@@ -1,7 +1,7 @@
SLOF_DIR := $(SRC_PATH)/roms/SLOF
-NETOBJS := start.o sclp.o virtio.o netmain.o sbrk.o libc.a
+NETOBJS := start.o sclp.o virtio.o virtio-net.o netmain.o sbrk.o libc.a
LIBC_INC := -I$(SLOF_DIR)/lib/libc/include
LIBNET_INC := -I$(SLOF_DIR)/lib/libnet
new file mode 100644
@@ -0,0 +1,135 @@
+/*
+ * Virtio-net driver for the s390-ccw firmware
+ *
+ * Copyright 2017 Thomas Huth, Red Hat Inc.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/socket.h>
+#include <ethernet.h>
+#include "s390-ccw.h"
+#include "virtio.h"
+
+#ifndef DEBUG_VIRTIO_NET
+#define DEBUG_VIRTIO_NET 0
+#endif
+
+#define VIRTIO_NET_F_MAC_BIT (1 << 5)
+
+#define VQ_RX 0 /* Receive queue */
+#define VQ_TX 1 /* Transmit queue */
+
+struct VirtioNetHdr {
+ uint8_t flags;
+ uint8_t gso_type;
+ uint16_t hdr_len;
+ uint16_t gso_size;
+ uint16_t csum_start;
+ uint16_t csum_offset;
+ /*uint16_t num_buffers;*/ /* Only with VIRTIO_NET_F_MRG_RXBUF or VIRTIO1 */
+};
+typedef struct VirtioNetHdr VirtioNetHdr;
+
+static uint16_t rx_last_idx; /* Last index in receive queue "used" ring */
+
+int virtio_net_init(void *mac_addr)
+{
+ VDev *vdev = virtio_get_device();
+ VRing *rxvq = &vdev->vrings[VQ_RX];
+ void *buf;
+ int i;
+
+ vdev->guest_features[0] = VIRTIO_NET_F_MAC_BIT;
+ virtio_setup_ccw(vdev);
+
+ IPL_assert(vdev->guest_features[0] & VIRTIO_NET_F_MAC_BIT,
+ "virtio-net device does not support the MAC address feature");
+ memcpy(mac_addr, vdev->config.net.mac, ETH_ALEN);
+
+ for (i = 0; i < 64; i++) {
+ buf = malloc(ETH_MTU_SIZE + sizeof(VirtioNetHdr));
+ IPL_assert(buf != NULL, "Can not allocate memory for receive buffers");
+ vring_send_buf(rxvq, buf, ETH_MTU_SIZE + sizeof(VirtioNetHdr),
+ VRING_DESC_F_WRITE);
+ }
+ vring_notify(rxvq);
+
+ return 0;
+}
+
+int send(int fd, const void *buf, int len, int flags)
+{
+ VirtioNetHdr tx_hdr;
+ VDev *vdev = virtio_get_device();
+ VRing *txvq = &vdev->vrings[VQ_TX];
+
+ /* Set up header - we do not use anything special, so simply clear it */
+ memset(&tx_hdr, 0, sizeof(tx_hdr));
+
+ vring_send_buf(txvq, &tx_hdr, sizeof(tx_hdr), VRING_DESC_F_NEXT);
+ vring_send_buf(txvq, (void *)buf, len, VRING_HIDDEN_IS_CHAIN);
+ while (!vr_poll(txvq)) {
+ yield();
+ }
+ if (drain_irqs(txvq->schid)) {
+ puts("send: drain irqs failed");
+ return -1;
+ }
+
+ return len;
+}
+
+int recv(int fd, void *buf, int maxlen, int flags)
+{
+ VDev *vdev = virtio_get_device();
+ VRing *rxvq = &vdev->vrings[VQ_RX];
+ int len, id;
+ uint8_t *pkt;
+
+ if (rx_last_idx == rxvq->used->idx) {
+ return 0;
+ }
+
+ len = rxvq->used->ring[rx_last_idx % rxvq->num].len - sizeof(VirtioNetHdr);
+ if (len > maxlen) {
+ puts("virtio-net: Receive buffer too small");
+ len = maxlen;
+ }
+ id = rxvq->used->ring[rx_last_idx % rxvq->num].id % rxvq->num;
+ pkt = (uint8_t *)(rxvq->desc[id].addr + sizeof(VirtioNetHdr));
+
+#if DEBUG_VIRTIO_NET /* Dump packet */
+ int i;
+ printf("\nbuf %p: len=%i\n", (void *)rxvq->desc[id].addr, len);
+ for (i = 0; i < 64; i++) {
+ printf(" %02x", pkt[i]);
+ if ((i % 16) == 15) {
+ printf("\n");
+ }
+ }
+ printf("\n");
+#endif
+
+ /* Copy data to destination buffer */
+ memcpy(buf, pkt, len);
+
+ /* Mark buffer as available to the host again */
+ rxvq->avail->ring[rxvq->avail->idx % rxvq->num] = id;
+ rxvq->avail->idx = rxvq->avail->idx + 1;
+ vring_notify(rxvq);
+
+ /* Move index to next entry */
+ rx_last_idx = rx_last_idx + 1;
+
+ return len;
+}
@@ -266,6 +266,11 @@ void virtio_setup_ccw(VDev *vdev)
run_ccw(vdev, CCW_CMD_VDEV_RESET, NULL, 0);
switch (vdev->senseid.cu_model) {
+ case VIRTIO_ID_NET:
+ vdev->nr_vqs = 2;
+ vdev->cmd_vr_idx = 0;
+ cfg_size = sizeof(vdev->config.net);
+ break;
case VIRTIO_ID_BLOCK:
vdev->nr_vqs = 1;
vdev->cmd_vr_idx = 0;
@@ -11,8 +11,6 @@
#ifndef VIRTIO_H
#define VIRTIO_H
-#include "s390-ccw.h"
-
/* Status byte for guest to report progress, and synchronize features. */
/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1
@@ -227,6 +225,13 @@ struct ScsiDevice {
};
typedef struct ScsiDevice ScsiDevice;
+struct VirtioNetConfig {
+ uint8_t mac[6];
+ /* uint16_t status; */ /* Only with VIRTIO_NET_F_STATUS */
+ /* uint16_t max_virtqueue_pairs; */ /* Only with VIRTIO_NET_F_MQ */
+};
+typedef struct VirtioNetConfig VirtioNetConfig;
+
struct VDev {
int nr_vqs;
VRing *vrings;
@@ -239,6 +244,7 @@ struct VDev {
union {
VirtioBlkConfig blk;
VirtioScsiConfig scsi;
+ VirtioNetConfig net;
} config;
ScsiDevice *scsi_device;
bool is_cdrom;
@@ -273,4 +279,6 @@ int vring_wait_reply(void);
int virtio_run(VDev *vdev, int vqid, VirtioCmd *cmd);
void virtio_setup_ccw(VDev *vdev);
+int virtio_net_init(void *mac_addr);
+
#endif /* VIRTIO_H */
The driver provides the recv() and send() functions which will be required by SLOF's libnet code for receiving and sending packets. Signed-off-by: Thomas Huth <thuth@redhat.com> --- pc-bios/s390-ccw/netboot.mak | 2 +- pc-bios/s390-ccw/virtio-net.c | 135 ++++++++++++++++++++++++++++++++++++++++++ pc-bios/s390-ccw/virtio.c | 5 ++ pc-bios/s390-ccw/virtio.h | 12 +++- 4 files changed, 151 insertions(+), 3 deletions(-) create mode 100644 pc-bios/s390-ccw/virtio-net.c