diff --git a/MAINTAINERS b/MAINTAINERS
index c46bc07..38056ce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -419,9 +419,7 @@ Heiko Schocher <hs@denx.de>
 	ids8247		MPC8247
 	jupiter		MPC5200
 	kmeter1		MPC8360
-	kmsupx4		MPC852T
 	mgcoge		MPC8247
-	mgsuvd		MPC852
 	mucmc52		MPC5200
 	muas3001	MPC8270
 	municse		MPC5200
diff --git a/board/keymile/km8xx/Makefile b/board/keymile/km8xx/Makefile
deleted file mode 100644
index abb9ef9..0000000
--- a/board/keymile/km8xx/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# (C) Copyright 2007
-# Heiko Schocher, DENX Software Engineering, hs@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
-		km8xx_hdlc_enet.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/keymile/km8xx/km8xx.c b/board/keymile/km8xx/km8xx.c
deleted file mode 100644
index 6de2f22..0000000
--- a/board/keymile/km8xx/km8xx.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * (C) Copyright 2007
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <mpc8xx.h>
-#include <net.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-
-#include "../common/common.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const uint sdram_table[] =
-{
-	0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x0ff77c00,
-	0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	/* 0x08 Burst Read */
-	0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x00fffc00,
-	0x00fffc00, 0x00fffc00, 0x0ff77c00, 0x1ffffc05,
-	/* 0x10 Load mode register */
-	0x0ffffc34, 0x0ff57c04, 0x0ffffc04, 0x1ffffc05,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	/* 0x18 Single Write */
-	0x0f07fc04, 0x0ffffc00, 0x00bd7c04, 0x0ffffc04,
-	0x0ff77c04, 0x1ffffc05, 0xfffffc04, 0xfffffc04,
-	/* 0x20 Burst Write */
-	0x0f07fc04, 0x0ffffc00, 0x00bd7c00, 0x00fffc00,
-	0x00fffc00, 0x00fffc04, 0x0ffffc04, 0x0ff77c04,
-	0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	/* 0x30 Precharge all and Refresh */
-	0x0ff77c04, 0x0ffffc04, 0x0ff5fc84, 0x0ffffc04,
-	0x0ffffc04, 0x0ffffc84, 0x1ffffc05, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	/* 0x3C Exception */
-	0x7ffffc04, 0xfffffc07, 0xfffffc04, 0xfffffc04,
-};
-
-int checkboard (void)
-{
-	puts ("Board: Keymile ");
-#if defined(CONFIG_KMSUPX4)
-	puts ("kmsupx4");
-#else
-	puts ("mgsuvd");
-#endif
-	if (ethernet_present ())
-		puts (" with PIGGY.");
-	puts ("\n");
-	return (0);
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size;
-
-	upmconfig (UPMB, (uint *) sdram_table,
-			   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	/*
-	 * The following value is used as an address (i.e. opcode) for
-	 * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
-	 * the port size is 32bit the SDRAM does NOT "see" the lower two
-	 * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
-	 * MICRON SDRAMs:
-	 * ->    0 00 010 0 010
-	 *       |  |   | |   +- Burst Length = 4
-	 *       |  |   | +----- Burst Type   = Sequential
-	 *       |  |   +------- CAS Latency  = 2
-	 *       |  +----------- Operating Mode = Standard
-	 *       +-------------- Write Burst Mode = Programmed Burst Length
-	 */
-	memctl->memc_mar = CONFIG_SYS_MAR;
-
-	/*
-	 * Map controller banks 1 to the SDRAM banks 1 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
-	memctl->memc_mbmr = CONFIG_SYS_MBMR & (~(MBMR_PTBE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80802830;	/* SDRAM bank 0 */
-	udelay (1);
-	memctl->memc_mcr = 0x80802110;	/* SDRAM bank 0 - execute twice */
-	udelay (1);
-
-	memctl->memc_mbmr |= MBMR_PTBE;	/* enable refresh */
-
-	udelay (1000);
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 */
-	size =  get_ram_size(SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
-
-	udelay (1000);
-
-	debug ("SDRAM Bank 0: %ld MB\n", size >> 20);
-
-	return (size);
-}
-
-/*
- * Early board initalization.
