| Message ID | 1500245798-20886-1-git-send-email-festevam@gmail.com |
|---|---|
| State | Accepted |
| Headers | show |
On Sun, Jul 16, 2017 at 07:56:38PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <fabio.estevam@nxp.com> > > The reset GPIO can be connected to a I2C or SPI IO expander, which > may sleep, so it is safer to use the gpiod_set_value_cansleep() > variant instead. > > Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Any opinion, Stanimir? > --- > drivers/pci/dwc/pcie-qcom.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c > index 68c5f2a..8359de0 100644 > --- a/drivers/pci/dwc/pcie-qcom.c > +++ b/drivers/pci/dwc/pcie-qcom.c > @@ -141,13 +141,13 @@ struct qcom_pcie { > > static void qcom_ep_reset_assert(struct qcom_pcie *pcie) > { > - gpiod_set_value(pcie->reset, 1); > + gpiod_set_value_cansleep(pcie->reset, 1); > usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); > } > > static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) > { > - gpiod_set_value(pcie->reset, 0); > + gpiod_set_value_cansleep(pcie->reset, 0); > usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); > } > > -- > 2.7.4 >
Hi, Thanks for the patch! On 07/17/2017 01:56 AM, Fabio Estevam wrote: > From: Fabio Estevam <fabio.estevam@nxp.com> > > The reset GPIO can be connected to a I2C or SPI IO expander, which > may sleep, so it is safer to use the gpiod_set_value_cansleep() > variant instead. > > Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> > --- > drivers/pci/dwc/pcie-qcom.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> > > diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c > index 68c5f2a..8359de0 100644 > --- a/drivers/pci/dwc/pcie-qcom.c > +++ b/drivers/pci/dwc/pcie-qcom.c > @@ -141,13 +141,13 @@ struct qcom_pcie { > > static void qcom_ep_reset_assert(struct qcom_pcie *pcie) > { > - gpiod_set_value(pcie->reset, 1); > + gpiod_set_value_cansleep(pcie->reset, 1); > usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); > } > > static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) > { > - gpiod_set_value(pcie->reset, 0); > + gpiod_set_value_cansleep(pcie->reset, 0); > usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); > } > >
On Sun, Jul 16, 2017 at 07:56:38PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <fabio.estevam@nxp.com> > > The reset GPIO can be connected to a I2C or SPI IO expander, which > may sleep, so it is safer to use the gpiod_set_value_cansleep() > variant instead. > > Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Applied with Stanimir's ack to pci/host-qcom for v4.14, thanks! > --- > drivers/pci/dwc/pcie-qcom.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c > index 68c5f2a..8359de0 100644 > --- a/drivers/pci/dwc/pcie-qcom.c > +++ b/drivers/pci/dwc/pcie-qcom.c > @@ -141,13 +141,13 @@ struct qcom_pcie { > > static void qcom_ep_reset_assert(struct qcom_pcie *pcie) > { > - gpiod_set_value(pcie->reset, 1); > + gpiod_set_value_cansleep(pcie->reset, 1); > usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); > } > > static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) > { > - gpiod_set_value(pcie->reset, 0); > + gpiod_set_value_cansleep(pcie->reset, 0); > usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); > } > > -- > 2.7.4 >
diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c index 68c5f2a..8359de0 100644 --- a/drivers/pci/dwc/pcie-qcom.c +++ b/drivers/pci/dwc/pcie-qcom.c @@ -141,13 +141,13 @@ struct qcom_pcie { static void qcom_ep_reset_assert(struct qcom_pcie *pcie) { - gpiod_set_value(pcie->reset, 1); + gpiod_set_value_cansleep(pcie->reset, 1); usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); } static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) { - gpiod_set_value(pcie->reset, 0); + gpiod_set_value_cansleep(pcie->reset, 0); usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); }