) > > diff --git a/cpu-all.h b/cpu-all.h > index 30ae17d..aaf5442 100644 > --- a/cpu-all.h > +++ b/cpu-all.h > @@ -957,6 +957,12 @@ int cpu_physical_memory_get_dirty_tracking(void); > int cpu_physical_sync_dirty_bitmap(target_phys_addr_t start_addr, > target_phys_addr_t end_addr); > > +int cpu_physical_log_start(target_phys_addr_t start_addr, > + ram_addr_t size); > + > +int cpu_physical_log_stop(target_phys_addr_t start_addr, > + ram_addr_t size); > + > void dump_exec_info(FILE *f, fprintf_function cpu_fprintf); > #endif /* !CONFIG_USER_ONLY */ > > diff --git a/cpu-common.h b/cpu-common.h > index 8ec01f4..2344842 100644 > --- a/cpu-common.h > +++ b/cpu-common.h > @@ -88,6 +88,10 @@ struct CPUPhysMemoryClient { > target_phys_addr_t end_addr); > int (*migration_log)(struct CPUPhysMemoryClient *client, > int enable); > + int (*log_start)(struct CPUPhysMemoryClient *client, > + target_phys_addr_t phys_addr, ram_addr_t size); > + int (*log_stop)(struct CPUPhysMemoryClient *client, > + target_phys_addr_t phys_addr, ram_addr_t size); > QLIST_ENTRY(CPUPhysMemoryClient) list; > }; > > diff --git a/exec.c b/exec.c > index c6ed96d..609ec88 100644 > --- a/exec.c > +++ b/exec.c > @@ -1734,6 +1734,30 @@ static int cpu_notify_migration_log(int enable) > return 0; > } > > +static int cpu_notify_log_start(target_phys_addr_t start, > + ram_addr_t size) > +{ > + CPUPhysMemoryClient *client; > + QLIST_FOREACH(client, &memory_client_list, list) { > + int r = client->log_start(client, start, size); > + if (r < 0) > + return r; > + } > + return 0; > +} > + > +static int cpu_notify_log_stop(target_phys_addr_t start, > + ram_addr_t size) > +{ > + CPUPhysMemoryClient *client; > + QLIST_FOREACH(client, &memory_client_list, list) { > + int r = client->log_stop(client, start, size); > + if (r < 0) > + return r; > + } > + return 0; > +} > + I would make the new callbacks optional, i.e. only invoke them if the handler is non-NULL. Avoids stubs and branching to vhost. > static void phys_page_for_each_1(CPUPhysMemoryClient *client, > int level, void **lp) > { > @@ -2073,6 +2097,24 @@ int cpu_physical_sync_dirty_bitmap(target_phys_addr_t start_addr, > return ret; > } > > +int cpu_physical_log_start(target_phys_addr_t start_addr, > + ram_addr_t size) > +{ > + int ret; > + > + ret = cpu_notify_log_start(start_addr, size); > + return ret; > +} > + > +int cpu_physical_log_stop(target_phys_addr_t start_addr, > + ram_addr_t size) > +{ > + int ret; > + > + ret = cpu_notify_log_stop(start_addr, size); > + return ret; > +} > + I consider this split-up between API frontend and cpu_notify_* backend as unneeded. But that's not your fault, you just follow the pre-existing pattern. Unless someone feels strong about this, you may just keep it. Jan
On Mon, 17 Jan 2011, Jan Kiszka wrote: > On 2011-01-14 19:10, anthony.perard@citrix.com wrote: > > From: Anthony PERARD <anthony.perard@citrix.com> > > > > In order to use log_start/log_stop with Xen as well in the vga code, > > this two operations have been put in CPUPhysMemoryClient. > > > > The two new functions cpu_physical_log_start,cpu_physical_log_stop are > > used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does > > no longer depends on kvm header. > > Basically, this looks good to me. Two remarks below. > > > > > Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> > > --- > > cpu-all.h | 6 ++++++ > > cpu-common.h | 4 ++++ > > exec.c | 42 ++++++++++++++++++++++++++++++++++++++++++ > > hw/vga.c | 31 ++++++++++++++++--------------- > > hw/vhost.c | 16 ++++++++++++++++ > > kvm-all.c | 8 ++++++-- > > kvm-stub.c | 10 ---------- > > kvm.h | 3 --- > > 8 files changed, 90 insertions(+), 30 deletions(-) > > > > diff --git a/exec.c b/exec.c > > index c6ed96d..609ec88 100644 > > --- a/exec.c > > +++ b/exec.c > > @@ -1734,6 +1734,30 @@ static int cpu_notify_migration_log(int enable) > > return 0; > > } > > > > +static int cpu_notify_log_start(target_phys_addr_t start, > > + ram_addr_t size) > > +{ > > + CPUPhysMemoryClient *client; > > + QLIST_FOREACH(client, &memory_client_list, list) { > > + int r = client->log_start(client, start, size); > > + if (r < 0) > > + return r; > > + } > > + return 0; > > +} > > + > > +static int