- */
-int board_early_init_r(void)
-{
-	/* setup the UPIOx */
-	/* General Unit Reset disabled, Flash Bank enabled, UnitLed on */
-	out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc2);
-	/* SCC4 enable, halfduplex, FCC1 powerdown, ANDI enable*/
-	out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x35);
-	return 0;
-}
-
-int hush_init_var (void)
-{
-	ivm_read_eeprom ();
-	return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-/*
- * update "brg" property in the blob
- */
-void ft_blob_update (void *blob, bd_t *bd)
-{
-	ulong brg_data[1] = {0};
-
-	/* BRG */
-	brg_data[0] = cpu_to_be32 (bd->bi_busfreq);
-	fdt_set_node_and_value (blob, "/soc/cpm", "brg-frequency", brg_data,
-				sizeof (brg_data));
-
-	/* MAC adr */
-	fdt_set_node_and_value (blob, "/soc/cpm/ethernet", "mac-address",
-				bd->bi_enetaddr, sizeof (u8) * 6);
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup (blob, bd);
-	ft_blob_update (blob, bd);
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
-
-int i2c_soft_read_pin (void)
-{
-	int val;
-
-	*(unsigned short *)(I2C_BASE_DIR) &=  ~SDA_CONF;
-	udelay(1);
-	val = *(unsigned char *)(I2C_BASE_PORT);
-
-	return ((val & SDA_BIT) == SDA_BIT);
-}
diff --git a/board/keymile/km8xx/km8xx_hdlc_enet.c
b/board/keymile/km8xx/km8xx_hdlc_enet.c
deleted file mode 100644
index ca00576..0000000
--- a/board/keymile/km8xx/km8xx_hdlc_enet.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
- *
- * Based in part on arch/powerpc/cpu/mpc8xx/scc.c.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>	/* commproc.h is included here */
-#include <malloc.h>
-#include <net.h>
-
-#ifdef CONFIG_KEYMILE_HDLC_ENET
-
-#include "../common/keymile_hdlc_enet.h"
-
-char keymile_slot;	/* our slot number in the backplane */
-
-/*
- * Since, except during initialization, ethact is always HDLC
- * while we're in the driver, just use serial_printf() everywhere for
- * output.  This avoids possible conflicts when netconsole is being
- * used.
- */
-#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
-
-static int already_inited;
-
-/*
-  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
-  *  immr->udata_bd address on Dual-Port RAM
-  * Provide for Double Buffering
-  */
-typedef volatile struct CommonBufferDescriptor {
-    cbd_t txbd;			/* Tx BD */
-    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
-void keymile_hdlc_enet_halt(struct eth_device *);
-extern void keymile_hdlc_enet_init_bds(RTXBD *);
-extern void initCachedNumbers(int);
-
-/* Use SCC4 */
-#define MGS_CPM_CR_HDLC	CPM_CR_CH_SCC4
-#define MGS_PROFF_HDLC	PROFF_SCC4
-#define MGS_SCC_HDLC	3	/* Index, not number! */
-
-int keymile_hdlc_enet_init(struct eth_device *dev, bd_t *bis)
-{
-	/* int i; */
-	/* volatile cbd_t *bdp; */
-	volatile cpm8xx_t *cp;
-	volatile scc_t *sccp;
-	volatile hdlc_pram_t *hpr;
-	volatile iop8xx_t *iop;
-
-	if (already_inited)
-		return 0;
-
-	cp = (cpm8xx_t *)&(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm);
-	hpr = (hdlc_pram_t *)(&cp->cp_dparam[MGS_PROFF_HDLC]);
-	sccp = (volatile scc_t *)(&cp->cp_scc[MGS_SCC_HDLC]);
-	iop = (iop8xx_t *)&(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport);
-
-	/*
-	 * Disable receive and transmit just in case.
-	 */
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-#ifndef CONFIG_SYS_ALLOC_DPRAM
-#error "CONFIG_SYS_ALLOC_DPRAM must be defined"
-#else
-	/*
-	 * Avoid exhausting DPRAM, which would cause a panic.
-	 * Actually this isn't really necessary, but leave it here
-	 * for safety's sake.
-	 */
-	if (rtx == NULL) {
-		rtx = (RTXBD *) (cp->cp_dpmem +
-			 dpram_alloc_align(sizeof(RTXBD), 8));
-		if (rtx == (RTXBD *)CPM_DP_NOSPACE)
-			return -1;
-		memset((void *)rtx, 0, sizeof(RTXBD));
-	}
-#endif /* !CONFIG_SYS_ALLOC_DPRAM */
-
-	/* We need the slot number for addressing. */
-	keymile_slot = *(char *)(CONFIG_SYS_SLOT_ID_BASE +
-		CONFIG_SYS_SLOT_ID_OFF) & CONFIG_SYS_SLOT_ID_MASK;
-	/*
-	 * Be consistent with the Linux driver and set
-	 * only enetaddr[0].
-	 *
-	 * Always add 1 to the slot number so that
-	 * there are no problems with an ethaddr which
-	 * is all 0s.  This should be acceptable because
-	 * a board should never have a slot number of 255,
-	 * which is the broadcast address.  The HDLC addressing
-	 * uses only the slot number.
-	 */
-	dev->enetaddr[0] = keymile_slot + 1;
-
-#ifdef TEST_IT
-	dprintf("slot %d\n", keymile_slot);
-#endif
-
-	/* use pa8, pa9 pins for TXD4, RXD4 respectively */
-	iop->iop_papar |= ((0x8000 >> 8) | (0x8000 >> 9));
-	iop->iop_padir &= ~((0x8000 >> 8) | (0x8000 >> 9));
-	iop->iop_paodr &= ~((0x8000 >> 8) | (0x8000 >> 9));
-
-	/* also use pa0 as CLK8 */
-	iop->iop_papar |= 0x8000;
-	iop->iop_padir &= ~0x8000;
-	iop->iop_paodr &= ~0x8000;
-
-	/* use pc5 as CTS4 */
-	iop->iop_pcpar &= ~(0x8000 >> 5);
-	iop->iop_pcdir &= ~(0x8000 >> 5);
-	iop->iop_pcso  |= (0x8000 >> 5);
-
-	/*
-	 * SI clock routing
-	 * use CLK8
-	 * this also connects SCC4 to NMSI
-	 */
-	cp->cp_sicr = (cp->cp_sicr & ~0xff000000) | 0x3f000000;
-
-	/* keymile_rxIdx = 0; */
-
-	/*
-	 * Initialize function code registers for big-endian.
-	 */
-	hpr->rfcr = SCC_EB;
-	hpr->tfcr = SCC_EB;
-
-	/*
-	 * Set maximum bytes per receive buffer.
-	 */
-	hpr->mrblr = MAX_FRAME_LENGTH;
-
-	/* Setup CRC generator values for HDLC */
-	hpr->c_mask = 0x0000F0B8;
-	hpr->c_pres = 0x0000FFFF;
-
-	/* Initialize all error counters to 0 */
-	hpr->disfc = 0;
-	hpr->crcec = 0;
-	hpr->abtsc = 0;
-	hpr->nmarc = 0;
-	hpr->retrc = 0;
-
-	/* Set maximum frame length size */
-	hpr->mflr = MAX_FRAME_LENGTH;
-
-	/* set to 1 for per frame processing change later if needed */
-	hpr->rfthr = 1;
-
-	hpr->hmask = 0xff;
-
-	hpr->haddr2 = SET_HDLC_UUA(keymile_slot);
-	hpr->haddr3 = hpr->haddr2;
-	hpr->haddr4 = hpr->haddr2;
-	/* broadcast */
-	hpr->haddr1 = HDLC_BCAST;
-
-	hpr->rbase = (unsigned int) &rtx->rxbd[0];
-	hpr->tbase = (unsigned int) &rtx->txbd;
-
-#if 0
-	/*
-	 * Initialize the buffer descriptors.