cpu_notify_log_stop(target_phys_addr_t start, > > + ram_addr_t size) > > +{ > > + CPUPhysMemoryClient *client; > > + QLIST_FOREACH(client, &memory_client_list, list) { > > + int r = client->log_stop(client, start, size); > > + if (r < 0) > > + return r; > > + } > > + return 0; > > +} > > + > > I would make the new callbacks optional, i.e. only invoke them if the > handler is non-NULL. Avoids stubs and branching to vhost. Ok, I will do that. > > static void phys_page_for_each_1(CPUPhysMemoryClient *client, > > int level, void **lp) > > { > > @@ -2073,6 +2097,24 @@ int cpu_physical_sync_dirty_bitmap(target_phys_addr_t start_addr, > > return ret; > > } > > > > +int cpu_physical_log_start(target_phys_addr_t start_addr, > > + ram_addr_t size) > > +{ > > + int ret; > > + > > + ret = cpu_notify_log_start(start_addr, size); > > + return ret; > > +} > > + > > +int cpu_physical_log_stop(target_phys_addr_t start_addr, > > + ram_addr_t size) > > +{ > > + int ret; > > + > > + ret = cpu_notify_log_stop(start_addr, size); > > + return ret; > > +} > > + > > I consider this split-up between API frontend and cpu_notify_* backend > as unneeded. But that's not your fault, you just follow the pre-existing > pattern. Unless someone feels strong about this, you may just keep it. Actually, I will remove it, and keep only the frontend fonction. Thanks,
diff --git a/cpu-all.h b/cpu-all.h index 30ae17d..aaf5442 100644 --- a/cpu-all.h +++ b/cpu-all.h @@ -957,6 +957,12 @@ int cpu_physical_memory_get_dirty_tracking(void); int cpu_physical_sync_dirty_bitmap(target_phys_addr_t start_addr, target_phys_addr_t end_addr); +int cpu_physical_log_start(target_phys_addr_t start_addr, + ram_addr_t size); + +int cpu_physical_log_stop(target_phys_addr_t start_addr, + ram_addr_t size); + void dump_exec_info(FILE *f, fprintf_function cpu_fprintf); #endif /* !CONFIG_USER_ONLY */ diff --git a/cpu-common.h b/cpu-common.h index 8ec01f4..2344842 100644 --- a/cpu-common.h +++ b/cpu-common.h @@ -88,6 +88,10 @@ struct CPUPhysMemoryClient { target_phys_addr_t end_addr); int (*migration_log)(struct CPUPhysMemoryClient *client, int enable); + int (*log_start)(struct CPUPhysMemoryClient *client, + target_phys_addr_t phys_addr, ram_addr_t size); + int (*log_stop)(struct CPUPhysMemoryClient *client, + target_phys_addr_t phys_addr, ram_addr_t size); QLIST_ENTRY(CPUPhysMemoryClient) list; }; diff --git a/exec.c b/exec.c index c6ed96d..609ec88 100644 --- a/exec.c +++ b/exec.c @@ -1734,6 +1734,30 @@ static int cpu_notify_migration_log(int enable) return 0; } +static int cpu_notify_log_start(target_phys_addr_t start, + ram_addr_t size) +{ + CPUPhysMemoryClient *client; + QLIST_FOREACH(client, &memory_client_list, list) { + int r = client->log_start(client, start, size); + if (r < 0) + return r; + } + return 0; +} + +static int cpu_notify_log_stop(target_phys_addr_t start, + ram_addr_t size) +{ + CPUPhysMemoryClient *client; + QLIST_FOREACH(client, &memory_client_list, list) { + int r = client->log_stop(client, start, size); + if (r < 0) + return r; + } + return 0; +} + static void phys_page_for_each_1(CPUPhysMemoryClient *client, int level, void **lp) { @@ -2073,6 +2097,24 @@ int cpu_physical_sync_dirty_bitmap(target_phys_addr_t start_addr, return ret; } +int cpu_physical_log_start(target_phys_addr_t start_addr, + ram_addr_t size) +{ + int ret; + + ret = cpu_notify_log_start(start_addr, size); + return ret; +} + +int cpu_physical_log_stop(target_phys_addr_t start_addr, + ram_addr_t size) +{ + int ret; + + ret = cpu_notify_log_stop(start_addr, size); + return ret; +} + static inline void tlb_update_dirty(CPUTLBEntry *tlb_entry) { ram_addr_t ram_addr; diff --git a/hw/vga.c b/hw/vga.c index c057f4f..a9bf172 100644 --- a/hw/vga.c +++ b/hw/vga.c @@ -28,7 +28,6 @@ #include "vga_int.h" #include "pixel_ops.h" #include "qemu-timer.h" -#include "kvm.h" //#define DEBUG_VGA //#define DEBUG_VGA_MEM @@ -1597,34 +1596,36 @@ static void vga_sync_dirty_bitmap(VGACommonState *s) void vga_dirty_log_start(VGACommonState *s) { - if (kvm_enabled() && s->map_addr) - kvm_log_start(s->map_addr, s->map_end - s->map_addr); + if (s->map_addr) { + cpu_physical_log_start(s->map_addr, s->map_end - s->map_addr); + } - if (kvm_enabled() && s->lfb_vram_mapped) { - kvm_log_start(isa_mem_base + 0xa0000, 0x8000); - kvm_log_start(isa_mem_base + 0xa8000, 0x8000); + if (s->lfb_vram_mapped) { + cpu_physical_log_start(isa_mem_base + 0xa0000, 0x8000); + cpu_physical_log_start(isa_mem_base + 0xa8000, 0x8000); } #ifdef CONFIG_BOCHS_VBE - if (kvm_enabled() && s->vbe_mapped) { - kvm_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size); + if (s->vbe_mapped) { + cpu_physical_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size); } #endif } void vga_dirty_log_stop(VGACommonState *s) { - if (kvm_enabled() && s->map_addr) - kvm_log_stop(s->map_addr, s->map_end - s->map_addr); + if (s->map_addr) { + cpu_physical_log_stop(s->map_addr, s->map_end - s->map_addr); + } - if (kvm_enabled() && s->lfb_vram_mapped) { - kvm_log_stop(isa_mem_base + 0xa0000, 0x8000); - kvm_log_stop(isa_mem_base + 0xa8000, 0x8000); + if (s->lfb_vram_mapped) { + cpu_physical_log_stop(isa_mem_base + 0xa0000, 0x8000); + cpu_physical_log_stop(isa_mem_base + 0xa8000, 0x8000); } #ifdef CONFIG_BOCHS_VBE - if (kvm_enabled() && s->vbe_mapped) { - kvm_log_stop(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size); + if (s->vbe_mapped) { + cpu_physical_log_stop(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size); } #endif } diff --git a/hw/vhost.c b/hw/vhost.c index 8586f66..5335178 100644 --- a/hw/vhost.c +++ b/hw/vhost.c @@ -439,6 +439,20 @@ static int vhost_client_migration_log(CPUPhysMemoryClient *client, return 0; } +static int vhost_client_log_start(CPUPhysMemoryClient *client, + target_phys_addr_t start_addr, + ram_addr_t size) +{ + return 0; +} + +static int vhost_client_log_stop(CPUPhysMemoryClient *client, + target_phys_addr_t start_addr, + ram_addr_t size) +{ + return 0; +} + static int vhost_virtqueue_init(struct vhost_dev *dev, struct VirtIODevice *vdev, struct vhost_virtqueue *vq, @@ -606,6 +620,8 @@ int vhost_dev_init(struct vhost_dev *hdev, int devfd) hdev->client.set_memory = vhost_client_set_memory; hdev->client.sync_dirty_bitmap = vhost_client_sync_dirty_bitmap; hdev->client.migration_log = vhost_client_migration_log; + hdev->client.log_start = vhost_client_log_start; + hdev->client.log_stop = vhost_client_log_stop; hdev->mem = qemu_mallocz(offsetof(struct vhost_memory, regions)); hdev->log = NULL; hdev->log_size = 0; diff --git a/kvm-all.c b/kvm-all.c index 37b99c7..aedfe33 100644 --- a/kvm-all.c +++ b/kvm-all.c @@ -267,14 +267,16 @@ static int kvm_dirty_pages_log_change(target_phys_addr_t phys_addr, return kvm_set_user_memory_region(s, mem); } -int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size) +static int kvm_log_start(CPUPhysMemoryClient *client, + target_phys_addr_t phys_addr, ram_addr_t size) { return kvm_dirty_pages_log_change(phys_addr, size, KVM_MEM_LOG_DIRTY_PAGES, KVM_MEM_LOG_DIRTY_PAGES); } -int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size) +static int kvm_log_stop(CPUPhysMemoryClient *client, + target_phys_addr_t phys_addr, ram_addr_t size) { return kvm_dirty_pages_log_change(phys_addr, size, 0, @@ -596,6 +598,8 @@ static CPUPhysMemoryClient kvm_cpu_phys_memory_client = { .set_memory = kvm_client_set_memory, .sync_dirty_bitmap = kvm_client_sync_dirty_bitmap, .migration_log = kvm_client_migration_log, + .log_start = kvm_log_start, + .log_stop = kvm_log_stop, }; int kvm_init(int smp_cpus) diff --git a/kvm-stub.c b/kvm-stub.c index 5384a4b..41324e4 100644 --- a/kvm-stub.c +++ b/kvm-stub.c @@ -33,16 +33,6 @@ int kvm_init_vcpu(CPUState *env) return -ENOSYS; } -int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size) -{ - return -ENOSYS; -} - -int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size) -{ - return -ENOSYS; -} - int kvm_coalesce_mmio_region(target_phys_addr_t start, ram_addr_t size) { return -ENOSYS; diff --git a/kvm.h b/kvm.h index 60a9b42..fc77b81 100644 --- a/kvm.h +++ b/kvm.h @@ -49,9 +49,6 @@ int kvm_init_vcpu(CPUState *env); int kvm_cpu_exec(CPUState *env); #if !defined(CONFIG_USER_ONLY) -int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size); -int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size); - void kvm_setup_guest_memory(void *start, size_t size); int kvm_coalesce_mmio_region(target_phys_addr_t start, ram_addr_t size);