-	 */
-	bdp = &rtx->txbd;
-	bdp->cbd_sc = 0;
-	bdp->cbd_bufaddr = 0;
-	bdp->cbd_sc = BD_SC_WRAP;
-
-	/*
-	 *	Setup RX packet buffers, aligned correctly.
-	 *	Borrowed from net/net.c.
-	 */
-	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
-	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
-	for (i = 1; i < HDLC_PKTBUFSRX; i++)
-		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
-
-	bdp = &rtx->rxbd[0];
-	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
-		bdp->cbd_sc = BD_SC_EMPTY;
-		/* Leave space at the start for INET header. */
-		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
-			INET_HDR_ALIGN);
-		bdp++;
-	}
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-#else
-	keymile_hdlc_enet_init_bds(rtx);
-#endif
-
-	/* Let's re-initialize the channel now.	 We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cp->cp_cpcr = mk_cr_cmd(MGS_CPM_CR_HDLC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	sccp->scc_gsmrl = SCC_GSMRL_MODE_HDLC;
-	/* CTSS=1 */
-	sccp->scc_gsmrh = SCC_GSMRH_CTSS;
-	/* NOF=0, RTE=1, DRT=0, BUS=1 */
-	sccp->scc_psmr = ((0x8000 >> 6) | (0x8000 >> 10));
-
-/* loopback for local testing */
-#ifdef GJTEST
-	dprintf("LOOPBACK!\n");
-	sccp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
-#endif
-
-	/*
-	 * Disable all interrupts and clear all pending
-	 * events.
-	 */
-	sccp->scc_sccm = 0;
-	sccp->scc_scce = 0xffff;
-
-	/*
-	 * And last, enable the transmit and receive processing.
-	 */
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	dprintf("%s: HDLC ENET Version 0.3 on SCC%d\n", dev->name,
-		MGS_SCC_HDLC + 1);
-
-	/*
-	 * We may not get an ARP packet because ARP was already done on
-	 * a different interface, so initialize the cached values now.
-	 */
-	initCachedNumbers(1);
-
-	already_inited = 1;
-
-	return 0;
-}
-
-void keymile_hdlc_enet_halt(struct eth_device *dev)
-{
-#if 0 /* just return, but keep this for reference */
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	/* maybe should do a graceful stop here? */
-	immr->im_cpm.cp_scc[MGS_SCC_HDLC].scc_gsmrl &=
-		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-}
-
-#endif /* CONFIG_KEYMILE_HDLC_ENET */
diff --git a/board/keymile/km8xx/u-boot.lds b/board/keymile/km8xx/u-boot.lds
deleted file mode 100644
index ea70ae4..0000000
--- a/board/keymile/km8xx/u-boot.lds
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    KEEP(*(.got))
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/boards.cfg b/boards.cfg
index 4bc3d08..c5c0489 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -594,8 +594,6 @@ SXNI855T                     powerpc     mpc8xx      sixnet
 v37                          powerpc     mpc8xx
 MHPC                         powerpc     mpc8xx      mhpc                eltec
 TOP860                       powerpc     mpc8xx      top860              emk
-kmsupx4                      powerpc     mpc8xx      km8xx               keymile
-mgsuvd                       powerpc     mpc8xx      km8xx               keymile
 KUP4K                        powerpc     mpc8xx      kup4k               kup
 KUP4X                        powerpc     mpc8xx      kup4x               kup
 ELPT860                      powerpc     mpc8xx      elpt860             LEOX
diff --git a/include/configs/km8xx.h b/include/configs/km8xx.h
deleted file mode 100644
index 9938acd..0000000
--- a/include/configs/km8xx.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * (C) Copyright 2009
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * configuration options, keymile 8xx board specific
- */
-
-#ifndef __CONFIG_KM8XX_H
-#define __CONFIG_KM8XX_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_KM8XX		1	/* on a km8xx board */
-
-/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-#include "km-powerpc.h"
-
-#if defined(CONFIG_KMSUPX4)
-#undef	CONFIG_I2C_MUX			/* no I2C mux on this board */
-#endif
-
-#define CONFIG_8xx_GCLK_FREQ		66000000
-
-#define CONFIG_SYS_SMC_UCODE_PATCH	1	/* Relocate SMC1 */
-#define CONFIG_SYS_SMC_DPMEM_OFFSET	0x1fc0
-#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1 */
-#define CONFIG_SYS_SMC_RXBUFLEN	128
-#define CONFIG_SYS_MAXIDLE	10
-
-#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR	0x1eb0	/* In case of SMC relocation,
-						 * the default value is not
-						 * working
-						 */
-
-#define CONFIG_PREBOOT	"echo;" \
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#define BOOTFLASH_START	0xF0000000
-
-#define CONFIG_KM_CONSOLE_TTY	"ttyCPM0"
-
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_ENV_IVM	"EEprom_ivm=pca9544a:70:4 \0"
-#else
-#define CONFIG_ENV_IVM	""
-#endif
-
-#define MTDIDS_DEFAULT		"nor0=boot"
-#define MTDPARTS_DEFAULT	"mtdparts="				\
-	"boot:"								\
-		"768k(u-boot),"						\
-		"128k(env),"						\
-		"128k(envred),"						\
-		"-(" CONFIG_KM_UBI_PARTITION_NAME ")"
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_ENV_IVM							\
-	CONFIG_KM_DEF_ENV						\
-	"mtdids=" MTDIDS_DEFAULT "\0"					\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
-	"newenv="							\
-		"prot off 0xF00C0000 0xF00FFFFF && "			\
-		"era 0xF00C0000 0xF00FFFFF\0"				\
-	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	""
-
-#undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
-
-#define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE -
GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xf0000000
-#define CONFIG_SYS_MONITOR_LEN		(768 << 10) /* 768 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_FLASH_SIZE		32
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT	256
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	CONFIG_SYS_MONITOR_LEN
-#define CONFIG_ENV_SECT_SIZE	0x20000 /* Total Size of Environment Sector */
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-#define CONFIG_ENV_BUFFER_PRINT		1
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#define CONFIG_SYS_SYPCR	0xffffff89
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_SYS_SIUMCR	0x00610480
-#else
-#define CONFIG_SYS_SIUMCR	0x00610400
-#endif
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#if defined(CONFIG_MGSUVD)
-#define SCCR_MASK	0x01800000
-#else
-#define SCCR_MASK	0x00000000
-#endif
-#define CONFIG_SYS_SCCR	0x01800000
-
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0xf0000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/*
- * FLASH timing: Default value of OR0 after reset
- */
-#define CONFIG_SYS_OR0_PRELIM	0xfe000954
-#define CONFIG_SYS_BR0_PRELIM	0xf0000401
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define SDRAM_MAX_SIZE		(64 << 20)	/* max 64 MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
-
-#define CONFIG_SYS_OR1_PRELIM	0xfc000800
-#define CONFIG_SYS_BR1_PRELIM	(0x000000C0 | 0x01)
-
-#define CONFIG_SYS_MPTPR	0x0200
-/* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used),
-   1 Write loop Cycle (not used), 1 Timer Loop Cycle */
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_SYS_MBMR	0x10964111
-#else
-#define CONFIG_SYS_MBMR	0x20964111
-#endif
-#define CONFIG_SYS_MAR		0x00000088
-
-/*
- * 4096	Rows from SDRAM example configuration
- * 1000	factor s -> ms
- * 64	PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4	Number of refresh cycles per period
- * 64	Refresh cycle in ms per number of rows
- */
-#define CONFIG_SYS_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
-
-/* GPIO/PIGGY on CS3 initialization values
-*/
-#define CONFIG_SYS_PIGGY_BASE	(0x30000000)
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_SYS_OR3_PRELIM	(0xfe000d24)
-#define CONFIG_SYS_BR3_PRELIM	(0x30000401)
-#else
-#define CONFIG_SYS_OR3_PRELIM	(0xf8000d26)
-#define CONFIG_SYS_BR3_PRELIM	(0x30000401)
-#endif
-
-#define CONFIG_SCC3_ENET
-#define CONFIG_ETHPRIME		"SCC"
-#define CONFIG_HAS_ETH0
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_STDOUT_PATH		"/soc/cpm/serial@a80"
-
-/* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support */
-#define	CONFIG_SOFT_I2C		1	/* I2C bit-banged	*/
-/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define I2C_SOFT_DECLARATIONS
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define I2C_BASE_DIR	((u16 *)(CONFIG_SYS_PIGGY_BASE + 0x04))
-#define I2C_BASE_PORT	((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x09))
-
-#define SDA_BIT		0x40
-#define SCL_BIT		0x80
-#define SDA_CONF	0x1000
-#define SCL_CONF	0x2000
-
-#define I2C_ACTIVE	do {} while (0)
-#define I2C_TRISTATE	do {} while (0)
-#define I2C_READ	((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT)
-#define I2C_SDA(bit)	if(bit) { \
-				clrbits(be16, I2C_BASE_DIR, SDA_CONF); \
-			} else { \
-				clrbits(8, I2C_BASE_PORT, SDA_BIT); \
-				setbits(be16, I2C_BASE_DIR, SDA_CONF); \
-			}
-#define I2C_SCL(bit)	if(bit) { \
-				clrbits(be16, I2C_BASE_DIR, SCL_CONF); \
-			} else { \
-				clrbits(8, I2C_BASE_PORT, SCL_BIT); \
-				setbits(be16, I2C_BASE_DIR, SCL_CONF); \
-			}
-#define I2C_DELAY	udelay(50)	/* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-
-/* I2C SYSMON (LM75, AD7414 is almost compatible)		*/
-#define CONFIG_DTT_LM75		1	/* ON Semi's LM75	*/
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_DTT_SENSORS	{0, 2, 4, 6}	/* Sensor addresses */
-#else
-#define CONFIG_DTT_SENSORS	{0}	/* Sensor addresses */
-#endif
-#define CONFIG_SYS_DTT_MAX_TEMP	70
-#define CONFIG_SYS_DTT_LOW_TEMP	-30
-#define CONFIG_SYS_DTT_HYSTERESIS	3
-#define CONFIG_SYS_DTT_BUS_NUM		(CONFIG_SYS_MAX_I2C_BUS)
-#endif	/* __CONFIG_KM8XX_H */
diff --git a/include/configs/kmsupx4.h b/include/configs/kmsupx4.h
deleted file mode 100644
index 228bdd7..0000000
--- a/include/configs/kmsupx4.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2009
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC852T		1	/* This is a MPC852T CPU	*/
-#define CONFIG_KMSUPX4		1	/* ...on a kmsupx4 board	*/
-#define CONFIG_HOSTNAME		kmsupx4
-
-#define	CONFIG_SYS_TEXT_BASE	0xf0000000
-
-/* include common defines/options for all Keymile 8xx boards */
-#include "km8xx.h"
-
-#define CONFIG_SYS_DELAYED_ICACHE	1	/* enable ICache not before
-						 * running in RAM.
-						 */
-#endif	/* __CONFIG_H */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
deleted file mode 100644
index 6036da8..0000000
--- a/include/configs/mgsuvd.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2007
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC866		1	/* This is a MPC866 CPU		*/
-#define CONFIG_MGSUVD		1	/* ...on a mgsuvd board	*/
-#define CONFIG_HOSTNAME		mgsuvd
-
-#define	CONFIG_SYS_TEXT_BASE	0xf0000000
-
-/* include common defines/options for all Keymile 8xx boards */
-#include "km8xx.h"
-
-#endif	/* __CONFIG_H */
